From: Ivan Vecera <ivecera@redhat.com>
To: netdev@vger.kernel.org
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Jiri Pirko <jiri@resnulli.us>, Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Randy Dunlap <rdunlap@infradead.org>,
Min Li <min.li@microchip.com>,
Tony Nguyen <anthony.l.nguyen@intel.com>,
Przemek Kitszel <przemyslaw.kitszel@intel.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
intel-wired-lan@lists.osuosl.org,
Grzegorz Nitka <grzegorz.nitka@intel.com>,
Karol Kolacinski <karol.kolacinski@intel.com>,
Saeed Mahameed <saeedm@nvidia.com>,
Tariq Toukan <tariqt@nvidia.com>, Petr Oros <poros@redhat.com>
Subject: [PATCH net-next 02/10] ice: dpll: serialize changes of the SyncE CGU registers
Date: Fri, 6 Nov 2026 13:09:57 +0100 [thread overview]
Message-ID: <20261106121005.1327603-3-ivecera@redhat.com> (raw)
In-Reply-To: <20261106121005.1327603-1-ivecera@redhat.com>
On dual complex E825 only complex 0 has a functional CGU and the second
complex reaches it through cgu_peer, so PFs of both complexes share the
CGU registers R10 and R11. They read, modify and write them when the
state of an RCLK pin changes, and ice_ptp_link_change() rewrites R10 when
a link changes, under the pf->dplls.lock of their own PF only.
ice_ptp_link_change() does not hold dpll_lock, so it can already overwrite
an update of another PF. RCLK callbacks are serialized by dpll_lock, but
the DPLL core is going to serialize callbacks per (module, clock_id), and
each complex has its own DSN and so its own clock_id. With that change, a
test toggling RCLK pins of both complexes lost an update.
Add a mutex to struct ice_adapter, which all E825C PFs share, and hold it
around these sequences.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
drivers/net/ethernet/intel/ice/ice_adapter.c | 2 ++
drivers/net/ethernet/intel/ice/ice_adapter.h | 4 ++++
drivers/net/ethernet/intel/ice/ice_dpll.c | 11 ++++++-----
drivers/net/ethernet/intel/ice/ice_dpll.h | 4 ++++
drivers/net/ethernet/intel/ice/ice_ptp.c | 2 ++
drivers/net/ethernet/intel/ice/ice_tspll.c | 4 ++--
6 files changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_adapter.c b/drivers/net/ethernet/intel/ice/ice_adapter.c
index 536923b6ae979d..aa2d8addae5bef 100644
--- a/drivers/net/ethernet/intel/ice/ice_adapter.c
+++ b/drivers/net/ethernet/intel/ice/ice_adapter.c
@@ -72,6 +72,7 @@ static struct ice_adapter *ice_adapter_new(struct pci_dev *pdev)
spin_lock_init(&adapter->txq_ctx_lock);
for (int i = 0; i < ARRAY_SIZE(adapter->cpi_phy_lock); i++)
mutex_init(&adapter->cpi_phy_lock[i]);
+ mutex_init(&adapter->cgu_synce_lock);
refcount_set(&adapter->refcount, 1);
spin_lock_init(&adapter->ports.lock);
@@ -85,6 +86,7 @@ static void ice_adapter_free(struct ice_adapter *adapter)
WARN_ON(!list_empty(&adapter->ports.list));
for (int i = 0; i < ARRAY_SIZE(adapter->cpi_phy_lock); i++)
mutex_destroy(&adapter->cpi_phy_lock[i]);
+ mutex_destroy(&adapter->cgu_synce_lock);
cleanup_srcu_struct(&adapter->ports.srcu);
diff --git a/drivers/net/ethernet/intel/ice/ice_adapter.h b/drivers/net/ethernet/intel/ice/ice_adapter.h
index c61bd645e460de..fd5585005d91ba 100644
--- a/drivers/net/ethernet/intel/ice/ice_adapter.h
+++ b/drivers/net/ethernet/intel/ice/ice_adapter.h
@@ -41,6 +41,8 @@ struct ice_port_list {
* @txq_ctx_lock: Spinlock protecting access to the GLCOMM_QTX_CNTX_CTL register
* @cpi_phy_lock: Per-PHY mutex serializing CPI REQ/ACK transactions.
* Index 0 = PHY0, index 1 = PHY1. Used on E825C devices.
+ * @cgu_synce_lock: Mutex serializing changes of the CGU registers R10 and R11,
+ * which all PFs reach. Used on E825C devices.
* @ctrl_pf: Control PF of the adapter
* @ports: Ports list
* @index: 64-bit index cached for collision detection on 32bit systems
@@ -53,6 +55,8 @@ struct ice_adapter {
spinlock_t txq_ctx_lock;
/* Serialize CPI REQ/ACK transactions per PHY (E825C only) */
struct mutex cpi_phy_lock[ICE_E825_MAX_PHYS];
+ /* Serialize changes of the SyncE CGU registers (E825C only) */
+ struct mutex cgu_synce_lock;
struct ice_pf *ctrl_pf;
struct ice_port_list ports;
diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c b/drivers/net/ethernet/intel/ice/ice_dpll.c
index bdbcf7af296eb4..d6302409a2dacf 100644
--- a/drivers/net/ethernet/intel/ice/ice_dpll.c
+++ b/drivers/net/ethernet/intel/ice/ice_dpll.c
@@ -2027,7 +2027,7 @@ ice_dpll_phase_offset_get(const struct dpll_pin *pin, void *pin_priv,
*
* DPLL subsystem callback. Set proper signals to recover clock from port.
*
- * Context: Called under pf->dplls.lock
+ * Context: Called under pf->dplls.lock, acquires adapter->cgu_synce_lock
* Return:
* * 0 - success
* * negative - error
@@ -2035,14 +2035,15 @@ ice_dpll_phase_offset_get(const struct dpll_pin *pin, void *pin_priv,
static int ice_dpll_synce_update_e825c(struct ice_hw *hw, bool ena,
u32 port_num, enum ice_synce_clk output)
{
+ struct ice_pf *pf = hw->back;
int err;
+ mutex_lock(&pf->adapter->cgu_synce_lock);
/* configure the mux to deliver proper signal to DPLL from the MUX */
err = ice_tspll_cfg_bypass_mux_e825c(hw, ena, port_num, output);
- if (err)
- return err;
-
- err = ice_tspll_cfg_synce_ethdiv_e825c(hw, output);
+ if (!err)
+ err = ice_tspll_cfg_synce_ethdiv_e825c(hw, output);
+ mutex_unlock(&pf->adapter->cgu_synce_lock);
if (err)
return err;
diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.h b/drivers/net/ethernet/intel/ice/ice_dpll.h
index bce0bea9a664bc..4ba76e2e2e0b01 100644
--- a/drivers/net/ethernet/intel/ice/ice_dpll.h
+++ b/drivers/net/ethernet/intel/ice/ice_dpll.h
@@ -158,6 +158,7 @@ struct ice_dpll {
* txclk_notify_rwsem (read)
* -> pf->dplls.lock
* -> ctrl_pf->dplls.lock
+ * -> adapter->cgu_synce_lock
*
* - @lock serializes all DPLL state mutations on this PF. When the
* controlling PF's lock must also be taken (e.g. updating the shared
@@ -169,6 +170,9 @@ struct ice_dpll {
* dpll_*_change_ntf() calls. ice_dpll_deinit() takes the write side
* standalone (not nested under any other lock) to drain in-flight
* readers before pins and the TXC DPLL device are freed.
+ * - adapter->cgu_synce_lock serializes changes of the CGU registers R10 and
+ * R11. All PFs of a dual complex E825 reach one CGU, so @lock does not
+ * cover them.
*/
struct ice_dplls {
struct kthread_worker *kworker;
diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c
index 3df08714510da5..4d4b6aaaf30c29 100644
--- a/drivers/net/ethernet/intel/ice/ice_ptp.c
+++ b/drivers/net/ethernet/intel/ice/ice_ptp.c
@@ -1395,7 +1395,9 @@ void ice_ptp_link_change(struct ice_pf *pf, bool linkup)
break;
}
+ mutex_lock(&pf->adapter->cgu_synce_lock);
err = ice_tspll_cfg_synce_ethdiv_e825c(hw, clk_pin);
+ mutex_unlock(&pf->adapter->cgu_synce_lock);
if (active && err) {
dev_err_once(ice_pf_to_dev(pf),
"Failed to configure SyncE ETH divider for pin %d, err %d\n",
diff --git a/drivers/net/ethernet/intel/ice/ice_tspll.c b/drivers/net/ethernet/intel/ice/ice_tspll.c
index 85bacb7c3a7903..b99e02cfe559bd 100644
--- a/drivers/net/ethernet/intel/ice/ice_tspll.c
+++ b/drivers/net/ethernet/intel/ice/ice_tspll.c
@@ -792,7 +792,7 @@ int ice_tspll_bypass_mux_active_e825c(struct ice_hw *hw, u8 port, bool *active,
*
* Set reference clock source and output clock selection.
*
- * Context: Called under pf->dplls.lock
+ * Context: Called under pf->dplls.lock and adapter->cgu_synce_lock
* Return:
* * 0 - success
* * negative - error
@@ -898,7 +898,7 @@ static int ice_tspll_get_div_e825c(u16 link_speed, unsigned int *divider)
*
* Set the correct CGU divider for RCLKA or RCLKB.
*
- * Context: Called under pf->dplls.lock
+ * Context: Called under pf->dplls.lock and adapter->cgu_synce_lock
* Return:
* * 0 - success
* * negative - error
--
2.56.0
next prev parent reply other threads:[~2026-11-06 12:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-06 12:09 [PATCH net-next 00/10] dpll: do not serialize driver callbacks under global dpll_lock Ivan Vecera
2026-11-06 12:09 ` [PATCH net-next 01/10] ice: dpll: notify TSPLL lock status from the periodic work only Ivan Vecera
2026-11-06 12:09 ` Ivan Vecera [this message]
2026-11-06 12:09 ` [PATCH net-next 03/10] dpll: add domain object Ivan Vecera
2026-11-06 12:09 ` [PATCH net-next 04/10] dpll: take domain locks around driver callbacks Ivan Vecera
2026-11-06 12:10 ` [PATCH net-next 05/10] dpll: convert dpll_lock to rwsem Ivan Vecera
2026-11-06 12:10 ` [PATCH net-next 06/10] dpll: add KUnit tests for core locking Ivan Vecera
2026-11-06 12:10 ` [PATCH net-next 07/10] dpll: reject measured_freq_get for foreign and on-pin registrations Ivan Vecera
2026-11-06 12:10 ` [PATCH net-next 08/10] dpll: zl3073x: update locking comments Ivan Vecera
2026-11-06 12:10 ` [PATCH net-next 09/10] ice: dpll: " Ivan Vecera
2026-11-06 12:10 ` [PATCH net-next 10/10] dpll: document locking rules Ivan Vecera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261106121005.1327603-3-ivecera@redhat.com \
--to=ivecera@redhat.com \
--cc=andrew+netdev@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=grzegorz.nitka@intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jiri@resnulli.us \
--cc=karol.kolacinski@intel.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=min.li@microchip.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=poros@redhat.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=rdunlap@infradead.org \
--cc=richardcochran@gmail.com \
--cc=saeedm@nvidia.com \
--cc=skhan@linuxfoundation.org \
--cc=tariqt@nvidia.com \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®