[PATCH 3/3] arm64: dts: ti: k3-j722s-evm: Add orientation to IMX219 sensors

[Thorsten Lannynd <t-lannynd@ti.com>]

The IMX219 CSI2 expansion modules are externally attached. Without the
orientation property, V4L2_CID_CAMERA_ORIENTATION (0x009a0922) is not
exposed and libcamera fails with:

  ERROR CameraSensor camera_sensor_raw.cpp:465 'imx219 4-0010':
  Mandatory V4L2 control 0x009a0922 not available

Set orientation = <MEDIA_ORIENTATION_EXTERNAL> on all four sensor nodes
to fix this.

Signed-off-by: Thorsten Lannynd <t-lannynd@ti.com>
---
 .../boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso   | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
index 4107ef8c7b74..5d03e199b321 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtso
@@ -11,6 +11,7 @@
 /plugin/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interface-devices.h>
 #include "k3-pinctrl.h"
 
 &main_pmx0 {
@@ -106,6 +107,7 @@ imx219_0: sensor@10 {
 			pinctrl-0 = <&cam0_reset_pins_default>;
 
 			reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_HIGH>;
+			orientation = <MEDIA_ORIENTATION_EXTERNAL>;
 
 			port {
 				csi2_cam0: endpoint {
@@ -138,6 +140,7 @@ imx219_1: sensor@10 {
 			pinctrl-0 = <&cam1_reset_pins_default>;
 
 			reset-gpios = <&main_gpio0 17 GPIO_ACTIVE_HIGH>;
+			orientation = <MEDIA_ORIENTATION_EXTERNAL>;
 
 			port {
 				csi2_cam1: endpoint {
@@ -175,6 +178,7 @@ imx219_2: sensor@10 {
 			pinctrl-0 = <&cam2_reset_pins_default>;
 
 			reset-gpios = <&main_gpio0 19 GPIO_ACTIVE_HIGH>;
+			orientation = <MEDIA_ORIENTATION_EXTERNAL>;
 
 			port {
 				csi2_cam2: endpoint {
@@ -207,6 +211,7 @@ imx219_3: sensor@10 {
 			pinctrl-0 = <&cam3_reset_pins_default>;
 
 			reset-gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+			orientation = <MEDIA_ORIENTATION_EXTERNAL>;
 
 			port {
 				csi2_cam3: endpoint {
-- 
2.34.1