[PATCH 00/22] usb: fix spelling mistakes in comments

[PATCH 00/22] usb: fix spelling mistakes in comments

[Shunbo Shi]

Cover-letter:

Hi Greg,

This series fixes misspelled words in code comments across 22
subdirectories of drivers/usb/, found with codespell.  All changes
are comment-only: no identifiers, strings, macros or code are
touched (verified mechanically - every modified line starts with
a comment marker).

Words that are USB domain terms, device or product names,
people's names, or common informal variants are deliberately
left untouched.

No functional changes.

 94 files changed, 156 insertions(+), 156 deletions(-)

--
2.53.0

[PATCH 01/22] usb: atm: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/atm/ueagle-atm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 61723e7ab351..d569ee93b493 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2189,7 +2189,7 @@ static void uea_stop(struct uea_softc *sc)
 	release_firmware(sc->dsp_firm);
 }
 
-/* syfs interface */
+/* sysfs interface */
 static struct uea_softc *dev_to_uea(struct device *dev)
 {
 	struct usb_interface *intf;
-- 
2.53.0

[PATCH 02/22] usb: cdns3: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/cdns3/cdns3-ep0.c    | 4 ++--
 drivers/usb/cdns3/cdns3-gadget.c | 6 +++---
 drivers/usb/cdns3/drd.c          | 2 +-
 drivers/usb/cdns3/drd.h          | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/cdns3/cdns3-ep0.c b/drivers/usb/cdns3/cdns3-ep0.c
index e29989d57bef..5d6d3616bfc6 100644
--- a/drivers/usb/cdns3/cdns3-ep0.c
+++ b/drivers/usb/cdns3/cdns3-ep0.c
@@ -643,7 +643,7 @@ void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
  * @desc: pointer to usb endpoint descriptor
  *
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active
+ * endpoint 0 is always active
  */
 static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
 				   const struct usb_endpoint_descriptor *desc)
@@ -656,7 +656,7 @@ static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
  * @ep: pointer to endpoint zero object
  *
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active
+ * endpoint 0 is always active
  */
 static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
 {
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index f4dfd0131708..ba10ef9ea656 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -452,7 +452,7 @@ static void __cdns3_descmiss_copy_data(struct usb_request *request,
 			       descmiss_req->actual);
 			request->actual = length;
 		} else {
-			/* It should never occures */
+			/* It should never occurs */
 			request->status = -ENOMEM;
 		}
 	} else {
@@ -1062,7 +1062,7 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
 
 	if (!(priv_ep->flags & EP_STALLED)) {
 		trace_cdns3_ring(priv_ep);
-		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		/*clearing TRBERR and EP_STS_DESCMIS before setting DRDY*/
 		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
 
 		priv_ep->prime_flag = false;
@@ -1404,7 +1404,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
 
 	if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALLED)) {
 		trace_cdns3_ring(priv_ep);
-		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		/*clearing TRBERR and EP_STS_DESCMIS before setting DRDY*/
 		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
 		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
 		cdns3_rearm_drdy_if_needed(priv_ep);
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
index 42f13757d904..7465a2a4fb2d 100644
--- a/drivers/usb/cdns3/drd.c
+++ b/drivers/usb/cdns3/drd.c
@@ -58,7 +58,7 @@ static int cdns_set_mode(struct cdns *cdns, enum usb_dr_mode mode)
 			/*
 			 * Enable work around feature built into the
 			 * controller to address issue with RX Sensitivity
-			 * est (EL_17) for USB2 PHY. The issue only occures
+			 * est (EL_17) for USB2 PHY. The issue only occurs
 			 * for 0x0002450D controller version.
 			 */
 			if (cdns->phyrst_a_enable) {
diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
index 1e2aee14d629..0b134c1e5a49 100644
--- a/drivers/usb/cdns3/drd.h
+++ b/drivers/usb/cdns3/drd.h
@@ -160,11 +160,11 @@ struct cdns_otg_irq_regs {
  * Value of the strap pins for:
  * CDNS3:
  * 000 - no default configuration
- * 010 - Controller initiall configured as Host
+ * 010 - Controller initially configured as Host
  * 100 - Controller initially configured as Device
  * CDNSP:
  * 000 - No default configuration.
- * 010 - Controller initiall configured as Host.
+ * 010 - Controller initially configured as Host.
  * 100 - Controller initially configured as Device.
  */
 #define OTGSTS_STRAP(p)			(((p) & GENMASK(14, 12)) >> 12)
-- 
2.53.0

[PATCH 03/22] usb: chipidea: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/chipidea/core.c | 2 +-
 drivers/usb/chipidea/udc.c  | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 3461dd763a6e..e41ced53ac0c 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -642,7 +642,7 @@ static enum ci_role ci_get_role(struct ci_hdrc *ci)
 		} else {
 			/*
 			 * If the controller is not OTG capable, but support
-			 * role switch, the defalt role is gadget, and the
+			 * role switch, the default role is gadget, and the
 			 * user can switch it through debugfs.
 			 */
 			role = CI_ROLE_GADGET;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index c29b2d0dcc7c..827428aedba0 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -208,7 +208,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
 	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
-	/* status shoult be tested according with manual but it doesn't work */
+	/* status should be tested according with manual but it doesn't work */
 	return 0;
 }
 
@@ -271,7 +271,7 @@ static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
  *                                without interruption)
  * @ci: the controller
  *
- * This function returns active interrutps
+ * This function returns active interrupts
  */
 static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
 {
@@ -1242,7 +1242,7 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 }
 
 /**
- * isr_setup_status_phase: queues the status phase of a setup transation
+ * isr_setup_status_phase: queues the status phase of a setup transaction
  * @ci: ci struct
  *
  * This function returns an error code
-- 
2.53.0

[PATCH 04/22] usb: class: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/class/cdc-wdm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 7556c0dac908..1745d9f51a1c 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -1189,7 +1189,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
  *
  * The subdriver will manage the given interrupt endpoint exclusively
  * and will issue control requests referring to the given intf. It
- * will otherwise avoid interferring, and in particular not do
+ * will otherwise avoid interfering, and in particular not do
  * usb_set_intfdata/usb_get_intfdata on intf.
  *
  * The return value is a pointer to the subdriver's struct usb_driver.
-- 
2.53.0

[PATCH 05/22] usb: common: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/common/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index fc0845f681be..450d13c6ca5f 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -285,7 +285,7 @@ EXPORT_SYMBOL_GPL(usb_decode_interval);
  *
  * In dts a usb controller associates with phy devices.  The function gets
  * the string from property 'dr_mode' of the controller associated with the
- * given phy device node, and returns the correspondig enum usb_dr_mode.
+ * given phy device node, and returns the corresponding enum usb_dr_mode.
  */
 enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
-- 
2.53.0

[PATCH 06/22] usb: core: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/core/driver.c | 2 +-
 drivers/usb/core/hub.c    | 8 ++++----
 drivers/usb/core/port.c   | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d3a61ebc6afb..fbbdcaed9bad 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(usb_match_one_id);
  * vendor-specific, and hence matching against a standard product
  * class wouldn't work anyway.  If you really want to use an
  * interface-based match for such a device, create a match record
- * that also specifies the vendor ID.  (Unforunately there isn't a
+ * that also specifies the vendor ID.  (Unfortunately there isn't a
  * standard macro for creating records like this.)
  *
  * Within those groups, remember that not all combinations are
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 199d3f535a89..9478b23e506d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -215,7 +215,7 @@ int usb_device_supports_lpm(struct usb_device *udev)
 }
 
 /*
- * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from
+ * Set the Maximum Exit Latency (MEL) for the host to wakeup up the path from
  * U1/U2, send a PING to the device and receive a PING_RESPONSE.
  * See USB 3.1 section C.1.5.2
  */
@@ -4284,7 +4284,7 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
 }
 
 /*
- * Don't allow device intiated U1/U2 if device isn't in the configured state,
+ * Don't allow device initiated U1/U2 if device isn't in the configured state,
  * or the system exit latency + one bus interval is greater than the minimum
  * service interval of any active periodic endpoint. See USB 3.2 section 9.4.9
  */
@@ -6395,10 +6395,10 @@ int usb_reset_device(struct usb_device *udev)
 	 * Don't allocate memory with GFP_KERNEL in current
 	 * context to avoid possible deadlock if usb mass
 	 * storage interface or usbnet interface(iSCSI case)
-	 * is included in current configuration. The easist
+	 * is included in current configuration. The easiest
 	 * approach is to do it for every device reset,
 	 * because the device 'memalloc_noio' flag may have
-	 * not been set before reseting the usb device.
+	 * not been set before resetting the usb device.
 	 */
 	noio_flag = memalloc_noio_save();
 
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index b4452b665f59..33710e99e595 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -812,7 +812,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 	find_and_link_peer(hub, port1);
 
 	/*
-	 * Enable runtime pm and hold a refernce that hub_configure()
+	 * Enable runtime pm and hold a reference that hub_configure()
 	 * will drop once the PM_QOS_NO_POWER_OFF flag state has been set
 	 * and the hub has been fully registered (hdev->maxchild set).
 	 */
-- 
2.53.0

[PATCH 07/22] usb: dwc2: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/dwc2/core.c      | 4 ++--
 drivers/usb/dwc2/core.h      | 2 +-
 drivers/usb/dwc2/gadget.c    | 6 +++---
 drivers/usb/dwc2/hcd.c       | 8 ++++----
 drivers/usb/dwc2/hcd.h       | 2 +-
 drivers/usb/dwc2/hcd_ddma.c  | 2 +-
 drivers/usb/dwc2/hcd_queue.c | 2 +-
 7 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 6a0135e06b00..7b98c3e1338a 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -113,7 +113,7 @@ int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
 	gr = &hsotg->gr_backup;
 
 	/*
-	 * Restore host or device regisers with the same mode core enterted
+	 * Restore host or device registers with the same mode core enterted
 	 * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup
 	 * value of the "gotgctl" register.
 	 */
@@ -138,7 +138,7 @@ int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
 }
 
 /**
- * dwc2_restore_essential_regs() - Restore essiential regs of core.
+ * dwc2_restore_essential_regs() - Restore essential regs of core.
  *
  * @hsotg: Programming view of the DWC_otg controller
  * @rmode: Restore mode, enabled in case of remote-wakeup.
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 015a5fb7842d..57f5b8180a32 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1006,7 +1006,7 @@ struct dwc2_hregs_backup {
  * @driver:             USB gadget driver
  * @dedicated_fifos:    Set if the hardware has dedicated IN-EP fifos.
  * @num_of_eps:         Number of available EPs (excluding EP0)
- * @debug_root:         Root directrory for debugfs.
+ * @debug_root:         Root directory for debugfs.
  * @ep0_reply:          Request used for ep0 reply.
  * @ep0_buff:           Buffer for EP0 reply data, if needed.
  * @ctrl_buff:          Buffer for EP0 control requests.
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 6c8a9f05fff0..1eebe14ea68b 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2835,7 +2835,7 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg,
  * @dir_in: Endpoint direction 1-in 0-out.
  *
  * Reads for endpoint with given index and direction, by masking
- * epint_reg with coresponding mask.
+ * epint_reg with corresponding mask.
  */
 static u32 dwc2_gadget_read_ep_interrupts(struct dwc2_hsotg *hsotg,
 					  unsigned int idx, int dir_in)
@@ -4073,7 +4073,7 @@ static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
 
 /**
  * dwc2_hsotg_ep_enable - enable the given endpoint
- * @ep: The USB endpint to configure
+ * @ep: The USB endpoint to configure
  * @desc: The USB endpoint descriptor to configure with.
  *
  * This is called from the USB gadget code's usb_ep_enable().
@@ -4657,7 +4657,7 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
  * dwc2_hsotg_udc_stop - stop the udc
  * @gadget: The usb gadget state
  *
- * Stop udc hw block and stay tunned for future transmissions
+ * Stop udc hw block and stay tuned for future transmissions
  */
 static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget)
 {
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index d5275cd658d4..fd2c0a8a4d30 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -34,7 +34,7 @@
  */
 
 /**
- * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
+ * dwc2_enable_common_interrupts() - Initializes the common interrupts,
  * used in both device and host modes
  *
  * @hsotg: Programming view of the DWC_otg controller
@@ -749,7 +749,7 @@ static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
  *
  * In slave mode, checks for a free request queue entry, then sets the Channel
  * Enable and Channel Disable bits of the Host Channel Characteristics
- * register of the specified channel to intiate the halt. If there is no free
+ * register of the specified channel to initiate the halt. If there is no free
  * request queue entry, sets only the Channel Disable bit of the HCCHARn
  * register to flush requests for this channel. In the latter case, sets a
  * flag to indicate that the host channel needs to be halted when a request
@@ -5882,7 +5882,7 @@ int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
 	udelay(5);
 
 	if (!rem_wakeup) {
-		/* Stop driveing resume signaling on the port. */
+		/* Stop driving resume signaling on the port. */
 		hprt0 = dwc2_read_hprt0(hsotg);
 		hprt0 &= ~HPRT0_RES;
 		dwc2_writel(hsotg, hprt0, HPRT0);
@@ -5982,7 +5982,7 @@ void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup)
 		/* In case of port resume need to wait for 40 ms */
 		msleep(USB_RESUME_TIMEOUT);
 
-		/* Stop driveing resume signaling on the port. */
+		/* Stop driving resume signaling on the port. */
 		hprt0 = dwc2_read_hprt0(hsotg);
 		hprt0 &= ~HPRT0_RES;
 		dwc2_writel(hsotg, hprt0, HPRT0);
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index b7254d94fdc3..656acd2f03bd 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -10,7 +10,7 @@
 
 /*
  * This file contains the structures, constants, and interfaces for the
- * Host Contoller Driver (HCD)
+ * Host Controller Driver (HCD)
  *
  * The Host Controller Driver (HCD) is responsible for translating requests
  * from the USB Driver into the appropriate actions on the DWC_otg controller.
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index 703cda5a5895..bdeb2943c4a5 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -415,7 +415,7 @@ static u16 dwc2_calc_starting_frame(struct dwc2_hsotg *hsotg,
 	 * Current frame is 1, scheduled frame is 3. Since HC always fetches
 	 * the descriptor corresponding to curr_frame+1, the descriptor
 	 * corresponding to frame 2 will be fetched. If the number of
-	 * descriptors is max=64 (or greather) the list will be fully programmed
+	 * descriptors is max=64 (or greater) the list will be fully programmed
 	 * with Active descriptors and it is possible case (rare) that the
 	 * latest descriptor(considering rollback) corresponding to frame 2 will
 	 * be serviced first. HS case is more probable because, in fact, up to
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 4f00ff1dc3e1..68e50b94e99f 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -1006,7 +1006,7 @@ static void dwc2_uframe_unschedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
  * dwc2_pick_first_frame() - Choose 1st frame for qh that's already scheduled
  *
  * Takes a qh that has already been scheduled (which means we know we have the
- * bandwdith reserved for us) and set the next_active_frame and the
+ * bandwidth reserved for us) and set the next_active_frame and the
  * start_active_frame.
  *
  * This is expected to be called on qh's that weren't previously actively
-- 
2.53.0

[PATCH 08/22] usb: dwc3: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/dwc3/core.h | 4 ++--
 drivers/usb/dwc3/glue.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f3dabb37f806..ba38a3fb9436 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1014,7 +1014,7 @@ struct dwc3_glue_ops {
  * @err_recovery_work: workqueue used for controller error recovery
  * @ep0_trb: trb which is used for the ctrl_req
  * @bounce: address of bounce buffer
- * @setup_buf: used while precessing STD USB requests
+ * @setup_buf: used while processing STD USB requests
  * @ep0_trb_addr: dma address of @ep0_trb
  * @bounce_addr: dma address of @bounce
  * @ep0_usb_req: dummy req used while handling STD USB requests
@@ -1161,7 +1161,7 @@ struct dwc3_glue_ops {
  *			check during HS transmit.
  * @resume_hs_terminations: Set if we enable quirk for fixing improper crc
  *			generation after resume from suspend.
- * @ulpi_ext_vbus_drv: Set to confiure the upli chip to drives CPEN pin
+ * @ulpi_ext_vbus_drv: Set to configure the upli chip to drives CPEN pin
  *			VBUS with an external supply.
  * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
  *			instances in park mode.
diff --git a/drivers/usb/dwc3/glue.h b/drivers/usb/dwc3/glue.h
index d738e1739ae0..a1284c481390 100644
--- a/drivers/usb/dwc3/glue.h
+++ b/drivers/usb/dwc3/glue.h
@@ -30,7 +30,7 @@ struct dwc3_properties {
  * @res: resource for the DWC3 core mmio region
  * @ignore_clocks_and_resets: clocks and resets defined for the device should
  *		be ignored by the DWC3 core, as they are managed by the glue
- * @skip_core_init_mode: Skip the finial initialization of the target mode, as
+ * @skip_core_init_mode: Skip the final initialization of the target mode, as
  *		it must be managed by the glue
  * @properties: dwc3 software manage properties
  */
-- 
2.53.0

[PATCH 09/22] usb: fotg210: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/fotg210/fotg210-udc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/fotg210/fotg210-udc.h b/drivers/usb/fotg210/fotg210-udc.h
index 11fe67802537..f64339fcc273 100644
--- a/drivers/usb/fotg210/fotg210-udc.h
+++ b/drivers/usb/fotg210/fotg210-udc.h
@@ -171,7 +171,7 @@
 #define FIFOMAP_EPNO(ep)	((ep) << ((ep) - 1) * 8)
 #define FIFOMAP_EPNOMSK(ep)	(0xF << ((ep) - 1) * 8)
 
-/* Device FIFO Confuguration Register (0x1AC) */
+/* Device FIFO Configuration Register (0x1AC) */
 #define FOTG210_FIFOCF		0x1AC
 #define FIFOCF_TYPE(type, fifo)	((type) << (fifo) * 8)
 #define FIFOCF_BLK_SIN(fifo)	(0x0 << (fifo) * 8 << 2)
-- 
2.53.0

[PATCH 10/22] usb: gadget: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/gadget/composite.c               |  4 ++--
 drivers/usb/gadget/epautoconf.c              |  2 +-
 drivers/usb/gadget/function/f_hid.c          |  2 +-
 drivers/usb/gadget/function/f_ncm.c          |  2 +-
 drivers/usb/gadget/function/f_printer.c      |  2 +-
 drivers/usb/gadget/function/f_uac2.c         |  4 ++--
 drivers/usb/gadget/function/ndis.h           |  2 +-
 drivers/usb/gadget/function/rndis.c          |  2 +-
 drivers/usb/gadget/function/storage_common.c |  2 +-
 drivers/usb/gadget/function/u_audio.c        |  2 +-
 drivers/usb/gadget/legacy/inode.c            |  2 +-
 drivers/usb/gadget/udc/aspeed-vhub/ep0.c     |  2 +-
 drivers/usb/gadget/udc/aspeed-vhub/hub.c     |  2 +-
 drivers/usb/gadget/udc/bdc/bdc.h             |  6 +++---
 drivers/usb/gadget/udc/bdc/bdc_cmd.c         |  2 +-
 drivers/usb/gadget/udc/bdc/bdc_core.c        |  4 ++--
 drivers/usb/gadget/udc/bdc/bdc_ep.c          | 10 +++++-----
 drivers/usb/gadget/udc/cdns2/cdns2-ep0.c     |  4 ++--
 drivers/usb/gadget/udc/cdns2/cdns2-gadget.h  |  4 ++--
 drivers/usb/gadget/udc/core.c                |  4 ++--
 drivers/usb/gadget/udc/fsl_qe_udc.h          |  2 +-
 drivers/usb/gadget/udc/fsl_udc_core.c        | 10 +++++-----
 drivers/usb/gadget/udc/gr_udc.c              |  2 +-
 drivers/usb/gadget/udc/m66592-udc.c          |  2 +-
 drivers/usb/gadget/udc/net2280.c             |  2 +-
 drivers/usb/gadget/udc/pch_udc.c             | 20 ++++++++++----------
 drivers/usb/gadget/udc/pxa27x_udc.c          | 12 ++++++------
 drivers/usb/gadget/udc/r8a66597-udc.c        |  2 +-
 drivers/usb/gadget/udc/renesas_usbf.c        |  4 ++--
 drivers/usb/gadget/udc/snps_udc_core.c       |  6 +++---
 drivers/usb/gadget/udc/snps_udc_plat.c       |  2 +-
 drivers/usb/gadget/udc/udc-xilinx.c          |  2 +-
 drivers/usb/gadget/usbstring.c               |  2 +-
 33 files changed, 66 insertions(+), 66 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 1b2238147cfe..4ec54414c927 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -25,7 +25,7 @@
 
 /**
  * struct usb_os_string - represents OS String to be reported by a gadget
- * @bLength: total length of the entire descritor, always 0x12
+ * @bLength: total length of the entire descriptor, always 0x12
  * @bDescriptorType: USB_DT_STRING
  * @qwSignature: the OS String proper
  * @bMS_VendorCode: code used by the host for subsequent requests
@@ -1556,7 +1556,7 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
 				req->status, req->actual, req->length);
 
 	/*
-	 * REVIST The same ep0 requests are shared with function drivers
+	 * REVISIT The same ep0 requests are shared with function drivers
 	 * so they don't have to maintain the same ->complete() stubs.
 	 *
 	 * Because of that, we need to check for the validity of ->context
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 30016b805bfd..8013bf6be6dd 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -29,7 +29,7 @@
  *    supports a different number of streams.
  *
  * This routine replaces the usb_ep_autoconfig when needed
- * superspeed enhancments. If such enhancemnets are required,
+ * superspeed enhancements. If such enhancemnets are required,
  * the FD should call usb_ep_autoconfig_ss directly and provide
  * the additional ep_comp parameter.
  *
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 3c6b43d06a6d..cf54704b7655 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -618,7 +618,7 @@ static void get_report_workqueue_handler(struct work_struct *work)
 			 */
 			req->buf = ptr->report_data.data;
 		} else {
-			/* If there are no prevoiusly sent reports send empty report */
+			/* If there are no previously sent reports send empty report */
 			req->buf = hidg->get_report.data;
 			memset(req->buf, 0x0, req->length);
 		}
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 500c9c19c78b..f15e1c809a7d 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -612,7 +612,7 @@ static void ncm_notify(struct f_ncm *ncm)
 	 *
 	 * If ncm_notify() is called before the second (CONNECT)
 	 * notification is sent, then it will reset to send the SPEED
-	 * notificaion again (and again, and again), but it's not a problem
+	 * notification again (and again, and again), but it's not a problem
 	 */
 	ncm->notify_state = NCM_NOTIFY_SPEED;
 	ncm_do_notify(ncm);
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 1857d786110b..3f25d99be34d 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -557,7 +557,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 
 		/* If we not returning all the data left in this RX request
 		 * buffer then adjust the amount of data left in the buffer.
-		 * Othewise if we are done with this RX request buffer then
+		 * Otherwise if we are done with this RX request buffer then
 		 * requeue it to get any incoming data from the USB host.
 		 */
 		if (size < current_rx_bytes) {
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index d8cf710085a0..f9ca07dec17e 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -206,7 +206,7 @@ static struct uac2_input_terminal_descriptor io_in_it_desc = {
 	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
 };
 
-/* Ouput Terminal for USB_IN */
+/* Output Terminal for USB_IN */
 static struct uac2_output_terminal_descriptor usb_in_ot_desc = {
 	.bLength = sizeof usb_in_ot_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
@@ -220,7 +220,7 @@ static struct uac2_output_terminal_descriptor usb_in_ot_desc = {
 	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
 };
 
-/* Ouput Terminal for I/O-Out */
+/* Output Terminal for I/O-Out */
 static struct uac2_output_terminal_descriptor io_out_ot_desc = {
 	.bLength = sizeof io_out_ot_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
diff --git a/drivers/usb/gadget/function/ndis.h b/drivers/usb/gadget/function/ndis.h
index a19f72dec0cd..16e87628d37b 100644
--- a/drivers/usb/gadget/function/ndis.h
+++ b/drivers/usb/gadget/function/ndis.h
@@ -4,7 +4,7 @@
  * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de>
  *
  * Thanks to the cygwin development team,
- * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net>
+ * especially to Casper S. Hornstrup <chorns@users.sourceforge.net>
  *
  * THIS SOFTWARE IS NOT COPYRIGHTED
  *
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
index a2fd239b7ad3..0d3f784dc945 100644
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -731,7 +731,7 @@ static int rndis_keepalive_response(struct rndis_params *params,
 
 
 /*
- * Device to Host Comunication
+ * Device to Host Communication
  */
 static int rndis_indicate_status_msg(struct rndis_params *params, u32 status)
 {
diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
index 75831f2c7abe..cc90e252925c 100644
--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -3,7 +3,7 @@
  * storage_common.c -- Common definitions for mass storage functionality
  *
  * Copyright (C) 2003-2008 Alan Stern
- * Copyeight (C) 2009 Samsung Electronics
+ * Copyright (C) 2009 Samsung Electronics
  * Author: Michal Nazarewicz (mina86@mina86.com)
  */
 
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index f0ee83abcebc..11d8a304a38e 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -129,7 +129,7 @@ static void u_audio_set_fback_frequency(enum usb_device_speed speed,
 		 * in samples/microframe.
 		 * Format is encoded in Q12.13 fitted into four bytes so that
 		 * the binary point is located between the second and the third
-		 * byte fromat (that is Q16.16)
+		 * byte format (that is Q16.16)
 		 *
 		 * ff = (freq << 16) / 8000
 		 *
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 7f6d8460152f..cc059a6ee262 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -2081,7 +2081,7 @@ static const struct file_operations ep0_operations = {
 
 
 /* FIXME PAM etc could set this security policy without mount options
- * if epfiles inherited ownership and permissons from ep0 ...
+ * if epfiles inherited ownership and permissions from ep0 ...
  */
 
 static unsigned default_uid;
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
index e9aa74231760..6b363aa6f8bd 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
@@ -365,7 +365,7 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 	struct device *dev = &vhub->pdev->dev;
 	unsigned long flags;
 
-	/* Paranoid cheks */
+	/* Paranoid checks */
 	if (!u_req || (!u_req->complete && !req->internal)) {
 		dev_warn(dev, "Bogus EP0 request ! u_req=%p\n", u_req);
 		if (u_req) {
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index d0345f31037a..5a9accd8fb53 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -551,7 +551,7 @@ void ast_vhub_device_connect(struct ast_vhub *vhub,
 					  0, true);
 
 	/*
-	 * If the hub is set to wakup the host on connection events
+	 * If the hub is set to wakeup the host on connection events
 	 * then send a wakeup.
 	 */
 	if (vhub->wakeup_en)
diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
index 2f4abf6f8f77..d967bd5bd625 100644
--- a/drivers/usb/gadget/udc/bdc/bdc.h
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -361,13 +361,13 @@ struct bdc_ep {
 	/* endpoint bd list*/
 	struct bd_list bd_list;
 	/*
-	 * HW generates extra event for multi bd tranfers, this flag helps in
+	 * HW generates extra event for multi bd transfers, this flag helps in
 	 * ignoring the extra event
 	 */
 	bool ignore_next_sr;
 };
 
-/* bdc cmmand parameter structure */
+/* bdc command parameter structure */
 struct bdc_cmd_params {
 	u32	param2;
 	u32	param1;
@@ -414,7 +414,7 @@ struct bdc {
 	/* num of endpoints for a particular instantiation of IP */
 	unsigned int num_eps;
 	/*
-	 * Array of ep's, it uses the same index covention as bdc hw i.e.
+	 * Array of ep's, it uses the same index convention as bdc hw i.e.
 	 * 1 for ep0, 2 for 1out,3 for 1in ....
 	 */
 	struct bdc_ep		**bdc_ep_array;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
index 1848ced073f8..831b0e252a2b 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_cmd.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
@@ -116,7 +116,7 @@ int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep)
 	return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0);
 }
 
-/* Reinitalize the bdlist after config ep command */
+/* Reinitialize the bdlist after config ep command */
 static void ep_bd_list_reinit(struct bdc_ep *ep)
 {
 	struct bdc *bdc = ep->bdc;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index a8dbaef54aba..cd16b6010edd 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -296,7 +296,7 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 			for (i = 1; i < bdc->num_eps; ++i)
 				bdc->bdc_ep_array[i]->flags = 0;
 	} else {
-		/* One time initiaization only */
+		/* One time initialization only */
 		/* Enable status report function pointers */
 		bdc->sr_handler[0] = bdc_sr_xsf;
 		bdc->sr_handler[1] = bdc_sr_uspc;
@@ -361,7 +361,7 @@ int bdc_reinit(struct bdc *bdc)
 	return ret;
 }
 
-/* Allocate all the dyanmic memory */
+/* Allocate all the dynamic memory */
 static int bdc_mem_alloc(struct bdc *bdc)
 {
 	u32 page_size;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index a7a22e5ec47b..039941009f1a 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -198,7 +198,7 @@ static inline int bd_needed_req(struct bdc_req *req)
 	if (req->usb_req.length == 0)
 		return 1;
 
-	/* remaining bytes after tranfering all max BD size BD's */
+	/* remaining bytes after transferring all max BD size BD's */
 	remaining = req->usb_req.length % BD_MAX_BUFF_SIZE;
 	if (remaining)
 		bd_needed++;
@@ -298,8 +298,8 @@ static int bd_available_ep(struct bdc_ep *ep)
 		return bd_list->max_bdi - bd_list->num_tabs;
 
 	/*
-	 * Depending upon where eqp and dqp pointers are, caculate number
-	 * of avaialble bd's
+	 * Depending upon where eqp and dqp pointers are, calculate number
+	 * of available bd's
 	 */
 	if (bd_list->hwd_bdi < bd_list->eqp_bdi) {
 		/* available bd's are from eqp..max_bds + 0..dqp - chain_bds */
@@ -519,7 +519,7 @@ static int bdc_queue_xfr(struct bdc *bdc, struct bdc_req *req)
 	num_bds =  bd_needed_req(req);
 	bd_available = bd_available_ep(ep);
 
-	/* how many bd's are avaialble on ep */
+	/* how many bd's are available on ep */
 	if (num_bds > bd_available)
 		return -ENOMEM;
 
@@ -1093,7 +1093,7 @@ static void ep0_stall(struct bdc *bdc)
 	bdc->delayed_status = false;
 	ep_set_halt(ep, 1);
 
-	/* de-queue any pendig requests */
+	/* de-queue any pending requests */
 	while (!list_empty(&ep->queue)) {
 		req = list_entry(ep->queue.next, struct bdc_req,
 				queue);
diff --git a/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c b/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c
index a5a9d395fd0d..802b7614ddea 100644
--- a/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c
+++ b/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c
@@ -495,7 +495,7 @@ void cdns2_handle_ep0_interrupt(struct cdns2_device *pdev, int dir)
 
 /*
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active.
+ * endpoint 0 is always active.
  */
 static int cdns2_gadget_ep0_enable(struct usb_ep *ep,
 				   const struct usb_endpoint_descriptor *desc)
@@ -505,7 +505,7 @@ static int cdns2_gadget_ep0_enable(struct usb_ep *ep,
 
 /*
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active.
+ * endpoint 0 is always active.
  */
 static int cdns2_gadget_ep0_disable(struct usb_ep *ep)
 {
diff --git a/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
index b5d5ec12e986..2ef1dea605ae 100644
--- a/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
+++ b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
@@ -540,8 +540,8 @@ struct cdns2_ring {
  * @trb_burst_size: number of burst used in TRB.
  * @skip: Sometimes the controller cannot process isochronous endpoint ring
  *        quickly enough and it will miss some isoc tds on the ring and
- *        generate ISO transmition error.
- *        Driver sets skip flag when receive a ISO transmition error and
+ *        generate ISO transmission error.
+ *        Driver sets skip flag when receive a ISO transmission error and
  *        process the missed TDs on the endpoint ring.
  * @wa1_set: use WA1.
  * @wa1_trb: TRB assigned to WA1.
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index d5844384c368..5ad5639a5ed1 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1014,7 +1014,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
 /* ------------------------------------------------------------------------- */
 
 /**
- * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ * gadget_find_ep_by_name - returns ep whose name is the same as string passed
  *	in second parameter or NULL if searched endpoint not found
  * @g: controller to check for quirk
  * @name: name of searched endpoint
@@ -1525,7 +1525,7 @@ EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
 /**
  * usb_get_gadget_udc_name - get the name of the first UDC controller
  * This functions returns the name of the first UDC controller in the system.
- * Please note that this interface is usefull only for legacy drivers which
+ * Please note that this interface is useful only for legacy drivers which
  * assume that there is only one UDC controller in the system and they need to
  * get its name before initialization. There is no guarantee that the UDC
  * of the returned name will be still available, when gadget driver registers
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
index 53ca0ff7c2cb..902b0de88eca 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.h
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
@@ -213,7 +213,7 @@ struct qe_frame{
 #define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
 #define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
 #define RX_ER_PID              0x01000000 /* Wrong PID received */
-/* Tranmit side */
+/* Transmit side */
 #define TX_ER_NAK              0x00800000 /* Received NAK handshake */
 #define TX_ER_STALL            0x00400000 /* Received STALL handshake */
 #define TX_ER_TIMEOUT          0x00200000 /* Transmit time out */
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 878d70b55530..f8fd6fd327ec 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -472,7 +472,7 @@ static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
 ********************************************************************/
 
 /*------------------------------------------------------------------
-* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
+* struct_ep_qh_setup(): set the Endpoint Capabilities field of QH
  * @zlt: Zero Length Termination Select (1: disable; 0: enable)
  * @mult: Mult field
  ------------------------------------------------------------------*/
@@ -484,7 +484,7 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
 	struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
 	unsigned int tmp = 0;
 
-	/* set the Endpoint Capabilites in QH */
+	/* set the Endpoint Capabilities in QH */
 	switch (ep_type) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		/* Interrupt On Setup (IOS). for control ep  */
@@ -594,7 +594,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	ep->stopped = 0;
 
 	/* Controller related setup */
-	/* Init EPx Queue Head (Ep Capabilites field in QH
+	/* Init EPx Queue Head (Ep Capabilities field in QH
 	 * according to max, zlt, mult) */
 	struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
 			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
@@ -1398,7 +1398,7 @@ __acquires(udc->lock)
 
 	udc_reset_ep_queue(udc, 0);
 
-	/* We process some stardard setup requests here */
+	/* We process some standard setup requests here */
 	switch (setup->bRequest) {
 	case USB_REQ_GET_STATUS:
 		/* Data+Status phase from udc */
@@ -1831,7 +1831,7 @@ static void reset_irq(struct fsl_udc *udc)
 
 	if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
 		dev_vdbg(udc->dev, "Bus reset\n");
-		/* Bus is reseting */
+		/* Bus is resetting */
 		udc->bus_reset = 1;
 		/* Reset all the queues, include XD, dTD, EP queue
 		 * head and TR Queue */
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index cdcbfae140e9..4426caa999a8 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -470,7 +470,7 @@ static int gr_add_dma_desc(struct gr_ep *ep, struct gr_request *req,
  * The first descriptor in the chain is enabled, the rest disabled. The
  * interrupt handler will later enable them one by one when needed so we can
  * find out when the transfer is finished. For OUT endpoints, all descriptors
- * therefore generate interrutps.
+ * therefore generate interrupts.
  */
 static int gr_setup_out_desc_list(struct gr_ep *ep, struct gr_request *req,
 				  gfp_t gfp_flags)
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index d77c11c4eb38..18578975b1df 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -599,7 +599,7 @@ static void init_controller(struct m66592 *m66592)
 		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
 		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
 
-		/* This is a workaound for SH7722 2nd cut */
+		/* This is a workaround for SH7722 2nd cut */
 		m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
 		m66592_bset(m66592, 0x1000, M66592_TESTMODE);
 		m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 7c5f30cfd24d..0438bfed445f 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1938,7 +1938,7 @@ static void defect7374_disable_data_eps(struct net2280 *dev)
 	/*
 	 * For Defect 7374, disable data EPs (and more):
 	 *  - This phase undoes the earlier phase of the Defect 7374 workaround,
-	 *    returing ep regs back to normal.
+	 *    returning ep regs back to normal.
 	 */
 	struct net2280_ep *ep;
 	int i;
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 99b3ce28210f..abcf3dbca29f 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -53,7 +53,7 @@
 #define UDC_EPCTL_F			(1 << 1)
 #define UDC_EPCTL_S			(1 << 0)
 #define UDC_EPCTL_ET_SHIFT		4
-/* Mask patern */
+/* Mask pattern */
 #define UDC_EPCTL_ET_MASK		0x00000030
 /* Value for ET field */
 #define UDC_EPCTL_ET_CONTROL		0
@@ -73,7 +73,7 @@
 #define UDC_EPSTS_BNA			(1 << 7)
 #define UDC_EPSTS_IN			(1 << 6)
 #define UDC_EPSTS_OUT_SHIFT		4
-/* Mask patern */
+/* Mask pattern */
 #define UDC_EPSTS_OUT_MASK		0x00000030
 #define UDC_EPSTS_ALL_CLR_MASK		0x1F0006F0
 /* Value for OUT field */
@@ -110,7 +110,7 @@
 #define UDC_DEVSTS_ALT_SHIFT		8
 #define UDC_DEVSTS_INTF_SHIFT		4
 #define UDC_DEVSTS_CFG_SHIFT		0
-/* Mask patern */
+/* Mask pattern */
 #define UDC_DEVSTS_TS_MASK		0xfffc0000
 #define UDC_DEVSTS_ENUM_SPEED_MASK	0x00006000
 #define UDC_DEVSTS_ALT_MASK		0x00000f00
@@ -132,7 +132,7 @@
 #define UDC_DEVINT_ES			(1 << 2)
 #define UDC_DEVINT_SI			(1 << 1)
 #define UDC_DEVINT_SC			(1 << 0)
-/* Mask patern */
+/* Mask pattern */
 #define UDC_DEVINT_MSK			0x7f
 
 /* Endpoint irq register */
@@ -141,7 +141,7 @@
 #define UDC_EPINT_OUT_SHIFT		16
 #define UDC_EPINT_IN_EP0		(1 << 0)
 #define UDC_EPINT_OUT_EP0		(1 << 16)
-/* Mask patern */
+/* Mask pattern */
 #define UDC_EPINT_MSK_DISABLE_ALL	0xffffffff
 
 /* UDC_CSR_BUSY Status register */
@@ -162,7 +162,7 @@
 #define UDC_CSR_NE_INTF_SHIFT		11
 #define UDC_CSR_NE_ALT_SHIFT		15
 #define UDC_CSR_NE_MAX_PKT_SHIFT	19
-/* Mask patern */
+/* Mask pattern */
 #define UDC_CSR_NE_NUM_MASK		0x0000000f
 #define UDC_CSR_NE_DIR_MASK		0x00000010
 #define UDC_CSR_NE_TYPE_MASK		0x00000060
@@ -296,7 +296,7 @@ struct pch_udc_ep {
 };
 
 /**
- * struct pch_vbus_gpio_data - Structure holding GPIO informaton
+ * struct pch_vbus_gpio_data - Structure holding GPIO information
  *					for detecting VBUS
  * @port:		gpio descriptor for the VBUS GPIO
  * @intr:		gpio interrupt number
@@ -319,7 +319,7 @@ struct pch_vbus_gpio_data {
  * @ep:			array of endpoints
  * @lock:		protects all state
  * @stall:		stall requested
- * @prot_stall:		protcol stall requested
+ * @prot_stall:		protocol stall requested
  * @suspended:		driver in suspended state
  * @connected:		gadget driver associated
  * @vbus_session:	required vbus_session state
@@ -332,7 +332,7 @@ struct pch_vbus_gpio_data {
  * @base_addr:		for mapped device memory
  * @bar:		PCI BAR used for mapped device memory
  * @cfg_data:		current cfg, intf, and alt in use
- * @vbus_gpio:		GPIO informaton for detecting VBUS
+ * @vbus_gpio:		GPIO information for detecting VBUS
  */
 struct pch_udc_dev {
 	struct usb_gadget		gadget;
@@ -846,7 +846,7 @@ static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
 }
 
 /**
- * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * pch_udc_write_ep_interrupts() - Clear endpoint interrupts
  * @dev:	Reference to structure of type pch_udc_regs
  * @val:	The value to be written to interrupt register
  */
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index df5cca43afbe..9fd079cb65c6 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -1037,7 +1037,7 @@ static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * special case of ep0 setup :
  *   (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
  *
- * Returns 0 if succedeed, error otherwise
+ * Returns 0 if succeeded, error otherwise
  */
 static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 			gfp_t gfp_flags)
@@ -1535,7 +1535,7 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active)
  * @_gadget: usb gadget
  * @is_active: 0 if should disable the udc, 1 if should enable
  *
- * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the
+ * Enables the udc, and optionally activates D+ pullup resistor. Or disables the
  * udc, and deactivates D+ pullup resistor.
  *
  * Returns 0
@@ -1943,7 +1943,7 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
  *     STAGE. The driver add STATUS STAGE to send last zero length packet in
  *     OUT_STATUS_STAGE.
  *   - special attention was needed for IN_STATUS_STAGE. If a packet complete
- *     event is detected, we terminate the status stage without ackowledging the
+ *     event is detected, we terminate the status stage without acknowledging the
  *     packet (not to risk to loose a potential SETUP packet)
  */
 static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
@@ -2023,7 +2023,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
 }
 
 /**
- * handle_ep - Handle endpoint data tranfers
+ * handle_ep - Handle endpoint data transfers
  * @ep: pxa physical endpoint
  *
  * Tries to transfer all pending request data into the endpoint and/or
@@ -2091,7 +2091,7 @@ static void handle_ep(struct pxa_ep *ep)
  * @config: usb configuration
  *
  * Post the request to upper level.
- * Don't use any pxa specific harware configuration capabilities
+ * Don't use any pxa specific hardware configuration capabilities
  */
 static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
 {
@@ -2121,7 +2121,7 @@ static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
  * @alt: alternate setting number
  *
  * Post the request to upper level.
- * Don't use any pxa specific harware configuration capabilities
+ * Don't use any pxa specific hardware configuration capabilities
  */
 static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
 {
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 915786c9628c..c7477eb4b2d4 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -652,7 +652,7 @@ static int sudmac_alloc_channel(struct r8a66597 *r8a66597,
 		change_bfre_mode(r8a66597, ep->pipenum, 1);
 	}
 
-	/* set r8a66597_ep paramters */
+	/* set r8a66597_ep parameters */
 	ep->use_dma = 1;
 	ep->dma = dma;
 	ep->fifoaddr = D0FIFO;
diff --git a/drivers/usb/gadget/udc/renesas_usbf.c b/drivers/usb/gadget/udc/renesas_usbf.c
index 367c9e73f366..cb6b365ab17c 100644
--- a/drivers/usb/gadget/udc/renesas_usbf.c
+++ b/drivers/usb/gadget/udc/renesas_usbf.c
@@ -858,7 +858,7 @@ static int usbf_epn_dma_in(struct usbf_ep *epn, struct usbf_req *req)
 		usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
 
 		/* The end of DMA transfer at the USBF level needs to be handle
-		 * after the detection of the end of DMA transfer at the brige
+		 * after the detection of the end of DMA transfer at the bridge
 		 * level.
 		 * To force this sequence, EPN_IN_END_EN will be set by the
 		 * detection of the end of transfer at bridge level (ie. bridge
@@ -1075,7 +1075,7 @@ static void usbf_epn_dma_out_send_dma(struct usbf_ep *epn, dma_addr_t addr, u32
 				USBF_EPN_SET_DMACNT(0));
 
 		/* The end of DMA transfer at the USBF level needs to be handled
-		 * after the detection of the end of DMA transfer at the brige
+		 * after the detection of the end of DMA transfer at the bridge
 		 * level.
 		 * To force this sequence, enabling the OUT_END interrupt will
 		 * be donee by the detection of the end of transfer at bridge
diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c
index d506f9d92bca..1cb29c1a0926 100644
--- a/drivers/usb/gadget/udc/snps_udc_core.c
+++ b/drivers/usb/gadget/udc/snps_udc_core.c
@@ -82,7 +82,7 @@ static int stop_timer;
  * in the FIFO (important for not blocking control traffic).
  * The value of set_rde controls the corresponding timer.
  *
- * set_rde -1 == not used, means it is alloed to be set to 0 or 1
+ * set_rde -1 == not used, means it is allowed to be set to 0 or 1
  * set_rde  0 == do not touch RDE, do no start the RDE timer
  * set_rde  1 == timer function will look whether FIFO has data
  * set_rde  2 == set by timer function to enable RX DMA on next call
@@ -1213,7 +1213,7 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
 				DBG(dev, "udc_queue(): pending bytes in "
 					"rxfifo after nyet\n");
 				/*
-				 * read pending bytes afer nyet:
+				 * read pending bytes after nyet:
 				 * referring to isr
 				 */
 				if (udc_rxfifo_read(ep, req)) {
@@ -1328,7 +1328,7 @@ udc_set_halt(struct usb_ep *usbep, int halt)
 		else {
 			/*
 			 * set STALL
-			 * rxfifo empty not taken into acount
+			 * rxfifo empty not taken into account
 			 */
 			tmp = readl(&ep->regs->ctl);
 			tmp |= AMD_BIT(UDC_EPCTL_S);
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index 8ce43c4f8fba..a2350db814c3 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -36,7 +36,7 @@ static void stop_udc(struct udc *udc)
 
 	spin_lock(&udc->lock);
 
-	/* Flush the receieve fifo */
+	/* Flush the receive fifo */
 	reg = readl(&udc->regs->ctl);
 	reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH);
 	writel(reg, &udc->regs->ctl);
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index bef06fe7543b..20fe241b4275 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -311,7 +311,7 @@ static void xudc_epconfig(struct xusb_ep *ep, struct xusb_udc *udc)
  * Return: 0 on success, error code on failure
  *
  * This function starts DMA transfer by writing to DMA source,
- * destination and lenth registers.
+ * destination and length registers.
  */
 static int xudc_start_dma(struct xusb_ep *ep, dma_addr_t src,
 			  dma_addr_t dst, u32 length)
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 37a2f1b61cba..51bf85f1e343 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -25,7 +25,7 @@
  * string descriptor in utf16-le.
  * Returns length of descriptor (always even) or negative errno
  *
- * If your driver needs stings in multiple languages, you'll probably
+ * If your driver needs strings in multiple languages, you'll probably
  * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
  * using this routine after choosing which set of UTF-8 strings to use.
  * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
-- 
2.53.0

[PATCH 11/22] usb: host: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/host/ehci-brcm.c   | 2 +-
 drivers/usb/host/ehci-sched.c  | 2 +-
 drivers/usb/host/fhci-q.c      | 2 +-
 drivers/usb/host/fhci-tds.c    | 8 ++++----
 drivers/usb/host/octeon-hcd.c  | 2 +-
 drivers/usb/host/ohci-q.c      | 2 +-
 drivers/usb/host/ohci-sa1111.c | 2 +-
 drivers/usb/host/xhci-dbgcap.h | 2 +-
 drivers/usb/host/xhci-mem.c    | 4 ++--
 drivers/usb/host/xhci-mtk.c    | 2 +-
 drivers/usb/host/xhci-mtk.h    | 2 +-
 drivers/usb/host/xhci-port.h   | 4 ++--
 drivers/usb/host/xhci-rcar.c   | 2 +-
 drivers/usb/host/xhci.h        | 2 +-
 14 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
index 5e3156f94cc6..d1f363c7d8d7 100644
--- a/drivers/usb/host/ehci-brcm.c
+++ b/drivers/usb/host/ehci-brcm.c
@@ -42,7 +42,7 @@ static inline void ehci_brcm_wait_for_sof(struct ehci_hcd *ehci, u32 delay)
  * ehci_brcm_hub_control
  * The EHCI controller has a bug where it can violate the SOF
  * interval between the first two SOF's transmitted after resume
- * if the resume occurs near the end of the microframe. This causees
+ * if the resume occurs near the end of the microframe. This causes
  * the controller to detect babble on the suspended port and
  * will eventually cause the controller to reset the port.
  * The fix is to Intercept the echi-hcd request to complete RESUME and
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 57d07d1c2dfa..ff59524f8d2b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -315,7 +315,7 @@ static int __maybe_unused same_tt(struct usb_device *dev1,
 static const unsigned char
 max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
 
-/* carryover low/fullspeed bandwidth that crosses uframe boundries */
+/* carryover low/fullspeed bandwidth that crosses uframe boundaries */
 static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
 {
 	int i;
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
index 669c240523fe..b13ad02454e1 100644
--- a/drivers/usb/host/fhci-q.c
+++ b/drivers/usb/host/fhci-q.c
@@ -208,7 +208,7 @@ void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
 }
 
 /*
- * caculate transfer length/stats and update the urb
+ * calculate transfer length/stats and update the urb
  * Precondition: irqsafe(only for urb-?status locking)
  */
 void fhci_done_td(struct urb *urb, struct td *td)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index d7482dc0604e..0ed1c0fcaaeb 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -234,9 +234,9 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
 /*
  * initialize the endpoint register according to the given parameters
  *
- * artuments:
- * usb		A pointer to the data strucutre of the USB
- * ep		A pointer to the endpoint structre
+ * arguments:
+ * usb		A pointer to the data structure of the USB
+ * ep		A pointer to the endpoint structure
  * data_mem	The data memory partition(BUS)
  */
 void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
@@ -367,7 +367,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
  * Arguments:
  * usb          A pointer to the USB structure
  * pkt          A pointer to the user frame structure
- * trans_type   Transaction tyep - IN,OUT or SETUP
+ * trans_type   Transaction type - IN,OUT or SETUP
  * dest_addr    Device address - 0~127
  * dest_ep      Endpoint number of the device - 0~16
  * trans_mode   Pipe type - ISO,Interrupt,bulk or control
diff --git a/drivers/usb/host/octeon-hcd.c b/drivers/usb/host/octeon-hcd.c
index 4929c6a8e733..cf4175246978 100644
--- a/drivers/usb/host/octeon-hcd.c
+++ b/drivers/usb/host/octeon-hcd.c
@@ -2847,7 +2847,7 @@ static int cvmx_usb_poll_channel(struct octeon_hcd *usb, int channel)
 	if (WARN_ON_ONCE(bytes_this_transfer < 0)) {
 		/*
 		 * In some rare cases the DMA engine seems to get stuck and
-		 * keeps substracting same byte count over and over again. In
+		 * keeps subtracting same byte count over and over again. In
 		 * such case we just need to fail every transaction.
 		 */
 		cvmx_usb_complete(usb, pipe, transaction,
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 3b445312beea..21916f762b49 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -137,7 +137,7 @@ static int balance (struct ohci_hcd *ohci, int interval, int load)
 /*-------------------------------------------------------------------------*/
 
 /* both iso and interrupt requests have periods; this routine puts them
- * into the schedule tree in the apppropriate place.  most iso devices use
+ * into the schedule tree in the appropriate place.  most iso devices use
  * 1msec periods, but that's not required.
  */
 static void periodic_link (struct ohci_hcd *ohci, struct ed *ed)
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index aca0338a2983..5df8108b777f 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -183,7 +183,7 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 
 	/*
 	 * We don't call dma_set_mask_and_coherent() here because the
-	 * DMA mask has already been appropraitely setup by the core
+	 * DMA mask has already been appropriately setup by the core
 	 * SA-1111 bus code (which includes bug workarounds.)
 	 */
 
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 5b18efb2c1ea..32c26b42c583 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -78,7 +78,7 @@ struct dbc_str_descs {
 
 /*
  * NULL terminated UTF-8 strings used to create UTF-16 strings
- * (with maxiumum USB_MAX_STRING_LEN 2 byte characters).
+ * (with maximum USB_MAX_STRING_LEN 2 byte characters).
  */
 struct dbc_str {
 	char	manufacturer[USB_MAX_STRING_LEN+1];
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index af8d4b74c4ba..124eb6dc5774 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1442,7 +1442,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 
 	/*
 	 * Get values to fill the endpoint context, mostly from ep descriptor.
-	 * The average TRB buffer lengt for bulk endpoints is unclear as we
+	 * The average TRB buffer length for bulk endpoints is unclear as we
 	 * have no clue on scatter gather list entry size. For Isoc and Int,
 	 * set it to max available. See xHCI 1.1 spec 4.14.1.1 for details.
 	 */
@@ -2105,7 +2105,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 			port_cap->psi[i] = readl(addr + 4 + i);
 
 			/* count unique ID values, two consecutive entries can
-			 * have the same ID if link is assymetric
+			 * have the same ID if link is asymmetric
 			 */
 			if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) !=
 				  XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1])))
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 60af5fe29bd4..6e7611f89596 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -173,7 +173,7 @@ static void xhci_mtk_set_frame_interval(struct xhci_hcd_mtk *mtk)
 
 /*
  * workaround: usb3.2 gen1 isoc rx hw issue
- * host send out unexpected ACK afer device fininsh a burst transfer with
+ * host send out unexpected ACK after device fininsh a burst transfer with
  * a short packet.
  */
 static void xhci_mtk_rxfifo_depth_set(struct xhci_hcd_mtk *mtk)
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 2274f5995171..0e29da1cea5e 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -79,7 +79,7 @@ struct mu3h_sch_bw_info {
  * @maxpkt: max packet size of endpoint
  * @ep: address of usb_host_endpoint struct
  * @speed: usb device speed
- * @allocated: the bandwidth is aready allocated from bus_bw
+ * @allocated: the bandwidth is already allocated from bus_bw
  * @offset: which uframe of the interval that transfer should be
  *		scheduled first time within the interval
  * @repeat: the time gap between two uframes that transfers are
diff --git a/drivers/usb/host/xhci-port.h b/drivers/usb/host/xhci-port.h
index 889b5fb0fcd8..96b737070421 100644
--- a/drivers/usb/host/xhci-port.h
+++ b/drivers/usb/host/xhci-port.h
@@ -102,7 +102,7 @@
 
 
 /* Cold Attach Status - xHC can set this bit to report device attached during
- * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * Sx state. Warm port reset should be performed to clear this bit and move port
  * to connected state.
  */
 #define PORT_CAS	(1 << 24)
@@ -174,7 +174,7 @@
 
 /*
  * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
- * to complete link training. usually link trainig completes much faster
+ * to complete link training. usually link training completes much faster
  * so check status 10 times with 36ms sleep in places we need to wait for
  * polling to complete.
  */
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index d747c0905827..949846532c74 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -205,7 +205,7 @@ static int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
  *
  * And, since the firmware/internal CPU control the USBSTS.STS_HALT
  * and the process speed is down when the roothub port enters U3,
- * long delay for the handshake of STS_HALT is neeed in xhci_suspend()
+ * long delay for the handshake of STS_HALT is need in xhci_suspend()
  * by using the XHCI_SLOW_SUSPEND quirk.
  */
 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ec4bfeb4887c..86a615c6fd2b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -461,7 +461,7 @@ struct xhci_ep_ctx {
 #define EP_STATE_ERROR		4
 #define GET_EP_CTX_STATE(ctx)	(le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
 
-/* Mult - Max number of burtst within an interval, in EP companion desc. */
+/* Mult - Max number of burst within an interval, in EP companion desc. */
 #define EP_MULT(p)		(((p) & 0x3) << 8)
 #define CTX_TO_EP_MULT(p)	(((p) >> 8) & 0x3)
 /* bits 10:14 are Max Primary Streams */
-- 
2.53.0

[PATCH 12/22] usb: image: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/image/mdc800.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index f7caa1c5cbb7..72cab4bfe01b 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -59,7 +59,7 @@
  * has been removed.
  *
  * version 0.6.0
- * Rewrite of this driver: The Emulation of the rs232 protocoll
+ * Rewrite of this driver: The Emulation of the rs232 protocol
  * has been removed from the driver. A special executeCommand function
  * for this driver is included to gphoto.
  * The driver supports two kind of communication to bulk endpoints.
-- 
2.53.0

[PATCH 13/22] usb: isp1760: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/isp1760/isp1760-if.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c
index a64190addba6..e09d509b4de0 100644
--- a/drivers/usb/isp1760/isp1760-if.c
+++ b/drivers/usb/isp1760/isp1760-if.c
@@ -94,7 +94,7 @@ static int isp1761_pci_init(struct pci_dev *dev)
 		return -ENOMEM;
 	}
 
-	/* Grab the PLX PCI mem maped port start address we need  */
+	/* Grab the PLX PCI mem mapped port start address we need  */
 	mem_start = pci_resource_start(dev, 0);
 	mem_length = pci_resource_len(dev, 0);
 
-- 
2.53.0

[PATCH 14/22] usb: misc: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/misc/emi26.c | 2 +-
 drivers/usb/misc/emi62.c | 2 +-
 drivers/usb/misc/ldusb.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 24d841850e05..a0fd80082043 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -198,7 +198,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 		goto wraperr;
 	msleep(250);	/* let device settle */
 
-	/* return 1 to fail the driver inialization
+	/* return 1 to fail the driver initialization
 	 * and give real driver change to load */
 	err = 1;
 
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 3eea60437f56..d29b5312f627 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -211,7 +211,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 
 	kfree(buf);
 
-	/* return 1 to fail the driver inialization
+	/* return 1 to fail the driver initialization
 	 * and give real driver change to load */
 	return 1;
 
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 71132a15e771..1072abab9659 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -2,7 +2,7 @@
 /*
  * Generic USB driver for report based interrupt in/out devices
  * like LD Didactic's USB devices. LD Didactic's USB devices are
- * HID devices which do not use HID report definitons (they use
+ * HID devices which do not use HID report definitions (they use
  * raw interrupt in and our reports only for communication).
  *
  * This driver uses a ring buffer for time critical reading of
-- 
2.53.0

[PATCH 15/22] usb: musb: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/musb/musb_host.c | 2 +-
 drivers/usb/musb/tusb6010.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 31b061248991..b8a502d2b08b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -65,7 +65,7 @@
  * (Yes, bulk _could_ use more of the endpoints than that, and would even
  * benefit from it.)
  *
- * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * INTERRUPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
  * So far that scheduling is both dumb and optimistic:  the endpoint will be
  * "claimed" until its software queue is no longer refilled.  No multiplexing
  * of transfers between endpoints, or anything clever.
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 1d9571f24a56..6a86bebc24ca 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -941,7 +941,7 @@ static void tusb_musb_enable(struct musb *musb)
 	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
 	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
 
-	/* Clear all subsystem interrups */
+	/* Clear all subsystem interrupts */
 	musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
 	musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
 	musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
-- 
2.53.0

[PATCH 16/22] usb: phy: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/phy/phy-fsl-usb.c | 2 +-
 drivers/usb/phy/phy.c         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 1986f7e9d9be..96f206351c3f 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -166,7 +166,7 @@ static void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 }
 
 /*
- * Pull-up D+, signalling connect by periperal. Also used in
+ * Pull-up D+, signalling connect by peripheral. Also used in
  * data-line pulsing in SRP
  */
 static void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 5a9b9353f343..4cabb2cfbdf9 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -202,7 +202,7 @@ static void __usb_phy_get_charger_type(struct usb_phy *usb_phy)
  * @state: the cable state
  * @data: private data
  *
- * Determin the charger type from extcon subsystem which also means the
+ * Determine the charger type from extcon subsystem which also means the
  * charger state has been chaned, then we should notify this event.
  */
 static int usb_phy_get_charger_type(struct notifier_block *nb,
-- 
2.53.0

[PATCH 17/22] usb: renesas_usbhs: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/renesas_usbhs/mod_gadget.c | 2 +-
 drivers/usb/renesas_usbhs/mod_host.c   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 0c7fe109d5c7..92f4f35f8bb1 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -852,7 +852,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
 	usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
 
 	/*
-	 * system config enble
+	 * system config enable
 	 * - HI speed
 	 * - function
 	 * - usb module
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index f7ef3a9f82a4..1a35f54203c0 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1319,7 +1319,7 @@ static int usbhsh_irq_attch(struct usbhs_priv *priv,
 	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
 
 	/*
-	 * attch interrupt might happen infinitely on some device
+	 * attach interrupt might happen infinitely on some device
 	 * (on self power USB hub ?)
 	 * disable it here.
 	 *
@@ -1347,7 +1347,7 @@ static int usbhsh_irq_dtch(struct usbhs_priv *priv,
 	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
 
 	/*
-	 * enable attch interrupt again
+	 * enable attach interrupt again
 	 *
 	 * usbhsh_is_running() becomes invalid
 	 * according to this process.
@@ -1468,7 +1468,7 @@ static int usbhsh_start(struct usbhs_priv *priv)
 	usbhsh_pipe_init_for_host(priv);
 
 	/*
-	 * system config enble
+	 * system config enable
 	 * - HI speed
 	 * - host
 	 * - usb module
-- 
2.53.0

[PATCH 18/22] usb: roles: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/roles/class.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index edec139b68b5..8ea703e63ffb 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -414,7 +414,7 @@ usb_role_switch_register(struct device *parent,
 EXPORT_SYMBOL_GPL(usb_role_switch_register);
 
 /**
- * usb_role_switch_unregister - Unregsiter USB Role Switch
+ * usb_role_switch_unregister - Unregister USB Role Switch
  * @sw: USB Role Switch
  *
  * Unregister switch that was registered with usb_role_switch_register().
-- 
2.53.0

[PATCH 19/22] usb: serial: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/serial/cypress_m8.c | 2 +-
 drivers/usb/serial/f81534.c     | 8 ++++----
 drivers/usb/serial/ftdi_sio.h   | 2 +-
 drivers/usb/serial/mos7720.c    | 2 +-
 drivers/usb/serial/oti6858.c    | 2 +-
 5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 78fb1389b34c..bd9b68b691de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -462,7 +462,7 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 	}
 
-	/* Skip reset for FRWD device. It is a workaound:
+	/* Skip reset for FRWD device. It is a workaround:
 	   device hangs if it receives SET_CONFIGURE in Configured
 	   state. */
 	if (!is_frwd(serial->dev))
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 0037767e4bbf..502c1c0260ec 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -83,7 +83,7 @@
 #define F81534_TOKEN_MSR_CHANGE		0x04
 
 /*
- * We used interal SPI bus to access FLASH section. We must wait the SPI bus to
+ * We used internal SPI bus to access FLASH section. We must wait the SPI bus to
  * idle if we performed any command.
  *
  * SPI Bus status register: F81534_BUS_REG_STATUS
@@ -755,7 +755,7 @@ static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
  * The F81532/534 will not report serial port to USB serial subsystem when
  * H/W DCD/DSR/CTS/RI/RX pin connected to ground.
  *
- * To detect RX pin status, we'll enable MCR interal loopback, disable it and
+ * To detect RX pin status, we'll enable MCR internal loopback, disable it and
  * delayed for 60ms. It connected to ground If LSR register report UART_LSR_BI.
  */
 static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
@@ -824,9 +824,9 @@ static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
  * f81534_calc_num_ports() will run to final we marked as "oldest version"
  * for this IC.
  *
- * 2rd is designed to more generic to use any transceiver and this is our
+ * 2nd is designed to more generic to use any transceiver and this is our
  * mass production type. We'll save data in F81534_CUSTOM_ADDRESS_START
- * (0x2f00) with 9bytes. The 1st byte is a indicater. If the token is
+ * (0x2f00) with 9bytes. The 1st byte is a indicator. If the token is
  * F81534_CUSTOM_VALID_TOKEN(0xf0), the IC is 2nd gen type, the following
  * 4bytes save port mode (0:RS232/1:RS485 Invert/2:RS485), and the last
  * 4bytes save GPIO state(value from 0~7 to represent 3 GPIO output pin).
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 55ea61264f91..b053e038bda4 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -15,7 +15,7 @@
  * USB on the other.
  *
  * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
- * of the protocol required to talk to the device and ongoing assistence
+ * of the protocol required to talk to the device and ongoing assistance
  * during development.
  *
  * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 104f43a8f4d8..312fa11cea95 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1208,7 +1208,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	/***********************************************
 	 *              Set for higher rates           *
 	 ***********************************************/
-	/* writing baud rate verbatum into uart clock field clearly not right */
+	/* writing baud rate verbatim into uart clock field clearly not right */
 	if (port_number == 0)
 		sp_reg = MOS7720_SP1_REG;
 	else
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index c6364e8ff71f..0e527fe56da0 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -13,7 +13,7 @@
  * Warning! You use this driver on your own risk! The only official
  * description of this device I have is datasheet from manufacturer,
  * and it doesn't contain almost any information needed to write a driver.
- * Almost all knowlegde used while writing this driver was gathered by:
+ * Almost all knowledge used while writing this driver was gathered by:
  *  - analyzing traffic between device and the M$ Windows 2000 driver,
  *  - trying different bit combinations and checking pin states
  *    with a voltmeter,
-- 
2.53.0

[PATCH 20/22] usb: storage: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/storage/ene_ub6250.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index a9358e04ab4b..18d85ee79db8 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -470,7 +470,7 @@ struct ene_ub6250_info {
 	u32		bl_num;
 	int		SrbStatus;
 
-	/*------Power Managerment ---------------*/
+	/*------Power Management ---------------*/
 	bool		Power_IsResum;
 };
 
-- 
2.53.0

[PATCH 21/22] usb: typec: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/typec/class.c            | 2 +-
 drivers/usb/typec/tcpm/tcpm.c        | 6 +++---
 drivers/usb/typec/tipd/core.c        | 2 +-
 drivers/usb/typec/ucsi/displayport.c | 2 +-
 drivers/usb/typec/ucsi/psy.c         | 2 +-
 drivers/usb/typec/ucsi/ucsi.h        | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index 54c7810b563b..ea2564b9eff6 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -564,7 +564,7 @@ static const struct attribute_group *typec_altmode_groups[] = {
  * @adev: Handle to the alternate mode
  * @ops: Ops for the alternate mode
  *
- * After setting ops, attribute visiblity needs to be refreshed if the alternate
+ * After setting ops, attribute visibility needs to be refreshed if the alternate
  * mode can be activated.
  */
 void typec_altmode_set_ops(struct typec_altmode *adev,
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index d721baef5210..dabb91319e8a 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2520,7 +2520,7 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
 			/*
 			 * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host)
 			 * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or
-			 * "wrong configuation" or "Unrecognized"
+			 * "wrong configuration" or "Unrecognized"
 			 */
 			if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) &&
 			    port->nr_snk_vdo) {
@@ -4461,7 +4461,7 @@ static int tcpm_pd_select_pdo(struct tcpm_port *port, int *sink_pdo,
 
 	/*
 	 * Select the source PDO providing the most power which has a
-	 * matchig sink cap.
+	 * matching sink cap.
 	 */
 	for (i = 0; i < port->nr_source_caps; i++) {
 		u32 pdo = port->source_caps[i];
@@ -5960,7 +5960,7 @@ static void run_state_machine(struct tcpm_port *port)
 			}
 			/*
 			 * Although tAvsSrcTransSmall is expected to be used
-			 * for voltage transistions smaller than 1V, using
+			 * for voltage transitions smaller than 1V, using
 			 * tAvsSrcTransLarge to be resilient against chargers
 			 * which strictly cannot honor tAvsSrcTransSmall to
 			 * improve interoperability.
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 02539378ffed..67471c363a68 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -950,7 +950,7 @@ static irqreturn_t cd321x_interrupt(int irq, void *data)
 		if (!tps->data->read_data_status(tps))
 			goto err_unlock;
 
-	/* Can be called uncondtionally since it will check for any changes itself */
+	/* Can be called unconditionally since it will check for any changes itself */
 	cd321x_connect(tps, status);
 
 err_unlock:
diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c
index 572da7bbd29c..56cf7deb2312 100644
--- a/drivers/usb/typec/ucsi/displayport.c
+++ b/drivers/usb/typec/ucsi/displayport.c
@@ -165,7 +165,7 @@ static int ucsi_displayport_status_update(struct ucsi_dp *dp)
 	dp->data.status = DP_STATUS_ENABLED;
 
 	/*
-	 * If pin assignement D is supported, claiming always
+	 * If pin assignment D is supported, claiming always
 	 * that Multi-function is preferred.
 	 */
 	if (DP_CAP_CAPABILITY(cap) & DP_CAP_UFP_D) {
diff --git a/drivers/usb/typec/ucsi/psy.c b/drivers/usb/typec/ucsi/psy.c
index c8ebab8ba7e7..8eb1ed42fbbd 100644
--- a/drivers/usb/typec/ucsi/psy.c
+++ b/drivers/usb/typec/ucsi/psy.c
@@ -255,7 +255,7 @@ static int ucsi_psy_get_charge_type(struct ucsi_connector *con, union power_supp
 		return 0;
 	}
 
-	/* The Battery Charging Cabability Status field is only valid in sink role. */
+	/* The Battery Charging Capability Status field is only valid in sink role. */
 	if (UCSI_CONSTAT(con, PWR_DIR) != TYPEC_SINK) {
 		val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
 		return 0;
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 1996f04ed5e6..d363e9a64763 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -509,7 +509,7 @@ struct ucsi {
 #define UCSI_NO_PARTNER_PDOS	BIT(0)	/* Don't read partner's PDOs */
 #define UCSI_DELAY_DEVICE_PDOS	BIT(1)	/* Reading PDOs fails until the parter is in PD mode */
 
-/* USB4 connection can imply that USB communcation is supported */
+/* USB4 connection can imply that USB communication is supported */
 #define UCSI_USB4_IMPLIES_USB	BIT(2)
 };
 
-- 
2.53.0

[PATCH 22/22] usb: usbip: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/serial/ftdi_sio.h | 2 +-
 drivers/usb/usbip/stub.h      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index b053e038bda4..55ea61264f91 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -15,7 +15,7 @@
  * USB on the other.
  *
  * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details
- * of the protocol required to talk to the device and ongoing assistance
+ * of the protocol required to talk to the device and ongoing assistence
  * during development.
  *
  * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the
diff --git a/drivers/usb/usbip/stub.h b/drivers/usb/usbip/stub.h
index d11270560c24..1fea0190de7f 100644
--- a/drivers/usb/usbip/stub.h
+++ b/drivers/usb/usbip/stub.h
@@ -29,7 +29,7 @@ struct stub_device {
 	 * It is allocated as stub_priv_cache and assigned to urb->context.
 	 *
 	 * stub_priv is always linked to any one of 3 lists;
-	 *	priv_init: linked to this until the comletion of a urb.
+	 *	priv_init: linked to this until the completion of a urb.
 	 *	priv_tx  : linked to this after the completion of a urb.
 	 *	priv_free: linked to this after the sending of the result.
 	 *
-- 
2.53.0

[PATCH v2 00/22] usb: fix spelling mistakes in comments

[Shunbo Shi]

Cover-letter:

Hi Greg,

v2 of this series fixes an issue in v1 spotted by the Sashiko AI
review: due to a rebase slip, the "usb: usbip" patch (22/22)
carried an unrelated hunk for drivers/usb/serial/ftdi_sio.h that
reverted a spelling fix made in the "usb: serial" patch (19/22).
v2 drops the ftdi_sio.h changes entirely from both patches (the
file is left untouched, as the word in question was deliberately
not fixed); all other patches are identical to v1.

This series fixes misspelled words in code comments across 22
subdirectories of drivers/usb/, found with codespell.  All changes
are comment-only: no identifiers, strings, macros or code are
touched (verified mechanically - every modified line starts with
a comment marker).

No functional changes.

 93 files changed, 154 insertions(+), 154 deletions(-)

--
2.53.0

[PATCH v2 01/22] usb: atm: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/atm/ueagle-atm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 61723e7ab351..d569ee93b493 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2189,7 +2189,7 @@ static void uea_stop(struct uea_softc *sc)
 	release_firmware(sc->dsp_firm);
 }
 
-/* syfs interface */
+/* sysfs interface */
 static struct uea_softc *dev_to_uea(struct device *dev)
 {
 	struct usb_interface *intf;
-- 
2.53.0

[PATCH v2 02/22] usb: cdns3: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/cdns3/cdns3-ep0.c    | 4 ++--
 drivers/usb/cdns3/cdns3-gadget.c | 6 +++---
 drivers/usb/cdns3/drd.c          | 2 +-
 drivers/usb/cdns3/drd.h          | 4 ++--
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/cdns3/cdns3-ep0.c b/drivers/usb/cdns3/cdns3-ep0.c
index e29989d57bef..5d6d3616bfc6 100644
--- a/drivers/usb/cdns3/cdns3-ep0.c
+++ b/drivers/usb/cdns3/cdns3-ep0.c
@@ -643,7 +643,7 @@ void cdns3_check_ep0_interrupt_proceed(struct cdns3_device *priv_dev, int dir)
  * @desc: pointer to usb endpoint descriptor
  *
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active
+ * endpoint 0 is always active
  */
 static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
 				   const struct usb_endpoint_descriptor *desc)
@@ -656,7 +656,7 @@ static int cdns3_gadget_ep0_enable(struct usb_ep *ep,
  * @ep: pointer to endpoint zero object
  *
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active
+ * endpoint 0 is always active
  */
 static int cdns3_gadget_ep0_disable(struct usb_ep *ep)
 {
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c
index f4dfd0131708..ba10ef9ea656 100644
--- a/drivers/usb/cdns3/cdns3-gadget.c
+++ b/drivers/usb/cdns3/cdns3-gadget.c
@@ -452,7 +452,7 @@ static void __cdns3_descmiss_copy_data(struct usb_request *request,
 			       descmiss_req->actual);
 			request->actual = length;
 		} else {
-			/* It should never occures */
+			/* It should never occurs */
 			request->status = -ENOMEM;
 		}
 	} else {
@@ -1062,7 +1062,7 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
 
 	if (!(priv_ep->flags & EP_STALLED)) {
 		trace_cdns3_ring(priv_ep);
-		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		/*clearing TRBERR and EP_STS_DESCMIS before setting DRDY*/
 		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
 
 		priv_ep->prime_flag = false;
@@ -1404,7 +1404,7 @@ static int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
 
 	if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALLED)) {
 		trace_cdns3_ring(priv_ep);
-		/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
+		/*clearing TRBERR and EP_STS_DESCMIS before setting DRDY*/
 		writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
 		writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
 		cdns3_rearm_drdy_if_needed(priv_ep);
diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c
index 42f13757d904..7465a2a4fb2d 100644
--- a/drivers/usb/cdns3/drd.c
+++ b/drivers/usb/cdns3/drd.c
@@ -58,7 +58,7 @@ static int cdns_set_mode(struct cdns *cdns, enum usb_dr_mode mode)
 			/*
 			 * Enable work around feature built into the
 			 * controller to address issue with RX Sensitivity
-			 * est (EL_17) for USB2 PHY. The issue only occures
+			 * est (EL_17) for USB2 PHY. The issue only occurs
 			 * for 0x0002450D controller version.
 			 */
 			if (cdns->phyrst_a_enable) {
diff --git a/drivers/usb/cdns3/drd.h b/drivers/usb/cdns3/drd.h
index 1e2aee14d629..0b134c1e5a49 100644
--- a/drivers/usb/cdns3/drd.h
+++ b/drivers/usb/cdns3/drd.h
@@ -160,11 +160,11 @@ struct cdns_otg_irq_regs {
  * Value of the strap pins for:
  * CDNS3:
  * 000 - no default configuration
- * 010 - Controller initiall configured as Host
+ * 010 - Controller initially configured as Host
  * 100 - Controller initially configured as Device
  * CDNSP:
  * 000 - No default configuration.
- * 010 - Controller initiall configured as Host.
+ * 010 - Controller initially configured as Host.
  * 100 - Controller initially configured as Device.
  */
 #define OTGSTS_STRAP(p)			(((p) & GENMASK(14, 12)) >> 12)
-- 
2.53.0

[PATCH v2 03/22] usb: chipidea: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/chipidea/core.c | 2 +-
 drivers/usb/chipidea/udc.c  | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 3461dd763a6e..e41ced53ac0c 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -642,7 +642,7 @@ static enum ci_role ci_get_role(struct ci_hdrc *ci)
 		} else {
 			/*
 			 * If the controller is not OTG capable, but support
-			 * role switch, the defalt role is gadget, and the
+			 * role switch, the default role is gadget, and the
 			 * user can switch it through debugfs.
 			 */
 			role = CI_ROLE_GADGET;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index c29b2d0dcc7c..827428aedba0 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -208,7 +208,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
 	if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 		return -EAGAIN;
 
-	/* status shoult be tested according with manual but it doesn't work */
+	/* status should be tested according with manual but it doesn't work */
 	return 0;
 }
 
@@ -271,7 +271,7 @@ static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
  *                                without interruption)
  * @ci: the controller
  *
- * This function returns active interrutps
+ * This function returns active interrupts
  */
 static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
 {
@@ -1242,7 +1242,7 @@ isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 }
 
 /**
- * isr_setup_status_phase: queues the status phase of a setup transation
+ * isr_setup_status_phase: queues the status phase of a setup transaction
  * @ci: ci struct
  *
  * This function returns an error code
-- 
2.53.0

[PATCH v2 04/22] usb: class: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/class/cdc-wdm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 7556c0dac908..1745d9f51a1c 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -1189,7 +1189,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
  *
  * The subdriver will manage the given interrupt endpoint exclusively
  * and will issue control requests referring to the given intf. It
- * will otherwise avoid interferring, and in particular not do
+ * will otherwise avoid interfering, and in particular not do
  * usb_set_intfdata/usb_get_intfdata on intf.
  *
  * The return value is a pointer to the subdriver's struct usb_driver.
-- 
2.53.0

[PATCH v2 05/22] usb: common: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/common/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index fc0845f681be..450d13c6ca5f 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -285,7 +285,7 @@ EXPORT_SYMBOL_GPL(usb_decode_interval);
  *
  * In dts a usb controller associates with phy devices.  The function gets
  * the string from property 'dr_mode' of the controller associated with the
- * given phy device node, and returns the correspondig enum usb_dr_mode.
+ * given phy device node, and returns the corresponding enum usb_dr_mode.
  */
 enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
-- 
2.53.0

[PATCH v2 06/22] usb: core: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/core/driver.c | 2 +-
 drivers/usb/core/hub.c    | 8 ++++----
 drivers/usb/core/port.c   | 2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d3a61ebc6afb..fbbdcaed9bad 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(usb_match_one_id);
  * vendor-specific, and hence matching against a standard product
  * class wouldn't work anyway.  If you really want to use an
  * interface-based match for such a device, create a match record
- * that also specifies the vendor ID.  (Unforunately there isn't a
+ * that also specifies the vendor ID.  (Unfortunately there isn't a
  * standard macro for creating records like this.)
  *
  * Within those groups, remember that not all combinations are
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 199d3f535a89..9478b23e506d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -215,7 +215,7 @@ int usb_device_supports_lpm(struct usb_device *udev)
 }
 
 /*
- * Set the Maximum Exit Latency (MEL) for the host to wakup up the path from
+ * Set the Maximum Exit Latency (MEL) for the host to wakeup up the path from
  * U1/U2, send a PING to the device and receive a PING_RESPONSE.
  * See USB 3.1 section C.1.5.2
  */
@@ -4284,7 +4284,7 @@ static int usb_set_lpm_timeout(struct usb_device *udev,
 }
 
 /*
- * Don't allow device intiated U1/U2 if device isn't in the configured state,
+ * Don't allow device initiated U1/U2 if device isn't in the configured state,
  * or the system exit latency + one bus interval is greater than the minimum
  * service interval of any active periodic endpoint. See USB 3.2 section 9.4.9
  */
@@ -6395,10 +6395,10 @@ int usb_reset_device(struct usb_device *udev)
 	 * Don't allocate memory with GFP_KERNEL in current
 	 * context to avoid possible deadlock if usb mass
 	 * storage interface or usbnet interface(iSCSI case)
-	 * is included in current configuration. The easist
+	 * is included in current configuration. The easiest
 	 * approach is to do it for every device reset,
 	 * because the device 'memalloc_noio' flag may have
-	 * not been set before reseting the usb device.
+	 * not been set before resetting the usb device.
 	 */
 	noio_flag = memalloc_noio_save();
 
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index b4452b665f59..33710e99e595 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -812,7 +812,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
 	find_and_link_peer(hub, port1);
 
 	/*
-	 * Enable runtime pm and hold a refernce that hub_configure()
+	 * Enable runtime pm and hold a reference that hub_configure()
 	 * will drop once the PM_QOS_NO_POWER_OFF flag state has been set
 	 * and the hub has been fully registered (hdev->maxchild set).
 	 */
-- 
2.53.0

[PATCH v2 07/22] usb: dwc2: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/dwc2/core.c      | 4 ++--
 drivers/usb/dwc2/core.h      | 2 +-
 drivers/usb/dwc2/gadget.c    | 6 +++---
 drivers/usb/dwc2/hcd.c       | 8 ++++----
 drivers/usb/dwc2/hcd.h       | 2 +-
 drivers/usb/dwc2/hcd_ddma.c  | 2 +-
 drivers/usb/dwc2/hcd_queue.c | 2 +-
 7 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 6a0135e06b00..7b98c3e1338a 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -113,7 +113,7 @@ int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
 	gr = &hsotg->gr_backup;
 
 	/*
-	 * Restore host or device regisers with the same mode core enterted
+	 * Restore host or device registers with the same mode core enterted
 	 * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup
 	 * value of the "gotgctl" register.
 	 */
@@ -138,7 +138,7 @@ int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
 }
 
 /**
- * dwc2_restore_essential_regs() - Restore essiential regs of core.
+ * dwc2_restore_essential_regs() - Restore essential regs of core.
  *
  * @hsotg: Programming view of the DWC_otg controller
  * @rmode: Restore mode, enabled in case of remote-wakeup.
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 015a5fb7842d..57f5b8180a32 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1006,7 +1006,7 @@ struct dwc2_hregs_backup {
  * @driver:             USB gadget driver
  * @dedicated_fifos:    Set if the hardware has dedicated IN-EP fifos.
  * @num_of_eps:         Number of available EPs (excluding EP0)
- * @debug_root:         Root directrory for debugfs.
+ * @debug_root:         Root directory for debugfs.
  * @ep0_reply:          Request used for ep0 reply.
  * @ep0_buff:           Buffer for EP0 reply data, if needed.
  * @ctrl_buff:          Buffer for EP0 control requests.
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 6c8a9f05fff0..1eebe14ea68b 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2835,7 +2835,7 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg,
  * @dir_in: Endpoint direction 1-in 0-out.
  *
  * Reads for endpoint with given index and direction, by masking
- * epint_reg with coresponding mask.
+ * epint_reg with corresponding mask.
  */
 static u32 dwc2_gadget_read_ep_interrupts(struct dwc2_hsotg *hsotg,
 					  unsigned int idx, int dir_in)
@@ -4073,7 +4073,7 @@ static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
 
 /**
  * dwc2_hsotg_ep_enable - enable the given endpoint
- * @ep: The USB endpint to configure
+ * @ep: The USB endpoint to configure
  * @desc: The USB endpoint descriptor to configure with.
  *
  * This is called from the USB gadget code's usb_ep_enable().
@@ -4657,7 +4657,7 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
  * dwc2_hsotg_udc_stop - stop the udc
  * @gadget: The usb gadget state
  *
- * Stop udc hw block and stay tunned for future transmissions
+ * Stop udc hw block and stay tuned for future transmissions
  */
 static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget)
 {
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index d5275cd658d4..fd2c0a8a4d30 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -34,7 +34,7 @@
  */
 
 /**
- * dwc2_enable_common_interrupts() - Initializes the commmon interrupts,
+ * dwc2_enable_common_interrupts() - Initializes the common interrupts,
  * used in both device and host modes
  *
  * @hsotg: Programming view of the DWC_otg controller
@@ -749,7 +749,7 @@ static void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan)
  *
  * In slave mode, checks for a free request queue entry, then sets the Channel
  * Enable and Channel Disable bits of the Host Channel Characteristics
- * register of the specified channel to intiate the halt. If there is no free
+ * register of the specified channel to initiate the halt. If there is no free
  * request queue entry, sets only the Channel Disable bit of the HCCHARn
  * register to flush requests for this channel. In the latter case, sets a
  * flag to indicate that the host channel needs to be halted when a request
@@ -5882,7 +5882,7 @@ int dwc2_host_exit_partial_power_down(struct dwc2_hsotg *hsotg,
 	udelay(5);
 
 	if (!rem_wakeup) {
-		/* Stop driveing resume signaling on the port. */
+		/* Stop driving resume signaling on the port. */
 		hprt0 = dwc2_read_hprt0(hsotg);
 		hprt0 &= ~HPRT0_RES;
 		dwc2_writel(hsotg, hprt0, HPRT0);
@@ -5982,7 +5982,7 @@ void dwc2_host_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup)
 		/* In case of port resume need to wait for 40 ms */
 		msleep(USB_RESUME_TIMEOUT);
 
-		/* Stop driveing resume signaling on the port. */
+		/* Stop driving resume signaling on the port. */
 		hprt0 = dwc2_read_hprt0(hsotg);
 		hprt0 &= ~HPRT0_RES;
 		dwc2_writel(hsotg, hprt0, HPRT0);
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index b7254d94fdc3..656acd2f03bd 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -10,7 +10,7 @@
 
 /*
  * This file contains the structures, constants, and interfaces for the
- * Host Contoller Driver (HCD)
+ * Host Controller Driver (HCD)
  *
  * The Host Controller Driver (HCD) is responsible for translating requests
  * from the USB Driver into the appropriate actions on the DWC_otg controller.
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index 703cda5a5895..bdeb2943c4a5 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -415,7 +415,7 @@ static u16 dwc2_calc_starting_frame(struct dwc2_hsotg *hsotg,
 	 * Current frame is 1, scheduled frame is 3. Since HC always fetches
 	 * the descriptor corresponding to curr_frame+1, the descriptor
 	 * corresponding to frame 2 will be fetched. If the number of
-	 * descriptors is max=64 (or greather) the list will be fully programmed
+	 * descriptors is max=64 (or greater) the list will be fully programmed
 	 * with Active descriptors and it is possible case (rare) that the
 	 * latest descriptor(considering rollback) corresponding to frame 2 will
 	 * be serviced first. HS case is more probable because, in fact, up to
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 4f00ff1dc3e1..68e50b94e99f 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -1006,7 +1006,7 @@ static void dwc2_uframe_unschedule(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
  * dwc2_pick_first_frame() - Choose 1st frame for qh that's already scheduled
  *
  * Takes a qh that has already been scheduled (which means we know we have the
- * bandwdith reserved for us) and set the next_active_frame and the
+ * bandwidth reserved for us) and set the next_active_frame and the
  * start_active_frame.
  *
  * This is expected to be called on qh's that weren't previously actively
-- 
2.53.0

[PATCH v2 08/22] usb: dwc3: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/dwc3/core.h | 4 ++--
 drivers/usb/dwc3/glue.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index f3dabb37f806..ba38a3fb9436 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1014,7 +1014,7 @@ struct dwc3_glue_ops {
  * @err_recovery_work: workqueue used for controller error recovery
  * @ep0_trb: trb which is used for the ctrl_req
  * @bounce: address of bounce buffer
- * @setup_buf: used while precessing STD USB requests
+ * @setup_buf: used while processing STD USB requests
  * @ep0_trb_addr: dma address of @ep0_trb
  * @bounce_addr: dma address of @bounce
  * @ep0_usb_req: dummy req used while handling STD USB requests
@@ -1161,7 +1161,7 @@ struct dwc3_glue_ops {
  *			check during HS transmit.
  * @resume_hs_terminations: Set if we enable quirk for fixing improper crc
  *			generation after resume from suspend.
- * @ulpi_ext_vbus_drv: Set to confiure the upli chip to drives CPEN pin
+ * @ulpi_ext_vbus_drv: Set to configure the upli chip to drives CPEN pin
  *			VBUS with an external supply.
  * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
  *			instances in park mode.
diff --git a/drivers/usb/dwc3/glue.h b/drivers/usb/dwc3/glue.h
index d738e1739ae0..a1284c481390 100644
--- a/drivers/usb/dwc3/glue.h
+++ b/drivers/usb/dwc3/glue.h
@@ -30,7 +30,7 @@ struct dwc3_properties {
  * @res: resource for the DWC3 core mmio region
  * @ignore_clocks_and_resets: clocks and resets defined for the device should
  *		be ignored by the DWC3 core, as they are managed by the glue
- * @skip_core_init_mode: Skip the finial initialization of the target mode, as
+ * @skip_core_init_mode: Skip the final initialization of the target mode, as
  *		it must be managed by the glue
  * @properties: dwc3 software manage properties
  */
-- 
2.53.0

[PATCH v2 09/22] usb: fotg210: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/fotg210/fotg210-udc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/fotg210/fotg210-udc.h b/drivers/usb/fotg210/fotg210-udc.h
index 11fe67802537..f64339fcc273 100644
--- a/drivers/usb/fotg210/fotg210-udc.h
+++ b/drivers/usb/fotg210/fotg210-udc.h
@@ -171,7 +171,7 @@
 #define FIFOMAP_EPNO(ep)	((ep) << ((ep) - 1) * 8)
 #define FIFOMAP_EPNOMSK(ep)	(0xF << ((ep) - 1) * 8)
 
-/* Device FIFO Confuguration Register (0x1AC) */
+/* Device FIFO Configuration Register (0x1AC) */
 #define FOTG210_FIFOCF		0x1AC
 #define FIFOCF_TYPE(type, fifo)	((type) << (fifo) * 8)
 #define FIFOCF_BLK_SIN(fifo)	(0x0 << (fifo) * 8 << 2)
-- 
2.53.0

[PATCH v2 10/22] usb: gadget: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/gadget/composite.c               |  4 ++--
 drivers/usb/gadget/epautoconf.c              |  2 +-
 drivers/usb/gadget/function/f_hid.c          |  2 +-
 drivers/usb/gadget/function/f_ncm.c          |  2 +-
 drivers/usb/gadget/function/f_printer.c      |  2 +-
 drivers/usb/gadget/function/f_uac2.c         |  4 ++--
 drivers/usb/gadget/function/ndis.h           |  2 +-
 drivers/usb/gadget/function/rndis.c          |  2 +-
 drivers/usb/gadget/function/storage_common.c |  2 +-
 drivers/usb/gadget/function/u_audio.c        |  2 +-
 drivers/usb/gadget/legacy/inode.c            |  2 +-
 drivers/usb/gadget/udc/aspeed-vhub/ep0.c     |  2 +-
 drivers/usb/gadget/udc/aspeed-vhub/hub.c     |  2 +-
 drivers/usb/gadget/udc/bdc/bdc.h             |  6 +++---
 drivers/usb/gadget/udc/bdc/bdc_cmd.c         |  2 +-
 drivers/usb/gadget/udc/bdc/bdc_core.c        |  4 ++--
 drivers/usb/gadget/udc/bdc/bdc_ep.c          | 10 +++++-----
 drivers/usb/gadget/udc/cdns2/cdns2-ep0.c     |  4 ++--
 drivers/usb/gadget/udc/cdns2/cdns2-gadget.h  |  4 ++--
 drivers/usb/gadget/udc/core.c                |  4 ++--
 drivers/usb/gadget/udc/fsl_qe_udc.h          |  2 +-
 drivers/usb/gadget/udc/fsl_udc_core.c        | 10 +++++-----
 drivers/usb/gadget/udc/gr_udc.c              |  2 +-
 drivers/usb/gadget/udc/m66592-udc.c          |  2 +-
 drivers/usb/gadget/udc/net2280.c             |  2 +-
 drivers/usb/gadget/udc/pch_udc.c             | 20 ++++++++++----------
 drivers/usb/gadget/udc/pxa27x_udc.c          | 12 ++++++------
 drivers/usb/gadget/udc/r8a66597-udc.c        |  2 +-
 drivers/usb/gadget/udc/renesas_usbf.c        |  4 ++--
 drivers/usb/gadget/udc/snps_udc_core.c       |  6 +++---
 drivers/usb/gadget/udc/snps_udc_plat.c       |  2 +-
 drivers/usb/gadget/udc/udc-xilinx.c          |  2 +-
 drivers/usb/gadget/usbstring.c               |  2 +-
 33 files changed, 66 insertions(+), 66 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 1b2238147cfe..4ec54414c927 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -25,7 +25,7 @@
 
 /**
  * struct usb_os_string - represents OS String to be reported by a gadget
- * @bLength: total length of the entire descritor, always 0x12
+ * @bLength: total length of the entire descriptor, always 0x12
  * @bDescriptorType: USB_DT_STRING
  * @qwSignature: the OS String proper
  * @bMS_VendorCode: code used by the host for subsequent requests
@@ -1556,7 +1556,7 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
 				req->status, req->actual, req->length);
 
 	/*
-	 * REVIST The same ep0 requests are shared with function drivers
+	 * REVISIT The same ep0 requests are shared with function drivers
 	 * so they don't have to maintain the same ->complete() stubs.
 	 *
 	 * Because of that, we need to check for the validity of ->context
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 30016b805bfd..8013bf6be6dd 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -29,7 +29,7 @@
  *    supports a different number of streams.
  *
  * This routine replaces the usb_ep_autoconfig when needed
- * superspeed enhancments. If such enhancemnets are required,
+ * superspeed enhancements. If such enhancemnets are required,
  * the FD should call usb_ep_autoconfig_ss directly and provide
  * the additional ep_comp parameter.
  *
diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c
index 3c6b43d06a6d..cf54704b7655 100644
--- a/drivers/usb/gadget/function/f_hid.c
+++ b/drivers/usb/gadget/function/f_hid.c
@@ -618,7 +618,7 @@ static void get_report_workqueue_handler(struct work_struct *work)
 			 */
 			req->buf = ptr->report_data.data;
 		} else {
-			/* If there are no prevoiusly sent reports send empty report */
+			/* If there are no previously sent reports send empty report */
 			req->buf = hidg->get_report.data;
 			memset(req->buf, 0x0, req->length);
 		}
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 500c9c19c78b..f15e1c809a7d 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -612,7 +612,7 @@ static void ncm_notify(struct f_ncm *ncm)
 	 *
 	 * If ncm_notify() is called before the second (CONNECT)
 	 * notification is sent, then it will reset to send the SPEED
-	 * notificaion again (and again, and again), but it's not a problem
+	 * notification again (and again, and again), but it's not a problem
 	 */
 	ncm->notify_state = NCM_NOTIFY_SPEED;
 	ncm_do_notify(ncm);
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 1857d786110b..3f25d99be34d 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -557,7 +557,7 @@ printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 
 		/* If we not returning all the data left in this RX request
 		 * buffer then adjust the amount of data left in the buffer.
-		 * Othewise if we are done with this RX request buffer then
+		 * Otherwise if we are done with this RX request buffer then
 		 * requeue it to get any incoming data from the USB host.
 		 */
 		if (size < current_rx_bytes) {
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index d8cf710085a0..f9ca07dec17e 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -206,7 +206,7 @@ static struct uac2_input_terminal_descriptor io_in_it_desc = {
 	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
 };
 
-/* Ouput Terminal for USB_IN */
+/* Output Terminal for USB_IN */
 static struct uac2_output_terminal_descriptor usb_in_ot_desc = {
 	.bLength = sizeof usb_in_ot_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
@@ -220,7 +220,7 @@ static struct uac2_output_terminal_descriptor usb_in_ot_desc = {
 	.bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL),
 };
 
-/* Ouput Terminal for I/O-Out */
+/* Output Terminal for I/O-Out */
 static struct uac2_output_terminal_descriptor io_out_ot_desc = {
 	.bLength = sizeof io_out_ot_desc,
 	.bDescriptorType = USB_DT_CS_INTERFACE,
diff --git a/drivers/usb/gadget/function/ndis.h b/drivers/usb/gadget/function/ndis.h
index a19f72dec0cd..16e87628d37b 100644
--- a/drivers/usb/gadget/function/ndis.h
+++ b/drivers/usb/gadget/function/ndis.h
@@ -4,7 +4,7 @@
  * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de>
  *
  * Thanks to the cygwin development team,
- * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net>
+ * especially to Casper S. Hornstrup <chorns@users.sourceforge.net>
  *
  * THIS SOFTWARE IS NOT COPYRIGHTED
  *
diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c
index a2fd239b7ad3..0d3f784dc945 100644
--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -731,7 +731,7 @@ static int rndis_keepalive_response(struct rndis_params *params,
 
 
 /*
- * Device to Host Comunication
+ * Device to Host Communication
  */
 static int rndis_indicate_status_msg(struct rndis_params *params, u32 status)
 {
diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c
index 75831f2c7abe..cc90e252925c 100644
--- a/drivers/usb/gadget/function/storage_common.c
+++ b/drivers/usb/gadget/function/storage_common.c
@@ -3,7 +3,7 @@
  * storage_common.c -- Common definitions for mass storage functionality
  *
  * Copyright (C) 2003-2008 Alan Stern
- * Copyeight (C) 2009 Samsung Electronics
+ * Copyright (C) 2009 Samsung Electronics
  * Author: Michal Nazarewicz (mina86@mina86.com)
  */
 
diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
index f0ee83abcebc..11d8a304a38e 100644
--- a/drivers/usb/gadget/function/u_audio.c
+++ b/drivers/usb/gadget/function/u_audio.c
@@ -129,7 +129,7 @@ static void u_audio_set_fback_frequency(enum usb_device_speed speed,
 		 * in samples/microframe.
 		 * Format is encoded in Q12.13 fitted into four bytes so that
 		 * the binary point is located between the second and the third
-		 * byte fromat (that is Q16.16)
+		 * byte format (that is Q16.16)
 		 *
 		 * ff = (freq << 16) / 8000
 		 *
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 7f6d8460152f..cc059a6ee262 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -2081,7 +2081,7 @@ static const struct file_operations ep0_operations = {
 
 
 /* FIXME PAM etc could set this security policy without mount options
- * if epfiles inherited ownership and permissons from ep0 ...
+ * if epfiles inherited ownership and permissions from ep0 ...
  */
 
 static unsigned default_uid;
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
index e9aa74231760..6b363aa6f8bd 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/ep0.c
@@ -365,7 +365,7 @@ static int ast_vhub_ep0_queue(struct usb_ep* u_ep, struct usb_request *u_req,
 	struct device *dev = &vhub->pdev->dev;
 	unsigned long flags;
 
-	/* Paranoid cheks */
+	/* Paranoid checks */
 	if (!u_req || (!u_req->complete && !req->internal)) {
 		dev_warn(dev, "Bogus EP0 request ! u_req=%p\n", u_req);
 		if (u_req) {
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
index d0345f31037a..5a9accd8fb53 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c
@@ -551,7 +551,7 @@ void ast_vhub_device_connect(struct ast_vhub *vhub,
 					  0, true);
 
 	/*
-	 * If the hub is set to wakup the host on connection events
+	 * If the hub is set to wakeup the host on connection events
 	 * then send a wakeup.
 	 */
 	if (vhub->wakeup_en)
diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
index 2f4abf6f8f77..d967bd5bd625 100644
--- a/drivers/usb/gadget/udc/bdc/bdc.h
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -361,13 +361,13 @@ struct bdc_ep {
 	/* endpoint bd list*/
 	struct bd_list bd_list;
 	/*
-	 * HW generates extra event for multi bd tranfers, this flag helps in
+	 * HW generates extra event for multi bd transfers, this flag helps in
 	 * ignoring the extra event
 	 */
 	bool ignore_next_sr;
 };
 
-/* bdc cmmand parameter structure */
+/* bdc command parameter structure */
 struct bdc_cmd_params {
 	u32	param2;
 	u32	param1;
@@ -414,7 +414,7 @@ struct bdc {
 	/* num of endpoints for a particular instantiation of IP */
 	unsigned int num_eps;
 	/*
-	 * Array of ep's, it uses the same index covention as bdc hw i.e.
+	 * Array of ep's, it uses the same index convention as bdc hw i.e.
 	 * 1 for ep0, 2 for 1out,3 for 1in ....
 	 */
 	struct bdc_ep		**bdc_ep_array;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_cmd.c b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
index 1848ced073f8..831b0e252a2b 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_cmd.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_cmd.c
@@ -116,7 +116,7 @@ int bdc_dconfig_ep(struct bdc *bdc, struct bdc_ep *ep)
 	return bdc_submit_cmd(bdc, cmd_sc, 0, 0, 0);
 }
 
-/* Reinitalize the bdlist after config ep command */
+/* Reinitialize the bdlist after config ep command */
 static void ep_bd_list_reinit(struct bdc_ep *ep)
 {
 	struct bdc *bdc = ep->bdc;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index a8dbaef54aba..cd16b6010edd 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -296,7 +296,7 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 			for (i = 1; i < bdc->num_eps; ++i)
 				bdc->bdc_ep_array[i]->flags = 0;
 	} else {
-		/* One time initiaization only */
+		/* One time initialization only */
 		/* Enable status report function pointers */
 		bdc->sr_handler[0] = bdc_sr_xsf;
 		bdc->sr_handler[1] = bdc_sr_uspc;
@@ -361,7 +361,7 @@ int bdc_reinit(struct bdc *bdc)
 	return ret;
 }
 
-/* Allocate all the dyanmic memory */
+/* Allocate all the dynamic memory */
 static int bdc_mem_alloc(struct bdc *bdc)
 {
 	u32 page_size;
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index a7a22e5ec47b..039941009f1a 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -198,7 +198,7 @@ static inline int bd_needed_req(struct bdc_req *req)
 	if (req->usb_req.length == 0)
 		return 1;
 
-	/* remaining bytes after tranfering all max BD size BD's */
+	/* remaining bytes after transferring all max BD size BD's */
 	remaining = req->usb_req.length % BD_MAX_BUFF_SIZE;
 	if (remaining)
 		bd_needed++;
@@ -298,8 +298,8 @@ static int bd_available_ep(struct bdc_ep *ep)
 		return bd_list->max_bdi - bd_list->num_tabs;
 
 	/*
-	 * Depending upon where eqp and dqp pointers are, caculate number
-	 * of avaialble bd's
+	 * Depending upon where eqp and dqp pointers are, calculate number
+	 * of available bd's
 	 */
 	if (bd_list->hwd_bdi < bd_list->eqp_bdi) {
 		/* available bd's are from eqp..max_bds + 0..dqp - chain_bds */
@@ -519,7 +519,7 @@ static int bdc_queue_xfr(struct bdc *bdc, struct bdc_req *req)
 	num_bds =  bd_needed_req(req);
 	bd_available = bd_available_ep(ep);
 
-	/* how many bd's are avaialble on ep */
+	/* how many bd's are available on ep */
 	if (num_bds > bd_available)
 		return -ENOMEM;
 
@@ -1093,7 +1093,7 @@ static void ep0_stall(struct bdc *bdc)
 	bdc->delayed_status = false;
 	ep_set_halt(ep, 1);
 
-	/* de-queue any pendig requests */
+	/* de-queue any pending requests */
 	while (!list_empty(&ep->queue)) {
 		req = list_entry(ep->queue.next, struct bdc_req,
 				queue);
diff --git a/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c b/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c
index a5a9d395fd0d..802b7614ddea 100644
--- a/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c
+++ b/drivers/usb/gadget/udc/cdns2/cdns2-ep0.c
@@ -495,7 +495,7 @@ void cdns2_handle_ep0_interrupt(struct cdns2_device *pdev, int dir)
 
 /*
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active.
+ * endpoint 0 is always active.
  */
 static int cdns2_gadget_ep0_enable(struct usb_ep *ep,
 				   const struct usb_endpoint_descriptor *desc)
@@ -505,7 +505,7 @@ static int cdns2_gadget_ep0_enable(struct usb_ep *ep,
 
 /*
  * Function shouldn't be called by gadget driver,
- * endpoint 0 is allways active.
+ * endpoint 0 is always active.
  */
 static int cdns2_gadget_ep0_disable(struct usb_ep *ep)
 {
diff --git a/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
index b5d5ec12e986..2ef1dea605ae 100644
--- a/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
+++ b/drivers/usb/gadget/udc/cdns2/cdns2-gadget.h
@@ -540,8 +540,8 @@ struct cdns2_ring {
  * @trb_burst_size: number of burst used in TRB.
  * @skip: Sometimes the controller cannot process isochronous endpoint ring
  *        quickly enough and it will miss some isoc tds on the ring and
- *        generate ISO transmition error.
- *        Driver sets skip flag when receive a ISO transmition error and
+ *        generate ISO transmission error.
+ *        Driver sets skip flag when receive a ISO transmission error and
  *        process the missed TDs on the endpoint ring.
  * @wa1_set: use WA1.
  * @wa1_trb: TRB assigned to WA1.
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index d5844384c368..5ad5639a5ed1 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1014,7 +1014,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
 /* ------------------------------------------------------------------------- */
 
 /**
- * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ * gadget_find_ep_by_name - returns ep whose name is the same as string passed
  *	in second parameter or NULL if searched endpoint not found
  * @g: controller to check for quirk
  * @name: name of searched endpoint
@@ -1525,7 +1525,7 @@ EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
 /**
  * usb_get_gadget_udc_name - get the name of the first UDC controller
  * This functions returns the name of the first UDC controller in the system.
- * Please note that this interface is usefull only for legacy drivers which
+ * Please note that this interface is useful only for legacy drivers which
  * assume that there is only one UDC controller in the system and they need to
  * get its name before initialization. There is no guarantee that the UDC
  * of the returned name will be still available, when gadget driver registers
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.h b/drivers/usb/gadget/udc/fsl_qe_udc.h
index 53ca0ff7c2cb..902b0de88eca 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.h
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.h
@@ -213,7 +213,7 @@ struct qe_frame{
 #define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
 #define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
 #define RX_ER_PID              0x01000000 /* Wrong PID received */
-/* Tranmit side */
+/* Transmit side */
 #define TX_ER_NAK              0x00800000 /* Received NAK handshake */
 #define TX_ER_STALL            0x00400000 /* Received STALL handshake */
 #define TX_ER_TIMEOUT          0x00200000 /* Transmit time out */
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 878d70b55530..f8fd6fd327ec 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -472,7 +472,7 @@ static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
 ********************************************************************/
 
 /*------------------------------------------------------------------
-* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
+* struct_ep_qh_setup(): set the Endpoint Capabilities field of QH
  * @zlt: Zero Length Termination Select (1: disable; 0: enable)
  * @mult: Mult field
  ------------------------------------------------------------------*/
@@ -484,7 +484,7 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
 	struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
 	unsigned int tmp = 0;
 
-	/* set the Endpoint Capabilites in QH */
+	/* set the Endpoint Capabilities in QH */
 	switch (ep_type) {
 	case USB_ENDPOINT_XFER_CONTROL:
 		/* Interrupt On Setup (IOS). for control ep  */
@@ -594,7 +594,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 	ep->stopped = 0;
 
 	/* Controller related setup */
-	/* Init EPx Queue Head (Ep Capabilites field in QH
+	/* Init EPx Queue Head (Ep Capabilities field in QH
 	 * according to max, zlt, mult) */
 	struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
 			(unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
@@ -1398,7 +1398,7 @@ __acquires(udc->lock)
 
 	udc_reset_ep_queue(udc, 0);
 
-	/* We process some stardard setup requests here */
+	/* We process some standard setup requests here */
 	switch (setup->bRequest) {
 	case USB_REQ_GET_STATUS:
 		/* Data+Status phase from udc */
@@ -1831,7 +1831,7 @@ static void reset_irq(struct fsl_udc *udc)
 
 	if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
 		dev_vdbg(udc->dev, "Bus reset\n");
-		/* Bus is reseting */
+		/* Bus is resetting */
 		udc->bus_reset = 1;
 		/* Reset all the queues, include XD, dTD, EP queue
 		 * head and TR Queue */
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index cdcbfae140e9..4426caa999a8 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -470,7 +470,7 @@ static int gr_add_dma_desc(struct gr_ep *ep, struct gr_request *req,
  * The first descriptor in the chain is enabled, the rest disabled. The
  * interrupt handler will later enable them one by one when needed so we can
  * find out when the transfer is finished. For OUT endpoints, all descriptors
- * therefore generate interrutps.
+ * therefore generate interrupts.
  */
 static int gr_setup_out_desc_list(struct gr_ep *ep, struct gr_request *req,
 				  gfp_t gfp_flags)
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index d77c11c4eb38..18578975b1df 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -599,7 +599,7 @@ static void init_controller(struct m66592 *m66592)
 		m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
 		m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
 
-		/* This is a workaound for SH7722 2nd cut */
+		/* This is a workaround for SH7722 2nd cut */
 		m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
 		m66592_bset(m66592, 0x1000, M66592_TESTMODE);
 		m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 7c5f30cfd24d..0438bfed445f 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1938,7 +1938,7 @@ static void defect7374_disable_data_eps(struct net2280 *dev)
 	/*
 	 * For Defect 7374, disable data EPs (and more):
 	 *  - This phase undoes the earlier phase of the Defect 7374 workaround,
-	 *    returing ep regs back to normal.
+	 *    returning ep regs back to normal.
 	 */
 	struct net2280_ep *ep;
 	int i;
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 99b3ce28210f..abcf3dbca29f 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -53,7 +53,7 @@
 #define UDC_EPCTL_F			(1 << 1)
 #define UDC_EPCTL_S			(1 << 0)
 #define UDC_EPCTL_ET_SHIFT		4
-/* Mask patern */
+/* Mask pattern */
 #define UDC_EPCTL_ET_MASK		0x00000030
 /* Value for ET field */
 #define UDC_EPCTL_ET_CONTROL		0
@@ -73,7 +73,7 @@
 #define UDC_EPSTS_BNA			(1 << 7)
 #define UDC_EPSTS_IN			(1 << 6)
 #define UDC_EPSTS_OUT_SHIFT		4
-/* Mask patern */
+/* Mask pattern */
 #define UDC_EPSTS_OUT_MASK		0x00000030
 #define UDC_EPSTS_ALL_CLR_MASK		0x1F0006F0
 /* Value for OUT field */
@@ -110,7 +110,7 @@
 #define UDC_DEVSTS_ALT_SHIFT		8
 #define UDC_DEVSTS_INTF_SHIFT		4
 #define UDC_DEVSTS_CFG_SHIFT		0
-/* Mask patern */
+/* Mask pattern */
 #define UDC_DEVSTS_TS_MASK		0xfffc0000
 #define UDC_DEVSTS_ENUM_SPEED_MASK	0x00006000
 #define UDC_DEVSTS_ALT_MASK		0x00000f00
@@ -132,7 +132,7 @@
 #define UDC_DEVINT_ES			(1 << 2)
 #define UDC_DEVINT_SI			(1 << 1)
 #define UDC_DEVINT_SC			(1 << 0)
-/* Mask patern */
+/* Mask pattern */
 #define UDC_DEVINT_MSK			0x7f
 
 /* Endpoint irq register */
@@ -141,7 +141,7 @@
 #define UDC_EPINT_OUT_SHIFT		16
 #define UDC_EPINT_IN_EP0		(1 << 0)
 #define UDC_EPINT_OUT_EP0		(1 << 16)
-/* Mask patern */
+/* Mask pattern */
 #define UDC_EPINT_MSK_DISABLE_ALL	0xffffffff
 
 /* UDC_CSR_BUSY Status register */
@@ -162,7 +162,7 @@
 #define UDC_CSR_NE_INTF_SHIFT		11
 #define UDC_CSR_NE_ALT_SHIFT		15
 #define UDC_CSR_NE_MAX_PKT_SHIFT	19
-/* Mask patern */
+/* Mask pattern */
 #define UDC_CSR_NE_NUM_MASK		0x0000000f
 #define UDC_CSR_NE_DIR_MASK		0x00000010
 #define UDC_CSR_NE_TYPE_MASK		0x00000060
@@ -296,7 +296,7 @@ struct pch_udc_ep {
 };
 
 /**
- * struct pch_vbus_gpio_data - Structure holding GPIO informaton
+ * struct pch_vbus_gpio_data - Structure holding GPIO information
  *					for detecting VBUS
  * @port:		gpio descriptor for the VBUS GPIO
  * @intr:		gpio interrupt number
@@ -319,7 +319,7 @@ struct pch_vbus_gpio_data {
  * @ep:			array of endpoints
  * @lock:		protects all state
  * @stall:		stall requested
- * @prot_stall:		protcol stall requested
+ * @prot_stall:		protocol stall requested
  * @suspended:		driver in suspended state
  * @connected:		gadget driver associated
  * @vbus_session:	required vbus_session state
@@ -332,7 +332,7 @@ struct pch_vbus_gpio_data {
  * @base_addr:		for mapped device memory
  * @bar:		PCI BAR used for mapped device memory
  * @cfg_data:		current cfg, intf, and alt in use
- * @vbus_gpio:		GPIO informaton for detecting VBUS
+ * @vbus_gpio:		GPIO information for detecting VBUS
  */
 struct pch_udc_dev {
 	struct usb_gadget		gadget;
@@ -846,7 +846,7 @@ static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
 }
 
 /**
- * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * pch_udc_write_ep_interrupts() - Clear endpoint interrupts
  * @dev:	Reference to structure of type pch_udc_regs
  * @val:	The value to be written to interrupt register
  */
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index df5cca43afbe..9fd079cb65c6 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -1037,7 +1037,7 @@ static int write_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * special case of ep0 setup :
  *   (irq->handle_ep0_ctrl_req->gadget_setup->pxa_ep_queue)
  *
- * Returns 0 if succedeed, error otherwise
+ * Returns 0 if succeeded, error otherwise
  */
 static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
 			gfp_t gfp_flags)
@@ -1535,7 +1535,7 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active)
  * @_gadget: usb gadget
  * @is_active: 0 if should disable the udc, 1 if should enable
  *
- * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the
+ * Enables the udc, and optionally activates D+ pullup resistor. Or disables the
  * udc, and deactivates D+ pullup resistor.
  *
  * Returns 0
@@ -1943,7 +1943,7 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc,
  *     STAGE. The driver add STATUS STAGE to send last zero length packet in
  *     OUT_STATUS_STAGE.
  *   - special attention was needed for IN_STATUS_STAGE. If a packet complete
- *     event is detected, we terminate the status stage without ackowledging the
+ *     event is detected, we terminate the status stage without acknowledging the
  *     packet (not to risk to loose a potential SETUP packet)
  */
 static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
@@ -2023,7 +2023,7 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq)
 }
 
 /**
- * handle_ep - Handle endpoint data tranfers
+ * handle_ep - Handle endpoint data transfers
  * @ep: pxa physical endpoint
  *
  * Tries to transfer all pending request data into the endpoint and/or
@@ -2091,7 +2091,7 @@ static void handle_ep(struct pxa_ep *ep)
  * @config: usb configuration
  *
  * Post the request to upper level.
- * Don't use any pxa specific harware configuration capabilities
+ * Don't use any pxa specific hardware configuration capabilities
  */
 static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
 {
@@ -2121,7 +2121,7 @@ static void pxa27x_change_configuration(struct pxa_udc *udc, int config)
  * @alt: alternate setting number
  *
  * Post the request to upper level.
- * Don't use any pxa specific harware configuration capabilities
+ * Don't use any pxa specific hardware configuration capabilities
  */
 static void pxa27x_change_interface(struct pxa_udc *udc, int iface, int alt)
 {
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index 915786c9628c..c7477eb4b2d4 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -652,7 +652,7 @@ static int sudmac_alloc_channel(struct r8a66597 *r8a66597,
 		change_bfre_mode(r8a66597, ep->pipenum, 1);
 	}
 
-	/* set r8a66597_ep paramters */
+	/* set r8a66597_ep parameters */
 	ep->use_dma = 1;
 	ep->dma = dma;
 	ep->fifoaddr = D0FIFO;
diff --git a/drivers/usb/gadget/udc/renesas_usbf.c b/drivers/usb/gadget/udc/renesas_usbf.c
index 367c9e73f366..cb6b365ab17c 100644
--- a/drivers/usb/gadget/udc/renesas_usbf.c
+++ b/drivers/usb/gadget/udc/renesas_usbf.c
@@ -858,7 +858,7 @@ static int usbf_epn_dma_in(struct usbf_ep *epn, struct usbf_req *req)
 		usbf_ep_reg_bitset(epn, USBF_REG_EPN_CONTROL, USBF_EPN_AUTO);
 
 		/* The end of DMA transfer at the USBF level needs to be handle
-		 * after the detection of the end of DMA transfer at the brige
+		 * after the detection of the end of DMA transfer at the bridge
 		 * level.
 		 * To force this sequence, EPN_IN_END_EN will be set by the
 		 * detection of the end of transfer at bridge level (ie. bridge
@@ -1075,7 +1075,7 @@ static void usbf_epn_dma_out_send_dma(struct usbf_ep *epn, dma_addr_t addr, u32
 				USBF_EPN_SET_DMACNT(0));
 
 		/* The end of DMA transfer at the USBF level needs to be handled
-		 * after the detection of the end of DMA transfer at the brige
+		 * after the detection of the end of DMA transfer at the bridge
 		 * level.
 		 * To force this sequence, enabling the OUT_END interrupt will
 		 * be donee by the detection of the end of transfer at bridge
diff --git a/drivers/usb/gadget/udc/snps_udc_core.c b/drivers/usb/gadget/udc/snps_udc_core.c
index d506f9d92bca..1cb29c1a0926 100644
--- a/drivers/usb/gadget/udc/snps_udc_core.c
+++ b/drivers/usb/gadget/udc/snps_udc_core.c
@@ -82,7 +82,7 @@ static int stop_timer;
  * in the FIFO (important for not blocking control traffic).
  * The value of set_rde controls the corresponding timer.
  *
- * set_rde -1 == not used, means it is alloed to be set to 0 or 1
+ * set_rde -1 == not used, means it is allowed to be set to 0 or 1
  * set_rde  0 == do not touch RDE, do no start the RDE timer
  * set_rde  1 == timer function will look whether FIFO has data
  * set_rde  2 == set by timer function to enable RX DMA on next call
@@ -1213,7 +1213,7 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp)
 				DBG(dev, "udc_queue(): pending bytes in "
 					"rxfifo after nyet\n");
 				/*
-				 * read pending bytes afer nyet:
+				 * read pending bytes after nyet:
 				 * referring to isr
 				 */
 				if (udc_rxfifo_read(ep, req)) {
@@ -1328,7 +1328,7 @@ udc_set_halt(struct usb_ep *usbep, int halt)
 		else {
 			/*
 			 * set STALL
-			 * rxfifo empty not taken into acount
+			 * rxfifo empty not taken into account
 			 */
 			tmp = readl(&ep->regs->ctl);
 			tmp |= AMD_BIT(UDC_EPCTL_S);
diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c
index 8ce43c4f8fba..a2350db814c3 100644
--- a/drivers/usb/gadget/udc/snps_udc_plat.c
+++ b/drivers/usb/gadget/udc/snps_udc_plat.c
@@ -36,7 +36,7 @@ static void stop_udc(struct udc *udc)
 
 	spin_lock(&udc->lock);
 
-	/* Flush the receieve fifo */
+	/* Flush the receive fifo */
 	reg = readl(&udc->regs->ctl);
 	reg |= AMD_BIT(UDC_DEVCTL_SRX_FLUSH);
 	writel(reg, &udc->regs->ctl);
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
index bef06fe7543b..20fe241b4275 100644
--- a/drivers/usb/gadget/udc/udc-xilinx.c
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -311,7 +311,7 @@ static void xudc_epconfig(struct xusb_ep *ep, struct xusb_udc *udc)
  * Return: 0 on success, error code on failure
  *
  * This function starts DMA transfer by writing to DMA source,
- * destination and lenth registers.
+ * destination and length registers.
  */
 static int xudc_start_dma(struct xusb_ep *ep, dma_addr_t src,
 			  dma_addr_t dst, u32 length)
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 37a2f1b61cba..51bf85f1e343 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -25,7 +25,7 @@
  * string descriptor in utf16-le.
  * Returns length of descriptor (always even) or negative errno
  *
- * If your driver needs stings in multiple languages, you'll probably
+ * If your driver needs strings in multiple languages, you'll probably
  * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
  * using this routine after choosing which set of UTF-8 strings to use.
  * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
-- 
2.53.0

[PATCH v2 11/22] usb: host: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/host/ehci-brcm.c   | 2 +-
 drivers/usb/host/ehci-sched.c  | 2 +-
 drivers/usb/host/fhci-q.c      | 2 +-
 drivers/usb/host/fhci-tds.c    | 8 ++++----
 drivers/usb/host/octeon-hcd.c  | 2 +-
 drivers/usb/host/ohci-q.c      | 2 +-
 drivers/usb/host/ohci-sa1111.c | 2 +-
 drivers/usb/host/xhci-dbgcap.h | 2 +-
 drivers/usb/host/xhci-mem.c    | 4 ++--
 drivers/usb/host/xhci-mtk.c    | 2 +-
 drivers/usb/host/xhci-mtk.h    | 2 +-
 drivers/usb/host/xhci-port.h   | 4 ++--
 drivers/usb/host/xhci-rcar.c   | 2 +-
 drivers/usb/host/xhci.h        | 2 +-
 14 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/host/ehci-brcm.c b/drivers/usb/host/ehci-brcm.c
index 5e3156f94cc6..d1f363c7d8d7 100644
--- a/drivers/usb/host/ehci-brcm.c
+++ b/drivers/usb/host/ehci-brcm.c
@@ -42,7 +42,7 @@ static inline void ehci_brcm_wait_for_sof(struct ehci_hcd *ehci, u32 delay)
  * ehci_brcm_hub_control
  * The EHCI controller has a bug where it can violate the SOF
  * interval between the first two SOF's transmitted after resume
- * if the resume occurs near the end of the microframe. This causees
+ * if the resume occurs near the end of the microframe. This causes
  * the controller to detect babble on the suspended port and
  * will eventually cause the controller to reset the port.
  * The fix is to Intercept the echi-hcd request to complete RESUME and
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 57d07d1c2dfa..ff59524f8d2b 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -315,7 +315,7 @@ static int __maybe_unused same_tt(struct usb_device *dev1,
 static const unsigned char
 max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
 
-/* carryover low/fullspeed bandwidth that crosses uframe boundries */
+/* carryover low/fullspeed bandwidth that crosses uframe boundaries */
 static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
 {
 	int i;
diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c
index 669c240523fe..b13ad02454e1 100644
--- a/drivers/usb/host/fhci-q.c
+++ b/drivers/usb/host/fhci-q.c
@@ -208,7 +208,7 @@ void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb)
 }
 
 /*
- * caculate transfer length/stats and update the urb
+ * calculate transfer length/stats and update the urb
  * Precondition: irqsafe(only for urb-?status locking)
  */
 void fhci_done_td(struct urb *urb, struct td *td)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index d7482dc0604e..0ed1c0fcaaeb 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -234,9 +234,9 @@ u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem,
 /*
  * initialize the endpoint register according to the given parameters
  *
- * artuments:
- * usb		A pointer to the data strucutre of the USB
- * ep		A pointer to the endpoint structre
+ * arguments:
+ * usb		A pointer to the data structure of the USB
+ * ep		A pointer to the endpoint structure
  * data_mem	The data memory partition(BUS)
  */
 void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
@@ -367,7 +367,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
  * Arguments:
  * usb          A pointer to the USB structure
  * pkt          A pointer to the user frame structure
- * trans_type   Transaction tyep - IN,OUT or SETUP
+ * trans_type   Transaction type - IN,OUT or SETUP
  * dest_addr    Device address - 0~127
  * dest_ep      Endpoint number of the device - 0~16
  * trans_mode   Pipe type - ISO,Interrupt,bulk or control
diff --git a/drivers/usb/host/octeon-hcd.c b/drivers/usb/host/octeon-hcd.c
index 4929c6a8e733..cf4175246978 100644
--- a/drivers/usb/host/octeon-hcd.c
+++ b/drivers/usb/host/octeon-hcd.c
@@ -2847,7 +2847,7 @@ static int cvmx_usb_poll_channel(struct octeon_hcd *usb, int channel)
 	if (WARN_ON_ONCE(bytes_this_transfer < 0)) {
 		/*
 		 * In some rare cases the DMA engine seems to get stuck and
-		 * keeps substracting same byte count over and over again. In
+		 * keeps subtracting same byte count over and over again. In
 		 * such case we just need to fail every transaction.
 		 */
 		cvmx_usb_complete(usb, pipe, transaction,
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 3b445312beea..21916f762b49 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -137,7 +137,7 @@ static int balance (struct ohci_hcd *ohci, int interval, int load)
 /*-------------------------------------------------------------------------*/
 
 /* both iso and interrupt requests have periods; this routine puts them
- * into the schedule tree in the apppropriate place.  most iso devices use
+ * into the schedule tree in the appropriate place.  most iso devices use
  * 1msec periods, but that's not required.
  */
 static void periodic_link (struct ohci_hcd *ohci, struct ed *ed)
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index aca0338a2983..5df8108b777f 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -183,7 +183,7 @@ static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev)
 
 	/*
 	 * We don't call dma_set_mask_and_coherent() here because the
-	 * DMA mask has already been appropraitely setup by the core
+	 * DMA mask has already been appropriately setup by the core
 	 * SA-1111 bus code (which includes bug workarounds.)
 	 */
 
diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h
index 5b18efb2c1ea..32c26b42c583 100644
--- a/drivers/usb/host/xhci-dbgcap.h
+++ b/drivers/usb/host/xhci-dbgcap.h
@@ -78,7 +78,7 @@ struct dbc_str_descs {
 
 /*
  * NULL terminated UTF-8 strings used to create UTF-16 strings
- * (with maxiumum USB_MAX_STRING_LEN 2 byte characters).
+ * (with maximum USB_MAX_STRING_LEN 2 byte characters).
  */
 struct dbc_str {
 	char	manufacturer[USB_MAX_STRING_LEN+1];
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index af8d4b74c4ba..124eb6dc5774 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1442,7 +1442,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 
 	/*
 	 * Get values to fill the endpoint context, mostly from ep descriptor.
-	 * The average TRB buffer lengt for bulk endpoints is unclear as we
+	 * The average TRB buffer length for bulk endpoints is unclear as we
 	 * have no clue on scatter gather list entry size. For Isoc and Int,
 	 * set it to max available. See xHCI 1.1 spec 4.14.1.1 for details.
 	 */
@@ -2105,7 +2105,7 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 			port_cap->psi[i] = readl(addr + 4 + i);
 
 			/* count unique ID values, two consecutive entries can
-			 * have the same ID if link is assymetric
+			 * have the same ID if link is asymmetric
 			 */
 			if (i && (XHCI_EXT_PORT_PSIV(port_cap->psi[i]) !=
 				  XHCI_EXT_PORT_PSIV(port_cap->psi[i - 1])))
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 60af5fe29bd4..6e7611f89596 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -173,7 +173,7 @@ static void xhci_mtk_set_frame_interval(struct xhci_hcd_mtk *mtk)
 
 /*
  * workaround: usb3.2 gen1 isoc rx hw issue
- * host send out unexpected ACK afer device fininsh a burst transfer with
+ * host send out unexpected ACK after device fininsh a burst transfer with
  * a short packet.
  */
 static void xhci_mtk_rxfifo_depth_set(struct xhci_hcd_mtk *mtk)
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index 2274f5995171..0e29da1cea5e 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -79,7 +79,7 @@ struct mu3h_sch_bw_info {
  * @maxpkt: max packet size of endpoint
  * @ep: address of usb_host_endpoint struct
  * @speed: usb device speed
- * @allocated: the bandwidth is aready allocated from bus_bw
+ * @allocated: the bandwidth is already allocated from bus_bw
  * @offset: which uframe of the interval that transfer should be
  *		scheduled first time within the interval
  * @repeat: the time gap between two uframes that transfers are
diff --git a/drivers/usb/host/xhci-port.h b/drivers/usb/host/xhci-port.h
index 889b5fb0fcd8..96b737070421 100644
--- a/drivers/usb/host/xhci-port.h
+++ b/drivers/usb/host/xhci-port.h
@@ -102,7 +102,7 @@
 
 
 /* Cold Attach Status - xHC can set this bit to report device attached during
- * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * Sx state. Warm port reset should be performed to clear this bit and move port
  * to connected state.
  */
 #define PORT_CAS	(1 << 24)
@@ -174,7 +174,7 @@
 
 /*
  * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports
- * to complete link training. usually link trainig completes much faster
+ * to complete link training. usually link training completes much faster
  * so check status 10 times with 36ms sleep in places we need to wait for
  * polling to complete.
  */
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index d747c0905827..949846532c74 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -205,7 +205,7 @@ static int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
  *
  * And, since the firmware/internal CPU control the USBSTS.STS_HALT
  * and the process speed is down when the roothub port enters U3,
- * long delay for the handshake of STS_HALT is neeed in xhci_suspend()
+ * long delay for the handshake of STS_HALT is need in xhci_suspend()
  * by using the XHCI_SLOW_SUSPEND quirk.
  */
 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ec4bfeb4887c..86a615c6fd2b 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -461,7 +461,7 @@ struct xhci_ep_ctx {
 #define EP_STATE_ERROR		4
 #define GET_EP_CTX_STATE(ctx)	(le32_to_cpu((ctx)->ep_info) & EP_STATE_MASK)
 
-/* Mult - Max number of burtst within an interval, in EP companion desc. */
+/* Mult - Max number of burst within an interval, in EP companion desc. */
 #define EP_MULT(p)		(((p) & 0x3) << 8)
 #define CTX_TO_EP_MULT(p)	(((p) >> 8) & 0x3)
 /* bits 10:14 are Max Primary Streams */
-- 
2.53.0

Re: [PATCH v2 11/22] usb: host: fix a few spelling mistakes in comments

[Michal Pecio]

On Tue, 10 Nov 2026 07:58:14 +0000, Shunbo Shi wrote:
> No functional changes.
> 
> Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>

Hi,

Not 100% sure, but hasn't Greg KH indicated no interest in such patches
for drivers outside of staging?

I don't like them either, IMO the noise added to git-blame is usually
more annoying in practice than original errors.

> - * long delay for the handshake of STS_HALT is neeed in xhci_suspend()
> + * long delay for the handshake of STS_HALT is need in xhci_suspend()

> -/* Mult - Max number of burtst within an interval, in EP companion desc. */
> +/* Mult - Max number of burst within an interval, in EP companion desc. */

So words that don't exist have been replaced with words that exist.
But the text is still wrong.

These are just two random examples near the end, I haven't read even
a fraction of the whole thing.

Another issue I have seen in those patches are fixes to comments that
aren't even true anymore, but the author has no idea of course.

Regards,
Michal

[PATCH v2 12/22] usb: image: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/image/mdc800.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c
index f7caa1c5cbb7..72cab4bfe01b 100644
--- a/drivers/usb/image/mdc800.c
+++ b/drivers/usb/image/mdc800.c
@@ -59,7 +59,7 @@
  * has been removed.
  *
  * version 0.6.0
- * Rewrite of this driver: The Emulation of the rs232 protocoll
+ * Rewrite of this driver: The Emulation of the rs232 protocol
  * has been removed from the driver. A special executeCommand function
  * for this driver is included to gphoto.
  * The driver supports two kind of communication to bulk endpoints.
-- 
2.53.0

[PATCH v2 13/22] usb: isp1760: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/isp1760/isp1760-if.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/isp1760/isp1760-if.c b/drivers/usb/isp1760/isp1760-if.c
index a64190addba6..e09d509b4de0 100644
--- a/drivers/usb/isp1760/isp1760-if.c
+++ b/drivers/usb/isp1760/isp1760-if.c
@@ -94,7 +94,7 @@ static int isp1761_pci_init(struct pci_dev *dev)
 		return -ENOMEM;
 	}
 
-	/* Grab the PLX PCI mem maped port start address we need  */
+	/* Grab the PLX PCI mem mapped port start address we need  */
 	mem_start = pci_resource_start(dev, 0);
 	mem_length = pci_resource_len(dev, 0);
 
-- 
2.53.0

[PATCH v2 14/22] usb: misc: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/misc/emi26.c | 2 +-
 drivers/usb/misc/emi62.c | 2 +-
 drivers/usb/misc/ldusb.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 24d841850e05..a0fd80082043 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -198,7 +198,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 		goto wraperr;
 	msleep(250);	/* let device settle */
 
-	/* return 1 to fail the driver inialization
+	/* return 1 to fail the driver initialization
 	 * and give real driver change to load */
 	err = 1;
 
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 3eea60437f56..d29b5312f627 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -211,7 +211,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 
 	kfree(buf);
 
-	/* return 1 to fail the driver inialization
+	/* return 1 to fail the driver initialization
 	 * and give real driver change to load */
 	return 1;
 
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 71132a15e771..1072abab9659 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -2,7 +2,7 @@
 /*
  * Generic USB driver for report based interrupt in/out devices
  * like LD Didactic's USB devices. LD Didactic's USB devices are
- * HID devices which do not use HID report definitons (they use
+ * HID devices which do not use HID report definitions (they use
  * raw interrupt in and our reports only for communication).
  *
  * This driver uses a ring buffer for time critical reading of
-- 
2.53.0

[PATCH v2 15/22] usb: musb: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/musb/musb_host.c | 2 +-
 drivers/usb/musb/tusb6010.c  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 31b061248991..b8a502d2b08b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -65,7 +65,7 @@
  * (Yes, bulk _could_ use more of the endpoints than that, and would even
  * benefit from it.)
  *
- * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
+ * INTERRUPT and ISOCHRONOUS transfers are scheduled to the other endpoints.
  * So far that scheduling is both dumb and optimistic:  the endpoint will be
  * "claimed" until its software queue is no longer refilled.  No multiplexing
  * of transfers between endpoints, or anything clever.
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 1d9571f24a56..6a86bebc24ca 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -941,7 +941,7 @@ static void tusb_musb_enable(struct musb *musb)
 	musb_writel(tbase, TUSB_DMA_INT_MASK, 0x7fffffff);
 	musb_writel(tbase, TUSB_GPIO_INT_MASK, 0x1ff);
 
-	/* Clear all subsystem interrups */
+	/* Clear all subsystem interrupts */
 	musb_writel(tbase, TUSB_USBIP_INT_CLEAR, 0x7fffffff);
 	musb_writel(tbase, TUSB_DMA_INT_CLEAR, 0x7fffffff);
 	musb_writel(tbase, TUSB_GPIO_INT_CLEAR, 0x1ff);
-- 
2.53.0

[PATCH v2 16/22] usb: phy: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/phy/phy-fsl-usb.c | 2 +-
 drivers/usb/phy/phy.c         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 1986f7e9d9be..96f206351c3f 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -166,7 +166,7 @@ static void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 }
 
 /*
- * Pull-up D+, signalling connect by periperal. Also used in
+ * Pull-up D+, signalling connect by peripheral. Also used in
  * data-line pulsing in SRP
  */
 static void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c
index 5a9b9353f343..4cabb2cfbdf9 100644
--- a/drivers/usb/phy/phy.c
+++ b/drivers/usb/phy/phy.c
@@ -202,7 +202,7 @@ static void __usb_phy_get_charger_type(struct usb_phy *usb_phy)
  * @state: the cable state
  * @data: private data
  *
- * Determin the charger type from extcon subsystem which also means the
+ * Determine the charger type from extcon subsystem which also means the
  * charger state has been chaned, then we should notify this event.
  */
 static int usb_phy_get_charger_type(struct notifier_block *nb,
-- 
2.53.0

[PATCH v2 17/22] usb: renesas_usbhs: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/renesas_usbhs/mod_gadget.c | 2 +-
 drivers/usb/renesas_usbhs/mod_host.c   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 0c7fe109d5c7..92f4f35f8bb1 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -852,7 +852,7 @@ static int usbhsg_try_start(struct usbhs_priv *priv, u32 status)
 	usbhs_pipe_config_update(dcp->pipe, 0, 0, 64);
 
 	/*
-	 * system config enble
+	 * system config enable
 	 * - HI speed
 	 * - function
 	 * - usb module
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index f7ef3a9f82a4..1a35f54203c0 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1319,7 +1319,7 @@ static int usbhsh_irq_attch(struct usbhs_priv *priv,
 	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
 
 	/*
-	 * attch interrupt might happen infinitely on some device
+	 * attach interrupt might happen infinitely on some device
 	 * (on self power USB hub ?)
 	 * disable it here.
 	 *
@@ -1347,7 +1347,7 @@ static int usbhsh_irq_dtch(struct usbhs_priv *priv,
 	usbhsh_port_stat_set(hpriv, USB_PORT_STAT_C_CONNECTION << 16);
 
 	/*
-	 * enable attch interrupt again
+	 * enable attach interrupt again
 	 *
 	 * usbhsh_is_running() becomes invalid
 	 * according to this process.
@@ -1468,7 +1468,7 @@ static int usbhsh_start(struct usbhs_priv *priv)
 	usbhsh_pipe_init_for_host(priv);
 
 	/*
-	 * system config enble
+	 * system config enable
 	 * - HI speed
 	 * - host
 	 * - usb module
-- 
2.53.0

[PATCH v2 18/22] usb: roles: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/roles/class.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c
index edec139b68b5..8ea703e63ffb 100644
--- a/drivers/usb/roles/class.c
+++ b/drivers/usb/roles/class.c
@@ -414,7 +414,7 @@ usb_role_switch_register(struct device *parent,
 EXPORT_SYMBOL_GPL(usb_role_switch_register);
 
 /**
- * usb_role_switch_unregister - Unregsiter USB Role Switch
+ * usb_role_switch_unregister - Unregister USB Role Switch
  * @sw: USB Role Switch
  *
  * Unregister switch that was registered with usb_role_switch_register().
-- 
2.53.0

[PATCH v2 19/22] usb: serial: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/serial/cypress_m8.c | 2 +-
 drivers/usb/serial/f81534.c     | 8 ++++----
 drivers/usb/serial/mos7720.c    | 2 +-
 drivers/usb/serial/oti6858.c    | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 78fb1389b34c..bd9b68b691de 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -462,7 +462,7 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 	}
 
-	/* Skip reset for FRWD device. It is a workaound:
+	/* Skip reset for FRWD device. It is a workaround:
 	   device hangs if it receives SET_CONFIGURE in Configured
 	   state. */
 	if (!is_frwd(serial->dev))
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 0037767e4bbf..502c1c0260ec 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -83,7 +83,7 @@
 #define F81534_TOKEN_MSR_CHANGE		0x04
 
 /*
- * We used interal SPI bus to access FLASH section. We must wait the SPI bus to
+ * We used internal SPI bus to access FLASH section. We must wait the SPI bus to
  * idle if we performed any command.
  *
  * SPI Bus status register: F81534_BUS_REG_STATUS
@@ -755,7 +755,7 @@ static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
  * The F81532/534 will not report serial port to USB serial subsystem when
  * H/W DCD/DSR/CTS/RI/RX pin connected to ground.
  *
- * To detect RX pin status, we'll enable MCR interal loopback, disable it and
+ * To detect RX pin status, we'll enable MCR internal loopback, disable it and
  * delayed for 60ms. It connected to ground If LSR register report UART_LSR_BI.
  */
 static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
@@ -824,9 +824,9 @@ static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
  * f81534_calc_num_ports() will run to final we marked as "oldest version"
  * for this IC.
  *
- * 2rd is designed to more generic to use any transceiver and this is our
+ * 2nd is designed to more generic to use any transceiver and this is our
  * mass production type. We'll save data in F81534_CUSTOM_ADDRESS_START
- * (0x2f00) with 9bytes. The 1st byte is a indicater. If the token is
+ * (0x2f00) with 9bytes. The 1st byte is a indicator. If the token is
  * F81534_CUSTOM_VALID_TOKEN(0xf0), the IC is 2nd gen type, the following
  * 4bytes save port mode (0:RS232/1:RS485 Invert/2:RS485), and the last
  * 4bytes save GPIO state(value from 0~7 to represent 3 GPIO output pin).
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 104f43a8f4d8..312fa11cea95 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1208,7 +1208,7 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
 	/***********************************************
 	 *              Set for higher rates           *
 	 ***********************************************/
-	/* writing baud rate verbatum into uart clock field clearly not right */
+	/* writing baud rate verbatim into uart clock field clearly not right */
 	if (port_number == 0)
 		sp_reg = MOS7720_SP1_REG;
 	else
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index c6364e8ff71f..0e527fe56da0 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -13,7 +13,7 @@
  * Warning! You use this driver on your own risk! The only official
  * description of this device I have is datasheet from manufacturer,
  * and it doesn't contain almost any information needed to write a driver.
- * Almost all knowlegde used while writing this driver was gathered by:
+ * Almost all knowledge used while writing this driver was gathered by:
  *  - analyzing traffic between device and the M$ Windows 2000 driver,
  *  - trying different bit combinations and checking pin states
  *    with a voltmeter,
-- 
2.53.0

[PATCH v2 20/22] usb: storage: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/storage/ene_ub6250.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index a9358e04ab4b..18d85ee79db8 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -470,7 +470,7 @@ struct ene_ub6250_info {
 	u32		bl_num;
 	int		SrbStatus;
 
-	/*------Power Managerment ---------------*/
+	/*------Power Management ---------------*/
 	bool		Power_IsResum;
 };
 
-- 
2.53.0

[PATCH v2 21/22] usb: typec: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/typec/class.c            | 2 +-
 drivers/usb/typec/tcpm/tcpm.c        | 6 +++---
 drivers/usb/typec/tipd/core.c        | 2 +-
 drivers/usb/typec/ucsi/displayport.c | 2 +-
 drivers/usb/typec/ucsi/psy.c         | 2 +-
 drivers/usb/typec/ucsi/ucsi.h        | 2 +-
 6 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index 54c7810b563b..ea2564b9eff6 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -564,7 +564,7 @@ static const struct attribute_group *typec_altmode_groups[] = {
  * @adev: Handle to the alternate mode
  * @ops: Ops for the alternate mode
  *
- * After setting ops, attribute visiblity needs to be refreshed if the alternate
+ * After setting ops, attribute visibility needs to be refreshed if the alternate
  * mode can be activated.
  */
 void typec_altmode_set_ops(struct typec_altmode *adev,
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index d721baef5210..dabb91319e8a 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -2520,7 +2520,7 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev,
 			/*
 			 * PD2.0 Spec 6.10.3: respond with NAK as DFP (data host)
 			 * PD3.1 Spec 6.4.4.2.5.1: respond with NAK if "invalid field" or
-			 * "wrong configuation" or "Unrecognized"
+			 * "wrong configuration" or "Unrecognized"
 			 */
 			if ((port->data_role == TYPEC_DEVICE || svdm_version >= SVDM_VER_2_0) &&
 			    port->nr_snk_vdo) {
@@ -4461,7 +4461,7 @@ static int tcpm_pd_select_pdo(struct tcpm_port *port, int *sink_pdo,
 
 	/*
 	 * Select the source PDO providing the most power which has a
-	 * matchig sink cap.
+	 * matching sink cap.
 	 */
 	for (i = 0; i < port->nr_source_caps; i++) {
 		u32 pdo = port->source_caps[i];
@@ -5960,7 +5960,7 @@ static void run_state_machine(struct tcpm_port *port)
 			}
 			/*
 			 * Although tAvsSrcTransSmall is expected to be used
-			 * for voltage transistions smaller than 1V, using
+			 * for voltage transitions smaller than 1V, using
 			 * tAvsSrcTransLarge to be resilient against chargers
 			 * which strictly cannot honor tAvsSrcTransSmall to
 			 * improve interoperability.
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 02539378ffed..67471c363a68 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -950,7 +950,7 @@ static irqreturn_t cd321x_interrupt(int irq, void *data)
 		if (!tps->data->read_data_status(tps))
 			goto err_unlock;
 
-	/* Can be called uncondtionally since it will check for any changes itself */
+	/* Can be called unconditionally since it will check for any changes itself */
 	cd321x_connect(tps, status);
 
 err_unlock:
diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c
index 572da7bbd29c..56cf7deb2312 100644
--- a/drivers/usb/typec/ucsi/displayport.c
+++ b/drivers/usb/typec/ucsi/displayport.c
@@ -165,7 +165,7 @@ static int ucsi_displayport_status_update(struct ucsi_dp *dp)
 	dp->data.status = DP_STATUS_ENABLED;
 
 	/*
-	 * If pin assignement D is supported, claiming always
+	 * If pin assignment D is supported, claiming always
 	 * that Multi-function is preferred.
 	 */
 	if (DP_CAP_CAPABILITY(cap) & DP_CAP_UFP_D) {
diff --git a/drivers/usb/typec/ucsi/psy.c b/drivers/usb/typec/ucsi/psy.c
index c8ebab8ba7e7..8eb1ed42fbbd 100644
--- a/drivers/usb/typec/ucsi/psy.c
+++ b/drivers/usb/typec/ucsi/psy.c
@@ -255,7 +255,7 @@ static int ucsi_psy_get_charge_type(struct ucsi_connector *con, union power_supp
 		return 0;
 	}
 
-	/* The Battery Charging Cabability Status field is only valid in sink role. */
+	/* The Battery Charging Capability Status field is only valid in sink role. */
 	if (UCSI_CONSTAT(con, PWR_DIR) != TYPEC_SINK) {
 		val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
 		return 0;
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 1996f04ed5e6..d363e9a64763 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -509,7 +509,7 @@ struct ucsi {
 #define UCSI_NO_PARTNER_PDOS	BIT(0)	/* Don't read partner's PDOs */
 #define UCSI_DELAY_DEVICE_PDOS	BIT(1)	/* Reading PDOs fails until the parter is in PD mode */
 
-/* USB4 connection can imply that USB communcation is supported */
+/* USB4 connection can imply that USB communication is supported */
 #define UCSI_USB4_IMPLIES_USB	BIT(2)
 };
 
-- 
2.53.0

[PATCH v2 22/22] usb: usbip: fix a few spelling mistakes in comments

[Shunbo Shi]

No functional changes.

Signed-off-by: Shunbo Shi <shishunbo@cmss.chinamobile.com>
---
 drivers/usb/usbip/stub.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/usbip/stub.h b/drivers/usb/usbip/stub.h
index d11270560c24..1fea0190de7f 100644
--- a/drivers/usb/usbip/stub.h
+++ b/drivers/usb/usbip/stub.h
@@ -29,7 +29,7 @@ struct stub_device {
 	 * It is allocated as stub_priv_cache and assigned to urb->context.
 	 *
 	 * stub_priv is always linked to any one of 3 lists;
-	 *	priv_init: linked to this until the comletion of a urb.
+	 *	priv_init: linked to this until the completion of a urb.
 	 *	priv_tx  : linked to this after the completion of a urb.
 	 *	priv_free: linked to this after the sending of the result.
 	 *
-- 
2.53.0