[PATCH v12 00/23] Synopsys DisplayPort Controller improvements for Rockchip platforms

[PATCH v12 00/23] Synopsys DisplayPort Controller improvements for Rockchip platforms

[Sebastian Reichel]

This patch series updates the Synopsys Designware DisplayPort bridge
together with the only existing user: The Rockchip RK3576/RK3588:

 1. Follow-up bridges (PHY, USB-C connector)
    This is needed to get USB-C DP AltMode working; I've followed
    the Qualcomm driver as reference

 2. Runtime PM
    The initial driver has been upstreamed without RPM; add it to
    avoid wasting power when nothing is plugged

 3. Audio
    The initial driver has been upstreamed without audio support;
    this adds all missing bits for audio with single stream transport

There is a soft-dependency on these two USBDP series, which are needed
to get sensible USB-C DP AltMode on RK3588/RK3576:

 * https://lore.kernel.org/linux-phy/20261114-b4-rockchip-dwc3-rockchip-glue-v19-0-b79fb5f4b42a@collabora.com/
 * https://lore.kernel.org/linux-phy/20261114-b4-rockchip-usbdp-cleanup-part3-v17-0-1af5f566408e@collabora.com/

Boards using the DP controller for native DP connectors (or HDMI
bridges), currently directly link to the connector/hdmi bridge. These
are not affected by the USBDP changes and should keep working in any
case. The difference is, that with this series the DRM side is aware of
the link. I don't have any of those boards, so this code path is
untested. This becomes relevant for boards having on-board DP2HDMI
chips and exposing an HDMI connector as the port will be properly
named "card<number>-HDMI-A-<number>" when properly described.

I added a dedicated bridge callback for out-of-band hotplug events,
which is separate from the hotplug_notify. I have a feeling, that
there might be a better solution, but haven't found it. Please comment.

Changes in v12:
- Link to v11: https://patch.msgid.link/20260806-synopsys-dw-dp-improvements-v11-0-0d508505f383@collabora.com
- rebase to drm-misc-next (v7.4-rc2 based)
- Collect Reviewed-by/Acked-by from Andy Yan and Chaoyi Chen
- Collect Tested-by from Igor Paunovic
- Add new patch adding system PM support
- In patch adding runtime PM support - handle dw_dp_runtime_resume()
  error for the disabled runtime PM case (Sashiko)
- Hold audio lock in dw_dp_reset() to avoid ALSA race with controller
  reset (Sashiko)
- In Fix error handling for DP link enablement, avoid running
  drm_dp_link_power_down() when link is already down to avoid a
  stall (Sashiko)
- Do synchronized runtime PM put in bridge detach or attach error
  to ensure IRQ is balanced correctly during teardown (Sashiko)
- Add new patch to retrain when compositor kept output enabled, but
  display got replugged in between
- Move HPD enforcing debug message to generic bridge driver, to have
  them all in the same file and keeping the vendor specific glue as
  small as possible
- Ignored Sashiko complaining about sleeping in DRM atomic_enable,
  which is perfectly fine
- Ignored Sashiko complaining about dw_dp_hpd_work() being able to
  retrain link in parallel to dw_dp_link_disable from atomic_disable;
  this cannot run into SError. In worst case HPD is ignored when display
  is disabled at exactly the same time. It's not worth further
  increasing the size of this series for that.
- Ignored Sashiko's report, that a long_hpd IRQ might be overridden
  by a follow-up normal hpd. There is only so much we can do when
  IRQs are processed too slow. Caching interrupts for that reason
  makes no sense.
- Ignored Sashiko complaining about unchecked regmap_read, which
  cannot fail as it is for MMIO
- Ignored Sashiko's missing bandwidth check for explicitly negotiated
  downstream formats; pre-existing and unreachable with existing
  downstream bridges, which either use FIXED or return dw-dp's
  bandwidth-filtered format list

Changes in v11:
- Link to v10: https://patch.msgid.link/20260806-synopsys-dw-dp-improvements-v10-0-d84a26c303d6@collabora.com
- Move IRQ enablement slighty from before AUX bridge registration to directly
  afterwards in case there is a DP AUX related spurious interrupt
  (Sashiko)
- Cleanup SDP registers if there is an error in __dw_dp_audio_enable()
  (Sashiko)
- Clear XMIT_ENABLE in error handling of dw_dp_link_enable() (Sashiko)
- Move code to get next bridge to probe function, as it involves
  -EPROBE_DEFER; my previous change accidently broke modular build (Sashiko)

Changes in v10:
- Link to v9: https://patch.msgid.link/20260803-synopsys-dw-dp-improvements-v9-0-2e6e46135312@collabora.com
- Rework IRQ handling, so that the IRQ is enabled on bridge attach,
  dropping the patch introducing devm_work_autocancel() as that
  happens manually now during bridge detach (Sashiko)
- Update Fix error handling in dw_dp_link_enable(), so that it also
  ensures incorrect cleanup in dw_dp_link_disable(). While this kind
  of does two things now, it is one logical change and thus kept in
  one patch (Sashiko)
- Simplify IRQ handling in runtime PM patch and fix bisectability
  issue with runtime PM patch for generic bridge code applied, but
  runtime PM patch for Rockchip not yet applied
- Use 64 bit variables for matching the controller addresses, which
  is cleaner and future proof (Sashiko)
- Move all of the code previous patch versions added to dw_dp_bind
  and dw_dp_unbind to the bridge_attach/detach callbacks instead,
  which keeps dw_dp_bind nice and clean. It means that everything
  is properly initialized once the bridge has been attached.
- v9 got a Tested-by from Igor Paunovic <royalnet026@gmail.com>
  for RK3588 based Orange Pi 5 Plus (USB-C DP AltMode). I'm not
  carrying this over as quite a few patches changed due to the
  latest Sashiko feedback, even though I don't expect any
  regressions.

Changes in v9:
- Link to v8: https://patch.msgid.link/20260731-synopsys-dw-dp-improvements-v8-0-ac1e6a75782f@collabora.com
- Add yet another patch, which fixes missing resorce cleanups when
  dw_dp_link_enable() runs into errors (Sashiko)
- Acquire audio_lock guard in dw_dp_audio_mute_stream (Sashiko)
- Ensure dp->bridge.dev is set in dw_dp_hpd_work (Sashiko)
- Error out if hardware returns more bytes then requested by
  DP AUX transfer (Sashiko)
- The other Sashiko problems reported on v8 are false positives
  as far as I can tell

Changes in v8:
- Link to v7: https://patch.msgid.link/20260728-synopsys-dw-dp-improvements-v7-0-b7640fa8cf48@collabora.com
- Add new patch moving DP AUX bridge registration into
  bridge_attach/detach callbacks, which simplifies cleanup and ensures
  it is (un)registered at the right point in time (Sashiko)
- Update Fix incorrect resource lifetimes in bind callback patch to
  ensure at the end of the probe, the device is fully functional,
  also only register the bridge once all necessary bits are available
  as it is in theory reachable at this point (Sashiko)
- Update the patch cancelling HPD worker to simply use
  devm_work_autocancel() as a result of this rework
- Add a new patch describing why the reset line state is not explicitly
  changed (Sashiko)
- Merge the two patches for the AUX transfer timeout handling to avoid a
  temporary race condition and synchronize IRQs after the reset to fix
  yet another race condition (Sashiko)
- Add a new patch to properly support short I2C reads (Sashiko)
- Rework Runtime PM handling again, so that the OOB handling is done
  before the 100ms sleep. Also ensure it is enabled at the right point
  in time after the cleanup changes. (Sashiko)
- Add new patch to drop useless reservation for SDP slot 0, which
  fix a race condition (Sashiko)
- Also restore audio mute status when audio functionality is restored
  after atomic disable/enable cycle (Sashiko)
- Setup SDP audio frame channel_allocation according to information
  received from ALSA (Sashko)
- Sashiko feedback ignored by me and that may or may not appear again
  in this version as Sashiko does not seem to properly take the whole
  series into account and thus probably ignores the changelog
  * A divide-by-zero vulnerability exists in dw_dp_video_enable when
    processing a display mode with a clock value of 1; I believe this
    clock cannot drive a real mode
  * I2C-over-AUX reply status (NACK/DEFER) is silently discarded,
    causing deferred I2C transactions to falsely succeed and return
    garbage data; this is a false positive. It seems Sashiko got
    confused by the bit patterns. Nothing is discarded.
  * Potential Use-After-Free of the connector and encoder due to missing
    DRM device reference in OOB hotplug event handling; Sashiko
    missed that drm_for_each_bridge_in_chain() is now the renamed
    drm_for_each_bridge_in_chain_scoped().
  * Missing runtime PM acquisition in out-of-band HPD callbacks leads to
    SError crashes once runtime PM is enabled; Sashiko failed to
    notice that Runtime PM is only introduced in a later patch
  * Calling a sleeping function (msleep) from a runtime PM resume
    callback that is reachable from an atomic commit path; Sashiko
    failed to understand that atomic DRM functions may sleep
  * Missing system sleep callbacks prevent the device and its power
    domain from suspending during system sleep for native DP
    configurations; this needs separate investigation considering
    system sleep is broken on recent Rockchip platforms (same error
    appears a few times)
  * There is a bunch of pre-existing issues that are fixed later
    in the series

Changes in v7:
- Link to v6: https://lore.kernel.org/r/20260724-synopsys-dw-dp-improvements-v6-0-041d99a19c4e@collabora.com
- Move drm_bridge_add() to probe and only attach it in the bind
  function, as the object is re-used and not fully cleared by
  drm_bridge_remove (Sashiko)
- Add a new patch resetting the DP AUX sub-controller on message
  timeout to have decent error recovery (Sashiko)
- Fix dp_dp_rockchip_get_vo_grf -> dw_dp_rockchip_get_vo_grf (Sashiko)
- Introduce pm_active in the PM runtime patch, to early exit
  on atomic_disable when atomic_enable failed to get runtime
  PM enabled (Sashiko)
- Introduce drm_bound in the PM runtime patch, which is (un)set
  when the driver is bound to a DRM encoder and used to enable
  IRQ enabling in the runtime PM handlers. This in turn protects
  the system of potential spurious interrupts. (Sashiko)
- In the audio patch, fix support for hotplug with a running
  audio stream. (Sashiko)
- To avoid further blowing up the series, I've decided not to
  act on these "pre-existing" issues reported by Sashiko. I
  think it makes sense to handle them separately:
    * Short HPD and Long HPD events share a single boolean state
      variable, causing critical hot plug events to be lost if
      interrupts arrive in quick succession.
    * DP AUX lifetime complains (registered too early / unregistered
      too late); reported multiple times
    * The driver fails to support DP AUX short reads, incorrectly
      rejecting them with -EBUSY instead of returning the number
      of bytes successfully transferred, which breaks I2C-over-AUX.
- Collected Reviewed-by from Krzysztof Kozlowski on the
  DT binding patch

Changes in v6:
- Link to v5: https://lore.kernel.org/r/20260724-synopsys-dw-dp-improvements-v5-0-9445c2e87441@collabora.com
- Fix overlong commit message in mutex patch
- Update MEDIA_BUS_FMT_FIXED patch, to use input format as output format
  when output format is MEDIA_BUS_FMT_FIXED (Sashiko)
- Drop patch moving dw_dp_bridge_atomic_get_output_bus_fmts (no longer
  needed)
- Reword the comment about platforms other than RK3576 and RK3588
  shouldn't get the VO GRF from the USBDP to make it more obvious
  that no such platform exist at the moment and thus the alternative
  path will not be implemented at this point in time (Sashiko)
- Update the runtime PM code to have much better error handling
  as well as support for platforms not using runtime PM (Sashiko)
- Update the runtime PM code to keep the device suspended when
  probed, but unbound as a nice side effect
- Fix error handling for dw_dp_audio_infoframe_send() in audio
  patch (Sashiko)
- Fix typo in sample width check in audio patch (Sashiko)
- Improve cleanup of SDP in audio patch (Sashiko)

Changes in v5:
- Link to v4: https://lore.kernel.org/r/20260721-synopsys-dw-dp-improvements-v4-0-f0f4a4ede712@collabora.com
- Add new patch to cancel pending HPD work on unbind (Sashiko)
- Add new patch to add missing mutex cleanups on module removal (Sashiko)
- Add new patch moving dw_dp_bridge_atomic_get_output_bus_fmts
- Update MEDIA_BUS_FMT_FIXED patch to avoid fixed RGB888 format
  and instead use whatever works for the negotiated bandwidth (Sashiko)
- Add more error checking for runtime PM patches (Sashiko)
- Ensure runtime PM is held in interrupt handler (Sashiko)
- Fix usbc_mode logic inversion for runtime PM in unbind (Sashiko)
- Move sleep for HPD_HOT_PLUG from hotplug handler to runtime
  resume function; no need to sleep when runtime PM is kept
  active and runtime PM resume is a slow operation anyways. (Sashiko)
- Add new patch to protect sdp_reg_bank from concurrent access (Sashiko)
- Add new patch to use regmap_set_bits in dw_dp_send_sdp()
- Update DT binding patch to be all about the selected solution and
  mention the ABI break
- Clear SDP in the audio patch on unprepare (Sashiko)
- Add a comment, that only 1,2 or 8 channels are supported (Sashiko)
- Error out on unsupported sample_width (Sashiko)
- Fix missing error check for clock enable (Sashiko)

Changes in PATCHv4:
 - Link to v3: https://lore.kernel.org/all/20260612-synopsys-dw-dp-improvements-v3-0-dc61e6352508@collabora.com/
 - Drop "Simplify driver data setting" (effectively reverted later on)
 - Add "Fix incorrect resource lifetimes in bind callback", which
   affects all following patches quite a bit (Sashiko)
 - Update "Add follow-up bridge support" to mention that fatal errors
   are fine (Sashiko)
 - Update "Add out-of-band HPD notify handler" to use
   drm_for_each_bridge_in_chain() instead of
   drm_for_each_bridge_in_chain_scoped() required after rebase to
   latest drm-misc-next
 - Add 100ms sleep in hpd detect functions after runtime resume in the
   "Add Runtime PM support" patch (Andy Yan)
 - Keep runtime PM enabled if DP is used without USB-C to avoid missing
   HPD signals in "Add Runtime PM support" patch (Andy Yan)
 - Update patch description of DT binding patch and drop RFC tag
 - Use pm_runtime_resume_and_get() in the audio startup function, which
   allows easy error handling (Sashiko)
 - Avoid updating audio_interface in the audio prepare function when
   an error related early exit happens (Sashiko)
 - Add error handling for clock prepare calls in audio prepare function
   (Sashiko)

Changes in PATCHv3:
- Link to v2: https://lore.kernel.org/r/20260501-synopsys-dw-dp-improvements-v2-0-d7e7f6bac77f@collabora.com
- Collect Reviewed-by on "Simplify driver data setting" patch (Andy Yan)
- Use of_drm_get_bridge_by_endpoint instead of devm_drm_of_get_bridge (Luca Ceresoli)
- Use FIELD_PREP_WM16 instead of FIELD_PREP_WM16_CONST (Chaoyi Chen)
- Rebase to latest drm-misc-next (Dropped Cristian's patches)

Changes in PATCHv2:
 * Link to v1: https://lore.kernel.org/r/20260326-synopsys-dw-dp-improvements-v1-0-501849162290@collabora.com
 * rebased to latest drm-misc-next
 * prepended the Patches from Cristian's cleanup series, as they also
   needed a rebase and should be merged first
   https://lore.kernel.org/dri-devel/20260327-drm-rk-fixes-v3-0-fd2e6900c08c@collabora.com/
 * fix issue with the audio stream (un)prepare handling in last patch

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Sebastian Reichel (22):
      drm/bridge: synopsys: dw-dp: Register DP AUX on bridge attach
      drm/bridge: synopsys: dw-dp: Fix incorrect resource lifetimes in bind callback
      drm/bridge: synopsys: dw-dp: Fix error handling for DP link enablement
      drm/bridge: synopsys: dw-dp: Document missing reset line deassert
      drm/bridge: synopsys: dw-dp: Add missing mutex cleanups on module removal
      drm/bridge: synopsys: dw-dp: Fix AUX transfer timeout race condition
      drm/bridge: synopsys: dw-dp: Fix support for short I2C reads
      drm/bridge: synopsys: dw-dp: Free output_fmts when none are valid
      drm/bridge: synopsys: dw-dp: Support MEDIA_BUS_FMT_FIXED
      drm/bridge: synopsys: dw-dp: Add follow-up bridge support
      drm/bridge: Add out-of-band HPD notify handler
      drm/bridge: synopsys: dw-dp: Support software triggered OOB HPD
      drm/rockchip: dw_dp: Implement out-of-band HPD handling
      drm/bridge: synopsys: dw-dp: Add Runtime PM support
      drm/rockchip: dw_dp: Add runtime PM support
      drm/rockchip: dw_dp: Add system PM support
      drm/bridge: synopsys: dw-dp: Protect sdp_reg_bank from concurrent access
      drm/bridge: synopsys: dw-dp: Drop useless reservation of first slot
      drm/bridge: synopsys: dw-dp: Clear only enabled SDPs on atomic disable
      drm/bridge: synopsys: dw-dp: Use regmap_set_bits in dw_dp_send_sdp
      dt-bindings: display: rockchip: dw-dp: Fix sound DAI cells
      drm/bridge: synopsys: dw-dp: Add audio support

Yury Smirnov (1):
      drm/bridge: synopsys: dw-dp: Retrain on hotplug with pre-enabled link

 .../bindings/display/rockchip/rockchip,dw-dp.yaml  |   9 +-
 drivers/gpu/drm/bridge/synopsys/dw-dp.c            | 801 +++++++++++++++++++--
 drivers/gpu/drm/display/drm_bridge_connector.c     |   6 +
 drivers/gpu/drm/rockchip/dw_dp-rockchip.c          | 189 ++++-
 include/drm/bridge/dw_dp.h                         |  13 +-
 include/drm/drm_bridge.h                           |  14 +
 6 files changed, 925 insertions(+), 107 deletions(-)
---
base-commit: fc72cd52fb284f3707fa36a68ea5a22543a51d71
change-id: 20260325-synopsys-dw-dp-improvements-7da2e98df1dd

Best regards,
--  
Sebastian Reichel <sebastian.reichel@collabora.com>

[PATCH v12 01/23] drm/bridge: synopsys: dw-dp: Register DP AUX on bridge attach

[Sebastian Reichel]

Unregister the DP AUX device at the right spot as documented in the
drm_dp_aux_register() function description. This helps that it is
only accessed when the DRM device is ready and the bridge is powered
and initialized (further fixes are required for that).

Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 55 +++++++++++++++++++++------------
 1 file changed, 35 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index cc613c7ee28d..0a34d6a6ace4 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1813,7 +1813,36 @@ static struct drm_bridge_state *dw_dp_bridge_atomic_duplicate_state(struct drm_b
 	return &state->base;
 }
 
+static int dw_dp_bridge_attach(struct drm_bridge *bridge,
+			       struct drm_encoder *encoder,
+			       enum drm_bridge_attach_flags flags)
+{
+	struct dw_dp *dp = bridge_to_dp(bridge);
+	struct device *dev = dp->dev;
+	int ret;
+
+	dp->aux.dev = dev;
+	dp->aux.drm_dev = encoder->dev;
+	dp->aux.name = dev_name(dev);
+	dp->aux.transfer = dw_dp_aux_transfer;
+
+	ret = drm_dp_aux_register(&dp->aux);
+	if (ret)
+		dev_err(dev, "Aux register failed: %d\n", ret);
+
+	return ret;
+}
+
+static void dw_dp_bridge_detach(struct drm_bridge *bridge)
+{
+	struct dw_dp *dp = bridge_to_dp(bridge);
+
+	drm_dp_aux_unregister(&dp->aux);
+}
+
 static const struct drm_bridge_funcs dw_dp_bridge_funcs = {
+	.attach = dw_dp_bridge_attach,
+	.detach = dw_dp_bridge_detach,
 	.atomic_duplicate_state = dw_dp_bridge_atomic_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
 	.atomic_create_state = drm_atomic_helper_bridge_create_state,
@@ -2043,20 +2072,10 @@ struct dw_dp *dw_dp_bind(struct device *dev, struct drm_encoder *encoder,
 	if (ret)
 		return ERR_PTR(ret);
 
-	dp->aux.dev = dev;
-	dp->aux.drm_dev = encoder->dev;
-	dp->aux.name = dev_name(dev);
-	dp->aux.transfer = dw_dp_aux_transfer;
-	ret = drm_dp_aux_register(&dp->aux);
-	if (ret) {
-		dev_err_probe(dev, ret, "Aux register failed\n");
-		return ERR_PTR(ret);
-	}
-
 	ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 	if (ret) {
 		dev_err_probe(dev, ret, "Failed to attach bridge\n");
-		goto unregister_aux;
+		return ERR_PTR(ret);
 	}
 
 	dw_dp_init_hw(dp);
@@ -2064,35 +2083,31 @@ struct dw_dp *dw_dp_bind(struct device *dev, struct drm_encoder *encoder,
 	ret = phy_init(dp->phy);
 	if (ret) {
 		dev_err_probe(dev, ret, "phy init failed\n");
-		goto unregister_aux;
+		return ERR_PTR(ret);
 	}
 
 	ret = devm_add_action_or_reset(dev, dw_dp_phy_exit, dp);
 	if (ret)
-		goto unregister_aux;
+		return ERR_PTR(ret);
 
 	dp->irq = platform_get_irq(pdev, 0);
 	if (dp->irq < 0) {
 		ret = dp->irq;
-		goto unregister_aux;
+		return ERR_PTR(ret);
 	}
 
 	ret = devm_request_threaded_irq(dev, dp->irq, NULL, dw_dp_irq,
 					IRQF_ONESHOT, dev_name(dev), dp);
 	if (ret)
-		goto unregister_aux;
+		return ERR_PTR(ret);
 
 	return dp;
-
-unregister_aux:
-	drm_dp_aux_unregister(&dp->aux);
-	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(dw_dp_bind);
 
 void dw_dp_unbind(struct dw_dp *dp)
 {
-	drm_dp_aux_unregister(&dp->aux);
+	/* nothing to do */
 }
 EXPORT_SYMBOL_GPL(dw_dp_unbind);
 

-- 
2.53.0

[PATCH v12 02/23] drm/bridge: synopsys: dw-dp: Fix incorrect resource lifetimes in bind callback

[Sebastian Reichel]

Currently the Synopsys DesignWare DP controller driver's bind function
requests lots of resources using device managed functions. These are
free'd on driver removal instead of at unbind time. Fix this discrepancy
by introducing a new probe helper function and moving over the whole
bind function. This results in a fully functional DRM bridge once probe
succeeded. The only thing still happening when the component is bound
is the bridge attachment, which requires the encoder.

The interrupt is kept disabled while the bridge is detached to ensure no
spurious interrupts can arrive as the interrupt handler triggers a
worker, which accesses the DRM device.

Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c   | 69 ++++++++++++++++---------------
 drivers/gpu/drm/rockchip/dw_dp-rockchip.c | 53 ++++++++++++++----------
 include/drm/bridge/dw_dp.h                |  5 ++-
 3 files changed, 70 insertions(+), 57 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 0a34d6a6ace4..ac16d290d49b 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1827,16 +1827,22 @@ static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 	dp->aux.transfer = dw_dp_aux_transfer;
 
 	ret = drm_dp_aux_register(&dp->aux);
-	if (ret)
+	if (ret) {
 		dev_err(dev, "Aux register failed: %d\n", ret);
+		return ret;
+	}
 
-	return ret;
+	enable_irq(dp->irq);
+
+	return 0;
 }
 
 static void dw_dp_bridge_detach(struct drm_bridge *bridge)
 {
 	struct dw_dp *dp = bridge_to_dp(bridge);
 
+	disable_irq(dp->irq);
+	cancel_work_sync(&dp->hpd_work);
 	drm_dp_aux_unregister(&dp->aux);
 }
 
@@ -1982,6 +1988,18 @@ static const struct regmap_config dw_dp_regmap_config = {
 	.rd_table = &dw_dp_readable_table,
 };
 
+int dw_dp_bind(struct dw_dp *dp, struct drm_encoder *encoder)
+{
+	return drm_bridge_attach(encoder, &dp->bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+}
+EXPORT_SYMBOL_GPL(dw_dp_bind);
+
+void dw_dp_unbind(struct dw_dp *dp)
+{
+	/* nothing to do as bridge is detached automatically */
+}
+EXPORT_SYMBOL_GPL(dw_dp_unbind);
+
 static void dw_dp_phy_exit(void *data)
 {
 	struct dw_dp *dp = data;
@@ -1989,13 +2007,12 @@ static void dw_dp_phy_exit(void *data)
 	phy_exit(dp->phy);
 }
 
-struct dw_dp *dw_dp_bind(struct device *dev, struct drm_encoder *encoder,
-			 const struct dw_dp_plat_data *plat_data)
+struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_data *plat_data)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct dw_dp *dp;
+	struct device *dev = &pdev->dev;
 	struct drm_bridge *bridge;
 	void __iomem *res;
+	struct dw_dp *dp;
 	int ret;
 
 	dp = devm_drm_bridge_alloc(dev, struct dw_dp, bridge, &dw_dp_bridge_funcs);
@@ -2004,9 +2021,8 @@ struct dw_dp *dw_dp_bind(struct device *dev, struct drm_encoder *encoder,
 
 	dp->dev = dev;
 	dp->pixel_mode = plat_data->pixel_mode;
-
 	dp->plat_data.max_link_rate = plat_data->max_link_rate;
-	bridge = &dp->bridge;
+
 	mutex_init(&dp->irq_lock);
 	INIT_WORK(&dp->hpd_work, dw_dp_hpd_work);
 	init_completion(&dp->complete);
@@ -2063,21 +2079,15 @@ struct dw_dp *dw_dp_bind(struct device *dev, struct drm_encoder *encoder,
 		return ERR_CAST(dp->rstc);
 	}
 
-	bridge->of_node = dev->of_node;
-	bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
-	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
-	bridge->ycbcr_420_allowed = true;
+	dp->irq = platform_get_irq(pdev, 0);
+	if (dp->irq < 0)
+		return ERR_PTR(dp->irq);
 
-	ret = devm_drm_bridge_add(dev, bridge);
+	ret = devm_request_threaded_irq(dev, dp->irq, NULL, dw_dp_irq,
+					IRQF_ONESHOT | IRQF_NO_AUTOEN, dev_name(dev), dp);
 	if (ret)
 		return ERR_PTR(ret);
 
-	ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
-	if (ret) {
-		dev_err_probe(dev, ret, "Failed to attach bridge\n");
-		return ERR_PTR(ret);
-	}
-
 	dw_dp_init_hw(dp);
 
 	ret = phy_init(dp->phy);
@@ -2090,26 +2100,19 @@ struct dw_dp *dw_dp_bind(struct device *dev, struct drm_encoder *encoder,
 	if (ret)
 		return ERR_PTR(ret);
 
-	dp->irq = platform_get_irq(pdev, 0);
-	if (dp->irq < 0) {
-		ret = dp->irq;
-		return ERR_PTR(ret);
-	}
+	bridge = &dp->bridge;
+	bridge->of_node = dev->of_node;
+	bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
+	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
+	bridge->ycbcr_420_allowed = true;
 
-	ret = devm_request_threaded_irq(dev, dp->irq, NULL, dw_dp_irq,
-					IRQF_ONESHOT, dev_name(dev), dp);
+	ret = devm_drm_bridge_add(dev, bridge);
 	if (ret)
 		return ERR_PTR(ret);
 
 	return dp;
 }
-EXPORT_SYMBOL_GPL(dw_dp_bind);
-
-void dw_dp_unbind(struct dw_dp *dp)
-{
-	/* nothing to do */
-}
-EXPORT_SYMBOL_GPL(dw_dp_unbind);
+EXPORT_SYMBOL_GPL(dw_dp_probe);
 
 MODULE_AUTHOR("Andy Yan <andyshrk@163.com>");
 MODULE_DESCRIPTION("DW DP Core Library");
diff --git a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
index b23efb153c9e..38e8fe75718e 100644
--- a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
@@ -26,7 +26,7 @@
 struct rockchip_dw_dp {
 	struct dw_dp *base;
 	struct device *dev;
-	struct rockchip_encoder encoder;
+	struct rockchip_encoder *encoder;
 };
 
 static int dw_dp_encoder_atomic_check(struct drm_encoder *encoder,
@@ -73,37 +73,28 @@ static const struct drm_encoder_helper_funcs dw_dp_encoder_helper_funcs = {
 
 static int dw_dp_rockchip_bind(struct device *dev, struct device *master, void *data)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	const struct dw_dp_plat_data *plat_data;
+	struct rockchip_dw_dp *dp = dev_get_drvdata(dev);
 	struct drm_device *drm_dev = data;
-	struct rockchip_dw_dp *dp;
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
 	int ret;
 
-	dp = drmm_kzalloc(drm_dev, sizeof(*dp), GFP_KERNEL);
-	if (!dp)
+	dp->encoder = drmm_kzalloc(drm_dev, sizeof(*dp->encoder), GFP_KERNEL);
+	if (!dp->encoder)
 		return -ENOMEM;
 
-	dp->dev = dev;
-	platform_set_drvdata(pdev, dp);
-
-	plat_data = of_device_get_match_data(dev);
-	if (!plat_data)
-		return -ENODEV;
-
-	encoder = &dp->encoder.encoder;
+	encoder = &dp->encoder->encoder;
 	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev, dev->of_node);
-	rockchip_drm_encoder_set_crtc_endpoint_id(&dp->encoder, dev->of_node, 0, 0);
+	rockchip_drm_encoder_set_crtc_endpoint_id(dp->encoder, dev->of_node, 0, 0);
 
 	ret = drmm_encoder_init(drm_dev, encoder, NULL, DRM_MODE_ENCODER_TMDS, NULL);
 	if (ret)
 		return ret;
 	drm_encoder_helper_add(encoder, &dw_dp_encoder_helper_funcs);
 
-	dp->base = dw_dp_bind(dev, encoder, plat_data);
-	if (IS_ERR(dp->base))
-		return PTR_ERR(dp->base);
+	ret = dw_dp_bind(dp->base, encoder);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to bind DW-DP bridge\n");
 
 	connector = drm_bridge_connector_init(drm_dev, encoder);
 	if (IS_ERR(connector)) {
@@ -128,12 +119,30 @@ static const struct component_ops dw_dp_rockchip_component_ops = {
 	.unbind = dw_dp_rockchip_unbind,
 };
 
-static int dw_dp_probe(struct platform_device *pdev)
+static int dw_dp_rockchip_probe(struct platform_device *pdev)
 {
+	const struct dw_dp_plat_data *plat_data;
+	struct device *dev = &pdev->dev;
+	struct rockchip_dw_dp *dp;
+
+	plat_data = of_device_get_match_data(dev);
+	if (!plat_data)
+		return -ENODEV;
+
+	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
+	if (!dp)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, dp);
+	dp->dev = dev;
+
+	dp->base = dw_dp_probe(pdev, plat_data);
+	if (IS_ERR(dp->base))
+		return PTR_ERR(dp->base);
+
 	return component_add(&pdev->dev, &dw_dp_rockchip_component_ops);
 }
 
-static void dw_dp_remove(struct platform_device *pdev)
+static void dw_dp_rockchip_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &dw_dp_rockchip_component_ops);
 }
@@ -161,8 +170,8 @@ static const struct of_device_id dw_dp_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw_dp_of_match);
 
 struct platform_driver dw_dp_driver = {
-	.probe	= dw_dp_probe,
-	.remove = dw_dp_remove,
+	.probe	= dw_dp_rockchip_probe,
+	.remove = dw_dp_rockchip_remove,
 	.driver = {
 		.name = "dw-dp",
 		.of_match_table = dw_dp_of_match,
diff --git a/include/drm/bridge/dw_dp.h b/include/drm/bridge/dw_dp.h
index 22105c3e8e4d..a82412a9e769 100644
--- a/include/drm/bridge/dw_dp.h
+++ b/include/drm/bridge/dw_dp.h
@@ -22,7 +22,8 @@ struct dw_dp_plat_data {
 	u8 pixel_mode;
 };
 
-struct dw_dp *dw_dp_bind(struct device *dev, struct drm_encoder *encoder,
-			 const struct dw_dp_plat_data *plat_data);
+int dw_dp_bind(struct dw_dp *dp, struct drm_encoder *encoder);
 void dw_dp_unbind(struct dw_dp *dp);
+
+struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_data *plat_data);
 #endif /* __DW_DP__ */

-- 
2.53.0

[PATCH v12 03/23] drm/bridge: synopsys: dw-dp: Fix error handling for DP link enablement

[Sebastian Reichel]

dw_dp_link_disable() may be called in atomic mode disable even when
dw_dp_link_enable() (or an earlier step) failed during atomic mode
enable as there is no error tracking. This would result in broken PHY
power state.

This is fixed by introducing a new enabled state in the link structure
to ensure the link disabling only happens if it has been properly
enabled in the first place.

The patch also adds missing error handling in dw_dp_link_enable()
itself to ensure the link enablement becomes an atomic operation.

Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index ac16d290d49b..93d52a76044f 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -279,6 +279,7 @@ struct dw_dp_link {
 	unsigned char revision;
 	unsigned int rate;
 	unsigned int lanes;
+	bool enabled;
 	u8 sink_count;
 	u8 vsc_sdp_supported;
 	struct dw_dp_link_caps caps;
@@ -1614,6 +1615,9 @@ static void dw_dp_link_disable(struct dw_dp *dp)
 {
 	struct dw_dp_link *link = &dp->link;
 
+	if (!link->enabled)
+		return;
+
 	if (dw_dp_hpd_detect(dp))
 		drm_dp_link_power_down(&dp->aux, dp->link.revision);
 
@@ -1623,6 +1627,7 @@ static void dw_dp_link_disable(struct dw_dp *dp)
 
 	link->train.clock_recovered = false;
 	link->train.channel_equalized = false;
+	link->enabled = false;
 }
 
 static int dw_dp_link_enable(struct dw_dp *dp)
@@ -1635,10 +1640,23 @@ static int dw_dp_link_enable(struct dw_dp *dp)
 
 	ret = drm_dp_link_power_up(&dp->aux, dp->link.revision);
 	if (ret < 0)
-		return ret;
+		goto err_phy_power_off;
 
 	ret = dw_dp_link_train(dp);
+	if (ret < 0)
+		goto err_link_power_down;
+
+	dp->link.enabled = true;
+
+	return 0;
+
+err_link_power_down:
+	if (dw_dp_hpd_detect(dp))
+		drm_dp_link_power_down(&dp->aux, dp->link.revision);
+	dw_dp_phy_xmit_enable(dp, 0);
 
+err_phy_power_off:
+	phy_power_off(dp->phy);
 	return ret;
 }
 

-- 
2.53.0

[PATCH v12 04/23] drm/bridge: synopsys: dw-dp: Document missing reset line deassert

[Sebastian Reichel]

If the driver uses devm_reset_control_get_exclusive_deasserted() instead
of devm_reset_control_get() and thus automatically deasserts during
probe, the SoC will hang when the device is unbound.

This does not happen, when runtime PM is being used (not yet supported
in mainline), which suggests the power-domain involved requires this reset
line to be deasserted.

Even with runtime PM there is no guarantee that the power-domain is
disabled as it is shared. Considering the power-domain does not have
the reset dependency described in DT, document the problem but leave
things in the current state until a better solution is found as the
reset line is deasserted by default on all supported platforms.

Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 93d52a76044f..9677f789c986 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -2091,6 +2091,10 @@ struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_
 		return ERR_CAST(dp->hdcp_clk);
 	}
 
+	/*
+	 * This reset line is deasserted by default; asserting it hangs the SoC if the
+	 * related power-domain is still active.
+	 */
 	dp->rstc = devm_reset_control_get(dev, NULL);
 	if (IS_ERR(dp->rstc)) {
 		dev_err_probe(dev, PTR_ERR(dp->rstc), "failed to get reset control\n");

-- 
2.53.0

[PATCH v12 05/23] drm/bridge: synopsys: dw-dp: Add missing mutex cleanups on module removal

[Sebastian Reichel]

The driver is currently missing to fully clean up after itself. Ensure
that the mutex is cleaned up.

Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 9677f789c986..7351b70bdac9 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -2041,10 +2041,13 @@ struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_
 	dp->pixel_mode = plat_data->pixel_mode;
 	dp->plat_data.max_link_rate = plat_data->max_link_rate;
 
-	mutex_init(&dp->irq_lock);
 	INIT_WORK(&dp->hpd_work, dw_dp_hpd_work);
 	init_completion(&dp->complete);
 
+	ret = devm_mutex_init(dev, &dp->irq_lock);
+	if (ret)
+		return ERR_PTR(ret);
+
 	res = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(res))
 		return ERR_CAST(res);

-- 
2.53.0

[PATCH v12 06/23] drm/bridge: synopsys: dw-dp: Fix AUX transfer timeout race condition

[Sebastian Reichel]

The DP AUX transfer method uses a completion triggered by an interrupt,
which can timeout. If the function runs into the timeout and the
interrupt fires afterwards, the following DP aux transfer completion
would trigger immediately without waiting for the interrupt. This in
turn means the next one would also be broken and so on.

Fix this potential issue by re-initializing the completion directly
before sending the AUX command.

As this is racy (the interrupt might arrive between the completion
re-init and the new command being programmed), also reset the AUX
controller on timeouts and synchronize pending interrupts to guarantee
that there are no pending AUX transfers when the dw_dp_aux_transfer()
returns.

Due to lack of a sink, which generates AUX timeouts, this change is
effectively untested.

Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 7351b70bdac9..df0b98cbbaab 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1465,6 +1465,8 @@ static ssize_t dw_dp_aux_transfer(struct drm_dp_aux *aux,
 	if (WARN_ON(msg->size > 16))
 		return -E2BIG;
 
+	reinit_completion(&dp->complete);
+
 	switch (msg->request & ~DP_AUX_I2C_MOT) {
 	case DP_AUX_NATIVE_WRITE:
 	case DP_AUX_I2C_WRITE:
@@ -1491,6 +1493,12 @@ static ssize_t dw_dp_aux_transfer(struct drm_dp_aux *aux,
 	status = wait_for_completion_timeout(&dp->complete, timeout);
 	if (!status) {
 		dev_err(dp->dev, "timeout waiting for AUX reply\n");
+		regmap_update_bits(dp->regmap, DW_DP_SOFT_RESET_CTRL,
+				   AUX_RESET, FIELD_PREP(AUX_RESET, 1));
+		usleep_range(10, 20);
+		regmap_update_bits(dp->regmap, DW_DP_SOFT_RESET_CTRL,
+				   AUX_RESET, FIELD_PREP(AUX_RESET, 0));
+		synchronize_irq(dp->irq);
 		return -ETIMEDOUT;
 	}
 

-- 
2.53.0

[PATCH v12 07/23] drm/bridge: synopsys: dw-dp: Fix support for short I2C reads

[Sebastian Reichel]

The transfer functions returns the amount of bytes read for
DP_AUX_I2C_READ. By returning -EBUSY for short reads, the caller has
less information available what is going wrong and possibly simply
resends the read request. On sinks not supporting long reads, this will
simply run into the same issue again.

Instead it makes more sense to return the data from the short read with
the length information, which allows drm_dp_i2c_do_msg() to read data in
smaller chunks and succeed in the end.

Due to lack of a sink, which only supports short reads, this change is
effectively untested.

Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index df0b98cbbaab..4afa57f4bce2 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1512,7 +1512,7 @@ static ssize_t dw_dp_aux_transfer(struct drm_dp_aux *aux,
 		if (msg->request & DP_AUX_I2C_READ) {
 			size_t count = FIELD_GET(AUX_BYTES_READ, value) - 1;
 
-			if (count != msg->size)
+			if (!count || count > msg->size)
 				return -EBUSY;
 
 			ret = dw_dp_aux_read_data(dp, msg->buffer, count);

-- 
2.53.0

[PATCH v12 08/23] drm/bridge: synopsys: dw-dp: Free output_fmts when none are valid

[Sebastian Reichel]

If dw_dp_bandwidth_ok() returns false for all formats, *num_output_fmts
might end up becoming 0. In this case functions calling it assume that
nothing needs to be free'd, so free output_fmts within the function to
avoid leaking memory.

Fixes: 86eecc3a9c2e ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 4afa57f4bce2..158c727ab58b 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1821,6 +1821,11 @@ static u32 *dw_dp_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
 		output_fmts[j++] = fmt->bus_format;
 	}
 
+	if (j == 0) {
+		kfree(output_fmts);
+		output_fmts = NULL;
+	}
+
 	*num_output_fmts = j;
 
 	return output_fmts;

-- 
2.53.0

[PATCH v12 09/23] drm/bridge: synopsys: dw-dp: Support MEDIA_BUS_FMT_FIXED

[Sebastian Reichel]

Add support for MEDIA_BUS_FMT_FIXED, which is e.g. requested for USB-C
DP chains as the last bridge in the chain (aux-hpd-bridge) does not
implement atomic_get_output_bus_fmts(), which results in the generic
drm_atomic_bridge_chain_select_bus_fmts() code using MEDIA_BUS_FMT_FIXED
instead. For decent support of this, two areas are changed:

1. In atomic_check, resolving MEDIA_BUS_FMT_FIXED output format by
   using the negotiated input format.

2. Implementing a custom .atomic_get_input_bus_fmts hook that, on
   MEDIA_BUS_FMT_FIXED, advertises all bandwidth-validated formats
   from dw_dp_bridge_atomic_get_output_bus_fmts(). This lets the
   upstream encoder negotiate the best mutually supported format.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 34 +++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 158c727ab58b..5db9063ee97e 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1536,6 +1536,7 @@ static int dw_dp_bridge_atomic_check(struct drm_bridge *bridge,
 				     struct drm_connector_state *conn_state)
 {
 	struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode;
+	unsigned int out_bus_format = bridge_state->output_bus_cfg.format;
 	struct dw_dp *dp = bridge_to_dp(bridge);
 	struct dw_dp_bridge_state *state;
 	const struct dw_dp_output_format *fmt;
@@ -1546,7 +1547,10 @@ static int dw_dp_bridge_atomic_check(struct drm_bridge *bridge,
 	state = to_dw_dp_bridge_state(bridge_state);
 	mode = &state->mode;
 
-	fmt = dw_dp_get_output_format(bridge_state->output_bus_cfg.format);
+	if (out_bus_format == MEDIA_BUS_FMT_FIXED)
+		out_bus_format = bridge_state->input_bus_cfg.format;
+
+	fmt = dw_dp_get_output_format(out_bus_format);
 	if (!fmt)
 		return -EINVAL;
 
@@ -1831,6 +1835,32 @@ static u32 *dw_dp_bridge_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
 	return output_fmts;
 }
 
+static u32 *
+dw_dp_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+				       struct drm_bridge_state *bridge_state,
+				       struct drm_crtc_state *crtc_state,
+				       struct drm_connector_state *conn_state,
+				       u32 output_fmt,
+				       unsigned int *num_input_fmts)
+{
+	/*
+	 * MEDIA_BUS_FMT_FIXED means the downstream bridge does not constrain
+	 * the bus format. In that case, advertise all formats supported by the
+	 * DP link so the upstream encoder can negotiate the best match.
+	 */
+	if (output_fmt == MEDIA_BUS_FMT_FIXED)
+		return dw_dp_bridge_atomic_get_output_bus_fmts(bridge,
+							       bridge_state,
+							       crtc_state,
+							       conn_state,
+							       num_input_fmts);
+
+	return drm_atomic_helper_bridge_propagate_bus_fmt(bridge, bridge_state,
+							 crtc_state, conn_state,
+							 output_fmt,
+							 num_input_fmts);
+}
+
 static struct drm_bridge_state *dw_dp_bridge_atomic_duplicate_state(struct drm_bridge *bridge)
 {
 	struct dw_dp_bridge_state *state;
@@ -1883,7 +1913,7 @@ static const struct drm_bridge_funcs dw_dp_bridge_funcs = {
 	.atomic_duplicate_state = dw_dp_bridge_atomic_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
 	.atomic_create_state = drm_atomic_helper_bridge_create_state,
-	.atomic_get_input_bus_fmts = drm_atomic_helper_bridge_propagate_bus_fmt,
+	.atomic_get_input_bus_fmts = dw_dp_bridge_atomic_get_input_bus_fmts,
 	.atomic_get_output_bus_fmts = dw_dp_bridge_atomic_get_output_bus_fmts,
 	.atomic_check = dw_dp_bridge_atomic_check,
 	.mode_valid = dw_dp_bridge_mode_valid,

-- 
2.53.0

[PATCH v12 10/23] drm/bridge: synopsys: dw-dp: Add follow-up bridge support

[Sebastian Reichel]

Add support to use USB-C connectors with the DP altmode helper code on
devicetree based platforms. To get this working there must be a DRM
bridge chain from the DisplayPort controller to the USB-C connector.
E.g. on Rockchip RK3576:

root@rk3576 # cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dw_dp_bridge_funcs
        refcount: 7
        type: [10] DP
        OF: /soc/dp@27e40000:rockchip,rk3576-dp
        ops: [0x47] detect edid hpd
bridge[1]: drm_aux_bridge_funcs
        refcount: 4
        type: [0] Unknown
        OF: /soc/phy@2b010000:rockchip,rk3576-usbdp-phy
        ops: [0x0]
bridge[2]: drm_aux_hpd_bridge_funcs
        refcount: 5
        type: [10] DP
        OF: /soc/i2c@2ac50000/typec-portc@22/connector:usb-c-connector
        ops: [0x4] hpd

It's fine to fatally error out when there is no follow-up bridge
as the Rockchip Designware Displayport controller is the only
user of the bridge helper and has the port marked as required
in its binding.

Reviewed-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 5db9063ee97e..74ba1306caee 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -327,6 +327,7 @@ struct dw_dp {
 
 	struct dw_dp_link link;
 	struct dw_dp_plat_data plat_data;
+	struct drm_bridge *next_bridge;
 	u8 pixel_mode;
 
 	DECLARE_BITMAP(sdp_reg_bank, SDP_REG_BANK_SIZE);
@@ -1895,7 +1896,22 @@ static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 
 	enable_irq(dp->irq);
 
+	ret = drm_bridge_attach(encoder, dp->next_bridge, bridge,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err(dev, "Failed to attach next bridge: %d\n", ret);
+		goto err_disable_irq;
+	}
+
 	return 0;
+
+err_disable_irq:
+	disable_irq(dp->irq);
+	cancel_work_sync(&dp->hpd_work);
+
+	drm_dp_aux_unregister(&dp->aux);
+
+	return ret;
 }
 
 static void dw_dp_bridge_detach(struct drm_bridge *bridge)
@@ -2061,6 +2077,13 @@ void dw_dp_unbind(struct dw_dp *dp)
 }
 EXPORT_SYMBOL_GPL(dw_dp_unbind);
 
+static void dw_dp_put_next_bridge(void *data)
+{
+	struct dw_dp *dp = data;
+
+	drm_bridge_put(dp->next_bridge);
+}
+
 static void dw_dp_phy_exit(void *data)
 {
 	struct dw_dp *dp = data;
@@ -2156,6 +2179,16 @@ struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_
 	if (ret)
 		return ERR_PTR(ret);
 
+	dp->next_bridge = of_drm_get_bridge_by_endpoint(dev->of_node, 1, 0);
+	if (IS_ERR(dp->next_bridge)) {
+		dev_err_probe(dev, PTR_ERR(dp->next_bridge), "failed to get follow-up bridge\n");
+		return ERR_CAST(dp->next_bridge);
+	}
+
+	ret = devm_add_action_or_reset(dev, dw_dp_put_next_bridge, dp);
+	if (ret)
+		return ERR_PTR(ret);
+
 	dw_dp_init_hw(dp);
 
 	ret = phy_init(dp->phy);

-- 
2.53.0

[PATCH v12 11/23] drm/bridge: Add out-of-band HPD notify handler

[Sebastian Reichel]

For DP bridges, that can be used for DP AltMode, it might be necessary
to enforce HPD status. There is an existing ->oob_hotplug_event() on
the DRM connector, but it currently just calls into hpd_notify().

As DP bridge drivers usually also implement .detect and that also
generates calls into hpd_notify, this is a bad place to force the
HPD status as the follow-up detect call might force it off again
resulting in all follow-up calls to the detection routine also
failing.

Avoid this by having a dedicated function for OOB events.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/display/drm_bridge_connector.c |  6 ++++++
 include/drm/drm_bridge.h                       | 14 ++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/gpu/drm/display/drm_bridge_connector.c b/drivers/gpu/drm/display/drm_bridge_connector.c
index 2202e6044444..2d49d7f27def 100644
--- a/drivers/gpu/drm/display/drm_bridge_connector.c
+++ b/drivers/gpu/drm/display/drm_bridge_connector.c
@@ -181,6 +181,12 @@ static void drm_bridge_connector_oob_hotplug_event(struct drm_connector *connect
 	struct drm_bridge_connector *bridge_connector =
 		to_drm_bridge_connector(connector);
 
+	/* Notify all bridges in the pipeline of hotplug events. */
+	drm_for_each_bridge_in_chain(bridge_connector->encoder, bridge) {
+		if (bridge->funcs->oob_notify)
+			bridge->funcs->oob_notify(bridge, connector, status);
+	}
+
 	drm_bridge_connector_handle_hpd(bridge_connector, status);
 }
 
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 1981d24a700d..753f193c2803 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -540,6 +540,20 @@ struct drm_bridge_funcs {
 	 */
 	void (*hpd_disable)(struct drm_bridge *bridge);
 
+	/**
+	 * @oob_notify:
+	 *
+	 * Notify the bridge of out of band hot plug detection.
+	 *
+	 * This callback is optional, it may be implemented by bridges that
+	 * need to be notified of display connection or disconnection for
+	 * internal reasons. One use case is to force the DP controllers HPD
+	 * signal for USB-C DP AltMode.
+	 */
+	void (*oob_notify)(struct drm_bridge *bridge,
+			   struct drm_connector *connector,
+			   enum drm_connector_status status);
+
 	/**
 	 * @hdmi_tmds_char_rate_valid:
 	 *

-- 
2.53.0

[PATCH v12 12/23] drm/bridge: synopsys: dw-dp: Support software triggered OOB HPD

[Sebastian Reichel]

Add support for USB-C DP AltMode out-of-band hotplug handling. The
handling itself is implemented in the platform specific driver as the
registers to force HPD state are not part of the Designware DisplayPort
IP itself. Instead the platform integration might provide the necessary
functionality to mux the HPD signal.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 41 +++++++++++++++++++++++++++++++++
 include/drm/bridge/dw_dp.h              |  3 +++
 2 files changed, 44 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 74ba1306caee..b4eed4d0a520 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1875,6 +1875,19 @@ static struct drm_bridge_state *dw_dp_bridge_atomic_duplicate_state(struct drm_b
 	return &state->base;
 }
 
+static bool dw_dp_is_routed_to_usb_c(struct drm_encoder *encoder)
+{
+	struct drm_bridge *last_bridge __free(drm_bridge_put) = NULL;
+	struct fwnode_handle *fwnode;
+
+	last_bridge = drm_bridge_chain_get_last_bridge(encoder);
+	if (!last_bridge)
+		return false;
+
+	fwnode = of_fwnode_handle(last_bridge->of_node);
+	return fwnode_device_is_compatible(fwnode, "usb-c-connector");
+}
+
 static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 			       struct drm_encoder *encoder,
 			       enum drm_bridge_attach_flags flags)
@@ -1903,6 +1916,13 @@ static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 		goto err_disable_irq;
 	}
 
+	if (dw_dp_is_routed_to_usb_c(encoder)) {
+		dev_dbg(dev, "USB-C mode\n");
+
+		if (dp->plat_data.hpd_sw_sel)
+			dp->plat_data.hpd_sw_sel(dp->plat_data.data, 1);
+	}
+
 	return 0;
 
 err_disable_irq:
@@ -1923,6 +1943,22 @@ static void dw_dp_bridge_detach(struct drm_bridge *bridge)
 	drm_dp_aux_unregister(&dp->aux);
 }
 
+static void dw_dp_bridge_oob_notify(struct drm_bridge *bridge,
+				    struct drm_connector *connector,
+				    enum drm_connector_status status)
+{
+	bool hpd_high = status != connector_status_disconnected;
+	struct dw_dp *dp = bridge_to_dp(bridge);
+
+	if (!dp->plat_data.hpd_sw_cfg) {
+		dev_err_once(dp->dev, "Missing platform handler for OOB HPD handling\n");
+		return;
+	}
+
+	dev_dbg(dp->dev, "Force HPD connected=%s\n", str_yes_no(hpd_high));
+	dp->plat_data.hpd_sw_cfg(dp->plat_data.data, hpd_high);
+}
+
 static const struct drm_bridge_funcs dw_dp_bridge_funcs = {
 	.attach = dw_dp_bridge_attach,
 	.detach = dw_dp_bridge_detach,
@@ -1937,6 +1973,7 @@ static const struct drm_bridge_funcs dw_dp_bridge_funcs = {
 	.atomic_disable = dw_dp_bridge_atomic_disable,
 	.detect = dw_dp_bridge_detect,
 	.edid_read = dw_dp_bridge_edid_read,
+	.oob_notify = dw_dp_bridge_oob_notify,
 };
 
 static int dw_dp_link_retrain(struct dw_dp *dp)
@@ -2105,6 +2142,10 @@ struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_
 
 	dp->dev = dev;
 	dp->pixel_mode = plat_data->pixel_mode;
+
+	dp->plat_data.hpd_sw_sel = plat_data->hpd_sw_sel;
+	dp->plat_data.hpd_sw_cfg = plat_data->hpd_sw_cfg;
+	dp->plat_data.data = plat_data->data;
 	dp->plat_data.max_link_rate = plat_data->max_link_rate;
 
 	INIT_WORK(&dp->hpd_work, dw_dp_hpd_work);
diff --git a/include/drm/bridge/dw_dp.h b/include/drm/bridge/dw_dp.h
index a82412a9e769..79b2cdf0df99 100644
--- a/include/drm/bridge/dw_dp.h
+++ b/include/drm/bridge/dw_dp.h
@@ -20,6 +20,9 @@ enum {
 struct dw_dp_plat_data {
 	u32 max_link_rate;
 	u8 pixel_mode;
+	void *data;
+	void (*hpd_sw_sel)(void *data, bool hpd);
+	void (*hpd_sw_cfg)(void *data, bool hpd);
 };
 
 int dw_dp_bind(struct dw_dp *dp, struct drm_encoder *encoder);

-- 
2.53.0

[PATCH v12 13/23] drm/rockchip: dw_dp: Implement out-of-band HPD handling

[Sebastian Reichel]

Implement out-of-band hotplug handling, which will be used to receive
external hotplug information from the USB-C state machine. This is
currently handled by the USBDP PHY, which brings quite some trouble
as the register being accessed requires the power-domain from the DP
controller. Thus this patch prevents massive SError problems once
runtime PM is implemented (and enabled) in the DP driver. Apart from
that it avoids custom TypeC HPD info parsing in the USBDP PHY driver.

In contrast to the USBDP PHY this does not just enable the hotplug
signal when a DP AltMode capable adapter is plugged in, but instead
properly detects if a cable is plugged in for things like USB-C to
HDMI adapters.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/rockchip/dw_dp-rockchip.c | 116 ++++++++++++++++++++++++++++--
 1 file changed, 111 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
index 38e8fe75718e..c5386653991d 100644
--- a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
@@ -7,9 +7,12 @@
  */
 
 #include <linux/component.h>
+#include <linux/hw_bitfield.h>
 #include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/videodev2.h>
 
 #include <drm/bridge/dw_dp.h>
@@ -23,12 +26,46 @@
 
 #include "rockchip_drm_drv.h"
 
+#define ROCKCHIP_MAX_CTRLS 2
+
+#define ROCKCHIP_VO_GRF_DP_SINK_HPD_SEL BIT(10)
+#define ROCKCHIP_VO_GRF_DP_SINK_HPD_CFG BIT(11)
+
+struct rockchip_dw_dp_plat_data {
+	u8 num_ctrls;
+	u64 ctrl_ids[ROCKCHIP_MAX_CTRLS];
+	u32 max_link_rate;
+	u8 pixel_mode;
+	u32 hpd_reg[ROCKCHIP_MAX_CTRLS];
+};
+
 struct rockchip_dw_dp {
 	struct dw_dp *base;
 	struct device *dev;
+	const struct rockchip_dw_dp_plat_data *pdata;
+	struct regmap *vo_grf;
 	struct rockchip_encoder *encoder;
+	int id;
 };
 
+static void dw_dp_rockchip_hpd_sw_sel(void *data, bool force_hpd_from_sw)
+{
+	struct rockchip_dw_dp *dp = data;
+	u32 hpd_reg = dp->pdata->hpd_reg[dp->id];
+
+	regmap_write(dp->vo_grf, hpd_reg,
+		     FIELD_PREP_WM16(ROCKCHIP_VO_GRF_DP_SINK_HPD_SEL, force_hpd_from_sw));
+}
+
+static void dw_dp_rockchip_hpd_sw_cfg(void *data, bool hpd)
+{
+	struct rockchip_dw_dp *dp = data;
+	u32 hpd_reg = dp->pdata->hpd_reg[dp->id];
+
+	regmap_write(dp->vo_grf, hpd_reg,
+		     FIELD_PREP_WM16(ROCKCHIP_VO_GRF_DP_SINK_HPD_CFG, hpd));
+}
+
 static int dw_dp_encoder_atomic_check(struct drm_encoder *encoder,
 				      struct drm_crtc_state *crtc_state,
 				      struct drm_connector_state *conn_state)
@@ -71,6 +108,35 @@ static const struct drm_encoder_helper_funcs dw_dp_encoder_helper_funcs = {
 	.atomic_check		= dw_dp_encoder_atomic_check,
 };
 
+static struct regmap *dw_dp_rockchip_get_vo_grf(struct rockchip_dw_dp *dp)
+{
+	struct device_node *np = dev_of_node(dp->dev);
+	struct of_phandle_args args;
+	struct regmap *regmap;
+	int ret;
+
+	ret = of_parse_phandle_with_args(np, "phys", "#phy-cells", 0, &args);
+	if (ret)
+		return ERR_PTR(-ENODEV);
+
+	/*
+	 * Limit this workaround to RK3576 and RK3588, potential future platforms
+	 * reusing the driver should just add a VO GRF phandle in the DisplayPort
+	 * controller DT node.
+	 */
+	if (!of_device_is_compatible(args.np, "rockchip,rk3576-usbdp-phy") &&
+	    !of_device_is_compatible(args.np, "rockchip,rk3588-usbdp-phy")) {
+		regmap = ERR_PTR(-ENODEV);
+		goto out_put_node;
+	}
+
+	regmap = syscon_regmap_lookup_by_phandle(args.np, "rockchip,vo-grf");
+
+out_put_node:
+	of_node_put(args.np);
+	return regmap;
+}
+
 static int dw_dp_rockchip_bind(struct device *dev, struct device *master, void *data)
 {
 	struct rockchip_dw_dp *dp = dev_get_drvdata(dev);
@@ -121,19 +187,53 @@ static const struct component_ops dw_dp_rockchip_component_ops = {
 
 static int dw_dp_rockchip_probe(struct platform_device *pdev)
 {
-	const struct dw_dp_plat_data *plat_data;
+	const struct rockchip_dw_dp_plat_data *plat_data_const;
+	struct dw_dp_plat_data *plat_data;
 	struct device *dev = &pdev->dev;
 	struct rockchip_dw_dp *dp;
+	struct resource *res;
+	int id;
 
-	plat_data = of_device_get_match_data(dev);
-	if (!plat_data)
+	plat_data_const = device_get_match_data(dev);
+	if (!plat_data_const)
 		return -ENODEV;
 
+	plat_data = devm_kzalloc(dev, sizeof(*plat_data), GFP_KERNEL);
+	if (!plat_data)
+		return -ENOMEM;
+
 	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
 	if (!dp)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, dp);
 	dp->dev = dev;
+	dp->pdata = plat_data_const;
+
+	res = platform_get_mem_or_io(pdev, 0);
+	if (!res)
+		return -ENODEV;
+
+	/* find the DisplayPort ID from the io address */
+	dp->id = -ENODEV;
+	for (id = 0; id < plat_data_const->num_ctrls; id++) {
+		if (res->start == plat_data_const->ctrl_ids[id]) {
+			dp->id = id;
+			break;
+		}
+	}
+
+	if (dp->id < 0)
+		return dp->id;
+
+	dp->vo_grf = dw_dp_rockchip_get_vo_grf(dp);
+	if (IS_ERR(dp->vo_grf))
+		return PTR_ERR(dp->vo_grf);
+
+	plat_data->max_link_rate = plat_data_const->max_link_rate;
+	plat_data->pixel_mode = plat_data_const->pixel_mode;
+	plat_data->hpd_sw_sel = dw_dp_rockchip_hpd_sw_sel;
+	plat_data->hpd_sw_cfg = dw_dp_rockchip_hpd_sw_cfg;
+	plat_data->data = dp;
 
 	dp->base = dw_dp_probe(pdev, plat_data);
 	if (IS_ERR(dp->base))
@@ -147,14 +247,20 @@ static void dw_dp_rockchip_remove(struct platform_device *pdev)
 	component_del(&pdev->dev, &dw_dp_rockchip_component_ops);
 }
 
-static const struct dw_dp_plat_data rk3588_dp_plat_data = {
+static const struct rockchip_dw_dp_plat_data rk3588_dp_plat_data = {
+	.num_ctrls = 2,
+	.ctrl_ids = {0xfde50000, 0xfde60000},
 	.max_link_rate = 810000,
 	.pixel_mode = DW_DP_MP_QUAD_PIXEL,
+	.hpd_reg = {0x0000, 0x0008},
 };
 
-static const struct dw_dp_plat_data rk3576_dp_plat_data = {
+static const struct rockchip_dw_dp_plat_data rk3576_dp_plat_data = {
+	.num_ctrls = 1,
+	.ctrl_ids = {0x27e40000},
 	.max_link_rate = 810000,
 	.pixel_mode = DW_DP_MP_DUAL_PIXEL,
+	.hpd_reg = {0x0000},
 };
 
 static const struct of_device_id dw_dp_of_match[] = {

-- 
2.53.0

[PATCH v12 14/23] drm/bridge: synopsys: dw-dp: Add Runtime PM support

[Sebastian Reichel]

Add runtime PM stubs to the Synopsys DesignWare DisplayPort bridge
driver. Support is not enabled automatically and must be hooked up
in the platform specific glue code.

The early bits of the dw_dp_probe function are split into a new
function called dw_dp_alloc, so that the platform driver can assign
it before running dw_dp_probe. This is necessary because the runtime
PM resume/suspend events land at the platform driver and must be
forwarded to the helper once runtime PM is enabled in the middle
of the probe function.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c   | 207 +++++++++++++++++++++++++-----
 drivers/gpu/drm/rockchip/dw_dp-rockchip.c |   8 +-
 include/drm/bridge/dw_dp.h                |   7 +-
 3 files changed, 187 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index b4eed4d0a520..4d61ca8f0174 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -329,6 +329,9 @@ struct dw_dp {
 	struct dw_dp_plat_data plat_data;
 	struct drm_bridge *next_bridge;
 	u8 pixel_mode;
+	bool usbc_mode;
+	bool usbc_hpd;
+	bool pm_active;
 
 	DECLARE_BITMAP(sdp_reg_bank, SDP_REG_BANK_SIZE);
 };
@@ -1466,6 +1469,11 @@ static ssize_t dw_dp_aux_transfer(struct drm_dp_aux *aux,
 	if (WARN_ON(msg->size > 16))
 		return -E2BIG;
 
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dp->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return ret;
+
 	reinit_completion(&dp->complete);
 
 	switch (msg->request & ~DP_AUX_I2C_MOT) {
@@ -1681,6 +1689,13 @@ static void dw_dp_bridge_atomic_enable(struct drm_bridge *bridge,
 	struct drm_connector_state *conn_state;
 	int ret;
 
+	ret = pm_runtime_get_active(dp->dev, RPM_TRANSPARENT);
+	if (ret) {
+		dev_err(dp->dev, "runtime PM failure\n");
+		return;
+	}
+	dp->pm_active = true;
+
 	connector = drm_atomic_get_new_connector_for_encoder(state, bridge->encoder);
 	if (!connector) {
 		dev_err(dp->dev, "failed to get connector\n");
@@ -1731,10 +1746,15 @@ static void dw_dp_bridge_atomic_disable(struct drm_bridge *bridge,
 {
 	struct dw_dp *dp = bridge_to_dp(bridge);
 
+	if (!dp->pm_active)
+		return;
+	dp->pm_active = false;
+
 	dw_dp_video_disable(dp);
 	dw_dp_link_disable(dp);
 	bitmap_zero(dp->sdp_reg_bank, SDP_REG_BANK_SIZE);
 	dw_dp_reset(dp);
+	pm_runtime_put_autosuspend(dp->dev);
 }
 
 static bool dw_dp_hpd_detect_link(struct dw_dp *dp, struct drm_connector *connector)
@@ -1755,6 +1775,10 @@ static enum drm_connector_status dw_dp_bridge_detect(struct drm_bridge *bridge,
 {
 	struct dw_dp *dp = bridge_to_dp(bridge);
 
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dp->dev, pm);
+	if (PM_RUNTIME_ACQUIRE_ERR(&pm))
+		return connector_status_disconnected;
+
 	if (!dw_dp_hpd_detect(dp))
 		return connector_status_disconnected;
 
@@ -1896,6 +1920,10 @@ static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 	struct device *dev = dp->dev;
 	int ret;
 
+	ret = pm_runtime_get_active(dp->dev, RPM_TRANSPARENT);
+	if (ret)
+		return ret;
+
 	dp->aux.dev = dev;
 	dp->aux.drm_dev = encoder->dev;
 	dp->aux.name = dev_name(dev);
@@ -1904,7 +1932,7 @@ static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 	ret = drm_dp_aux_register(&dp->aux);
 	if (ret) {
 		dev_err(dev, "Aux register failed: %d\n", ret);
-		return ret;
+		goto err_runtime_pm_put;
 	}
 
 	enable_irq(dp->irq);
@@ -1916,11 +1944,15 @@ static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 		goto err_disable_irq;
 	}
 
-	if (dw_dp_is_routed_to_usb_c(encoder)) {
-		dev_dbg(dev, "USB-C mode\n");
+	dp->usbc_mode = dw_dp_is_routed_to_usb_c(encoder);
+
+	if (dp->plat_data.hpd_sw_sel)
+		dp->plat_data.hpd_sw_sel(dp->plat_data.data, dp->usbc_mode);
 
-		if (dp->plat_data.hpd_sw_sel)
-			dp->plat_data.hpd_sw_sel(dp->plat_data.data, 1);
+	/* USB-C has out-of-band hotplug detection, so device may runtime suspend */
+	if (dp->usbc_mode) {
+		dev_dbg(dev, "USB-C mode\n");
+		pm_runtime_put_autosuspend(dp->dev);
 	}
 
 	return 0;
@@ -1931,6 +1963,9 @@ static int dw_dp_bridge_attach(struct drm_bridge *bridge,
 
 	drm_dp_aux_unregister(&dp->aux);
 
+err_runtime_pm_put:
+	pm_runtime_put_sync(dp->dev);
+
 	return ret;
 }
 
@@ -1941,6 +1976,9 @@ static void dw_dp_bridge_detach(struct drm_bridge *bridge)
 	disable_irq(dp->irq);
 	cancel_work_sync(&dp->hpd_work);
 	drm_dp_aux_unregister(&dp->aux);
+
+	if (!dp->usbc_mode)
+		pm_runtime_put_sync(dp->dev);
 }
 
 static void dw_dp_bridge_oob_notify(struct drm_bridge *bridge,
@@ -1949,12 +1987,20 @@ static void dw_dp_bridge_oob_notify(struct drm_bridge *bridge,
 {
 	bool hpd_high = status != connector_status_disconnected;
 	struct dw_dp *dp = bridge_to_dp(bridge);
+	int ret;
+
+	dp->usbc_hpd = hpd_high;
 
 	if (!dp->plat_data.hpd_sw_cfg) {
 		dev_err_once(dp->dev, "Missing platform handler for OOB HPD handling\n");
 		return;
 	}
 
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dp->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return;
+
 	dev_dbg(dp->dev, "Force HPD connected=%s\n", str_yes_no(hpd_high));
 	dp->plat_data.hpd_sw_cfg(dp->plat_data.data, hpd_high);
 }
@@ -2011,6 +2057,11 @@ static void dw_dp_hpd_work(struct work_struct *work)
 	bool long_hpd;
 	int ret;
 
+	PM_RUNTIME_ACQUIRE_AUTOSUSPEND(dp->dev, pm);
+	ret = PM_RUNTIME_ACQUIRE_ERR(&pm);
+	if (ret)
+		return;
+
 	mutex_lock(&dp->irq_lock);
 	long_hpd = dp->hotplug.long_hpd;
 	mutex_unlock(&dp->irq_lock);
@@ -2128,13 +2179,24 @@ static void dw_dp_phy_exit(void *data)
 	phy_exit(dp->phy);
 }
 
-struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_data *plat_data)
+static void dw_dp_manual_suspend(void *data)
+{
+	struct dw_dp *dp = data;
+
+	dw_dp_runtime_suspend(dp);
+}
+
+static void dw_dp_enable_irq(void *data)
+{
+	struct dw_dp *dp = data;
+
+	enable_irq(dp->irq);
+}
+
+struct dw_dp *dw_dp_alloc(struct platform_device *pdev, const struct dw_dp_plat_data *plat_data)
 {
 	struct device *dev = &pdev->dev;
-	struct drm_bridge *bridge;
-	void __iomem *res;
 	struct dw_dp *dp;
-	int ret;
 
 	dp = devm_drm_bridge_alloc(dev, struct dw_dp, bridge, &dw_dp_bridge_funcs);
 	if (IS_ERR(dp))
@@ -2147,58 +2209,71 @@ struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_
 	dp->plat_data.hpd_sw_cfg = plat_data->hpd_sw_cfg;
 	dp->plat_data.data = plat_data->data;
 	dp->plat_data.max_link_rate = plat_data->max_link_rate;
+	dp->plat_data.autosuspend_delay = plat_data->autosuspend_delay;
 
 	INIT_WORK(&dp->hpd_work, dw_dp_hpd_work);
 	init_completion(&dp->complete);
 
+	return dp;
+}
+EXPORT_SYMBOL_GPL(dw_dp_alloc);
+
+int dw_dp_probe(struct dw_dp *dp)
+{
+	struct device *dev = dp->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct drm_bridge *bridge;
+	void __iomem *res;
+	int ret;
+
 	ret = devm_mutex_init(dev, &dp->irq_lock);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
 	res = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(res))
-		return ERR_CAST(res);
+		return PTR_ERR(res);
 
 	dp->regmap = devm_regmap_init_mmio(dev, res, &dw_dp_regmap_config);
 	if (IS_ERR(dp->regmap)) {
 		dev_err_probe(dev, PTR_ERR(dp->regmap), "failed to create regmap\n");
-		return ERR_CAST(dp->regmap);
+		return PTR_ERR(dp->regmap);
 	}
 
 	dp->phy = devm_of_phy_get(dev, dev->of_node, NULL);
 	if (IS_ERR(dp->phy)) {
 		dev_err_probe(dev, PTR_ERR(dp->phy), "failed to get phy\n");
-		return ERR_CAST(dp->phy);
+		return PTR_ERR(dp->phy);
 	}
 
-	dp->apb_clk = devm_clk_get_enabled(dev, "apb");
+	dp->apb_clk = devm_clk_get(dev, "apb");
 	if (IS_ERR(dp->apb_clk)) {
 		dev_err_probe(dev, PTR_ERR(dp->apb_clk), "failed to get apb clock\n");
-		return ERR_CAST(dp->apb_clk);
+		return PTR_ERR(dp->apb_clk);
 	}
 
-	dp->aux_clk = devm_clk_get_enabled(dev, "aux");
+	dp->aux_clk = devm_clk_get(dev, "aux");
 	if (IS_ERR(dp->aux_clk)) {
 		dev_err_probe(dev, PTR_ERR(dp->aux_clk), "failed to get aux clock\n");
-		return ERR_CAST(dp->aux_clk);
+		return PTR_ERR(dp->aux_clk);
 	}
 
 	dp->i2s_clk = devm_clk_get_optional(dev, "i2s");
 	if (IS_ERR(dp->i2s_clk)) {
 		dev_err_probe(dev, PTR_ERR(dp->i2s_clk), "failed to get i2s clock\n");
-		return ERR_CAST(dp->i2s_clk);
+		return PTR_ERR(dp->i2s_clk);
 	}
 
 	dp->spdif_clk = devm_clk_get_optional(dev, "spdif");
 	if (IS_ERR(dp->spdif_clk)) {
 		dev_err_probe(dev, PTR_ERR(dp->spdif_clk), "failed to get spdif clock\n");
-		return ERR_CAST(dp->spdif_clk);
+		return PTR_ERR(dp->spdif_clk);
 	}
 
 	dp->hdcp_clk = devm_clk_get(dev, "hdcp");
 	if (IS_ERR(dp->hdcp_clk)) {
 		dev_err_probe(dev, PTR_ERR(dp->hdcp_clk), "failed to get hdcp clock\n");
-		return ERR_CAST(dp->hdcp_clk);
+		return PTR_ERR(dp->hdcp_clk);
 	}
 
 	/*
@@ -2208,39 +2283,67 @@ struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_
 	dp->rstc = devm_reset_control_get(dev, NULL);
 	if (IS_ERR(dp->rstc)) {
 		dev_err_probe(dev, PTR_ERR(dp->rstc), "failed to get reset control\n");
-		return ERR_CAST(dp->rstc);
+		return PTR_ERR(dp->rstc);
 	}
 
 	dp->irq = platform_get_irq(pdev, 0);
 	if (dp->irq < 0)
-		return ERR_PTR(dp->irq);
+		return dp->irq;
 
 	ret = devm_request_threaded_irq(dev, dp->irq, NULL, dw_dp_irq,
 					IRQF_ONESHOT | IRQF_NO_AUTOEN, dev_name(dev), dp);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
+
+	/*
+	 * Disable IRQ a second time; this ensures the interrupt is only
+	 * enabled when the bridge is attached AND runtime PM is enabled.
+	 * Also register a devm action to restore the correct balance during
+	 * device removal.
+	 */
+	disable_irq(dp->irq);
+
+	ret = devm_add_action_or_reset(dev, dw_dp_enable_irq, dp);
+	if (ret)
+		return ret;
 
 	dp->next_bridge = of_drm_get_bridge_by_endpoint(dev->of_node, 1, 0);
 	if (IS_ERR(dp->next_bridge)) {
 		dev_err_probe(dev, PTR_ERR(dp->next_bridge), "failed to get follow-up bridge\n");
-		return ERR_CAST(dp->next_bridge);
+		return PTR_ERR(dp->next_bridge);
 	}
 
 	ret = devm_add_action_or_reset(dev, dw_dp_put_next_bridge, dp);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	dw_dp_init_hw(dp);
+	if (dp->plat_data.autosuspend_delay > 0) {
+		pm_runtime_use_autosuspend(dev);
+		pm_runtime_set_autosuspend_delay(dev, dp->plat_data.autosuspend_delay);
+		ret = devm_pm_runtime_enable(dev);
+		if (ret)
+			return ret;
+	}
+
+	if (!pm_runtime_enabled(dev)) {
+		ret = dw_dp_runtime_resume(dp);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, dw_dp_manual_suspend, dp);
+		if (ret)
+			return ret;
+	}
 
 	ret = phy_init(dp->phy);
 	if (ret) {
 		dev_err_probe(dev, ret, "phy init failed\n");
-		return ERR_PTR(ret);
+		return ret;
 	}
 
 	ret = devm_add_action_or_reset(dev, dw_dp_phy_exit, dp);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
 	bridge = &dp->bridge;
 	bridge->of_node = dev->of_node;
@@ -2248,13 +2351,53 @@ struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_
 	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
 	bridge->ycbcr_420_allowed = true;
 
-	ret = devm_drm_bridge_add(dev, bridge);
+	return devm_drm_bridge_add(dev, bridge);
+}
+EXPORT_SYMBOL_GPL(dw_dp_probe);
+
+int dw_dp_runtime_suspend(struct dw_dp *dp)
+{
+	disable_irq(dp->irq);
+
+	clk_disable_unprepare(dp->aux_clk);
+	clk_disable_unprepare(dp->apb_clk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_dp_runtime_suspend);
+
+int dw_dp_runtime_resume(struct dw_dp *dp)
+{
+	int ret;
+
+	ret = clk_prepare_enable(dp->apb_clk);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	return dp;
+	ret = clk_prepare_enable(dp->aux_clk);
+	if (ret) {
+		clk_disable_unprepare(dp->apb_clk);
+		return ret;
+	}
+
+	if (dp->plat_data.hpd_sw_sel)
+		dp->plat_data.hpd_sw_sel(dp->plat_data.data, dp->usbc_mode);
+	if (dp->plat_data.hpd_sw_cfg)
+		dp->plat_data.hpd_sw_cfg(dp->plat_data.data, dp->usbc_hpd);
+
+	dw_dp_init_hw(dp);
+
+	enable_irq(dp->irq);
+
+	/*
+	 * HPD_HOT_PLUG bit is asserted only after the sink holds HPD
+	 * high for at least 100ms.
+	 */
+	msleep(110);
+
+	return 0;
 }
-EXPORT_SYMBOL_GPL(dw_dp_probe);
+EXPORT_SYMBOL_GPL(dw_dp_runtime_resume);
 
 MODULE_AUTHOR("Andy Yan <andyshrk@163.com>");
 MODULE_DESCRIPTION("DW DP Core Library");
diff --git a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
index c5386653991d..1cc6cfad4104 100644
--- a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
@@ -192,7 +192,7 @@ static int dw_dp_rockchip_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct rockchip_dw_dp *dp;
 	struct resource *res;
-	int id;
+	int id, ret;
 
 	plat_data_const = device_get_match_data(dev);
 	if (!plat_data_const)
@@ -235,10 +235,14 @@ static int dw_dp_rockchip_probe(struct platform_device *pdev)
 	plat_data->hpd_sw_cfg = dw_dp_rockchip_hpd_sw_cfg;
 	plat_data->data = dp;
 
-	dp->base = dw_dp_probe(pdev, plat_data);
+	dp->base = dw_dp_alloc(pdev, plat_data);
 	if (IS_ERR(dp->base))
 		return PTR_ERR(dp->base);
 
+	ret = dw_dp_probe(dp->base);
+	if (ret)
+		return ret;
+
 	return component_add(&pdev->dev, &dw_dp_rockchip_component_ops);
 }
 
diff --git a/include/drm/bridge/dw_dp.h b/include/drm/bridge/dw_dp.h
index 79b2cdf0df99..1e23180b565e 100644
--- a/include/drm/bridge/dw_dp.h
+++ b/include/drm/bridge/dw_dp.h
@@ -18,6 +18,7 @@ enum {
 };
 
 struct dw_dp_plat_data {
+	int autosuspend_delay;
 	u32 max_link_rate;
 	u8 pixel_mode;
 	void *data;
@@ -28,5 +29,9 @@ struct dw_dp_plat_data {
 int dw_dp_bind(struct dw_dp *dp, struct drm_encoder *encoder);
 void dw_dp_unbind(struct dw_dp *dp);
 
-struct dw_dp *dw_dp_probe(struct platform_device *pdev, const struct dw_dp_plat_data *plat_data);
+struct dw_dp *dw_dp_alloc(struct platform_device *pdev, const struct dw_dp_plat_data *plat_data);
+int dw_dp_probe(struct dw_dp *dp);
+
+int dw_dp_runtime_suspend(struct dw_dp *dp);
+int dw_dp_runtime_resume(struct dw_dp *dp);
 #endif /* __DW_DP__ */

-- 
2.53.0

[PATCH v12 15/23] drm/rockchip: dw_dp: Add runtime PM support

[Sebastian Reichel]

Add support for runtime PM to the Rockchip RK3576/3588 Synopsys
DesignWare DisplayPort driver.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/rockchip/dw_dp-rockchip.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
index 1cc6cfad4104..99d948a7c51f 100644
--- a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
@@ -12,6 +12,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/videodev2.h>
 
@@ -229,6 +230,7 @@ static int dw_dp_rockchip_probe(struct platform_device *pdev)
 	if (IS_ERR(dp->vo_grf))
 		return PTR_ERR(dp->vo_grf);
 
+	plat_data->autosuspend_delay = 500;
 	plat_data->max_link_rate = plat_data_const->max_link_rate;
 	plat_data->pixel_mode = plat_data_const->pixel_mode;
 	plat_data->hpd_sw_sel = dw_dp_rockchip_hpd_sw_sel;
@@ -251,6 +253,24 @@ static void dw_dp_rockchip_remove(struct platform_device *pdev)
 	component_del(&pdev->dev, &dw_dp_rockchip_component_ops);
 }
 
+static int dw_dp_rockchip_runtime_suspend(struct device *dev)
+{
+	struct rockchip_dw_dp *dp = dev_get_drvdata(dev);
+
+	return dw_dp_runtime_suspend(dp->base);
+}
+
+static int dw_dp_rockchip_runtime_resume(struct device *dev)
+{
+	struct rockchip_dw_dp *dp = dev_get_drvdata(dev);
+
+	return dw_dp_runtime_resume(dp->base);
+}
+
+static const struct dev_pm_ops dw_dp_pm_ops = {
+	RUNTIME_PM_OPS(dw_dp_rockchip_runtime_suspend, dw_dp_rockchip_runtime_resume, NULL)
+};
+
 static const struct rockchip_dw_dp_plat_data rk3588_dp_plat_data = {
 	.num_ctrls = 2,
 	.ctrl_ids = {0xfde50000, 0xfde60000},
@@ -285,5 +305,6 @@ struct platform_driver dw_dp_driver = {
 	.driver = {
 		.name = "dw-dp",
 		.of_match_table = dw_dp_of_match,
+		.pm = pm_ptr(&dw_dp_pm_ops),
 	},
 };

-- 
2.53.0

[PATCH v12 16/23] drm/rockchip: dw_dp: Add system PM support

[Sebastian Reichel]

Explicitly suspend the DP controller when the system goes to sleep and
more importantly resume it properly after system sleep exit to recover
USB-C HPD register state, which is lost when the system goes to sleep.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/rockchip/dw_dp-rockchip.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
index 99d948a7c51f..4cfb40494379 100644
--- a/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_dp-rockchip.c
@@ -269,6 +269,7 @@ static int dw_dp_rockchip_runtime_resume(struct device *dev)
 
 static const struct dev_pm_ops dw_dp_pm_ops = {
 	RUNTIME_PM_OPS(dw_dp_rockchip_runtime_suspend, dw_dp_rockchip_runtime_resume, NULL)
+	LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
 };
 
 static const struct rockchip_dw_dp_plat_data rk3588_dp_plat_data = {

-- 
2.53.0

[PATCH v12 19/23] drm/bridge: synopsys: dw-dp: Clear only enabled SDPs on atomic disable

[Sebastian Reichel]

dw_dp_bridge_atomic_disable() bulk-cleared the whole SDP register bank
allocation bitmap via bitmap_zero() resulting in the loss of all
tracking information. This results in a slot potentially being handed
out again by dw_dp_send_sdp(), which is still considered to be held
by the previous owner. Then the previous owner might free up the wrong
SDP later on.

Instead of bulk clearing the tracking information, the new
implementation only clears the SDPs actually configured during
dw_dp_bridge_atomic_enable() instead of the entire bank. The
introduced functionality for that will also be used by the to-be-added
audio infrastructure.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 27 +++++++++++++++++++++++----
 1 file changed, 23 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 1ae5c842a782..6e165e39b1f8 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -335,6 +335,7 @@ struct dw_dp {
 	bool usbc_hpd;
 	bool pm_active;
 
+	int vsc_sdp_nr;
 	DECLARE_BITMAP(sdp_reg_bank, SDP_REG_BANK_SIZE);
 };
 
@@ -1076,7 +1077,19 @@ static int dw_dp_send_sdp(struct dw_dp *dp, struct dw_dp_sdp *sdp)
 				   EN_HORIZONTAL_SDP << nr,
 				   EN_HORIZONTAL_SDP << nr);
 
-	return 0;
+	return nr;
+}
+
+static void dw_dp_clear_sdp(struct dw_dp *dp, int nr)
+{
+	regmap_clear_bits(dp->regmap, DW_DP_SDP_VERTICAL_CTRL,
+			  EN_VERTICAL_SDP << nr);
+
+	regmap_clear_bits(dp->regmap, DW_DP_SDP_HORIZONTAL_CTRL,
+			  EN_HORIZONTAL_SDP << nr);
+
+	scoped_guard(mutex, &dp->sdp_lock)
+		clear_bit(nr, dp->sdp_reg_bank);
 }
 
 static int dw_dp_send_vsc_sdp(struct dw_dp *dp)
@@ -1394,7 +1407,7 @@ static int dw_dp_video_enable(struct dw_dp *dp)
 			   FIELD_PREP(VIDEO_STREAM_ENABLE, 1));
 
 	if (dw_dp_video_need_vsc_sdp(dp))
-		dw_dp_send_vsc_sdp(dp);
+		dp->vsc_sdp_nr = dw_dp_send_vsc_sdp(dp);
 
 	return 0;
 }
@@ -1754,8 +1767,12 @@ static void dw_dp_bridge_atomic_disable(struct drm_bridge *bridge,
 
 	dw_dp_video_disable(dp);
 	dw_dp_link_disable(dp);
-	scoped_guard(mutex, &dp->sdp_lock)
-		bitmap_zero(dp->sdp_reg_bank, SDP_REG_BANK_SIZE);
+
+	if (dp->vsc_sdp_nr >= 0) {
+		dw_dp_clear_sdp(dp, dp->vsc_sdp_nr);
+		dp->vsc_sdp_nr = -1;
+	}
+
 	dw_dp_reset(dp);
 	pm_runtime_put_autosuspend(dp->dev);
 }
@@ -2352,6 +2369,8 @@ int dw_dp_probe(struct dw_dp *dp)
 	if (ret)
 		return ret;
 
+	dp->vsc_sdp_nr = -1;
+
 	bridge = &dp->bridge;
 	bridge->of_node = dev->of_node;
 	bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;

-- 
2.53.0

[PATCH v12 20/23] drm/bridge: synopsys: dw-dp: Use regmap_set_bits in dw_dp_send_sdp

[Sebastian Reichel]

Simplify dw_dp_send_sdp() a little bit by making use of
regmap_set_bits.

No functional change intended.

Tested-by: Igor Paunovic <royalnet026@gmail.com> # Orange Pi 5+
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 6e165e39b1f8..3c10cdb9ca28 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -1068,14 +1068,12 @@ static int dw_dp_send_sdp(struct dw_dp *dp, struct dw_dp_sdp *sdp)
 			     FIELD_PREP(SDP_REGS, get_unaligned_le32(payload)));
 
 	if (sdp->flags & DW_DP_SDP_VERTICAL_INTERVAL)
-		regmap_update_bits(dp->regmap, DW_DP_SDP_VERTICAL_CTRL,
-				   EN_VERTICAL_SDP << nr,
-				   EN_VERTICAL_SDP << nr);
+		regmap_set_bits(dp->regmap, DW_DP_SDP_VERTICAL_CTRL,
+				EN_VERTICAL_SDP << nr);
 
 	if (sdp->flags & DW_DP_SDP_HORIZONTAL_INTERVAL)
-		regmap_update_bits(dp->regmap, DW_DP_SDP_HORIZONTAL_CTRL,
-				   EN_HORIZONTAL_SDP << nr,
-				   EN_HORIZONTAL_SDP << nr);
+		regmap_set_bits(dp->regmap, DW_DP_SDP_HORIZONTAL_CTRL,
+				EN_HORIZONTAL_SDP << nr);
 
 	return nr;
 }

-- 
2.53.0

[PATCH v12 22/23] drm/bridge: synopsys: dw-dp: Add audio support

[Sebastian Reichel]

Implement audio support for the Synopsys DesignWare DisplayPort
controller.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 316 +++++++++++++++++++++++++++++++-
 1 file changed, 315 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 3c10cdb9ca28..bf3a53463394 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -23,16 +23,20 @@
 #include <drm/drm_bridge.h>
 #include <drm/drm_bridge_connector.h>
 #include <drm/display/drm_dp_helper.h>
+#include <drm/display/drm_hdmi_audio_helper.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_of.h>
 #include <drm/drm_print.h>
 #include <drm/drm_probe_helper.h>
 
+#include <sound/hdmi-codec.h>
+
 #define DW_DP_VERSION_NUMBER			0x0000
 #define DW_DP_VERSION_TYPE			0x0004
 #define DW_DP_ID				0x0008
 
 #define DW_DP_CONFIG_REG1			0x0100
+#define AUDIO_SELECT				GENMASK(2, 1)
 #define DW_DP_CONFIG_REG2			0x0104
 #define DW_DP_CONFIG_REG3			0x0108
 
@@ -109,6 +113,10 @@
 #define HBR_MODE_ENABLE				BIT(10)
 #define AUDIO_DATA_WIDTH			GENMASK(9, 5)
 #define AUDIO_DATA_IN_EN			GENMASK(4, 1)
+#define AUDIO_DATA_IN_EN_CHANNEL12		BIT(0)
+#define AUDIO_DATA_IN_EN_CHANNEL34		BIT(1)
+#define AUDIO_DATA_IN_EN_CHANNEL56		BIT(2)
+#define AUDIO_DATA_IN_EN_CHANNEL78		BIT(3)
 #define AUDIO_INF_SELECT			BIT(0)
 
 #define DW_DP_SDP_VERTICAL_CTRL			0x0500
@@ -252,6 +260,8 @@
 
 #define SDP_REG_BANK_SIZE			16
 
+#define DW_DP_SDP_VERSION			0x12
+
 struct dw_dp_link_caps {
 	bool enhanced_framing;
 	bool tps3_supported;
@@ -305,6 +315,19 @@ struct dw_dp_hotplug {
 	bool long_hpd;
 };
 
+enum dw_dp_audio_interface_support {
+	DW_DP_AUDIO_I2S_ONLY = 0,
+	DW_DP_AUDIO_SPDIF_ONLY = 1,
+	DW_DP_AUDIO_I2S_AND_SPDIF = 2,
+	DW_DP_AUDIO_NONE = 3,
+};
+
+enum dw_dp_audio_interface {
+	DW_DP_AUDIO_I2S = 0,
+	DW_DP_AUDIO_SPDIF = 1,
+	DW_DP_AUDIO_UNUSED,
+};
+
 struct dw_dp {
 	struct drm_bridge bridge;
 	struct device *dev;
@@ -320,10 +343,18 @@ struct dw_dp {
 	int irq;
 	struct work_struct hpd_work;
 	struct dw_dp_hotplug hotplug;
+	enum dw_dp_audio_interface audio_interface;
+	int audio_channels;
+	int audio_channel_allocation;
+	int audio_sample_width;
+	bool audio_muted;
+	int audio_sdp_nr;
 	/* Serialize hpd status access */
 	struct mutex irq_lock;
 	/* Serialize sdp_reg_bank access */
 	struct mutex sdp_lock;
+	/* Serialize audio state */
+	struct mutex audio_lock;
 
 	struct drm_dp_aux aux;
 
@@ -1696,6 +1727,261 @@ static int dw_dp_link_enable(struct dw_dp *dp)
 	return ret;
 }
 
+static int dw_dp_audio_infoframe_send(struct dw_dp *dp)
+{
+	struct hdmi_audio_infoframe frame;
+	struct dw_dp_sdp sdp;
+	int ret;
+
+	ret = hdmi_audio_infoframe_init(&frame);
+	if (ret < 0)
+		return ret;
+
+	frame.coding_type = HDMI_AUDIO_CODING_TYPE_STREAM;
+	frame.sample_frequency = HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM;
+	frame.sample_size = HDMI_AUDIO_SAMPLE_SIZE_STREAM;
+	frame.channels = dp->audio_channels;
+	frame.channel_allocation = dp->audio_channel_allocation;
+
+	ret = hdmi_audio_infoframe_pack_for_dp(&frame, &sdp.base, DW_DP_SDP_VERSION);
+	if (ret < 0)
+		return ret;
+
+	sdp.flags = DW_DP_SDP_VERTICAL_INTERVAL;
+
+	return dw_dp_send_sdp(dp, &sdp);
+}
+
+static void dw_dp_audio_infoframe_clear(struct dw_dp *dp)
+{
+	if (dp->audio_sdp_nr >= 0) {
+		dw_dp_clear_sdp(dp, dp->audio_sdp_nr);
+		dp->audio_sdp_nr = -1;
+	}
+
+	regmap_clear_bits(dp->regmap, DW_DP_SDP_VERTICAL_CTRL,
+			  EN_AUDIO_STREAM_SDP | EN_AUDIO_TIMESTAMP_SDP);
+	regmap_clear_bits(dp->regmap, DW_DP_SDP_HORIZONTAL_CTRL,
+			  EN_AUDIO_STREAM_SDP);
+
+	regmap_clear_bits(dp->regmap, DW_DP_AUD_CONFIG1, AUDIO_DATA_IN_EN);
+}
+
+static void __dw_dp_audio_disable(struct dw_dp *dp)
+{
+	dw_dp_audio_infoframe_clear(dp);
+
+	if (dp->audio_interface == DW_DP_AUDIO_SPDIF)
+		clk_disable_unprepare(dp->spdif_clk);
+	else if (dp->audio_interface == DW_DP_AUDIO_I2S)
+		clk_disable_unprepare(dp->i2s_clk);
+
+	dp->audio_interface = DW_DP_AUDIO_UNUSED;
+}
+
+static int __dw_dp_audio_enable(struct dw_dp *dp)
+{
+	u8 audio_data_in_en;
+
+	switch (dp->audio_channels) {
+	case 1:
+	case 2:
+		audio_data_in_en = AUDIO_DATA_IN_EN_CHANNEL12;
+		break;
+	case 8:
+		audio_data_in_en = AUDIO_DATA_IN_EN_CHANNEL12 |
+				   AUDIO_DATA_IN_EN_CHANNEL34 |
+				   AUDIO_DATA_IN_EN_CHANNEL56 |
+				   AUDIO_DATA_IN_EN_CHANNEL78;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	regmap_update_bits(dp->regmap, DW_DP_AUD_CONFIG1,
+			   AUDIO_DATA_IN_EN | NUM_CHANNELS | AUDIO_DATA_WIDTH |
+			   AUDIO_INF_SELECT | HBR_MODE_ENABLE | AUDIO_MUTE,
+			   FIELD_PREP(AUDIO_DATA_IN_EN, audio_data_in_en) |
+			   FIELD_PREP(NUM_CHANNELS, dp->audio_channels - 1) |
+			   FIELD_PREP(AUDIO_DATA_WIDTH, dp->audio_sample_width) |
+			   FIELD_PREP(AUDIO_INF_SELECT, dp->audio_interface) |
+			   FIELD_PREP(HBR_MODE_ENABLE, 0) |
+			   FIELD_PREP(AUDIO_MUTE, dp->audio_muted));
+
+	/* Wait for inf switch */
+	usleep_range(20, 40);
+
+	/*
+	 * Send audio stream during vertical and horizontal blanking periods.
+	 * Send out audio timestamp SDP once per video frame during the vertical
+	 * blanking period
+	 */
+	regmap_update_bits(dp->regmap, DW_DP_SDP_VERTICAL_CTRL,
+			   EN_AUDIO_STREAM_SDP | EN_AUDIO_TIMESTAMP_SDP,
+			   FIELD_PREP(EN_AUDIO_STREAM_SDP, 1) |
+			   FIELD_PREP(EN_AUDIO_TIMESTAMP_SDP, 1));
+	regmap_update_bits(dp->regmap, DW_DP_SDP_HORIZONTAL_CTRL,
+			   EN_AUDIO_STREAM_SDP,
+			   FIELD_PREP(EN_AUDIO_STREAM_SDP, 1));
+
+	if (dp->audio_sdp_nr >= 0) {
+		dw_dp_clear_sdp(dp, dp->audio_sdp_nr);
+		dp->audio_sdp_nr = -1;
+	}
+
+	dp->audio_sdp_nr = dw_dp_audio_infoframe_send(dp);
+	if (dp->audio_sdp_nr < 0) {
+		dw_dp_audio_infoframe_clear(dp);
+		return dp->audio_sdp_nr;
+	}
+
+	return 0;
+}
+
+static int dw_dp_audio_startup(struct drm_bridge *bridge,
+			       struct drm_connector *connector)
+{
+	struct dw_dp *dp = bridge_to_dp(bridge);
+
+	dev_dbg(dp->dev, "audio startup\n");
+
+	return pm_runtime_get_active(dp->dev, RPM_TRANSPARENT);
+}
+
+static void dw_dp_audio_unprepare(struct drm_bridge *bridge,
+				  struct drm_connector *connector)
+{
+	struct dw_dp *dp = bridge_to_dp(bridge);
+
+	guard(mutex)(&dp->audio_lock);
+
+	__dw_dp_audio_disable(dp);
+}
+
+static int dw_dp_audio_prepare(struct drm_bridge *bridge,
+			       struct drm_connector *connector,
+			       struct hdmi_codec_daifmt *daifmt,
+			       struct hdmi_codec_params *params)
+{
+	struct dw_dp *dp = bridge_to_dp(bridge);
+	u8 supported_audio_interfaces;
+	enum dw_dp_audio_interface audio_interface;
+	u32 cfg1;
+	int ret;
+
+	guard(mutex)(&dp->audio_lock);
+
+	/*
+	 * prepare might be called multiple times, so release the clocks
+	 * from previous calls to keep the calls in balance.
+	 */
+	if (dp->audio_interface != DW_DP_AUDIO_UNUSED)
+		__dw_dp_audio_disable(dp);
+
+	/* The hardware is limited to 1,2 or 8 channels */
+	switch (params->cea.channels) {
+	case 1:
+	case 2:
+	case 8:
+		break;
+	default:
+		dev_err(dp->dev, "invalid audio channels %d\n", params->cea.channels);
+		return -EINVAL;
+	}
+
+	if (params->sample_width < 16 || params->sample_width > 24) {
+		dev_err(dp->dev, "invalid data sample width %d\n", params->sample_width);
+		return -EINVAL;
+	}
+
+	switch (daifmt->fmt) {
+	case HDMI_SPDIF:
+		audio_interface = DW_DP_AUDIO_SPDIF;
+		break;
+	case HDMI_I2S:
+		/*
+		 * It is recommended to use SPDIF instead of I2S, since I2S mode requires
+		 * manually inserting PCUV control bits from userspace and this is done
+		 * automatically in hardware for SPDIF mode.
+		 */
+		audio_interface = DW_DP_AUDIO_I2S;
+		break;
+	default:
+		dev_err(dp->dev, "invalid DAI format %d\n", daifmt->fmt);
+		return -EINVAL;
+	}
+
+	regmap_read(dp->regmap, DW_DP_CONFIG_REG1, &cfg1);
+	supported_audio_interfaces = FIELD_GET(AUDIO_SELECT, cfg1);
+
+	if (supported_audio_interfaces != DW_DP_AUDIO_I2S_AND_SPDIF &&
+	    supported_audio_interfaces != audio_interface) {
+		dev_err(dp->dev, "unsupported DAI %d\n", daifmt->fmt);
+		return -EINVAL;
+	}
+
+	ret = clk_prepare_enable(dp->spdif_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(dp->i2s_clk);
+	if (ret) {
+		clk_disable_unprepare(dp->spdif_clk);
+		return ret;
+	}
+
+	if (audio_interface == DW_DP_AUDIO_I2S)
+		clk_disable_unprepare(dp->spdif_clk);
+	else if (audio_interface == DW_DP_AUDIO_SPDIF)
+		clk_disable_unprepare(dp->i2s_clk);
+
+	dp->audio_channels = params->cea.channels;
+	dp->audio_channel_allocation = params->cea.channel_allocation;
+	dp->audio_sample_width = params->sample_width;
+	dp->audio_interface = audio_interface;
+
+	ret = __dw_dp_audio_enable(dp);
+	if (ret < 0) {
+		dev_err(dp->dev, "failed to enable audio\n");
+		__dw_dp_audio_disable(dp);
+		return ret;
+	}
+
+	dev_dbg(dp->dev, "audio prepare with %d channels using DAI=%d\n",
+		dp->audio_channels, dp->audio_interface);
+
+	return 0;
+}
+
+static void dw_dp_audio_shutdown(struct drm_bridge *bridge,
+				 struct drm_connector *connector)
+{
+	struct dw_dp *dp = bridge_to_dp(bridge);
+
+	dev_dbg(dp->dev, "audio shutdown\n");
+
+	dw_dp_audio_unprepare(bridge, connector);
+	pm_runtime_put_autosuspend(dp->dev);
+}
+
+static int dw_dp_audio_mute_stream(struct drm_bridge *bridge,
+				   struct drm_connector *connector,
+				   bool enable, int direction)
+{
+	struct dw_dp *dp = bridge_to_dp(bridge);
+
+	dev_dbg(dp->dev, "audio %smute\n", enable ? "" : "un");
+
+	guard(mutex)(&dp->audio_lock);
+
+	dp->audio_muted = enable;
+
+	regmap_update_bits(dp->regmap, DW_DP_AUD_CONFIG1, AUDIO_MUTE,
+			   FIELD_PREP(AUDIO_MUTE, enable));
+
+	return 0;
+}
+
 static void dw_dp_bridge_atomic_enable(struct drm_bridge *bridge,
 				       struct drm_atomic_commit *state)
 {
@@ -1734,12 +2020,22 @@ static void dw_dp_bridge_atomic_enable(struct drm_bridge *bridge,
 		dev_err(dp->dev, "failed to enable video: %d\n", ret);
 		return;
 	}
+
+	scoped_guard(mutex, &dp->audio_lock) {
+		if (dp->audio_interface != DW_DP_AUDIO_UNUSED) {
+			ret = __dw_dp_audio_enable(dp);
+			if (ret < 0)
+				dev_err(dp->dev, "failed to restore audio: %d\n", ret);
+		}
+	}
 }
 
 static void dw_dp_reset(struct dw_dp *dp)
 {
 	int val;
 
+	guard(mutex)(&dp->audio_lock);
+
 	disable_irq(dp->irq);
 	regmap_update_bits(dp->regmap, DW_DP_SOFT_RESET_CTRL, CONTROLLER_RESET,
 			   FIELD_PREP(CONTROLLER_RESET, 1));
@@ -2038,6 +2334,11 @@ static const struct drm_bridge_funcs dw_dp_bridge_funcs = {
 	.detect = dw_dp_bridge_detect,
 	.edid_read = dw_dp_bridge_edid_read,
 	.oob_notify = dw_dp_bridge_oob_notify,
+
+	.dp_audio_startup = dw_dp_audio_startup,
+	.dp_audio_prepare = dw_dp_audio_prepare,
+	.dp_audio_shutdown = dw_dp_audio_shutdown,
+	.dp_audio_mute_stream = dw_dp_audio_mute_stream,
 };
 
 static int dw_dp_link_retrain(struct dw_dp *dp)
@@ -2252,6 +2553,10 @@ int dw_dp_probe(struct dw_dp *dp)
 	if (ret)
 		return ret;
 
+	ret = devm_mutex_init(dev, &dp->audio_lock);
+	if (ret)
+		return ret;
+
 	res = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(res))
 		return PTR_ERR(res);
@@ -2368,12 +2673,21 @@ int dw_dp_probe(struct dw_dp *dp)
 		return ret;
 
 	dp->vsc_sdp_nr = -1;
+	dp->audio_interface = DW_DP_AUDIO_UNUSED;
+	dp->audio_sdp_nr = -1;
 
 	bridge = &dp->bridge;
 	bridge->of_node = dev->of_node;
-	bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID | DRM_BRIDGE_OP_HPD;
+	bridge->ops = DRM_BRIDGE_OP_DP_AUDIO |
+		      DRM_BRIDGE_OP_DETECT |
+		      DRM_BRIDGE_OP_EDID |
+		      DRM_BRIDGE_OP_HPD;
 	bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
 	bridge->ycbcr_420_allowed = true;
+	bridge->hdmi_audio_dev = dev;
+	bridge->hdmi_audio_max_i2s_playback_channels = 8;
+	bridge->hdmi_audio_dai_port = 1;
+	bridge->hdmi_audio_spdif_playback = true;
 
 	return devm_drm_bridge_add(dev, bridge);
 }

-- 
2.53.0