From: Alexander Dahl <ada@thorsis.com>
To: Claudiu Beznea <claudiu.beznea@kernel.org>
Cc: Alexander Dahl <ada@thorsis.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
"open list:USB SUBSYSTEM" <linux-usb@vger.kernel.org>
Subject: Re: [PATCH v4 02/16] dt-bindings: clock: at91: Split up per SoC partially
Date: Thu, 19 Nov 2026 15:46:12 +0100 [thread overview]
Message-ID: <20261119-bruising-peroxide-4f2c3211155a@thorsis.com> (raw)
In-Reply-To: <0f0cc1da-46dc-431e-a10d-dcbbf7419960@kernel.org>
Hello Claudiu,
Am Sun, Nov 15, 2026 at 04:35:23PM +0200 schrieb Claudiu Beznea:
> Hi, Alexaner,
>
> On 11/5/26 13:06, Alexander Dahl wrote:
> > Before adding even more new indexes creating more holes in the
> > clk at91 drivers pmc_data->chws arrays, split this up.
> >
> > This is a partial split up only for some of the old PMC definitions.
> >
> > Binding splitup was proposed for several reasons:
> >
> > 1) keep the driver code simple, readable, and efficient
> > 2) avoid accidental array index duplication
> > 3) avoid memory waste by creating more and more unused array members.
> >
> > Old values are kept to not break dts, and to maintain dt ABI.
> >
> > Link: https://lore.kernel.org/linux-devicetree/20250207-jailbird-circus-bcc04ee90e05@thorsis.com/T/#u
> > Signed-off-by: Alexander Dahl <ada@thorsis.com>
> > ---
> >
> > Notes:
> > v4:
> > - "re-added" some definitions present in hardware but not used in dt
> > - reword header comment (at91 -> Microchip) for newer SoCs
> > - PMC_UTMI was renamed where appropriate according to datasheets
> > v3:
> > - full splitup for all at91 family SoCs instead of just a few
> > v2:
> > - new patch, not present in v1
> >
> > .../reset/atmel,at91sam9260-reset.yaml | 3 ++-
> > .../bindings/usb/atmel,at91sam9rl-udc.yaml | 3 ++-
> > .../dt-bindings/clock/atmel,at91rm9200-pmc.h | 16 ++++++++++++
> > .../dt-bindings/clock/atmel,at91sam9260-pmc.h | 16 ++++++++++++
> > .../dt-bindings/clock/atmel,at91sam9g45-pmc.h | 16 ++++++++++++
> > .../dt-bindings/clock/atmel,at91sam9n12-pmc.h | 16 ++++++++++++
> > .../dt-bindings/clock/atmel,at91sam9rl-pmc.h | 16 ++++++++++++
> > .../dt-bindings/clock/atmel,at91sam9x5-pmc.h | 16 ++++++++++++
> > include/dt-bindings/clock/atmel,sama5d2-pmc.h | 20 ++++++++++++++
> > include/dt-bindings/clock/atmel,sama5d3-pmc.h | 16 ++++++++++++
> > include/dt-bindings/clock/atmel,sama5d4-pmc.h | 17 ++++++++++++
> > .../dt-bindings/clock/microchip,sam9x60-pmc.h | 15 +++++++++++
> > .../dt-bindings/clock/microchip,sam9x7-pmc.h | 19 ++++++++++++++
> > .../clock/microchip,sama7d65-pmc.h | 26 +++++++++++++++++++
> > .../dt-bindings/clock/microchip,sama7g5-pmc.h | 23 ++++++++++++++++
> > 15 files changed, 236 insertions(+), 2 deletions(-)
> > create mode 100644 include/dt-bindings/clock/atmel,at91rm9200-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,at91sam9260-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,at91sam9g45-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,at91sam9n12-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,at91sam9rl-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,at91sam9x5-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,sama5d2-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,sama5d3-pmc.h
> > create mode 100644 include/dt-bindings/clock/atmel,sama5d4-pmc.h
> > create mode 100644 include/dt-bindings/clock/microchip,sam9x60-pmc.h
> > create mode 100644 include/dt-bindings/clock/microchip,sam9x7-pmc.h
> > create mode 100644 include/dt-bindings/clock/microchip,sama7d65-pmc.h
> > create mode 100644 include/dt-bindings/clock/microchip,sama7g5-pmc.h
> >
> > diff --git a/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
> > index 84c4801df8d9a..8c89ccc3d6393 100644
> > --- a/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
> > +++ b/Documentation/devicetree/bindings/reset/atmel,at91sam9260-reset.yaml
> > @@ -67,9 +67,10 @@ additionalProperties: false
> > examples:
> > - |
> > #include <dt-bindings/clock/at91.h>
> > + #include <dt-bindings/clock/atmel,at91sam9260-pmc.h>
> > reset-controller@fffffd00 {
> > compatible = "atmel,at91sam9260-rstc";
> > reg = <0xfffffd00 0x10>;
> > - clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
> > + clocks = <&pmc PMC_TYPE_CORE AT91SAM9260_PMC_SLOW>;
> > };
> > diff --git a/Documentation/devicetree/bindings/usb/atmel,at91sam9rl-udc.yaml b/Documentation/devicetree/bindings/usb/atmel,at91sam9rl-udc.yaml
> > index cdbbd17f80363..15f5bb51fd8a7 100644
> > --- a/Documentation/devicetree/bindings/usb/atmel,at91sam9rl-udc.yaml
> > +++ b/Documentation/devicetree/bindings/usb/atmel,at91sam9rl-udc.yaml
> > @@ -61,13 +61,14 @@ examples:
> > - |
> > #include <dt-bindings/interrupt-controller/irq.h>
> > #include <dt-bindings/clock/at91.h>
> > + #include <dt-bindings/clock/atmel,at91sam9rl-pmc.h>
> > #include <dt-bindings/gpio/gpio.h>
> > gadget@fff78000 {
> > compatible = "atmel,at91sam9g45-udc";
> > reg = <0x00600000 0x80000
> > 0xfff78000 0x400>;
> > interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
> > - clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE AT91SAM9RL_PMC_UTMI>;
> > clock-names = "pclk", "hclk";
> > atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
> > };
> > diff --git a/include/dt-bindings/clock/atmel,at91rm9200-pmc.h b/include/dt-bindings/clock/atmel,at91rm9200-pmc.h
> > new file mode 100644
> > index 0000000000000..35fce34e00b82
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,at91rm9200-pmc.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91rm9200 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_AT91RM9200_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_AT91RM9200_PMC_H
> > +
> > +#define AT91RM9200_PMC_SLOW 0
>
> This is not used anywhere anywhere accross the current code base. Let's drop it.
Fine. I added this after your feedback on v3 of the series [1],
probably misinterpreted what you meant. v5 will be reduced by some
definitions again and keep the PLLs in the sama7 SoCs.
> > +#define AT91RM9200_PMC_MCK 1
> > +#define AT91RM9200_PMC_MAIN 3
> > +#define AT91RM9200_PMC_PLLACK 7
> > +#define AT91RM9200_PMC_PLLBCK 8
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,at91sam9260-pmc.h b/include/dt-bindings/clock/atmel,at91sam9260-pmc.h
> > new file mode 100644
> > index 0000000000000..6a5453cf70954
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,at91sam9260-pmc.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91sam9260 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9260_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9260_PMC_H
> > +
> > +#define AT91SAM9260_PMC_SLOW 0
> > +#define AT91SAM9260_PMC_MCK 1
> > +#define AT91SAM9260_PMC_MAIN 3
> > +#define AT91SAM9260_PMC_PLLACK 7
> > +#define AT91SAM9260_PMC_PLLBCK 8
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,at91sam9g45-pmc.h b/include/dt-bindings/clock/atmel,at91sam9g45-pmc.h
> > new file mode 100644
> > index 0000000000000..44a804ff96fff
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,at91sam9g45-pmc.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91sam9g45 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9G45_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9G45_PMC_H
> > +
> > +#define AT91SAM9G45_PMC_SLOW 0
>
> This is not used. Lets introduce it when needed
>
> > +#define AT91SAM9G45_PMC_MCK 1
> > +#define AT91SAM9G45_PMC_UPLLCK 2
> > +#define AT91SAM9G45_PMC_MAIN 3
> > +#define AT91SAM9G45_PMC_PLLACK 7
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,at91sam9n12-pmc.h b/include/dt-bindings/clock/atmel,at91sam9n12-pmc.h
> > new file mode 100644
> > index 0000000000000..6eaef69242ee8
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,at91sam9n12-pmc.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91sam9n12 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9N12_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9N12_PMC_H
> > +
> > +#define AT91SAM9N12_PMC_SLOW 0
>
> Not used.
>
> > +#define AT91SAM9N12_PMC_MCK 1
> > +#define AT91SAM9N12_PMC_MAIN 3
> > +#define AT91SAM9N12_PMC_PLLACK 7
> > +#define AT91SAM9N12_PMC_PLLBCK 8
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,at91sam9rl-pmc.h b/include/dt-bindings/clock/atmel,at91sam9rl-pmc.h
> > new file mode 100644
> > index 0000000000000..0bb195712f785
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,at91sam9rl-pmc.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91sam9rl clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9RL_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9RL_PMC_H
> > +
> > +#define AT91SAM9RL_PMC_SLOW 0
>
> Not used.
>
> > +#define AT91SAM9RL_PMC_MCK 1
> > +#define AT91SAM9RL_PMC_UTMI 2
>
> Manual also refers to this as UPLL (UTMI PLL). E.g.
>
> "26.5 Main Oscillator
> The Main Oscillator is designed for a 12 MHz fundamental crystal. The 12 MHz
> is also used to
> generate the 480 MHz USB High Speed Clock (HSCK) thanks to the UTMI PLL (UPLL)."
>
> [1] https://ww1.microchip.com/downloads/en/DeviceDoc/doc6289.pdf
Well, that old datasheet is full of variants for this, we have UPLL,
HSCK, UTMI PLL, USBHSCK, and UTMI Clock. I rename it to
AT91SAM9RL_PMC_UPLLCK so it is in line with the other old SoCs.
>
> > +#define AT91SAM9RL_PMC_MAIN 3
> > +#define AT91SAM9RL_PMC_PLLACK 7
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,at91sam9x5-pmc.h b/include/dt-bindings/clock/atmel,at91sam9x5-pmc.h
> > new file mode 100644
> > index 0000000000000..d095dcc9b29ff
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,at91sam9x5-pmc.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91sam9x5 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9X5_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_AT91SAM9X5_PMC_H
> > +
> > +#define AT91SAM9X5_PMC_SLOW 0
>
> Not used.
>
> > +#define AT91SAM9X5_PMC_MCK 1
> > +#define AT91SAM9X5_PMC_UPLLCK 2
> > +#define AT91SAM9X5_PMC_MAIN 3
> > +#define AT91SAM9X5_PMC_PLLACK 7
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,sama5d2-pmc.h b/include/dt-bindings/clock/atmel,sama5d2-pmc.h
> > new file mode 100644
> > index 0000000000000..51bb410c699e2
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,sama5d2-pmc.h
> > @@ -0,0 +1,20 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91 sama5d2 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_SAMA5D2_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_SAMA5D2_PMC_H
> > +
> > +#define SAMA5D2_PMC_MCK 1
> > +#define SAMA5D2_PMC_UPLLCK 2
> > +#define SAMA5D2_PMC_MAIN 3
> > +#define SAMA5D2_PMC_MCK2 4
> > +#define SAMA5D2_PMC_I2S0_MUX 5
> > +#define SAMA5D2_PMC_I2S1_MUX 6
> > +#define SAMA5D2_PMC_PLLACK 7
> > +#define SAMA5D2_PMC_AUDIOPLLCK 9
> > +#define SAMA5D2_PMC_AUDIOPINCK 10
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,sama5d3-pmc.h b/include/dt-bindings/clock/atmel,sama5d3-pmc.h
> > new file mode 100644
> > index 0000000000000..92210969104d6
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,sama5d3-pmc.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91 sama5d3 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_SAMA5D3_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_SAMA5D3_PMC_H
> > +
> > +#define SAMA5D3_PMC_SLOW 0
>
> Not used.
>
> > +#define SAMA5D3_PMC_MCK 1
> > +#define SAMA5D3_PMC_UPLLCK 2
> > +#define SAMA5D3_PMC_MAIN 3
>
> Not used.
>
> > +#define SAMA5D3_PMC_PLLACK 7
> > +
> > +#endif
> > diff --git a/include/dt-bindings/clock/atmel,sama5d4-pmc.h b/include/dt-bindings/clock/atmel,sama5d4-pmc.h
> > new file mode 100644
> > index 0000000000000..53870448d6a1d
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/atmel,sama5d4-pmc.h
> > @@ -0,0 +1,17 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * The constants defined in this header are being used in dts and in
> > + * at91 sama5d4 clock driver.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_CLOCK_ATMEL_SAMA5D4_PMC_H
> > +#define _DT_BINDINGS_CLOCK_ATMEL_SAMA5D4_PMC_H
> > +
> > +#define SAMA5D4_PMC_SLOW 0
>
> Not used.
>
> > +#define SAMA5D4_PMC_MCK 1
> > +#define SAMA5D4_PMC_UPLLCK 2
> > +#define SAMA5D4_PMC_MAIN 3
>
> Not used.
>
> Thank you,
> Claudiu
Thanks for your review.
Greets
Alex
[1] https://lore.kernel.org/linux-devicetree/1f25e668-ff04-4fa7-a7fd-3ed3286edbe6@tuxon.dev/
next prev parent reply other threads:[~2026-11-19 14:46 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 11:06 [PATCH v4 00/16] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 01/16] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 02/16] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-11-06 10:57 ` Krzysztof Kozlowski
2026-11-06 11:02 ` Alexander Dahl
2026-11-15 14:35 ` Claudiu Beznea
2026-11-19 14:46 ` Alexander Dahl [this message]
2026-11-05 11:06 ` [PATCH v4 03/16] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-11-06 11:03 ` Krzysztof Kozlowski
2026-11-15 14:34 ` Claudiu Beznea
2026-11-19 14:53 ` Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 04/16] clk: at91: Use new per SoC PMC clock index definitions Alexander Dahl
2026-11-15 14:29 ` Claudiu Beznea
2026-11-05 11:06 ` [PATCH v4 05/16] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-11-06 2:39 ` kernel test robot
2026-11-05 11:06 ` [PATCH v4 06/16] clk: at91: Add peripheral clock id for OTPC Alexander Dahl
2026-11-15 14:28 ` Claudiu Beznea
2026-11-05 11:06 ` [PATCH v4 07/16] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-11-06 11:05 ` Krzysztof Kozlowski
2026-11-05 11:06 ` [PATCH v4 08/16] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 09/16] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 10/16] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 11/16] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-11-15 14:28 ` Claudiu Beznea
2026-11-05 11:06 ` [PATCH v4 12/16] ARM: dts: microchip: Use new per SoC PMC bindings Alexander Dahl
2026-11-15 14:28 ` Claudiu Beznea
2026-11-05 11:06 ` [PATCH v4 13/16] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-11-15 14:27 ` Claudiu Beznea
2026-11-05 11:06 ` [PATCH v4 14/16] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-11-15 14:35 ` claudiu beznea
2026-11-05 11:06 ` [PATCH v4 15/16] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-11-15 14:27 ` Claudiu Beznea
2026-11-19 15:17 ` Alexander Dahl
2026-11-05 11:06 ` [PATCH v4 16/16] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl
2026-11-15 14:22 ` Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119-bruising-peroxide-4f2c3211155a@thorsis.com \
--to=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=bmasney+clk@redhat.com \
--cc=claudiu.beznea@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=ryan.wanner@microchip.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®