From: <Ryan.Wanner@microchip.com>
To: <mturquette@baylibre.com>, <sboyd@kernel.org>,
<alexandre.belloni@bootlin.com>, <claudiu.beznea@tuxon.dev>,
<nicolas.ferre@microchip.com>
Cc: <linux-clk@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<varshini.rajendran@microchip.com>
Subject: [PATCH v4 04/31] clk: at91: clk-sam9x60-pll: use clk_parent_data
Date: Thu, 18 Sep 2025 14:15:46 -0700 [thread overview]
Message-ID: <259824455f5325b35d0fb85163866a81ff24304e.1758226719.git.Ryan.Wanner@microchip.com> (raw)
In-Reply-To: <cover.1758226719.git.Ryan.Wanner@microchip.com>
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Use struct clk_parent_data instead of struct parent_hw as this leads
to less usage of __clk_get_hw() in SoC specific clock drivers and simpler
conversion of existing SoC specific clock drivers from parent_names to
modern clk_parent_data structures. As clk-sam9x60-pll need to know
parent's rate at initialization we pass it now from SoC specific drivers.
This will lead in the end at removing __clk_get_hw() in SoC specific
drivers (that will be solved by subsequent commits).
Get the main_xtal name via of_clk_get_parent_name() to consistently get
the correct name for the main_xtal.
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
[ryan.wanner@microchip.com: Add SAMA7D65 and SAM9X75 SoCs to the change set.]
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
---
drivers/clk/at91/clk-sam9x60-pll.c | 14 +++++---------
drivers/clk/at91/pmc.h | 5 +++--
drivers/clk/at91/sam9x60.c | 8 +++++---
drivers/clk/at91/sam9x7.c | 16 +++++++++++-----
drivers/clk/at91/sama7d65.c | 25 ++++++++++++++-----------
drivers/clk/at91/sama7g5.c | 26 +++++++++++++++-----------
6 files changed, 53 insertions(+), 41 deletions(-)
diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
index 3dc75a394ce1..9895881c67d7 100644
--- a/drivers/clk/at91/clk-sam9x60-pll.c
+++ b/drivers/clk/at91/clk-sam9x60-pll.c
@@ -630,19 +630,19 @@ static const struct clk_ops sam9x60_fixed_div_pll_ops = {
struct clk_hw * __init
sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
- const char *name, const char *parent_name,
- struct clk_hw *parent_hw, u8 id,
+ const char *name, const struct clk_parent_data *parent_data,
+ unsigned long parent_rate, u8 id,
const struct clk_pll_characteristics *characteristics,
const struct clk_pll_layout *layout, u32 flags)
{
struct sam9x60_frac *frac;
struct clk_hw *hw;
struct clk_init_data init = {};
- unsigned long parent_rate, irqflags;
+ unsigned long irqflags;
unsigned int val;
int ret;
- if (id > PLL_MAX_ID || !lock || !parent_hw)
+ if (id > PLL_MAX_ID || !lock || !parent_data)
return ERR_PTR(-EINVAL);
frac = kzalloc(sizeof(*frac), GFP_KERNEL);
@@ -650,10 +650,7 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
return ERR_PTR(-ENOMEM);
init.name = name;
- if (parent_name)
- init.parent_names = &parent_name;
- else
- init.parent_hws = (const struct clk_hw **)&parent_hw;
+ init.parent_data = (const struct clk_parent_data *)parent_data;
init.num_parents = 1;
if (flags & CLK_SET_RATE_GATE)
init.ops = &sam9x60_frac_pll_ops;
@@ -684,7 +681,6 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
* its rate leading to enabling this PLL with unsupported
* rate. This will lead to PLL not being locked at all.
*/
- parent_rate = clk_hw_get_rate(parent_hw);
if (!parent_rate) {
hw = ERR_PTR(-EINVAL);
goto free;
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 16c2559889aa..d3fc38cf90eb 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -258,8 +258,9 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
struct clk_hw * __init
sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
- const char *name, const char *parent_name,
- struct clk_hw *parent_hw, u8 id,
+ const char *name,
+ const struct clk_parent_data *parent_data,
+ unsigned long parent_rate, u8 id,
const struct clk_pll_characteristics *characteristics,
const struct clk_pll_layout *layout, u32 flags);
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index 18baf4a256f4..bee35c65aceb 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -242,7 +242,8 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
sam9x60_pmc->chws[PMC_MAIN] = hw;
hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "pllack_fracck",
- "mainck", sam9x60_pmc->chws[PMC_MAIN],
+ &AT91_CLK_PD_HW(sam9x60_pmc->chws[PMC_MAIN]),
+ clk_hw_get_rate(sam9x60_pmc->chws[PMC_MAIN]),
0, &plla_characteristics,
&pll_frac_layout,
/*
@@ -268,8 +269,9 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
sam9x60_pmc->chws[PMC_PLLACK] = hw;
hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "upllck_fracck",
- "main_osc", main_osc_hw, 1,
- &upll_characteristics,
+ &AT91_CLK_PD_HW(main_osc_hw),
+ clk_hw_get_rate(main_osc_hw),
+ 1, &upll_characteristics,
&pll_frac_layout, CLK_SET_RATE_GATE);
if (IS_ERR(hw))
goto err_free;
diff --git a/drivers/clk/at91/sam9x7.c b/drivers/clk/at91/sam9x7.c
index cb5849da494f..c80306715d90 100644
--- a/drivers/clk/at91/sam9x7.c
+++ b/drivers/clk/at91/sam9x7.c
@@ -752,6 +752,7 @@ static void __init sam9x7_pmc_setup(struct device_node *np)
struct regmap *regmap;
struct clk_hw *hw, *main_rc_hw, *main_osc_hw, *main_xtal_hw;
struct clk_hw *td_slck_hw, *md_slck_hw, *usbck_hw;
+ static struct clk_parent_data parent_data;
struct clk_hw *parent_hws[9];
int i, j;
@@ -799,7 +800,7 @@ static void __init sam9x7_pmc_setup(struct device_node *np)
for (i = 0; i < PLL_ID_MAX; i++) {
for (j = 0; j < PLL_COMPID_MAX; j++) {
- struct clk_hw *parent_hw;
+ unsigned long parent_rate;
if (!sam9x7_plls[i][j].n)
continue;
@@ -808,21 +809,26 @@ static void __init sam9x7_pmc_setup(struct device_node *np)
case PLL_TYPE_FRAC:
switch (sam9x7_plls[i][j].p) {
case SAM9X7_PLL_PARENT_MAINCK:
- parent_hw = sam9x7_pmc->chws[PMC_MAIN];
+ parent_data = AT91_CLK_PD_NAME("mainck");
+ hw = sam9x7_pmc->chws[PMC_MAIN];
break;
case SAM9X7_PLL_PARENT_MAIN_XTAL:
- parent_hw = main_xtal_hw;
+ parent_data = AT91_CLK_PD_NAME(main_xtal_name);
+ hw = main_xtal_hw;
break;
default:
/* Should not happen. */
- parent_hw = NULL;
break;
}
+ parent_rate = clk_hw_get_rate(hw);
+ if (!parent_rate)
+ return;
+
hw = sam9x60_clk_register_frac_pll(regmap,
&pmc_pll_lock,
sam9x7_plls[i][j].n,
- NULL, parent_hw, i,
+ &parent_data, parent_rate, i,
sam9x7_plls[i][j].c,
sam9x7_plls[i][j].l,
sam9x7_plls[i][j].f);
diff --git a/drivers/clk/at91/sama7d65.c b/drivers/clk/at91/sama7d65.c
index ec2ef1a0249a..6229b7dfbea1 100644
--- a/drivers/clk/at91/sama7d65.c
+++ b/drivers/clk/at91/sama7d65.c
@@ -1093,7 +1093,7 @@ static const struct clk_pcr_layout sama7d65_pcr_layout = {
static void __init sama7d65_pmc_setup(struct device_node *np)
{
- const char *main_xtal_name = "main_xtal";
+ const char *main_xtal_name;
struct pmc_data *sama7d65_pmc;
const char *parent_names[11];
void **alloc_mem = NULL;
@@ -1108,10 +1108,11 @@ static void __init sama7d65_pmc_setup(struct device_node *np)
td_slck_hw = __clk_get_hw(of_clk_get_by_name(np, "td_slck"));
md_slck_hw = __clk_get_hw(of_clk_get_by_name(np, "md_slck"));
- main_xtal_hw = __clk_get_hw(of_clk_get_by_name(np, main_xtal_name));
+ i = of_property_match_string(np, "clock-names", "main_xtal");
- if (!td_slck_hw || !md_slck_hw || !main_xtal_hw)
+ if (!td_slck_hw || !md_slck_hw || !i)
return;
+ main_xtal_name = of_clk_get_parent_name(np, i);
regmap = device_node_to_regmap(np);
if (IS_ERR(regmap))
@@ -1137,10 +1138,8 @@ static void __init sama7d65_pmc_setup(struct device_node *np)
bypass = of_property_read_bool(np, "atmel,osc-bypass");
- parent_data.name = main_xtal_name;
- parent_data.fw_name = main_xtal_name;
main_osc_hw = at91_clk_register_main_osc(regmap, "main_osc", NULL,
- &parent_data, bypass);
+ &AT91_CLK_PD_NAME(main_xtal_name), bypass);
if (IS_ERR(main_osc_hw))
goto err_free;
@@ -1154,7 +1153,7 @@ static void __init sama7d65_pmc_setup(struct device_node *np)
for (i = 0; i < PLL_ID_MAX; i++) {
for (j = 0; j < PLL_COMPID_MAX; j++) {
- struct clk_hw *parent_hw;
+ unsigned long parent_rate;
if (!sama7d65_plls[i][j].n)
continue;
@@ -1163,20 +1162,24 @@ static void __init sama7d65_pmc_setup(struct device_node *np)
case PLL_TYPE_FRAC:
switch (sama7d65_plls[i][j].p) {
case SAMA7D65_PLL_PARENT_MAINCK:
- parent_hw = sama7d65_pmc->chws[PMC_MAIN];
+ parent_data = AT91_CLK_PD_NAME("mainck");
+ hw = sama7d65_pmc->chws[PMC_MAIN];
break;
case SAMA7D65_PLL_PARENT_MAIN_XTAL:
- parent_hw = main_xtal_hw;
+ parent_data = AT91_CLK_PD_NAME(main_xtal_name);
+ hw = main_xtal_hw;
break;
default:
/* Should not happen. */
- parent_hw = NULL;
break;
}
+ parent_rate = clk_hw_get_rate(hw);
+ if (!parent_rate)
+ return;
hw = sam9x60_clk_register_frac_pll(regmap,
&pmc_pll_lock, sama7d65_plls[i][j].n,
- NULL, parent_hw, i,
+ &parent_data, parent_rate, i,
sama7d65_plls[i][j].c,
sama7d65_plls[i][j].l,
sama7d65_plls[i][j].f);
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 713f5dfe7be2..654c9f43fcf8 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -971,7 +971,7 @@ static const struct clk_pcr_layout sama7g5_pcr_layout = {
static void __init sama7g5_pmc_setup(struct device_node *np)
{
- const char *main_xtal_name = "main_xtal";
+ const char *main_xtal_name;
struct pmc_data *sama7g5_pmc;
void **alloc_mem = NULL;
int alloc_mem_size = 0;
@@ -985,10 +985,11 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
td_slck_hw = __clk_get_hw(of_clk_get_by_name(np, "td_slck"));
md_slck_hw = __clk_get_hw(of_clk_get_by_name(np, "md_slck"));
- main_xtal_hw = __clk_get_hw(of_clk_get_by_name(np, main_xtal_name));
+ i = of_property_match_string(np, "clock-names", "main_xtal");
- if (!td_slck_hw || !md_slck_hw || !main_xtal_hw)
+ if (!td_slck_hw || !md_slck_hw || !i)
return;
+ main_xtal_name = of_clk_get_parent_name(np, i);
regmap = device_node_to_regmap(np);
if (IS_ERR(regmap))
@@ -1014,10 +1015,8 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
bypass = of_property_read_bool(np, "atmel,osc-bypass");
- parent_data.name = main_xtal_name;
- parent_data.fw_name = main_xtal_name;
main_osc_hw = at91_clk_register_main_osc(regmap, "main_osc", NULL,
- &parent_data, bypass);
+ &AT91_CLK_PD_NAME(main_xtal_name), bypass);
if (IS_ERR(main_osc_hw))
goto err_free;
@@ -1031,7 +1030,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
for (i = 0; i < PLL_ID_MAX; i++) {
for (j = 0; j < PLL_COMPID_MAX; j++) {
- struct clk_hw *parent_hw;
+ unsigned long parent_rate;
if (!sama7g5_plls[i][j].n)
continue;
@@ -1040,20 +1039,25 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
case PLL_TYPE_FRAC:
switch (sama7g5_plls[i][j].p) {
case SAMA7G5_PLL_PARENT_MAINCK:
- parent_hw = sama7g5_pmc->chws[PMC_MAIN];
+ parent_data = AT91_CLK_PD_NAME("mainck");
+ hw = sama7g5_pmc->chws[PMC_MAIN];
break;
case SAMA7G5_PLL_PARENT_MAIN_XTAL:
- parent_hw = main_xtal_hw;
+ parent_data = AT91_CLK_PD_NAME(main_xtal_name);
+ hw = main_xtal_hw;
break;
default:
/* Should not happen. */
- parent_hw = NULL;
break;
}
+ parent_rate = clk_hw_get_rate(hw);
+ if (!parent_rate)
+ return;
+
hw = sam9x60_clk_register_frac_pll(regmap,
&pmc_pll_lock, sama7g5_plls[i][j].n,
- NULL, parent_hw, i,
+ &parent_data, parent_rate, i,
sama7g5_plls[i][j].c,
sama7g5_plls[i][j].l,
sama7g5_plls[i][j].f);
--
2.43.0
next prev parent reply other threads:[~2025-09-18 21:16 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-18 21:15 [PATCH v4 00/31] clk: at91: add support for parent_data and Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 01/31] clk: at91: pmc: add macros for clk_parent_data Ryan.Wanner
2025-10-20 19:40 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 02/31] clk: at91: pmc: Move macro to header file Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 03/31] clk: at91: sam9x75: switch to parent_hw and parent_data Ryan.Wanner
2025-10-20 19:38 ` Claudiu Beznea
2025-09-18 21:15 ` Ryan.Wanner [this message]
2025-10-20 19:41 ` [PATCH v4 04/31] clk: at91: clk-sam9x60-pll: use clk_parent_data Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 05/31] clk: at91: clk-peripheral: switch to clk_parent_data Ryan.Wanner
2025-10-20 19:41 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 06/31] clk: at91: clk-main: switch to clk parent data Ryan.Wanner
2025-10-20 19:42 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 07/31] clk: at91: clk-utmi: use clk_parent_data Ryan.Wanner
2025-10-20 19:43 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 08/31] clk: at91: clk-master: " Ryan.Wanner
2025-10-20 19:44 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 09/31] clk: at91: clk-programmable: " Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 10/31] clk: at91: clk-generated: " Ryan.Wanner
2025-10-20 19:39 ` Claudiu Beznea
2025-10-20 19:45 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 11/31] clk: at91: clk-usb: add support for clk_parent_data Ryan.Wanner
2025-10-20 19:17 ` Claudiu Beznea
2025-12-18 16:23 ` Ryan.Wanner
2025-12-23 14:00 ` claudiu beznea
2026-01-05 17:58 ` Ryan.Wanner
2026-01-10 15:03 ` Claudiu Beznea
2026-01-12 21:25 ` Ryan Wanner
2026-01-16 6:57 ` claudiu beznea
2025-09-18 21:15 ` [PATCH v4 12/31] clk: at91: clk-system: use clk_parent_data Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 13/31] clk: at91: sama7d65: switch to parent_hw and parent_data Ryan.Wanner
2025-10-20 19:14 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 14/31] clk: at91: clk-pll: add support for parent_hw Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 15/31] clk: at91: clk-audio-pll: " Ryan.Wanner
2025-09-18 21:15 ` [PATCH v4 16/31] clk: at91: clk-plldiv: " Ryan.Wanner
2025-10-20 19:12 ` Claudiu Beznea
2025-09-18 21:15 ` [PATCH v4 17/31] clk: at91: clk-h32mx: " Ryan.Wanner
2025-10-20 19:12 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 18/31] clk: at91: clk-i2s-mux: " Ryan.Wanner
2025-10-20 19:13 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 19/31] clk: at91: clk-smd: add support for clk_parent_data Ryan.Wanner
2025-10-20 19:14 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 20/31] clk: at91: clk-slow: add support for parent_hw Ryan.Wanner
2025-10-20 19:17 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 21/31] clk: at91: dt-compat: switch to parent_hw and parent_data Ryan.Wanner
2025-10-20 19:15 ` Claudiu Beznea
2026-01-09 17:03 ` Ryan Wanner
2026-01-10 15:07 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 22/31] clk: at91: sam9x60: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 23/31] clk: at91: sama5d2: " Ryan.Wanner
2025-10-20 19:19 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 24/31] clk: at91: sama5d3: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 25/31] clk: at91: sama5d4: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 26/31] clk: at91: at91sam9x5: " Ryan.Wanner
2025-10-20 19:19 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 27/31] clk: at91: at91rm9200: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 28/31] clk: at91: at91sam9260: " Ryan.Wanner
2025-10-20 19:35 ` Claudiu Beznea
2025-09-18 21:16 ` [PATCH v4 29/31] clk: at91: at91sam9g45: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 30/31] clk: at91: at91sam9n12: " Ryan.Wanner
2025-09-18 21:16 ` [PATCH v4 31/31] clk: at91: at91sam9rl: switch to clk_parent_data Ryan.Wanner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=259824455f5325b35d0fb85163866a81ff24304e.1758226719.git.Ryan.Wanner@microchip.com \
--to=ryan.wanner@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.ferre@microchip.com \
--cc=sboyd@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®