Re: [PATCH 1/2] arm64: dts: qcom: ipq5332: Move PHYs and PERST# to Root Port node

[Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>]

On 6/8/2026 3:52 PM, Konrad Dybcio wrote:
> On 6/2/26 6:34 PM, Kathiravan Thirumoorthy wrote:
>> Follow the new binding style by defining PHYs and PERST# (now RESET#)
>> under the Root Port node. Avoid mixing styles and move these properties
>> to the RP node.
>>
>> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
>> ---
> [...]
>
>>   
>> -			pcie@0 {
>> +			pcie1_port0: pcie@0 {
>>   				device_type = "pci";
>>   				reg = <0x0 0x0 0x0 0x0 0x0>;
>>   
>>   				#address-cells = <3>;
>>   				#size-cells = <2>;
>>   				ranges;
>> +				phys = <&pcie1_phy>;
> nit: other socs (like hamoa) do it like this:
>
> pcie3_port0: pcie@0 {
> 	device_type = "pci";
> 	compatible = "pciclass,0604";
> 	reg = <0x0 0x0 0x0 0x0 0x0>;
> 	bus-range = <0x01 0xff>;
>
> 	phys = <&pcie3_phy>;
>
> 	#address-cells = <3>;
> 	#size-cells = <2>;
> 	ranges;
> };

Ack. Let me add the 'bus-range' property and move the 'phys' next to it.

> Konrad