Re: [PATCH 1/2] arm64: dts: qcom: ipq5332: Move PHYs and PERST# to Root Port node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/2/26 6:34 PM, Kathiravan Thirumoorthy wrote:
> Follow the new binding style by defining PHYs and PERST# (now RESET#)
> under the Root Port node. Avoid mixing styles and move these properties
> to the RP node.
> 
> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
> ---

[...]

>  
> -			pcie@0 {
> +			pcie1_port0: pcie@0 {
>  				device_type = "pci";
>  				reg = <0x0 0x0 0x0 0x0 0x0>;
>  
>  				#address-cells = <3>;
>  				#size-cells = <2>;
>  				ranges;
> +				phys = <&pcie1_phy>;

nit: other socs (like hamoa) do it like this:

pcie3_port0: pcie@0 {
	device_type = "pci";
	compatible = "pciclass,0604";
	reg = <0x0 0x0 0x0 0x0 0x0>;
	bus-range = <0x01 0xff>;

	phys = <&pcie3_phy>;

	#address-cells = <3>;
	#size-cells = <2>;
	ranges;
};

Konrad