[PATCH] fsb ecc don't work correctly on any intel cpu but the xeon! fixed.

[PATCH] fsb ecc don't work correctly on any intel cpu but the xeon! fixed.

[Konstantin Olifer]

Hello,

Kernel 2.6.32 e752x_edac suppose that fsb ECC exist, for example, on
Celeron + 3100. That is wrong. ECC FSB supported only on Xeon for our
vision and datasheet from developer intel www. Fixed.

Thank you.

Wish a Happy Christmas and Happy New Year!


Best regards,
Konstantin




--- ./linux-2.6.32/drivers/edac/e752x_edac.c.orig	2009-12-03
06:51:21.000000000 +0300
+++ ./linux-2.6.32/drivers/edac/e752x_edac.c	2009-12-26 16:29:14.000000000 +0300
@@ -1072,11 +1072,8 @@ fail:
 }

 /* Setup system bus parity mask register.
- * Sysbus parity supported on:
- *   e7320/e7520/e7525 + Xeon
- *   i3100 + Xeon/Celeron
- * Sysbus parity not supported on:
- *   i3100 + Pentium M/Celeron M/Core Duo/Core2 Duo
+ * Sysbus parity supported _only on_:
+ * e7320/e7520/e7525 + Xeon
  */
 static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt)
 {
@@ -1084,13 +1081,11 @@ static void e752x_init_sysbus_parity_mas
 	struct pci_dev *dev = pvt->dev_d0f1;
 	int enable = 1;

-	/* Allow module parameter override, else see if CPU supports parity */
+	/* Allow module paramter override, else see if CPU supports parity */
 	if (sysbus_parity != -1) {
 		enable = sysbus_parity;
 	} else if (cpu_id[0] &&
-		   ((strstr(cpu_id, "Pentium") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Celeron") && strstr(cpu_id, " M ")) ||
-		    (strstr(cpu_id, "Core") && strstr(cpu_id, "Duo")))) {
+		   !strstr(cpu_id, "Xeon")) {
 		e752x_printk(KERN_INFO, "System Bus Parity not "
 			     "supported by CPU, disabling\n");
 		enable = 0;