Re: [PATCH v10 13/16] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR

["Sean V Kelley" <sean.v.kelley@intel.com>]

On 5 Nov 2020, at 16:14, Sean V Kelley wrote:

> From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>
> When attempting error recovery for an RCiEP associated with an RCEC 
> device,
> there needs to be a way to update the Root Error Status, the 
> Uncorrectable
> Error Status and the Uncorrectable Error Severity of the parent RCEC.  
> In
> some non-native cases in which there is no OS-visible device 
> associated
> with the RCiEP, there is nothing to act upon as the firmware is acting
> before the OS.
>
> Add handling for the linked RCEC in AER/ERR while taking into account
> non-native cases.
>
> Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
> Link: 
> https://lore.kernel.org/r/20201002184735.1229220-12-seanvk.dev@oregontracks.org
> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---
>  drivers/pci/pcie/aer.c | 35 +++++++++++++++++++++++++++--------
>  drivers/pci/pcie/err.c | 20 ++++++++++----------
>  2 files changed, 37 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
> index 4ab379fa1506..3498af81d240 100644
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1357,29 +1357,48 @@ static int aer_probe(struct pcie_device *dev)
>   */
>  static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>  {
> +	int type = pci_pcie_type(dev);
>  	int aer = dev->aer_cap;
> +	struct pci_dev *root;
>  	int rc = 0;
>  	u32 reg32;
>
> +	if (type == PCI_EXP_TYPE_RC_END)
> +		/*
> +		 * The reset should only clear the Root Error Status
> +		 * of the RCEC. Only perform this for the
> +		 * native case, i.e., an RCEC is present.
> +		 */
> +		root = dev->rcec;
> +	else
> +		root = dev;
> +
>  	if (pcie_aer_is_native(dev)) {
>  		/* Disable Root's interrupt in response to error messages */
> -		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> +		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>  		reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
> -		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
> +		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
>  	}
>
> -	rc = pci_bus_error_reset(dev);
> -	pci_info(dev, "Root Port link has been reset (%d)\n", rc);
> +	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
> +		if (pcie_has_flr(root)) {
> +			rc = pcie_flr(root);
> +			pci_info(dev, "has been reset (%d)\n", rc);
> +		}
> +	} else {
> +		rc = pci_bus_error_reset(root);
> +		pci_info(dev, "Root Port link has been reset (%d)\n", rc);
> +	}

So this needs to change as I didn’t use the aer = dev->aer_cap from 
before
because I’m checking explicitly for pcie_aer_is_native().  However, we 
still
have the scenario of non-native and root = dev->rcec = NULL. Secondly, 
for the flr, that
should be happening on the dev and that should trump use of the root var 
anyway.

So I would change it to: (replacing root with dev)

  +	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
  +		if (pcie_has_flr(dev)) {
  +			rc = pcie_flr(dev);
  +			pci_info(dev, "has been reset (%d)\n", rc);
  +		}
  +	} else {
  +		rc = pci_bus_error_reset(dev);
  +		pci_info(dev, "Root Port link has been reset (%d)\n", rc);
  +	}

Thanks,

Sean


>
>  	if (pcie_aer_is_native(dev)) {
>  		/* Clear Root Error Status */
> -		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, &reg32);
> -		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, reg32);
> +		pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, &reg32);
> +		pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
>
>  		/* Enable Root Port's interrupt in response to error messages */
> -		pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, &reg32);
> +		pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, &reg32);
>  		reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
> -		pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
> +		pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
>  	}
>
>  	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 7883c9791562..cbc5abfe767b 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -148,10 +148,10 @@ static int report_resume(struct pci_dev *dev, 
> void *data)
>
>  /**
>   * pci_walk_bridge - walk bridges potentially AER affected
> - * @bridge:	bridge which may be a Port, an RCEC with associated 
> RCiEPs,
> - *		or an RCiEP associated with an RCEC
> - * @cb:		callback to be called for each device found
> - * @userdata:	arbitrary pointer to be passed to callback
> + * @bridge   bridge which may be an RCEC with associated RCiEPs,
> + *           or a Port.
> + * @cb       callback to be called for each device found
> + * @userdata arbitrary pointer to be passed to callback.
>   *
>   * If the device provided is a bridge, walk the subordinate bus, 
> including
>   * any bridged devices on buses under this bus.  Call the provided 
> callback
> @@ -164,8 +164,14 @@ static void pci_walk_bridge(struct pci_dev 
> *bridge,
>  			    int (*cb)(struct pci_dev *, void *),
>  			    void *userdata)
>  {
> +	/*
> +	 * In a non-native case where there is no OS-visible reporting
> +	 * device the bridge will be NULL, i.e., no RCEC, no Downstream 
> Port.
> +	 */
>  	if (bridge->subordinate)
>  		pci_walk_bus(bridge->subordinate, cb, userdata);
> +	else if (bridge->rcec)
> +		cb(bridge->rcec, userdata);
>  	else
>  		cb(bridge, userdata);
>  }
> @@ -194,12 +200,6 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev 
> *dev,
>  	pci_dbg(bridge, "broadcast error_detected message\n");
>  	if (state == pci_channel_io_frozen) {
>  		pci_walk_bridge(bridge, report_frozen_detected, &status);
> -		if (type == PCI_EXP_TYPE_RC_END) {
> -			pci_warn(dev, "subordinate device reset not possible for 
> RCiEP\n");
> -			status = PCI_ERS_RESULT_NONE;
> -			goto failed;
> -		}
> -
>  		status = reset_subordinates(bridge);
>  		if (status != PCI_ERS_RESULT_RECOVERED) {
>  			pci_warn(bridge, "subordinate device reset failed\n");
> --
> 2.29.2