From: "David Hildenbrand (Arm)" <david@kernel.org>
To: Muchun Song <songmuchun@bytedance.com>,
Andrew Morton <akpm@linux-foundation.org>,
Oscar Salvador <osalvador@suse.de>,
Madhavan Srinivasan <maddy@linux.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Jonathan Corbet <corbet@lwn.net>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-doc@vger.kernel.org,
Muchun Song <muchun.song@linux.dev>,
Lorenzo Stoakes <ljs@kernel.org>, Mike Rapoport <rppt@kernel.org>,
Qi Zheng <qi.zheng@linux.dev>,
Nicholas Piggin <npiggin@gmail.com>,
Christophe Leroy <chleroy@kernel.org>,
Randy Dunlap <rdunlap@infradead.org>,
Lance Yang <lance.yang@linux.dev>
Subject: Re: [PATCH v5 02/12] mm/sparse-vmemmap: allocate shared tail page array dynamically
Date: Tue, 29 Sep 2026 09:21:28 +0200 [thread overview]
Message-ID: <36a93f95-2fb4-4310-bef2-88c12dbe7971@kernel.org> (raw)
In-Reply-To: <20260927025441.741633-3-songmuchun@bytedance.com>
On 9/27/26 04:54, Muchun Song wrote:
> Commit 622026e87c40 ("mm/hugetlb: remove fake head pages") added the
> per-zone vmemmap_tails array. Its size depends on MAX_FOLIO_ORDER, which
> had been moved to mmzone.h in preparation for the array.
>
> PUD_ORDER is defined by linux/pgtable.h, which cannot be included from
> mmzone.h without creating an include cycle. It was therefore open-coded
> as PUD_SHIFT - PAGE_SHIFT.
>
> This removed the dependency on PUD_ORDER, but not the underlying
> dependency on architecture page-table definitions. PUD_SHIFT is
> generally provided by architecture page-table headers, which are not
> guaranteed to have been included when mmzone.h is parsed.
>
> The dependency remained hidden because vmemmap_tails was originally
> guarded by CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP. Under that condition,
> MAX_FOLIO_ORDER resolves to either MAX_PAGE_ORDER or the fixed HugeTLB
> limit, rather than the PUD_SHIFT-based definition.
>
> Device DAX, however, does not require CONFIG_HUGETLB_PAGE. When it is
> converted to use section-based vmemmap optimization, MAX_FOLIO_ORDER can
> resolve to PUD_SHIFT - PAGE_SHIFT while it is being used to size
> vmemmap_tails. This would make struct zone depend on architecture
> page-table definitions being available when mmzone.h is parsed.
>
> Replace the embedded array with a pointer and allocate it on first use.
> This moves the order-count evaluation into sparse-vmemmap.c, after the
> architecture page-table definitions are available, and removes the
> dependency from mmzone.h.
>
> Removing the compile-time array also removes the original reason for
> keeping MAX_FOLIO_ORDER and the vmemmap optimization sizing definitions
> in mmzone.h. Follow-up cleanups can place each definition in the header
> owned by its respective subsystem.
>
> Signed-off-by: Muchun Song <songmuchun@bytedance.com>
> ---
> v5:
> - Add this patch to fix the RISC-V build failure under the configuration
> reported by the kernel test robot
> ---
> include/linux/mmzone.h | 7 +------
> mm/sparse-vmemmap.c | 35 +++++++++++++++++++++++++++++++----
> 2 files changed, 32 insertions(+), 10 deletions(-)
>
> diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
> index acd94cecc0d3..68807ff7f946 100644
> --- a/include/linux/mmzone.h
> +++ b/include/linux/mmzone.h
> @@ -113,11 +113,6 @@
> (VMEMMAP_OPTIMIZATION_PAGES * PAGE_SIZE / sizeof(struct page))
> #define VMEMMAP_OPTIMIZATION_MIN_ORDER (ilog2(VMEMMAP_OPTIMIZATION_NR_STRUCT_PAGES) + 1)
>
> -#define __VMEMMAP_OPTIMIZATION_NR_ORDERS \
> - (MAX_FOLIO_ORDER - VMEMMAP_OPTIMIZATION_MIN_ORDER + 1)
> -#define VMEMMAP_OPTIMIZATION_NR_ORDERS \
> - (__VMEMMAP_OPTIMIZATION_NR_ORDERS > 0 ? __VMEMMAP_OPTIMIZATION_NR_ORDERS : 0)
> -
> enum migratetype {
> MIGRATE_UNMOVABLE,
> MIGRATE_MOVABLE,
> @@ -1156,7 +1151,7 @@ struct zone {
> atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS];
> atomic_long_t vm_numa_event[NR_VM_NUMA_EVENT_ITEMS];
> #ifdef CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
> - struct page *vmemmap_tails[VMEMMAP_OPTIMIZATION_NR_ORDERS];
> + struct page **vmemmap_tails;
> #endif
> } ____cacheline_internodealigned_in_smp;
>
[...]
> struct page __ref *vmemmap_shared_tail_page(unsigned int order, struct zone *zone)
> {
> void *addr;
> - struct page *page;
> + struct page *page, **pages;
> const unsigned int idx = order - VMEMMAP_OPTIMIZATION_MIN_ORDER;
>
> if (WARN_ON_ONCE(idx >= VMEMMAP_OPTIMIZATION_NR_ORDERS))
> return NULL;
>
> - page = READ_ONCE(zone->vmemmap_tails[idx]);
> + pages = READ_ONCE(zone->vmemmap_tails) ? : vmemmap_tails_alloc(zone);
This reads much nicer if you handle the READ_ONCE(zone->vmemmap_tails) inside
the function.
pages = vmemmap_tails(zone);
So just place the entire logic of obtaining the array in there.
Apart from that LGTM.
--
Cheers,
David
next prev parent reply other threads:[~2026-09-29 7:21 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-27 2:54 [PATCH v5 00/12] mm: Switch device DAX to section-based vmemmap optimization Muchun Song
2026-09-27 2:54 ` [PATCH v5 01/12] mm/sparse-vmemmap: factor out shared vmemmap tail page allocation Muchun Song
2026-09-29 7:16 ` David Hildenbrand (Arm)
2026-09-29 7:55 ` Muchun Song
2026-09-27 2:54 ` [PATCH v5 02/12] mm/sparse-vmemmap: allocate shared tail page array dynamically Muchun Song
2026-09-29 7:21 ` David Hildenbrand (Arm) [this message]
2026-09-29 8:00 ` Muchun Song
2026-09-27 2:54 ` [PATCH v5 03/12] mm/sparse-vmemmap: introduce CONFIG_VMEMMAP_OPTIMIZATION Muchun Song
2026-09-29 7:11 ` David Hildenbrand (Arm)
2026-09-29 7:53 ` Muchun Song
2026-09-29 8:43 ` David Hildenbrand (Arm)
2026-09-27 2:54 ` [PATCH v5 04/12] mm/sparse-vmemmap: open-code init_compound_tail() Muchun Song
2026-09-27 2:54 ` [PATCH v5 05/12] mm/sparse-vmemmap: prepare DAX vmemmap population for compound page orders Muchun Song
2026-09-29 7:24 ` David Hildenbrand (Arm)
2026-09-29 8:04 ` Muchun Song
2026-09-27 2:54 ` [PATCH v5 06/12] mm/sparse-vmemmap: set compound page order for device DAX Muchun Song
2026-09-29 7:30 ` David Hildenbrand (Arm)
2026-09-29 8:22 ` Muchun Song
2026-09-29 8:43 ` David Hildenbrand (Arm)
2026-09-27 2:54 ` [PATCH v5 07/12] mm/sparse-vmemmap: switch device DAX to shared tail vmemmap pages Muchun Song
2026-09-28 4:41 ` [PATCH] fixup! " Muchun Song
2026-09-29 7:36 ` [PATCH v5 07/12] " David Hildenbrand (Arm)
2026-09-29 8:36 ` Muchun Song
2026-09-27 2:54 ` [PATCH v5 08/12] mm/sparse-vmemmap: move vmemmap optimization helpers to a public header Muchun Song
2026-09-29 7:39 ` David Hildenbrand (Arm)
2026-09-29 8:44 ` Muchun Song
2026-09-29 10:03 ` Muchun Song
2026-09-27 2:54 ` [PATCH v5 09/12] powerpc/mm: switch device DAX to shared tail vmemmap pages Muchun Song
2026-09-29 8:44 ` David Hildenbrand (Arm)
2026-09-27 2:54 ` [PATCH v5 10/12] mm/sparse-vmemmap: drop the extra tail page from device DAX reservation Muchun Song
2026-09-29 7:45 ` David Hildenbrand (Arm)
2026-09-27 2:54 ` [PATCH v5 11/12] mm/sparse-vmemmap: drop unused section_nr_vmemmap_pages() arguments Muchun Song
2026-09-29 7:41 ` David Hildenbrand (Arm)
2026-09-27 2:54 ` [PATCH v5 12/12] Documentation/mm: update DAX vmemmap deduplication docs Muchun Song
2026-09-29 7:43 ` David Hildenbrand (Arm)
2026-09-27 5:51 ` [PATCH v5 00/12] mm: Switch device DAX to section-based vmemmap optimization Andrew Morton
2026-09-27 10:51 ` Muchun Song
2026-09-27 19:54 ` Andrew Morton
2026-09-28 4:25 ` Muchun Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=36a93f95-2fb4-4310-bef2-88c12dbe7971@kernel.org \
--to=david@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=chleroy@kernel.org \
--cc=corbet@lwn.net \
--cc=lance.yang@linux.dev \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=ljs@kernel.org \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=muchun.song@linux.dev \
--cc=npiggin@gmail.com \
--cc=osalvador@suse.de \
--cc=qi.zheng@linux.dev \
--cc=rdunlap@infradead.org \
--cc=rppt@kernel.org \
--cc=songmuchun@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®