mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paolo Bonzini <pbonzini@redhat.com>
To: Kai Huang <kai.huang@intel.com>,
	dave.hansen@intel.com, bp@alien8.de, tglx@linutronix.de,
	peterz@infradead.org, mingo@redhat.com
Cc: kirill.shutemov@linux.intel.com, hpa@zytor.com, x86@kernel.org,
	linux-kernel@vger.kernel.org, seanjc@google.com,
	rick.p.edgecombe@intel.com, isaku.yamahata@intel.com,
	reinette.chatre@intel.com, dan.j.williams@intel.com,
	thomas.lendacky@amd.com, ashish.kalra@amd.com,
	nik.borisov@suse.com, sagis@google.com
Subject: Re: [RFC PATCH v2 6/5] KVM: TDX: Explicitly do WBINVD upon reboot notifier
Date: Fri, 13 Jun 2025 13:36:46 +0200	[thread overview]
Message-ID: <3a7c0856-6e7b-4d3d-b966-6f17f1aca42e@redhat.com> (raw)
In-Reply-To: <20250510112503.23497-1-kai.huang@intel.com>

On 5/10/25 13:25, Kai Huang wrote:
> On TDX platforms, during kexec, the kernel needs to make sure there's no
> dirty cachelines of TDX private memory before booting to the new kernel
> to avoid silent memory corruption to the new kernel.
> 
> During kexec, the kexec-ing CPU firstly invokes native_stop_other_cpus()
> to stop all remote CPUs before booting to the new kernel.  The remote
> CPUs will then execute stop_this_cpu() to stop themselves.
> 
> The kernel has a percpu boolean to indicate whether the cache of a CPU
> may be in incoherent state.  In stop_this_cpu(), the kernel does WBINVD
> if that percpu boolean is true.
> 
> TDX turns on that percpu boolean on a CPU when the kernel does SEAMCALL.
> This makes sure the cahces will be flushed during kexec.
> 
> However, the native_stop_other_cpus() and stop_this_cpu() have a "race"
> which is extremely rare to happen but if did could cause system to hang.

s/if did//

> Specifically, the native_stop_other_cpus() firstly sends normal reboot
> IPI to remote CPUs and wait one second for them to stop.  If that times
> out, native_stop_other_cpus() then sends NMIs to remote CPUs to stop
> them.
> 
> The aforementioned race happens when NMIs are sent.  Doing WBINVD in
> stop_this_cpu() makes each CPU take longer time to stop and increases
> the chance of the race to happen.
> 
> Register reboot notifier in KVM to explcitly flush caches upon reboot
> for TDX.  This brings doing WBINVD at earlier stage and aovids the
> WBINVD in stop_this_cpu(), eliminating the possibility of increasing the
> chance of the aforementioned race.

"This moves the WBINVD to an earlier stage than stop_this_cpus(), 
avoiding a possibly lengthy operation at a time where it could cause 
this race."

Acked-by: Paolo Bonzini <pbonzini@redhat.com>

Waiting for v3. :)

Paolo

> Signed-off-by: Kai Huang <kai.huang@intel.com>
> ---
>   arch/x86/include/asm/tdx.h  |  3 +++
>   arch/x86/kvm/vmx/tdx.c      | 45 +++++++++++++++++++++++++++++++++++++
>   arch/x86/virt/vmx/tdx/tdx.c |  9 ++++++++
>   3 files changed, 57 insertions(+)
> 
> diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h
> index 91dc6e6bdd97..d0156bf0b966 100644
> --- a/arch/x86/include/asm/tdx.h
> +++ b/arch/x86/include/asm/tdx.h
> @@ -221,6 +221,8 @@ u64 tdh_mem_page_remove(struct tdx_td *td, u64 gpa, u64 level, u64 *ext_err1, u6
>   u64 tdh_phymem_cache_wb(bool resume);
>   u64 tdh_phymem_page_wbinvd_tdr(struct tdx_td *td);
>   u64 tdh_phymem_page_wbinvd_hkid(u64 hkid, struct page *page);
> +
> +void tdx_cpu_flush_cache(void);
>   #else
>   static inline void tdx_init(void) { }
>   static inline int tdx_cpu_enable(void) { return -ENODEV; }
> @@ -228,6 +230,7 @@ static inline int tdx_enable(void)  { return -ENODEV; }
>   static inline u32 tdx_get_nr_guest_keyids(void) { return 0; }
>   static inline const char *tdx_dump_mce_info(struct mce *m) { return NULL; }
>   static inline const struct tdx_sys_info *tdx_get_sysinfo(void) { return NULL; }
> +static inline void tdx_cpu_flush_cache(void) { }
>   #endif	/* CONFIG_INTEL_TDX_HOST */
>   
>   #endif /* !__ASSEMBLER__ */
> diff --git a/arch/x86/kvm/vmx/tdx.c b/arch/x86/kvm/vmx/tdx.c
> index b952bc673271..3b92b3999855 100644
> --- a/arch/x86/kvm/vmx/tdx.c
> +++ b/arch/x86/kvm/vmx/tdx.c
> @@ -5,7 +5,9 @@
>   #include <asm/fpu/xcr.h>
>   #include <linux/misc_cgroup.h>
>   #include <linux/mmu_context.h>
> +#include <linux/reboot.h>
>   #include <asm/tdx.h>
> +#include <asm/processor.h>
>   #include "capabilities.h"
>   #include "mmu.h"
>   #include "x86_ops.h"
> @@ -3278,6 +3280,33 @@ static int tdx_offline_cpu(unsigned int cpu)
>   	return -EBUSY;
>   }
>   
> +static void smp_func_cpu_flush_cache(void *unused)
> +{
> +	tdx_cpu_flush_cache();
> +}
> +
> +static int tdx_reboot_notify(struct notifier_block *nb, unsigned long code,
> +			     void *unused)
> +{
> +	/*
> +	 * Flush cache for all CPUs upon the reboot notifier.  This
> +	 * avoids having to do WBINVD in stop_this_cpu() during kexec.
> +	 *
> +	 * Kexec calls native_stop_other_cpus() to stop remote CPUs
> +	 * before booting to new kernel, but that code has a "race"
> +	 * when the normal REBOOT IPI timesout and NMIs are sent to
> +	 * remote CPUs to stop them.  Doing WBINVD in stop_this_cpu()
> +	 * could potentially increase the posibility of the "race".
> +	 */
> +	if (code == SYS_RESTART)
> +		on_each_cpu(smp_func_cpu_flush_cache, NULL, 1);
> +	return NOTIFY_DONE;
> +}
> +
> +static struct notifier_block tdx_reboot_nb = {
> +	.notifier_call = tdx_reboot_notify,
> +};
> +
>   static void __do_tdx_cleanup(void)
>   {
>   	/*
> @@ -3435,6 +3464,11 @@ void tdx_cleanup(void)
>   {
>   	if (enable_tdx) {
>   		misc_cg_set_capacity(MISC_CG_RES_TDX, 0);
> +		/*
> +		 * Ignore the return value.  See the comment in
> +		 * tdx_bringup().
> +		 */
> +		unregister_reboot_notifier(&tdx_reboot_nb);
>   		__tdx_cleanup();
>   		kvm_disable_virtualization();
>   	}
> @@ -3518,6 +3552,17 @@ int __init tdx_bringup(void)
>   		enable_tdx = 0;
>   	}
>   
> +	if (enable_tdx)
> +		/*
> +		 * Ignore the return value.  @tdx_reboot_nb is used to flush
> +		 * cache for all CPUs upon rebooting to avoid having to do
> +		 * WBINVD in kexec while the kexec-ing CPU stops all remote
> +		 * CPUs.  Failure to register isn't fatal, because if KVM
> +		 * doesn't flush cache explicitly upon rebooting the kexec
> +		 * will do it anyway.
> +		 */
> +		register_reboot_notifier(&tdx_reboot_nb);
> +
>   	return r;
>   
>   success_disable_tdx:
> diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
> index af8798bc62ed..7478230cdc33 100644
> --- a/arch/x86/virt/vmx/tdx/tdx.c
> +++ b/arch/x86/virt/vmx/tdx/tdx.c
> @@ -1890,3 +1890,12 @@ u64 tdh_phymem_page_wbinvd_hkid(u64 hkid, struct page *page)
>   	return seamcall(TDH_PHYMEM_PAGE_WBINVD, &args);
>   }
>   EXPORT_SYMBOL_GPL(tdh_phymem_page_wbinvd_hkid);
> +
> +void tdx_cpu_flush_cache(void)
> +{
> +	lockdep_assert_preemption_disabled();
> +
> +	wbinvd();
> +	this_cpu_write(cache_state_incoherent, false);
> +}
> +EXPORT_SYMBOL_GPL(tdx_cpu_flush_cache);


  reply	other threads:[~2025-06-13 11:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-10 11:20 [PATCH v2 0/5] TDX host: kexec/kdump support Kai Huang
2025-05-10 11:20 ` [PATCH v2 1/5] x86/sme: Use percpu boolean to control wbinvd during kexec Kai Huang
2025-05-10 11:20 ` [PATCH v2 2/5] x86/virt/tdx: Mark memory cache state incoherent when making SEAMCALL Kai Huang
2025-05-14 10:10   ` [PATCH v2.1 " Kai Huang
2025-05-14 15:52     ` Dave Hansen
2025-05-14 22:13       ` Huang, Kai
2025-05-10 11:20 ` [PATCH v2 3/5] x86/kexec: Disable kexec/kdump on platforms with TDX partial write erratum Kai Huang
2025-05-10 11:20 ` [PATCH v2 4/5] x86/virt/tdx: Remove the !KEXEC_CORE dependency Kai Huang
2025-05-10 11:20 ` [PATCH v2 5/5] x86/virt/tdx: Update the kexec section in the TDX documentation Kai Huang
2025-05-10 11:25 ` [RFC PATCH v2 6/5] KVM: TDX: Explicitly do WBINVD upon reboot notifier Kai Huang
2025-06-13 11:36   ` Paolo Bonzini [this message]
2025-06-16 10:39     ` Huang, Kai
2025-05-14 12:37 ` [PATCH v2 0/5] TDX host: kexec/kdump support Tom Lendacky
2025-05-14 22:09   ` Huang, Kai
2025-05-29 11:06   ` Huang, Kai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3a7c0856-6e7b-4d3d-b966-6f17f1aca42e@redhat.com \
    --to=pbonzini@redhat.com \
    --cc=ashish.kalra@amd.com \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=hpa@zytor.com \
    --cc=isaku.yamahata@intel.com \
    --cc=kai.huang@intel.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@redhat.com \
    --cc=nik.borisov@suse.com \
    --cc=peterz@infradead.org \
    --cc=reinette.chatre@intel.com \
    --cc=rick.p.edgecombe@intel.com \
    --cc=sagis@google.com \
    --cc=seanjc@google.com \
    --cc=tglx@linutronix.de \
    --cc=thomas.lendacky@amd.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®