* [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices
@ 2026-01-28 5:32 Gaurav Kohli
2026-01-28 9:25 ` Konrad Dybcio
2026-02-03 5:51 ` Manivannan Sadhasivam
0 siblings, 2 replies; 5+ messages in thread
From: Gaurav Kohli @ 2026-01-28 5:32 UTC (permalink / raw)
To: andersson, konradybcio, robh, krzk+dt, conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel, Gaurav Kohli
Add cooling-cells property to the CPU nodes to support cpufreq
cooling devices.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/hamoa.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
index db65c392e618..799e405a9f87 100644
--- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
@@ -75,6 +75,7 @@ cpu0: cpu@0 {
next-level-cache = <&l2_0>;
power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
l2_0: l2-cache {
compatible = "cache";
@@ -91,6 +92,7 @@ cpu1: cpu@100 {
next-level-cache = <&l2_0>;
power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu2: cpu@200 {
@@ -101,6 +103,7 @@ cpu2: cpu@200 {
next-level-cache = <&l2_0>;
power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu3: cpu@300 {
@@ -111,6 +114,7 @@ cpu3: cpu@300 {
next-level-cache = <&l2_0>;
power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu4: cpu@10000 {
@@ -121,6 +125,7 @@ cpu4: cpu@10000 {
next-level-cache = <&l2_1>;
power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
l2_1: l2-cache {
compatible = "cache";
@@ -137,6 +142,7 @@ cpu5: cpu@10100 {
next-level-cache = <&l2_1>;
power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu6: cpu@10200 {
@@ -147,6 +153,7 @@ cpu6: cpu@10200 {
next-level-cache = <&l2_1>;
power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu7: cpu@10300 {
@@ -157,6 +164,7 @@ cpu7: cpu@10300 {
next-level-cache = <&l2_1>;
power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu8: cpu@20000 {
@@ -167,6 +175,7 @@ cpu8: cpu@20000 {
next-level-cache = <&l2_2>;
power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
l2_2: l2-cache {
compatible = "cache";
@@ -183,6 +192,7 @@ cpu9: cpu@20100 {
next-level-cache = <&l2_2>;
power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu10: cpu@20200 {
@@ -193,6 +203,7 @@ cpu10: cpu@20200 {
next-level-cache = <&l2_2>;
power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu11: cpu@20300 {
@@ -203,6 +214,7 @@ cpu11: cpu@20300 {
next-level-cache = <&l2_2>;
power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
power-domain-names = "psci", "perf";
+ #cooling-cells = <2>;
};
cpu-map {
--
2.34.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices
2026-01-28 5:32 [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices Gaurav Kohli
@ 2026-01-28 9:25 ` Konrad Dybcio
2026-02-03 5:51 ` Manivannan Sadhasivam
1 sibling, 0 replies; 5+ messages in thread
From: Konrad Dybcio @ 2026-01-28 9:25 UTC (permalink / raw)
To: Gaurav Kohli, andersson, konradybcio, robh, krzk+dt, conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel
On 1/28/26 6:32 AM, Gaurav Kohli wrote:
> Add cooling-cells property to the CPU nodes to support cpufreq
> cooling devices.
>
> Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
> ---
The subject has one level of square braces too many, which makes
tooling grumpy
> arch/arm64/boot/dts/qcom/hamoa.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
> index db65c392e618..799e405a9f87 100644
> --- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
> +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
> @@ -75,6 +75,7 @@ cpu0: cpu@0 {
> next-level-cache = <&l2_0>;
> power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
If we're making this change, I think it'd make sense to do so
for all SoCs with some form of cpufreq, since being able to
throttle the CPUs is no less than desired..
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Konrad
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices
2026-01-28 5:32 [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices Gaurav Kohli
2026-01-28 9:25 ` Konrad Dybcio
@ 2026-02-03 5:51 ` Manivannan Sadhasivam
2026-02-10 4:43 ` Gaurav Kohli
1 sibling, 1 reply; 5+ messages in thread
From: Manivannan Sadhasivam @ 2026-02-03 5:51 UTC (permalink / raw)
To: Gaurav Kohli
Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm,
devicetree, linux-kernel
On Wed, Jan 28, 2026 at 11:02:08AM +0530, Gaurav Kohli wrote:
> Add cooling-cells property to the CPU nodes to support cpufreq
> cooling devices.
>
> Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
FYI: I submitted the similar version back in October:
https://lore.kernel.org/linux-arm-msm/20251015065703.9422-1-mani@kernel.org/
- Mani
> ---
> arch/arm64/boot/dts/qcom/hamoa.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
> index db65c392e618..799e405a9f87 100644
> --- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
> +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
> @@ -75,6 +75,7 @@ cpu0: cpu@0 {
> next-level-cache = <&l2_0>;
> power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
>
> l2_0: l2-cache {
> compatible = "cache";
> @@ -91,6 +92,7 @@ cpu1: cpu@100 {
> next-level-cache = <&l2_0>;
> power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu2: cpu@200 {
> @@ -101,6 +103,7 @@ cpu2: cpu@200 {
> next-level-cache = <&l2_0>;
> power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu3: cpu@300 {
> @@ -111,6 +114,7 @@ cpu3: cpu@300 {
> next-level-cache = <&l2_0>;
> power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu4: cpu@10000 {
> @@ -121,6 +125,7 @@ cpu4: cpu@10000 {
> next-level-cache = <&l2_1>;
> power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
>
> l2_1: l2-cache {
> compatible = "cache";
> @@ -137,6 +142,7 @@ cpu5: cpu@10100 {
> next-level-cache = <&l2_1>;
> power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu6: cpu@10200 {
> @@ -147,6 +153,7 @@ cpu6: cpu@10200 {
> next-level-cache = <&l2_1>;
> power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu7: cpu@10300 {
> @@ -157,6 +164,7 @@ cpu7: cpu@10300 {
> next-level-cache = <&l2_1>;
> power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu8: cpu@20000 {
> @@ -167,6 +175,7 @@ cpu8: cpu@20000 {
> next-level-cache = <&l2_2>;
> power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
>
> l2_2: l2-cache {
> compatible = "cache";
> @@ -183,6 +192,7 @@ cpu9: cpu@20100 {
> next-level-cache = <&l2_2>;
> power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu10: cpu@20200 {
> @@ -193,6 +203,7 @@ cpu10: cpu@20200 {
> next-level-cache = <&l2_2>;
> power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu11: cpu@20300 {
> @@ -203,6 +214,7 @@ cpu11: cpu@20300 {
> next-level-cache = <&l2_2>;
> power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
> power-domain-names = "psci", "perf";
> + #cooling-cells = <2>;
> };
>
> cpu-map {
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices
2026-02-03 5:51 ` Manivannan Sadhasivam
@ 2026-02-10 4:43 ` Gaurav Kohli
2026-02-10 8:00 ` Manivannan Sadhasivam
0 siblings, 1 reply; 5+ messages in thread
From: Gaurav Kohli @ 2026-02-10 4:43 UTC (permalink / raw)
To: Manivannan Sadhasivam
Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm,
devicetree, linux-kernel
On 2/3/2026 11:21 AM, Manivannan Sadhasivam wrote:
> On Wed, Jan 28, 2026 at 11:02:08AM +0530, Gaurav Kohli wrote:
>> Add cooling-cells property to the CPU nodes to support cpufreq
>> cooling devices.
>>
>> Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
>
> FYI: I submitted the similar version back in October:
> https://lore.kernel.org/linux-arm-msm/20251015065703.9422-1-mani@kernel.org/
>
Hi Mani,
thanks for sharing this link. Could you please respin your patch. So
that it can get merged? we need this cpufreq support enabled.
> - Mani
>
>> ---
>> arch/arm64/boot/dts/qcom/hamoa.dtsi | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
>> index db65c392e618..799e405a9f87 100644
>> --- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
>> @@ -75,6 +75,7 @@ cpu0: cpu@0 {
>> next-level-cache = <&l2_0>;
>> power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>>
>> l2_0: l2-cache {
>> compatible = "cache";
>> @@ -91,6 +92,7 @@ cpu1: cpu@100 {
>> next-level-cache = <&l2_0>;
>> power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu2: cpu@200 {
>> @@ -101,6 +103,7 @@ cpu2: cpu@200 {
>> next-level-cache = <&l2_0>;
>> power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu3: cpu@300 {
>> @@ -111,6 +114,7 @@ cpu3: cpu@300 {
>> next-level-cache = <&l2_0>;
>> power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu4: cpu@10000 {
>> @@ -121,6 +125,7 @@ cpu4: cpu@10000 {
>> next-level-cache = <&l2_1>;
>> power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>>
>> l2_1: l2-cache {
>> compatible = "cache";
>> @@ -137,6 +142,7 @@ cpu5: cpu@10100 {
>> next-level-cache = <&l2_1>;
>> power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu6: cpu@10200 {
>> @@ -147,6 +153,7 @@ cpu6: cpu@10200 {
>> next-level-cache = <&l2_1>;
>> power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu7: cpu@10300 {
>> @@ -157,6 +164,7 @@ cpu7: cpu@10300 {
>> next-level-cache = <&l2_1>;
>> power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu8: cpu@20000 {
>> @@ -167,6 +175,7 @@ cpu8: cpu@20000 {
>> next-level-cache = <&l2_2>;
>> power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>>
>> l2_2: l2-cache {
>> compatible = "cache";
>> @@ -183,6 +192,7 @@ cpu9: cpu@20100 {
>> next-level-cache = <&l2_2>;
>> power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu10: cpu@20200 {
>> @@ -193,6 +203,7 @@ cpu10: cpu@20200 {
>> next-level-cache = <&l2_2>;
>> power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu11: cpu@20300 {
>> @@ -203,6 +214,7 @@ cpu11: cpu@20300 {
>> next-level-cache = <&l2_2>;
>> power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
>> power-domain-names = "psci", "perf";
>> + #cooling-cells = <2>;
>> };
>>
>> cpu-map {
>> --
>> 2.34.1
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices
2026-02-10 4:43 ` Gaurav Kohli
@ 2026-02-10 8:00 ` Manivannan Sadhasivam
0 siblings, 0 replies; 5+ messages in thread
From: Manivannan Sadhasivam @ 2026-02-10 8:00 UTC (permalink / raw)
To: Gaurav Kohli
Cc: andersson, konradybcio, robh, krzk+dt, conor+dt, linux-arm-msm,
devicetree, linux-kernel
On Tue, Feb 10, 2026 at 10:13:44AM +0530, Gaurav Kohli wrote:
>
>
> On 2/3/2026 11:21 AM, Manivannan Sadhasivam wrote:
> > On Wed, Jan 28, 2026 at 11:02:08AM +0530, Gaurav Kohli wrote:
> > > Add cooling-cells property to the CPU nodes to support cpufreq
> > > cooling devices.
> > >
> > > Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
> >
> > FYI: I submitted the similar version back in October:
> > https://lore.kernel.org/linux-arm-msm/20251015065703.9422-1-mani@kernel.org/
> >
>
> Hi Mani,
>
> thanks for sharing this link. Could you please respin your patch. So that it
> can get merged? we need this cpufreq support enabled.
>
Done: https://lore.kernel.org/linux-arm-msm/20260210070321.17033-1-manivannan.sadhasivam@oss.qualcomm.com
- Mani
> > - Mani
> >
> > > ---
> > > arch/arm64/boot/dts/qcom/hamoa.dtsi | 12 ++++++++++++
> > > 1 file changed, 12 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi
> > > index db65c392e618..799e405a9f87 100644
> > > --- a/arch/arm64/boot/dts/qcom/hamoa.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi
> > > @@ -75,6 +75,7 @@ cpu0: cpu@0 {
> > > next-level-cache = <&l2_0>;
> > > power-domains = <&cpu_pd0>, <&scmi_dvfs 0>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > l2_0: l2-cache {
> > > compatible = "cache";
> > > @@ -91,6 +92,7 @@ cpu1: cpu@100 {
> > > next-level-cache = <&l2_0>;
> > > power-domains = <&cpu_pd1>, <&scmi_dvfs 0>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu2: cpu@200 {
> > > @@ -101,6 +103,7 @@ cpu2: cpu@200 {
> > > next-level-cache = <&l2_0>;
> > > power-domains = <&cpu_pd2>, <&scmi_dvfs 0>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu3: cpu@300 {
> > > @@ -111,6 +114,7 @@ cpu3: cpu@300 {
> > > next-level-cache = <&l2_0>;
> > > power-domains = <&cpu_pd3>, <&scmi_dvfs 0>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu4: cpu@10000 {
> > > @@ -121,6 +125,7 @@ cpu4: cpu@10000 {
> > > next-level-cache = <&l2_1>;
> > > power-domains = <&cpu_pd4>, <&scmi_dvfs 1>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > l2_1: l2-cache {
> > > compatible = "cache";
> > > @@ -137,6 +142,7 @@ cpu5: cpu@10100 {
> > > next-level-cache = <&l2_1>;
> > > power-domains = <&cpu_pd5>, <&scmi_dvfs 1>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu6: cpu@10200 {
> > > @@ -147,6 +153,7 @@ cpu6: cpu@10200 {
> > > next-level-cache = <&l2_1>;
> > > power-domains = <&cpu_pd6>, <&scmi_dvfs 1>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu7: cpu@10300 {
> > > @@ -157,6 +164,7 @@ cpu7: cpu@10300 {
> > > next-level-cache = <&l2_1>;
> > > power-domains = <&cpu_pd7>, <&scmi_dvfs 1>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu8: cpu@20000 {
> > > @@ -167,6 +175,7 @@ cpu8: cpu@20000 {
> > > next-level-cache = <&l2_2>;
> > > power-domains = <&cpu_pd8>, <&scmi_dvfs 2>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > l2_2: l2-cache {
> > > compatible = "cache";
> > > @@ -183,6 +192,7 @@ cpu9: cpu@20100 {
> > > next-level-cache = <&l2_2>;
> > > power-domains = <&cpu_pd9>, <&scmi_dvfs 2>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu10: cpu@20200 {
> > > @@ -193,6 +203,7 @@ cpu10: cpu@20200 {
> > > next-level-cache = <&l2_2>;
> > > power-domains = <&cpu_pd10>, <&scmi_dvfs 2>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu11: cpu@20300 {
> > > @@ -203,6 +214,7 @@ cpu11: cpu@20300 {
> > > next-level-cache = <&l2_2>;
> > > power-domains = <&cpu_pd11>, <&scmi_dvfs 2>;
> > > power-domain-names = "psci", "perf";
> > > + #cooling-cells = <2>;
> > > };
> > > cpu-map {
> > > --
> > > 2.34.1
> > >
> >
>
--
மணிவண்ணன் சதாசிவம்
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-02-10 8:00 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2026-01-28 5:32 [[PATCH]] arm64: dts: qcom: hamoa: Enable cpufreq cooling devices Gaurav Kohli
2026-01-28 9:25 ` Konrad Dybcio
2026-02-03 5:51 ` Manivannan Sadhasivam
2026-02-10 4:43 ` Gaurav Kohli
2026-02-10 8:00 ` Manivannan Sadhasivam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®