From: Stas Sergeev <stsp@aknet.ru>
To: Hugh Dickins <hugh@veritas.com>
Cc: Andrew Morton <akpm@osdl.org>,
Ulrich Drepper <drepper@redhat.com>,
Linux kernel <linux-kernel@vger.kernel.org>
Subject: Re: [patch] remove MNT_NOEXEC check for PROT_EXEC mmaps
Date: Sat, 23 Sep 2006 19:42:03 +0400 [thread overview]
Message-ID: <451555CB.5010006@aknet.ru> (raw)
In-Reply-To: <Pine.LNX.4.64.0609231555390.27012@blonde.wat.veritas.com>
Hi.
Hugh Dickins wrote:
> automatically. But they were put in for good reason, have been
> in for nearly three years, I doubt they should come out now.
I know they won't. I only thought I have to try, after seeing
the debian problem and googling out a few negative posts about
these checks.
> It's hardly any surprise, is it, that if a distro chooses now
> to mount something "noexec", a problem is then found with a few
> things which want otherwise?
They do not "want otherwise". They do the right thing - use
shm_open() and then mmap(), but mmap() suddenly fails. The apps
are not guilty. Neither I think the debian guys are.
> And it seems unlikely that the answer
> is then to modify the kernel, to weaken the very protection they're
> wanting to add?
I don't think they want to prevent PROT_EXEC mmaps. Almost
certainly not. Maybe they thought they would only block mere
execve() calls and the like, I don't know. My point is that
this change (use of "noexec") should not break the properly
written apps, but right now it does. Is it stated anywhere
in the shm_open() manpage or elsewhere that you must not use
"noexec" on tmpfs or you'll get troubles with mmap?
> The original 2.6.0 patch (later backported into 2.4.25) was
> <drepper@redhat.com>
> [PATCH] Fix 'noexec' behaviour
> We should not allow mmap() with PROT_EXEC on mounts marked "noexec",
> since otherwise there is no way for user-supplied executable loaders
> (like ld.so and emulator environments) to properly honour the
> "noexec"ness of the target.
Thanks for the pointer, but that looks like the user-space
issue to me. Why ld.so can't figure out the "noexecness" and
do the right thing itself? Or does it figure out the "noexecness"
exactly by trying the PROT_EXEC mmap and see if it fails?
next prev parent reply other threads:[~2006-09-23 15:40 UTC|newest]
Thread overview: 97+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-23 10:30 Stas Sergeev
2006-09-23 15:16 ` Hugh Dickins
2006-09-23 15:36 ` Ulrich Drepper
2006-09-23 15:47 ` Stas Sergeev
2006-09-25 1:12 ` Valdis.Kletnieks
2006-09-25 4:35 ` Stas Sergeev
2006-09-23 15:42 ` Stas Sergeev [this message]
2006-09-23 16:04 ` Hugh Dickins
2006-09-23 16:38 ` Stas Sergeev
2006-09-23 18:58 ` Alan Cox
2006-09-24 6:55 ` Stas Sergeev
2006-09-24 9:17 ` Hugh Dickins
2006-09-24 10:00 ` Stas Sergeev
2006-09-24 13:53 ` Alan Cox
2006-09-24 14:54 ` Stas Sergeev
2006-09-24 15:48 ` Ulrich Drepper
2006-09-24 16:31 ` Stas Sergeev
2006-09-24 16:49 ` Ulrich Drepper
2006-09-24 17:04 ` Stas Sergeev
2006-09-24 18:09 ` Stas Sergeev
2006-09-24 19:14 ` David Wagner
2006-09-24 19:37 ` Kyle Moffett
2006-09-24 22:49 ` David Wagner
2006-09-25 10:53 ` Pavel Machek
2006-09-25 21:36 ` David Wagner
2006-09-27 11:51 ` Pavel Machek
2006-09-24 20:06 ` Denis Vlasenko
2006-09-24 20:22 ` Stas Sergeev
2006-09-24 23:04 ` David Wagner
2006-09-26 19:46 ` Stas Sergeev
2006-09-27 22:33 ` Arjan van de Ven
2006-09-27 23:10 ` David Wagner
2006-09-27 23:38 ` Jesper Juhl
2006-09-29 1:14 ` David Wagner
2006-09-28 4:52 ` Stas Sergeev
2006-09-30 9:42 ` Stas Sergeev
2006-10-03 15:01 ` Arjan van de Ven
2006-10-03 17:15 ` Stas Sergeev
2006-10-03 17:23 ` Ulrich Drepper
2006-10-03 18:06 ` Stas Sergeev
2006-10-03 19:19 ` Ulrich Drepper
2006-10-03 19:40 ` Stas Sergeev
2006-10-03 19:54 ` Arjan van de Ven
2006-10-04 19:36 ` Stas Sergeev
2006-10-04 21:31 ` David Wagner
2006-10-04 3:11 ` David Wagner
2006-10-04 3:51 ` Ulrich Drepper
2006-10-04 4:21 ` David Wagner
2006-10-04 6:03 ` Kyle Moffett
2006-10-04 17:30 ` Ulrich Drepper
2006-10-03 18:23 ` Arjan van de Ven
2006-10-03 18:40 ` Stas Sergeev
2006-10-03 18:42 ` Arjan van de Ven
2006-10-03 19:07 ` Stas Sergeev
2006-10-03 21:00 ` Jakub Jelinek
2006-10-04 19:06 ` Stas Sergeev
2006-10-06 18:09 ` [patch] honour MNT_NOEXEC for access() Stas Sergeev
2006-10-06 21:34 ` Alan Cox
2006-10-06 21:17 ` Ulrich Drepper
2006-10-07 11:19 ` Stas Sergeev
2006-10-07 15:00 ` David Wagner
2006-10-07 16:31 ` Ulrich Drepper
2006-10-07 19:14 ` Stas Sergeev
2006-10-07 19:36 ` David Wagner
2006-10-08 8:32 ` Arjan van de Ven
2006-10-08 9:11 ` Stas Sergeev
2006-10-08 10:55 ` Arjan van de Ven
2006-10-08 13:46 ` Stas Sergeev
2006-10-09 2:09 ` Horst H. von Brand
2006-10-09 4:40 ` Stas Sergeev
2006-10-07 13:18 ` Stas Sergeev
2006-10-08 0:30 ` Jeremy Fitzhardinge
2006-10-08 9:10 ` Stas Sergeev
2006-10-08 9:56 ` Jeremy Fitzhardinge
2006-10-08 10:36 ` Stas Sergeev
2006-10-08 10:39 ` Jesper Juhl
2006-10-08 13:22 ` Stas Sergeev
2006-10-06 22:26 ` Jesper Juhl
2006-10-04 19:30 ` [patch] remove MNT_NOEXEC check for PROT_EXEC mmaps Stas Sergeev
2006-10-04 3:20 ` David Wagner
2006-10-04 3:17 ` David Wagner
2006-10-04 13:41 ` Jeff Dike
2006-10-04 18:02 ` Jesper Juhl
2006-10-04 19:48 ` Stas Sergeev
2006-09-27 19:16 ` [patch] remove MNT_NOEXEC check for PROT_EXEC MAP_PRIVATE mmaps Stas Sergeev
2006-09-27 20:05 ` Hugh Dickins
2006-09-28 4:33 ` Stas Sergeev
2006-09-28 16:42 ` Hugh Dickins
2006-09-29 1:41 ` David Wagner
2006-09-29 20:50 ` Arjan van de Ven
2006-09-29 16:54 ` Stas Sergeev
2006-09-24 19:59 ` [patch] remove MNT_NOEXEC check for PROT_EXEC mmaps Alan Cox
2006-09-24 20:07 ` Stas Sergeev
2006-09-24 0:53 ` Arjan van de Ven
2006-09-25 17:17 ` Stas Sergeev
2006-09-25 17:43 ` Stas Sergeev
2006-09-25 20:12 ` David Wagner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=451555CB.5010006@aknet.ru \
--to=stsp@aknet.ru \
--cc=akpm@osdl.org \
--cc=drepper@redhat.com \
--cc=hugh@veritas.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome