* [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE
@ 2012-03-02 20:58 Alan Ott
2012-03-04 18:37 ` Olof Johansson
0 siblings, 1 reply; 3+ messages in thread
From: Alan Ott @ 2012-03-02 20:58 UTC (permalink / raw)
To: Colin Cross, Olof Johansson, Stephen Warren, Russell King,
linux-tegra, linux-arm-kernel, linux-kernel
Cc: Arnd Bergmann, Alan Ott
From: Arnd Bergmann <arnd@arndb.de>
The tegra cpufreq implementation relies on the cpu_freq_table
code, so make sure that this is always there when needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alan Ott <alan@signal11.us>
---
arch/arm/mach-tegra/Kconfig | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 373652d..60f3e4b 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -10,6 +10,7 @@ config ARCH_TEGRA_2x_SOC
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB_SUPPORT
select USB_ULPI_VIEWPORT if USB_SUPPORT
+ select CPU_FREQ_TABLE if CPU_FREQ
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
@@ -23,6 +24,7 @@ config ARCH_TEGRA_3x_SOC
select USB_ULPI if USB_SUPPORT
select USB_ULPI_VIEWPORT if USB_SUPPORT
select USE_OF
+ select CPU_FREQ_TABLE if CPU_FREQ
help
Support for NVIDIA Tegra T30 processor family, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
--
1.7.0.4
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE
2012-03-02 20:58 [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE Alan Ott
@ 2012-03-04 18:37 ` Olof Johansson
2012-03-04 19:47 ` Alan Ott
0 siblings, 1 reply; 3+ messages in thread
From: Olof Johansson @ 2012-03-04 18:37 UTC (permalink / raw)
To: Alan Ott
Cc: Colin Cross, Stephen Warren, Russell King, linux-tegra,
linux-arm-kernel, linux-kernel, Arnd Bergmann
On Fri, Mar 02, 2012 at 03:58:28PM -0500, Alan Ott wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> The tegra cpufreq implementation relies on the cpu_freq_table
> code, so make sure that this is always there when needed.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Alan Ott <alan@signal11.us>
This didn't apply cleanly to the tegra tree (what was it based on?), but
I fixed it up manually and applied to for-3.4/cleanups-and-fixes.
Thanks,
-Olof
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE
2012-03-04 18:37 ` Olof Johansson
@ 2012-03-04 19:47 ` Alan Ott
0 siblings, 0 replies; 3+ messages in thread
From: Alan Ott @ 2012-03-04 19:47 UTC (permalink / raw)
To: Olof Johansson
Cc: Colin Cross, Stephen Warren, Russell King, linux-tegra,
linux-arm-kernel, linux-kernel, Arnd Bergmann
On 3/4/12 1:37 PM, Olof Johansson wrote:
> On Fri, Mar 02, 2012 at 03:58:28PM -0500, Alan Ott wrote:
>> From: Arnd Bergmann<arnd@arndb.de>
>>
>> The tegra cpufreq implementation relies on the cpu_freq_table
>> code, so make sure that this is always there when needed.
>>
>> Signed-off-by: Arnd Bergmann<arnd@arndb.de>
>> Signed-off-by: Alan Ott<alan@signal11.us>
>
> This didn't apply cleanly to the tegra tree (what was it based on?), but
> I fixed it up manually and applied to for-3.4/cleanups-and-fixes.
>
These were based on mainline.
Alan.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-03-04 19:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-02 20:58 [PATCH v2 2/6] ARM: tegra: select CPU_FREQ_TABLE Alan Ott
2012-03-04 18:37 ` Olof Johansson
2012-03-04 19:47 ` Alan Ott
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®