* [PATCH] drm/bridge: anx7625: Don't log an error when DSI host can't be found
@ 2024-02-26 21:20 Nícolas F. R. A. Prado
2024-02-28 9:51 ` AngeloGioacchino Del Regno
2024-02-28 12:54 ` Neil Armstrong
0 siblings, 2 replies; 3+ messages in thread
From: Nícolas F. R. A. Prado @ 2024-02-26 21:20 UTC (permalink / raw)
To: Robert Foss
Cc: Andrzej Hajda, Neil Armstrong, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, owen,
AngeloGioacchino Del Regno, kernel, dri-devel, linux-kernel,
Nícolas F. R. A. Prado
Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.
Fixes: 269332997a16 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---
drivers/gpu/drm/bridge/analogix/anx7625.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
index 29d91493b101..4ee5614a2623 100644
--- a/drivers/gpu/drm/bridge/analogix/anx7625.c
+++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
@@ -2076,10 +2076,8 @@ static int anx7625_setup_dsi_device(struct anx7625_data *ctx)
};
host = of_find_mipi_dsi_host_by_node(ctx->pdata.mipi_host_node);
- if (!host) {
- DRM_DEV_ERROR(dev, "fail to find dsi host.\n");
- return -EPROBE_DEFER;
- }
+ if (!host)
+ return dev_err_probe(dev, -EPROBE_DEFER, "fail to find dsi host.\n");
dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
if (IS_ERR(dsi)) {
---
base-commit: 2ae0a045e6814c8c1d676d6153c605a65746aa29
change-id: 20240226-anx7625-defer-log-no-dsi-host-c3f9ccbcb287
Best regards,
--
Nícolas F. R. A. Prado <nfraprado@collabora.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] drm/bridge: anx7625: Don't log an error when DSI host can't be found
2024-02-26 21:20 [PATCH] drm/bridge: anx7625: Don't log an error when DSI host can't be found Nícolas F. R. A. Prado
@ 2024-02-28 9:51 ` AngeloGioacchino Del Regno
2024-02-28 12:54 ` Neil Armstrong
1 sibling, 0 replies; 3+ messages in thread
From: AngeloGioacchino Del Regno @ 2024-02-28 9:51 UTC (permalink / raw)
To: Nícolas F. R. A. Prado, Robert Foss
Cc: Andrzej Hajda, Neil Armstrong, Laurent Pinchart, Jonas Karlman,
Jernej Skrabec, Maarten Lankhorst, Maxime Ripard,
Thomas Zimmermann, David Airlie, Daniel Vetter, owen, kernel,
dri-devel, linux-kernel
Il 26/02/24 22:20, Nícolas F. R. A. Prado ha scritto:
> Given that failing to find a DSI host causes the driver to defer probe,
> make use of dev_err_probe() to log the reason. This makes the defer
> probe reason available and avoids alerting userspace about something
> that is not necessarily an error.
>
> Fixes: 269332997a16 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 29d91493b101..4ee5614a2623 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -2076,10 +2076,8 @@ static int anx7625_setup_dsi_device(struct anx7625_data *ctx)
> };
>
> host = of_find_mipi_dsi_host_by_node(ctx->pdata.mipi_host_node);
> - if (!host) {
> - DRM_DEV_ERROR(dev, "fail to find dsi host.\n");
> - return -EPROBE_DEFER;
> - }
> + if (!host)
> + return dev_err_probe(dev, -EPROBE_DEFER, "fail to find dsi host.\n");
Agreed, but while at it:
1. This is not the only driver doing this, so you might as well go fix all of them
in a series (toshiba tcxxxx, lontium, chipone.... check them, the error message
is exactly the same even, that'd take 3 seconds);
2. I've just noticed that, in this driver, of_node_put() is never called for the
`mipi_host_node`, so the reference is never dropped... but that can come later
and not necessarily in the eventual series that fixes the err message strategy.
In the meanwhile, for this commit
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>
> dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
> if (IS_ERR(dsi)) {
>
> ---
> base-commit: 2ae0a045e6814c8c1d676d6153c605a65746aa29
> change-id: 20240226-anx7625-defer-log-no-dsi-host-c3f9ccbcb287
>
> Best regards,
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] drm/bridge: anx7625: Don't log an error when DSI host can't be found
2024-02-26 21:20 [PATCH] drm/bridge: anx7625: Don't log an error when DSI host can't be found Nícolas F. R. A. Prado
2024-02-28 9:51 ` AngeloGioacchino Del Regno
@ 2024-02-28 12:54 ` Neil Armstrong
1 sibling, 0 replies; 3+ messages in thread
From: Neil Armstrong @ 2024-02-28 12:54 UTC (permalink / raw)
To: Nícolas F. R. A. Prado, Robert Foss
Cc: Andrzej Hajda, Laurent Pinchart, Jonas Karlman, Jernej Skrabec,
Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann,
David Airlie, Daniel Vetter, owen, AngeloGioacchino Del Regno,
kernel, dri-devel, linux-kernel
On 26/02/2024 22:20, Nícolas F. R. A. Prado wrote:
> Given that failing to find a DSI host causes the driver to defer probe,
> make use of dev_err_probe() to log the reason. This makes the defer
> probe reason available and avoids alerting userspace about something
> that is not necessarily an error.
>
> Fixes: 269332997a16 ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 29d91493b101..4ee5614a2623 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -2076,10 +2076,8 @@ static int anx7625_setup_dsi_device(struct anx7625_data *ctx)
> };
>
> host = of_find_mipi_dsi_host_by_node(ctx->pdata.mipi_host_node);
> - if (!host) {
> - DRM_DEV_ERROR(dev, "fail to find dsi host.\n");
> - return -EPROBE_DEFER;
> - }
> + if (!host)
> + return dev_err_probe(dev, -EPROBE_DEFER, "fail to find dsi host.\n");
>
> dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
> if (IS_ERR(dsi)) {
>
> ---
> base-commit: 2ae0a045e6814c8c1d676d6153c605a65746aa29
> change-id: 20240226-anx7625-defer-log-no-dsi-host-c3f9ccbcb287
>
> Best regards,
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-02-28 12:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-02-26 21:20 [PATCH] drm/bridge: anx7625: Don't log an error when DSI host can't be found Nícolas F. R. A. Prado
2024-02-28 9:51 ` AngeloGioacchino Del Regno
2024-02-28 12:54 ` Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®