[PATCH v2 0/2] Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424

[PATCH v2 0/2] Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424

[Kathiravan Thirumoorthy]

With the current settings, complaince tests are failing, especially eye
diagram (Host High-speed Signal Quality) tests. As recommended by the
design team, reuse the IPQ6018 settings.

Merge Strategy:
--------------
Both the patch in the series should be merged together to avoid breaking
the USB feature.

--
Changes in V2
	- Splitted the patch into 2 patches, first revert the commit and
	  then reuse the IPQ6018 data (Vinod K)
	- Dropped the R-b tag from Dmitry
	- Link to v1 -
	  https://lore.kernel.org/linux-arm-msm/20250407-revert_hs_phy_settings-v1-1-ec94e316ea19@oss.qualcomm.com/

---
Kathiravan Thirumoorthy (2):
      Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"
      phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424

 drivers/phy/qualcomm/phy-qcom-qusb2.c | 27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)
---
base-commit: b425262c07a6a643ebeed91046e161e20b944164
change-id: 20250414-revert_hs_phy_settings-47643d2c75ba

Best regards,
-- 
Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>

[PATCH v2 1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"

[Kathiravan Thirumoorthy]

With the current settings, complaince tests especially eye diagram
(Host High-speed Signal Quality) tests are failing. Design team
requested to reuse the IPQ6018 settings to overcome this issue.

So revert the change which introduced the new settings and reuse the
IPQ6018 settings in the subsequent patch.

Fixes: 9c56a1de296e ("phy: qcom-qusb2: add QUSB2 support for IPQ5424")
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 28 ----------------------------
 1 file changed, 28 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 1f5f7df14d5a2ff041fe15aaeb6ec5ce52ab2a81..81b9e9349c3ebb4d303cb040b5c913336bb6b6d6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -151,21 +151,6 @@ static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
 };
 
-static const struct qusb2_phy_init_tbl ipq5424_init_tbl[] = {
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x00),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc3),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
-	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
-	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
-};
-
 static const struct qusb2_phy_init_tbl qcs615_init_tbl[] = {
 	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xc8),
 	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
@@ -359,16 +344,6 @@ static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
 	.autoresume_en   = BIT(0),
 };
 
-static const struct qusb2_phy_cfg ipq5424_phy_cfg = {
-	.tbl            = ipq5424_init_tbl,
-	.tbl_num        = ARRAY_SIZE(ipq5424_init_tbl),
-	.regs           = ipq6018_regs_layout,
-
-	.disable_ctrl   = POWER_DOWN,
-	.mask_core_ready = PLL_LOCKED,
-	.autoresume_en   = BIT(0),
-};
-
 static const struct qusb2_phy_cfg qcs615_phy_cfg = {
 	.tbl            = qcs615_init_tbl,
 	.tbl_num        = ARRAY_SIZE(qcs615_init_tbl),
@@ -954,9 +929,6 @@ static const struct phy_ops qusb2_phy_gen_ops = {
 
 static const struct of_device_id qusb2_phy_of_match_table[] = {
 	{
-		.compatible	= "qcom,ipq5424-qusb2-phy",
-		.data		= &ipq5424_phy_cfg,
-	}, {
 		.compatible	= "qcom,ipq6018-qusb2-phy",
 		.data		= &ipq6018_phy_cfg,
 	}, {

-- 
2.34.1

Re: [PATCH v2 1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"

[Mukesh Kumar Savaliya]

On 4/14/2025 5:22 PM, Kathiravan Thirumoorthy wrote:
> With the current settings, complaince tests especially eye diagram
compliance
> (Host High-speed Signal Quality) tests are failing. Design team
Write it as "recommended by Hardware design document/guide" instead of 
design team.
> requested to reuse the IPQ6018 settings to overcome this issue.
> 
> So revert the change which introduced the new settings and reuse the
> IPQ6018 settings in the subsequent patch.
> 
> Fixes: 9c56a1de296e ("phy: qcom-qusb2: add QUSB2 support for IPQ5424")
> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
> ---
>   drivers/phy/qualcomm/phy-qcom-qusb2.c | 28 ----------------------------
>   1 file changed, 28 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index 1f5f7df14d5a2ff041fe15aaeb6ec5ce52ab2a81..81b9e9349c3ebb4d303cb040b5c913336bb6b6d6 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -151,21 +151,6 @@ static const struct qusb2_phy_init_tbl ipq6018_init_tbl[] = {
>   	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
>   };
>   
> -static const struct qusb2_phy_init_tbl ipq5424_init_tbl[] = {
> -	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
> -	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x00),
> -	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
> -	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc3),
> -	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
> -	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
> -	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
> -	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
> -	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
> -	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
> -	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
> -	QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
> -};
> -
>   static const struct qusb2_phy_init_tbl qcs615_init_tbl[] = {
>   	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xc8),
>   	QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
> @@ -359,16 +344,6 @@ static const struct qusb2_phy_cfg ipq6018_phy_cfg = {
>   	.autoresume_en   = BIT(0),
>   };
>   
> -static const struct qusb2_phy_cfg ipq5424_phy_cfg = {
> -	.tbl            = ipq5424_init_tbl,
> -	.tbl_num        = ARRAY_SIZE(ipq5424_init_tbl),
> -	.regs           = ipq6018_regs_layout,
> -
> -	.disable_ctrl   = POWER_DOWN,
> -	.mask_core_ready = PLL_LOCKED,
> -	.autoresume_en   = BIT(0),
> -};
> -
>   static const struct qusb2_phy_cfg qcs615_phy_cfg = {
>   	.tbl            = qcs615_init_tbl,
>   	.tbl_num        = ARRAY_SIZE(qcs615_init_tbl),
> @@ -954,9 +929,6 @@ static const struct phy_ops qusb2_phy_gen_ops = {
>   
>   static const struct of_device_id qusb2_phy_of_match_table[] = {
>   	{
> -		.compatible	= "qcom,ipq5424-qusb2-phy",
> -		.data		= &ipq5424_phy_cfg,
> -	}, {
>   		.compatible	= "qcom,ipq6018-qusb2-phy",
>   		.data		= &ipq6018_phy_cfg,
>   	}, {
> 

Re: [PATCH v2 1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"

[Kathiravan Thirumoorthy]

On 4/14/2025 7:03 PM, Mukesh Kumar Savaliya wrote:
>
>
> On 4/14/2025 5:22 PM, Kathiravan Thirumoorthy wrote:
>> With the current settings, complaince tests especially eye diagram
> compliance


Ack.


>> (Host High-speed Signal Quality) tests are failing. Design team
> Write it as "recommended by Hardware design document/guide" instead of 
> design team.


Ack.


>> requested to reuse the IPQ6018 settings to overcome this issue.
>>
>> So revert the change which introduced the new settings and reuse the
>> IPQ6018 settings in the subsequent patch.
>>
>> Fixes: 9c56a1de296e ("phy: qcom-qusb2: add QUSB2 support for IPQ5424")
>> Signed-off-by: Kathiravan Thirumoorthy 
>> <kathiravan.thirumoorthy@oss.qualcomm.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-qusb2.c | 28 
>> ----------------------------
>>   1 file changed, 28 deletions(-)
>>
>> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c 
>> b/drivers/phy/qualcomm/phy-qcom-qusb2.c
>> index 
>> 1f5f7df14d5a2ff041fe15aaeb6ec5ce52ab2a81..81b9e9349c3ebb4d303cb040b5c913336bb6b6d6 
>> 100644
>> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
>> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
>> @@ -151,21 +151,6 @@ static const struct qusb2_phy_init_tbl 
>> ipq6018_init_tbl[] = {
>>       QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F),
>>   };
>>   -static const struct qusb2_phy_init_tbl ipq5424_init_tbl[] = {
>> -    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL, 0x14),
>> -    QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0x00),
>> -    QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x53),
>> -    QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE4, 0xc3),
>> -    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30),
>> -    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79),
>> -    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21),
>> -    QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE5, 0x00),
>> -    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
>> -    QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TEST2, 0x14),
>> -    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TEST, 0x80),
>> -    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9f),
>> -};
>> -
>>   static const struct qusb2_phy_init_tbl qcs615_init_tbl[] = {
>>       QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xc8),
>>       QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0xb3),
>> @@ -359,16 +344,6 @@ static const struct qusb2_phy_cfg 
>> ipq6018_phy_cfg = {
>>       .autoresume_en   = BIT(0),
>>   };
>>   -static const struct qusb2_phy_cfg ipq5424_phy_cfg = {
>> -    .tbl            = ipq5424_init_tbl,
>> -    .tbl_num        = ARRAY_SIZE(ipq5424_init_tbl),
>> -    .regs           = ipq6018_regs_layout,
>> -
>> -    .disable_ctrl   = POWER_DOWN,
>> -    .mask_core_ready = PLL_LOCKED,
>> -    .autoresume_en   = BIT(0),
>> -};
>> -
>>   static const struct qusb2_phy_cfg qcs615_phy_cfg = {
>>       .tbl            = qcs615_init_tbl,
>>       .tbl_num        = ARRAY_SIZE(qcs615_init_tbl),
>> @@ -954,9 +929,6 @@ static const struct phy_ops qusb2_phy_gen_ops = {
>>     static const struct of_device_id qusb2_phy_of_match_table[] = {
>>       {
>> -        .compatible    = "qcom,ipq5424-qusb2-phy",
>> -        .data        = &ipq5424_phy_cfg,
>> -    }, {
>>           .compatible    = "qcom,ipq6018-qusb2-phy",
>>           .data        = &ipq6018_phy_cfg,
>>       }, {
>>
>

[PATCH v2 2/2] phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424

[Kathiravan Thirumoorthy]

With the settings used in the commit 9c56a1de296e ("phy: qcom-qusb2: add
QUSB2 support for IPQ5424"), complaince test cases especially
eye-diagram (Host High-speed Signal Quality) tests are failing.

Reuse the IPQ6018 settings for IPQ5424 as suggested by design team,
which helps to meet all the complaince requirement test cases.

Fixes: 9c56a1de296e ("phy: qcom-qusb2: add QUSB2 support for IPQ5424")
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 81b9e9349c3ebb4d303cb040b5c913336bb6b6d6..49c37c53b38e70db2a1591081a1a12db7092555d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -929,6 +929,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
 
 static const struct of_device_id qusb2_phy_of_match_table[] = {
 	{
+		.compatible	= "qcom,ipq5424-qusb2-phy",
+		.data		= &ipq6018_phy_cfg,
+	}, {
 		.compatible	= "qcom,ipq6018-qusb2-phy",
 		.data		= &ipq6018_phy_cfg,
 	}, {

-- 
2.34.1

Re: [PATCH v2 2/2] phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424

[Mukesh Kumar Savaliya]

On 4/14/2025 5:22 PM, Kathiravan Thirumoorthy wrote:
> With the settings used in the commit 9c56a1de296e ("phy: qcom-qusb2: add
> QUSB2 support for IPQ5424"), complaince test cases especially
compliance
> eye-diagram (Host High-speed Signal Quality) tests are failing.
> 
> Reuse the IPQ6018 settings for IPQ5424 as suggested by design team,
No mention of team. Write it as generic.
> which helps to meet all the complaince requirement test cases.
compliance
> 
> Fixes: 9c56a1de296e ("phy: qcom-qusb2: add QUSB2 support for IPQ5424")
> Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
> ---
>   drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> index 81b9e9349c3ebb4d303cb040b5c913336bb6b6d6..49c37c53b38e70db2a1591081a1a12db7092555d 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
> @@ -929,6 +929,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
>   
>   static const struct of_device_id qusb2_phy_of_match_table[] = {
>   	{
> +		.compatible	= "qcom,ipq5424-qusb2-phy",
> +		.data		= &ipq6018_phy_cfg,
> +	}, {
>   		.compatible	= "qcom,ipq6018-qusb2-phy",
>   		.data		= &ipq6018_phy_cfg,
>   	}, {
> 

Re: [PATCH v2 0/2] Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424

[Mukesh Kumar Savaliya]

On 4/14/2025 5:22 PM, Kathiravan Thirumoorthy wrote:
> With the current settings, complaince tests are failing, especially eye
compliance
> diagram (Host High-speed Signal Quality) tests. As recommended by the
> design team, reuse the IPQ6018 settings.
> 
> Merge Strategy:
> --------------
> Both the patch in the series should be merged together to avoid breaking
> the USB feature.
> 
> --
> Changes in V2
> 	- Splitted the patch into 2 patches, first revert the commit and
> 	  then reuse the IPQ6018 data (Vinod K)
> 	- Dropped the R-b tag from Dmitry
> 	- Link to v1 -
> 	  https://lore.kernel.org/linux-arm-msm/20250407-revert_hs_phy_settings-v1-1-ec94e316ea19@oss.qualcomm.com/
> 
> ---
> Kathiravan Thirumoorthy (2):
>        Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"
>        phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424
> 
>   drivers/phy/qualcomm/phy-qcom-qusb2.c | 27 +--------------------------
>   1 file changed, 1 insertion(+), 26 deletions(-)
> ---
> base-commit: b425262c07a6a643ebeed91046e161e20b944164
> change-id: 20250414-revert_hs_phy_settings-47643d2c75ba
> 
> Best regards,