From: Simon Wunderlich <sw@simonwunderlich.de>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
linux-mtd@lists.infradead.org, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
linux-mips@vger.kernel.org, Hauke Mehrtens <hauke@hauke-m.de>,
Aleksander Jan Bajkowski <olek2@wp.pl>,
John Crispin <john@phrozen.org>,
Sebastien Decourriere <sebtx452@gmail.com>,
Yangtao Li <frank.li@vivo.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/5] dt-bindings: mtd: Add lantiq,nor
Date: Tue, 17 Nov 2026 17:45:36 +0100 [thread overview]
Message-ID: <5155531.6YUMPnJmAY@prime> (raw)
In-Reply-To: <87fqwzn3tq.fsf@bootlin.com>
On Tuesday, November 17, 2026 11:35:13 AM Central European Standard Time
Miquel Raynal wrote:
> Hi Simon,
>
> On 14/11/2026 at 11:06:04 +01, Simon Wunderlich <sw@simonwunderlich.de>
wrote:
> > The NOR flash on the External Bus Unit (EBU) of Lantiq SoCs is handled
> > by the lantiq-flash driver and used by danube_easy50712.dts, but its
> > binding was never documented.
> >
> > Add a schema for it, including a new optional lantiq,ebu-swap-check
> > property. Some boot loaders, like the BOSS bootmonitor on the bintec
> > elmeg RS123 and RS353, enable the EBU's own endianness swapping for the
> > flash chip select (EBU_BUSCON0 bit 30), and the flash then appears at
> > its unswapped addresses. Whether that bit can be trusted depends on the
> > SoC: it only works on VR9 (xRX200) from revision 1.2 and on AR10
> > (xRX300), and Falcon has no such register. A board property instead of
> > a list of SoC revisions in the driver was requested in the review of an
> > earlier attempt at this. The property does not state the bit's value,
> > so a board keeps working with either boot loader setting.
> >
> > Link:
> > https://lists.infradead.org/pipermail/linux-mtd/2017-January/071749.html
> > Link:
> > https://lists.infradead.org/pipermail/linux-mtd/2017-January/071818.html
> > Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
>
> Let's be honest, I am not very familiar with that MTD area and all the
> legacy content is has, but would it be a lot more work to add lantiq as
> a physmap variant? I don't like much the fact that you describe the
> flash without describing the EBU. Physmap versions typically are matched
> using the more specific compatible (lantiq,ebu?) and the cfi-flash
> fallback. All your tweaks are EBU/machine/integration details, not
> related to the flash itself.
>
> One consequence of not modeling the controller is your need for
> EXPORT_SYMBOL_GPL(ltq_ebu_membase) in patch 3/5, which is quite a hack.
>
> Thanks,
> Miquèl
Hi Miquèl,
thank you for applying patch 1!
About physmap: you were right, and this was actually a great hint. I tested on
the my RS123: with the EBU swap that its boot loader enables, the flash is
simply a plain CFI flash. With compatible = "cfi-flash" and the generic physmap
driver, probing, reads (identical to what lantiq-flash reads, unaligned reads
included), erase and write all work. So this board needs no lantiq-flash change
at all, and I'm dropping patches 2 to 5. There won't be a v2.
Turning lantiq-flash itself into a physmap variant for the boards with the
classic U-Boot setup would probably be the cleaner model, but I don't have
such a board to test it, so I'm leaving that alone for now.
Thank you again!
Simon
next prev parent reply other threads:[~2026-11-17 16:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-14 10:06 [PATCH 0/5] mtd: maps: lantiq-flash: support boot loaders using the EBU endianness swap Simon Wunderlich
2026-11-14 10:06 ` [PATCH 1/5] mtd: maps: lantiq-flash: fix NULL pointer dereference on probe Simon Wunderlich
2026-11-14 10:06 ` [PATCH 2/5] dt-bindings: mtd: Add lantiq,nor Simon Wunderlich
2026-11-17 10:35 ` Miquel Raynal
2026-11-17 16:45 ` Simon Wunderlich [this message]
2026-11-14 10:06 ` [PATCH 3/5] mips: lantiq: xway: sysctrl: export ltq_ebu_membase Simon Wunderlich
2026-11-14 10:06 ` [PATCH 4/5] mtd: maps: lantiq-flash: honour the EBU's own endianness swap Simon Wunderlich
2026-11-14 10:06 ` [PATCH 5/5] mips: lantiq: danube: rename NOR node on EASY50712 reference board Simon Wunderlich
2026-11-17 13:37 ` [PATCH 0/5] mtd: maps: lantiq-flash: support boot loaders using the EBU endianness swap Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5155531.6YUMPnJmAY@prime \
--to=sw@simonwunderlich.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=frank.li@vivo.com \
--cc=hauke@hauke-m.de \
--cc=john@phrozen.org \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=olek2@wp.pl \
--cc=richard@nod.at \
--cc=robh@kernel.org \
--cc=sebtx452@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®