From: Eduardo Valentin <eduardo.valentin@ti.com>
To: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: <linux-pm@vger.kernel.org>, Zhang Rui <rui.zhang@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>,
<linux-samsung-soc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <amit.kachhap@gmail.com>,
Kukjin Kim <kgene.kim@samsung.com>, <jonghwa3.lee@samsung.com>
Subject: Re: [PATCH V6 13/30] thermal: exynos: Add support for instance based register/unregister
Date: Wed, 19 Jun 2013 18:40:04 -0400 [thread overview]
Message-ID: <51C23344.5050007@ti.com> (raw)
In-Reply-To: <1371451599-31035-14-git-send-email-amit.daniel@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 9385 bytes --]
Hi,
On 17-06-2013 02:46, Amit Daniel Kachhap wrote:
> This code modifies the thermal driver to have multiple thermal zone
> support by replacing the global thermal zone variable with device data
> member of thermal_zone_device.
>
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
> ---
> drivers/thermal/samsung/exynos_thermal_common.c | 36 ++++++++++++++--------
> drivers/thermal/samsung/exynos_thermal_common.h | 9 +++--
> drivers/thermal/samsung/exynos_tmu.c | 15 +++++----
> 3 files changed, 36 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c
> index dd49c9f..2af1e3b 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.c
> +++ b/drivers/thermal/samsung/exynos_thermal_common.c
> @@ -36,12 +36,11 @@ struct exynos_thermal_zone {
> bool bind;
> };
>
> -static struct exynos_thermal_zone *th_zone;
> -
> /* Get mode callback functions for thermal zone */
> static int exynos_get_mode(struct thermal_zone_device *thermal,
> enum thermal_device_mode *mode)
> {
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> if (th_zone)
> *mode = th_zone->mode;
> return 0;
> @@ -51,25 +50,26 @@ static int exynos_get_mode(struct thermal_zone_device *thermal,
> static int exynos_set_mode(struct thermal_zone_device *thermal,
> enum thermal_device_mode mode)
> {
> - if (!th_zone->therm_dev) {
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> + if (!th_zone) {
> pr_notice("thermal zone not registered\n");
> return 0;
> }
>
> - mutex_lock(&th_zone->therm_dev->lock);
> + mutex_lock(&thermal->lock);
>
> if (mode == THERMAL_DEVICE_ENABLED &&
> !th_zone->sensor_conf->trip_data.trigger_falling)
> - th_zone->therm_dev->polling_delay = IDLE_INTERVAL;
> + thermal->polling_delay = IDLE_INTERVAL;
> else
> - th_zone->therm_dev->polling_delay = 0;
> + thermal->polling_delay = 0;
>
> - mutex_unlock(&th_zone->therm_dev->lock);
> + mutex_unlock(&thermal->lock);
>
> th_zone->mode = mode;
> - thermal_zone_device_update(th_zone->therm_dev);
> + thermal_zone_device_update(thermal);
> pr_info("thermal polling set for duration=%d msec\n",
> - th_zone->therm_dev->polling_delay);
> + thermal->polling_delay);
> return 0;
> }
>
> @@ -96,6 +96,8 @@ static int exynos_get_trip_type(struct thermal_zone_device *thermal, int trip,
> static int exynos_get_trip_temp(struct thermal_zone_device *thermal, int trip,
> unsigned long *temp)
> {
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> +
> if (trip < GET_TRIP(MONITOR_ZONE) || trip > GET_TRIP(PANIC_ZONE))
> return -EINVAL;
>
> @@ -122,6 +124,7 @@ static int exynos_bind(struct thermal_zone_device *thermal,
> {
> int ret = 0, i, tab_size, level;
> struct freq_clip_table *tab_ptr, *clip_data;
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> struct thermal_sensor_conf *data = th_zone->sensor_conf;
>
> tab_ptr = (struct freq_clip_table *)data->cooling_data.freq_data;
> @@ -168,6 +171,7 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
> struct thermal_cooling_device *cdev)
> {
> int ret = 0, i, tab_size;
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> struct thermal_sensor_conf *data = th_zone->sensor_conf;
>
> if (th_zone->bind == false)
> @@ -210,6 +214,7 @@ static int exynos_unbind(struct thermal_zone_device *thermal,
> static int exynos_get_temp(struct thermal_zone_device *thermal,
> unsigned long *temp)
> {
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
> void *data;
>
> if (!th_zone->sensor_conf) {
> @@ -229,6 +234,7 @@ static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
> {
> void *data;
> int ret = -EINVAL;
> + struct exynos_thermal_zone *th_zone = thermal->devdata;
>
> if (!th_zone->sensor_conf) {
> pr_info("Temperature sensor not initialised\n");
> @@ -276,11 +282,12 @@ static struct thermal_zone_device_ops const exynos_dev_ops = {
> * This function may be called from interrupt based temperature sensor
> * when threshold is changed.
> */
> -void exynos_report_trigger(void)
> +void exynos_report_trigger(struct thermal_sensor_conf *conf)
> {
> unsigned int i;
> char data[10];
> char *envp[] = { data, NULL };
> + struct exynos_thermal_zone *th_zone = conf->pzone_data;
>
> if (!th_zone || !th_zone->therm_dev)
> return;
> @@ -321,6 +328,7 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> {
> int ret;
> struct cpumask mask_val;
> + struct exynos_thermal_zone *th_zone;
>
> if (!sensor_conf || !sensor_conf->read_temperature) {
> pr_err("Temperature sensor not initialised\n");
> @@ -342,7 +350,7 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> th_zone->cool_dev_size++;
>
> th_zone->therm_dev = thermal_zone_device_register(sensor_conf->name,
> - EXYNOS_ZONE_COUNT, 0, NULL, &exynos_dev_ops, NULL, 0,
> + EXYNOS_ZONE_COUNT, 0, th_zone, &exynos_dev_ops, NULL, 0,
> sensor_conf->trip_data.trigger_falling ?
> 0 : IDLE_INTERVAL);
>
> @@ -352,20 +360,22 @@ int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf)
> goto err_unregister;
> }
> th_zone->mode = THERMAL_DEVICE_ENABLED;
> + sensor_conf->pzone_data = th_zone;
>
> pr_info("Exynos: Kernel Thermal management registered\n");
>
> return 0;
>
> err_unregister:
> - exynos_unregister_thermal();
> + exynos_unregister_thermal(sensor_conf);
> return ret;
> }
>
> /* Un-Register with the in-kernel thermal management */
> -void exynos_unregister_thermal(void)
> +void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf)
> {
> int i;
> + struct exynos_thermal_zone *th_zone = sensor_conf->pzone_data;
>
> if (!th_zone)
> return;
> diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> index fd789a5..a845c2d 100644
> --- a/drivers/thermal/samsung/exynos_thermal_common.h
> +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> @@ -84,22 +84,23 @@ struct thermal_sensor_conf {
> struct thermal_trip_point_conf trip_data;
> struct thermal_cooling_conf cooling_data;
> void *private_data;
> + void *pzone_data;
> };
>
> /*Functions used exynos based thermal sensor driver*/
> #ifdef CONFIG_EXYNOS_THERMAL_CORE
> -void exynos_unregister_thermal(void);
> +void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf);
> int exynos_register_thermal(struct thermal_sensor_conf *sensor_conf);
> -void exynos_report_trigger(void);
> +void exynos_report_trigger(struct thermal_sensor_conf *sensor_conf);
> #else
> static inline void
> -exynos_unregister_thermal(void) { return; }
> +exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) { return; }
>
> static inline int
> exynos_register_thermal(struct thermal_sensor_conf *sensor_conf) { return 0; }
>
> static inline void
> -exynos_report_trigger(void) { return; }
> +exynos_report_trigger(struct thermal_sensor_conf *sensor_conf) { return; }
>
> #endif /* CONFIG_EXYNOS_THERMAL_CORE */
> #endif /* _EXYNOS_THERMAL_COMMON_H */
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index f6f63ca..a7bba69 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -345,6 +345,12 @@ static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
> { return -EINVAL; }
> #endif/*CONFIG_THERMAL_EMULATION*/
>
> +static struct thermal_sensor_conf exynos_sensor_conf = {
> + .name = "exynos-therm",
> + .read_temperature = (int (*)(void *))exynos_tmu_read,
> + .write_emul_temp = exynos_tmu_set_emulation,
> +};
> +
> static void exynos_tmu_work(struct work_struct *work)
> {
> struct exynos_tmu_data *data = container_of(work,
> @@ -353,7 +359,7 @@ static void exynos_tmu_work(struct work_struct *work)
> const struct exynos_tmu_registers *reg = pdata->registers;
> unsigned int val_irq;
>
> - exynos_report_trigger();
> + exynos_report_trigger(&exynos_sensor_conf);
> mutex_lock(&data->lock);
> clk_enable(data->clk);
>
> @@ -377,11 +383,6 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
>
> return IRQ_HANDLED;
> }
> -static struct thermal_sensor_conf exynos_sensor_conf = {
> - .name = "exynos-therm",
> - .read_temperature = (int (*)(void *))exynos_tmu_read,
> - .write_emul_temp = exynos_tmu_set_emulation,
> -};
>
> #ifdef CONFIG_OF
> static const struct of_device_id exynos_tmu_match[] = {
> @@ -541,7 +542,7 @@ static int exynos_tmu_remove(struct platform_device *pdev)
>
> exynos_tmu_control(pdev, false);
>
> - exynos_unregister_thermal();
> + exynos_unregister_thermal(&exynos_sensor_conf);
>
> clk_unprepare(data->clk);
>
>
--
You have got to be excited about what you are doing. (L. Lamport)
Eduardo Valentin
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 295 bytes --]
next prev parent reply other threads:[~2013-06-19 22:40 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-17 6:46 [PATCH V6 00/30] thermal: exynos: Re-structure driver and add support for exynos5440 Amit Daniel Kachhap
2013-06-17 6:46 ` [PATCH V6 01/30] thermal: exynos: Moving exynos thermal files into samsung directory Amit Daniel Kachhap
2013-06-19 18:46 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 02/30] thermal: exynos: Use ARCH_HAS_BANDGAP config to know the supported soc's Amit Daniel Kachhap
2013-06-19 18:46 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 03/30] thermal: exynos: Remove un-necessary CPU_THERMAL dependency Amit Daniel Kachhap
2013-06-19 18:48 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 04/30] thermal: exynos: Bifurcate exynos thermal common and tmu controller code Amit Daniel Kachhap
2013-06-19 18:45 ` Eduardo Valentin
2013-06-21 1:50 ` amit daniel kachhap
2013-06-21 14:30 ` Eduardo Valentin
2013-06-19 19:01 ` Eduardo Valentin
2013-06-21 2:48 ` amit daniel kachhap
2013-06-21 14:23 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 05/30] thermal: exynos: Rename exynos_thermal.c to exynos_tmu.c Amit Daniel Kachhap
2013-06-17 6:46 ` [PATCH V6 06/30] thermal: exynos: Move exynos_thermal.h from include/* to driver/* folder Amit Daniel Kachhap
2013-06-19 19:18 ` Eduardo Valentin
2013-06-19 19:20 ` Eduardo Valentin
2013-06-21 4:34 ` amit daniel kachhap
2013-06-21 4:33 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 07/30] thermal: exynos: Bifurcate exynos tmu driver and configuration data Amit Daniel Kachhap
2013-06-19 19:35 ` Eduardo Valentin
2013-06-19 19:43 ` Eduardo Valentin
2013-06-21 5:06 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 08/30] thermal: exynos: Add missing definations and code cleanup Amit Daniel Kachhap
2013-06-19 19:55 ` Eduardo Valentin
2013-06-21 2:01 ` amit daniel kachhap
2013-06-21 14:31 ` Eduardo Valentin
2013-06-24 3:57 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 09/30] thermal: exynos: Add extra entries in the tmu platform data Amit Daniel Kachhap
2013-06-19 20:19 ` Eduardo Valentin
2013-06-19 20:52 ` Eduardo Valentin
2013-06-21 8:50 ` amit daniel kachhap
2013-06-21 14:26 ` Eduardo Valentin
2013-06-21 6:39 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 10/30] thermal: exynos: Move register definitions from driver to data file Amit Daniel Kachhap
2013-06-19 21:02 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 11/30] thermal: exynos: Support thermal tripping Amit Daniel Kachhap
2013-06-19 22:23 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 12/30] thermal: exynos: Fix to clear only the generated interrupts Amit Daniel Kachhap
2013-06-19 22:26 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 13/30] thermal: exynos: Add support for instance based register/unregister Amit Daniel Kachhap
2013-06-19 22:40 ` Eduardo Valentin [this message]
2013-06-17 6:46 ` [PATCH V6 14/30] thermal: exynos: Modify private_data to appropriate name driver_data Amit Daniel Kachhap
2013-06-19 22:44 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 15/30] thermal: exynos: Return success even if no cooling data supplied Amit Daniel Kachhap
2013-06-19 22:54 ` Eduardo Valentin
2013-06-19 23:04 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 16/30] thermal: exynos: Make the zone handling use trip information Amit Daniel Kachhap
2013-06-19 23:03 ` Eduardo Valentin
2013-06-21 12:30 ` amit daniel kachhap
2013-06-21 14:35 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 17/30] thermal: exynos: Remove non DT based support Amit Daniel Kachhap
2013-06-19 23:09 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 18/30] thermal: exynos: Add support to handle many instances of TMU Amit Daniel Kachhap
2013-06-19 23:27 ` Eduardo Valentin
2013-06-21 12:46 ` amit daniel kachhap
2013-06-21 14:28 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 19/30] thermal: exynos: Add TMU features to check instead of using SOC type Amit Daniel Kachhap
2013-06-19 23:35 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 20/30] thermal: exynos: use device resource management infrastructure Amit Daniel Kachhap
2013-06-19 23:42 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 21/30] ARM: dts: thermal: exynos4: Add documentation for Exynos SoC thermal bindings Amit Daniel Kachhap
2013-06-19 23:45 ` Eduardo Valentin
2013-06-21 14:34 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 22/30] thermal: exynos: Add support to access common register for multistance Amit Daniel Kachhap
2013-06-19 23:53 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 23/30] thermal: exynos: Add driver support for exynos5440 TMU sensor Amit Daniel Kachhap
2013-06-20 2:06 ` Eduardo Valentin
2013-06-21 15:17 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 24/30] thermal: exynos: Add thermal configuration data " Amit Daniel Kachhap
2013-06-20 2:18 ` Eduardo Valentin
2013-06-21 15:19 ` amit daniel kachhap
2013-06-21 15:21 ` amit daniel kachhap
2013-06-17 6:46 ` [PATCH V6 25/30] thermal: exynos: Fix to set the second point correction value Amit Daniel Kachhap
2013-06-20 2:22 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 26/30] thermal: exynos: Add hardware mode thermal calibration support Amit Daniel Kachhap
2013-06-20 2:30 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 27/30] Documentation: thermal: Explain the exynos thermal driver model Amit Daniel Kachhap
2013-06-20 2:32 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 28/30] thermal: exynos: Support for TMU regulator defined at device tree Amit Daniel Kachhap
2013-06-20 2:33 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 29/30] ARM: dts: Add device tree node for exynos5440 TMU controller Amit Daniel Kachhap
2013-06-20 2:37 ` Eduardo Valentin
2013-06-17 6:46 ` [PATCH V6 30/30] arm: exynos: enable ARCH_HAS_BANDGAP Amit Daniel Kachhap
2013-06-19 18:47 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51C23344.5050007@ti.com \
--to=eduardo.valentin@ti.com \
--cc=amit.daniel@samsung.com \
--cc=amit.kachhap@gmail.com \
--cc=jonghwa3.lee@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome