From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Stephen Boyd <sboyd@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Rob Herring <robh@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] clk: qcom: clk-alpha-pll: Add Pongo PLL
Date: Wed, 4 Dec 2024 10:25:09 +0100 [thread overview]
Message-ID: <52f7ce30-0159-4779-982d-7714d0b45ae3@linaro.org> (raw)
In-Reply-To: <aed888b8c2f49eaaffcd6cfbdda84078.sboyd@kernel.org>
On 03/12/2024 23:07, Stephen Boyd wrote:
>> - for (count = 200; count > 0; count--) {
>> + /* Pongo PLLs using a 32KHz reference can take upwards of 1500us to lock. */
>> + for (count = 1500; count > 0; count--) {
>> ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
>> if (ret)
>> return ret;
>> @@ -378,6 +403,13 @@ static int wait_for_pll(struct clk_alpha_pll *pll, u32 mask, bool inverse,
>> udelay(1);
>> }
>>
>> + /* Called with clocks already registered ... */
>> + if (pll->clkr.hw.core)
>> + name = clk_hw_get_name(&pll->clkr.hw);
>> + else
>> + /* or before registering, when init data is present */
>> + name = pll->clkr.hw.init->name;
>
> This is sad. Why can't we enable the PLL from the clk prepare/enable
> path? PLLs are typically calibrated during clk_prepare().
I don't know. I'll move it to prepare() and see what happens.
>
>> +
>> WARN(1, "%s failed to %s!\n", name, action);
>> return -ETIMEDOUT;
>> }
>> @@ -2524,6 +2556,129 @@ const struct clk_ops clk_alpha_pll_reset_lucid_evo_ops = {
>> };
>> EXPORT_SYMBOL_GPL(clk_alpha_pll_reset_lucid_evo_ops);
>>
>> +static int alpha_pll_pongo_elu_enable(struct clk_hw *hw)
>> +{
>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>> + struct regmap *regmap = pll->clkr.regmap;
>> + int ret;
>> +
>> + /* Check if PLL is already enabled */
>> + if (trion_pll_is_enabled(pll, regmap))
>> + return 0;
>> +
>> + ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
>> + if (ret)
>> + return ret;
>> +
>> + /* Set operation mode to RUN */
>> + regmap_write(regmap, PLL_OPMODE(pll), PLL_RUN);
>> +
>> + ret = wait_for_pll_enable_lock(pll);
>> + if (ret)
>> + return ret;
>> +
>> + /* Enable the global PLL outputs */
>> + ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
>> + if (ret)
>> + return ret;
>> +
>> + /* Ensure that the write above goes through before returning. */
>> + mb();
>> +
>> + return ret;
>> +}
>> +
>> +static void alpha_pll_pongo_elu_disable(struct clk_hw *hw)
>> +{
>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>> + struct regmap *regmap = pll->clkr.regmap;
>> + int ret;
>> +
>> + /* Disable the global PLL output */
>> + ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
>> + if (ret)
>> + return;
>> +
>> + /* Place the PLL mode in STANDBY */
>> + regmap_write(regmap, PLL_OPMODE(pll), PLL_STANDBY);
>> +}
>> +
>> +static unsigned long alpha_pll_pongo_elu_recalc_rate(struct clk_hw *hw,
>> + unsigned long parent_rate)
>> +{
>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>> + struct regmap *regmap = pll->clkr.regmap;
>> + u32 l;
>> +
>> + if (regmap_read(regmap, PLL_L_VAL(pll), &l))
>> + return 0;
>> +
>> + l &= PONGO_PLL_L_VAL_MASK;
>> +
>> + return alpha_pll_calc_rate(parent_rate, l, 0, pll_alpha_width(pll));
>> +}
>> +
>> +const struct clk_ops clk_alpha_pll_pongo_elu_ops = {
>> + .enable = alpha_pll_pongo_elu_enable,
>> + .disable = alpha_pll_pongo_elu_disable,
>> + .recalc_rate = alpha_pll_pongo_elu_recalc_rate,
>> +};
>> +EXPORT_SYMBOL(clk_alpha_pll_pongo_elu_ops);
>
> GPL please.
Ack (and one more as well)
Best regards,
Krzysztof
next prev parent reply other threads:[~2024-12-04 9:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-28 15:07 [PATCH 0/3] clk: qcom: sm8750: Add sm8750-dispcc clock controller Krzysztof Kozlowski
2024-11-28 15:07 ` [PATCH 1/3] dt-bindings: clock: qcom,sm8550-dispcc: Add SM8750 DISPCC Krzysztof Kozlowski
2024-11-28 17:12 ` Conor Dooley
2024-11-28 17:38 ` Krzysztof Kozlowski
2024-11-29 15:33 ` Conor Dooley
2024-11-28 15:08 ` [PATCH 2/3] clk: qcom: clk-alpha-pll: Add Pongo PLL Krzysztof Kozlowski
2024-12-03 22:07 ` Stephen Boyd
2024-12-04 9:25 ` Krzysztof Kozlowski [this message]
2024-11-28 15:08 ` [PATCH 3/3] clk: qcom: dispcc-sm8750: Add SM8750 Display clock controller Krzysztof Kozlowski
2024-12-03 22:09 ` Stephen Boyd
2024-12-04 10:05 ` Krzysztof Kozlowski
2024-12-04 17:49 ` Taniya Das
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52f7ce30-0159-4779-982d-7714d0b45ae3@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®