* [PATCH v6 0/3] regulator: max77686/trats2: Disable some regulators in suspend
@ 2014-10-29 11:14 Krzysztof Kozlowski
2014-10-29 11:14 ` [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs Krzysztof Kozlowski
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2014-10-29 11:14 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, linux-kernel, Ben Dooks, Kukjin Kim,
Russell King, linux-arm-kernel, linux-samsung-soc, devicetree
Cc: Kyungmin Park, Marek Szyprowski, Bartlomiej Zolnierkiewicz,
Javier Martinez Canillas, Chanwoo Choi, Krzysztof Kozlowski
Hi,
Changes since v5
================
1. Remove patch 1 and 2 - applied.
2. Patch 1/3: remove suspend_enable functions (suggested by Mark Brown).
3. Patch 1/3: Add Javier's reviewed-by.
4. Add patch 2/3: remove suspend_enable for max77802 also.
Changes since v4
================
1. New patch: 2/4. Store the current value of opmode in
non-shifted form. Along with changes in defines used for opmodes
this simplifies everything a lot. Suggested by Javier.
2. Drop Javier's review-by from patch 1 because I changed the
defines to cover both LDO and buck at the same time.
3. Patch 3/4: adding suspend disable is now simpler - just re-use
the existing function.
Changes since v3
================
1. Dropped patch 3/4 ("mfd/regulator: dt-bindings: max77686: Document
regulators off in suspend"), applied by Lee Jones.
2. Patch 2/3: Fix missing shift when checking if current opmode is
equal to off in suspend. The shift is various so I added a simple
function max77686_set_opmode_enable(). Dropped Javier's review-by.
3. Patch 1/3: Add Javier's review-by.
4. Patch 3/3: Add Chanwoo's review-by.
Changes since v2
================
1. Patch 1/4: Fully describe different values used for controlling
the regulators (low power modes, enable, disable). Remove "opmode"
from new defines. Suggested by Javier.
2. Patch 2/4: minor nits after changing patch 1.
3. Add Javier's reviewed-by to 2, 3 and 4 patch.
4. Patch 3/4 (changes in documentation) should be picked up by Lee
Jones but I'm resending it anyway.
Changes since v1
================
1. Add patch 1/4 and 3/4.
2. Patch 2/4: Extend existing set_suspend_disable (for bucks) with
LDO support. Implement set_suspend_enable. Suggested by Javier.
3. Patch 4/4: Add regulator suspend properties only to regulators
actually supporting this. Other regulators, not implementing
suspend enable/disable, will warn ("VCC_1.8V_IO: No configuration").
4. Patch 4/4: In suspend enable VHSIC_1.0V and VHSIC_1.8V regulators.
Suggested by Chanwoo Choi.
Description
===========
This patchset makes use of Javier Martinez Cainllas changes [1].
It allows disabling some of the regulators during suspend to RAM.
Javier's patchset is necessary only to test it.
[1] [PATCH v3 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish
https://lkml.org/lkml/2014/10/20/545
Best regards,
Krzysztof
Krzysztof Kozlowski (3):
regulator: max77686: Add suspend disable for some LDOs
regulator: max77802: Remove suspend_enable
ARM: dts: exynos4412-trats: Add suspend configuration for max77686
regulators
arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++++++++--------------
drivers/regulator/max77686.c | 12 ++++--
drivers/regulator/max77802.c | 4 --
3 files changed, 50 insertions(+), 38 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs
2014-10-29 11:14 [PATCH v6 0/3] regulator: max77686/trats2: Disable some regulators in suspend Krzysztof Kozlowski
@ 2014-10-29 11:14 ` Krzysztof Kozlowski
2014-10-31 12:43 ` Mark Brown
2014-10-29 11:14 ` [PATCH v6 2/3] regulator: max77802: Remove suspend_enable Krzysztof Kozlowski
2014-10-29 11:14 ` [PATCH v6 3/3] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators Krzysztof Kozlowski
2 siblings, 1 reply; 6+ messages in thread
From: Krzysztof Kozlowski @ 2014-10-29 11:14 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, linux-kernel, Ben Dooks, Kukjin Kim,
Russell King, linux-arm-kernel, linux-samsung-soc, devicetree
Cc: Kyungmin Park, Marek Szyprowski, Bartlomiej Zolnierkiewicz,
Javier Martinez Canillas, Chanwoo Choi, Krzysztof Kozlowski
Some LDOs of Maxim 77686 PMIC support disabling during system suspend
(LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
of set_suspend_mode function. In that case the mode was one of:
- disable,
- normal mode,
- low power mode.
However there are no bindings for setting the mode during suspend.
Add suspend disable for LDO regulators supporting this. Re-use existing
max77686_buck_set_suspend_disable() function. This helps reducing
energy consumption during system sleep.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
drivers/regulator/max77686.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index 2ebc4257425b..f960cfc7fdc6 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -99,8 +99,8 @@ static unsigned int max77686_get_opmode_shift(int id)
}
}
-/* Some BUCKS supports Normal[ON/OFF] mode during suspend */
-static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
+/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
+static int max77686_set_suspend_disable(struct regulator_dev *rdev)
{
unsigned int val, shift;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
@@ -195,6 +195,9 @@ static int max77686_enable(struct regulator_dev *rdev)
shift = max77686_get_opmode_shift(id);
+ if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
+ max77686->opmode[id] = MAX77686_NORMAL;
+
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
max77686->opmode[id] << shift);
@@ -247,6 +250,7 @@ static struct regulator_ops max77686_ldo_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_mode = max77686_ldo_set_suspend_mode,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck1_ops = {
@@ -258,7 +262,7 @@ static struct regulator_ops max77686_buck1_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_disable = max77686_buck_set_suspend_disable,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck_dvs_ops = {
@@ -271,7 +275,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77686_set_ramp_delay,
- .set_suspend_disable = max77686_buck_set_suspend_disable,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
#define regulator_desc_ldo(num) { \
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v6 2/3] regulator: max77802: Remove suspend_enable
2014-10-29 11:14 [PATCH v6 0/3] regulator: max77686/trats2: Disable some regulators in suspend Krzysztof Kozlowski
2014-10-29 11:14 ` [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs Krzysztof Kozlowski
@ 2014-10-29 11:14 ` Krzysztof Kozlowski
2014-10-29 11:34 ` Javier Martinez Canillas
2014-10-29 11:14 ` [PATCH v6 3/3] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators Krzysztof Kozlowski
2 siblings, 1 reply; 6+ messages in thread
From: Krzysztof Kozlowski @ 2014-10-29 11:14 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, linux-kernel, Ben Dooks, Kukjin Kim,
Russell King, linux-arm-kernel, linux-samsung-soc, devicetree
Cc: Kyungmin Park, Marek Szyprowski, Bartlomiej Zolnierkiewicz,
Javier Martinez Canillas, Chanwoo Choi, Krzysztof Kozlowski
The Maxim 77802 PMIC regulators do not have special enable configuration
for suspend. The driver instead enabled them manually which is not a
best way to deal with suspend.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
drivers/regulator/max77802.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index 5839c4509e1f..b9958d927297 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -295,7 +295,6 @@ static struct regulator_ops max77802_ldo_ops_logic1 = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_enable = max77802_enable,
.set_suspend_disable = max77802_set_suspend_disable,
.set_suspend_mode = max77802_set_suspend_mode,
};
@@ -328,7 +327,6 @@ static struct regulator_ops max77802_buck_16_dvs_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_4bit,
- .set_suspend_enable = max77802_enable,
.set_suspend_disable = max77802_set_suspend_disable,
};
@@ -343,7 +341,6 @@ static struct regulator_ops max77802_buck_234_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_2bit,
- .set_suspend_enable = max77802_enable,
.set_suspend_disable = max77802_set_suspend_disable,
.set_suspend_mode = max77802_set_suspend_mode,
};
@@ -359,7 +356,6 @@ static struct regulator_ops max77802_buck_dvs_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_2bit,
- .set_suspend_enable = max77802_enable,
.set_suspend_disable = max77802_set_suspend_disable,
};
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v6 3/3] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators
2014-10-29 11:14 [PATCH v6 0/3] regulator: max77686/trats2: Disable some regulators in suspend Krzysztof Kozlowski
2014-10-29 11:14 ` [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs Krzysztof Kozlowski
2014-10-29 11:14 ` [PATCH v6 2/3] regulator: max77802: Remove suspend_enable Krzysztof Kozlowski
@ 2014-10-29 11:14 ` Krzysztof Kozlowski
2 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2014-10-29 11:14 UTC (permalink / raw)
To: Liam Girdwood, Mark Brown, linux-kernel, Ben Dooks, Kukjin Kim,
Russell King, linux-arm-kernel, linux-samsung-soc, devicetree
Cc: Kyungmin Park, Marek Szyprowski, Bartlomiej Zolnierkiewicz,
Javier Martinez Canillas, Chanwoo Choi, Krzysztof Kozlowski
Add suspend to RAM configuration for max77686 regulators. Some LDOs and
bucks are disabled. This reduces energy consumption during S2R,
approximately from 17 mA to 9 mA.
Additionally remove old and not supported bindings:
- regulator-mem-off
- regulator-mem-idle
- regulator-mem-on
The max77686 driver does not parse them and they are not documented
anywere.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++++++++--------------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index dd9ac66770f7..8067eb447829 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -225,7 +225,6 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
};
ldo2_reg: ldo2 {
@@ -234,7 +233,9 @@
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo3_reg: ldo3 {
@@ -243,7 +244,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo4_reg: ldo4 {
@@ -252,7 +252,6 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo5_reg: ldo5 {
@@ -261,7 +260,6 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo6_reg: ldo6 {
@@ -270,7 +268,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo7_reg: ldo7 {
@@ -279,7 +279,9 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo8_reg: ldo8 {
@@ -287,7 +289,9 @@
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: ldo9 {
@@ -295,7 +299,6 @@
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-idle;
};
ldo10_reg: ldo10 {
@@ -303,7 +306,9 @@
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: ldo11 {
@@ -312,7 +317,9 @@
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo12_reg: ldo12 {
@@ -320,7 +327,9 @@
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: ldo13 {
@@ -328,7 +337,6 @@
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo14_reg: ldo14 {
@@ -337,7 +345,9 @@
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: ldo15 {
@@ -345,7 +355,9 @@
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo16_reg: ldo16 {
@@ -353,7 +365,9 @@
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo17_reg: ldo17 {
@@ -361,7 +375,6 @@
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-idle;
};
ldo18_reg: ldo18 {
@@ -369,7 +382,6 @@
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo19_reg: ldo19 {
@@ -377,7 +389,6 @@
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo20_reg: ldo20 {
@@ -385,7 +396,6 @@
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo21_reg: ldo21 {
@@ -393,7 +403,6 @@
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-mem-idle;
};
ldo22_reg: ldo22 {
@@ -408,7 +417,6 @@
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-mem-idle;
};
ldo24_reg: ldo24 {
@@ -416,7 +424,6 @@
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo25_reg: ldo25 {
@@ -424,7 +431,6 @@
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-mem-idle;
};
ldo26_reg: ldo26 {
@@ -432,7 +438,6 @@
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- regulator-mem-idle;
};
buck1_reg: buck1 {
@@ -442,7 +447,9 @@
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: buck2 {
@@ -452,7 +459,9 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck3_reg: buck3 {
@@ -462,7 +471,9 @@
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: buck4 {
@@ -471,7 +482,9 @@
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: buck5 {
@@ -510,7 +523,6 @@
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-off;
};
};
};
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v6 2/3] regulator: max77802: Remove suspend_enable
2014-10-29 11:14 ` [PATCH v6 2/3] regulator: max77802: Remove suspend_enable Krzysztof Kozlowski
@ 2014-10-29 11:34 ` Javier Martinez Canillas
0 siblings, 0 replies; 6+ messages in thread
From: Javier Martinez Canillas @ 2014-10-29 11:34 UTC (permalink / raw)
To: Krzysztof Kozlowski, Liam Girdwood, Mark Brown, linux-kernel,
Ben Dooks, Kukjin Kim, Russell King, linux-arm-kernel,
linux-samsung-soc, devicetree
Cc: Kyungmin Park, Marek Szyprowski, Bartlomiej Zolnierkiewicz, Chanwoo Choi
Hello Krzysztof,
On 10/29/2014 12:14 PM, Krzysztof Kozlowski wrote:
> The Maxim 77802 PMIC regulators do not have special enable configuration
> for suspend. The driver instead enabled them manually which is not a
> best way to deal with suspend.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> drivers/regulator/max77802.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
> index 5839c4509e1f..b9958d927297 100644
> --- a/drivers/regulator/max77802.c
> +++ b/drivers/regulator/max77802.c
After what Mark explained, I understand this is the right thing to do.
Acked-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Best regards,
Javier
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs
2014-10-29 11:14 ` [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs Krzysztof Kozlowski
@ 2014-10-31 12:43 ` Mark Brown
0 siblings, 0 replies; 6+ messages in thread
From: Mark Brown @ 2014-10-31 12:43 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Liam Girdwood, linux-kernel, Ben Dooks, Kukjin Kim, Russell King,
linux-arm-kernel, linux-samsung-soc, devicetree, Kyungmin Park,
Marek Szyprowski, Bartlomiej Zolnierkiewicz,
Javier Martinez Canillas, Chanwoo Choi
[-- Attachment #1: Type: text/plain, Size: 298 bytes --]
On Wed, Oct 29, 2014 at 12:14:52PM +0100, Krzysztof Kozlowski wrote:
> Some LDOs of Maxim 77686 PMIC support disabling during system suspend
> (LDO{2,6,7,8,10,11,12,14,15,16}). This was already implemented as part
> of set_suspend_mode function. In that case the mode was one of:
Applied, thanks.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-10-31 12:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-29 11:14 [PATCH v6 0/3] regulator: max77686/trats2: Disable some regulators in suspend Krzysztof Kozlowski
2014-10-29 11:14 ` [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs Krzysztof Kozlowski
2014-10-31 12:43 ` Mark Brown
2014-10-29 11:14 ` [PATCH v6 2/3] regulator: max77802: Remove suspend_enable Krzysztof Kozlowski
2014-10-29 11:34 ` Javier Martinez Canillas
2014-10-29 11:14 ` [PATCH v6 3/3] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®