mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* [PATCH] mmc: host: arasan: sdhci-of-arasan: Remove no-hispd and no-cmd23 quirks for sdhci-arasan4.9a
@ 2015-12-23 13:29 Rameshswar Prasad Sahu
  2016-01-05 10:25 ` Rameshwar Sahu
  2016-01-27 14:15 ` Ulf Hansson
  0 siblings, 2 replies; 6+ messages in thread
From: Rameshswar Prasad Sahu @ 2015-12-23 13:29 UTC (permalink / raw)
  To: ulf.hansson, michal.simek, soren.brinkmann
  Cc: linux-mmc, arnd, linux-kernel, devicetree, linux-arm-kernel, jcm,
	patches, kgondkar, Rameshwar Prasad Sahu

From: Rameshwar Prasad Sahu <rsahu@apm.com>

The Arason SD host controller supports set block count command (cmd23)
and high speed mode. This patch re-enable both of these features that
was disabled. For device that doesn't support high speed, it should
configure its capability register accordingly instead disables it
explicitly.

Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
---
 drivers/mmc/host/sdhci-of-arasan.c |    5 -----
 1 files changed, 0 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 75379cb..5d9fdb3 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -172,11 +172,6 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 		goto clk_disable_all;
 	}

-	if (of_device_is_compatible(pdev->dev.of_node, "arasan,sdhci-4.9a")) {
-		host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
-		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
-	}
-
 	sdhci_get_of_property(pdev);
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = sdhci_arasan;
--
1.7.1


^ permalink raw reply	[flat|nested] 6+ messages in thread
* [PATCH] mmc: host: arasan: sdhci-of-arasan: Remove no-hispd and no-cmd23 quirks for sdhci-arasan4.9a
@ 2015-12-22 13:20 Rameshwar Prasad Sahu
  0 siblings, 0 replies; 6+ messages in thread
From: Rameshwar Prasad Sahu @ 2015-12-22 13:20 UTC (permalink / raw)
  To: ulf.hansson, michal.simek, soren.brinkmann
  Cc: linux-mmc, arnd, linux-kernel, devicetree, linux-arm-kernel, jcm,
	patches, kgondkar, Rameshwar Prasad Sahu

The Arason SD host controller supports set block count command (cmd23)
and high speed mode. This patch re-enable both of these features that
was disabled. For device that doesn't support high speed, it should
configure its capability register accordingly instead disables it
explicitly.

Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com>
---
 drivers/mmc/host/sdhci-of-arasan.c |    5 -----
 1 files changed, 0 insertions(+), 5 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 75379cb..5d9fdb3 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -172,11 +172,6 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 		goto clk_disable_all;
 	}

-	if (of_device_is_compatible(pdev->dev.of_node, "arasan,sdhci-4.9a")) {
-		host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
-		host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
-	}
-
 	sdhci_get_of_property(pdev);
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = sdhci_arasan;
--
1.7.1


^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2016-01-27 14:15 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-23 13:29 [PATCH] mmc: host: arasan: sdhci-of-arasan: Remove no-hispd and no-cmd23 quirks for sdhci-arasan4.9a Rameshswar Prasad Sahu
2016-01-05 10:25 ` Rameshwar Sahu
2016-01-07  1:33   ` Jaehoon Chung
2016-01-07 12:32     ` Rameshwar Sahu
2016-01-27 14:15 ` Ulf Hansson
  -- strict thread matches above, loose matches on Subject: below --
2015-12-22 13:20 Rameshwar Prasad Sahu

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome