From: Paolo Bonzini <pbonzini@redhat.com>
To: Emanuele Giuseppe Esposito <eesposit@redhat.com>, kvm@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>,
Maxim Levitsky <mlevitsk@redhat.com>,
Sean Christopherson <seanjc@google.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
David Hildenbrand <david@redhat.com>,
x86@kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] KVM: use signals to abort enter_guest/blocking and retry
Date: Sun, 23 Oct 2022 19:48:46 +0200 [thread overview]
Message-ID: <5ee4eeb8-4d61-06fc-f80d-06efeeffe902@redhat.com> (raw)
In-Reply-To: <20221022154819.1823133-5-eesposit@redhat.com>
On 10/22/22 17:48, Emanuele Giuseppe Esposito wrote:
> Once a vcpu exectues KVM_RUN, it could enter two states:
> enter guest mode, or block/halt.
> Use a signal to allow a vcpu to exit the guest state or unblock,
> so that it can exit KVM_RUN and release the read semaphore,
> allowing a pending KVM_KICK_ALL_RUNNING_VCPUS to continue.
>
> Note that the signal is not deleted and used to propagate the
> exit reason till vcpu_run(). It will be clearead only by
> KVM_RESUME_ALL_KICKED_VCPUS. This allows the vcpu to keep try
> entering KVM_RUN and perform again all checks done in
> kvm_arch_vcpu_ioctl_run() before entering the guest state,
> where it will return again if the request is still set.
>
> However, the userspace hypervisor should also try to avoid
> continuously calling KVM_RUN after invoking KVM_KICK_ALL_RUNNING_VCPUS,
> because such call will just translate in a back-to-back down_read()
> and up_read() (thanks to the signal).
Since the userspace should anyway avoid going into this effectively-busy
wait, what about clearing the request after the first exit? The
cancellation ioctl can be kept for vCPUs that are never entered after
KVM_KICK_ALL_RUNNING_VCPUS. Alternatively, kvm_clear_all_cpus_request
could be done right before up_write().
Paolo
> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
> ---
> arch/x86/include/asm/kvm_host.h | 2 ++
> arch/x86/kvm/x86.c | 8 ++++++++
> virt/kvm/kvm_main.c | 21 +++++++++++++++++++++
> 3 files changed, 31 insertions(+)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index aa381ab69a19..d5c37f344d65 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -108,6 +108,8 @@
> KVM_ARCH_REQ_FLAGS(30, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
> #define KVM_REQ_MMU_FREE_OBSOLETE_ROOTS \
> KVM_ARCH_REQ_FLAGS(31, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
> +#define KVM_REQ_USERSPACE_KICK \
> + KVM_ARCH_REQ_FLAGS(32, KVM_REQUEST_WAIT)
>
> #define CR0_RESERVED_BITS \
> (~(unsigned long)(X86_CR0_PE | X86_CR0_MP | X86_CR0_EM | X86_CR0_TS \
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index b0c47b41c264..2af5f427b4e9 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -10270,6 +10270,10 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
> }
>
> if (kvm_request_pending(vcpu)) {
> + if (kvm_test_request(KVM_REQ_USERSPACE_KICK, vcpu)) {
> + r = -EINTR;
> + goto out;
> + }
> if (kvm_check_request(KVM_REQ_VM_DEAD, vcpu)) {
> r = -EIO;
> goto out;
> @@ -10701,6 +10705,10 @@ static int vcpu_run(struct kvm_vcpu *vcpu)
> r = vcpu_block(vcpu);
> }
>
> + /* vcpu exited guest/unblocked because of this request */
> + if (kvm_test_request(KVM_REQ_USERSPACE_KICK, vcpu))
> + return -EINTR;
> +
> if (r <= 0)
> break;
>
> diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
> index ae0240928a4a..13fa7229b85d 100644
> --- a/virt/kvm/kvm_main.c
> +++ b/virt/kvm/kvm_main.c
> @@ -3431,6 +3431,8 @@ static int kvm_vcpu_check_block(struct kvm_vcpu *vcpu)
> goto out;
> if (kvm_check_request(KVM_REQ_UNBLOCK, vcpu))
> goto out;
> + if (kvm_test_request(KVM_REQ_USERSPACE_KICK, vcpu))
> + goto out;
>
> ret = 0;
> out:
> @@ -4668,6 +4670,25 @@ static long kvm_vm_ioctl(struct file *filp,
> r = kvm_vm_ioctl_enable_cap_generic(kvm, &cap);
> break;
> }
> + case KVM_KICK_ALL_RUNNING_VCPUS: {
> + /*
> + * Notify all running vcpus that they have to stop.
> + * Caught in kvm_arch_vcpu_ioctl_run()
> + */
> + kvm_make_all_cpus_request(kvm, KVM_REQ_USERSPACE_KICK);
> +
> + /*
> + * Use wr semaphore to wait for all vcpus to exit from KVM_RUN.
> + */
> + down_write(&memory_transaction);
> + up_write(&memory_transaction);
> + break;
> + }
> + case KVM_RESUME_ALL_KICKED_VCPUS: {
> + /* Remove all requests sent with KVM_KICK_ALL_RUNNING_VCPUS */
> + kvm_clear_all_cpus_request(kvm, KVM_REQ_USERSPACE_KICK);
> + break;
> + }
> case KVM_SET_USER_MEMORY_REGION: {
> struct kvm_userspace_memory_region kvm_userspace_mem;
>
next prev parent reply other threads:[~2022-10-23 17:49 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-22 15:48 [PATCH 0/4] KVM: API to block and resume all running vcpus in a vm Emanuele Giuseppe Esposito
2022-10-22 15:48 ` [PATCH 1/4] linux-headers/linux/kvm.h: introduce kvm_userspace_memory_region_list ioctl Emanuele Giuseppe Esposito
2022-10-22 15:48 ` [PATCH 2/4] KVM: introduce kvm_clear_all_cpus_request Emanuele Giuseppe Esposito
2022-10-22 15:48 ` [PATCH 3/4] KVM: introduce memory transaction semaphore Emanuele Giuseppe Esposito
2022-10-23 17:50 ` Paolo Bonzini
2022-10-24 12:57 ` Emanuele Giuseppe Esposito
2022-10-25 10:01 ` Paolo Bonzini
2022-10-22 15:48 ` [PATCH 4/4] KVM: use signals to abort enter_guest/blocking and retry Emanuele Giuseppe Esposito
2022-10-23 17:48 ` Paolo Bonzini [this message]
2022-10-24 7:43 ` Emanuele Giuseppe Esposito
2022-10-24 7:49 ` Emanuele Giuseppe Esposito
2022-10-25 10:05 ` Paolo Bonzini
2022-10-24 7:56 ` [PATCH 0/4] KVM: API to block and resume all running vcpus in a vm Christian Borntraeger
2022-10-24 8:33 ` Emanuele Giuseppe Esposito
2022-10-24 9:09 ` Christian Borntraeger
2022-10-24 22:45 ` Sean Christopherson
2022-10-25 9:33 ` Paolo Bonzini
2022-10-25 15:55 ` Sean Christopherson
2022-10-25 21:34 ` Paolo Bonzini
2022-10-25 23:07 ` Sean Christopherson
2022-10-26 17:52 ` Hyper-V VTLs, permission bitmaps and userspace exits (was Re: [PATCH 0/4] KVM: API to block and resume all running vcpus in a vm) Paolo Bonzini
2022-10-26 19:33 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5ee4eeb8-4d61-06fc-f80d-06efeeffe902@redhat.com \
--to=pbonzini@redhat.com \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=dave.hansen@linux.intel.com \
--cc=david@redhat.com \
--cc=eesposit@redhat.com \
--cc=hpa@zytor.com \
--cc=kvm@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=mlevitsk@redhat.com \
--cc=seanjc@google.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome