Re: [PATCH v2 4/4] spi: geni-qcom: Add target abort support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 2/4/26 5:28 PM, Praveen Talari wrote:
> SPI target mode currently lacks a mechanism to gracefully abort ongoing
> transfers when the client or core needs to cancel active transactions.
> 
> Implement spi_geni_target_abort() to handle aborting SPI target
> operations when the client and core want to cancel ongoing transfers.
> This provides a mechanism for graceful termination of active SPI
> transactions in target mode.
> 
> Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
> ---


> v1->v2
> - Removed unused param from time out handlers.
> ---
>  drivers/spi/spi-geni-qcom.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
> index 5077dc041e3a..43ce47f2454c 100644
> --- a/drivers/spi/spi-geni-qcom.c
> +++ b/drivers/spi/spi-geni-qcom.c
> @@ -1003,6 +1003,17 @@ static irqreturn_t geni_spi_isr(int irq, void *data)
>  	return IRQ_HANDLED;
>  }
>  
> +static int spi_geni_target_abort(struct spi_controller *spi)
> +{
> +	if (!spi->cur_msg)
> +		return 0;
> +
> +	handle_se_timeout(spi);
> +	spi_finalize_current_transfer(spi);
> +
> +	return 0;
> +}
> +
>  static int spi_geni_probe(struct platform_device *pdev)
>  {
>  	int ret, irq;
> @@ -1076,6 +1087,9 @@ static int spi_geni_probe(struct platform_device *pdev)
>  	init_completion(&mas->rx_reset_done);
>  	spin_lock_init(&mas->lock);
>  
> +	if (spi->target)
> +		spi->target_abort = spi_geni_target_abort;

The same check is made in core:

spi_target_abort()
-> spi_controller_is_target()

So I'm assuming the intention was to allow assigning the func pointer
indiscriminately. Other drivers seem to do it both ways.

Mark, any specific preference?

Konrad