mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
* Question about apds990x.ko
@ 2017-08-10 14:57 Anton Volkov
  2017-08-10 15:07 ` Greg KH
  0 siblings, 1 reply; 3+ messages in thread
From: Anton Volkov @ 2017-08-10 14:57 UTC (permalink / raw)
  To: arnd, gregkh; +Cc: linux-kernel, ldv-project, Alexey Khoroshilov

Hello.

While searching for races in the Linux kernel I've come across 
"drivers/misc/apds990x.ko" module. Here are questions that I came up 
with while analyzing results. Lines are given using the info from Linux 
v4.12.

Consider the following case:

Thread 1:                      Thread 2:
apds990x_suspend
apds990x_resume                apds990x_irq
-> apds990x_chip_on              if (!pm_runtime_suspended
                                                   (chip->client->dev)){
    -> apds990x_configure           if (status & APDS990X_ST_AINT) {
         chip->again_meas = 1         chip->again_meas = chip->again_next
         (apds990x.c: line 571)       (apds990x.c: line 505)
                                    }
                                   }

First question. Is this race feasible from your point of view?
Second question. The check for the device suspension status 
(pm_runtime_suspended()) is present in the interrupt handler, but the 
functions pm_runtime_set_suspended / pm_runtime_set_active are not used 
in apds990x_suspend / apds990x_resume respectively. Do you know about 
any other method being used to make the modification of suspension status?

Thank you for your time.

-- Anton Volkov
Linux Verification Center, ISPRAS
web: http://linuxtesting.org
e-mail: avolkov@ispras.ru

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2017-08-10 15:11 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-08-10 14:57 Question about apds990x.ko Anton Volkov
2017-08-10 15:07 ` Greg KH
2017-08-10 15:11   ` Anton Volkov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®