From: Hans Zhang <hans.zhang@cixtech.com>
To: Manivannan Sadhasivam <mani@kernel.org>
Cc: bhelgaas@google.com, lpieralisi@kernel.org, kw@linux.com,
robh@kernel.org, kwilczynski@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, mpillai@cadence.com,
fugang.duan@cixtech.com, guoyin.chen@cixtech.com,
peter.chen@cixtech.com, cix-kernel-upstream@cixtech.com,
linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 12/15] PCI: sky1: Add PCIe host support for CIX Sky1
Date: Mon, 1 Sep 2025 11:04:58 +0800 [thread overview]
Message-ID: <6e195d6e-2d3f-4550-bee1-05e085832034@cixtech.com> (raw)
In-Reply-To: <ssk2aolyodglbfvql66uk3snopnyneocoom2ymqhqc4lywugfo@2hmsuzgrutuw>
On 2025/8/30 21:29, Manivannan Sadhasivam wrote:
> [Some people who received this message don't often get email from mani@kernel.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> EXTERNAL EMAIL
>
> On Tue, Aug 19, 2025 at 07:52:36PM GMT, hans.zhang@cixtech.com wrote:
>> From: Hans Zhang <hans.zhang@cixtech.com>
>>
>> Add driver for the CIX Sky1 SoC PCIe Gen4 16 GT/s controller based
>> on the Cadence PCIe core.
>>
>> Supports MSI/MSI-x via GICv3, Single Virtual Channel, Single Function.
>>
>> Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
>> ---
>> Changes for v8:
>> - Optimization of CIX SKY1 Root Port driver. (Bjorn and Krzysztof)
>> - Use devm_platform_ioremap_resource_byname.
>> ---
>> drivers/pci/controller/cadence/Kconfig | 15 ++
>> drivers/pci/controller/cadence/Makefile | 1 +
>> drivers/pci/controller/cadence/pci-sky1.c | 232 ++++++++++++++++++++++
>> 3 files changed, 248 insertions(+)
>> create mode 100644 drivers/pci/controller/cadence/pci-sky1.c
>>
>> diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
>> index 117677a23d68..26a248cdc78a 100644
>> --- a/drivers/pci/controller/cadence/Kconfig
>> +++ b/drivers/pci/controller/cadence/Kconfig
>> @@ -42,6 +42,21 @@ config PCIE_CADENCE_PLAT_EP
>> endpoint mode. This PCIe controller may be embedded into many
>> different vendors SoCs.
>>
>> +config PCI_SKY1_HOST
>> + tristate "CIX SKY1 PCIe controller (host mode)"
>> + depends on OF
>> + select PCIE_CADENCE_HOST
>> + select PCI_ECAM
>> + help
>> + Say Y here if you want to support the CIX SKY1 PCIe platform
>> + controller in host mode. CIX SKY1 PCIe controller uses Cadence
>> + HPA (High Performance Architecture IP [Second generation of
>> + Cadence PCIe IP])
>> +
>> + This driver requires Cadence PCIe core infrastructure
>> + (PCIE_CADENCE_HOST) and hardware platform adaptation layer
>> + to function.
>> +
>> config PCI_J721E
>> tristate
>> select PCIE_CADENCE_HOST if PCI_J721E_HOST != n
>> diff --git a/drivers/pci/controller/cadence/Makefile b/drivers/pci/controller/cadence/Makefile
>> index de4ddae7aca4..40d7c6e98b4d 100644
>> --- a/drivers/pci/controller/cadence/Makefile
>> +++ b/drivers/pci/controller/cadence/Makefile
>> @@ -8,3 +8,4 @@ obj-$(CONFIG_PCIE_CADENCE_HOST) += pcie-cadence-host-mod.o
>> obj-$(CONFIG_PCIE_CADENCE_EP) += pcie-cadence-ep-mod.o
>> obj-$(CONFIG_PCIE_CADENCE_PLAT) += pcie-cadence-plat.o
>> obj-$(CONFIG_PCI_J721E) += pci-j721e.o
>> +obj-$(CONFIG_PCI_SKY1_HOST) += pci-sky1.o
>> diff --git a/drivers/pci/controller/cadence/pci-sky1.c b/drivers/pci/controller/cadence/pci-sky1.c
>> new file mode 100644
>> index 000000000000..7dd3546275c5
>> --- /dev/null
>> +++ b/drivers/pci/controller/cadence/pci-sky1.c
>> @@ -0,0 +1,232 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PCIe controller driver for CIX's sky1 SoCs
>> + *
>
> No copyright for CIX tech?
Dear Mani,
Thank you very much for your reply.
Will add.
>
>> + * Author: Hans Zhang <hans.zhang@cixtech.com>
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pci.h>
>> +#include <linux/pci-ecam.h>
>> +#include <linux/pci_ids.h>
>> +
>> +#include "pcie-cadence.h"
>> +#include "pcie-cadence-host-common.h"
>> +
>> +#define STRAP_REG(n) ((n) * 0x04)
>> +#define STATUS_REG(n) ((n) * 0x04)
>> +#define LINK_TRAINING_ENABLE BIT(0)
>> +#define LINK_COMPLETE BIT(0)
>
> Extra space.
Will change.
>
>> +
>> +#define SKY1_IP_REG_BANK 0x1000
>> +#define SKY1_IP_CFG_CTRL_REG_BANK 0x4c00
>> +#define SKY1_IP_AXI_MASTER_COMMON 0xf000
>> +#define SKY1_AXI_SLAVE 0x9000
>> +#define SKY1_AXI_MASTER 0xb000
>> +#define SKY1_AXI_HLS_REGISTERS 0xc000
>> +#define SKY1_AXI_RAS_REGISTERS 0xe000
>> +#define SKY1_DTI_REGISTERS 0xd000
>> +
>> +#define IP_REG_I_DBG_STS_0 0x420
>> +
>> +struct sky1_pcie {
>> + struct cdns_pcie *cdns_pcie;
>> + struct cdns_pcie_rc *cdns_pcie_rc;
>> +
>> + struct resource *cfg_res;
>> + struct resource *msg_res;
>> + struct pci_config_window *cfg;
>> + void __iomem *strap_base;
>> + void __iomem *status_base;
>> + void __iomem *reg_base;
>> + void __iomem *cfg_base;
>> + void __iomem *msg_base;
>> +};
>> +
>> +static int sky1_pcie_resource_get(struct platform_device *pdev,
>> + struct sky1_pcie *pcie)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + void __iomem *base;
>> +
>> + base = devm_platform_ioremap_resource_byname(pdev, "reg");
>> + if (IS_ERR(base))
>> + return dev_err_probe(dev, PTR_ERR(base),
>> + "unable to find reg registers\n");
>
> "unable to find \"reg\" registers". Same for below prints.
Will change.
>
>> + pcie->reg_base = base;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
>> + if (!res)
>> + return dev_err_probe(dev, ENXIO, "unable to get cfg resource\n");
>> + pcie->cfg_res = res;
>> +
>> + base = devm_platform_ioremap_resource_byname(pdev, "rcsu_strap");
>> + if (IS_ERR(base))
>> + return dev_err_probe(dev, PTR_ERR(base),
>> + "unable to find rcsu strap registers\n");
>> + pcie->strap_base = base;
>> +
>> + base = devm_platform_ioremap_resource_byname(pdev, "rcsu_status");
>> + if (IS_ERR(base))
>> + return dev_err_probe(dev, PTR_ERR(base),
>> + "unable to find rcsu status registers\n");
>> + pcie->status_base = base;
>> +
>> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "msg");
>> + if (!res)
>> + return dev_err_probe(dev, ENXIO, "unable to get msg resource\n");
>> + pcie->msg_res = res;
>> + pcie->msg_base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(pcie->msg_base)) {
>> + return dev_err_probe(dev, PTR_ERR(pcie->msg_base),
>> + "unable to ioremap msg resource\n");
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int sky1_pcie_start_link(struct cdns_pcie *cdns_pcie)
>> +{
>> + struct sky1_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
>> + u32 val;
>> +
>> + val = readl(pcie->strap_base + STRAP_REG(1));
>> + val |= LINK_TRAINING_ENABLE;
>> + writel(val, pcie->strap_base + STRAP_REG(1));
>> +
>> + return 0;
>> +}
>> +
>> +static void sky1_pcie_stop_link(struct cdns_pcie *cdns_pcie)
>> +{
>> + struct sky1_pcie *pcie = dev_get_drvdata(cdns_pcie->dev);
>> + u32 val;
>> +
>> + val = readl(pcie->strap_base + STRAP_REG(1));
>> + val &= ~LINK_TRAINING_ENABLE;
>> + writel(val, pcie->strap_base + STRAP_REG(1));
>> +}
>> +
>> +static bool sky1_pcie_link_up(struct cdns_pcie *cdns_pcie)
>> +{
>> + u32 val;
>> +
>> + val = cdns_pcie_hpa_readl(cdns_pcie, REG_BANK_IP_REG,
>> + IP_REG_I_DBG_STS_0);
>> + return val & LINK_COMPLETE;
>> +}
>> +
>> +static const struct cdns_pcie_ops sky1_pcie_ops = {
>> + .start_link = sky1_pcie_start_link,
>> + .stop_link = sky1_pcie_stop_link,
>> + .link_up = sky1_pcie_link_up,
>> +};
>> +
>> +static int sky1_pcie_probe(struct platform_device *pdev)
>> +{
>> + struct cdns_plat_pcie_of_data *reg_off;
>> + struct device *dev = &pdev->dev;
>> + struct pci_host_bridge *bridge;
>> + struct cdns_pcie *cdns_pcie;
>> + struct resource_entry *bus;
>> + struct cdns_pcie_rc *rc;
>> + struct sky1_pcie *pcie;
>> + int ret;
>> +
>> + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>> + if (!pcie)
>> + return -ENOMEM;
>> +
>> + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
>> + if (!bridge)
>> + return -ENOMEM;
>> +
>> + ret = sky1_pcie_resource_get(pdev, pcie);
>> + if (ret < 0)
>> + return -ENXIO;
>
> return ret;
Will change.
Best regards,
Hans
>
> - Mani
>
> --
> மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2025-09-01 3:05 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-19 11:52 [PATCH v8 00/15] Enhance the PCIe controller driver for next generation controllers hans.zhang
2025-08-19 11:52 ` [PATCH v8 01/15] PCI: cadence: Add module support for platform controller driver hans.zhang
2025-08-19 11:52 ` [PATCH v8 02/15] PCI: cadence: Split PCIe controller header file hans.zhang
2025-08-19 11:52 ` [PATCH v8 03/15] PCI: cadence: Add register definitions for High Perf Architecture (HPA) hans.zhang
2025-08-19 17:36 ` ALOK TIWARI
2025-08-20 8:14 ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 04/15] PCI: cadence: Add helper functions for supporting " hans.zhang
2025-08-19 11:52 ` [PATCH v8 05/15] PCI: cadence: Move PCIe EP common functions to a separate file hans.zhang
2025-08-19 17:46 ` ALOK TIWARI
2025-08-19 11:52 ` [PATCH v8 06/15] PCI: cadence: Move PCIe RP " hans.zhang
2025-08-30 10:36 ` Manivannan Sadhasivam
2025-09-01 4:30 ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 07/15] PCI: cadence: Move PCIe controller common functions as " hans.zhang
2025-08-30 11:21 ` Manivannan Sadhasivam
2025-09-01 4:30 ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 08/15] PCI: cadence: Add support for High Perf Architecture (HPA) controller hans.zhang
2025-08-26 12:08 ` kernel test robot
2025-08-30 13:18 ` Manivannan Sadhasivam
2025-09-01 4:34 ` Manikandan Karunakaran Pillai
2025-08-19 11:52 ` [PATCH v8 09/15] PCI: cadence: Update PCIe platform to use register offsets passed hans.zhang
2025-08-19 11:52 ` [PATCH v8 10/15] dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings hans.zhang
2025-08-20 7:23 ` Krzysztof Kozlowski
2025-08-19 11:52 ` [PATCH v8 11/15] PCI: Add Cix Technology Vendor and Device ID hans.zhang
2025-08-30 13:20 ` Manivannan Sadhasivam
2025-08-30 13:21 ` Manivannan Sadhasivam
2025-09-01 3:03 ` Hans Zhang
2025-08-19 11:52 ` [PATCH v8 12/15] PCI: sky1: Add PCIe host support for CIX Sky1 hans.zhang
2025-08-30 13:29 ` Manivannan Sadhasivam
2025-09-01 3:04 ` Hans Zhang [this message]
2025-08-19 11:52 ` [PATCH v8 13/15] MAINTAINERS: add entry for CIX Sky1 PCIe driver hans.zhang
2025-08-19 11:52 ` [PATCH v8 14/15] arm64: dts: cix: Add PCIe Root Complex on sky1 hans.zhang
2025-08-30 13:31 ` Manivannan Sadhasivam
2025-09-01 3:09 ` Hans Zhang
2025-08-19 11:52 ` [PATCH v8 15/15] arm64: dts: cix: Enable PCIe on the Orion O6 board hans.zhang
2025-08-30 13:33 ` Manivannan Sadhasivam
2025-09-01 3:14 ` Hans Zhang
2025-09-01 3:17 ` Hans Zhang
2025-08-30 13:38 ` [PATCH v8 00/15] Enhance the PCIe controller driver for next generation controllers Manivannan Sadhasivam
2025-09-01 4:28 ` Manikandan Karunakaran Pillai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6e195d6e-2d3f-4550-bee1-05e085832034@cixtech.com \
--to=hans.zhang@cixtech.com \
--cc=bhelgaas@google.com \
--cc=cix-kernel-upstream@cixtech.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fugang.duan@cixtech.com \
--cc=guoyin.chen@cixtech.com \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=mpillai@cadence.com \
--cc=peter.chen@cixtech.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®