From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v4 04/11] arm64: dts: freescale: imx8mm-var-som: Add support for WM8904 audio codec
Date: Thu, 19 Mar 2026 19:40:24 +0100 [thread overview]
Message-ID: <71a37de0ca214ac4ed1200479dadc25eb7820ffd.1773944896.git.stefano.r@variscite.com> (raw)
In-Reply-To: <cover.1773944896.git.stefano.r@variscite.com>
From: Stefano Radaelli <stefano.r@variscite.com>
The VAR-SOM-MX8MM can integrate the WM8904, a high-performance
ultra-low-power stereo codec optimized for portable audio applications.
Add the WM8904 device to the appropriate I2C bus, enable the SAI
peripheral, and introduce the sound node to expose the sound card to the
system.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
- Remove "This patch" from commit messages
v2->v3:
-
v1->v2:
-
.../boot/dts/freescale/imx8mm-var-som.dtsi | 100 +++++++++++++++++-
1 file changed, 97 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index 24924ee1e8c7..7cedef8add32 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -14,6 +14,14 @@ memory@40000000 {
reg = <0x0 0x40000000 0 0x80000000>;
};
+ reg_audio_supply: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "wm8904-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
reg_eth_phy: regulator-eth-phy {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -31,6 +39,34 @@ reg_phy_vddio: regulator-phy-vddio {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,bitclock-master = <&codec_dai>;
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&codec_dai>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "wm8904-audio";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPOUTL",
+ "Headphone Jack", "HPOUTR",
+ "IN2L", "Line In Jack",
+ "IN2R", "Line In Jack",
+ "IN1L", "Microphone Jack",
+ "IN1R", "Microphone Jack";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+
+ codec_dai: simple-audio-card,codec {
+ sound-dai = <&wm8904>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai5>;
+ };
+ };
};
&A53_0 {
@@ -257,18 +293,57 @@ ldo6_reg: LDO6 {
&i2c3 {
clock-frequency = <400000>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
- /* TODO: configure audio, as of now just put a placeholder */
wm8904: codec@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
- status = "disabled";
+ #sound-dai-cells = <0>;
+ clocks = <&clk IMX8MM_CLK_SAI5_ROOT>;
+ clock-names = "mclk";
+ AVDD-supply = <&ldo5_reg>;
+ CPVDD-supply = <&ldo5_reg>;
+ DBVDD-supply = <®_audio_supply>;
+ DCVDD-supply = <&ldo5_reg>;
+ MICVDD-supply = <&ldo5_reg>;
+ wlf,drc-cfg-names = "default", "peaklimiter", "tradition",
+ "soft", "music";
+ /*
+ * Config registers per name, respectively:
+ * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1
+ * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1
+ * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1
+ * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1
+ * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1
+ */
+ wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>,
+ /bits/ 16 <0x04af 0x324b 0x0010 0x0408>,
+ /bits/ 16 <0x04af 0x324b 0x0028 0x0704>,
+ /bits/ 16 <0x04af 0x324b 0x0018 0x078c>,
+ /bits/ 16 <0x04af 0x324b 0x0010 0x050e>;
+ /* GPIO1 = DMIC_CLK, don't touch others */
+ wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>;
};
};
+&sai5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai5>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <1536000>;
+ #sound-dai-cells = <0>;
+ dmas = <&sdma2 8 25 0>, <&sdma2 9 25 0>;
+ dma-names = "rx", "tx";
+ fsl,sai-mclk-direction-output;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -413,6 +488,13 @@ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3
>;
};
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1c3
+ MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1c3
+ >;
+ };
+
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
@@ -431,6 +513,18 @@ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x1c0
>;
};
+ pinctrl_sai5: sai5grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6
+ MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140
--
2.47.3
next prev parent reply other threads:[~2026-03-19 18:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-19 18:40 [PATCH v4 00/11] arm64: dts: freescale: imx8mm-var-som: Align SOM and Symphony DTSs Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 01/11] arm64: dts: freescale: imx8mm-var-som: Move UART4 description to Symphony Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 02/11] arm64: dts: freescale: imx8mm-var-som: Align fsl,pins tables Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 03/11] arm64: dts: freescale: imx8mm-var-som: Update FEC support with MaxLinear PHY Stefano Radaelli
2026-03-19 18:40 ` Stefano Radaelli [this message]
2026-03-19 18:40 ` [PATCH v4 05/11] arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 06/11] arm64: dts: freescale: imx8mm-var-som: Rework WiFi/BT and add legacy dts Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 07/11] arm64: dts: imx8mm-var-som-symphony: Move USB configuration from SOM Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 08/11] arm64: dts: imx8mm-var-som-symphony: Enable uSD on USDHC2 Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 09/11] arm64: dts: imx8mm-var-som-symphony: Add TPM2 support Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 10/11] arm64: dts: imx8mm-var-som-symphony: Enable I2C4 Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 11/11] arm64: dts: imx8mm-var-som-symphony: Enable PCIe Stefano Radaelli
2026-03-24 15:31 ` [PATCH v4 00/11] arm64: dts: freescale: imx8mm-var-som: Align SOM and Symphony DTSs Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71a37de0ca214ac4ed1200479dadc25eb7820ffd.1773944896.git.stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®