From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v4 01/11] arm64: dts: freescale: imx8mm-var-som: Move UART4 description to Symphony
Date: Thu, 19 Mar 2026 19:40:21 +0100 [thread overview]
Message-ID: <d3fbc6a0d5782e86a2294f28786b415a7b072d19.1773944896.git.stefano.r@variscite.com> (raw)
In-Reply-To: <cover.1773944896.git.stefano.r@variscite.com>
From: Stefano Radaelli <stefano.r@variscite.com>
The VAR-SOM-MX8MM module does not provide an onboard debug console.
UART4 is routed and exposed only on the Symphony carrier board, while
custom carrier designs may choose to expose a different UART.
Move the UART4 node from the SOM device tree to the
imx8mm-var-som-symphony.dts, keeping the SOM dtsi limited to hardware
present on the module itself.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v3->v4:
-
v2->v3:
-
v1->v2:
-
.../dts/freescale/imx8mm-var-som-symphony.dts | 18 ++++++++++++++++++
.../boot/dts/freescale/imx8mm-var-som.dtsi | 18 ------------------
2 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
index affbc67c2ef6..819707e6f3bf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dts
@@ -11,6 +11,10 @@ / {
model = "Variscite VAR-SOM-MX8MM Symphony evaluation board";
compatible = "variscite,var-som-mx8mm-symphony", "variscite,var-som-mx8mm", "fsl,imx8mm";
+ chosen {
+ stdout-path = &uart4;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -156,6 +160,13 @@ &uart3 {
status = "okay";
};
+/* Console */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
&usbotg1 {
disable-over-current;
extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
@@ -251,4 +262,11 @@ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
>;
};
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ >;
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index 190bde4edcd7..b6560c03639e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -9,10 +9,6 @@
/ {
model = "Variscite VAR-SOM-MX8MM module";
- chosen {
- stdout-path = &uart4;
- };
-
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
@@ -274,13 +270,6 @@ &uart2 {
status = "okay";
};
-/* Console */
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
-};
-
&usbotg1 {
dr_mode = "otg";
usb-role-switch;
@@ -418,13 +407,6 @@ MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140
>;
};
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
- MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
- >;
- };
-
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
--
2.47.3
next prev parent reply other threads:[~2026-03-19 18:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-19 18:40 [PATCH v4 00/11] arm64: dts: freescale: imx8mm-var-som: Align SOM and Symphony DTSs Stefano Radaelli
2026-03-19 18:40 ` Stefano Radaelli [this message]
2026-03-19 18:40 ` [PATCH v4 02/11] arm64: dts: freescale: imx8mm-var-som: Align fsl,pins tables Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 03/11] arm64: dts: freescale: imx8mm-var-som: Update FEC support with MaxLinear PHY Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 04/11] arm64: dts: freescale: imx8mm-var-som: Add support for WM8904 audio codec Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 05/11] arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 06/11] arm64: dts: freescale: imx8mm-var-som: Rework WiFi/BT and add legacy dts Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 07/11] arm64: dts: imx8mm-var-som-symphony: Move USB configuration from SOM Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 08/11] arm64: dts: imx8mm-var-som-symphony: Enable uSD on USDHC2 Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 09/11] arm64: dts: imx8mm-var-som-symphony: Add TPM2 support Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 10/11] arm64: dts: imx8mm-var-som-symphony: Enable I2C4 Stefano Radaelli
2026-03-19 18:40 ` [PATCH v4 11/11] arm64: dts: imx8mm-var-som-symphony: Enable PCIe Stefano Radaelli
2026-03-24 15:31 ` [PATCH v4 00/11] arm64: dts: freescale: imx8mm-var-som: Align SOM and Symphony DTSs Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3fbc6a0d5782e86a2294f28786b415a7b072d19.1773944896.git.stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®