From: Michal Simek <michal.simek@amd.com>
To: <linux-kernel@vger.kernel.org>, <monstr@monstr.eu>,
<michal.simek@xilinx.com>, <git@xilinx.com>
Cc: Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Rob Herring <robh@kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ZYNQ ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 02/15] ARM: zynq: Remove deprecated device_type property
Date: Wed, 11 Dec 2024 13:41:21 +0100 [thread overview]
Message-ID: <77152dc14271a2340f63e6d407f36293ed656d49.1733920873.git.michal.simek@amd.com> (raw)
In-Reply-To: <cover.1733920873.git.michal.simek@amd.com>
Based on DT specification device_type property is deprecated and should be
used only for cpu and memory nodes. That's why remove other usage. In this
case ethernet phy.
Signed-off-by: Michal Simek <michal.simek@amd.com>
---
arch/arm/boot/dts/xilinx/zynq-cc108.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-parallella.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-zc702.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-zc706.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-zed.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts | 1 -
arch/arm/boot/dts/xilinx/zynq-zybo.dts | 1 -
9 files changed, 9 deletions(-)
diff --git a/arch/arm/boot/dts/xilinx/zynq-cc108.dts b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
index 8b9ab9bba23b..b930a5953b49 100644
--- a/arch/arm/boot/dts/xilinx/zynq-cc108.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-cc108.dts
@@ -48,7 +48,6 @@ &gem0 {
ethernet_phy: ethernet-phy@1 {
reg = <1>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-parallella.dts b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
index 54592aeb92b9..366af4fcf8d9 100644
--- a/arch/arm/boot/dts/xilinx/zynq-parallella.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-parallella.dts
@@ -46,7 +46,6 @@ ethernet_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id0141.0e90",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
- device_type = "ethernet-phy";
marvell,reg-init = <0x3 0x10 0xff00 0x1e>,
<0x3 0x11 0xfff0 0xa>;
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc702.dts b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
index a933c0341b69..b77d2ae82606 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc702.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc702.dts
@@ -95,7 +95,6 @@ &gem0 {
ethernet_phy: ethernet-phy@7 {
reg = <7>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc706.dts b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
index d21e3ae4ebb2..50636906981e 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc706.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc706.dts
@@ -46,7 +46,6 @@ &gem0 {
ethernet_phy: ethernet-phy@7 {
reg = <7>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
index 0dd352289a45..9bb5b3a5252f 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm010.dts
@@ -45,7 +45,6 @@ &gem0 {
ethernet_phy: ethernet-phy@7 {
reg = <7>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
index 38d96adc870c..3fd0d05588bb 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zc770-xm013.dts
@@ -40,7 +40,6 @@ &gem1 {
ethernet_phy: ethernet-phy@7 {
reg = <7>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zed.dts b/arch/arm/boot/dts/xilinx/zynq-zed.dts
index 6a5a93aa6552..63effb7809c5 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zed.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zed.dts
@@ -43,7 +43,6 @@ &gem0 {
ethernet_phy: ethernet-phy@0 {
reg = <0>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
index 7b87e10d3953..da76cfd65832 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo-z7.dts
@@ -49,7 +49,6 @@ &gem0 {
ethernet_phy: ethernet-phy@0 {
reg = <0>;
- device_type = "ethernet-phy";
};
};
diff --git a/arch/arm/boot/dts/xilinx/zynq-zybo.dts b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
index 755f6f109d5a..4784ef115dad 100644
--- a/arch/arm/boot/dts/xilinx/zynq-zybo.dts
+++ b/arch/arm/boot/dts/xilinx/zynq-zybo.dts
@@ -44,7 +44,6 @@ &gem0 {
ethernet_phy: ethernet-phy@0 {
reg = <0>;
- device_type = "ethernet-phy";
};
};
--
2.43.0
next prev parent reply other threads:[~2024-12-11 12:41 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-11 12:41 [PATCH 00/15] ARM: zynq: Sync DTs with U-Boot Michal Simek
2024-12-11 12:41 ` [PATCH 01/15] ARM: zynq: Replace 'io-standard' with 'power-source' property Michal Simek
2024-12-11 12:41 ` Michal Simek [this message]
2024-12-11 12:41 ` [PATCH 03/15] ARM: zynq: DT: List OCM memory for all platforms Michal Simek
2024-12-11 12:41 ` [PATCH 04/15] ARM: zynq: Mark boot-phase-specific device nodes Michal Simek
2024-12-11 12:41 ` [PATCH 05/15] ARM: zynq: Do not define address/size-cells for nand-controller Michal Simek
2024-12-11 12:41 ` [PATCH 06/15] ARM: zynq: Wire smcc with nand/nor memories on zc770 platform Michal Simek
2024-12-11 12:41 ` [PATCH 07/15] ARM: zynq: Add ethernet phy reset information to DT(zc702) Michal Simek
2024-12-11 13:45 ` Andrew Lunn
2024-12-11 14:04 ` Michal Simek
2024-12-11 14:21 ` Andrew Lunn
2024-12-11 14:37 ` Michal Simek
2024-12-11 12:41 ` [PATCH 08/15] ARM: zynq: Define u-boot bootscrip addr via DT Michal Simek
2024-12-11 12:41 ` [PATCH 09/15] ARM: zynq: Point via nvmem0 alias to eeprom on zc702/zc706 Michal Simek
2024-12-11 12:41 ` [PATCH 10/15] ARM: zynq: Define rtc alias " Michal Simek
2024-12-11 12:41 ` [PATCH 11/15] ARM: zynq: Rename i2c?-gpio to i2c?-gpio-grp Michal Simek
2024-12-11 12:41 ` [PATCH 12/15] ARM: zynq: Fix fpga region DT nodes name Michal Simek
2024-12-11 12:41 ` [PATCH 13/15] ARM: zynq: Enable QSPIs on platforms Michal Simek
2024-12-11 12:41 ` [PATCH 14/15] ARM: zynq: Add sdhci to alias node Michal Simek
2024-12-11 12:41 ` [PATCH 15/15] ARM: zynq: Remove ethernet0 alias from Microzed Michal Simek
2024-12-11 15:54 ` [PATCH 00/15] ARM: zynq: Sync DTs with U-Boot Rob Herring (Arm)
2024-12-12 7:12 ` Michal Simek
2025-01-06 14:52 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=77152dc14271a2340f63e6d407f36293ed656d49.1733920873.git.michal.simek@amd.com \
--to=michal.simek@amd.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=git@xilinx.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=monstr@monstr.eu \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®