Re: iwlwifi: Regression after migrating to 6.6.32

[Johannes Berg <johannes@sipsolutions.net>]

On Tue, 2024-06-11 at 11:32 -0300, Fabio Estevam wrote:
> Hi Johannes,
> 
> I forgot to mention, but the Wifi device I am using is:
> 
> Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340
> 
> On Tue, Jun 11, 2024 at 10:54 AM Johannes Berg
> <johannes@sipsolutions.net> wrote:
> 
> > > [    5.038174] rxb->offset is 0 trans_pcie->rx_buf_bytes is 4096
> > 
> > so that looks pretty normal?
> > 
> > Might be useful to see rx->page_dma too, supported_dma_mask should be
> > 4095 or 2047 depending on the device, but I'm not sure how you could end
> > up with a DMA mapping for a page that's not at least 11 bit aligned?
> 
> Here it goes:
> 
> [    4.344218] rxb->offset is 0 trans_pcie->rx_buf_bytes is 4096
> rxb->page_dma is 4215433216 trans_pcie->supported_dma_mask is 4095

> I don't know what a typical rxb->page_dma should be.
> 

It should be an address (so that's fine), but I don't see how it ends up
not being page-aligned if we request to map a page and 4096 bytes??

Is that platform "weird" with strange page size, or something?

johannes