* Problem with sata driver
@ 2006-03-11 15:08 Sion Khalaf
0 siblings, 0 replies; 2+ messages in thread
From: Sion Khalaf @ 2006-03-11 15:08 UTC (permalink / raw)
To: Linux-Kernel@Vger. Kernel. Org
Hi,
I am having problem with Sata Drive /dev/sda
Board from SuperMicro With Nvidia ChipSet - H8DCE
The board has 8 x SATA ports, but only one SATA Drive is connected
(Maxtor 500 GB )
Kernel 2.6.15
I insert the module : insmod sata_nv.ko
Then, udevstart
Fdisk Output:
-------------------------------------------------------------------
[root@880-TEST root]$ fdisk -l
Disk /dev/hda: 262 MB, 262144000 bytes
16 heads, 32 sectors/track, 1000 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 998 255487+ 83 Linux
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
[root@880-TEST root]$
------------------------------------------------------------------------
----
When trying to repartition the disk, I got into hangs.
(Trying to save changes - w )
Attached is the dmesg, since inserting the module.
What is wrong ?
Thank you in advanced,
Sion
************************************************************************
**********
sata_nv 0000:00:07.0: version 0.8
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 11 (level,
low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 11
ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_nv
ata2: no device found (phy stat 00000000)
scsi1 : sata_nv
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 9
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 9 (level, low)
-> IRQ 9
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 9
ata4: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 9
ata3: no device found (phy stat 00000000)
scsi2 : sata_nv
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4773 85:7c69 86:3e01 87:4763
88:407f
ata4: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata4: dev 0 configured for UDMA/133
scsi3 : sata_nv
Vendor: ATA Model: Maxtor 7H500F0 Rev: HA43
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
sda:<4>nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
sd 3:0:0:0: Attached scsi disk sda
sd 3:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LNKB] -> GSI 9 (level, low)
-> IRQ 9
PCI: Setting latency timer of device 0000:80:07.0 to 64
ata5: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq 9
ata6: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq 9
ata5: no device found (phy stat 00000000)
scsi4 : sata_nv
ata6: no device found (phy stat 00000000)
scsi5 : sata_nv
ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LNKA] -> GSI 9 (level, low)
-> IRQ 9
PCI: Setting latency timer of device 0000:80:08.0 to 64
ata7: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 9
ata8: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 9
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
nv_sata: Primary device added
nv_sata: Primary device removed
nv_sata: Secondary device added
nv_sata: Secondary device removed
ata7: no device found (phy stat 00000000)
scsi6 : sata_nv
ata8: no device found (phy stat 00000000)
scsi7 : sata_nv
ata4: command 0x35 timeout, stat 0xd0 host_stat 0x21
ata4: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata4: status=0xd0 { Busy }
sd 3:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x47 ASCQ=0x0
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
lost page write due to I/O error on sda
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
SCSI device sda: drive cache: write back
sda:<4>ATA: abnormal status 0xD0 on port 0xAC07
ATA: abnormal status 0xD0 on port 0xAC07
ATA: abnormal status 0xD0 on port 0xAC07
[root@880-TEST root]$
************************************************************************
*********
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: Problem with sata driver
@ 2006-03-11 22:03 Sion Khalaf
0 siblings, 0 replies; 2+ messages in thread
From: Sion Khalaf @ 2006-03-11 22:03 UTC (permalink / raw)
To: Ed Tomlinson, linux-kernel
Amd 64, with Slackware 9.1
Any ideas ?
10x
-----Original Message-----
From: Ed Tomlinson [mailto:edt@aei.ca]
Sent: Saturday, March 11, 2006 5:25 PM
To: Sion Khalaf
Subject: Re: Problem with sata driver
Debian? amd64?
I got the same same errors with debain install disks.... gentoo had no
problems.
Ed Tomlinson
On Saturday 11 March 2006 10:08, you wrote:
> Hi,
>
> I am having problem with Sata Drive /dev/sda
>
> Board from SuperMicro With Nvidia ChipSet - H8DCE The board has 8 x
> SATA ports, but only one SATA Drive is connected (Maxtor 500 GB )
>
> Kernel 2.6.15
> I insert the module : insmod sata_nv.ko Then, udevstart
>
> Fdisk Output:
> -------------------------------------------------------------------
> [root@880-TEST root]$ fdisk -l
>
> Disk /dev/hda: 262 MB, 262144000 bytes
> 16 heads, 32 sectors/track, 1000 cylinders Units = cylinders of 512 *
> 512 = 262144 bytes
>
> Device Boot Start End Blocks Id System
> /dev/hda1 * 1 998 255487+ 83 Linux
>
> Disk /dev/sda: 500.1 GB, 500107862016 bytes
> 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of
> 16065 * 512 = 8225280 bytes
>
> Device Boot Start End Blocks Id System
> [root@880-TEST root]$
>
> ----------------------------------------------------------------------
> --
> ----
> When trying to repartition the disk, I got into hangs.
> (Trying to save changes - w )
>
> Attached is the dmesg, since inserting the module.
>
> What is wrong ?
>
> Thank you in advanced,
> Sion
>
> **********************************************************************
> **
> **********
>
> sata_nv 0000:00:07.0: version 0.8
> ACPI: PCI Interrupt Link [LTID] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 11
> ata2: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 11
> ata1: no device found (phy stat 00000000) scsi0 : sata_nv
> ata2: no device found (phy stat 00000000)
> scsi1 : sata_nv
> ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 9
> ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 9 (level,
> low)
> -> IRQ 9
> PCI: Setting latency timer of device 0000:00:08.0 to 64
> ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 9
> ata4: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 9
> ata3: no device found (phy stat 00000000)
> scsi2 : sata_nv
> nv_sata: Primary device added
> nv_sata: Primary device removed
> nv_sata: Secondary device added
> nv_sata: Secondary device removed
> ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4773 85:7c69 86:3e01
> 87:4763 88:407f
> ata4: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
> nv_sata: Primary device added
> nv_sata: Primary device removed
> nv_sata: Secondary device added
> nv_sata: Secondary device removed
> ata4: dev 0 configured for UDMA/133
> scsi3 : sata_nv
> Vendor: ATA Model: Maxtor 7H500F0 Rev: HA43
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI
> device sda: drive cache: write back SCSI device sda: 976773168
> 512-byte hdwr sectors (500108 MB) SCSI device sda: drive cache: write
> back
> sda:<4>nv_sata: Primary device added
> nv_sata: Primary device removed
> nv_sata: Secondary device added
> nv_sata: Secondary device removed
>
> sd 3:0:0:0: Attached scsi disk sda
> sd 3:0:0:0: Attached scsi generic sg0 type 0
> ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LNKB] -> GSI 9 (level,
> low)
> -> IRQ 9
> PCI: Setting latency timer of device 0000:80:07.0 to 64
> ata5: SATA max UDMA/133 cmd 0xF800 ctl 0xF402 bmdma 0xE800 irq 9
> ata6: SATA max UDMA/133 cmd 0xF000 ctl 0xEC02 bmdma 0xE808 irq 9
> ata5: no device found (phy stat 00000000)
> scsi4 : sata_nv
> ata6: no device found (phy stat 00000000)
> scsi5 : sata_nv
> ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LNKA] -> GSI 9 (level,
> low)
> -> IRQ 9
> PCI: Setting latency timer of device 0000:80:08.0 to 64
> ata7: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 9
> ata8: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 9
> nv_sata: Primary device added
> nv_sata: Primary device removed
> nv_sata: Secondary device added
> nv_sata: Secondary device removed
> nv_sata: Primary device added
> nv_sata: Primary device removed
> nv_sata: Secondary device added
> nv_sata: Secondary device removed
> nv_sata: Primary device added
> nv_sata: Primary device removed
> nv_sata: Secondary device added
> nv_sata: Secondary device removed
> ata7: no device found (phy stat 00000000)
> scsi6 : sata_nv
> ata8: no device found (phy stat 00000000)
> scsi7 : sata_nv
> ata4: command 0x35 timeout, stat 0xd0 host_stat 0x21
> ata4: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00
> ata4: status=0xd0 { Busy }
> sd 3:0:0:0: SCSI error: return code = 0x8000002
> sda: Current: sense key=0xb
> ASC=0x47 ASCQ=0x0
> end_request: I/O error, dev sda, sector 0 Buffer I/O error on device
> sda, logical block 0 lost page write due to I/O error on sda SCSI
> device sda: 976773168 512-byte hdwr sectors (500108 MB) SCSI device
> sda: drive cache: write back
> sda:<4>ATA: abnormal status 0xD0 on port 0xAC07
> ATA: abnormal status 0xD0 on port 0xAC07
> ATA: abnormal status 0xD0 on port 0xAC07 [root@880-TEST root]$
> **********************************************************************
> **
> *********
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-03-11 22:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-03-11 15:08 Problem with sata driver Sion Khalaf
2006-03-11 22:03 Sion Khalaf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®