Re: [PATCH 4/4] ARM: dts: keystone-k2g-evm: Add gpio nodes

[Keerthy <j-keerthy@ti.com>]

On Wednesday 19 July 2017 12:43 AM, Suman Anna wrote:
> Hi Keerthy,
> 
> On 07/18/2017 05:57 AM, Keerthy wrote:
>> keystone-k2g has 2 instances of gpio. The first one has all the 144 GPIOs
> 
> Please use 66AK2G for keystone-k2g.

Okay

> 
>> functional( 9 banks with 16 gpios = 144). The second instance has
>> only the GPIO0:GPIO67 functional and rest are marked reserved.
>>
>> Signed-off-by: Keerthy <j-keerthy@ti.com>
>> ---
>>  arch/arm/boot/dts/keystone-k2g.dtsi | 42 +++++++++++++++++++++++++++++++++++++
>>  1 file changed, 42 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
>> index bf4d1fa..58ac3db 100644
>> --- a/arch/arm/boot/dts/keystone-k2g.dtsi
>> +++ b/arch/arm/boot/dts/keystone-k2g.dtsi
>> @@ -15,6 +15,7 @@
>>  
>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>>  #include <dt-bindings/pinctrl/keystone.h>
>> +#include <dt-bindings/gpio/gpio.h>
>>  
>>  / {
>>  	compatible = "ti,k2g","ti,keystone";
>> @@ -168,5 +169,46 @@
>>  				#reset-cells = <2>;
>>  			};
>>  		};
>> +
>> +		gpio0: gpio@2603000 {
>> +			compatible = "ti,keystone-k2g-gpio";
>> +			reg = <0x02603000 0x100>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +
>> +			interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			ti,ngpio = <144>;
>> +			ti,davinci-gpio-unbanked = <0>;
>> +			clocks = <&k2g_clks 0x001b 0x0>;
>> +			clock-names = "gpio";
> 
> I don't see the clocks and clock-names documented in the binding.
> Looking at davinci_gpio_irq_setup(), these are required, and a specific
> clock name is what the driver is looking for. And you have different
> semantics for this on K2G and non-K2G SoCs. Davinci platforms are using
> non-DT clocks, so their DT nodes didn't have them.

I will document the same.

> 
> regards
> Suman
> 
>> +		};
>> +
>> +		gpio1: gpio@260a000 {
>> +			compatible = "ti,keystone-k2g-gpio";
>> +			reg = <0x0260a000 0x100>;
>> +			gpio-controller;
>> +			#gpio-cells = <2>;
>> +			interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
>> +					<GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <2>;
>> +			ti,ngpio = <68>;
>> +			ti,davinci-gpio-unbanked = <0>;
>> +			clocks = <&k2g_clks 0x001c 0x0>;
>> +			clock-names = "gpio";
>> +		};
>>  	};
>>  };
>>
>