mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Arkadiusz Miskiewicz <misiek@pld.ORG.PL>
To: Andre Hedrick <andre@linuxdiskcert.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Andre IDE patches + Promise, UDMA detection
Date: 17 Jan 2002 09:31:55 +0100	[thread overview]
Message-ID: <87heplcr9g.fsf@arm.t19.ds.pwr.wroc.pl> (raw)
In-Reply-To: <Pine.LNX.4.10.10201161624120.30663-100000@master.linux-ide.org>
In-Reply-To: <Pine.LNX.4.10.10201161624120.30663-100000@master.linux-ide.org>

Andre Hedrick <andre@linuxdiskcert.org> writes:

> Because sometimes the decay rate of the capacitance check after execute
> drive diagnostics command from POST is faster than boot.
> 
> Also if this problem happens only after a cold boot, but a warm boot is
> valid, you can set the CONFIG_IDEDMA_IVB=y
Unfortunately problem always happens - cold boot, warm boot - no difference.
So setting CONFIG_IDEDMA_IVB=y won't help in this case?

My IDE config looks that:
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
CONFIG_IDE_TASKFILE_IO=y
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_CD_NO_IDESCSI=y

> > Unfortunately it thinks that all my harddrives (connected to promise
> > via 80wire cable) are UDMA33! Now _sometimes_ after boot it detects
> > these (properly) as UDMA100 and sometimes (seems more frequently)
> > as UDMA33.

> Andre Hedrick
> Linux Disk Certification Project                Linux ATA Development

-- 
Arkadiusz Miśkiewicz   IPv6 ready PLD Linux at http://www.pld.org.pl
misiek(at)pld.org.pl   AM2-6BONE, 1024/3DB19BBD, arekm(at)ircnet, PWr

      reply	other threads:[~2002-01-17  8:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-01-17  0:14 Arkadiusz Miskiewicz
2002-01-17  0:26 ` Andre Hedrick
2002-01-17  8:31   ` Arkadiusz Miskiewicz [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87heplcr9g.fsf@arm.t19.ds.pwr.wroc.pl \
    --to=misiek@pld.org.pl \
    --cc=andre@linuxdiskcert.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®