mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Olivier MOYSAN <olivier.moysan@foss.st.com>,
	Marek Vasut <marex@denx.de>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: <kernel@dh-electronics.com>, <devicetree@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 7/8] ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc
Date: Tue, 30 May 2023 09:59:59 +0200	[thread overview]
Message-ID: <8a4f3112-54ed-e0c1-52ee-395a41255163@foss.st.com> (raw)
In-Reply-To: <5bb496d0-6dc1-6ba3-6126-6429037ecf5a@foss.st.com>

Marek, Olivier

On 5/24/23 17:39, Olivier MOYSAN wrote:
> Hi Marek,
> 
> On 5/24/23 15:54, Marek Vasut wrote:
>> On 5/24/23 15:39, Olivier Moysan wrote:
>>> Use STM32 ADC generic bindings instead of legacy bindings on
>>> DHCOR DRC Compact board.
>>>
>>> The STM32 ADC specific binding to declare channels has been deprecated,
>>> hence adopt the generic IIO channels bindings, instead.
>>> The STM32MP151 device tree now exposes internal channels using the
>>> generic binding. This makes the change mandatory here to avoid a mixed
>>> use of legacy and generic binding, which is not supported by the driver.
>>>
>>> Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
>>> ---
>>>   .../dts/stm32mp15xx-dhcor-drc-compact.dtsi    | 28 ++++++++++++++++---
>>>   1 file changed, 24 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi 
>>> b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
>>> index 39af79dc654c..92d906bfd5d7 100644
>>> --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
>>> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-drc-compact.dtsi
>>> @@ -57,15 +57,35 @@ &adc {    /* X11 ADC inputs */
>>>       status = "okay";
>>>       adc1: adc@0 {
>>
>>
>> I sent similar patch recently too:
>>
>> [PATCH] ARM: dts: stm32: Update to generic ADC channel binding on 
>> DHSOM systems
>>
>> But I needed to add #address-cells/#size-cells here and to adc@100, 
>> otherwise DTB checker was complaining . Did you run DTB check and was 
>> it OK on your side ?
> 
> The first patch in this serie adds the #address-cells/#size-cells to the 
>   SoC DT. So, there is no need to add them later in the board DT.
> 
> I can send a v2 with your patch (after removing the cells properties 
> from the patch). Having all the patches in the same serie, will help 
> avoiding sequencing problems.
> 
> Do you agree with this ?

What is the status of this patch ?

Marek, I would prefer to take all ADC updates in this series if you agree.

Alex

> 
> BRs
> Olivier
> 
>>
>>> -        st,adc-channels = <0 1 6>;
>>> -        st,min-sample-time-nsecs = <5000>;
>>>           status = "okay";
>>> +        channel@0 {
>>> +            reg = <0>;
>>> +            st,min-sample-time-ns = <5000>;
>>> +        };
>>> +        channel@1 {
>>> +            reg = <1>;
>>> +            st,min-sample-time-ns = <5000>;
>>> +        };
>>> +        channel@6 {
>>> +            reg = <6>;
>>> +            st,min-sample-time-ns = <5000>;
>>> +        };
>>>       };
>>
>> [...]


  reply	other threads:[~2023-05-30  8:00 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-24 13:39 [PATCH 0/8] ARM: dts: stm32: add adc internal channels on stm32mp15 Olivier Moysan
2023-05-24 13:39 ` [PATCH 1/8] ARM: dts: stm32: add adc internal channels to stm32mp15 Olivier Moysan
2023-05-24 13:39 ` [PATCH 2/8] ARM: dts: stm32: add vrefint calibration on stm32mp15 Olivier Moysan
2023-05-24 13:39 ` [PATCH 3/8] ARM: dts: stm32: add vrefint support to adc2 " Olivier Moysan
2023-05-24 13:39 ` [PATCH 4/8] ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards Olivier Moysan
2023-05-24 13:39 ` [PATCH 5/8] ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 Olivier Moysan
2023-05-24 13:39 ` [PATCH 6/8] ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon Olivier Moysan
2023-05-24 13:39 ` [PATCH 7/8] ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc Olivier Moysan
2023-05-24 13:54   ` Marek Vasut
2023-05-24 15:39     ` Olivier MOYSAN
2023-05-30  7:59       ` Alexandre TORGUE [this message]
2023-05-30 11:42         ` Marek Vasut
2023-05-24 13:39 ` [PATCH 8/8] ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench Olivier Moysan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8a4f3112-54ed-e0c1-52ee-395a41255163@foss.st.com \
    --to=alexandre.torgue@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@dh-electronics.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=marex@denx.de \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=olivier.moysan@foss.st.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®