From: Roger Quadros <rogerq@kernel.org>
To: Siddharth Vadapalli <s-vadapalli@ti.com>,
nm@ti.com, vigneshr@ti.com, afd@ti.com, kristo@kernel.org,
robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, u-kumar1@ti.com,
danishanwar@ti.com, srk@ti.com
Subject: Re: [PATCH v5 1/7] arm64: dts: ti: am62p: Rename am62p-{}.dtsi to am62p-j722s-common-{}.dtsi
Date: Thu, 6 Jun 2024 10:51:27 +0300 [thread overview]
Message-ID: <92af5f36-0c21-4b6e-adde-fcf21b540291@kernel.org> (raw)
In-Reply-To: <20240604085252.3686037-2-s-vadapalli@ti.com>
On 04/06/2024 11:52, Siddharth Vadapalli wrote:
> The AM62P and J722S SoCs share most of the peripherals. With the aim of
> reusing the existing k3-am62p-{mcu,main,wakeup}.dtsi files for J722S SoC,
> rename them to indicate that they are shared with J722S SoC.
>
> The peripherals that are not shared will be moved in the upcoming patches
> to the respective k3-{soc}-{mcu,main,wakeup}.dtsi files without "common" in
> the filename, emphasizing that they are not shared.
>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> Acked-by: Andrew Davis <afd@ti.com>
> ---
> v4:
> https://lore.kernel.org/r/20240601121554.2860403-2-s-vadapalli@ti.com/
> Changes since v4:
> - Based on Andrew's feedback at:
> https://lore.kernel.org/r/086fa11e-10f8-463d-8966-1a33a52a3146@ti.com/
> MCU was retained as-is while main and wakeup were changed to MAIN and
> WAKEUP in the respective shared files.
> - Newline has been added between the file description and the Copyright
> in all the files.
> - Collected Acked-by tag since these changes have been made.
>
> .../{k3-am62p-main.dtsi => k3-am62p-j722s-common-main.dtsi} | 3 ++-
> .../{k3-am62p-mcu.dtsi => k3-am62p-j722s-common-mcu.dtsi} | 3 ++-
> ...-am62p-wakeup.dtsi => k3-am62p-j722s-common-wakeup.dtsi} | 3 ++-
> .../dts/ti/{k3-am62p.dtsi => k3-am62p-j722s-common.dtsi} | 6 +++---
> arch/arm64/boot/dts/ti/k3-am62p5.dtsi | 2 +-
> 5 files changed, 10 insertions(+), 7 deletions(-)
> rename arch/arm64/boot/dts/ti/{k3-am62p-main.dtsi => k3-am62p-j722s-common-main.dtsi} (99%)
> rename arch/arm64/boot/dts/ti/{k3-am62p-mcu.dtsi => k3-am62p-j722s-common-mcu.dtsi} (98%)
> rename arch/arm64/boot/dts/ti/{k3-am62p-wakeup.dtsi => k3-am62p-j722s-common-wakeup.dtsi} (97%)
> rename arch/arm64/boot/dts/ti/{k3-am62p.dtsi => k3-am62p-j722s-common.dtsi} (97%)
This is not correct.
If J722 has different CBASS components than AM62p then we should leave k3-am62p.dtsi
as it is and introduce a new k3-j722.dtsi with relevant CBASS components.
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> similarity index 99%
> rename from arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> rename to arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> index 900d1f9530a2..bf6384ba824a 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only OR MIT
> /*
> - * Device Tree file for the AM62P main domain peripherals
> + * Device Tree file for the MAIN domain peripherals shared by AM62P and J722S
> + *
> * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
> */
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
> similarity index 98%
> rename from arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
> rename to arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
> index b973b550eb9d..1d4e5fc8b4e0 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only OR MIT
> /*
> - * Device Tree file for the AM62P MCU domain peripherals
> + * Device Tree file for the MCU domain peripherals shared by AM62P and J722S
> + *
> * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
> */
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
> similarity index 97%
> rename from arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> rename to arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
> index c71d9624ea27..f6ec6e8e171d 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
> @@ -1,6 +1,7 @@
> // SPDX-License-Identifier: GPL-2.0-only OR MIT
> /*
> - * Device Tree file for the AM62P wakeup domain peripherals
> + * Device Tree file for the WAKEUP domain peripherals shared by AM62P and J722S
> + *
> * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
> */
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common.dtsi
> similarity index 97%
> rename from arch/arm64/boot/dts/ti/k3-am62p.dtsi
> rename to arch/arm64/boot/dts/ti/k3-am62p-j722s-common.dtsi
> index 94babc412575..d85d05e0792a 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common.dtsi
> @@ -120,6 +120,6 @@ cbass_wakeup: bus@b00000 {
> };
>
> /* Now include peripherals for each bus segment */
> -#include "k3-am62p-main.dtsi"
> -#include "k3-am62p-mcu.dtsi"
> -#include "k3-am62p-wakeup.dtsi"
> +#include "k3-am62p-j722s-common-main.dtsi"
> +#include "k3-am62p-j722s-common-mcu.dtsi"
> +#include "k3-am62p-j722s-common-wakeup.dtsi"
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
> index 41f479dca455..b7bb04a7968f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
> @@ -8,7 +8,7 @@
>
> /dts-v1/;
>
> -#include "k3-am62p.dtsi"
> +#include "k3-am62p-j722s-common.dtsi"
>
> / {
> cpus {
--
cheers,
-roger
next prev parent reply other threads:[~2024-06-06 7:51 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-04 8:52 [PATCH v5 0/7] Add PCIe, SERDES and USB DT support for J722S Siddharth Vadapalli
2024-06-04 8:52 ` [PATCH v5 1/7] arm64: dts: ti: am62p: Rename am62p-{}.dtsi to am62p-j722s-common-{}.dtsi Siddharth Vadapalli
2024-06-06 7:51 ` Roger Quadros [this message]
2024-06-07 11:28 ` Siddharth Vadapalli
2024-06-10 19:31 ` Roger Quadros
2024-06-11 8:54 ` Siddharth Vadapalli
2024-06-11 9:10 ` Vignesh Raghavendra
2024-06-11 17:18 ` Roger Quadros
2024-06-12 9:11 ` Siddharth Vadapalli
2024-06-04 8:52 ` [PATCH v5 2/7] arm64: dts: ti: k3-am62p-j722s: Move AM62P specific USB1 to am62p-main.dtsi Siddharth Vadapalli
2024-06-06 8:01 ` Roger Quadros
2024-06-04 8:52 ` [PATCH v5 3/7] arm64: dts: ti: k3-j722s: Add main domain peripherals specific to J722S Siddharth Vadapalli
2024-06-06 8:02 ` Roger Quadros
2024-06-04 8:52 ` [PATCH v5 4/7] arm64: dts: ti: k3-j722s: Switch to k3-am62p-j722s-common.dtsi Siddharth Vadapalli
2024-06-06 4:05 ` Vignesh Raghavendra
2024-06-06 7:34 ` Roger Quadros
2024-06-10 6:53 ` Vignesh Raghavendra
2024-06-04 8:52 ` [PATCH v5 5/7] arm64: dts: ti: k3-serdes: Add SERDES0/SERDES1 lane-muxing macros for J722S Siddharth Vadapalli
2024-06-06 7:35 ` Roger Quadros
2024-06-04 8:52 ` [PATCH v5 6/7] arm64: dts: ti: k3-j722s-main: Add SERDES and PCIe support Siddharth Vadapalli
2024-06-06 8:04 ` Roger Quadros
2024-06-04 8:52 ` [PATCH v5 7/7] arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM Siddharth Vadapalli
2024-06-06 8:05 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=92af5f36-0c21-4b6e-adde-fcf21b540291@kernel.org \
--to=rogerq@kernel.org \
--cc=afd@ti.com \
--cc=conor+dt@kernel.org \
--cc=danishanwar@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh@kernel.org \
--cc=s-vadapalli@ti.com \
--cc=srk@ti.com \
--cc=u-kumar1@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®