From: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
To: Sneh Mankad <sneh.mankad@oss.qualcomm.com>,
Thomas Gleixner <tglx@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Pavel Machek <pavel@kernel.org>, Len Brown <lenb@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: Re: [PATCH] kernel/cpu: Disallow offlining boot CPU based on config
Date: Tue, 23 Jun 2026 13:40:22 +0200 [thread overview]
Message-ID: <9b5ea951-6880-4ce8-8764-fd6bf2bd57a0@oss.qualcomm.com> (raw)
In-Reply-To: <20260605-disable_boot_cpu_offline-v1-1-4c68fe1a6cf8@oss.qualcomm.com>
Hi Sned,
On 6/5/26 12:30, Sneh Mankad wrote:
> The Qualcomm SoCs like LeMans, Monaco support suspend to ram which leads
> the SoC to ACPI S3 similar state where SoC is turned off and DDR is
> retained.
> The hardware design on these SoCs forces a constraint to suspend and
> resume the system on boot CPU / CPU0.
>
> If CPU0 is already offline before starting suspend to ram the
> freeze_secondary_cpus() picks alternate CPU as primary / last CPU and
> proceed further to invoke PSCI SYSTEM_SUSPEND.
> This leads to a system crash.
>
> In order to prevent such an issue introduce PM_SLEEP_SMP_CPU_ZERO_STRICT
> config and when enabled prohibit the CPU0 to be offline.
What is the status of this change ? Are you planning to send a new
version with the check inside arch_cpu_is_hotpluggable() ?
> Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
> ---
> kernel/cpu.c | 4 ++++
> kernel/power/Kconfig | 8 ++++++++
> 2 files changed, 12 insertions(+)
>
> diff --git a/kernel/cpu.c b/kernel/cpu.c
> index bc4f7a9ba64e62d76fbb2b362f243c918defe5bc..1c878db1d9cb6df0e31cb55343851aab4e38a3a0 100644
> --- a/kernel/cpu.c
> +++ b/kernel/cpu.c
> @@ -1478,6 +1478,10 @@ static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target)
> */
> if (cpu_hotplug_offline_disabled)
> return -EOPNOTSUPP;
> +#ifdef CONFIG_PM_SLEEP_SMP_CPU_ZERO_STRICT
> + if (cpu == get_boot_cpu_id())
> + return -EPERM;
> +#endif
> if (cpu_hotplug_disabled)
> return -EBUSY;
> return _cpu_down(cpu, 0, target);
> diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
> index 05337f437cca29da57864583166d7f9abd526507..0b342b3a4a5650a1927dc4805d1515e1d9e067c6 100644
> --- a/kernel/power/Kconfig
> +++ b/kernel/power/Kconfig
> @@ -401,3 +401,11 @@ config ENERGY_MODEL
> The exact usage of the energy model is subsystem-dependent.
>
> If in doubt, say N.
> +
> +config PM_SLEEP_SMP_CPU_ZERO_STRICT
> + bool "Disallow boot CPU (CPU0) offline"
> + depends on HOTPLUG_CPU
> + depends on SUSPEND
> + help
> + Disallow boot CPU (CPU0) offline when the suspend_ops->enter()
> + has to be executed by boot CPU.
>
> ---
> base-commit: ba3e43a9e601636f5edb54e259a74f96ca3b8fd8
> change-id: 20260603-disable_boot_cpu_offline-eb4f55ac96f2
>
> Best regards,
next prev parent reply other threads:[~2026-06-23 11:40 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-05 10:30 Sneh Mankad
2026-06-05 10:43 ` Peter Zijlstra
2026-06-05 12:20 ` Thomas Gleixner
2026-06-15 12:13 ` Daniel Lezcano
2026-06-05 13:07 ` Pankaj Patil
2026-06-23 11:40 ` Daniel Lezcano [this message]
2026-07-03 11:23 ` Sneh Mankad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9b5ea951-6880-4ce8-8764-fd6bf2bd57a0@oss.qualcomm.com \
--to=daniel.lezcano@oss.qualcomm.com \
--cc=lenb@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=peterz@infradead.org \
--cc=rafael@kernel.org \
--cc=sneh.mankad@oss.qualcomm.com \
--cc=tglx@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®