* [PATCH v5 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices
2023-05-03 12:32 [PATCH v5 0/3] Add support for ESM Neha Malcom Francis
@ 2023-05-03 12:32 ` Neha Malcom Francis
2023-05-04 6:51 ` Krzysztof Kozlowski
2023-05-03 12:32 ` [PATCH v5 2/3] arm64: dts: ti: k3-j721e: Add ESM support Neha Malcom Francis
2023-05-03 12:32 ` [PATCH v5 3/3] arm64: dts: ti: k3-j7200: " Neha Malcom Francis
2 siblings, 1 reply; 6+ messages in thread
From: Neha Malcom Francis @ 2023-05-03 12:32 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, devicetree, linux-kernel,
linux-arm-kernel
Cc: n-francis, nm, vigneshr, kristo, u-kumar1
Document the binding for TI K3 ESM (Error Signaling Module) block.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
.../bindings/misc/ti,j721e-esm.yaml | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
diff --git a/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
new file mode 100644
index 000000000000..408296157576
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/ti,j721e-esm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 ESM
+
+maintainers:
+ - Neha Malcom Francis <n-francis@ti.com>
+
+description:
+ The ESM (Error Signaling Module) is an IP block on TI K3 devices
+ that allows handling of safety events somewhat similar to what interrupt
+ controller would do. The safety signals have their separate paths within
+ the SoC, and they are handled by the ESM, which routes them to the proper
+ destination, which can be system reset, interrupt controller, etc. In the
+ simplest configuration the signals are just routed to reset the SoC.
+
+properties:
+ compatible:
+ const: ti,j721e-esm
+
+ reg:
+ maxItems: 1
+
+ ti,esm-pins:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ integer array of ESM interrupt pins to route to external event pin
+ which can be used to reset the SoC.
+ minItems: 1
+ maxItems: 255
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ti,esm-pins
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <344>, <345>;
+ };
+ };
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH v5 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices
2023-05-03 12:32 ` [PATCH v5 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices Neha Malcom Francis
@ 2023-05-04 6:51 ` Krzysztof Kozlowski
2023-05-04 7:43 ` Neha Malcom Francis
0 siblings, 1 reply; 6+ messages in thread
From: Krzysztof Kozlowski @ 2023-05-04 6:51 UTC (permalink / raw)
To: Neha Malcom Francis, robh+dt, krzysztof.kozlowski+dt, devicetree,
linux-kernel, linux-arm-kernel
Cc: nm, vigneshr, kristo, u-kumar1
On 03/05/2023 14:32, Neha Malcom Francis wrote:
> Document the binding for TI K3 ESM (Error Signaling Module) block.
>
> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
???
You were already asked to keep it and it was in v4, so you had to
explicitly remove it from your git... It takes me time to figure out
what is happening here. But ok, if you do not keep my review, comment
follows.
...
> + ti,esm-pins:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description:
> + integer array of ESM interrupt pins to route to external event pin
> + which can be used to reset the SoC.
> + minItems: 1
> + maxItems: 255
> +
> +additionalProperties: false
Put aditionalProperties after required:, just like in example-schema.
> +
> +required:
> + - compatible
> + - reg
> + - ti,esm-pins
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices
2023-05-04 6:51 ` Krzysztof Kozlowski
@ 2023-05-04 7:43 ` Neha Malcom Francis
0 siblings, 0 replies; 6+ messages in thread
From: Neha Malcom Francis @ 2023-05-04 7:43 UTC (permalink / raw)
To: Krzysztof Kozlowski, robh+dt, krzysztof.kozlowski+dt, devicetree,
linux-kernel, linux-arm-kernel
Cc: nm, vigneshr, kristo, u-kumar1
Hi Krzysztof
On 04/05/23 12:21, Krzysztof Kozlowski wrote:
> On 03/05/2023 14:32, Neha Malcom Francis wrote:
>> Document the binding for TI K3 ESM (Error Signaling Module) block.
>>
>> Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
>
> ???
>
> You were already asked to keep it and it was in v4, so you had to
> explicitly remove it from your git... It takes me time to figure out
> what is happening here. But ok, if you do not keep my review, comment
> follows.
>
> ...
Really sorry about that, forgot to add it back for v5. Sending next
version soon...
>
>> + ti,esm-pins:
>> + $ref: /schemas/types.yaml#/definitions/uint32-array
>> + description:
>> + integer array of ESM interrupt pins to route to external event pin
>> + which can be used to reset the SoC.
>> + minItems: 1
>> + maxItems: 255
>> +
>> +additionalProperties: false
>
> Put aditionalProperties after required:, just like in example-schema.
>
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - ti,esm-pins
>
>
>
> Best regards,
> Krzysztof
>
--
Thanking You
Neha Malcom Francis
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v5 2/3] arm64: dts: ti: k3-j721e: Add ESM support
2023-05-03 12:32 [PATCH v5 0/3] Add support for ESM Neha Malcom Francis
2023-05-03 12:32 ` [PATCH v5 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices Neha Malcom Francis
@ 2023-05-03 12:32 ` Neha Malcom Francis
2023-05-03 12:32 ` [PATCH v5 3/3] arm64: dts: ti: k3-j7200: " Neha Malcom Francis
2 siblings, 0 replies; 6+ messages in thread
From: Neha Malcom Francis @ 2023-05-03 12:32 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, devicetree, linux-kernel,
linux-arm-kernel
Cc: n-francis, nm, vigneshr, kristo, u-kumar1
Add address entry mapping ESM on J721E.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 6 ++++++
arch/arm64/boot/dts/ti/k3-j721e.dtsi | 1 +
2 files changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 10c8a5fb4ee2..91f7e5d03440 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -2532,4 +2532,10 @@ main_spi7: spi@2170000 {
clocks = <&k3_clks 273 1>;
status = "disabled";
};
+
+ main_esm: esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <344>, <345>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index b912143b6a11..52bcde601eb8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -131,6 +131,7 @@ cbass_main: bus@100000 {
#size-cells = <2>;
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
<0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
<0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH v5 3/3] arm64: dts: ti: k3-j7200: Add ESM support
2023-05-03 12:32 [PATCH v5 0/3] Add support for ESM Neha Malcom Francis
2023-05-03 12:32 ` [PATCH v5 1/3] dt-bindings: misc: esm: Add ESM support for TI K3 devices Neha Malcom Francis
2023-05-03 12:32 ` [PATCH v5 2/3] arm64: dts: ti: k3-j721e: Add ESM support Neha Malcom Francis
@ 2023-05-03 12:32 ` Neha Malcom Francis
2 siblings, 0 replies; 6+ messages in thread
From: Neha Malcom Francis @ 2023-05-03 12:32 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, devicetree, linux-kernel,
linux-arm-kernel
Cc: n-francis, nm, vigneshr, kristo, u-kumar1
Add address entry mapping ESM on J7200.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 ++++++
arch/arm64/boot/dts/ti/k3-j7200.dtsi | 1 +
2 files changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index ef352e32f19d..89f816f5e53d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -1010,4 +1010,10 @@ main_r5fss0_core1: r5f@5d00000 {
ti,loczrama = <1>;
};
};
+
+ main_esm: esm@700000 {
+ compatible = "ti,j721e-esm";
+ reg = <0x0 0x700000 0x0 0x1000>;
+ ti,esm-pins = <656>, <657>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index bbe380c72a7e..4998eb4fbe75 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -128,6 +128,7 @@ cbass_main: bus@100000 {
#size-cells = <2>;
ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
<0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
<0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
<0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
--
2.34.1
^ permalink raw reply [flat|nested] 6+ messages in thread