From: "Riley Williams" <Riley@Williams.Name>
To: "Mr. James W. Laferriere" <babydr@baby-dragons.com>
Cc: "Linux Kernel Maillist" <linux-kernel@vger.kernel.org>
Subject: RE: /proc/bus/pci
Date: Fri, 13 Jun 2003 18:59:58 +0100 [thread overview]
Message-ID: <BKEGKPICNAKILKJKMHCACECCEFAA.Riley@Williams.Name> (raw)
In-Reply-To: <Pine.LNX.4.56.0306131226130.3625@filesrv1.baby-dragons.com>
Hi James.
>> All forms of hard disk interface - that I do know.
>>
>> ST-506 = Seagate Technology model 506 hard drive
>> (which set the MFM and RLL standards)
> st506 was ONLY mfm. There were no st506 drive that had
> RLL encodings.
Curiously enough, my first hard drive was an ST-506 used with
an RLL controller for the usual 45% increase in capacity. All
I can say is that it worked fine from when I bought it new
(for £350.00) through to when I had to replace the (genuine
IBM) PC/XT motherboard after it failed.
The new motherboard was a 386dx/25 and had on-board IDE and
related, so I had to get an IDE drive at the same time.
Oh - yes, I was shocked at the speed difference between the
two systems. Then again, who wouldn't be...
Best wishes from Riley.
---
* Nothing as pretty as a smile, nothing as ugly as a frown.
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.488 / Virus Database: 287 - Release Date: 5-Jun-2003
next prev parent reply other threads:[~2003-06-13 17:46 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20030605125013$41ac@gated-at.bofh.it>
[not found] ` <20030605160017$10e1@gated-at.bofh.it>
2003-06-05 16:41 ` /proc/bus/pci Julien Oster
2003-06-05 16:57 ` /proc/bus/pci Mike Dresser
2003-06-05 17:00 ` /proc/bus/pci Richard B. Johnson
2003-06-07 0:31 ` /proc/bus/pci Robert White
2003-06-05 20:49 ` /proc/bus/pci Michal Jaegermann
2003-06-12 4:29 ` /proc/bus/pci Andre Hedrick
2003-06-13 7:10 ` /proc/bus/pci Riley Williams
2003-06-13 8:43 ` /proc/bus/pci Olivier Galibert
2003-06-13 16:28 ` /proc/bus/pci Mr. James W. Laferriere
2003-06-13 17:59 ` Riley Williams [this message]
2003-06-13 19:37 ` /proc/bus/pci Mr. James W. Laferriere
2003-06-09 17:03 /proc/bus/pci Grover, Andrew
-- strict thread matches above, loose matches on Subject: below --
2003-06-05 3:21 /proc/bus/pci Albert Cahalan
2003-06-05 3:35 ` /proc/bus/pci William Lee Irwin III
2003-06-05 4:23 ` /proc/bus/pci Linus Torvalds
2003-06-05 5:01 ` /proc/bus/pci David S. Miller
2003-06-05 12:05 ` /proc/bus/pci Albert Cahalan
2003-06-05 12:16 ` /proc/bus/pci David S. Miller
2003-06-05 12:42 ` /proc/bus/pci Albert Cahalan
2003-06-05 12:36 ` /proc/bus/pci Albert Cahalan
2003-06-05 15:51 ` /proc/bus/pci Linus Torvalds
2003-06-05 16:00 ` /proc/bus/pci William Lee Irwin III
2003-06-05 17:23 ` /proc/bus/pci Benjamin Herrenschmidt
2003-06-05 17:36 ` /proc/bus/pci William Lee Irwin III
2003-06-05 17:18 ` /proc/bus/pci Riley Williams
2003-06-06 16:30 ` /proc/bus/pci Ross Biro
2003-06-06 18:13 ` /proc/bus/pci Riley Williams
2003-06-07 2:02 ` /proc/bus/pci Horst von Brand
2003-06-07 0:25 ` /proc/bus/pci Robert White
2003-06-07 0:35 ` /proc/bus/pci Linus Torvalds
2003-06-07 1:01 ` /proc/bus/pci Robert White
2003-06-07 1:43 ` /proc/bus/pci Albert Cahalan
2003-06-05 12:43 ` /proc/bus/pci Benjamin Herrenschmidt
2003-06-05 16:58 ` /proc/bus/pci Greg KH
2003-06-05 18:27 ` /proc/bus/pci Matt Wilson
2003-06-05 19:35 ` /proc/bus/pci Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BKEGKPICNAKILKJKMHCACECCEFAA.Riley@Williams.Name \
--to=riley@williams.name \
--cc=babydr@baby-dragons.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®