From: "Andrew Chew" <achew@nvidia.com>
To: "Jeff Garzik" <jgarzik@pobox.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-ide@vger.kernel.org>
Subject: [PATCH 2.6.8-rc2] sata_nv.c
Date: Thu, 5 Aug 2004 14:31:05 -0700 [thread overview]
Message-ID: <DBFABB80F7FD3143A911F9E6CFD477B03F9620@hqemmail02.nvidia.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 446 bytes --]
Attached is a patch to the sata_nv driver that accounts for a few
differences between the nForce3 and CK804/MCP04 SATA controllers.
A minor change to libata-core.c needs to accompany this patch. This is
in regards to the function ata_pci_remove_one(), where the
host_set->ops->host_stop(host_set) needs to occur before the
iounmap(host_set->mmio_base). This is because sata_nv's host_stop
callback needs access to the iomapped region.
[-- Attachment #2: sata2-6.diff --]
[-- Type: application/octet-stream, Size: 13342 bytes --]
--- linux-2.6.8-rc2/drivers/scsi/sata_nv.c 2004-08-05 14:17:31.711899672 -0700
+++ linux/drivers/scsi/sata_nv.c 2004-08-05 14:20:32.440424760 -0700
@@ -20,6 +20,11 @@
* If you do not delete the provisions above, a recipient may use your
* version of this file under either the OSL or the GPL.
*
+ * 0.02
+ * - Added support for CK804 SATA controller.
+ *
+ * 0.01
+ * - Initial revision.
*/
#include <linux/config.h>
@@ -35,7 +40,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_nv"
-#define DRV_VERSION "0.01"
+#define DRV_VERSION "0.02"
#define NV_PORTS 2
#define NV_PIO_MASK 0x1f
@@ -46,6 +51,7 @@
#define NV_PORT1_SCR_REG_OFFSET 0x40
#define NV_INT_STATUS 0x10
+#define NV_INT_STATUS_CK804 0x440
#define NV_INT_STATUS_PDEV_INT 0x01
#define NV_INT_STATUS_PDEV_PM 0x02
#define NV_INT_STATUS_PDEV_ADDED 0x04
@@ -62,6 +68,7 @@
NV_INT_STATUS_SDEV_HOTPLUG)
#define NV_INT_ENABLE 0x11
+#define NV_INT_ENABLE_CK804 0x441
#define NV_INT_ENABLE_PDEV_MASK 0x01
#define NV_INT_ENABLE_PDEV_PM 0x02
#define NV_INT_ENABLE_PDEV_ADDED 0x04
@@ -80,30 +87,86 @@
#define NV_INT_CONFIG 0x12
#define NV_INT_CONFIG_METHD 0x01 // 0 = INT, 1 = SMI
+// For PCI config register 20
+#define NV_MCP_SATA_CFG_20 0x50
+#define NV_MCP_SATA_CFG_20_SATA_SPACE_EN 0x04
+
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
irqreturn_t nv_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void nv_host_stop (struct ata_host_set *host_set);
+static void nv_enable_hotplug(struct ata_probe_ent *probe_ent);
+static void nv_disable_hotplug(struct ata_host_set *host_set);
+static void nv_check_hotplug(struct ata_host_set *host_set);
+static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent);
+static void nv_disable_hotplug_ck804(struct ata_host_set *host_set);
+static void nv_check_hotplug_ck804(struct ata_host_set *host_set);
+
+enum nv_host_type
+{
+ NFORCE2,
+ NFORCE3,
+ CK804
+};
static struct pci_device_id nv_pci_tbl[] = {
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,
- PCI_ANY_ID, PCI_ANY_ID, },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,
- PCI_ANY_ID, PCI_ANY_ID, },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,
- PCI_ANY_ID, PCI_ANY_ID, },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA,
- PCI_ANY_ID, PCI_ANY_ID, },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2,
- PCI_ANY_ID, PCI_ANY_ID, },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA,
- PCI_ANY_ID, PCI_ANY_ID, },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
- PCI_ANY_ID, PCI_ANY_ID, },
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
{ 0, } /* terminate list */
};
+#define NV_HOST_FLAGS_SCR_MMIO 0x00000001
+
+struct nv_host_desc
+{
+ enum nv_host_type host_type;
+ unsigned long host_flags;
+ void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
+ void (*disable_hotplug)(struct ata_host_set *host_set);
+ void (*check_hotplug)(struct ata_host_set *host_set);
+
+};
+static struct nv_host_desc nv_device_tbl[] = {
+ {
+ .host_type = NFORCE2,
+ .host_flags = 0x00000000,
+ .enable_hotplug = nv_enable_hotplug,
+ .disable_hotplug= nv_disable_hotplug,
+ .check_hotplug = nv_check_hotplug,
+ },
+ {
+ .host_type = NFORCE3,
+ .host_flags = 0x00000000,
+ .enable_hotplug = nv_enable_hotplug,
+ .disable_hotplug= nv_disable_hotplug,
+ .check_hotplug = nv_check_hotplug,
+ },
+ { .host_type = CK804,
+ .host_flags = NV_HOST_FLAGS_SCR_MMIO,
+ .enable_hotplug = nv_enable_hotplug_ck804,
+ .disable_hotplug= nv_disable_hotplug_ck804,
+ .check_hotplug = nv_check_hotplug_ck804,
+ },
+};
+
+struct nv_host
+{
+ struct nv_host_desc *host_desc;
+};
+
static struct pci_driver nv_pci_driver = {
.name = DRV_NAME,
.id_table = nv_pci_tbl,
@@ -158,11 +221,10 @@
irqreturn_t nv_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
{
struct ata_host_set *host_set = dev_instance;
+ struct nv_host *host = host_set->private_data;
unsigned int i;
unsigned int handled = 0;
unsigned long flags;
- u8 intr_status;
- u8 intr_enable;
spin_lock_irqsave(&host_set->lock, flags);
@@ -178,35 +240,11 @@
handled += ata_host_intr(ap, qc);
}
- intr_status = inb(ap->ioaddr.scr_addr + NV_INT_STATUS);
- intr_enable = inb(ap->ioaddr.scr_addr + NV_INT_ENABLE);
-
- // Clear interrupt status.
- outb(0xff, ap->ioaddr.scr_addr + NV_INT_STATUS);
-
- if (intr_status & NV_INT_STATUS_HOTPLUG) {
- if (intr_status & NV_INT_STATUS_PDEV_ADDED) {
- printk(KERN_WARNING "ata%u: "
- "Primary device added\n", ap->id);
- }
-
- if (intr_status & NV_INT_STATUS_PDEV_REMOVED) {
- printk(KERN_WARNING "ata%u: "
- "Primary device removed\n", ap->id);
- }
-
- if (intr_status & NV_INT_STATUS_SDEV_ADDED) {
- printk(KERN_WARNING "ata%u: "
- "Secondary device added\n", ap->id);
- }
-
- if (intr_status & NV_INT_STATUS_SDEV_REMOVED) {
- printk(KERN_WARNING "ata%u: "
- "Secondary device removed\n", ap->id);
- }
- }
}
+ if (host->host_desc->check_hotplug)
+ host->host_desc->check_hotplug(host_set);
+
spin_unlock_irqrestore(&host_set->lock, flags);
return IRQ_RETVAL(handled);
@@ -214,41 +252,48 @@
static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
{
+ struct ata_host_set *host_set = ap->host_set;
+ struct nv_host *host = host_set->private_data;
+
if (sc_reg > SCR_CONTROL)
return 0xffffffffU;
- return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
+ if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ return readl(ap->ioaddr.scr_addr + (sc_reg * 4));
+ else
+ return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
{
+ struct ata_host_set *host_set = ap->host_set;
+ struct nv_host *host = host_set->private_data;
+
if (sc_reg > SCR_CONTROL)
return;
- outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+ if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ writel(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+ else
+ outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
}
static void nv_host_stop (struct ata_host_set *host_set)
{
- int i;
+ struct nv_host *host = host_set->private_data;
- for (i=0; i<host_set->n_ports; i++) {
- u8 intr_mask;
+ // Disable hotplug event interrupts.
+ if (host->host_desc->disable_hotplug)
+ host->host_desc->disable_hotplug(host_set);
- // Disable hotplug event interrupts.
- intr_mask = inb(host_set->ports[i]->ioaddr.scr_addr +
- NV_INT_ENABLE);
- intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
- outb(intr_mask, host_set->ports[i]->ioaddr.scr_addr +
- NV_INT_ENABLE);
- }
+ kfree(host);
}
static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version = 0;
+ struct nv_host *host;
struct ata_probe_ent *probe_ent = NULL;
- int i;
int rc;
if (!printed_version++)
@@ -275,6 +320,14 @@
goto err_out_regions;
}
+ host = kmalloc(sizeof(struct nv_host), GFP_KERNEL);
+ if (!host) {
+ rc = -ENOMEM;
+ goto err_out_free_ent;
+ }
+
+ host->host_desc = &nv_device_tbl[ent->driver_data];
+
memset(probe_ent, 0, sizeof(*probe_ent));
INIT_LIST_HEAD(&probe_ent->node);
@@ -284,6 +337,7 @@
ATA_FLAG_SATA_RESET |
ATA_FLAG_SRST |
ATA_FLAG_NO_LEGACY;
+
probe_ent->port_ops = &nv_ops;
probe_ent->n_ports = NV_PORTS;
probe_ent->irq = pdev->irq;
@@ -298,8 +352,6 @@
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
probe_ent->port[0].bmdma_addr =
pci_resource_start(pdev, 4) | NV_PORT0_BMDMA_REG_OFFSET;
- probe_ent->port[0].scr_addr =
- pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;
probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2);
ata_std_ports(&probe_ent->port[1]);
@@ -308,31 +360,48 @@
pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
probe_ent->port[1].bmdma_addr =
pci_resource_start(pdev, 4) | NV_PORT1_BMDMA_REG_OFFSET;
- probe_ent->port[1].scr_addr =
- pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;
- pci_set_master(pdev);
+ probe_ent->private_data = host;
- rc = ata_device_add(probe_ent);
- if (rc != NV_PORTS)
- goto err_out_regions;
+ if (host->host_desc->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
+ unsigned long base;
- // Enable hotplug event interrupts.
- for (i=0; i<probe_ent->n_ports; i++) {
- u8 intr_mask;
+ probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),
+ pci_resource_len(pdev, 5));
+ if (probe_ent->mmio_base == NULL)
+ goto err_out_free_ent;
+
+ base = (unsigned long)probe_ent->mmio_base;
+
+ probe_ent->port[0].scr_addr =
+ base + NV_PORT0_SCR_REG_OFFSET;
+ probe_ent->port[1].scr_addr =
+ base + NV_PORT1_SCR_REG_OFFSET;
+ } else {
+
+ probe_ent->port[0].scr_addr =
+ pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;
+ probe_ent->port[1].scr_addr =
+ pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;
+ }
- outb(NV_INT_STATUS_HOTPLUG, probe_ent->port[i].scr_addr +
- NV_INT_STATUS);
+ pci_set_master(pdev);
- intr_mask = inb(probe_ent->port[i].scr_addr + NV_INT_ENABLE);
- intr_mask |= NV_INT_ENABLE_HOTPLUG;
- outb(intr_mask, probe_ent->port[i].scr_addr + NV_INT_ENABLE);
- }
+ // Enable hotplug event interrupts.
+ if (host->host_desc->enable_hotplug)
+ host->host_desc->enable_hotplug(probe_ent);
+
+ rc = ata_device_add(probe_ent);
+ if (rc != NV_PORTS)
+ goto err_out_free_ent;
kfree(probe_ent);
return 0;
+err_out_free_ent:
+ kfree(probe_ent);
+
err_out_regions:
pci_release_regions(pdev);
@@ -341,6 +410,119 @@
return rc;
}
+static void nv_enable_hotplug(struct ata_probe_ent *probe_ent)
+{
+ u8 intr_mask;
+
+ outb(NV_INT_STATUS_HOTPLUG,
+ (unsigned long)probe_ent->mmio_base + NV_INT_STATUS);
+
+ intr_mask = inb((unsigned long)probe_ent->mmio_base + NV_INT_ENABLE);
+ intr_mask |= NV_INT_ENABLE_HOTPLUG;
+
+ outb(intr_mask, (unsigned long)probe_ent->mmio_base + NV_INT_ENABLE);
+}
+
+static void nv_disable_hotplug(struct ata_host_set *host_set)
+{
+ u8 intr_mask;
+
+ intr_mask = inb((unsigned long)host_set->mmio_base + NV_INT_ENABLE);
+
+ intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
+
+ outb(intr_mask, (unsigned long)host_set->mmio_base + NV_INT_ENABLE);
+}
+
+static void nv_check_hotplug(struct ata_host_set *host_set)
+{
+ u8 intr_status;
+
+ intr_status = inb((unsigned long)host_set->mmio_base + NV_INT_STATUS);
+
+ // Clear interrupt status.
+ outb(0xff, (unsigned long)host_set->mmio_base + NV_INT_STATUS);
+
+ if (intr_status & NV_INT_STATUS_HOTPLUG) {
+ if (intr_status & NV_INT_STATUS_PDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device added\n");
+
+ if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device removed\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device added\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device removed\n");
+ }
+}
+
+static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent)
+{
+ u8 intr_mask;
+ u8 regval;
+
+ pci_read_config_byte(probe_ent->pdev, NV_MCP_SATA_CFG_20, ®val);
+ regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
+ pci_write_config_byte(probe_ent->pdev, NV_MCP_SATA_CFG_20, regval);
+
+ writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804);
+
+ intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804);
+ intr_mask |= NV_INT_ENABLE_HOTPLUG;
+
+ writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804);
+}
+
+static void nv_disable_hotplug_ck804(struct ata_host_set *host_set)
+{
+ u8 intr_mask;
+ u8 regval;
+
+ intr_mask = readb(host_set->mmio_base + NV_INT_ENABLE_CK804);
+
+ intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
+
+ writeb(intr_mask, host_set->mmio_base + NV_INT_ENABLE_CK804);
+
+ pci_read_config_byte(host_set->pdev, NV_MCP_SATA_CFG_20, ®val);
+ regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
+ pci_write_config_byte(host_set->pdev, NV_MCP_SATA_CFG_20, regval);
+}
+
+static void nv_check_hotplug_ck804(struct ata_host_set *host_set)
+{
+ u8 intr_status;
+
+ intr_status = readb(host_set->mmio_base + NV_INT_STATUS_CK804);
+
+ // Clear interrupt status.
+ writeb(0xff, host_set->mmio_base + NV_INT_STATUS_CK804);
+
+ if (intr_status & NV_INT_STATUS_HOTPLUG) {
+ if (intr_status & NV_INT_STATUS_PDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device added\n");
+
+ if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device removed\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device added\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device removed\n");
+ }
+}
+
static int __init nv_init(void)
{
return pci_module_init(&nv_pci_driver);
next reply other threads:[~2004-08-05 21:34 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-05 21:31 Andrew Chew [this message]
2004-08-05 21:53 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2004-08-05 22:06 Andrew Chew
2004-07-27 20:26 Andrew Chew
2004-07-27 18:45 Andrew Chew
2004-07-27 18:55 ` Jeff Garzik
2004-07-22 21:38 Andrew Chew
2004-07-27 17:07 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DBFABB80F7FD3143A911F9E6CFD477B03F9620@hqemmail02.nvidia.com \
--to=achew@nvidia.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®