[PATCH 0/3] Support for the Samsung Galaxy Book2 Go (SC7280)

[PATCH 0/3] Support for the Samsung Galaxy Book2 Go (SC7280)

[Luca Weiss]

Add basic support for the Samsung Galaxy Book2 Go laptop. Basic support
is just eDP panel support, devicetree bindings and a devicetree.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Jasper Korten (2):
      drm/panel-edp: Add AUO B140HAN04.0 panel entry
      arm64: dts: qcom: Add Samsung Galaxy Book2 Go

Luca Weiss (1):
      dt-bindings: arm: qcom: Add Samsung Galaxy Book2 Go

 Documentation/devicetree/bindings/arm/qcom.yaml    |   5 +
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../dts/qcom/sc7280-samsung-galaxy-book2-go.dts    | 643 +++++++++++++++++++++
 drivers/gpu/drm/panel/panel-edp.c                  |   1 +
 4 files changed, 650 insertions(+)
---
base-commit: d970aefaa8160df2d536a71cee2d3df9ff65889c
change-id: 20261011-book2go-b0e945e53fdb

Best regards,
--  
Luca Weiss <luca.weiss@fairphone.com>

[PATCH 1/3] drm/panel-edp: Add AUO B140HAN04.0 panel entry

[Luca Weiss]

From: Jasper Korten <jja2000@gmail.com>

Add an entry for the B140HAN04.0 eDP panel. It is found on the Samsung
Galaxy Book2 Go.

$ edid-decode /sys/class/drm/card0-eDP-1/edid

00 ff ff ff ff ff ff 00 06 af a9 65 00 00 00 00
28 20 01 04 a5 1f 11 78 02 9b 85 92 56 59 90 29
20 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10
3e 00 35 ae 10 00 00 18 00 00 00 0f 00 00 00 00
00 00 00 00 00 00 00 00 00 20 00 00 00 fe 00 41
55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
00 42 31 34 30 48 41 4e 30 34 2e 30 20 0a 00 ed

Signed-off-by: Jasper Korten <jja2000@gmail.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 drivers/gpu/drm/panel/panel-edp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
index 2b455369ed70..73cdc2d37ab7 100644
--- a/drivers/gpu/drm/panel/panel-edp.c
+++ b/drivers/gpu/drm/panel/panel-edp.c
@@ -1986,6 +1986,7 @@ static const struct edp_panel_entry edp_panels[] = {
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x643d, &delay_200_500_e50, "B140HAN06.4"),
+	EDP_PANEL_ENTRY('A', 'U', 'O', 0x65a9, &delay_200_500_e50, "B140HAN04.0"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x67a8, &delay_200_500_e200, "B140XTK02.4"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x723c, &delay_200_500_e50, "B140XTN07.2"),
 	EDP_PANEL_ENTRY('A', 'U', 'O', 0x73aa, &delay_200_500_e50, "B116XTN02.3"),

-- 
2.56.0

Re: [PATCH 1/3] drm/panel-edp: Add AUO B140HAN04.0 panel entry

[Doug Anderson]

Hi,

On Mon, Oct 12, 2026 at 11:11 AM Luca Weiss <luca.weiss@fairphone.com> wrote:
>
> From: Jasper Korten <jja2000@gmail.com>
>
> Add an entry for the B140HAN04.0 eDP panel. It is found on the Samsung
> Galaxy Book2 Go.
>
> $ edid-decode /sys/class/drm/card0-eDP-1/edid
>
> 00 ff ff ff ff ff ff 00 06 af a9 65 00 00 00 00
> 28 20 01 04 a5 1f 11 78 02 9b 85 92 56 59 90 29
> 20 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
> 01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10
> 3e 00 35 ae 10 00 00 18 00 00 00 0f 00 00 00 00
> 00 00 00 00 00 00 00 00 00 20 00 00 00 fe 00 41
> 55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
> 00 42 31 34 30 48 41 4e 30 34 2e 30 20 0a 00 ed
>
> Signed-off-by: Jasper Korten <jja2000@gmail.com>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  drivers/gpu/drm/panel/panel-edp.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
> index 2b455369ed70..73cdc2d37ab7 100644
> --- a/drivers/gpu/drm/panel/panel-edp.c
> +++ b/drivers/gpu/drm/panel/panel-edp.c
> @@ -1986,6 +1986,7 @@ static const struct edp_panel_entry edp_panels[] = {
>         EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
>         EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
>         EDP_PANEL_ENTRY('A', 'U', 'O', 0x643d, &delay_200_500_e50, "B140HAN06.4"),
> +       EDP_PANEL_ENTRY('A', 'U', 'O', 0x65a9, &delay_200_500_e50, "B140HAN04.0"),

I'd assume you don't have a datasheet here and that the timings are a
bit of a guess. It's nice if you put that in the commit message, but I
won't block it. Ideally you could reply here and let me know if you
referred to a datasheet or just made a guess about the timings so if
the question ever comes up later we can find the conversation based on
the Link: tag...

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Pushed to drm-misc-next:

[1/3] drm/panel-edp: Add AUO B140HAN04.0 panel entry
      commit: 9125232bc2a5020710db1eadd21973757f740648

Re: [PATCH 1/3] drm/panel-edp: Add AUO B140HAN04.0 panel entry

[Luca Weiss]

On 13-10-2026 22:35, Doug Anderson wrote:
> Hi,
> 
> On Mon, Oct 12, 2026 at 11:11 AM Luca Weiss <luca.weiss@fairphone.com> wrote:
>>
>> From: Jasper Korten <jja2000@gmail.com>
>>
>> Add an entry for the B140HAN04.0 eDP panel. It is found on the Samsung
>> Galaxy Book2 Go.
>>
>> $ edid-decode /sys/class/drm/card0-eDP-1/edid
>>
>> 00 ff ff ff ff ff ff 00 06 af a9 65 00 00 00 00
>> 28 20 01 04 a5 1f 11 78 02 9b 85 92 56 59 90 29
>> 20 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
>> 01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10
>> 3e 00 35 ae 10 00 00 18 00 00 00 0f 00 00 00 00
>> 00 00 00 00 00 00 00 00 00 20 00 00 00 fe 00 41
>> 55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
>> 00 42 31 34 30 48 41 4e 30 34 2e 30 20 0a 00 ed
>>
>> Signed-off-by: Jasper Korten <jja2000@gmail.com>
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>>   drivers/gpu/drm/panel/panel-edp.c | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
>> index 2b455369ed70..73cdc2d37ab7 100644
>> --- a/drivers/gpu/drm/panel/panel-edp.c
>> +++ b/drivers/gpu/drm/panel/panel-edp.c
>> @@ -1986,6 +1986,7 @@ static const struct edp_panel_entry edp_panels[] = {
>>          EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
>>          EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
>>          EDP_PANEL_ENTRY('A', 'U', 'O', 0x643d, &delay_200_500_e50, "B140HAN06.4"),
>> +       EDP_PANEL_ENTRY('A', 'U', 'O', 0x65a9, &delay_200_500_e50, "B140HAN04.0"),
> 
> I'd assume you don't have a datasheet here and that the timings are a
> bit of a guess. It's nice if you put that in the commit message, but I
> won't block it. Ideally you could reply here and let me know if you
> referred to a datasheet or just made a guess about the timings so if
> the question ever comes up later we can find the conversation based on
> the Link: tag...

I assume this is just based on copy-paste from the lines around this. 
Jasper made this patch, but I assume he doesn't have any docs like that.

I briefly searched for the panel identifier some days ago and didn't 
directly stumble upon a datasheet.

Regards
Luca

> 
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> 
> Pushed to drm-misc-next:
> 
> [1/3] drm/panel-edp: Add AUO B140HAN04.0 panel entry
>        commit: 9125232bc2a5020710db1eadd21973757f740648

Re: [PATCH 1/3] drm/panel-edp: Add AUO B140HAN04.0 panel entry

[Jasper K]

Hi

Op di 13 okt 2026 om 22:35 schreef Doug Anderson <dianders@chromium.org>:
>
> Hi,
>
> On Mon, Oct 12, 2026 at 11:11 AM Luca Weiss <luca.weiss@fairphone.com> wrote:
> >
> > From: Jasper Korten <jja2000@gmail.com>
> >
> > Add an entry for the B140HAN04.0 eDP panel. It is found on the Samsung
> > Galaxy Book2 Go.
> >
> > $ edid-decode /sys/class/drm/card0-eDP-1/edid
> >
> > 00 ff ff ff ff ff ff 00 06 af a9 65 00 00 00 00
> > 28 20 01 04 a5 1f 11 78 02 9b 85 92 56 59 90 29
> > 20 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
> > 01 01 01 01 01 01 14 37 80 b8 70 38 24 40 10 10
> > 3e 00 35 ae 10 00 00 18 00 00 00 0f 00 00 00 00
> > 00 00 00 00 00 00 00 00 00 20 00 00 00 fe 00 41
> > 55 4f 0a 20 20 20 20 20 20 20 20 20 00 00 00 fe
> > 00 42 31 34 30 48 41 4e 30 34 2e 30 20 0a 00 ed
> >
> > Signed-off-by: Jasper Korten <jja2000@gmail.com>
> > Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> > ---
> >  drivers/gpu/drm/panel/panel-edp.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-edp.c b/drivers/gpu/drm/panel/panel-edp.c
> > index 2b455369ed70..73cdc2d37ab7 100644
> > --- a/drivers/gpu/drm/panel/panel-edp.c
> > +++ b/drivers/gpu/drm/panel/panel-edp.c
> > @@ -1986,6 +1986,7 @@ static const struct edp_panel_entry edp_panels[] = {
> >         EDP_PANEL_ENTRY('A', 'U', 'O', 0x635c, &delay_200_500_e50, "B116XAN06.3"),
> >         EDP_PANEL_ENTRY('A', 'U', 'O', 0x639c, &delay_200_500_e50, "B140HAK02.7"),
> >         EDP_PANEL_ENTRY('A', 'U', 'O', 0x643d, &delay_200_500_e50, "B140HAN06.4"),
> > +       EDP_PANEL_ENTRY('A', 'U', 'O', 0x65a9, &delay_200_500_e50, "B140HAN04.0"),
>
> I'd assume you don't have a datasheet here and that the timings are a
> bit of a guess. It's nice if you put that in the commit message, but I
> won't block it. Ideally you could reply here and let me know if you
> referred to a datasheet or just made a guess about the timings so if
> the question ever comes up later we can find the conversation based on
> the Link: tag...

The guess was based on the other entry of a panel with the exact same
name, but another ID (0x403d).
The link for when that got added can be found here:
https://patchwork.freedesktop.org/patch/msgid/20231107204611.3082200-4-hsinyi@chromium.org

There's some panel documentation around on panellook, but I'm not sure
if that matches the HW rev that's in these laptops,
nor if they actually contain the data I'd need for this panel entry.

This setup ended up working out, so that's why I left it like that.

Kindest Regards,

Jasper Korten

>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
>
> Pushed to drm-misc-next:
>
> [1/3] drm/panel-edp: Add AUO B140HAN04.0 panel entry
>       commit: 9125232bc2a5020710db1eadd21973757f740648

[PATCH 2/3] dt-bindings: arm: qcom: Add Samsung Galaxy Book2 Go

[Luca Weiss]

From: Luca Weiss <luca@lucaweiss.eu>

The Samsung Galaxy Book2 Go is a laptop with a Snapdragon 7c+ Gen 3 SoC
(SC7280).

It appears to exist in three variants:

  NP340XNAA-EXP:
    4GB RAM + 128GB UFS, WiFi-only (NP340XNA-KA1UK)

  NP345XNAA-EXP:
    4GB RAM + 128GB UFS, 5G (NP345XNA-KA1UK)
    8GB RAM + 256GB UFS, 5G (NP345XNA-KA2UK)

The internal code name is Hermes2-14.

Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index ff8a35df7862..5048e878b7ca 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -887,6 +887,11 @@ properties:
           - const: google,zombie-sku514
           - const: qcom,sc7280
 
+      - items:
+          - enum:
+              - samsung,galaxy-book2-go
+          - const: qcom,sc7280
+
       - items:
           - enum:
               - lenovo,flex-5g

-- 
2.56.0

Re: [PATCH 2/3] dt-bindings: arm: qcom: Add Samsung Galaxy Book2 Go

[Krzysztof Kozlowski]

On Mon, Oct 12, 2026 at 08:11:04PM +0200, Luca Weiss wrote:
> From: Luca Weiss <luca@lucaweiss.eu>
> 
> The Samsung Galaxy Book2 Go is a laptop with a Snapdragon 7c+ Gen 3 SoC
> (SC7280).
> 
> It appears to exist in three variants:
> 
>   NP340XNAA-EXP:
>     4GB RAM + 128GB UFS, WiFi-only (NP340XNA-KA1UK)
> 
>   NP345XNAA-EXP:
>     4GB RAM + 128GB UFS, 5G (NP345XNA-KA1UK)
>     8GB RAM + 256GB UFS, 5G (NP345XNA-KA2UK)
> 
> The internal code name is Hermes2-14.
> 
> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index ff8a35df7862..5048e878b7ca 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -887,6 +887,11 @@ properties:
>            - const: google,zombie-sku514
>            - const: qcom,sc7280

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof

[PATCH 3/3] arm64: dts: qcom: Add Samsung Galaxy Book2 Go

[Luca Weiss]

From: Jasper Korten <jja2000@gmail.com>

The Samsung Galaxy Book2 Go is a laptop with a Snapdragon 7c+ Gen 3 SoC
(SC7280).

Add initial functionality:
* Display (with backlight, GPU)
* Touchpad & keyboard (without Fn key mapping support)
* UFS storage
* SD card
* USB Type-A port
* Modem and mobile data
* WiFi & Bluetooth
* ADSP & CDSP bootup
* Battery fuel gauge
* Venus/Iris
* Lid switch
* RGB LED (Operating status LED)
* Webcam (USB UVC)

Notably missing:
* Speaker & microphone
* Charging
* USB Type-C ports (except when active at boot)
* DisplayPort on right-side USB-C port

Signed-off-by: Jasper Korten <jja2000@gmail.com>
Co-developed-by: Federico Amedeo Izzo <federico@izzo.pro>
Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../dts/qcom/sc7280-samsung-galaxy-book2-go.dts    | 643 +++++++++++++++++++++
 2 files changed, 644 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1c86e7e98f55..8e54d9ce5f3d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -287,6 +287,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-zombie-nvme-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-samsung-galaxy-book2-go.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
 sc8280xp-crd-el2-dtbs	:= sc8280xp-crd.dtb sc8280xp-el2.dtbo
diff --git a/arch/arm64/boot/dts/qcom/sc7280-samsung-galaxy-book2-go.dts b/arch/arm64/boot/dts/qcom/sc7280-samsung-galaxy-book2-go.dts
new file mode 100644
index 000000000000..fe1a1b01f67e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-samsung-galaxy-book2-go.dts
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Jasper Korten <jja2000@gmail.com>
+ * Copyright (c) 2026, Luca Weiss <luca@lucaweiss.eu>
+ */
+
+/dts-v1/;
+
+/* PM7250B is configured to use SID8/9 */
+#define PM7250B_SID 8
+#define PM7250B_SID1 9
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "kodiak.dtsi"
+#include "qcs6490-audioreach.dtsi"
+#include "pm7250b.dtsi"
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &wpss_mem;
+/delete-node/ &xbl_mem;
+
+/ {
+	model = "Samsung Galaxy Book2 Go";
+	compatible = "samsung,galaxy-book2-go", "qcom,sc7280";
+	chassis-type = "laptop";
+
+	aliases {
+		serial1 = &uart7;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			label = "Switch Lid";
+			gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+		};
+	};
+
+	pm8350c_pwm_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8350c_pwm 3 65535>;
+		enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pmic_lcd_bl_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		wpss_mem: wpss@84800000 {
+			reg = <0x0 0x84800000 0x0 0x1900000>;
+			no-map;
+		};
+
+		rmtfs_mem: rmtfs@a0800000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xa0800000 0x0 0x300000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+
+		ipa_fw_mem: ipa-fw@81800000 {
+			reg = <0x0 0x81800000 0x0 0x70000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vreg_l1b_0p8: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7b_2p9: ldo7 {
+			regulator-name = "vreg_l7b";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s1b_1p8: smps1 {
+			regulator-name = "vreg_s1b";
+			regulator-min-microvolt = <1872000>;
+			regulator-max-microvolt = <1872000>;
+		};
+
+		vreg_s7b_0p9: smps7 {
+			regulator-name = "vreg_s7b";
+			regulator-min-microvolt = <952000>;
+			regulator-max-microvolt = <952000>;
+		};
+
+		vreg_s8b_1p2: smps8 {
+			regulator-name = "vreg_s8b";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+		};
+
+		vreg_l10c_0p8: ldo10 {
+			regulator-name = "vreg_l10c";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_EDP_CLKREF_EN>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/sc7280/Samsung/galaxy-book2-go/qcdxkmsuc7280.mbn";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* SSTP0001 */
+	touchpad@40 {
+		compatible = "hid-over-i2c";
+		reg = <0x40>;
+		hid-descr-addr = <0x0e>;
+
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_l7c_3p0>;
+		vddl-supply = <&vreg_l18b_1p8>;
+
+		post-power-on-delay-ms = <2>;
+
+		pinctrl-0 = <&hid_touchpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* A96T396 Proximity @ 0x20 & 0x21 ? */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* LIS2DLC12 Accelerometer @ 0x1d ? */
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* A96T396 Proximity @ 0x20 ? */
+};
+
+&i2c10 {
+	status = "okay";
+
+	/* ? @ 0x09 */
+
+	battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+	};
+};
+
+&i2c12 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+
+	/* SSEC0001 */
+	keyboard@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+		hid-descr-addr = <0x20>;
+
+		interrupts-extended = <&tlmm 131 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&hid_keyboard_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* EC2 (?) @ 0x62 */
+};
+
+&ipa {
+	firmware-name = "qcom/sc7280/Samsung/galaxy-book2-go/ipa_fws.elf";
+
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_edp {
+	status = "okay";
+
+	aux-bus {
+		edp_panel: panel {
+			compatible = "edp-panel";
+
+			power-supply = <&vreg_edp_3p3>;
+			backlight = <&pm8350c_pwm_backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_edp_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_edp_phy {
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pm8350c_gpios {
+	pmic_lcd_bl_en: pmic-lcd-bl-en-state {
+		pins = "gpio7";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+
+	pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
+		pins = "gpio8";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+};
+
+&pm8350c_pwm {
+	pinctrl-0 = <&pmic_lcd_bl_pwm>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc7280/Samsung/galaxy-book2-go/qcadsp7280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/sc7280/Samsung/galaxy-book2-go/qccdsp7280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/sc7280/Samsung/galaxy-book2-go/qcmpss7280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_wpss {
+	firmware-name = "qcom/sc7280/Samsung/galaxy-book2-go/wpss.mbn";
+
+	status = "okay";
+};
+
+&sdc2_clk {
+	drive-strength = <16>;
+	bias-disable;
+};
+
+&sdc2_cmd {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdc2_data {
+	drive-strength = <10>;
+	bias-pull-up;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c_2p9>;
+	vqmmc-supply = <&vreg_l6c_2p9>;
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
+
+	status = "okay";
+};
+
+&tlmm {
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	hall_int_default: hall-int-state {
+		pins = "gpio35";
+		function = "gpio";
+		bias-disable;
+	};
+
+	hid_touchpad_default: hid-touchpad-default-state {
+		pins = "gpio61";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	bluetooth_enable_default: bluetooth-enable-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
+	sw_ctrl_default: sw-ctrl-default-state {
+		pins = "gpio86";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio96";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+	};
+
+	hid_keyboard_default: hid-keyboard-default-state {
+		pins = "gpio131";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	/delete-property/interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+
+		pinctrl-0 = <&bluetooth_enable_default>, <&sw_ctrl_default>;
+		pinctrl-names = "default";
+
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_l19b_1p8>;
+		vddaon-supply = <&vreg_s7b_0p9>;
+		vddbtcxmx-supply = <&vreg_s7b_0p9>;
+		vddrfacmn-supply = <&vreg_s7b_0p9>;
+		vddrfa0p8-supply = <&vreg_s7b_0p9>;
+		vddrfa1p7-supply = <&vreg_s1b_1p8>;
+		vddrfa1p2-supply = <&vreg_s8b_1p2>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p9>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda33-supply = <&vreg_l2b_3p0>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	qcom,hs-rise-fall-time-bp = <0>;
+	qcom,squelch-detector-bp = <(-2090)>;
+	qcom,hs-disconnect-bp = <1743>;
+	qcom,hs-amplitude-bp = <1780>;
+	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+	qcom,hs-output-impedance-micro-ohms = <2600000>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p8>;
+
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sc7280/Samsung/galaxy-book2-go/qcvss7280.mbn";
+
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+};

-- 
2.56.0

Re: [PATCH 3/3] arm64: dts: qcom: Add Samsung Galaxy Book2 Go

[Konrad Dybcio]

On 10/12/26 8:11 PM, Luca Weiss wrote:
> From: Jasper Korten <jja2000@gmail.com>

[...]

> Signed-off-by: Jasper Korten <jja2000@gmail.com>
> Co-developed-by: Federico Amedeo Izzo <federico@izzo.pro>
> Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
> Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>

Good to see the Lucas are in agreement ;)

[...]

> +&pm8350c_gpios {
> +	pmic_lcd_bl_en: pmic-lcd-bl-en-state {
> +		pins = "gpio7";
> +		function = "normal";
> +		bias-disable;
> +		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
> +		output-low;
> +		power-source = <0>;
> +	};
> +
> +	pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
> +		pins = "gpio8";
> +		function = "func1";
> +		bias-disable;
> +		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
> +		output-low;
> +		power-source = <0>;
> +	};

Drop the output-low, the consumers already take care of the state

[...]

> +&uart7 {
> +	/delete-property/interrupts;

Let's add a space after the '/'

> +	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
> +			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
> +
> +	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;

And let's wrap this line

[...]

> +&usb_1 {
> +	dr_mode = "host";

Does OTG not "just work"?

I'm assuming there's no pmic-glink on this device?

Konrad

Re: [PATCH 3/3] arm64: dts: qcom: Add Samsung Galaxy Book2 Go

[Luca Weiss]

On Tue Oct 13, 2026 at 12:10 PM CEST, Konrad Dybcio wrote:
> On 10/12/26 8:11 PM, Luca Weiss wrote:
>> From: Jasper Korten <jja2000@gmail.com>
>
> [...]
>
>> Signed-off-by: Jasper Korten <jja2000@gmail.com>
>> Co-developed-by: Federico Amedeo Izzo <federico@izzo.pro>
>> Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
>> Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
>> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>
> Good to see the Lucas are in agreement ;)

:)

>
> [...]
>
>> +&pm8350c_gpios {
>> +	pmic_lcd_bl_en: pmic-lcd-bl-en-state {
>> +		pins = "gpio7";
>> +		function = "normal";
>> +		bias-disable;
>> +		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
>> +		output-low;
>> +		power-source = <0>;
>> +	};
>> +
>> +	pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
>> +		pins = "gpio8";
>> +		function = "func1";
>> +		bias-disable;
>> +		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
>> +		output-low;
>> +		power-source = <0>;
>> +	};
>
> Drop the output-low, the consumers already take care of the state

For both enable and pwm?

>
> [...]
>
>> +&uart7 {
>> +	/delete-property/interrupts;
>
> Let's add a space after the '/'

Will do

>
>> +	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
>> +			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
>> +
>> +	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
>
> And let's wrap this line

Sure

>
> [...]
>
>> +&usb_1 {
>> +	dr_mode = "host";
>
> Does OTG not "just work"?

Is this a feature one would want on a laptop? On a phone for sure, but I
don't quite see the use case for the laptop to be a peripheral? But I
didn't try it, the USB basic setup was done by Jasper

>
> I'm assuming there's no pmic-glink on this device?

I'm not quite sure yet how the USB stuff works. For sure from
observation, USB-C only works when stuff was plugged-in at boot time
(UEFI?), and charger also only supplies any power (but not actually
charging) when plugged in at boot time.

Regards
Luca

>
> Konrad

Re: [PATCH 3/3] arm64: dts: qcom: Add Samsung Galaxy Book2 Go

[Dmitry Baryshkov]

On Tue, Oct 13, 2026 at 12:17:05PM +0200, Luca Weiss wrote:
> On Tue Oct 13, 2026 at 12:10 PM CEST, Konrad Dybcio wrote:
> > On 10/12/26 8:11 PM, Luca Weiss wrote:
> >> From: Jasper Korten <jja2000@gmail.com>
> >
> > [...]
> >
> >> Signed-off-by: Jasper Korten <jja2000@gmail.com>
> >> Co-developed-by: Federico Amedeo Izzo <federico@izzo.pro>
> >> Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
> >> Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
> >> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> >
> > Good to see the Lucas are in agreement ;)
> 
> :)
> 
> >
> > [...]
> >
> >> +&usb_1 {
> >> +	dr_mode = "host";
> >
> > Does OTG not "just work"?
> 
> Is this a feature one would want on a laptop? On a phone for sure, but I
> don't quite see the use case for the laptop to be a peripheral? But I
> didn't try it, the USB basic setup was done by Jasper

Why not? It's more or less the same set of usecases: USB gadget device
(which can be a networking gadget, serial, etc).

> 
> >
> > I'm assuming there's no pmic-glink on this device?
> 
> I'm not quite sure yet how the USB stuff works. For sure from
> observation, USB-C only works when stuff was plugged-in at boot time
> (UEFI?), and charger also only supplies any power (but not actually
> charging) when plugged in at boot time.

This means that something is not 100% correct, for example, missing EC
support.

-- 
With best wishes
Dmitry

Re: [PATCH 3/3] arm64: dts: qcom: Add Samsung Galaxy Book2 Go

[Luca Weiss]

On Wed Oct 14, 2026 at 3:28 AM CEST, Dmitry Baryshkov wrote:
> On Tue, Oct 13, 2026 at 12:17:05PM +0200, Luca Weiss wrote:
>> On Tue Oct 13, 2026 at 12:10 PM CEST, Konrad Dybcio wrote:
>> > On 10/12/26 8:11 PM, Luca Weiss wrote:
>> >> From: Jasper Korten <jja2000@gmail.com>
>> >
>> > [...]
>> >
>> >> Signed-off-by: Jasper Korten <jja2000@gmail.com>
>> >> Co-developed-by: Federico Amedeo Izzo <federico@izzo.pro>
>> >> Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro>
>> >> Co-developed-by: Luca Weiss <luca@lucaweiss.eu>
>> >> Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
>> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> >
>> > Good to see the Lucas are in agreement ;)
>> 
>> :)
>> 
>> >
>> > [...]
>> >
>> >> +&usb_1 {
>> >> +	dr_mode = "host";
>> >
>> > Does OTG not "just work"?
>> 
>> Is this a feature one would want on a laptop? On a phone for sure, but I
>> don't quite see the use case for the laptop to be a peripheral? But I
>> didn't try it, the USB basic setup was done by Jasper
>
> Why not? It's more or less the same set of usecases: USB gadget device
> (which can be a networking gadget, serial, etc).

I can give it a try!

>
>> 
>> >
>> > I'm assuming there's no pmic-glink on this device?
>> 
>> I'm not quite sure yet how the USB stuff works. For sure from
>> observation, USB-C only works when stuff was plugged-in at boot time
>> (UEFI?), and charger also only supplies any power (but not actually
>> charging) when plugged in at boot time.
>
> This means that something is not 100% correct, for example, missing EC
> support.

For sure some bits are missing. This laptop doesn't have an EC per-se,
it's got a "EMEC" - Emulated EC, where on Windows there's just a bunch
of drivers handling EC-like functionality.

So e.g. already for battery, we just talk with the sbs-battery directly.
I assume this will be the case for the other components on this laptop
as well.

Regards
Luca