From: Paolo Valente <paolo.valente@unimore.it>
To: Yu Kuai <yukuai1@huaweicloud.com>
Cc: Jan Kara <jack@suse.cz>,
cgroups@vger.kernel.org,
linux-block <linux-block@vger.kernel.org>,
Tejun Heo <tj@kernel.org>, Jens Axboe <axboe@kernel.dk>,
LKML <linux-kernel@vger.kernel.org>,
yi.zhang@huawei.com, "yukuai (C)" <yukuai3@huawei.com>
Subject: Re: [PATCH -next v10 3/4] block, bfq: refactor the counting of 'num_groups_with_pending_reqs'
Date: Tue, 6 Sep 2022 11:37:22 +0200 [thread overview]
Message-ID: <F758A356-EE6B-4B7B-95E2-6414616C77E4@unimore.it> (raw)
In-Reply-To: <e6b53794-f93f-92b2-1f45-35ae81a28a5c@huaweicloud.com>
> Il giorno 26 ago 2022, alle ore 04:34, Yu Kuai <yukuai1@huaweicloud.com> ha scritto:
>
> Hi, Paolo!
>
> 在 2022/08/25 22:59, Paolo Valente 写道:
>>> Il giorno 11 ago 2022, alle ore 03:19, Yu Kuai <yukuai1@huaweicloud.com <mailto:yukuai1@huaweicloud.com>> ha scritto:
>>>
>>> Hi, Paolo
>>>
>>> 在 2022/08/10 18:49, Paolo Valente 写道:
>>>>> Il giorno 27 lug 2022, alle ore 14:11, Yu Kuai <yukuai1@huaweicloud.com <mailto:yukuai1@huaweicloud.com>> ha scritto:
>>>>>
>>>>> Hi, Paolo
>>>>>
>>>> hi
>>>>> Are you still interested in this patchset?
>>>>>
>>>> Yes. Sorry for replying very late again.
>>>> Probably the last fix that you suggest is enough, but I'm a little bit
>>>> concerned that it may be a little hasty. In fact, before this fix, we
>>>> exchanged several messages, and I didn't seem to be very good at
>>>> convincing you about the need to keep into account also in-service
>>>> I/O. So, my question is: are you sure that now you have a
>>>
>>> I'm confused here, I'm pretty aware that in-service I/O(as said pending
>>> requests is the patchset) should be counted, as you suggested in v7, are
>>> you still thinking that the way in this patchset is problematic?
>>>
>>> I'll try to explain again that how to track is bfqq has pending pending
>>> requests, please let me know if you still think there are some problems:
>>>
>>> patch 1 support to track if bfqq has pending requests, it's
>>> done by setting the flag 'entity->in_groups_with_pending_reqs' when the
>>> first request is inserted to bfqq, and it's cleared when the last
>>> request is completed. specifically the flag is set in
>>> bfq_add_bfqq_busy() when 'bfqq->dispatched' if false, and it's cleared
>>> both in bfq_completed_request() and bfq_del_bfqq_busy() when
>>> 'bfqq->diapatched' is false.
>>>
>> This general description seems correct to me. Have you already sent a new version of your patchset?
>
> It's glad that we finially on the same page here.
>
Yep. Sorry for my chronicle delay.
> Please take a look at patch 1, which already impelement the above
> descriptions, it seems to me there is no need to send a new version
> for now. If you think there are still some other problems, please let
> me know.
>
Patch 1 seems ok to me. I seem to have only one pending comment on this patch (3/4) instead. Let me paste previous stuff here for your convenience:
>>
>> - /*
>> - * Next function is invoked last, because it causes bfqq to be
>> - * freed if the following holds: bfqq is not in service and
>> - * has no dispatched request. DO NOT use bfqq after the next
>> - * function invocation.
>> - */
> I would really love it if you leave this comment. I added it after
> suffering a lot for a nasty UAF. Of course the first sentence may
> need to be adjusted if the code that precedes it is to be removed.
> Same as above, if this patch is applied, this function will be gone.
yes, but this comment now must be moved forward.
Looking forward for a new complete version, for a new review. I'll do
my best to reply quicker.
Thanks,
Paolo
> Thanks,
> Kuai
>> Thanks,
>> Paolo
>>> Thanks,
>>> Kuai
>>>> clear/complete understanding of this non-trivial matter?
>>>> Consequently, are we sure that this last fix is most certainly all we
>>>> need? Of course, I will check on my own, but if you reassure me on
>>>> this point, I will feel more confident.
>>>> Thanks,
>>>> Paolo
>>>>> 在 2022/07/20 19:38, Yu Kuai 写道:
>>>>>> Hi
>>>>>>
>>>>>> 在 2022/07/20 19:24, Paolo VALENTE 写道:
>>>>>>>
>>>>>>>
>>>>>>>> Il giorno 12 lug 2022, alle ore 15:30, Yu Kuai <yukuai1@huaweicloud.com <mailto:yukuai1@huaweicloud.com> <mailto:yukuai1@huaweicloud.com>> ha scritto:
>>>>>>>>
>>>>>>>> Hi!
>>>>>>>>
>>>>>>>> I'm copying my reply with new mail address, because Paolo seems
>>>>>>>> didn't receive my reply.
>>>>>>>>
>>>>>>>> 在 2022/06/23 23:32, Paolo Valente 写道:
>>>>>>>>> Sorry for the delay.
>>>>>>>>>> Il giorno 10 giu 2022, alle ore 04:17, Yu Kuai <yukuai3@huawei.com <mailto:yukuai3@huawei.com> <mailto:yukuai3@huawei.com>> ha scritto:
>>>>>>>>>>
>>>>>>>>>> Currently, bfq can't handle sync io concurrently as long as they
>>>>>>>>>> are not issued from root group. This is because
>>>>>>>>>> 'bfqd->num_groups_with_pending_reqs > 0' is always true in
>>>>>>>>>> bfq_asymmetric_scenario().
>>>>>>>>>>
>>>>>>>>>> The way that bfqg is counted into 'num_groups_with_pending_reqs':
>>>>>>>>>>
>>>>>>>>>> Before this patch:
>>>>>>>>>> 1) root group will never be counted.
>>>>>>>>>> 2) Count if bfqg or it's child bfqgs have pending requests.
>>>>>>>>>> 3) Don't count if bfqg and it's child bfqgs complete all the requests.
>>>>>>>>>>
>>>>>>>>>> After this patch:
>>>>>>>>>> 1) root group is counted.
>>>>>>>>>> 2) Count if bfqg have pending requests.
>>>>>>>>>> 3) Don't count if bfqg complete all the requests.
>>>>>>>>>>
>>>>>>>>>> With this change, the occasion that only one group is activated can be
>>>>>>>>>> detected, and next patch will support concurrent sync io in the
>>>>>>>>>> occasion.
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Yu Kuai <yukuai3@huawei.com <mailto:yukuai3@huawei.com> <mailto:yukuai3@huawei.com>>
>>>>>>>>>> Reviewed-by: Jan Kara <jack@suse.cz <mailto:jack@suse.cz> <mailto:jack@suse.cz>>
>>>>>>>>>> ---
>>>>>>>>>> block/bfq-iosched.c | 42 ------------------------------------------
>>>>>>>>>> block/bfq-iosched.h | 18 +++++++++---------
>>>>>>>>>> block/bfq-wf2q.c | 19 ++++---------------
>>>>>>>>>> 3 files changed, 13 insertions(+), 66 deletions(-)
>>>>>>>>>>
>>>>>>>>>> diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
>>>>>>>>>> index 0ec21018daba..03b04892440c 100644
>>>>>>>>>> --- a/block/bfq-iosched.c
>>>>>>>>>> +++ b/block/bfq-iosched.c
>>>>>>>>>> @@ -970,48 +970,6 @@ void __bfq_weights_tree_remove(struct bfq_data *bfqd,
>>>>>>>>>> void bfq_weights_tree_remove(struct bfq_data *bfqd,
>>>>>>>>>> struct bfq_queue *bfqq)
>>>>>>>>>> {
>>>>>>>>>> -struct bfq_entity *entity = bfqq->entity.parent;
>>>>>>>>>> -
>>>>>>>>>> -for_each_entity(entity) {
>>>>>>>>>> -struct bfq_sched_data *sd = entity->my_sched_data;
>>>>>>>>>> -
>>>>>>>>>> -if (sd->next_in_service || sd->in_service_entity) {
>>>>>>>>>> -/*
>>>>>>>>>> -* entity is still active, because either
>>>>>>>>>> -* next_in_service or in_service_entity is not
>>>>>>>>>> -* NULL (see the comments on the definition of
>>>>>>>>>> -* next_in_service for details on why
>>>>>>>>>> -* in_service_entity must be checked too).
>>>>>>>>>> -*
>>>>>>>>>> -* As a consequence, its parent entities are
>>>>>>>>>> -* active as well, and thus this loop must
>>>>>>>>>> -* stop here.
>>>>>>>>>> -*/
>>>>>>>>>> -break;
>>>>>>>>>> -}
>>>>>>>>>> -
>>>>>>>>>> -/*
>>>>>>>>>> -* The decrement of num_groups_with_pending_reqs is
>>>>>>>>>> -* not performed immediately upon the deactivation of
>>>>>>>>>> -* entity, but it is delayed to when it also happens
>>>>>>>>>> -* that the first leaf descendant bfqq of entity gets
>>>>>>>>>> -* all its pending requests completed. The following
>>>>>>>>>> -* instructions perform this delayed decrement, if
>>>>>>>>>> -* needed. See the comments on
>>>>>>>>>> -* num_groups_with_pending_reqs for details.
>>>>>>>>>> -*/
>>>>>>>>>> -if (entity->in_groups_with_pending_reqs) {
>>>>>>>>>> -entity->in_groups_with_pending_reqs = false;
>>>>>>>>>> -bfqd->num_groups_with_pending_reqs--;
>>>>>>>>>> -}
>>>>>>>>>> -}
>>>>>>>>> With this part removed, I'm missing how you handle the following
>>>>>>>>> sequence of events:
>>>>>>>>> 1. a queue Q becomes non busy but still has dispatched requests, so
>>>>>>>>> it must not be removed from the counter of queues with pending reqs
>>>>>>>>> yet
>>>>>>>>> 2. the last request of Q is completed with Q being still idle (non
>>>>>>>>> busy). At this point Q must be removed from the counter. It seems to
>>>>>>>>> me that this case is not handled any longer
>>>>>>>> Hi, Paolo
>>>>>>>>
>>>>>>>> 1) At first, patch 1 support to track if bfqq has pending requests, it's
>>>>>>>> done by setting the flag 'entity->in_groups_with_pending_reqs' when the
>>>>>>>> first request is inserted to bfqq, and it's cleared when the last
>>>>>>>> request is completed(based on weights_tree insertion and removal).
>>>>>>>>
>>>>>>>
>>>>>>> In patch 1 I don't see the flag cleared for the request-completion event :(
>>>>>>>
>>>>>>> The piece of code involved is this:
>>>>>>>
>>>>>>> static void bfq_completed_request(struct bfq_queue *bfqq, struct bfq_data *bfqd)
>>>>>>> {
>>>>>>> u64 now_ns;
>>>>>>> u32 delta_us;
>>>>>>>
>>>>>>> bfq_update_hw_tag(bfqd);
>>>>>>>
>>>>>>> bfqd->rq_in_driver[bfqq->actuator_idx]--;
>>>>>>> bfqd->tot_rq_in_driver--;
>>>>>>> bfqq->dispatched--;
>>>>>>>
>>>>>>> if (!bfqq->dispatched && !bfq_bfqq_busy(bfqq)) {
>>>>>>> /*
>>>>>>> * Set budget_timeout (which we overload to store the
>>>>>>> * time at which the queue remains with no backlog and
>>>>>>> * no outstanding request; used by the weight-raising
>>>>>>> * mechanism).
>>>>>>> */
>>>>>>> bfqq->budget_timeout = jiffies;
>>>>>>>
>>>>>>> bfq_weights_tree_remove(bfqd, bfqq);
>>>>>>> }
>>>>>>> ...
>>>>>>>
>>>>>>> Am I missing something?
>>>>>>
>>>>>> I add a new api bfq_del_bfqq_in_groups_with_pending_reqs() in patch 1
>>>>>> to clear the flag, and it's called both from bfq_del_bfqq_busy() and
>>>>>> bfq_completed_request(). I think you may miss the later:
>>>>>>
>>>>>> diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
>>>>>> index 0d46cb728bbf..0ec21018daba 100644
>>>>>> --- a/block/bfq-iosched.c
>>>>>> +++ b/block/bfq-iosched.c
>>>>>> @@ -6263,6 +6263,7 @@ static void bfq_completed_request(struct bfq_queue *bfqq, struct bfq_data *bfqd)
>>>>>> */
>>>>>> bfqq->budget_timeout = jiffies;
>>>>>>
>>>>>> + bfq_del_bfqq_in_groups_with_pending_reqs(bfqq);
>>>>>> bfq_weights_tree_remove(bfqd, bfqq);
>>>>>> }
>>>>>>
>>>>>> Thanks,
>>>>>> Kuai
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Paolo
>>>>>
>>>> .
>
next prev parent reply other threads:[~2022-09-06 9:37 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-10 2:16 [PATCH -next v10 0/4] support concurrent sync io for bfq on a specail occasion Yu Kuai
2022-06-10 2:16 ` [PATCH -next v10 1/4] block, bfq: support to track if bfqq has pending requests Yu Kuai
2022-06-10 2:16 ` [PATCH -next v10 2/4] block, bfq: record how many queues have " Yu Kuai
2022-06-10 2:17 ` [PATCH -next v10 3/4] block, bfq: refactor the counting of 'num_groups_with_pending_reqs' Yu Kuai
2022-06-23 15:32 ` Paolo Valente
2022-06-24 1:26 ` Yu Kuai
2022-06-25 8:10 ` Yu Kuai
2022-07-12 13:30 ` Yu Kuai
[not found] ` <C2CF100A-9A7C-4300-9A70-1295BC939C66@unimore.it>
2022-07-20 11:38 ` Yu Kuai
2022-07-27 12:11 ` Yu Kuai
2022-08-05 11:20 ` Yu Kuai
2022-08-10 10:49 ` Paolo Valente
2022-08-11 1:19 ` Yu Kuai
2022-08-25 12:14 ` Yu Kuai
[not found] ` <D89DCF20-27D8-4F8F-B8B0-FD193FC4F18D@unimore.it>
2022-08-26 2:34 ` Yu Kuai
2022-09-06 9:37 ` Paolo Valente [this message]
2022-09-07 1:16 ` Yu Kuai
2022-09-14 1:55 ` Yu Kuai
2022-09-14 7:50 ` Paolo VALENTE
2022-09-14 8:15 ` Yu Kuai
2022-09-14 9:00 ` Jan Kara
2022-09-15 1:18 ` Yu Kuai
2022-06-10 2:17 ` [PATCH -next v10 4/4] block, bfq: do not idle if only one group is activated Yu Kuai
2022-06-17 1:12 ` [PATCH -next v10 0/4] support concurrent sync io for bfq on a specail occasion Yu Kuai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=F758A356-EE6B-4B7B-95E2-6414616C77E4@unimore.it \
--to=paolo.valente@unimore.it \
--cc=axboe@kernel.dk \
--cc=cgroups@vger.kernel.org \
--cc=jack@suse.cz \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=yi.zhang@huawei.com \
--cc=yukuai1@huaweicloud.com \
--cc=yukuai3@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®