[PATCH RFC] remoteproc: qcom: wcnss: Adjust voltage requirements for Pronto v2

[PATCH RFC] remoteproc: qcom: wcnss: Adjust voltage requirements for Pronto v2

[Konrad Dybcio]

This is required for MSM8974 devices that cannot afford to push
the regulators further.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/remoteproc/qcom_wcnss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index e2573f79a137..71480be545e4 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -124,7 +124,7 @@ static const struct wcnss_data pronto_v2_data = {
 	.spare_offset = 0x1088,
 
 	.vregs = (struct wcnss_vreg_info[]) {
-		{ "vddmx", 1287500, 1287500, 0 },
+		{ "vddmx", 950000, 1150000, 0 },
 		{ "vddcx", .super_turbo = true },
 		{ "vddpx", 1800000, 1800000, 0 },
 	},
-- 
2.29.2

Re: [PATCH RFC] remoteproc: qcom: wcnss: Adjust voltage requirements for Pronto v2

[Stephan Gerhold]

Hi Konrad,

On Sat, Dec 26, 2020 at 03:11:00PM +0100, Konrad Dybcio wrote:
> This is required for MSM8974 devices that cannot afford to push
> the regulators further.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> ---
>  drivers/remoteproc/qcom_wcnss.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
> index e2573f79a137..71480be545e4 100644
> --- a/drivers/remoteproc/qcom_wcnss.c
> +++ b/drivers/remoteproc/qcom_wcnss.c
> @@ -124,7 +124,7 @@ static const struct wcnss_data pronto_v2_data = {
>  	.spare_offset = 0x1088,
>  
>  	.vregs = (struct wcnss_vreg_info[]) {
> -		{ "vddmx", 1287500, 1287500, 0 },
> +		{ "vddmx", 950000, 1150000, 0 },
>  		{ "vddcx", .super_turbo = true },
>  		{ "vddpx", 1800000, 1800000, 0 },
>  	},

Correct me if I'm wrong but with this change pronto_v2_data looks
exactly like pronto_v1_data (qcom,pronto-v1-pil).
Can you just change the compatible in qcom-msm8974.dtsi?

Also, if possible MSM8974 should be also moved to corner votes via rpmpd,
like in https://lore.kernel.org/linux-arm-msm/20200916104135.25085-1-stephan@gerhold.net/
Then the actual voltages don't matter anymore (all we need to do here is
to temporarily scale the power domain to maximum so WCNSS can boot up).

Thanks,
Stephan