[PATCH AUTOSEL 6.10 001/197] wifi: ath9k: fix possible integer overflow in ath9k_get_et_stats()

[PATCH AUTOSEL 6.10 001/197] wifi: ath9k: fix possible integer overflow in ath9k_get_et_stats()

[Sasha Levin]

From: Dmitry Kandybka <d.kandybka@gmail.com>

[ Upstream commit 3f66f26703093886db81f0610b97a6794511917c ]

In 'ath9k_get_et_stats()', promote TX stats counters to 'u64'
to avoid possible integer overflow. Compile tested only.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240725111743.14422-1-d.kandybka@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/debug.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index d84e3ee7b5d90..886a102e5b025 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1325,11 +1325,11 @@ void ath9k_get_et_stats(struct ieee80211_hw *hw,
 	struct ath_softc *sc = hw->priv;
 	int i = 0;
 
-	data[i++] = (sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_pkts_all +
+	data[i++] = ((u64)sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_pkts_all +
 		     sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BK)].tx_pkts_all +
 		     sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VI)].tx_pkts_all +
 		     sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VO)].tx_pkts_all);
-	data[i++] = (sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_bytes_all +
+	data[i++] = ((u64)sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BE)].tx_bytes_all +
 		     sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_BK)].tx_bytes_all +
 		     sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VI)].tx_bytes_all +
 		     sc->debug.stats.txstats[PR_QNUM(IEEE80211_AC_VO)].tx_bytes_all);
-- 
2.43.0

[PATCH AUTOSEL 6.10 002/197] wifi: rtw89: avoid to add interface to list twice when SER

[Sasha Levin]

From: Chih-Kang Chang <gary.chang@realtek.com>

[ Upstream commit 7dd5d2514a8ea58f12096e888b0bd050d7eae20a ]

If SER L2 occurs during the WoWLAN resume flow, the add interface flow
is triggered by ieee80211_reconfig(). However, due to
rtw89_wow_resume() return failure, it will cause the add interface flow
to be executed again, resulting in a double add list and causing a kernel
panic. Therefore, we have added a check to prevent double adding of the
list.

list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:37!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G        W  O       6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7
Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021
Workqueue: events_freezable ieee80211_restart_work [mac80211]
RIP: 0010:__list_add_valid_or_report+0x5e/0xb0
Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12
RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246
RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900
RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001
RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0
R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060
R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010
FS:  0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0
Call Trace:
 <TASK>
 ? __die_body+0x1f/0x70
 ? die+0x3d/0x60
 ? do_trap+0xa4/0x110
 ? __list_add_valid_or_report+0x5e/0xb0
 ? do_error_trap+0x6d/0x90
 ? __list_add_valid_or_report+0x5e/0xb0
 ? handle_invalid_op+0x30/0x40
 ? __list_add_valid_or_report+0x5e/0xb0
 ? exc_invalid_op+0x3c/0x50
 ? asm_exc_invalid_op+0x16/0x20
 ? __list_add_valid_or_report+0x5e/0xb0
 rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f]
 drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
 ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
 ? finish_wait+0x3e/0x90
 ? synchronize_rcu_expedited+0x174/0x260
 ? sync_rcu_exp_done_unlocked+0x50/0x50
 ? wake_bit_function+0x40/0x40
 ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc]
 process_scheduled_works+0x1e5/0x480
 worker_thread+0xea/0x1e0
 kthread+0xdb/0x110
 ? move_linked_works+0x90/0x90
 ? kthread_associate_blkcg+0xa0/0xa0
 ret_from_fork+0x3b/0x50
 ? kthread_associate_blkcg+0xa0/0xa0
 ret_from_fork_asm+0x11/0x20
 </TASK>
Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev
gsmi: Log Shutdown Reason 0x03
---[ end trace 0000000000000000 ]---

Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240731070506.46100-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw89/mac80211.c |  4 +++-
 drivers/net/wireless/realtek/rtw89/util.h     | 18 ++++++++++++++++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index 1ec97250e88e5..4fae0bd566f6a 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -126,7 +126,9 @@ static int rtw89_ops_add_interface(struct ieee80211_hw *hw,
 	rtwvif->rtwdev = rtwdev;
 	rtwvif->roc.state = RTW89_ROC_IDLE;
 	rtwvif->offchan = false;
-	list_add_tail(&rtwvif->list, &rtwdev->rtwvifs_list);
+	if (!rtw89_rtwvif_in_list(rtwdev, rtwvif))
+		list_add_tail(&rtwvif->list, &rtwdev->rtwvifs_list);
+
 	INIT_WORK(&rtwvif->update_beacon_work, rtw89_core_update_beacon_work);
 	INIT_DELAYED_WORK(&rtwvif->roc.roc_work, rtw89_roc_work);
 	rtw89_leave_ps_mode(rtwdev);
diff --git a/drivers/net/wireless/realtek/rtw89/util.h b/drivers/net/wireless/realtek/rtw89/util.h
index e2ed4565025dd..d4ee9078a4f48 100644
--- a/drivers/net/wireless/realtek/rtw89/util.h
+++ b/drivers/net/wireless/realtek/rtw89/util.h
@@ -14,6 +14,24 @@
 #define rtw89_for_each_rtwvif(rtwdev, rtwvif)				       \
 	list_for_each_entry(rtwvif, &(rtwdev)->rtwvifs_list, list)
 
+/* Before adding rtwvif to list, we need to check if it already exist, beacase
+ * in some case such as SER L2 happen during WoWLAN flow, calling reconfig
+ * twice cause the list to be added twice.
+ */
+static inline bool rtw89_rtwvif_in_list(struct rtw89_dev *rtwdev,
+					struct rtw89_vif *new)
+{
+	struct rtw89_vif *rtwvif;
+
+	lockdep_assert_held(&rtwdev->mutex);
+
+	rtw89_for_each_rtwvif(rtwdev, rtwvif)
+		if (rtwvif == new)
+			return true;
+
+	return false;
+}
+
 /* The result of negative dividend and positive divisor is undefined, but it
  * should be one case of round-down or round-up. So, make it round-down if the
  * result is round-up.
-- 
2.43.0

[PATCH AUTOSEL 6.10 003/197] wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 94745807f3ebd379f23865e6dab196f220664179 ]

Syzbot points out that skb_trim() has a sanity check on the existing length of
the skb, which can be uninitialised in some error paths. The intent here is
clearly just to reset the length to zero before resubmitting, so switch to
calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length()
already contains a call to skb_reset_tail_pointer(), so remove the redundant
call.

The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar
usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it.

Reported-by: syzbot+98afa303be379af6cdb2@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240812142447.12328-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/hif_usb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 0c7841f952287..a3733c9b484e4 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -716,8 +716,7 @@ static void ath9k_hif_usb_rx_cb(struct urb *urb)
 	}
 
 resubmit:
-	skb_reset_tail_pointer(skb);
-	skb_trim(skb, 0);
+	__skb_set_length(skb, 0);
 
 	usb_anchor_urb(urb, &hif_dev->rx_submitted);
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
@@ -754,8 +753,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 	case -ESHUTDOWN:
 		goto free_skb;
 	default:
-		skb_reset_tail_pointer(skb);
-		skb_trim(skb, 0);
+		__skb_set_length(skb, 0);
 
 		goto resubmit;
 	}
-- 
2.43.0

[PATCH AUTOSEL 6.10 004/197] crypto: x86/sha256 - Add parentheses around macros' single arguments

[Sasha Levin]

From: Fangrui Song <maskray@google.com>

[ Upstream commit 3363c460ef726ba693704dbcd73b7e7214ccc788 ]

The macros FOUR_ROUNDS_AND_SCHED and DO_4ROUNDS rely on an
unexpected/undocumented behavior of the GNU assembler, which might
change in the future
(https://sourceware.org/bugzilla/show_bug.cgi?id=32073).

    M (1) (2) // 1 arg !? Future: 2 args
    M 1 + 2   // 1 arg !? Future: 3 args

    M 1 2     // 2 args

Add parentheses around the single arguments to support future GNU
assembler and LLVM integrated assembler (when the IsOperator hack from
the following link is dropped).

Link: https://github.com/llvm/llvm-project/commit/055006475e22014b28a070db1bff41ca15f322f0
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/crypto/sha256-avx2-asm.S | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/x86/crypto/sha256-avx2-asm.S b/arch/x86/crypto/sha256-avx2-asm.S
index 0ffb072be9561..0bbec1c75cd0b 100644
--- a/arch/x86/crypto/sha256-avx2-asm.S
+++ b/arch/x86/crypto/sha256-avx2-asm.S
@@ -592,22 +592,22 @@ SYM_TYPED_FUNC_START(sha256_transform_rorx)
 	leaq	K256+0*32(%rip), INP		## reuse INP as scratch reg
 	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 0*32+_XFER(%rsp, SRND)
-	FOUR_ROUNDS_AND_SCHED	_XFER + 0*32
+	FOUR_ROUNDS_AND_SCHED	(_XFER + 0*32)
 
 	leaq	K256+1*32(%rip), INP
 	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 1*32+_XFER(%rsp, SRND)
-	FOUR_ROUNDS_AND_SCHED	_XFER + 1*32
+	FOUR_ROUNDS_AND_SCHED	(_XFER + 1*32)
 
 	leaq	K256+2*32(%rip), INP
 	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 2*32+_XFER(%rsp, SRND)
-	FOUR_ROUNDS_AND_SCHED	_XFER + 2*32
+	FOUR_ROUNDS_AND_SCHED	(_XFER + 2*32)
 
 	leaq	K256+3*32(%rip), INP
 	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 3*32+_XFER(%rsp, SRND)
-	FOUR_ROUNDS_AND_SCHED	_XFER + 3*32
+	FOUR_ROUNDS_AND_SCHED	(_XFER + 3*32)
 
 	add	$4*32, SRND
 	cmp	$3*4*32, SRND
@@ -618,12 +618,12 @@ SYM_TYPED_FUNC_START(sha256_transform_rorx)
 	leaq	K256+0*32(%rip), INP
 	vpaddd	(INP, SRND), X0, XFER
 	vmovdqa XFER, 0*32+_XFER(%rsp, SRND)
-	DO_4ROUNDS	_XFER + 0*32
+	DO_4ROUNDS	(_XFER + 0*32)
 
 	leaq	K256+1*32(%rip), INP
 	vpaddd	(INP, SRND), X1, XFER
 	vmovdqa XFER, 1*32+_XFER(%rsp, SRND)
-	DO_4ROUNDS	_XFER + 1*32
+	DO_4ROUNDS	(_XFER + 1*32)
 	add	$2*32, SRND
 
 	vmovdqa	X2, X0
@@ -651,8 +651,8 @@ SYM_TYPED_FUNC_START(sha256_transform_rorx)
 	xor	SRND, SRND
 .align 16
 .Lloop3:
-	DO_4ROUNDS	 _XFER + 0*32 + 16
-	DO_4ROUNDS	 _XFER + 1*32 + 16
+	DO_4ROUNDS	(_XFER + 0*32 + 16)
+	DO_4ROUNDS	(_XFER + 1*32 + 16)
 	add	$2*32, SRND
 	cmp	$4*4*32, SRND
 	jb	.Lloop3
-- 
2.43.0

[PATCH AUTOSEL 6.10 005/197] crypto: octeontx - Fix authenc setkey

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 311eea7e37c4c0b44b557d0c100860a03b4eab65 ]

Use the generic crypto_authenc_extractkeys helper instead of custom
parsing code that is slightly broken.  Also fix a number of memory
leaks by moving memory allocation from setkey to init_tfm (setkey
can be called multiple times over the life of a tfm).

Finally accept all hash key lengths by running the digest over
extra-long keys.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../crypto/marvell/octeontx/otx_cptvf_algs.c  | 261 +++++++-----------
 1 file changed, 93 insertions(+), 168 deletions(-)

diff --git a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
index 3c5d577d8f0d5..0a1b85ad0057f 100644
--- a/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
+++ b/drivers/crypto/marvell/octeontx/otx_cptvf_algs.c
@@ -17,7 +17,6 @@
 #include <crypto/sha2.h>
 #include <crypto/xts.h>
 #include <crypto/scatterwalk.h>
-#include <linux/rtnetlink.h>
 #include <linux/sort.h>
 #include <linux/module.h>
 #include "otx_cptvf.h"
@@ -66,6 +65,8 @@ static struct cpt_device_table ae_devices = {
 	.count = ATOMIC_INIT(0)
 };
 
+static struct otx_cpt_sdesc *alloc_sdesc(struct crypto_shash *alg);
+
 static inline int get_se_device(struct pci_dev **pdev, int *cpu_num)
 {
 	int count, ret = 0;
@@ -509,44 +510,61 @@ static int cpt_aead_init(struct crypto_aead *tfm, u8 cipher_type, u8 mac_type)
 	ctx->cipher_type = cipher_type;
 	ctx->mac_type = mac_type;
 
+	switch (ctx->mac_type) {
+	case OTX_CPT_SHA1:
+		ctx->hashalg = crypto_alloc_shash("sha1", 0, 0);
+		break;
+
+	case OTX_CPT_SHA256:
+		ctx->hashalg = crypto_alloc_shash("sha256", 0, 0);
+		break;
+
+	case OTX_CPT_SHA384:
+		ctx->hashalg = crypto_alloc_shash("sha384", 0, 0);
+		break;
+
+	case OTX_CPT_SHA512:
+		ctx->hashalg = crypto_alloc_shash("sha512", 0, 0);
+		break;
+	}
+
+	if (IS_ERR(ctx->hashalg))
+		return PTR_ERR(ctx->hashalg);
+
+	crypto_aead_set_reqsize_dma(tfm, sizeof(struct otx_cpt_req_ctx));
+
+	if (!ctx->hashalg)
+		return 0;
+
 	/*
 	 * When selected cipher is NULL we use HMAC opcode instead of
 	 * FLEXICRYPTO opcode therefore we don't need to use HASH algorithms
 	 * for calculating ipad and opad
 	 */
 	if (ctx->cipher_type != OTX_CPT_CIPHER_NULL) {
-		switch (ctx->mac_type) {
-		case OTX_CPT_SHA1:
-			ctx->hashalg = crypto_alloc_shash("sha1", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
-
-		case OTX_CPT_SHA256:
-			ctx->hashalg = crypto_alloc_shash("sha256", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
+		int ss = crypto_shash_statesize(ctx->hashalg);
 
-		case OTX_CPT_SHA384:
-			ctx->hashalg = crypto_alloc_shash("sha384", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
+		ctx->ipad = kzalloc(ss, GFP_KERNEL);
+		if (!ctx->ipad) {
+			crypto_free_shash(ctx->hashalg);
+			return -ENOMEM;
+		}
 
-		case OTX_CPT_SHA512:
-			ctx->hashalg = crypto_alloc_shash("sha512", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
+		ctx->opad = kzalloc(ss, GFP_KERNEL);
+		if (!ctx->opad) {
+			kfree(ctx->ipad);
+			crypto_free_shash(ctx->hashalg);
+			return -ENOMEM;
 		}
 	}
 
-	crypto_aead_set_reqsize_dma(tfm, sizeof(struct otx_cpt_req_ctx));
+	ctx->sdesc = alloc_sdesc(ctx->hashalg);
+	if (!ctx->sdesc) {
+		kfree(ctx->opad);
+		kfree(ctx->ipad);
+		crypto_free_shash(ctx->hashalg);
+		return -ENOMEM;
+	}
 
 	return 0;
 }
@@ -602,8 +620,7 @@ static void otx_cpt_aead_exit(struct crypto_aead *tfm)
 
 	kfree(ctx->ipad);
 	kfree(ctx->opad);
-	if (ctx->hashalg)
-		crypto_free_shash(ctx->hashalg);
+	crypto_free_shash(ctx->hashalg);
 	kfree(ctx->sdesc);
 }
 
@@ -699,7 +716,7 @@ static inline void swap_data64(void *buf, u32 len)
 		*dst = cpu_to_be64p(src);
 }
 
-static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)
+static int swap_pad(u8 mac_type, u8 *pad)
 {
 	struct sha512_state *sha512;
 	struct sha256_state *sha256;
@@ -707,22 +724,19 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)
 
 	switch (mac_type) {
 	case OTX_CPT_SHA1:
-		sha1 = (struct sha1_state *) in_pad;
+		sha1 = (struct sha1_state *)pad;
 		swap_data32(sha1->state, SHA1_DIGEST_SIZE);
-		memcpy(out_pad, &sha1->state, SHA1_DIGEST_SIZE);
 		break;
 
 	case OTX_CPT_SHA256:
-		sha256 = (struct sha256_state *) in_pad;
+		sha256 = (struct sha256_state *)pad;
 		swap_data32(sha256->state, SHA256_DIGEST_SIZE);
-		memcpy(out_pad, &sha256->state, SHA256_DIGEST_SIZE);
 		break;
 
 	case OTX_CPT_SHA384:
 	case OTX_CPT_SHA512:
-		sha512 = (struct sha512_state *) in_pad;
+		sha512 = (struct sha512_state *)pad;
 		swap_data64(sha512->state, SHA512_DIGEST_SIZE);
-		memcpy(out_pad, &sha512->state, SHA512_DIGEST_SIZE);
 		break;
 
 	default:
@@ -732,55 +746,53 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)
 	return 0;
 }
 
-static int aead_hmac_init(struct crypto_aead *cipher)
+static int aead_hmac_init(struct crypto_aead *cipher,
+			  struct crypto_authenc_keys *keys)
 {
 	struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher);
-	int state_size = crypto_shash_statesize(ctx->hashalg);
 	int ds = crypto_shash_digestsize(ctx->hashalg);
 	int bs = crypto_shash_blocksize(ctx->hashalg);
-	int authkeylen = ctx->auth_key_len;
+	int authkeylen = keys->authkeylen;
 	u8 *ipad = NULL, *opad = NULL;
-	int ret = 0, icount = 0;
+	int icount = 0;
+	int ret;
 
-	ctx->sdesc = alloc_sdesc(ctx->hashalg);
-	if (!ctx->sdesc)
-		return -ENOMEM;
+	if (authkeylen > bs) {
+		ret = crypto_shash_digest(&ctx->sdesc->shash, keys->authkey,
+					  authkeylen, ctx->key);
+		if (ret)
+			return ret;
+		authkeylen = ds;
+	} else
+		memcpy(ctx->key, keys->authkey, authkeylen);
 
-	ctx->ipad = kzalloc(bs, GFP_KERNEL);
-	if (!ctx->ipad) {
-		ret = -ENOMEM;
-		goto calc_fail;
-	}
+	ctx->enc_key_len = keys->enckeylen;
+	ctx->auth_key_len = authkeylen;
 
-	ctx->opad = kzalloc(bs, GFP_KERNEL);
-	if (!ctx->opad) {
-		ret = -ENOMEM;
-		goto calc_fail;
-	}
+	if (ctx->cipher_type == OTX_CPT_CIPHER_NULL)
+		return keys->enckeylen ? -EINVAL : 0;
 
-	ipad = kzalloc(state_size, GFP_KERNEL);
-	if (!ipad) {
-		ret = -ENOMEM;
-		goto calc_fail;
+	switch (keys->enckeylen) {
+	case AES_KEYSIZE_128:
+		ctx->key_type = OTX_CPT_AES_128_BIT;
+		break;
+	case AES_KEYSIZE_192:
+		ctx->key_type = OTX_CPT_AES_192_BIT;
+		break;
+	case AES_KEYSIZE_256:
+		ctx->key_type = OTX_CPT_AES_256_BIT;
+		break;
+	default:
+		/* Invalid key length */
+		return -EINVAL;
 	}
 
-	opad = kzalloc(state_size, GFP_KERNEL);
-	if (!opad) {
-		ret = -ENOMEM;
-		goto calc_fail;
-	}
+	memcpy(ctx->key + authkeylen, keys->enckey, keys->enckeylen);
 
-	if (authkeylen > bs) {
-		ret = crypto_shash_digest(&ctx->sdesc->shash, ctx->key,
-					  authkeylen, ipad);
-		if (ret)
-			goto calc_fail;
-
-		authkeylen = ds;
-	} else {
-		memcpy(ipad, ctx->key, authkeylen);
-	}
+	ipad = ctx->ipad;
+	opad = ctx->opad;
 
+	memcpy(ipad, ctx->key, authkeylen);
 	memset(ipad + authkeylen, 0, bs - authkeylen);
 	memcpy(opad, ipad, bs);
 
@@ -798,7 +810,7 @@ static int aead_hmac_init(struct crypto_aead *cipher)
 	crypto_shash_init(&ctx->sdesc->shash);
 	crypto_shash_update(&ctx->sdesc->shash, ipad, bs);
 	crypto_shash_export(&ctx->sdesc->shash, ipad);
-	ret = copy_pad(ctx->mac_type, ctx->ipad, ipad);
+	ret = swap_pad(ctx->mac_type, ipad);
 	if (ret)
 		goto calc_fail;
 
@@ -806,25 +818,9 @@ static int aead_hmac_init(struct crypto_aead *cipher)
 	crypto_shash_init(&ctx->sdesc->shash);
 	crypto_shash_update(&ctx->sdesc->shash, opad, bs);
 	crypto_shash_export(&ctx->sdesc->shash, opad);
-	ret = copy_pad(ctx->mac_type, ctx->opad, opad);
-	if (ret)
-		goto calc_fail;
-
-	kfree(ipad);
-	kfree(opad);
-
-	return 0;
+	ret = swap_pad(ctx->mac_type, opad);
 
 calc_fail:
-	kfree(ctx->ipad);
-	ctx->ipad = NULL;
-	kfree(ctx->opad);
-	ctx->opad = NULL;
-	kfree(ipad);
-	kfree(opad);
-	kfree(ctx->sdesc);
-	ctx->sdesc = NULL;
-
 	return ret;
 }
 
@@ -832,57 +828,15 @@ static int otx_cpt_aead_cbc_aes_sha_setkey(struct crypto_aead *cipher,
 					   const unsigned char *key,
 					   unsigned int keylen)
 {
-	struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher);
-	struct crypto_authenc_key_param *param;
-	int enckeylen = 0, authkeylen = 0;
-	struct rtattr *rta = (void *)key;
-	int status = -EINVAL;
-
-	if (!RTA_OK(rta, keylen))
-		goto badkey;
-
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
-
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
-
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-	if (keylen < enckeylen)
-		goto badkey;
+	struct crypto_authenc_keys authenc_keys;
+	int status;
 
-	if (keylen > OTX_CPT_MAX_KEY_SIZE)
-		goto badkey;
-
-	authkeylen = keylen - enckeylen;
-	memcpy(ctx->key, key, keylen);
-
-	switch (enckeylen) {
-	case AES_KEYSIZE_128:
-		ctx->key_type = OTX_CPT_AES_128_BIT;
-		break;
-	case AES_KEYSIZE_192:
-		ctx->key_type = OTX_CPT_AES_192_BIT;
-		break;
-	case AES_KEYSIZE_256:
-		ctx->key_type = OTX_CPT_AES_256_BIT;
-		break;
-	default:
-		/* Invalid key length */
-		goto badkey;
-	}
-
-	ctx->enc_key_len = enckeylen;
-	ctx->auth_key_len = authkeylen;
-
-	status = aead_hmac_init(cipher);
+	status = crypto_authenc_extractkeys(&authenc_keys, key, keylen);
 	if (status)
 		goto badkey;
 
-	return 0;
+	status = aead_hmac_init(cipher, &authenc_keys);
+
 badkey:
 	return status;
 }
@@ -891,36 +845,7 @@ static int otx_cpt_aead_ecb_null_sha_setkey(struct crypto_aead *cipher,
 					    const unsigned char *key,
 					    unsigned int keylen)
 {
-	struct otx_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher);
-	struct crypto_authenc_key_param *param;
-	struct rtattr *rta = (void *)key;
-	int enckeylen = 0;
-
-	if (!RTA_OK(rta, keylen))
-		goto badkey;
-
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		goto badkey;
-
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		goto badkey;
-
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-	if (enckeylen != 0)
-		goto badkey;
-
-	if (keylen > OTX_CPT_MAX_KEY_SIZE)
-		goto badkey;
-
-	memcpy(ctx->key, key, keylen);
-	ctx->enc_key_len = enckeylen;
-	ctx->auth_key_len = keylen;
-	return 0;
-badkey:
-	return -EINVAL;
+	return otx_cpt_aead_cbc_aes_sha_setkey(cipher, key, keylen);
 }
 
 static int otx_cpt_aead_gcm_aes_setkey(struct crypto_aead *cipher,
-- 
2.43.0

[PATCH AUTOSEL 6.10 006/197] crypto: octeontx2 - Fix authenc setkey

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 7ccb750dcac8abbfc7743aab0db6a72c1c3703c7 ]

Use the generic crypto_authenc_extractkeys helper instead of custom
parsing code that is slightly broken.  Also fix a number of memory
leaks by moving memory allocation from setkey to init_tfm (setkey
can be called multiple times over the life of a tfm).

Finally accept all hash key lengths by running the digest over
extra-long keys.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../marvell/octeontx2/otx2_cptvf_algs.c       | 254 +++++++-----------
 1 file changed, 90 insertions(+), 164 deletions(-)

diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c b/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c
index 1604fc58dc13e..5aa56f20f888c 100644
--- a/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c
+++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf_algs.c
@@ -11,7 +11,6 @@
 #include <crypto/xts.h>
 #include <crypto/gcm.h>
 #include <crypto/scatterwalk.h>
-#include <linux/rtnetlink.h>
 #include <linux/sort.h>
 #include <linux/module.h>
 #include "otx2_cptvf.h"
@@ -55,6 +54,8 @@ static struct cpt_device_table se_devices = {
 	.count = ATOMIC_INIT(0)
 };
 
+static struct otx2_cpt_sdesc *alloc_sdesc(struct crypto_shash *alg);
+
 static inline int get_se_device(struct pci_dev **pdev, int *cpu_num)
 {
 	int count;
@@ -598,40 +599,56 @@ static int cpt_aead_init(struct crypto_aead *atfm, u8 cipher_type, u8 mac_type)
 	ctx->cipher_type = cipher_type;
 	ctx->mac_type = mac_type;
 
+	switch (ctx->mac_type) {
+	case OTX2_CPT_SHA1:
+		ctx->hashalg = crypto_alloc_shash("sha1", 0, 0);
+		break;
+
+	case OTX2_CPT_SHA256:
+		ctx->hashalg = crypto_alloc_shash("sha256", 0, 0);
+		break;
+
+	case OTX2_CPT_SHA384:
+		ctx->hashalg = crypto_alloc_shash("sha384", 0, 0);
+		break;
+
+	case OTX2_CPT_SHA512:
+		ctx->hashalg = crypto_alloc_shash("sha512", 0, 0);
+		break;
+	}
+
+	if (IS_ERR(ctx->hashalg))
+		return PTR_ERR(ctx->hashalg);
+
+	if (ctx->hashalg) {
+		ctx->sdesc = alloc_sdesc(ctx->hashalg);
+		if (!ctx->sdesc) {
+			crypto_free_shash(ctx->hashalg);
+			return -ENOMEM;
+		}
+	}
+
 	/*
 	 * When selected cipher is NULL we use HMAC opcode instead of
 	 * FLEXICRYPTO opcode therefore we don't need to use HASH algorithms
 	 * for calculating ipad and opad
 	 */
-	if (ctx->cipher_type != OTX2_CPT_CIPHER_NULL) {
-		switch (ctx->mac_type) {
-		case OTX2_CPT_SHA1:
-			ctx->hashalg = crypto_alloc_shash("sha1", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
-
-		case OTX2_CPT_SHA256:
-			ctx->hashalg = crypto_alloc_shash("sha256", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
+	if (ctx->cipher_type != OTX2_CPT_CIPHER_NULL && ctx->hashalg) {
+		int ss = crypto_shash_statesize(ctx->hashalg);
 
-		case OTX2_CPT_SHA384:
-			ctx->hashalg = crypto_alloc_shash("sha384", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
+		ctx->ipad = kzalloc(ss, GFP_KERNEL);
+		if (!ctx->ipad) {
+			kfree(ctx->sdesc);
+			crypto_free_shash(ctx->hashalg);
+			return -ENOMEM;
+		}
 
-		case OTX2_CPT_SHA512:
-			ctx->hashalg = crypto_alloc_shash("sha512", 0,
-							  CRYPTO_ALG_ASYNC);
-			if (IS_ERR(ctx->hashalg))
-				return PTR_ERR(ctx->hashalg);
-			break;
+		ctx->opad = kzalloc(ss, GFP_KERNEL);
+		if (!ctx->opad) {
+			kfree(ctx->ipad);
+			kfree(ctx->sdesc);
+			crypto_free_shash(ctx->hashalg);
+			return -ENOMEM;
 		}
 	}
 	switch (ctx->cipher_type) {
@@ -713,8 +730,7 @@ static void otx2_cpt_aead_exit(struct crypto_aead *tfm)
 
 	kfree(ctx->ipad);
 	kfree(ctx->opad);
-	if (ctx->hashalg)
-		crypto_free_shash(ctx->hashalg);
+	crypto_free_shash(ctx->hashalg);
 	kfree(ctx->sdesc);
 
 	if (ctx->fbk_cipher) {
@@ -788,7 +804,7 @@ static inline void swap_data64(void *buf, u32 len)
 		cpu_to_be64s(src);
 }
 
-static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)
+static int swap_pad(u8 mac_type, u8 *pad)
 {
 	struct sha512_state *sha512;
 	struct sha256_state *sha256;
@@ -796,22 +812,19 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)
 
 	switch (mac_type) {
 	case OTX2_CPT_SHA1:
-		sha1 = (struct sha1_state *) in_pad;
+		sha1 = (struct sha1_state *)pad;
 		swap_data32(sha1->state, SHA1_DIGEST_SIZE);
-		memcpy(out_pad, &sha1->state, SHA1_DIGEST_SIZE);
 		break;
 
 	case OTX2_CPT_SHA256:
-		sha256 = (struct sha256_state *) in_pad;
+		sha256 = (struct sha256_state *)pad;
 		swap_data32(sha256->state, SHA256_DIGEST_SIZE);
-		memcpy(out_pad, &sha256->state, SHA256_DIGEST_SIZE);
 		break;
 
 	case OTX2_CPT_SHA384:
 	case OTX2_CPT_SHA512:
-		sha512 = (struct sha512_state *) in_pad;
+		sha512 = (struct sha512_state *)pad;
 		swap_data64(sha512->state, SHA512_DIGEST_SIZE);
-		memcpy(out_pad, &sha512->state, SHA512_DIGEST_SIZE);
 		break;
 
 	default:
@@ -821,55 +834,54 @@ static int copy_pad(u8 mac_type, u8 *out_pad, u8 *in_pad)
 	return 0;
 }
 
-static int aead_hmac_init(struct crypto_aead *cipher)
+static int aead_hmac_init(struct crypto_aead *cipher,
+			  struct crypto_authenc_keys *keys)
 {
 	struct otx2_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher);
-	int state_size = crypto_shash_statesize(ctx->hashalg);
 	int ds = crypto_shash_digestsize(ctx->hashalg);
 	int bs = crypto_shash_blocksize(ctx->hashalg);
-	int authkeylen = ctx->auth_key_len;
+	int authkeylen = keys->authkeylen;
 	u8 *ipad = NULL, *opad = NULL;
-	int ret = 0, icount = 0;
+	int icount = 0;
+	int ret;
 
-	ctx->sdesc = alloc_sdesc(ctx->hashalg);
-	if (!ctx->sdesc)
-		return -ENOMEM;
+	if (authkeylen > bs) {
+		ret = crypto_shash_digest(&ctx->sdesc->shash, keys->authkey,
+					  authkeylen, ctx->key);
+		if (ret)
+			goto calc_fail;
 
-	ctx->ipad = kzalloc(bs, GFP_KERNEL);
-	if (!ctx->ipad) {
-		ret = -ENOMEM;
-		goto calc_fail;
-	}
+		authkeylen = ds;
+	} else
+		memcpy(ctx->key, keys->authkey, authkeylen);
 
-	ctx->opad = kzalloc(bs, GFP_KERNEL);
-	if (!ctx->opad) {
-		ret = -ENOMEM;
-		goto calc_fail;
-	}
+	ctx->enc_key_len = keys->enckeylen;
+	ctx->auth_key_len = authkeylen;
 
-	ipad = kzalloc(state_size, GFP_KERNEL);
-	if (!ipad) {
-		ret = -ENOMEM;
-		goto calc_fail;
-	}
+	if (ctx->cipher_type == OTX2_CPT_CIPHER_NULL)
+		return keys->enckeylen ? -EINVAL : 0;
 
-	opad = kzalloc(state_size, GFP_KERNEL);
-	if (!opad) {
-		ret = -ENOMEM;
-		goto calc_fail;
+	switch (keys->enckeylen) {
+	case AES_KEYSIZE_128:
+		ctx->key_type = OTX2_CPT_AES_128_BIT;
+		break;
+	case AES_KEYSIZE_192:
+		ctx->key_type = OTX2_CPT_AES_192_BIT;
+		break;
+	case AES_KEYSIZE_256:
+		ctx->key_type = OTX2_CPT_AES_256_BIT;
+		break;
+	default:
+		/* Invalid key length */
+		return -EINVAL;
 	}
 
-	if (authkeylen > bs) {
-		ret = crypto_shash_digest(&ctx->sdesc->shash, ctx->key,
-					  authkeylen, ipad);
-		if (ret)
-			goto calc_fail;
+	memcpy(ctx->key + authkeylen, keys->enckey, keys->enckeylen);
 
-		authkeylen = ds;
-	} else {
-		memcpy(ipad, ctx->key, authkeylen);
-	}
+	ipad = ctx->ipad;
+	opad = ctx->opad;
 
+	memcpy(ipad, ctx->key, authkeylen);
 	memset(ipad + authkeylen, 0, bs - authkeylen);
 	memcpy(opad, ipad, bs);
 
@@ -887,7 +899,7 @@ static int aead_hmac_init(struct crypto_aead *cipher)
 	crypto_shash_init(&ctx->sdesc->shash);
 	crypto_shash_update(&ctx->sdesc->shash, ipad, bs);
 	crypto_shash_export(&ctx->sdesc->shash, ipad);
-	ret = copy_pad(ctx->mac_type, ctx->ipad, ipad);
+	ret = swap_pad(ctx->mac_type, ipad);
 	if (ret)
 		goto calc_fail;
 
@@ -895,25 +907,9 @@ static int aead_hmac_init(struct crypto_aead *cipher)
 	crypto_shash_init(&ctx->sdesc->shash);
 	crypto_shash_update(&ctx->sdesc->shash, opad, bs);
 	crypto_shash_export(&ctx->sdesc->shash, opad);
-	ret = copy_pad(ctx->mac_type, ctx->opad, opad);
-	if (ret)
-		goto calc_fail;
-
-	kfree(ipad);
-	kfree(opad);
-
-	return 0;
+	ret = swap_pad(ctx->mac_type, opad);
 
 calc_fail:
-	kfree(ctx->ipad);
-	ctx->ipad = NULL;
-	kfree(ctx->opad);
-	ctx->opad = NULL;
-	kfree(ipad);
-	kfree(opad);
-	kfree(ctx->sdesc);
-	ctx->sdesc = NULL;
-
 	return ret;
 }
 
@@ -921,87 +917,17 @@ static int otx2_cpt_aead_cbc_aes_sha_setkey(struct crypto_aead *cipher,
 					    const unsigned char *key,
 					    unsigned int keylen)
 {
-	struct otx2_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher);
-	struct crypto_authenc_key_param *param;
-	int enckeylen = 0, authkeylen = 0;
-	struct rtattr *rta = (void *)key;
-
-	if (!RTA_OK(rta, keylen))
-		return -EINVAL;
+	struct crypto_authenc_keys authenc_keys;
 
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		return -EINVAL;
-
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		return -EINVAL;
-
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-	if (keylen < enckeylen)
-		return -EINVAL;
-
-	if (keylen > OTX2_CPT_MAX_KEY_SIZE)
-		return -EINVAL;
-
-	authkeylen = keylen - enckeylen;
-	memcpy(ctx->key, key, keylen);
-
-	switch (enckeylen) {
-	case AES_KEYSIZE_128:
-		ctx->key_type = OTX2_CPT_AES_128_BIT;
-		break;
-	case AES_KEYSIZE_192:
-		ctx->key_type = OTX2_CPT_AES_192_BIT;
-		break;
-	case AES_KEYSIZE_256:
-		ctx->key_type = OTX2_CPT_AES_256_BIT;
-		break;
-	default:
-		/* Invalid key length */
-		return -EINVAL;
-	}
-
-	ctx->enc_key_len = enckeylen;
-	ctx->auth_key_len = authkeylen;
-
-	return aead_hmac_init(cipher);
+	return crypto_authenc_extractkeys(&authenc_keys, key, keylen) ?:
+	       aead_hmac_init(cipher, &authenc_keys);
 }
 
 static int otx2_cpt_aead_ecb_null_sha_setkey(struct crypto_aead *cipher,
 					     const unsigned char *key,
 					     unsigned int keylen)
 {
-	struct otx2_cpt_aead_ctx *ctx = crypto_aead_ctx_dma(cipher);
-	struct crypto_authenc_key_param *param;
-	struct rtattr *rta = (void *)key;
-	int enckeylen = 0;
-
-	if (!RTA_OK(rta, keylen))
-		return -EINVAL;
-
-	if (rta->rta_type != CRYPTO_AUTHENC_KEYA_PARAM)
-		return -EINVAL;
-
-	if (RTA_PAYLOAD(rta) < sizeof(*param))
-		return -EINVAL;
-
-	param = RTA_DATA(rta);
-	enckeylen = be32_to_cpu(param->enckeylen);
-	key += RTA_ALIGN(rta->rta_len);
-	keylen -= RTA_ALIGN(rta->rta_len);
-	if (enckeylen != 0)
-		return -EINVAL;
-
-	if (keylen > OTX2_CPT_MAX_KEY_SIZE)
-		return -EINVAL;
-
-	memcpy(ctx->key, key, keylen);
-	ctx->enc_key_len = enckeylen;
-	ctx->auth_key_len = keylen;
-
-	return 0;
+	return otx2_cpt_aead_cbc_aes_sha_setkey(cipher, key, keylen);
 }
 
 static int otx2_cpt_aead_gcm_aes_setkey(struct crypto_aead *cipher,
-- 
2.43.0

[PATCH AUTOSEL 6.10 007/197] ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node()

[Sasha Levin]

From: Aleksandr Mishin <amishin@t-argos.ru>

[ Upstream commit 62fdaf9e8056e9a9e6fe63aa9c816ec2122d60c6 ]

In ice_sched_add_root_node() and ice_sched_add_node() there are calls to
devm_kcalloc() in order to allocate memory for array of pointers to
'ice_sched_node' structure. But incorrect types are used as sizeof()
arguments in these calls (structures instead of pointers) which leads to
over allocation of memory.

Adjust over allocation of memory by correcting types in devm_kcalloc()
sizeof() arguments.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_sched.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c
index ecf8f5d602921..6ca13c5dcb14e 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.c
+++ b/drivers/net/ethernet/intel/ice/ice_sched.c
@@ -28,9 +28,8 @@ ice_sched_add_root_node(struct ice_port_info *pi,
 	if (!root)
 		return -ENOMEM;
 
-	/* coverity[suspicious_sizeof] */
 	root->children = devm_kcalloc(ice_hw_to_dev(hw), hw->max_children[0],
-				      sizeof(*root), GFP_KERNEL);
+				      sizeof(*root->children), GFP_KERNEL);
 	if (!root->children) {
 		devm_kfree(ice_hw_to_dev(hw), root);
 		return -ENOMEM;
@@ -186,10 +185,9 @@ ice_sched_add_node(struct ice_port_info *pi, u8 layer,
 	if (!node)
 		return -ENOMEM;
 	if (hw->max_children[layer]) {
-		/* coverity[suspicious_sizeof] */
 		node->children = devm_kcalloc(ice_hw_to_dev(hw),
 					      hw->max_children[layer],
-					      sizeof(*node), GFP_KERNEL);
+					      sizeof(*node->children), GFP_KERNEL);
 		if (!node->children) {
 			devm_kfree(ice_hw_to_dev(hw), node);
 			return -ENOMEM;
-- 
2.43.0

[PATCH AUTOSEL 6.10 008/197] wifi: iwlwifi: mvm: Fix a race in scan abort flow

[Sasha Levin]

From: Ilan Peer <ilan.peer@intel.com>

[ Upstream commit 87c1c28a9aa149489e1667f5754fc24f4973d2d0 ]

When the upper layer requests to cancel an ongoing scan, a race
is possible in which by the time the driver starts to handle the
upper layers scan cancel flow, the FW already completed handling
the scan request and the driver received the scan complete
notification but still did not handle the notification. In such a
case the FW will simply ignore the scan abort request coming from
the driver, no notification would arrive from the FW and the entire
abort flow would be considered a failure.

To better handle this, check the status code returned by the FW for
the scan abort command. In case the status indicates that
no scan was aborted, complete the scan abort flow with success, i.e.,
the scan was aborted, as the flow is expected to consume the scan
complete notification.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/fw/api/scan.h  | 13 ++++++
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 42 +++++++++++++++----
 2 files changed, 47 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h b/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
index 6684506f4fc48..6cf237850ea0c 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/scan.h
@@ -1132,6 +1132,19 @@ struct iwl_umac_scan_abort {
 	__le32 flags;
 } __packed; /* SCAN_ABORT_CMD_UMAC_API_S_VER_1 */
 
+/**
+ * enum iwl_umac_scan_abort_status
+ *
+ * @IWL_UMAC_SCAN_ABORT_STATUS_SUCCESS: scan was successfully aborted
+ * @IWL_UMAC_SCAN_ABORT_STATUS_IN_PROGRESS: scan abort is in progress
+ * @IWL_UMAC_SCAN_ABORT_STATUS_NOT_FOUND: nothing to abort
+ */
+enum iwl_umac_scan_abort_status {
+	IWL_UMAC_SCAN_ABORT_STATUS_SUCCESS = 0,
+	IWL_UMAC_SCAN_ABORT_STATUS_IN_PROGRESS,
+	IWL_UMAC_SCAN_ABORT_STATUS_NOT_FOUND,
+};
+
 /**
  * struct iwl_umac_scan_complete
  * @uid: scan id, &enum iwl_umac_scan_uid_offsets
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
index 7615c91a55c62..c1a0e0071086c 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c
@@ -3312,13 +3312,23 @@ void iwl_mvm_rx_umac_scan_iter_complete_notif(struct iwl_mvm *mvm,
 		       mvm->scan_start);
 }
 
-static int iwl_mvm_umac_scan_abort(struct iwl_mvm *mvm, int type)
+static int iwl_mvm_umac_scan_abort(struct iwl_mvm *mvm, int type, bool *wait)
 {
-	struct iwl_umac_scan_abort cmd = {};
+	struct iwl_umac_scan_abort abort_cmd = {};
+	struct iwl_host_cmd cmd = {
+		.id = WIDE_ID(IWL_ALWAYS_LONG_GROUP, SCAN_ABORT_UMAC),
+		.len = { sizeof(abort_cmd), },
+		.data = { &abort_cmd, },
+		.flags = CMD_SEND_IN_RFKILL,
+	};
+
 	int uid, ret;
+	u32 status = IWL_UMAC_SCAN_ABORT_STATUS_NOT_FOUND;
 
 	lockdep_assert_held(&mvm->mutex);
 
+	*wait = true;
+
 	/* We should always get a valid index here, because we already
 	 * checked that this type of scan was running in the generic
 	 * code.
@@ -3327,17 +3337,28 @@ static int iwl_mvm_umac_scan_abort(struct iwl_mvm *mvm, int type)
 	if (WARN_ON_ONCE(uid < 0))
 		return uid;
 
-	cmd.uid = cpu_to_le32(uid);
+	abort_cmd.uid = cpu_to_le32(uid);
 
 	IWL_DEBUG_SCAN(mvm, "Sending scan abort, uid %u\n", uid);
 
-	ret = iwl_mvm_send_cmd_pdu(mvm,
-				   WIDE_ID(IWL_ALWAYS_LONG_GROUP, SCAN_ABORT_UMAC),
-				   CMD_SEND_IN_RFKILL, sizeof(cmd), &cmd);
+	ret = iwl_mvm_send_cmd_status(mvm, &cmd, &status);
+
+	IWL_DEBUG_SCAN(mvm, "Scan abort: ret=%d, status=%u\n", ret, status);
 	if (!ret)
 		mvm->scan_uid_status[uid] = type << IWL_MVM_SCAN_STOPPING_SHIFT;
 
-	IWL_DEBUG_SCAN(mvm, "Scan abort: ret=%d\n", ret);
+	/* Handle the case that the FW is no longer familiar with the scan that
+	 * is to be stopped. In such a case, it is expected that the scan
+	 * complete notification was already received but not yet processed.
+	 * In such a case, there is no need to wait for a scan complete
+	 * notification and the flow should continue similar to the case that
+	 * the scan was really aborted.
+	 */
+	if (status == IWL_UMAC_SCAN_ABORT_STATUS_NOT_FOUND) {
+		mvm->scan_uid_status[uid] = type << IWL_MVM_SCAN_STOPPING_SHIFT;
+		*wait = false;
+	}
+
 	return ret;
 }
 
@@ -3347,6 +3368,7 @@ static int iwl_mvm_scan_stop_wait(struct iwl_mvm *mvm, int type)
 	static const u16 scan_done_notif[] = { SCAN_COMPLETE_UMAC,
 					      SCAN_OFFLOAD_COMPLETE, };
 	int ret;
+	bool wait = true;
 
 	lockdep_assert_held(&mvm->mutex);
 
@@ -3358,7 +3380,7 @@ static int iwl_mvm_scan_stop_wait(struct iwl_mvm *mvm, int type)
 	IWL_DEBUG_SCAN(mvm, "Preparing to stop scan, type %x\n", type);
 
 	if (fw_has_capa(&mvm->fw->ucode_capa, IWL_UCODE_TLV_CAPA_UMAC_SCAN))
-		ret = iwl_mvm_umac_scan_abort(mvm, type);
+		ret = iwl_mvm_umac_scan_abort(mvm, type, &wait);
 	else
 		ret = iwl_mvm_lmac_scan_abort(mvm);
 
@@ -3366,6 +3388,10 @@ static int iwl_mvm_scan_stop_wait(struct iwl_mvm *mvm, int type)
 		IWL_DEBUG_SCAN(mvm, "couldn't stop scan type %d\n", type);
 		iwl_remove_notification(&mvm->notif_wait, &wait_scan_done);
 		return ret;
+	} else if (!wait) {
+		IWL_DEBUG_SCAN(mvm, "no need to wait for scan type %d\n", type);
+		iwl_remove_notification(&mvm->notif_wait, &wait_scan_done);
+		return 0;
 	}
 
 	return iwl_wait_notification(&mvm->notif_wait, &wait_scan_done,
-- 
2.43.0

[PATCH AUTOSEL 6.10 009/197] wifi: iwlwifi: mvm: drop wrong STA selection in TX

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 1c7e1068a7c9c39ed27636db93e71911e0045419 ]

This shouldn't happen at all, since in station mode all MMPDUs
go through the TXQ for the STA, and not this function. There
may or may not be a race in mac80211 through which this might
happen for some frames while a station is being added, but in
that case we can also just drop the frame and pretend the STA
didn't exist yet.

Also, the code is simply wrong since it uses deflink, and it's
not easy to fix it since the mvmvif->ap_sta pointer cannot be
used without the mutex, and perhaps the right link might not
even be known.

Just drop the frame at that point instead of trying to fix it
up.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb8854057ded03c7dc81d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c    | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 259afecd1a98d..be76234392dd6 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -834,20 +834,10 @@ void iwl_mvm_mac_tx(struct ieee80211_hw *hw,
 	if (ieee80211_is_mgmt(hdr->frame_control))
 		sta = NULL;
 
-	/* If there is no sta, and it's not offchannel - send through AP */
+	/* this shouldn't even happen: just drop */
 	if (!sta && info->control.vif->type == NL80211_IFTYPE_STATION &&
-	    !offchannel) {
-		struct iwl_mvm_vif *mvmvif =
-			iwl_mvm_vif_from_mac80211(info->control.vif);
-		u8 ap_sta_id = READ_ONCE(mvmvif->deflink.ap_sta_id);
-
-		if (ap_sta_id < mvm->fw->ucode_capa.num_stations) {
-			/* mac80211 holds rcu read lock */
-			sta = rcu_dereference(mvm->fw_id_to_mac_id[ap_sta_id]);
-			if (IS_ERR_OR_NULL(sta))
-				goto drop;
-		}
-	}
+	    !offchannel)
+		goto drop;
 
 	if (tmp_sta && !sta && link_id != IEEE80211_LINK_UNSPECIFIED &&
 	    !ieee80211_is_probe_resp(hdr->frame_control)) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 010/197] wifi: cfg80211: Set correct chandef when starting CAC

[Sasha Levin]

From: Issam Hamdi <ih@simonwunderlich.de>

[ Upstream commit 20361712880396e44ce80aaeec2d93d182035651 ]

When starting CAC in a mode other than AP mode, it return a
"WARNING: CPU: 0 PID: 63 at cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]"
caused by the chandef.chan being null at the end of CAC.

Solution: Ensure the channel definition is set for the different modes
when starting CAC to avoid getting a NULL 'chan' at the end of CAC.

 Call Trace:
  ? show_regs.part.0+0x14/0x16
  ? __warn+0x67/0xc0
  ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
  ? report_bug+0xa7/0x130
  ? exc_overflow+0x30/0x30
  ? handle_bug+0x27/0x50
  ? exc_invalid_op+0x18/0x60
  ? handle_exception+0xf6/0xf6
  ? exc_overflow+0x30/0x30
  ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
  ? exc_overflow+0x30/0x30
  ? cfg80211_chandef_dfs_usable+0x20/0xaf [cfg80211]
  ? regulatory_propagate_dfs_state.cold+0x1b/0x4c [cfg80211]
  ? cfg80211_propagate_cac_done_wk+0x1a/0x30 [cfg80211]
  ? process_one_work+0x165/0x280
  ? worker_thread+0x120/0x3f0
  ? kthread+0xc2/0xf0
  ? process_one_work+0x280/0x280
  ? kthread_complete_and_exit+0x20/0x20
  ? ret_from_fork+0x19/0x24

Reported-by: Kretschmer Mathias <mathias.kretschmer@fit.fraunhofer.de>
Signed-off-by: Issam Hamdi <ih@simonwunderlich.de>
Link: https://patch.msgid.link/20240816142418.3381951-1-ih@simonwunderlich.de
[shorten subject, remove OCB, reorder cases to match previous list]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/nl80211.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 967bc4935b4ed..0c2a7542c3d09 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -10023,7 +10023,20 @@ static int nl80211_start_radar_detection(struct sk_buff *skb,
 
 	err = rdev_start_radar_detection(rdev, dev, &chandef, cac_time_ms);
 	if (!err) {
-		wdev->links[0].ap.chandef = chandef;
+		switch (wdev->iftype) {
+		case NL80211_IFTYPE_AP:
+		case NL80211_IFTYPE_P2P_GO:
+			wdev->links[0].ap.chandef = chandef;
+			break;
+		case NL80211_IFTYPE_ADHOC:
+			wdev->u.ibss.chandef = chandef;
+			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			wdev->u.mesh.chandef = chandef;
+			break;
+		default:
+			break;
+		}
 		wdev->cac_started = true;
 		wdev->cac_start_time = jiffies;
 		wdev->cac_time_ms = cac_time_ms;
-- 
2.43.0

[PATCH AUTOSEL 6.10 011/197] net/xen-netback: prevent UAF in xenvif_flush_hash()

[Sasha Levin]

From: Jeongjun Park <aha310510@gmail.com>

[ Upstream commit 0fa5e94a1811d68fbffa0725efe6d4ca62c03d12 ]

During the list_for_each_entry_rcu iteration call of xenvif_flush_hash,
kfree_rcu does not exist inside the rcu read critical section, so if
kfree_rcu is called when the rcu grace period ends during the iteration,
UAF occurs when accessing head->next after the entry becomes free.

Therefore, to solve this, you need to change it to list_for_each_entry_safe.

Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/xen-netback/hash.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/xen-netback/hash.c b/drivers/net/xen-netback/hash.c
index ff96f22648efd..45ddce35f6d2c 100644
--- a/drivers/net/xen-netback/hash.c
+++ b/drivers/net/xen-netback/hash.c
@@ -95,7 +95,7 @@ static u32 xenvif_new_hash(struct xenvif *vif, const u8 *data,
 
 static void xenvif_flush_hash(struct xenvif *vif)
 {
-	struct xenvif_hash_cache_entry *entry;
+	struct xenvif_hash_cache_entry *entry, *n;
 	unsigned long flags;
 
 	if (xenvif_hash_cache_size == 0)
@@ -103,8 +103,7 @@ static void xenvif_flush_hash(struct xenvif *vif)
 
 	spin_lock_irqsave(&vif->hash.cache.lock, flags);
 
-	list_for_each_entry_rcu(entry, &vif->hash.cache.list, link,
-				lockdep_is_held(&vif->hash.cache.lock)) {
+	list_for_each_entry_safe(entry, n, &vif->hash.cache.list, link) {
 		list_del_rcu(&entry->link);
 		vif->hash.cache.count--;
 		kfree_rcu(entry, rcu);
-- 
2.43.0

[PATCH AUTOSEL 6.10 012/197] net: hisilicon: hip04: fix OF node leak in probe()

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 17555297dbd5bccc93a01516117547e26a61caf1 ]

Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hip04_eth.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index b91e7a06b97f7..beb815e5289b1 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -947,6 +947,7 @@ static int hip04_mac_probe(struct platform_device *pdev)
 	priv->tx_coalesce_timer.function = tx_done;
 
 	priv->map = syscon_node_to_regmap(arg.np);
+	of_node_put(arg.np);
 	if (IS_ERR(priv->map)) {
 		dev_warn(d, "no syscon hisilicon,hip04-ppe\n");
 		ret = PTR_ERR(priv->map);
-- 
2.43.0

[PATCH AUTOSEL 6.10 013/197] net: hisilicon: hns_dsaf_mac: fix OF node leak in hns_mac_get_info()

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 5680cf8d34e1552df987e2f4bb1bff0b2a8c8b11 ]

Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in hns_mac_get_info().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
index f75668c479351..616a2768e5048 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c
@@ -933,6 +933,7 @@ static int hns_mac_get_info(struct hns_mac_cb *mac_cb)
 			mac_cb->cpld_ctrl = NULL;
 		} else {
 			syscon = syscon_node_to_regmap(cpld_args.np);
+			of_node_put(cpld_args.np);
 			if (IS_ERR_OR_NULL(syscon)) {
 				dev_dbg(mac_cb->dev, "no cpld-syscon found!\n");
 				mac_cb->cpld_ctrl = NULL;
-- 
2.43.0

[PATCH AUTOSEL 6.10 014/197] net: hisilicon: hns_mdio: fix OF node leak in probe()

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit e62beddc45f487b9969821fad3a0913d9bc18a2f ]

Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns_mdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns_mdio.c b/drivers/net/ethernet/hisilicon/hns_mdio.c
index ed73707176c1a..8a047145f0c50 100644
--- a/drivers/net/ethernet/hisilicon/hns_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns_mdio.c
@@ -575,6 +575,7 @@ static int hns_mdio_probe(struct platform_device *pdev)
 						MDIO_SC_RESET_ST;
 				}
 			}
+			of_node_put(reg_args.np);
 		} else {
 			dev_warn(&pdev->dev, "find syscon ret = %#x\n", ret);
 			mdio_dev->subctrl_vbase = NULL;
-- 
2.43.0

[PATCH AUTOSEL 6.10 015/197] ACPI: PAD: fix crash in exit_round_robin()

[Sasha Levin]

From: Seiji Nishikawa <snishika@redhat.com>

[ Upstream commit 0a2ed70a549e61c5181bad5db418d223b68ae932 ]

The kernel occasionally crashes in cpumask_clear_cpu(), which is called
within exit_round_robin(), because when executing clear_bit(nr, addr) with
nr set to 0xffffffff, the address calculation may cause misalignment within
the memory, leading to access to an invalid memory address.

----------
BUG: unable to handle kernel paging request at ffffffffe0740618
        ...
CPU: 3 PID: 2919323 Comm: acpi_pad/14 Kdump: loaded Tainted: G           OE  X --------- -  - 4.18.0-425.19.2.el8_7.x86_64 #1
        ...
RIP: 0010:power_saving_thread+0x313/0x411 [acpi_pad]
Code: 89 cd 48 89 d3 eb d1 48 c7 c7 55 70 72 c0 e8 64 86 b0 e4 c6 05 0d a1 02 00 01 e9 bc fd ff ff 45 89 e4 42 8b 04 a5 20 82 72 c0 <f0> 48 0f b3 05 f4 9c 01 00 42 c7 04 a5 20 82 72 c0 ff ff ff ff 31
RSP: 0018:ff72a5d51fa77ec8 EFLAGS: 00010202
RAX: 00000000ffffffff RBX: ff462981e5d8cb80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
RBP: ff46297556959d80 R08: 0000000000000382 R09: ff46297c8d0f38d8
R10: 0000000000000000 R11: 0000000000000001 R12: 000000000000000e
R13: 0000000000000000 R14: ffffffffffffffff R15: 000000000000000e
FS:  0000000000000000(0000) GS:ff46297a800c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffe0740618 CR3: 0000007e20410004 CR4: 0000000000771ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 ? acpi_pad_add+0x120/0x120 [acpi_pad]
 kthread+0x10b/0x130
 ? set_kthread_struct+0x50/0x50
 ret_from_fork+0x1f/0x40
        ...
CR2: ffffffffe0740618

crash> dis -lr ffffffffc0726923
        ...
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 114
0xffffffffc0726918 <power_saving_thread+776>:	mov    %r12d,%r12d
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./include/linux/cpumask.h: 325
0xffffffffc072691b <power_saving_thread+779>:	mov    -0x3f8d7de0(,%r12,4),%eax
/usr/src/debug/kernel-4.18.0-425.19.2.el8_7/linux-4.18.0-425.19.2.el8_7.x86_64/./arch/x86/include/asm/bitops.h: 80
0xffffffffc0726923 <power_saving_thread+787>:	lock btr %rax,0x19cf4(%rip)        # 0xffffffffc0740620 <pad_busy_cpus_bits>

crash> px tsk_in_cpu[14]
$66 = 0xffffffff

crash> px 0xffffffffc072692c+0x19cf4
$99 = 0xffffffffc0740620

crash> sym 0xffffffffc0740620
ffffffffc0740620 (b) pad_busy_cpus_bits [acpi_pad]

crash> px pad_busy_cpus_bits[0]
$42 = 0xfffc0
----------

To fix this, ensure that tsk_in_cpu[tsk_index] != -1 before calling
cpumask_clear_cpu() in exit_round_robin(), just as it is done in
round_robin_cpu().

Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Link: https://patch.msgid.link/20240825141352.25280-1-snishika@redhat.com
[ rjw: Subject edit, avoid updates to the same value ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpi_pad.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index bd1ad07f02907..e84509b19f94d 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -132,8 +132,10 @@ static void exit_round_robin(unsigned int tsk_index)
 {
 	struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);
 
-	cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
-	tsk_in_cpu[tsk_index] = -1;
+	if (tsk_in_cpu[tsk_index] != -1) {
+		cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
+		tsk_in_cpu[tsk_index] = -1;
+	}
 }
 
 static unsigned int idle_pct = 5; /* percentage */
-- 
2.43.0

[PATCH AUTOSEL 6.10 016/197] ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit 5accb265f7a1b23e52b0ec42313d1e12895552f4 ]

ACPICA commit 2802af722bbde7bf1a7ac68df68e179e2555d361

If acpi_ps_get_next_namepath() fails, the previously allocated
union acpi_parse_object needs to be freed before returning the
status code.

The issue was first being reported on the Linux ACPI mailing list:

Link: https://lore.kernel.org/linux-acpi/56f94776-484f-48c0-8855-dba8e6a7793b@yandex.ru/T/
Link: https://github.com/acpica/acpica/commit/2802af72
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/psargs.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index 422c074ed2897..7debfd5ce0d86 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -820,6 +820,10 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
 			    acpi_ps_get_next_namepath(walk_state, parser_state,
 						      arg,
 						      ACPI_NOT_METHOD_CALL);
+			if (ACPI_FAILURE(status)) {
+				acpi_ps_free_op(arg);
+				return_ACPI_STATUS(status);
+			}
 		} else {
 			/* Single complex argument, nothing returned */
 
@@ -854,6 +858,10 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
 			    acpi_ps_get_next_namepath(walk_state, parser_state,
 						      arg,
 						      ACPI_POSSIBLE_METHOD_CALL);
+			if (ACPI_FAILURE(status)) {
+				acpi_ps_free_op(arg);
+				return_ACPI_STATUS(status);
+			}
 
 			if (arg->common.aml_opcode == AML_INT_METHODCALL_OP) {
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 017/197] ACPICA: Fix memory leak if acpi_ps_get_next_field() fails

[Sasha Levin]

From: Armin Wolf <W_Armin@gmx.de>

[ Upstream commit e6169a8ffee8a012badd8c703716e761ce851b15 ]

ACPICA commit 1280045754264841b119a5ede96cd005bc09b5a7

If acpi_ps_get_next_field() fails, the previously created field list
needs to be properly disposed before returning the status code.

Link: https://github.com/acpica/acpica/commit/12800457
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Rename local variable to avoid compiler confusion ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/psargs.c | 39 ++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index 7debfd5ce0d86..28582adfc0aca 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -25,6 +25,8 @@ acpi_ps_get_next_package_length(struct acpi_parse_state *parser_state);
 static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
 						       *parser_state);
 
+static void acpi_ps_free_field_list(union acpi_parse_object *start);
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ps_get_next_package_length
@@ -683,6 +685,39 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state
 	return_PTR(field);
 }
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ps_free_field_list
+ *
+ * PARAMETERS:  start               - First Op in field list
+ *
+ * RETURN:      None.
+ *
+ * DESCRIPTION: Free all Op objects inside a field list.
+ *
+ ******************************************************************************/
+
+static void acpi_ps_free_field_list(union acpi_parse_object *start)
+{
+	union acpi_parse_object *cur = start;
+	union acpi_parse_object *next;
+	union acpi_parse_object *arg;
+
+	while (cur) {
+		next = cur->common.next;
+
+		/* AML_INT_CONNECTION_OP can have a single argument */
+
+		arg = acpi_ps_get_arg(cur, 0);
+		if (arg) {
+			acpi_ps_free_op(arg);
+		}
+
+		acpi_ps_free_op(cur);
+		cur = next;
+	}
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ps_get_next_arg
@@ -751,6 +786,10 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,
 			while (parser_state->aml < parser_state->pkg_end) {
 				field = acpi_ps_get_next_field(parser_state);
 				if (!field) {
+					if (arg) {
+						acpi_ps_free_field_list(arg);
+					}
+
 					return_ACPI_STATUS(AE_NO_MEMORY);
 				}
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 018/197] fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name

[Sasha Levin]

From: Li Zhijian <lizhijian@fujitsu.com>

[ Upstream commit 7f7b850689ac06a62befe26e1fd1806799e7f152 ]

It's observed that a crash occurs during hot-remove a memory device,
in which user is accessing the hugetlb. See calltrace as following:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 14045 at arch/x86/mm/fault.c:1278 do_user_addr_fault+0x2a0/0x790
Modules linked in: kmem device_dax cxl_mem cxl_pmem cxl_port cxl_pci dax_hmem dax_pmem nd_pmem cxl_acpi nd_btt cxl_core crc32c_intel nvme virtiofs fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc s
mirror dm_region_hash dm_log dm_mod
CPU: 1 PID: 14045 Comm: daxctl Not tainted 6.10.0-rc2-lizhijian+ #492
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:do_user_addr_fault+0x2a0/0x790
Code: 48 8b 00 a8 04 0f 84 b5 fe ff ff e9 1c ff ff ff 4c 89 e9 4c 89 e2 be 01 00 00 00 bf 02 00 00 00 e8 b5 ef 24 00 e9 42 fe ff ff <0f> 0b 48 83 c4 08 4c 89 ea 48 89 ee 4c 89 e7 5b 5d 41 5c 41 5d 41
RSP: 0000:ffffc90000a575f0 EFLAGS: 00010046
RAX: ffff88800c303600 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000001000 RSI: ffffffff82504162 RDI: ffffffff824b2c36
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc90000a57658
R13: 0000000000001000 R14: ffff88800bc2e040 R15: 0000000000000000
FS:  00007f51cb57d880(0000) GS:ffff88807fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000001000 CR3: 00000000072e2004 CR4: 00000000001706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 ? __warn+0x8d/0x190
 ? do_user_addr_fault+0x2a0/0x790
 ? report_bug+0x1c3/0x1d0
 ? handle_bug+0x3c/0x70
 ? exc_invalid_op+0x14/0x70
 ? asm_exc_invalid_op+0x16/0x20
 ? do_user_addr_fault+0x2a0/0x790
 ? exc_page_fault+0x31/0x200
 exc_page_fault+0x68/0x200
<...snip...>
BUG: unable to handle page fault for address: 0000000000001000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0
 Oops: Oops: 0000 [#1] PREEMPT SMP PTI
 ---[ end trace 0000000000000000 ]---
 BUG: unable to handle page fault for address: 0000000000001000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 800000000ad92067 P4D 800000000ad92067 PUD 7677067 PMD 0
 Oops: Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 1 PID: 14045 Comm: daxctl Kdump: loaded Tainted: G        W          6.10.0-rc2-lizhijian+ #492
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
 RIP: 0010:dentry_name+0x1f4/0x440
<...snip...>
? dentry_name+0x2fa/0x440
vsnprintf+0x1f3/0x4f0
vprintk_store+0x23a/0x540
vprintk_emit+0x6d/0x330
_printk+0x58/0x80
dump_mapping+0x10b/0x1a0
? __pfx_free_object_rcu+0x10/0x10
__dump_page+0x26b/0x3e0
? vprintk_emit+0xe0/0x330
? _printk+0x58/0x80
? dump_page+0x17/0x50
dump_page+0x17/0x50
do_migrate_range+0x2f7/0x7f0
? do_migrate_range+0x42/0x7f0
? offline_pages+0x2f4/0x8c0
offline_pages+0x60a/0x8c0
memory_subsys_offline+0x9f/0x1c0
? lockdep_hardirqs_on+0x77/0x100
? _raw_spin_unlock_irqrestore+0x38/0x60
device_offline+0xe3/0x110
state_store+0x6e/0xc0
kernfs_fop_write_iter+0x143/0x200
vfs_write+0x39f/0x560
ksys_write+0x65/0xf0
do_syscall_64+0x62/0x130

Previously, some sanity check have been done in dump_mapping() before
the print facility parsing '%pd' though, it's still possible to run into
an invalid dentry.d_name.name.

Since dump_mapping() only needs to dump the filename only, retrieve it
by itself in a safer way to prevent an unnecessary crash.

Note that either retrieving the filename with '%pd' or
strncpy_from_kernel_nofault(), the filename could be unreliable.

Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://lore.kernel.org/r/20240826055503.1522320-1-lizhijian@fujitsu.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/inode.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/inode.c b/fs/inode.c
index f5add7222c98e..bdff0ff61570b 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -593,6 +593,7 @@ void dump_mapping(const struct address_space *mapping)
 	struct hlist_node *dentry_first;
 	struct dentry *dentry_ptr;
 	struct dentry dentry;
+	char fname[64] = {};
 	unsigned long ino;
 
 	/*
@@ -629,11 +630,14 @@ void dump_mapping(const struct address_space *mapping)
 		return;
 	}
 
+	if (strncpy_from_kernel_nofault(fname, dentry.d_name.name, 63) < 0)
+		strscpy(fname, "<invalid>");
 	/*
-	 * if dentry is corrupted, the %pd handler may still crash,
-	 * but it's unlikely that we reach here with a corrupt mapping
+	 * Even if strncpy_from_kernel_nofault() succeeded,
+	 * the fname could be unreliable
 	 */
-	pr_warn("aops:%ps ino:%lx dentry name:\"%pd\"\n", a_ops, ino, &dentry);
+	pr_warn("aops:%ps ino:%lx dentry name(?):\"%s\"\n",
+		a_ops, ino, fname);
 }
 
 void clear_inode(struct inode *inode)
-- 
2.43.0

[PATCH AUTOSEL 6.10 019/197] e1000e: avoid failing the system during pm_suspend

[Sasha Levin]

From: Vitaly Lifshits <vitaly.lifshits@intel.com>

[ Upstream commit 0a6ad4d9e1690c7faa3a53f762c877e477093657 ]

Occasionally when the system goes into pm_suspend, the suspend might fail
due to a PHY access error on the network adapter. Previously, this would
have caused the whole system to fail to go to a low power state.
An example of this was reported in the following Bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=205015

[ 1663.694828] e1000e 0000:00:19.0 eth0: Failed to disable ULP
[ 1664.731040] asix 2-3:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 1665.093513] e1000e 0000:00:19.0 eth0: Hardware Error
[ 1665.596760] e1000e 0000:00:19.0: pci_pm_resume+0x0/0x80 returned 0 after 2975399 usecs

and then the system never recovers from it, and all the following suspend failed due to this
[22909.393854] PM: pci_pm_suspend(): e1000e_pm_suspend+0x0/0x760 [e1000e] returns -2
[22909.393858] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x160 returns -2
[22909.393861] PM: Device 0000:00:1f.6 failed to suspend async: error -2

This can be avoided by changing the return values of __e1000_shutdown and
e1000e_pm_suspend functions so that they always return 0 (success). This
is consistent with what other drivers do.

If the e1000e driver encounters a hardware error during suspend, potential
side effects include slightly higher power draw or non-working wake on
LAN. This is preferred to a system-level suspend failure, and a warning
message is written to the system log, so that the user can be aware that
the LAN controller experienced a problem during suspend.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205015
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 3cd161c6672be..e23eedc791d66 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6671,8 +6671,10 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 		if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
 			/* enable wakeup by the PHY */
 			retval = e1000_init_phy_wakeup(adapter, wufc);
-			if (retval)
-				return retval;
+			if (retval) {
+				e_err("Failed to enable wakeup\n");
+				goto skip_phy_configurations;
+			}
 		} else {
 			/* enable wakeup by the MAC */
 			ew32(WUFC, wufc);
@@ -6693,8 +6695,10 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 			 * or broadcast.
 			 */
 			retval = e1000_enable_ulp_lpt_lp(hw, !runtime);
-			if (retval)
-				return retval;
+			if (retval) {
+				e_err("Failed to enable ULP\n");
+				goto skip_phy_configurations;
+			}
 		}
 	}
 
@@ -6726,6 +6730,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
 		hw->phy.ops.release(hw);
 	}
 
+skip_phy_configurations:
 	/* Release control of h/w to f/w.  If f/w is AMT enabled, this
 	 * would have already happened in close and is redundant.
 	 */
@@ -6968,15 +6973,13 @@ static int e1000e_pm_suspend(struct device *dev)
 	e1000e_pm_freeze(dev);
 
 	rc = __e1000_shutdown(pdev, false);
-	if (rc) {
-		e1000e_pm_thaw(dev);
-	} else {
+	if (!rc) {
 		/* Introduce S0ix implementation */
 		if (adapter->flags2 & FLAG2_ENABLE_S0IX_FLOWS)
 			e1000e_s0ix_entry_flow(adapter);
 	}
 
-	return rc;
+	return 0;
 }
 
 static int e1000e_pm_resume(struct device *dev)
-- 
2.43.0

[PATCH AUTOSEL 6.10 020/197] ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB

[Sasha Levin]

From: Tamim Khan <tamim@fusetak.com>

[ Upstream commit 49e9cc315604972cc14868cb67831e3e8c3f1470 ]

Like other Asus Vivobooks, the Asus Vivobook Go E1404GAB has a DSDT
that describes IRQ 1 as ActiveLow, while the kernel overrides to Edge_High.

This override prevents the internal keyboard from working.

Fix the problem by adding this laptop to the table that prevents the kernel
from overriding the IRQ.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219212
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Link: https://patch.msgid.link/20240903014317.38858-1-tamim@fusetak.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/resource.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c
index df5d5a554b388..c65c72c515e67 100644
--- a/drivers/acpi/resource.c
+++ b/drivers/acpi/resource.c
@@ -503,6 +503,13 @@ static const struct dmi_system_id irq1_level_low_skip_override[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "B2502FBA"),
 		},
 	},
+	{
+		/* Asus Vivobook Go E1404GAB */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "E1404GAB"),
+		},
+	},
 	{
 		/* Asus Vivobook E1504GA */
 		.matches = {
-- 
2.43.0

[PATCH AUTOSEL 6.10 021/197] wifi: mt76: mt7915: disable tx worker during tx BA session enable/disable

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 256cbd26fbafb30ba3314339106e5c594e9bd5f9 ]

Avoids firmware race condition.

Link: https://patch.msgid.link/20240827093011.18621-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 9599adf104b16..758249b20c222 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -690,13 +690,17 @@ int mt7915_mcu_add_tx_ba(struct mt7915_dev *dev,
 {
 	struct mt7915_sta *msta = (struct mt7915_sta *)params->sta->drv_priv;
 	struct mt7915_vif *mvif = msta->vif;
+	int ret;
 
+	mt76_worker_disable(&dev->mt76.tx_worker);
 	if (enable && !params->amsdu)
 		msta->wcid.amsdu = false;
+	ret = mt76_connac_mcu_sta_ba(&dev->mt76, &mvif->mt76, params,
+				     MCU_EXT_CMD(STA_REC_UPDATE),
+				     enable, true);
+	mt76_worker_enable(&dev->mt76.tx_worker);
 
-	return mt76_connac_mcu_sta_ba(&dev->mt76, &mvif->mt76, params,
-				      MCU_EXT_CMD(STA_REC_UPDATE),
-				      enable, true);
+	return ret;
 }
 
 int mt7915_mcu_add_rx_ba(struct mt7915_dev *dev,
-- 
2.43.0

[PATCH AUTOSEL 6.10 022/197] net: sched: consistently use rcu_replace_pointer() in taprio_change()

[Sasha Levin]

From: Dmitry Antipov <dmantipov@yandex.ru>

[ Upstream commit d5c4546062fd6f5dbce575c7ea52ad66d1968678 ]

According to Vinicius (and carefully looking through the whole
https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa
once again), txtime branch of 'taprio_change()' is not going to
race against 'advance_sched()'. But using 'rcu_replace_pointer()'
in the former may be a good idea as well.

Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sched/sch_taprio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index b284a06b5a75f..847e1cc6052ec 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -1952,7 +1952,9 @@ static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
 			goto unlock;
 		}
 
-		rcu_assign_pointer(q->admin_sched, new_admin);
+		/* Not going to race against advance_sched(), but still */
+		admin = rcu_replace_pointer(q->admin_sched, new_admin,
+					    lockdep_rtnl_is_held());
 		if (admin)
 			call_rcu(&admin->rcu, taprio_free_sched_cb);
 	} else {
-- 
2.43.0

[PATCH AUTOSEL 6.10 023/197] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122

[Sasha Levin]

From: Hilda Wu <hildawu@realtek.com>

[ Upstream commit bdf9557f70e7512bb2f754abf90d9e9958745316 ]

Add the support ID (0x0489, 0xe122) to usb_device_id table for
Realtek RTL8852C.

The device info from /sys/kernel/debug/usb/devices as below.

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e122 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 0927f51867c26..425419b1398d5 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -539,6 +539,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* Realtek 8852BE Bluetooth devices */
 	{ USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK |
-- 
2.43.0

[PATCH AUTOSEL 6.10 024/197] Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B

[Sasha Levin]

From: Hilda Wu <hildawu@realtek.com>

[ Upstream commit 9a0570948c5def5c59e588dc0e009ed850a1f5a1 ]

For tracking multiple devices concurrently with a condition.
The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk
on RTL8852B controller.

The quirk setting is based on commit 9e14606d8f38 ("Bluetooth: msft:
Extended monitor tracking by address filter")

With this setting, when a pattern monitor detects a device, this
feature issues an address monitor for tracking that device. Let the
original pattern monitor keep monitor new devices.

Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bluetooth/btrtl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index bfcb41a57655f..78b5d44558d73 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -1296,6 +1296,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
 			btrealtek_set_flag(hdev, REALTEK_ALT6_CONTINUOUS_TX_CHIP);
 
 		if (btrtl_dev->project_id == CHIP_ID_8852A ||
+		    btrtl_dev->project_id == CHIP_ID_8852B ||
 		    btrtl_dev->project_id == CHIP_ID_8852C)
 			set_bit(HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER, &hdev->quirks);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 025/197] ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit eb7b0f12e13ba99e64e3a690c2166895ed63b437 ]

The Panasonic Toughbook CF-18 advertises both native and vendor backlight
control interfaces. But only the vendor one actually works.

acpi_video_get_backlight_type() will pick the non working native backlight
by default, add a quirk to select the working vendor backlight instead.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240907124419.21195-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/video_detect.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index ff6f260433a11..48cf850dd08c7 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -254,6 +254,14 @@ static const struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "PCG-FRV35"),
 		},
 	},
+	{
+	 .callback = video_detect_force_vendor,
+	 /* Panasonic Toughbook CF-18 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Matsushita Electric Industrial"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+		},
+	},
 
 	/*
 	 * Toshiba models with Transflective display, these need to use
-- 
2.43.0

[PATCH AUTOSEL 6.10 026/197] ACPI: CPPC: Add support for setting EPP register in FFH

[Sasha Levin]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit aaf21ac93909e08a12931173336bdb52ac8499f1 ]

Some Asus AMD systems are reported to not be able to change EPP values
because the BIOS doesn't advertise support for the CPPC MSR and the PCC
region is not configured.

However the ACPI 6.2 specification allows CPC registers to be declared
in FFH:
```
Starting with ACPI Specification 6.2, all _CPC registers can be in
PCC, System Memory, System IO, or Functional Fixed Hardware address
spaces. OSPM support for this more flexible register space scheme
is indicated by the “Flexible Address Space for CPPC Registers” _OSC
bit.
```

If this _OSC has been set allow using FFH to configure EPP.

Reported-by: al0uette@outlook.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218686
Suggested-by: al0uette@outlook.com
Tested-by: vderp@icloud.com
Tested-by: al0uette@outlook.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240910031524.106387-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/cppc_acpi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 1d857978f5f40..9777369084d80 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -103,6 +103,11 @@ static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
 				(cpc)->cpc_entry.reg.space_id ==	\
 				ACPI_ADR_SPACE_PLATFORM_COMM)
 
+/* Check if a CPC register is in FFH */
+#define CPC_IN_FFH(cpc) ((cpc)->type == ACPI_TYPE_BUFFER &&		\
+				(cpc)->cpc_entry.reg.space_id ==	\
+				ACPI_ADR_SPACE_FIXED_HARDWARE)
+
 /* Check if a CPC register is in SystemMemory */
 #define CPC_IN_SYSTEM_MEMORY(cpc) ((cpc)->type == ACPI_TYPE_BUFFER &&	\
 				(cpc)->cpc_entry.reg.space_id ==	\
@@ -1484,9 +1489,12 @@ int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable)
 		/* after writing CPC, transfer the ownership of PCC to platform */
 		ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
 		up_write(&pcc_ss_data->pcc_lock);
+	} else if (osc_cpc_flexible_adr_space_confirmed &&
+		   CPC_SUPPORTED(epp_set_reg) && CPC_IN_FFH(epp_set_reg)) {
+		ret = cpc_write(cpu, epp_set_reg, perf_ctrls->energy_perf);
 	} else {
 		ret = -ENOTSUPP;
-		pr_debug("_CPC in PCC is not supported\n");
+		pr_debug("_CPC in PCC and _CPC in FFH are not supported\n");
 	}
 
 	return ret;
-- 
2.43.0

[PATCH AUTOSEL 6.10 027/197] blk_iocost: fix more out of bound shifts

[Sasha Levin]

From: Konstantin Ovsepian <ovs@ovs.to>

[ Upstream commit 9bce8005ec0dcb23a58300e8522fe4a31da606fa ]

Recently running UBSAN caught few out of bound shifts in the
ioc_forgive_debts() function:

UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30
shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long
long')
...
Call Trace:
<IRQ>
dump_stack_lvl+0xca/0x130
__ubsan_handle_shift_out_of_bounds+0x22c/0x280
? __lock_acquire+0x6441/0x7c10
ioc_timer_fn+0x6cec/0x7750
? blk_iocost_init+0x720/0x720
? call_timer_fn+0x5d/0x470
call_timer_fn+0xfa/0x470
? blk_iocost_init+0x720/0x720
__run_timer_base+0x519/0x700
...

Actual impact of this issue was not identified but I propose to fix the
undefined behaviour.
The proposed fix to prevent those out of bound shifts consist of
precalculating exponent before using it the shift operations by taking
min value from the actual exponent and maximum possible number of bits.

Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Konstantin Ovsepian <ovs@ovs.to>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240822154137.2627818-1-ovs@ovs.to
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-iocost.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index 690ca99dfaca6..5a6098a3db57e 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -2076,7 +2076,7 @@ static void ioc_forgive_debts(struct ioc *ioc, u64 usage_us_sum, int nr_debtors,
 			      struct ioc_now *now)
 {
 	struct ioc_gq *iocg;
-	u64 dur, usage_pct, nr_cycles;
+	u64 dur, usage_pct, nr_cycles, nr_cycles_shift;
 
 	/* if no debtor, reset the cycle */
 	if (!nr_debtors) {
@@ -2138,10 +2138,12 @@ static void ioc_forgive_debts(struct ioc *ioc, u64 usage_us_sum, int nr_debtors,
 		old_debt = iocg->abs_vdebt;
 		old_delay = iocg->delay;
 
+		nr_cycles_shift = min_t(u64, nr_cycles, BITS_PER_LONG - 1);
 		if (iocg->abs_vdebt)
-			iocg->abs_vdebt = iocg->abs_vdebt >> nr_cycles ?: 1;
+			iocg->abs_vdebt = iocg->abs_vdebt >> nr_cycles_shift ?: 1;
+
 		if (iocg->delay)
-			iocg->delay = iocg->delay >> nr_cycles ?: 1;
+			iocg->delay = iocg->delay >> nr_cycles_shift ?: 1;
 
 		iocg_kick_waitq(iocg, true, now);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 028/197] nvme-pci: qdepth 1 quirk

[Sasha Levin]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit 83bdfcbdbe5d901c5fa432decf12e1725a840a56 ]

Another device has been reported to be unreliable if we have more than
one outstanding command. In this new case, data corruption may occur.
Since we have two devices now needing this quirky behavior, make a
generic quirk flag.

The same Apple quirk is clearly not "temporary", so update the comment
while moving it.

Link: https://lore.kernel.org/linux-nvme/191d810a4e3.fcc6066c765804.973611676137075390@collabora.com/
Reported-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Christoph Hellwig hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/nvme.h |  5 +++++
 drivers/nvme/host/pci.c  | 18 +++++++++---------
 2 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index 5e66bcb34d530..ff1769172778b 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -89,6 +89,11 @@ enum nvme_quirks {
 	 */
 	NVME_QUIRK_NO_DEEPEST_PS		= (1 << 5),
 
+	/*
+	 *  Problems seen with concurrent commands
+	 */
+	NVME_QUIRK_QDEPTH_ONE			= (1 << 6),
+
 	/*
 	 * Set MEDIUM priority on SQ creation
 	 */
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 18d85575cdb48..fde4073fa418e 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -2528,15 +2528,8 @@ static int nvme_pci_enable(struct nvme_dev *dev)
 	else
 		dev->io_sqes = NVME_NVM_IOSQES;
 
-	/*
-	 * Temporary fix for the Apple controller found in the MacBook8,1 and
-	 * some MacBook7,1 to avoid controller resets and data loss.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_APPLE && pdev->device == 0x2001) {
+	if (dev->ctrl.quirks & NVME_QUIRK_QDEPTH_ONE) {
 		dev->q_depth = 2;
-		dev_warn(dev->ctrl.device, "detected Apple NVMe controller, "
-			"set queue depth=%u to work around controller resets\n",
-			dev->q_depth);
 	} else if (pdev->vendor == PCI_VENDOR_ID_SAMSUNG &&
 		   (pdev->device == 0xa821 || pdev->device == 0xa822) &&
 		   NVME_CAP_MQES(dev->ctrl.cap) == 0) {
@@ -3401,6 +3394,8 @@ static const struct pci_device_id nvme_id_table[] = {
 				NVME_QUIRK_BOGUS_NID, },
 	{ PCI_VDEVICE(REDHAT, 0x0010),	/* Qemu emulated controller */
 		.driver_data = NVME_QUIRK_BOGUS_NID, },
+	{ PCI_DEVICE(0x1217, 0x8760), /* O2 Micro 64GB Steam Deck */
+		.driver_data = NVME_QUIRK_QDEPTH_ONE },
 	{ PCI_DEVICE(0x126f, 0x2262),	/* Silicon Motion generic */
 		.driver_data = NVME_QUIRK_NO_DEEPEST_PS |
 				NVME_QUIRK_BOGUS_NID, },
@@ -3535,7 +3530,12 @@ static const struct pci_device_id nvme_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMAZON, 0xcd02),
 		.driver_data = NVME_QUIRK_DMA_ADDRESS_BITS_48, },
 	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001),
-		.driver_data = NVME_QUIRK_SINGLE_VECTOR },
+		/*
+		 * Fix for the Apple controller found in the MacBook8,1 and
+		 * some MacBook7,1 to avoid controller resets and data loss.
+		 */
+		.driver_data = NVME_QUIRK_SINGLE_VECTOR |
+				NVME_QUIRK_QDEPTH_ONE },
 	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2003) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2005),
 		.driver_data = NVME_QUIRK_SINGLE_VECTOR |
-- 
2.43.0

[PATCH AUTOSEL 6.10 029/197] wifi: ath12k: fix array out-of-bound access in SoC stats

[Sasha Levin]

From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>

[ Upstream commit e106b7ad13c1d246adaa57df73edb8f8b8acb240 ]

Currently, the ath12k_soc_dp_stats::hal_reo_error array is defined with a
maximum size of DP_REO_DST_RING_MAX. However, the ath12k_dp_rx_process()
function access ath12k_soc_dp_stats::hal_reo_error using the REO
destination SRNG ring ID, which is incorrect. SRNG ring ID differ from
normal ring ID, and this usage leads to out-of-bounds array access. To
fix this issue, modify ath12k_dp_rx_process() to use the normal ring ID
directly instead of the SRNG ring ID to avoid out-of-bounds array access.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240704070811.4186543-2-quic_periyasa@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath12k/dp_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/dp_rx.c b/drivers/net/wireless/ath/ath12k/dp_rx.c
index 3cdc4c51d6dfe..f8767496fa543 100644
--- a/drivers/net/wireless/ath/ath12k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_rx.c
@@ -2702,7 +2702,7 @@ int ath12k_dp_rx_process(struct ath12k_base *ab, int ring_id,
 		if (push_reason !=
 		    HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION) {
 			dev_kfree_skb_any(msdu);
-			ab->soc_stats.hal_reo_error[dp->reo_dst_ring[ring_id].ring_id]++;
+			ab->soc_stats.hal_reo_error[ring_id]++;
 			continue;
 		}
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 030/197] wifi: ath11k: fix array out-of-bound access in SoC stats

[Sasha Levin]

From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>

[ Upstream commit 69f253e46af98af17e3efa3e5dfa72fcb7d1983d ]

Currently, the ath11k_soc_dp_stats::hal_reo_error array is defined with a
maximum size of DP_REO_DST_RING_MAX. However, the ath11k_dp_process_rx()
function access ath11k_soc_dp_stats::hal_reo_error using the REO
destination SRNG ring ID, which is incorrect. SRNG ring ID differ from
normal ring ID, and this usage leads to out-of-bounds array access. To fix
this issue, modify ath11k_dp_process_rx() to use the normal ring ID
directly instead of the SRNG ring ID to avoid out-of-bounds array access.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240704070811.4186543-3-quic_periyasa@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/dp_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index aabde24d87632..88c7a7289d06e 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -2697,7 +2697,7 @@ int ath11k_dp_process_rx(struct ath11k_base *ab, int ring_id,
 		if (unlikely(push_reason !=
 			     HAL_REO_DEST_RING_PUSH_REASON_ROUTING_INSTRUCTION)) {
 			dev_kfree_skb_any(msdu);
-			ab->soc_stats.hal_reo_error[dp->reo_dst_ring[ring_id].ring_id]++;
+			ab->soc_stats.hal_reo_error[ring_id]++;
 			continue;
 		}
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 031/197] wifi: rtw88: select WANT_DEV_COREDUMP

[Sasha Levin]

From: Zong-Zhe Yang <kevin_yang@realtek.com>

[ Upstream commit 7e989b0c1e33210c07340bf5228aa83ea52515b5 ]

We have invoked device coredump when fw crash.
Should select WANT_DEV_COREDUMP by ourselves.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240718070616.42217-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtw88/Kconfig b/drivers/net/wireless/realtek/rtw88/Kconfig
index 22838ede03cd8..02b0d698413be 100644
--- a/drivers/net/wireless/realtek/rtw88/Kconfig
+++ b/drivers/net/wireless/realtek/rtw88/Kconfig
@@ -12,6 +12,7 @@ if RTW88
 
 config RTW88_CORE
 	tristate
+	select WANT_DEV_COREDUMP
 
 config RTW88_PCI
 	tristate
-- 
2.43.0

[PATCH AUTOSEL 6.10 032/197] l2tp: don't use tunnel socket sk_user_data in ppp procfs output

[Sasha Levin]

From: James Chapman <jchapman@katalix.com>

[ Upstream commit eeb11209e000797d555aefd642e24ed6f4e70140 ]

l2tp's ppp procfs output can be used to show internal state of
pppol2tp. It includes a 'user-data-ok' field, which is derived from
the tunnel socket's sk_user_data being non-NULL. Use tunnel->sock
being non-NULL to indicate this instead.

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/l2tp/l2tp_ppp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
index 6146e4e67bbb5..6ab8c47487161 100644
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -1511,7 +1511,7 @@ static void pppol2tp_seq_tunnel_show(struct seq_file *m, void *v)
 
 	seq_printf(m, "\nTUNNEL '%s', %c %d\n",
 		   tunnel->name,
-		   (tunnel == tunnel->sock->sk_user_data) ? 'Y' : 'N',
+		   tunnel->sock ? 'Y' : 'N',
 		   refcount_read(&tunnel->ref_count) - 1);
 	seq_printf(m, " %08x %ld/%ld/%ld %ld/%ld/%ld\n",
 		   0,
-- 
2.43.0

Re: [PATCH AUTOSEL 6.10 032/197] l2tp: don't use tunnel socket sk_user_data in ppp procfs output

[James Chapman]

On 25/09/2024 12:50, Sasha Levin wrote:
> From: James Chapman <jchapman@katalix.com>
> 
> [ Upstream commit eeb11209e000797d555aefd642e24ed6f4e70140 ]
> 
> l2tp's ppp procfs output can be used to show internal state of
> pppol2tp. It includes a 'user-data-ok' field, which is derived from
> the tunnel socket's sk_user_data being non-NULL. Use tunnel->sock
> being non-NULL to indicate this instead.
> 
> Signed-off-by: James Chapman <jchapman@katalix.com>
> Signed-off-by: Tom Parkin <tparkin@katalix.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   net/l2tp/l2tp_ppp.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
> index 6146e4e67bbb5..6ab8c47487161 100644
> --- a/net/l2tp/l2tp_ppp.c
> +++ b/net/l2tp/l2tp_ppp.c
> @@ -1511,7 +1511,7 @@ static void pppol2tp_seq_tunnel_show(struct seq_file *m, void *v)
>   
>   	seq_printf(m, "\nTUNNEL '%s', %c %d\n",
>   		   tunnel->name,
> -		   (tunnel == tunnel->sock->sk_user_data) ? 'Y' : 'N',
> +		   tunnel->sock ? 'Y' : 'N',
>   		   refcount_read(&tunnel->ref_count) - 1);
>   	seq_printf(m, " %08x %ld/%ld/%ld %ld/%ld/%ld\n",
>   		   0,

This change isn't needed in 6.10. The commit was part of a series for 
6.12 that removed use of sk_user_data in l2tp tunnel sockets.

Re: [PATCH AUTOSEL 6.10 032/197] l2tp: don't use tunnel socket sk_user_data in ppp procfs output

[Sasha Levin]

On Wed, Sep 25, 2024 at 03:12:23PM +0100, James Chapman wrote:
>On 25/09/2024 12:50, Sasha Levin wrote:
>>From: James Chapman <jchapman@katalix.com>
>>
>>[ Upstream commit eeb11209e000797d555aefd642e24ed6f4e70140 ]
>>
>>l2tp's ppp procfs output can be used to show internal state of
>>pppol2tp. It includes a 'user-data-ok' field, which is derived from
>>the tunnel socket's sk_user_data being non-NULL. Use tunnel->sock
>>being non-NULL to indicate this instead.
>>
>>Signed-off-by: James Chapman <jchapman@katalix.com>
>>Signed-off-by: Tom Parkin <tparkin@katalix.com>
>>Signed-off-by: David S. Miller <davem@davemloft.net>
>>Signed-off-by: Sasha Levin <sashal@kernel.org>
>>---
>>  net/l2tp/l2tp_ppp.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>>diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c
>>index 6146e4e67bbb5..6ab8c47487161 100644
>>--- a/net/l2tp/l2tp_ppp.c
>>+++ b/net/l2tp/l2tp_ppp.c
>>@@ -1511,7 +1511,7 @@ static void pppol2tp_seq_tunnel_show(struct seq_file *m, void *v)
>>  	seq_printf(m, "\nTUNNEL '%s', %c %d\n",
>>  		   tunnel->name,
>>-		   (tunnel == tunnel->sock->sk_user_data) ? 'Y' : 'N',
>>+		   tunnel->sock ? 'Y' : 'N',
>>  		   refcount_read(&tunnel->ref_count) - 1);
>>  	seq_printf(m, " %08x %ld/%ld/%ld %ld/%ld/%ld\n",
>>  		   0,
>
>This change isn't needed in 6.10. The commit was part of a series for 
>6.12 that removed use of sk_user_data in l2tp tunnel sockets.

Dropped, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.10 033/197] ACPI: EC: Do not release locks during operation region accesses

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit dc171114926ec390ab90f46534545420ec03e458 ]

It is not particularly useful to release locks (the EC mutex and the
ACPI global lock, if present) and re-acquire them immediately thereafter
during EC address space accesses in acpi_ec_space_handler().

First, releasing them for a while before grabbing them again does not
really help anyone because there may not be enough time for another
thread to acquire them.

Second, if another thread successfully acquires them and carries out
a new EC write or read in the middle if an operation region access in
progress, it may confuse the EC firmware, especially after the burst
mode has been enabled.

Finally, manipulating the locks after writing or reading every single
byte of data is overhead that it is better to avoid.

Accordingly, modify the code to carry out EC address space accesses
entirely without releasing the locks.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/12473338.O9o76ZdvQC@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/ec.c | 55 +++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 49 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 38d2f6e6b12b4..25399f6dde7e2 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -783,6 +783,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec,
 	unsigned long tmp;
 	int ret = 0;
 
+	if (t->rdata)
+		memset(t->rdata, 0, t->rlen);
+
 	/* start transaction */
 	spin_lock_irqsave(&ec->lock, tmp);
 	/* Enable GPE for command processing (IBF=0/OBF=1) */
@@ -819,8 +822,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t)
 
 	if (!ec || (!t) || (t->wlen && !t->wdata) || (t->rlen && !t->rdata))
 		return -EINVAL;
-	if (t->rdata)
-		memset(t->rdata, 0, t->rlen);
 
 	mutex_lock(&ec->mutex);
 	if (ec->global_lock) {
@@ -847,7 +848,7 @@ static int acpi_ec_burst_enable(struct acpi_ec *ec)
 				.wdata = NULL, .rdata = &d,
 				.wlen = 0, .rlen = 1};
 
-	return acpi_ec_transaction(ec, &t);
+	return acpi_ec_transaction_unlocked(ec, &t);
 }
 
 static int acpi_ec_burst_disable(struct acpi_ec *ec)
@@ -857,7 +858,7 @@ static int acpi_ec_burst_disable(struct acpi_ec *ec)
 				.wlen = 0, .rlen = 0};
 
 	return (acpi_ec_read_status(ec) & ACPI_EC_FLAG_BURST) ?
-				acpi_ec_transaction(ec, &t) : 0;
+				acpi_ec_transaction_unlocked(ec, &t) : 0;
 }
 
 static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data)
@@ -873,6 +874,19 @@ static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data)
 	return result;
 }
 
+static int acpi_ec_read_unlocked(struct acpi_ec *ec, u8 address, u8 *data)
+{
+	int result;
+	u8 d;
+	struct transaction t = {.command = ACPI_EC_COMMAND_READ,
+				.wdata = &address, .rdata = &d,
+				.wlen = 1, .rlen = 1};
+
+	result = acpi_ec_transaction_unlocked(ec, &t);
+	*data = d;
+	return result;
+}
+
 static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data)
 {
 	u8 wdata[2] = { address, data };
@@ -883,6 +897,16 @@ static int acpi_ec_write(struct acpi_ec *ec, u8 address, u8 data)
 	return acpi_ec_transaction(ec, &t);
 }
 
+static int acpi_ec_write_unlocked(struct acpi_ec *ec, u8 address, u8 data)
+{
+	u8 wdata[2] = { address, data };
+	struct transaction t = {.command = ACPI_EC_COMMAND_WRITE,
+				.wdata = wdata, .rdata = NULL,
+				.wlen = 2, .rlen = 0};
+
+	return acpi_ec_transaction_unlocked(ec, &t);
+}
+
 int ec_read(u8 addr, u8 *val)
 {
 	int err;
@@ -1323,6 +1347,7 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address,
 	struct acpi_ec *ec = handler_context;
 	int result = 0, i, bytes = bits / 8;
 	u8 *value = (u8 *)value64;
+	u32 glk;
 
 	if ((address > 0xFF) || !value || !handler_context)
 		return AE_BAD_PARAMETER;
@@ -1330,13 +1355,25 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address,
 	if (function != ACPI_READ && function != ACPI_WRITE)
 		return AE_BAD_PARAMETER;
 
+	mutex_lock(&ec->mutex);
+
+	if (ec->global_lock) {
+		acpi_status status;
+
+		status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
+		if (ACPI_FAILURE(status)) {
+			result = -ENODEV;
+			goto unlock;
+		}
+	}
+
 	if (ec->busy_polling || bits > 8)
 		acpi_ec_burst_enable(ec);
 
 	for (i = 0; i < bytes; ++i, ++address, ++value) {
 		result = (function == ACPI_READ) ?
-			acpi_ec_read(ec, address, value) :
-			acpi_ec_write(ec, address, *value);
+			acpi_ec_read_unlocked(ec, address, value) :
+			acpi_ec_write_unlocked(ec, address, *value);
 		if (result < 0)
 			break;
 	}
@@ -1344,6 +1381,12 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address,
 	if (ec->busy_polling || bits > 8)
 		acpi_ec_burst_disable(ec);
 
+	if (ec->global_lock)
+		acpi_release_global_lock(glk);
+
+unlock:
+	mutex_unlock(&ec->mutex);
+
 	switch (result) {
 	case -EINVAL:
 		return AE_BAD_PARAMETER;
-- 
2.43.0

[PATCH AUTOSEL 6.10 034/197] ACPICA: check null return of ACPI_ALLOCATE_ZEROED() in acpi_db_convert_to_package()

[Sasha Levin]

From: Pei Xiao <xiaopei01@kylinos.cn>

[ Upstream commit a5242874488eba2b9062985bf13743c029821330 ]

ACPICA commit 4d4547cf13cca820ff7e0f859ba83e1a610b9fd0

ACPI_ALLOCATE_ZEROED() may fail, elements might be NULL and will cause
NULL pointer dereference later.

Link: https://github.com/acpica/acpica/commit/4d4547cf
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/tencent_4A21A2865B8B0A0D12CAEBEB84708EDDB505@qq.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/dbconvert.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/acpica/dbconvert.c b/drivers/acpi/acpica/dbconvert.c
index 2b84ac093698a..8dbab69320499 100644
--- a/drivers/acpi/acpica/dbconvert.c
+++ b/drivers/acpi/acpica/dbconvert.c
@@ -174,6 +174,8 @@ acpi_status acpi_db_convert_to_package(char *string, union acpi_object *object)
 	elements =
 	    ACPI_ALLOCATE_ZEROED(DB_DEFAULT_PKG_ELEMENTS *
 				 sizeof(union acpi_object));
+	if (!elements)
+		return (AE_NO_MEMORY);
 
 	this = string;
 	for (i = 0; i < (DB_DEFAULT_PKG_ELEMENTS - 1); i++) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 035/197] tipc: guard against string buffer overrun

[Sasha Levin]

From: Simon Horman <horms@kernel.org>

[ Upstream commit 6555a2a9212be6983d2319d65276484f7c5f431a ]

Smatch reports that copying media_name and if_name to name_parts may
overwrite the destination.

 .../bearer.c:166 bearer_name_validate() error: strcpy() 'media_name' too large for 'name_parts->media_name' (32 vs 16)
 .../bearer.c:167 bearer_name_validate() error: strcpy() 'if_name' too large for 'name_parts->if_name' (1010102 vs 16)

This does seem to be the case so guard against this possibility by using
strscpy() and failing if truncation occurs.

Introduced by commit b97bf3fd8f6a ("[TIPC] Initial merge")

Compile tested only.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240801-tipic-overrun-v2-1-c5b869d1f074@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tipc/bearer.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 5a526ebafeb4b..3c9e25f6a1d22 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -163,8 +163,12 @@ static int bearer_name_validate(const char *name,
 
 	/* return bearer name components, if necessary */
 	if (name_parts) {
-		strcpy(name_parts->media_name, media_name);
-		strcpy(name_parts->if_name, if_name);
+		if (strscpy(name_parts->media_name, media_name,
+			    TIPC_MAX_MEDIA_NAME) < 0)
+			return 0;
+		if (strscpy(name_parts->if_name, if_name,
+			    TIPC_MAX_IF_NAME) < 0)
+			return 0;
 	}
 	return 1;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 036/197] net: mvpp2: Increase size of queue_name buffer

[Sasha Levin]

From: Simon Horman <horms@kernel.org>

[ Upstream commit 91d516d4de48532d967a77967834e00c8c53dfe6 ]

Increase size of queue_name buffer from 30 to 31 to accommodate
the largest string written to it. This avoids truncation in
the possibly unlikely case where the string is name is the
maximum size.

Flagged by gcc-14:

  .../mvpp2_main.c: In function 'mvpp2_probe':
  .../mvpp2_main.c:7636:32: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
   7636 |                  "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev),
        |                                ^
  .../mvpp2_main.c:7635:9: note: 'snprintf' output between 10 and 31 bytes into a destination of size 30
   7635 |         snprintf(priv->queue_name, sizeof(priv->queue_name),
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   7636 |                  "stats-wq-%s%s", netdev_name(priv->port_list[0]->dev),
        |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   7637 |                  priv->port_count > 1 ? "+" : "");
        |                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Introduced by commit 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics").
I am not flagging this as a bug as I am not aware that it is one.

Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>
Link: https://patch.msgid.link/20240806-mvpp2-namelen-v1-1-6dc773653f2f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index e809f91c08fb9..9e02e4367bec8 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -1088,7 +1088,7 @@ struct mvpp2 {
 	unsigned int max_port_rxqs;
 
 	/* Workqueue to gather hardware statistics */
-	char queue_name[30];
+	char queue_name[31];
 	struct workqueue_struct *stats_queue;
 
 	/* Debugfs root entry */
-- 
2.43.0

[PATCH AUTOSEL 6.10 037/197] bnxt_en: Extend maximum length of version string by 1 byte

[Sasha Levin]

From: Simon Horman <horms@kernel.org>

[ Upstream commit ffff7ee843c351ce71d6e0d52f0f20bea35e18c9 ]

This corrects an out-by-one error in the maximum length of the package
version string. The size argument of snprintf includes space for the
trailing '\0' byte, so there is no need to allow extra space for it by
reducing the value of the size argument by 1.

Found by inspection.
Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240813-bnxt-str-v2-1-872050a157e7@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 79c09c1cdf936..0032c4ebd7e12 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -4146,7 +4146,7 @@ static void bnxt_get_pkgver(struct net_device *dev)
 
 	if (!bnxt_get_pkginfo(dev, buf, sizeof(buf))) {
 		len = strlen(bp->fw_ver_str);
-		snprintf(bp->fw_ver_str + len, FW_VER_STR_LEN - len - 1,
+		snprintf(bp->fw_ver_str + len, FW_VER_STR_LEN - len,
 			 "/pkg %s", buf);
 	}
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 038/197] ipv4: Check !in_dev earlier for ioctl(SIOCSIFADDR).

[Sasha Levin]

From: Kuniyuki Iwashima <kuniyu@amazon.com>

[ Upstream commit e3af3d3c5b26c33a7950e34e137584f6056c4319 ]

dev->ip_ptr could be NULL if we set an invalid MTU.

Even then, if we issue ioctl(SIOCSIFADDR) for a new IPv4 address,
devinet_ioctl() allocates struct in_ifaddr and fails later in
inet_set_ifa() because in_dev is NULL.

Let's move the check earlier.

Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240809235406.50187-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/devinet.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index d09f557eaa779..73effd2d2994a 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -574,10 +574,6 @@ static int inet_set_ifa(struct net_device *dev, struct in_ifaddr *ifa)
 
 	ASSERT_RTNL();
 
-	if (!in_dev) {
-		inet_free_ifa(ifa);
-		return -ENOBUFS;
-	}
 	ipv4_devconf_setall(in_dev);
 	neigh_parms_data_state_setall(in_dev->arp_parms);
 	if (ifa->ifa_dev != in_dev) {
@@ -1184,6 +1180,8 @@ int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr)
 
 		if (!ifa) {
 			ret = -ENOBUFS;
+			if (!in_dev)
+				break;
 			ifa = inet_alloc_ifa();
 			if (!ifa)
 				break;
-- 
2.43.0

[PATCH AUTOSEL 6.10 039/197] wifi: rtw89: correct base HT rate mask for firmware

[Sasha Levin]

From: Ping-Ke Shih <pkshih@realtek.com>

[ Upstream commit 45742881f9eee2a4daeb6008e648a460dd3742cd ]

Coverity reported that u8 rx_mask << 24 will become signed 32 bits, which
casting to unsigned 64 bits will do sign extension. For example,
putting 0x80000000 (signed 32 bits) to a u64 variable will become
0xFFFFFFFF_80000000.

The real case we meet is:
  rx_mask[0...3] = ff ff 00 00
  ra_mask = 0xffffffff_ff0ff000

After this fix:
  rx_mask[0...3] = ff ff 00 00
  ra_mask = 0x00000000_ff0ff000

Fortunately driver does bitwise-AND with incorrect ra_mask and supported
rates (1ss and 2ss rate only) afterward, so the final rate mask of
original code is still correct.

Addresses-Coverity-ID: 1504762 ("Unintended sign extension")

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809072012.84152-5-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw89/phy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c
index a82b4c56a6f45..f7c6b019b5be4 100644
--- a/drivers/net/wireless/realtek/rtw89/phy.c
+++ b/drivers/net/wireless/realtek/rtw89/phy.c
@@ -352,8 +352,8 @@ static void rtw89_phy_ra_sta_update(struct rtw89_dev *rtwdev,
 		csi_mode = RTW89_RA_RPT_MODE_HT;
 		ra_mask |= ((u64)sta->deflink.ht_cap.mcs.rx_mask[3] << 48) |
 			   ((u64)sta->deflink.ht_cap.mcs.rx_mask[2] << 36) |
-			   (sta->deflink.ht_cap.mcs.rx_mask[1] << 24) |
-			   (sta->deflink.ht_cap.mcs.rx_mask[0] << 12);
+			   ((u64)sta->deflink.ht_cap.mcs.rx_mask[1] << 24) |
+			   ((u64)sta->deflink.ht_cap.mcs.rx_mask[0] << 12);
 		high_rate_masks = rtw89_ra_mask_ht_rates;
 		if (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)
 			stbc_en = 1;
-- 
2.43.0

[PATCH AUTOSEL 6.10 040/197] netfilter: nf_tables: don't initialize registers in nft_do_chain()

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit c88baabf16d1ef74ab8832de9761226406af5507 ]

revert commit 4c905f6740a3 ("netfilter: nf_tables: initialize registers in
nft_do_chain()").

Previous patch makes sure that loads from uninitialized registers are
detected from the control plane. in this case rule blob auto-zeroes
registers.  Thus the explicit zeroing is not needed anymore.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_tables_core.c b/net/netfilter/nf_tables_core.c
index a48d5f0e2f3e1..75598520b0fa0 100644
--- a/net/netfilter/nf_tables_core.c
+++ b/net/netfilter/nf_tables_core.c
@@ -256,7 +256,7 @@ nft_do_chain(struct nft_pktinfo *pkt, void *priv)
 	const struct net *net = nft_net(pkt);
 	const struct nft_expr *expr, *last;
 	const struct nft_rule_dp *rule;
-	struct nft_regs regs = {};
+	struct nft_regs regs;
 	unsigned int stackptr = 0;
 	struct nft_jumpstack jumpstack[NFT_JUMP_STACK_SIZE];
 	bool genbit = READ_ONCE(net->nft.gencursor);
-- 
2.43.0

[PATCH AUTOSEL 6.10 041/197] ipv4: Mask upper DSCP bits and ECN bits in NETLINK_FIB_LOOKUP family

[Sasha Levin]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit 8fed54758cd248cd311a2b5c1e180abef1866237 ]

The NETLINK_FIB_LOOKUP netlink family can be used to perform a FIB
lookup according to user provided parameters and communicate the result
back to user space.

However, unlike other users of the FIB lookup API, the upper DSCP bits
and the ECN bits of the DS field are not masked, which can result in the
wrong result being returned.

Solve this by masking the upper DSCP bits and the ECN bits using
IPTOS_RT_MASK.

The structure that communicates the request and the response is not
exported to user space, so it is unlikely that this netlink family is
actually in use [1].

[1] https://lore.kernel.org/netdev/ZpqpB8vJU%2FQ6LSqa@debian/

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/fib_frontend.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 7ad2cafb92763..da540ddb7af65 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -1343,7 +1343,7 @@ static void nl_fib_lookup(struct net *net, struct fib_result_nl *frn)
 	struct flowi4           fl4 = {
 		.flowi4_mark = frn->fl_mark,
 		.daddr = frn->fl_addr,
-		.flowi4_tos = frn->fl_tos,
+		.flowi4_tos = frn->fl_tos & IPTOS_RT_MASK,
 		.flowi4_scope = frn->fl_scope,
 	};
 	struct fib_table *tb;
-- 
2.43.0

[PATCH AUTOSEL 6.10 042/197] nvme-keyring: restrict match length for version '1' identifiers

[Sasha Levin]

From: Hannes Reinecke <hare@kernel.org>

[ Upstream commit 79559c75332458985ab8a21f11b08bf7c9b833b0 ]

TP8018 introduced a new TLS PSK identifier version (version 1), which appended
a PSK hash value to the existing identifier (cf NVMe TCP specification v1.1,
section 3.6.1.3 'TLS PSK and PSK Identity Derivation').
An original (version 0) identifier has the form:

NVMe0<type><hmac> <hostnqn> <subsysnqn>

and a version 1 identifier has the form:

NVMe1<type><hmac> <hostnqn> <subsysnqn> <hash>

This patch modifies the lookup algorthm to compare only the first part
of the identifier (excluding the hash value) to handle both version 0 and
version 1 identifiers.
And the spec declares 'version 0' identifiers obsolete, so the lookup
algorithm is modified to prever v1 identifiers.

Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/common/keyring.c | 36 +++++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/nvme/common/keyring.c b/drivers/nvme/common/keyring.c
index 6f7e7a8fa5ae4..05e89307c8aa3 100644
--- a/drivers/nvme/common/keyring.c
+++ b/drivers/nvme/common/keyring.c
@@ -36,14 +36,12 @@ static bool nvme_tls_psk_match(const struct key *key,
 		pr_debug("%s: no key description\n", __func__);
 		return false;
 	}
-	match_len = strlen(key->description);
-	pr_debug("%s: id %s len %zd\n", __func__, key->description, match_len);
-
 	if (!match_data->raw_data) {
 		pr_debug("%s: no match data\n", __func__);
 		return false;
 	}
 	match_id = match_data->raw_data;
+	match_len = strlen(match_id);
 	pr_debug("%s: match '%s' '%s' len %zd\n",
 		 __func__, match_id, key->description, match_len);
 	return !memcmp(key->description, match_id, match_len);
@@ -71,7 +69,7 @@ static struct key_type nvme_tls_psk_key_type = {
 
 static struct key *nvme_tls_psk_lookup(struct key *keyring,
 		const char *hostnqn, const char *subnqn,
-		int hmac, bool generated)
+		u8 hmac, u8 psk_ver, bool generated)
 {
 	char *identity;
 	size_t identity_len = (NVMF_NQN_SIZE) * 2 + 11;
@@ -82,8 +80,8 @@ static struct key *nvme_tls_psk_lookup(struct key *keyring,
 	if (!identity)
 		return ERR_PTR(-ENOMEM);
 
-	snprintf(identity, identity_len, "NVMe0%c%02d %s %s",
-		 generated ? 'G' : 'R', hmac, hostnqn, subnqn);
+	snprintf(identity, identity_len, "NVMe%u%c%02u %s %s",
+		 psk_ver, generated ? 'G' : 'R', hmac, hostnqn, subnqn);
 
 	if (!keyring)
 		keyring = nvme_keyring;
@@ -107,21 +105,38 @@ static struct key *nvme_tls_psk_lookup(struct key *keyring,
 /*
  * NVMe PSK priority list
  *
- * 'Retained' PSKs (ie 'generated == false')
- * should be preferred to 'generated' PSKs,
- * and SHA-384 should be preferred to SHA-256.
+ * 'Retained' PSKs (ie 'generated == false') should be preferred to 'generated'
+ * PSKs, PSKs with hash (psk_ver 1) should be preferred to PSKs without hash
+ * (psk_ver 0), and SHA-384 should be preferred to SHA-256.
  */
 static struct nvme_tls_psk_priority_list {
 	bool generated;
+	u8 psk_ver;
 	enum nvme_tcp_tls_cipher cipher;
 } nvme_tls_psk_prio[] = {
 	{ .generated = false,
+	  .psk_ver = 1,
+	  .cipher = NVME_TCP_TLS_CIPHER_SHA384, },
+	{ .generated = false,
+	  .psk_ver = 1,
+	  .cipher = NVME_TCP_TLS_CIPHER_SHA256, },
+	{ .generated = false,
+	  .psk_ver = 0,
 	  .cipher = NVME_TCP_TLS_CIPHER_SHA384, },
 	{ .generated = false,
+	  .psk_ver = 0,
+	  .cipher = NVME_TCP_TLS_CIPHER_SHA256, },
+	{ .generated = true,
+	  .psk_ver = 1,
+	  .cipher = NVME_TCP_TLS_CIPHER_SHA384, },
+	{ .generated = true,
+	  .psk_ver = 1,
 	  .cipher = NVME_TCP_TLS_CIPHER_SHA256, },
 	{ .generated = true,
+	  .psk_ver = 0,
 	  .cipher = NVME_TCP_TLS_CIPHER_SHA384, },
 	{ .generated = true,
+	  .psk_ver = 0,
 	  .cipher = NVME_TCP_TLS_CIPHER_SHA256, },
 };
 
@@ -137,10 +152,11 @@ key_serial_t nvme_tls_psk_default(struct key *keyring,
 
 	for (prio = 0; prio < ARRAY_SIZE(nvme_tls_psk_prio); prio++) {
 		bool generated = nvme_tls_psk_prio[prio].generated;
+		u8 ver = nvme_tls_psk_prio[prio].psk_ver;
 		enum nvme_tcp_tls_cipher cipher = nvme_tls_psk_prio[prio].cipher;
 
 		tls_key = nvme_tls_psk_lookup(keyring, hostnqn, subnqn,
-					      cipher, generated);
+					      cipher, ver, generated);
 		if (!IS_ERR(tls_key)) {
 			tls_key_id = tls_key->serial;
 			key_put(tls_key);
-- 
2.43.0

[PATCH AUTOSEL 6.10 043/197] nvme-tcp: sanitize TLS key handling

[Sasha Levin]

From: Hannes Reinecke <hare@kernel.org>

[ Upstream commit 363895767fbfa05891b0b4d9e06ebde7a10c6a07 ]

There is a difference between TLS configured (ie the user has
provisioned/requested a key) and TLS enabled (ie the connection
is encrypted with TLS). This becomes important for secure concatenation,
where the initial authentication is run on an unencrypted connection
(ie with TLS configured, but not enabled), and then the queue is reset to
run over TLS (ie TLS configured _and_ enabled).
So to differentiate between those two states store the generated
key in opts->tls_key (as we're using the same TLS key for all queues),
the key serial of the resulting TLS handshake in ctrl->tls_pskid
(to signal that TLS on the admin queue is enabled), and a simple
flag for the queues to indicated that TLS has been enabled.

Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c  |  1 -
 drivers/nvme/host/nvme.h  |  2 +-
 drivers/nvme/host/sysfs.c |  4 +--
 drivers/nvme/host/tcp.c   | 53 +++++++++++++++++++++++++++++----------
 4 files changed, 43 insertions(+), 17 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 5569cf4183b2a..415ede9886c12 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -4587,7 +4587,6 @@ static void nvme_free_ctrl(struct device *dev)
 
 	if (!subsys || ctrl->instance != subsys->instance)
 		ida_free(&nvme_instance_ida, ctrl->instance);
-	key_put(ctrl->tls_key);
 	nvme_free_cels(ctrl);
 	nvme_mpath_uninit(ctrl);
 	cleanup_srcu_struct(&ctrl->srcu);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index ff1769172778b..cde1cb906dbf2 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -375,7 +375,7 @@ struct nvme_ctrl {
 	struct nvme_dhchap_key *ctrl_key;
 	u16 transaction;
 #endif
-	struct key *tls_key;
+	key_serial_t tls_pskid;
 
 	/* Power saving configuration */
 	u64 ps_max_latency_us;
diff --git a/drivers/nvme/host/sysfs.c b/drivers/nvme/host/sysfs.c
index 3c55f7edd1819..5b1dee8a66ef8 100644
--- a/drivers/nvme/host/sysfs.c
+++ b/drivers/nvme/host/sysfs.c
@@ -671,9 +671,9 @@ static ssize_t tls_key_show(struct device *dev,
 {
 	struct nvme_ctrl *ctrl = dev_get_drvdata(dev);
 
-	if (!ctrl->tls_key)
+	if (!ctrl->tls_pskid)
 		return 0;
-	return sysfs_emit(buf, "%08x", key_serial(ctrl->tls_key));
+	return sysfs_emit(buf, "%08x", ctrl->tls_pskid);
 }
 static DEVICE_ATTR_RO(tls_key);
 #endif
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 8b5e4327fe83b..f551609691807 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -165,6 +165,7 @@ struct nvme_tcp_queue {
 
 	bool			hdr_digest;
 	bool			data_digest;
+	bool			tls_enabled;
 	struct ahash_request	*rcv_hash;
 	struct ahash_request	*snd_hash;
 	__le32			exp_ddgst;
@@ -213,7 +214,21 @@ static inline int nvme_tcp_queue_id(struct nvme_tcp_queue *queue)
 	return queue - queue->ctrl->queues;
 }
 
-static inline bool nvme_tcp_tls(struct nvme_ctrl *ctrl)
+/*
+ * Check if the queue is TLS encrypted
+ */
+static inline bool nvme_tcp_queue_tls(struct nvme_tcp_queue *queue)
+{
+	if (!IS_ENABLED(CONFIG_NVME_TCP_TLS))
+		return 0;
+
+	return queue->tls_enabled;
+}
+
+/*
+ * Check if TLS is configured for the controller.
+ */
+static inline bool nvme_tcp_tls_configured(struct nvme_ctrl *ctrl)
 {
 	if (!IS_ENABLED(CONFIG_NVME_TCP_TLS))
 		return 0;
@@ -368,7 +383,7 @@ static inline bool nvme_tcp_queue_has_pending(struct nvme_tcp_queue *queue)
 
 static inline bool nvme_tcp_queue_more(struct nvme_tcp_queue *queue)
 {
-	return !nvme_tcp_tls(&queue->ctrl->ctrl) &&
+	return !nvme_tcp_queue_tls(queue) &&
 		nvme_tcp_queue_has_pending(queue);
 }
 
@@ -1427,7 +1442,7 @@ static int nvme_tcp_init_connection(struct nvme_tcp_queue *queue)
 	memset(&msg, 0, sizeof(msg));
 	iov.iov_base = icresp;
 	iov.iov_len = sizeof(*icresp);
-	if (nvme_tcp_tls(&queue->ctrl->ctrl)) {
+	if (nvme_tcp_queue_tls(queue)) {
 		msg.msg_control = cbuf;
 		msg.msg_controllen = sizeof(cbuf);
 	}
@@ -1439,7 +1454,7 @@ static int nvme_tcp_init_connection(struct nvme_tcp_queue *queue)
 		goto free_icresp;
 	}
 	ret = -ENOTCONN;
-	if (nvme_tcp_tls(&queue->ctrl->ctrl)) {
+	if (nvme_tcp_queue_tls(queue)) {
 		ctype = tls_get_record_type(queue->sock->sk,
 					    (struct cmsghdr *)cbuf);
 		if (ctype != TLS_RECORD_TYPE_DATA) {
@@ -1587,7 +1602,10 @@ static void nvme_tcp_tls_done(void *data, int status, key_serial_t pskid)
 			 qid, pskid);
 		queue->tls_err = -ENOKEY;
 	} else {
-		ctrl->ctrl.tls_key = tls_key;
+		queue->tls_enabled = true;
+		if (qid == 0)
+			ctrl->ctrl.tls_pskid = key_serial(tls_key);
+		key_put(tls_key);
 		queue->tls_err = 0;
 	}
 
@@ -1768,7 +1786,7 @@ static int nvme_tcp_alloc_queue(struct nvme_ctrl *nctrl, int qid,
 	}
 
 	/* If PSKs are configured try to start TLS */
-	if (IS_ENABLED(CONFIG_NVME_TCP_TLS) && pskid) {
+	if (nvme_tcp_tls_configured(nctrl) && pskid) {
 		ret = nvme_tcp_start_tls(nctrl, queue, pskid);
 		if (ret)
 			goto err_init_connect;
@@ -1829,6 +1847,8 @@ static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
 	mutex_lock(&queue->queue_lock);
 	if (test_and_clear_bit(NVME_TCP_Q_LIVE, &queue->flags))
 		__nvme_tcp_stop_queue(queue);
+	/* Stopping the queue will disable TLS */
+	queue->tls_enabled = false;
 	mutex_unlock(&queue->queue_lock);
 }
 
@@ -1925,16 +1945,17 @@ static int nvme_tcp_alloc_admin_queue(struct nvme_ctrl *ctrl)
 	int ret;
 	key_serial_t pskid = 0;
 
-	if (nvme_tcp_tls(ctrl)) {
+	if (nvme_tcp_tls_configured(ctrl)) {
 		if (ctrl->opts->tls_key)
 			pskid = key_serial(ctrl->opts->tls_key);
-		else
+		else {
 			pskid = nvme_tls_psk_default(ctrl->opts->keyring,
 						      ctrl->opts->host->nqn,
 						      ctrl->opts->subsysnqn);
-		if (!pskid) {
-			dev_err(ctrl->device, "no valid PSK found\n");
-			return -ENOKEY;
+			if (!pskid) {
+				dev_err(ctrl->device, "no valid PSK found\n");
+				return -ENOKEY;
+			}
 		}
 	}
 
@@ -1957,13 +1978,14 @@ static int __nvme_tcp_alloc_io_queues(struct nvme_ctrl *ctrl)
 {
 	int i, ret;
 
-	if (nvme_tcp_tls(ctrl) && !ctrl->tls_key) {
+	if (nvme_tcp_tls_configured(ctrl) && !ctrl->tls_pskid) {
 		dev_err(ctrl->device, "no PSK negotiated\n");
 		return -ENOKEY;
 	}
+
 	for (i = 1; i < ctrl->queue_count; i++) {
 		ret = nvme_tcp_alloc_queue(ctrl, i,
-				key_serial(ctrl->tls_key));
+				ctrl->tls_pskid);
 		if (ret)
 			goto out_free_queues;
 	}
@@ -2144,6 +2166,11 @@ static void nvme_tcp_teardown_admin_queue(struct nvme_ctrl *ctrl,
 	if (remove)
 		nvme_unquiesce_admin_queue(ctrl);
 	nvme_tcp_destroy_admin_queue(ctrl, remove);
+	if (ctrl->tls_pskid) {
+		dev_dbg(ctrl->device, "Wipe negotiated TLS_PSK %08x\n",
+			ctrl->tls_pskid);
+		ctrl->tls_pskid = 0;
+	}
 }
 
 static void nvme_tcp_teardown_io_queues(struct nvme_ctrl *ctrl,
-- 
2.43.0

[PATCH AUTOSEL 6.10 044/197] nvme-tcp: check for invalidated or revoked key

[Sasha Levin]

From: Hannes Reinecke <hare@kernel.org>

[ Upstream commit 5bc46b49c828a6dfaab80b71ecb63fe76a1096d2 ]

key_lookup() will always return a key, even if that key is revoked
or invalidated. So check for invalid keys before continuing.

Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/common/keyring.c | 22 ++++++++++++++++++++++
 drivers/nvme/host/Kconfig     |  1 +
 drivers/nvme/host/fabrics.c   |  2 +-
 drivers/nvme/host/tcp.c       |  2 +-
 include/linux/nvme-keyring.h  |  6 +++++-
 5 files changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/common/keyring.c b/drivers/nvme/common/keyring.c
index 05e89307c8aa3..ed5167f942d89 100644
--- a/drivers/nvme/common/keyring.c
+++ b/drivers/nvme/common/keyring.c
@@ -20,6 +20,28 @@ key_serial_t nvme_keyring_id(void)
 }
 EXPORT_SYMBOL_GPL(nvme_keyring_id);
 
+static bool nvme_tls_psk_revoked(struct key *psk)
+{
+	return test_bit(KEY_FLAG_REVOKED, &psk->flags) ||
+		test_bit(KEY_FLAG_INVALIDATED, &psk->flags);
+}
+
+struct key *nvme_tls_key_lookup(key_serial_t key_id)
+{
+	struct key *key = key_lookup(key_id);
+
+	if (IS_ERR(key)) {
+		pr_err("key id %08x not found\n", key_id);
+		return key;
+	}
+	if (nvme_tls_psk_revoked(key)) {
+		pr_err("key id %08x revoked\n", key_id);
+		return ERR_PTR(-EKEYREVOKED);
+	}
+	return key;
+}
+EXPORT_SYMBOL_GPL(nvme_tls_key_lookup);
+
 static void nvme_tls_psk_describe(const struct key *key, struct seq_file *m)
 {
 	seq_puts(m, key->description);
diff --git a/drivers/nvme/host/Kconfig b/drivers/nvme/host/Kconfig
index b309c8be720f4..854eb26ac3db9 100644
--- a/drivers/nvme/host/Kconfig
+++ b/drivers/nvme/host/Kconfig
@@ -110,6 +110,7 @@ config NVME_HOST_AUTH
 	bool "NVMe over Fabrics In-Band Authentication in host side"
 	depends on NVME_CORE
 	select NVME_AUTH
+	select NVME_KEYRING if NVME_TCP_TLS
 	help
 	  This provides support for NVMe over Fabrics In-Band Authentication in
 	  host side.
diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c
index b5a4b5fd573e0..3e3db6a6524e0 100644
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -650,7 +650,7 @@ static struct key *nvmf_parse_key(int key_id)
 		return ERR_PTR(-EINVAL);
 	}
 
-	key = key_lookup(key_id);
+	key = nvme_tls_key_lookup(key_id);
 	if (IS_ERR(key))
 		pr_err("key id %08x not found\n", key_id);
 	else
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index f551609691807..8c79af3ed1f23 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -1596,7 +1596,7 @@ static void nvme_tcp_tls_done(void *data, int status, key_serial_t pskid)
 		goto out_complete;
 	}
 
-	tls_key = key_lookup(pskid);
+	tls_key = nvme_tls_key_lookup(pskid);
 	if (IS_ERR(tls_key)) {
 		dev_warn(ctrl->ctrl.device, "queue %d: Invalid key %x\n",
 			 qid, pskid);
diff --git a/include/linux/nvme-keyring.h b/include/linux/nvme-keyring.h
index e10333d78dbbe..19d2b256180fd 100644
--- a/include/linux/nvme-keyring.h
+++ b/include/linux/nvme-keyring.h
@@ -12,7 +12,7 @@ key_serial_t nvme_tls_psk_default(struct key *keyring,
 		const char *hostnqn, const char *subnqn);
 
 key_serial_t nvme_keyring_id(void);
-
+struct key *nvme_tls_key_lookup(key_serial_t key_id);
 #else
 
 static inline key_serial_t nvme_tls_psk_default(struct key *keyring,
@@ -24,5 +24,9 @@ static inline key_serial_t nvme_keyring_id(void)
 {
 	return 0;
 }
+static inline struct key *nvme_tls_key_lookup(key_serial_t key_id)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
 #endif /* !CONFIG_NVME_KEYRING */
 #endif /* _NVME_KEYRING_H */
-- 
2.43.0

[PATCH AUTOSEL 6.10 045/197] net: atlantic: Avoid warning about potential string truncation

[Sasha Levin]

From: Simon Horman <horms@kernel.org>

[ Upstream commit 5874e0c9f25661c2faefe4809907166defae3d7f ]

W=1 builds with GCC 14.2.0 warn that:

.../aq_ethtool.c:278:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 6 [-Wformat-truncation=]
  278 |                                 snprintf(tc_string, 8, "TC%d ", tc);
      |                                                           ^~
.../aq_ethtool.c:278:56: note: directive argument in the range [-2147483641, 254]
  278 |                                 snprintf(tc_string, 8, "TC%d ", tc);
      |                                                        ^~~~~~~
.../aq_ethtool.c:278:33: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
  278 |                                 snprintf(tc_string, 8, "TC%d ", tc);
      |                                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

tc is always in the range 0 - cfg->tcs. And as cfg->tcs is a u8,
the range is 0 - 255. Further, on inspecting the code, it seems
that cfg->tcs will never be more than AQ_CFG_TCS_MAX (8), so
the range is actually 0 - 8.

So, it seems that the condition that GCC flags will not occur.
But, nonetheless, it would be nice if it didn't emit the warning.

It seems that this can be achieved by changing the format specifier
from %d to %u, in which case I believe GCC recognises an upper bound
on the range of tc of 0 - 255. After some experimentation I think
this is due to the combination of the use of %u and the type of
cfg->tcs (u8).

Empirically, updating the type of the tc variable to unsigned int
has the same effect.

As both of these changes seem to make sense in relation to what the code
is actually doing - iterating over unsigned values - do both.

Compile tested only.

Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821-atlantic-str-v1-1-fa2cfe38ca00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
index a2606ee3b0a56..cfc413caf93f4 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c
@@ -266,7 +266,7 @@ static void aq_ethtool_get_strings(struct net_device *ndev,
 		const int rx_stat_cnt = ARRAY_SIZE(aq_ethtool_queue_rx_stat_names);
 		const int tx_stat_cnt = ARRAY_SIZE(aq_ethtool_queue_tx_stat_names);
 		char tc_string[8];
-		int tc;
+		unsigned int tc;
 
 		memset(tc_string, 0, sizeof(tc_string));
 		memcpy(p, aq_ethtool_stat_names,
@@ -275,7 +275,7 @@ static void aq_ethtool_get_strings(struct net_device *ndev,
 
 		for (tc = 0; tc < cfg->tcs; tc++) {
 			if (cfg->is_qos)
-				snprintf(tc_string, 8, "TC%d ", tc);
+				snprintf(tc_string, 8, "TC%u ", tc);
 
 			for (i = 0; i < cfg->vecs; i++) {
 				for (si = 0; si < rx_stat_cnt; si++) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 046/197] crypto: simd - Do not call crypto_alloc_tfm during registration

[Sasha Levin]

From: Herbert Xu <herbert@gondor.apana.org.au>

[ Upstream commit 3c44d31cb34ce4eb8311a2e73634d57702948230 ]

Algorithm registration is usually carried out during module init,
where as little work as possible should be carried out.  The SIMD
code violated this rule by allocating a tfm, this then triggers a
full test of the algorithm which may dead-lock in certain cases.

SIMD is only allocating the tfm to get at the alg object, which is
in fact already available as it is what we are registering.  Use
that directly and remove the crypto_alloc_tfm call.

Also remove some obsolete and unused SIMD API.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/crypto/aes-ce-glue.c     |  2 +-
 arch/arm/crypto/aes-neonbs-glue.c |  2 +-
 crypto/simd.c                     | 76 ++++++-------------------------
 include/crypto/internal/simd.h    | 12 +----
 4 files changed, 19 insertions(+), 73 deletions(-)

diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c
index b668c97663ec0..f5b66f4cf45d9 100644
--- a/arch/arm/crypto/aes-ce-glue.c
+++ b/arch/arm/crypto/aes-ce-glue.c
@@ -711,7 +711,7 @@ static int __init aes_init(void)
 		algname = aes_algs[i].base.cra_name + 2;
 		drvname = aes_algs[i].base.cra_driver_name + 2;
 		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(algname, drvname, basename);
+		simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename);
 		err = PTR_ERR(simd);
 		if (IS_ERR(simd))
 			goto unregister_simds;
diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c
index f00f042ef3570..0ca94b90bc4ec 100644
--- a/arch/arm/crypto/aes-neonbs-glue.c
+++ b/arch/arm/crypto/aes-neonbs-glue.c
@@ -539,7 +539,7 @@ static int __init aes_init(void)
 		algname = aes_algs[i].base.cra_name + 2;
 		drvname = aes_algs[i].base.cra_driver_name + 2;
 		basename = aes_algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(algname, drvname, basename);
+		simd = simd_skcipher_create_compat(aes_algs + i, algname, drvname, basename);
 		err = PTR_ERR(simd);
 		if (IS_ERR(simd))
 			goto unregister_simds;
diff --git a/crypto/simd.c b/crypto/simd.c
index edaa479a1ec5e..d109866641a26 100644
--- a/crypto/simd.c
+++ b/crypto/simd.c
@@ -136,27 +136,19 @@ static int simd_skcipher_init(struct crypto_skcipher *tfm)
 	return 0;
 }
 
-struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname,
+struct simd_skcipher_alg *simd_skcipher_create_compat(struct skcipher_alg *ialg,
+						      const char *algname,
 						      const char *drvname,
 						      const char *basename)
 {
 	struct simd_skcipher_alg *salg;
-	struct crypto_skcipher *tfm;
-	struct skcipher_alg *ialg;
 	struct skcipher_alg *alg;
 	int err;
 
-	tfm = crypto_alloc_skcipher(basename, CRYPTO_ALG_INTERNAL,
-				    CRYPTO_ALG_INTERNAL | CRYPTO_ALG_ASYNC);
-	if (IS_ERR(tfm))
-		return ERR_CAST(tfm);
-
-	ialg = crypto_skcipher_alg(tfm);
-
 	salg = kzalloc(sizeof(*salg), GFP_KERNEL);
 	if (!salg) {
 		salg = ERR_PTR(-ENOMEM);
-		goto out_put_tfm;
+		goto out;
 	}
 
 	salg->ialg_name = basename;
@@ -195,30 +187,16 @@ struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname,
 	if (err)
 		goto out_free_salg;
 
-out_put_tfm:
-	crypto_free_skcipher(tfm);
+out:
 	return salg;
 
 out_free_salg:
 	kfree(salg);
 	salg = ERR_PTR(err);
-	goto out_put_tfm;
+	goto out;
 }
 EXPORT_SYMBOL_GPL(simd_skcipher_create_compat);
 
-struct simd_skcipher_alg *simd_skcipher_create(const char *algname,
-					       const char *basename)
-{
-	char drvname[CRYPTO_MAX_ALG_NAME];
-
-	if (snprintf(drvname, CRYPTO_MAX_ALG_NAME, "simd-%s", basename) >=
-	    CRYPTO_MAX_ALG_NAME)
-		return ERR_PTR(-ENAMETOOLONG);
-
-	return simd_skcipher_create_compat(algname, drvname, basename);
-}
-EXPORT_SYMBOL_GPL(simd_skcipher_create);
-
 void simd_skcipher_free(struct simd_skcipher_alg *salg)
 {
 	crypto_unregister_skcipher(&salg->alg);
@@ -246,7 +224,7 @@ int simd_register_skciphers_compat(struct skcipher_alg *algs, int count,
 		algname = algs[i].base.cra_name + 2;
 		drvname = algs[i].base.cra_driver_name + 2;
 		basename = algs[i].base.cra_driver_name;
-		simd = simd_skcipher_create_compat(algname, drvname, basename);
+		simd = simd_skcipher_create_compat(algs + i, algname, drvname, basename);
 		err = PTR_ERR(simd);
 		if (IS_ERR(simd))
 			goto err_unregister;
@@ -383,27 +361,19 @@ static int simd_aead_init(struct crypto_aead *tfm)
 	return 0;
 }
 
-struct simd_aead_alg *simd_aead_create_compat(const char *algname,
-					      const char *drvname,
-					      const char *basename)
+static struct simd_aead_alg *simd_aead_create_compat(struct aead_alg *ialg,
+						     const char *algname,
+						     const char *drvname,
+						     const char *basename)
 {
 	struct simd_aead_alg *salg;
-	struct crypto_aead *tfm;
-	struct aead_alg *ialg;
 	struct aead_alg *alg;
 	int err;
 
-	tfm = crypto_alloc_aead(basename, CRYPTO_ALG_INTERNAL,
-				CRYPTO_ALG_INTERNAL | CRYPTO_ALG_ASYNC);
-	if (IS_ERR(tfm))
-		return ERR_CAST(tfm);
-
-	ialg = crypto_aead_alg(tfm);
-
 	salg = kzalloc(sizeof(*salg), GFP_KERNEL);
 	if (!salg) {
 		salg = ERR_PTR(-ENOMEM);
-		goto out_put_tfm;
+		goto out;
 	}
 
 	salg->ialg_name = basename;
@@ -442,36 +412,20 @@ struct simd_aead_alg *simd_aead_create_compat(const char *algname,
 	if (err)
 		goto out_free_salg;
 
-out_put_tfm:
-	crypto_free_aead(tfm);
+out:
 	return salg;
 
 out_free_salg:
 	kfree(salg);
 	salg = ERR_PTR(err);
-	goto out_put_tfm;
-}
-EXPORT_SYMBOL_GPL(simd_aead_create_compat);
-
-struct simd_aead_alg *simd_aead_create(const char *algname,
-				       const char *basename)
-{
-	char drvname[CRYPTO_MAX_ALG_NAME];
-
-	if (snprintf(drvname, CRYPTO_MAX_ALG_NAME, "simd-%s", basename) >=
-	    CRYPTO_MAX_ALG_NAME)
-		return ERR_PTR(-ENAMETOOLONG);
-
-	return simd_aead_create_compat(algname, drvname, basename);
+	goto out;
 }
-EXPORT_SYMBOL_GPL(simd_aead_create);
 
-void simd_aead_free(struct simd_aead_alg *salg)
+static void simd_aead_free(struct simd_aead_alg *salg)
 {
 	crypto_unregister_aead(&salg->alg);
 	kfree(salg);
 }
-EXPORT_SYMBOL_GPL(simd_aead_free);
 
 int simd_register_aeads_compat(struct aead_alg *algs, int count,
 			       struct simd_aead_alg **simd_algs)
@@ -493,7 +447,7 @@ int simd_register_aeads_compat(struct aead_alg *algs, int count,
 		algname = algs[i].base.cra_name + 2;
 		drvname = algs[i].base.cra_driver_name + 2;
 		basename = algs[i].base.cra_driver_name;
-		simd = simd_aead_create_compat(algname, drvname, basename);
+		simd = simd_aead_create_compat(algs + i, algname, drvname, basename);
 		err = PTR_ERR(simd);
 		if (IS_ERR(simd))
 			goto err_unregister;
diff --git a/include/crypto/internal/simd.h b/include/crypto/internal/simd.h
index d2316242a9884..be97b97a75dd2 100644
--- a/include/crypto/internal/simd.h
+++ b/include/crypto/internal/simd.h
@@ -14,11 +14,10 @@
 struct simd_skcipher_alg;
 struct skcipher_alg;
 
-struct simd_skcipher_alg *simd_skcipher_create_compat(const char *algname,
+struct simd_skcipher_alg *simd_skcipher_create_compat(struct skcipher_alg *ialg,
+						      const char *algname,
 						      const char *drvname,
 						      const char *basename);
-struct simd_skcipher_alg *simd_skcipher_create(const char *algname,
-					       const char *basename);
 void simd_skcipher_free(struct simd_skcipher_alg *alg);
 
 int simd_register_skciphers_compat(struct skcipher_alg *algs, int count,
@@ -32,13 +31,6 @@ void simd_unregister_skciphers(struct skcipher_alg *algs, int count,
 struct simd_aead_alg;
 struct aead_alg;
 
-struct simd_aead_alg *simd_aead_create_compat(const char *algname,
-					      const char *drvname,
-					      const char *basename);
-struct simd_aead_alg *simd_aead_create(const char *algname,
-				       const char *basename);
-void simd_aead_free(struct simd_aead_alg *alg);
-
 int simd_register_aeads_compat(struct aead_alg *algs, int count,
 			       struct simd_aead_alg **simd_algs);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 047/197] netpoll: Ensure clean state on setup failures

[Sasha Levin]

From: Breno Leitao <leitao@debian.org>

[ Upstream commit ae5a0456e0b4cfd7e61619e55251ffdf1bc7adfb ]

Modify netpoll_setup() and __netpoll_setup() to ensure that the netpoll
structure (np) is left in a clean state if setup fails for any reason.
This prevents carrying over misconfigured fields in case of partial
setup success.

Key changes:
- np->dev is now set only after successful setup, ensuring it's always
  NULL if netpoll is not configured or if netpoll_setup() fails.
- np->local_ip is zeroed if netpoll setup doesn't complete successfully.
- Added DEBUG_NET_WARN_ON_ONCE() checks to catch unexpected states.
- Reordered some operations in __netpoll_setup() for better logical flow.

These changes improve the reliability of netpoll configuration, since it
assures that the structure is fully initialized or totally unset.

Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240822111051.179850-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/netpoll.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 55bcacf67df3b..e082139004093 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -626,12 +626,9 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev)
 	const struct net_device_ops *ops;
 	int err;
 
-	np->dev = ndev;
-	strscpy(np->dev_name, ndev->name, IFNAMSIZ);
-
 	if (ndev->priv_flags & IFF_DISABLE_NETPOLL) {
 		np_err(np, "%s doesn't support polling, aborting\n",
-		       np->dev_name);
+		       ndev->name);
 		err = -ENOTSUPP;
 		goto out;
 	}
@@ -649,7 +646,7 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev)
 
 		refcount_set(&npinfo->refcnt, 1);
 
-		ops = np->dev->netdev_ops;
+		ops = ndev->netdev_ops;
 		if (ops->ndo_netpoll_setup) {
 			err = ops->ndo_netpoll_setup(ndev, npinfo);
 			if (err)
@@ -660,6 +657,8 @@ int __netpoll_setup(struct netpoll *np, struct net_device *ndev)
 		refcount_inc(&npinfo->refcnt);
 	}
 
+	np->dev = ndev;
+	strscpy(np->dev_name, ndev->name, IFNAMSIZ);
 	npinfo->netpoll = np;
 
 	/* last thing to do is link it to the net device structure */
@@ -677,6 +676,7 @@ EXPORT_SYMBOL_GPL(__netpoll_setup);
 int netpoll_setup(struct netpoll *np)
 {
 	struct net_device *ndev = NULL;
+	bool ip_overwritten = false;
 	struct in_device *in_dev;
 	int err;
 
@@ -741,6 +741,7 @@ int netpoll_setup(struct netpoll *np)
 			}
 
 			np->local_ip.ip = ifa->ifa_local;
+			ip_overwritten = true;
 			np_info(np, "local IP %pI4\n", &np->local_ip.ip);
 		} else {
 #if IS_ENABLED(CONFIG_IPV6)
@@ -757,6 +758,7 @@ int netpoll_setup(struct netpoll *np)
 					    !!(ipv6_addr_type(&np->remote_ip.in6) & IPV6_ADDR_LINKLOCAL))
 						continue;
 					np->local_ip.in6 = ifp->addr;
+					ip_overwritten = true;
 					err = 0;
 					break;
 				}
@@ -787,6 +789,9 @@ int netpoll_setup(struct netpoll *np)
 	return 0;
 
 put:
+	DEBUG_NET_WARN_ON_ONCE(np->dev);
+	if (ip_overwritten)
+		memset(&np->local_ip, 0, sizeof(np->local_ip));
 	netdev_put(ndev, &np->dev_tracker);
 unlock:
 	rtnl_unlock();
-- 
2.43.0

[PATCH AUTOSEL 6.10 048/197] tcp: avoid reusing FIN_WAIT2 when trying to find port in connect() process

[Sasha Levin]

From: Jason Xing <kernelxing@tencent.com>

[ Upstream commit 0d9e5df4a257afc3a471a82961ace9a22b88295a ]

We found that one close-wait socket was reset by the other side
due to a new connection reusing the same port which is beyond our
expectation, so we have to investigate the underlying reason.

The following experiment is conducted in the test environment. We
limit the port range from 40000 to 40010 and delay the time to close()
after receiving a fin from the active close side, which can help us
easily reproduce like what happened in production.

Here are three connections captured by tcpdump:
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965525191
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 2769915070
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1
127.0.0.1.40002 > 127.0.0.1.9999: Flags [F.], seq 1, ack 1
// a few seconds later, within 60 seconds
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [.], ack 2
127.0.0.1.40002 > 127.0.0.1.9999: Flags [R], seq 2965525193
// later, very quickly
127.0.0.1.40002 > 127.0.0.1.9999: Flags [S], seq 2965590730
127.0.0.1.9999 > 127.0.0.1.40002: Flags [S.], seq 3120990805
127.0.0.1.40002 > 127.0.0.1.9999: Flags [.], ack 1

As we can see, the first flow is reset because:
1) client starts a new connection, I mean, the second one
2) client tries to find a suitable port which is a timewait socket
   (its state is timewait, substate is fin_wait2)
3) client occupies that timewait port to send a SYN
4) server finds a corresponding close-wait socket in ehash table,
   then replies with a challenge ack
5) client sends an RST to terminate this old close-wait socket.

I don't think the port selection algo can choose a FIN_WAIT2 socket
when we turn on tcp_tw_reuse because on the server side there
remain unread data. In some cases, if one side haven't call close() yet,
we should not consider it as expendable and treat it at will.

Even though, sometimes, the server isn't able to call close() as soon
as possible like what we expect, it can not be terminated easily,
especially due to a second unrelated connection happening.

After this patch, we can see the expected failure if we start a
connection when all the ports are occupied in fin_wait2 state:
"Ncat: Cannot assign requested address."

Reported-by: Jade Dong <jadedong@tencent.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240823001152.31004-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/tcp_ipv4.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index da0f502553991..7874b3718bc3c 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -118,6 +118,9 @@ int tcp_twsk_unique(struct sock *sk, struct sock *sktw, void *twp)
 	struct tcp_sock *tp = tcp_sk(sk);
 	int ts_recent_stamp;
 
+	if (tw->tw_substate == TCP_FIN_WAIT2)
+		reuse = 0;
+
 	if (reuse == 2) {
 		/* Still does not detect *everything* that goes through
 		 * lo, since we require a loopback src or dst address
-- 
2.43.0

[PATCH AUTOSEL 6.10 049/197] wifi: iwlwifi: mvm: use correct key iteration

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 4f1591d292277eec51d027405a92f0d4ef5e299e ]

In the cases changed here, key iteration isn't done from
an RCU critical section, but rather using the wiphy lock
as protection. Therefore, just use ieee80211_iter_keys().
The link switch case can therefore also use sync commands.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.69a2d18580c1.I2148e04d4b467d0b100beac8f7e449bfaaf775a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c b/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c
index 8a38fc4b0b0f9..455f5f4175064 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mld-key.c
@@ -144,7 +144,7 @@ static void iwl_mvm_mld_update_sta_key(struct ieee80211_hw *hw,
 	if (sta != data->sta || key->link_id >= 0)
 		return;
 
-	err = iwl_mvm_send_cmd_pdu(mvm, cmd_id, CMD_ASYNC, sizeof(cmd), &cmd);
+	err = iwl_mvm_send_cmd_pdu(mvm, cmd_id, 0, sizeof(cmd), &cmd);
 
 	if (err)
 		data->err = err;
@@ -162,8 +162,8 @@ int iwl_mvm_mld_update_sta_keys(struct iwl_mvm *mvm,
 		.new_sta_mask = new_sta_mask,
 	};
 
-	ieee80211_iter_keys_rcu(mvm->hw, vif, iwl_mvm_mld_update_sta_key,
-				&data);
+	ieee80211_iter_keys(mvm->hw, vif, iwl_mvm_mld_update_sta_key,
+			    &data);
 	return data.err;
 }
 
@@ -402,7 +402,7 @@ void iwl_mvm_sec_key_remove_ap(struct iwl_mvm *mvm,
 	if (!sec_key_ver)
 		return;
 
-	ieee80211_iter_keys_rcu(mvm->hw, vif,
-				iwl_mvm_sec_key_remove_ap_iter,
-				(void *)(uintptr_t)link_id);
+	ieee80211_iter_keys(mvm->hw, vif,
+			    iwl_mvm_sec_key_remove_ap_iter,
+			    (void *)(uintptr_t)link_id);
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 050/197] wifi: iwlwifi: allow only CN mcc from WRDD

[Sasha Levin]

From: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>

[ Upstream commit ff5aabe7c2a4a4b089a9ced0cb3d0e284963a7dd ]

Block other mcc expect CN from WRDD ACPI.

Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.fe6ea7aa4b39.I86004687a2963fe26f990770aca103e2f5cb1628@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/acpi.c       | 5 +++++
 drivers/net/wireless/intel/iwlwifi/fw/regulatory.h | 2 ++
 drivers/net/wireless/intel/iwlwifi/fw/uefi.c       | 2 +-
 drivers/net/wireless/intel/iwlwifi/fw/uefi.h       | 2 --
 4 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
index ba9e656037a20..9b3d3405fb83d 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/acpi.c
@@ -356,6 +356,11 @@ int iwl_acpi_get_mcc(struct iwl_fw_runtime *fwrt, char *mcc)
 	}
 
 	mcc_val = wifi_pkg->package.elements[1].integer.value;
+	if (mcc_val != BIOS_MCC_CHINA) {
+		ret = -EINVAL;
+		IWL_DEBUG_RADIO(fwrt, "ACPI WRDD is supported only for CN\n");
+		goto out_free;
+	}
 
 	mcc[0] = (mcc_val >> 8) & 0xff;
 	mcc[1] = mcc_val & 0xff;
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h b/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h
index 633c9ad9af841..ecf482647617c 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/regulatory.h
@@ -45,6 +45,8 @@
 #define IWL_WTAS_ENABLE_IEC_MSK	0x4
 #define IWL_WTAS_USA_UHB_MSK		BIT(16)
 
+#define BIOS_MCC_CHINA 0x434e
+
 /*
  * The profile for revision 2 is a superset of revision 1, which is in
  * turn a superset of revision 0.  So we can store all revisions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c
index fb982d4fe8510..2cf878f237ac6 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c
@@ -638,7 +638,7 @@ int iwl_uefi_get_mcc(struct iwl_fw_runtime *fwrt, char *mcc)
 		goto out;
 	}
 
-	if (data->mcc != UEFI_MCC_CHINA) {
+	if (data->mcc != BIOS_MCC_CHINA) {
 		ret = -EINVAL;
 		IWL_DEBUG_RADIO(fwrt, "UEFI WRDD is supported only for CN\n");
 		goto out;
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/uefi.h b/drivers/net/wireless/intel/iwlwifi/fw/uefi.h
index 1f8884ca8997c..e0ef981cd8f28 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/uefi.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/uefi.h
@@ -149,8 +149,6 @@ struct uefi_cnv_var_splc {
 	u32 default_pwr_limit;
 } __packed;
 
-#define UEFI_MCC_CHINA 0x434e
-
 /* struct uefi_cnv_var_wrdd - WRDD table as defined in UEFI
  * @revision: the revision of the table
  * @mcc: country identifier as defined in ISO/IEC 3166-1 Alpha 2 code
-- 
2.43.0

[PATCH AUTOSEL 6.10 051/197] wifi: iwlwifi: mvm: avoid NULL pointer dereference

[Sasha Levin]

From: Miri Korenblit <miriam.rachel.korenblit@intel.com>

[ Upstream commit 557a6cd847645e667f3b362560bd7e7c09aac284 ]

iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta
pointer is not NULL.
It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is
dereferencing the ieee80211_sta pointer.
If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL
pointer.
Fix this by checking the sta pointer before retrieving the mvmsta
from it. If sta is not NULL, then mvmsta isn't either.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce955eb00da10e08188f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 1d695ece93e9e..51c12d70e8c23 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -1195,6 +1195,9 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb,
 	bool is_ampdu = false;
 	int hdrlen;
 
+	if (WARN_ON_ONCE(!sta))
+		return -1;
+
 	mvmsta = iwl_mvm_sta_from_mac80211(sta);
 	fc = hdr->frame_control;
 	hdrlen = ieee80211_hdrlen(fc);
@@ -1202,9 +1205,6 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb,
 	if (IWL_MVM_NON_TRANSMITTING_AP && ieee80211_is_probe_resp(fc))
 		return -1;
 
-	if (WARN_ON_ONCE(!mvmsta))
-		return -1;
-
 	if (WARN_ON_ONCE(mvmsta->deflink.sta_id == IWL_MVM_INVALID_STA))
 		return -1;
 
@@ -1335,7 +1335,7 @@ static int iwl_mvm_tx_mpdu(struct iwl_mvm *mvm, struct sk_buff *skb,
 int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb,
 		       struct ieee80211_sta *sta)
 {
-	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	struct iwl_mvm_sta *mvmsta;
 	struct ieee80211_tx_info info;
 	struct sk_buff_head mpdus_skbs;
 	struct ieee80211_vif *vif;
@@ -1344,9 +1344,11 @@ int iwl_mvm_tx_skb_sta(struct iwl_mvm *mvm, struct sk_buff *skb,
 	struct sk_buff *orig_skb = skb;
 	const u8 *addr3;
 
-	if (WARN_ON_ONCE(!mvmsta))
+	if (WARN_ON_ONCE(!sta))
 		return -1;
 
+	mvmsta = iwl_mvm_sta_from_mac80211(sta);
+
 	if (WARN_ON_ONCE(mvmsta->deflink.sta_id == IWL_MVM_INVALID_STA))
 		return -1;
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 052/197] wifi: mac80211: fix RCU list iterations

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ac35180032fbc5d80b29af00ba4881815ceefcb6 ]

There are a number of places where RCU list iteration is
used, but that aren't (always) called with RCU held. Use
just list_for_each_entry() in most, and annotate iface
iteration with the required locks.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/chan.c | 4 +++-
 net/mac80211/mlme.c | 2 +-
 net/mac80211/scan.c | 2 +-
 net/mac80211/util.c | 4 +++-
 4 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c
index e6a7ff6ca6797..db5675d24e488 100644
--- a/net/mac80211/chan.c
+++ b/net/mac80211/chan.c
@@ -281,7 +281,9 @@ ieee80211_get_max_required_bw(struct ieee80211_link_data *link)
 	enum nl80211_chan_width max_bw = NL80211_CHAN_WIDTH_20_NOHT;
 	struct sta_info *sta;
 
-	list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
+	lockdep_assert_wiphy(sdata->local->hw.wiphy);
+
+	list_for_each_entry(sta, &sdata->local->sta_list, list) {
 		if (sdata != sta->sdata &&
 		    !(sta->sdata->bss && sta->sdata->bss == sdata->bss))
 			continue;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ad2ce9c92ba8a..eb6b5024ac264 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1020,7 +1020,7 @@ static bool ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
 		bool disable_mu_mimo = false;
 		struct ieee80211_sub_if_data *other;
 
-		list_for_each_entry_rcu(other, &local->interfaces, list) {
+		list_for_each_entry(other, &local->interfaces, list) {
 			if (other->vif.bss_conf.mu_mimo_owner) {
 				disable_mu_mimo = true;
 				break;
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index b5f2df61c7f67..2dd84fc542b2a 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -504,7 +504,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted)
 	 * the scan was in progress; if there was none this will
 	 * just be a no-op for the particular interface.
 	 */
-	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+	list_for_each_entry(sdata, &local->interfaces, list) {
 		if (ieee80211_sdata_running(sdata))
 			wiphy_work_queue(sdata->local->hw.wiphy, &sdata->work);
 	}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index c11dbe82ae1b3..d10e0c528c1bf 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -751,7 +751,9 @@ static void __iterate_interfaces(struct ieee80211_local *local,
 	struct ieee80211_sub_if_data *sdata;
 	bool active_only = iter_flags & IEEE80211_IFACE_ITER_ACTIVE;
 
-	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+	list_for_each_entry_rcu(sdata, &local->interfaces, list,
+				lockdep_is_held(&local->iflist_mtx) ||
+				lockdep_is_held(&local->hw.wiphy->mtx)) {
 		switch (sdata->vif.type) {
 		case NL80211_IFTYPE_MONITOR:
 			if (!(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE))
-- 
2.43.0

[PATCH AUTOSEL 6.10 053/197] ACPICA: iasl: handle empty connection_node

[Sasha Levin]

From: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>

[ Upstream commit a0a2459b79414584af6c46dd8c6f866d8f1aa421 ]

ACPICA commit 6c551e2c9487067d4b085333e7fe97e965a11625

Link: https://github.com/acpica/acpica/commit/6c551e2c
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpica/exprep.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 08196fa17080e..82b1fa2d201fe 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -437,6 +437,9 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info)
 
 		if (info->connection_node) {
 			second_desc = info->connection_node->object;
+			if (second_desc == NULL) {
+				break;
+			}
 			if (!(second_desc->common.flags & AOPOBJ_DATA_VALID)) {
 				status =
 				    acpi_ds_get_buffer_arguments(second_desc);
-- 
2.43.0

[PATCH AUTOSEL 6.10 054/197] proc: add config & param to block forcing mem writes

[Sasha Levin]

From: Adrian Ratiu <adrian.ratiu@collabora.com>

[ Upstream commit 41e8149c8892ed1962bd15350b3c3e6e90cba7f4 ]

This adds a Kconfig option and boot param to allow removing
the FOLL_FORCE flag from /proc/pid/mem write calls because
it can be abused.

The traditional forcing behavior is kept as default because
it can break GDB and some other use cases.

Previously we tried a more sophisticated approach allowing
distributions to fine-tune /proc/pid/mem behavior, however
that got NAK-ed by Linus [1], who prefers this simpler
approach with semantics also easier to understand for users.

Link: https://lore.kernel.org/lkml/CAHk-=wiGWLChxYmUA5HrT5aopZrB7_2VTa0NLZcxORgkUe5tEQ@mail.gmail.com/ [1]
Cc: Doug Anderson <dianders@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://lore.kernel.org/r/20240802080225.89408-1-adrian.ratiu@collabora.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         | 10 +++
 fs/proc/base.c                                | 61 ++++++++++++++++++-
 security/Kconfig                              | 32 ++++++++++
 3 files changed, 102 insertions(+), 1 deletion(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index c82446cef8e21..2c8e062eb2ce5 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -4791,6 +4791,16 @@
 	printk.time=	Show timing data prefixed to each printk message line
 			Format: <bool>  (1/Y/y=enable, 0/N/n=disable)
 
+	proc_mem.force_override= [KNL]
+			Format: {always | ptrace | never}
+			Traditionally /proc/pid/mem allows memory permissions to be
+			overridden without restrictions. This option may be set to
+			restrict that. Can be one of:
+			- 'always': traditional behavior always allows mem overrides.
+			- 'ptrace': only allow mem overrides for active ptracers.
+			- 'never':  never allow mem overrides.
+			If not specified, default is the CONFIG_PROC_MEM_* choice.
+
 	processor.max_cstate=	[HW,ACPI]
 			Limit processor to maximum C-state
 			max_cstate=9 overrides any DMI blacklist limit.
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 72a1acd03675c..f389c69767fa5 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -85,6 +85,7 @@
 #include <linux/elf.h>
 #include <linux/pid_namespace.h>
 #include <linux/user_namespace.h>
+#include <linux/fs_parser.h>
 #include <linux/fs_struct.h>
 #include <linux/slab.h>
 #include <linux/sched/autogroup.h>
@@ -117,6 +118,40 @@
 static u8 nlink_tid __ro_after_init;
 static u8 nlink_tgid __ro_after_init;
 
+enum proc_mem_force {
+	PROC_MEM_FORCE_ALWAYS,
+	PROC_MEM_FORCE_PTRACE,
+	PROC_MEM_FORCE_NEVER
+};
+
+static enum proc_mem_force proc_mem_force_override __ro_after_init =
+	IS_ENABLED(CONFIG_PROC_MEM_NO_FORCE) ? PROC_MEM_FORCE_NEVER :
+	IS_ENABLED(CONFIG_PROC_MEM_FORCE_PTRACE) ? PROC_MEM_FORCE_PTRACE :
+	PROC_MEM_FORCE_ALWAYS;
+
+static const struct constant_table proc_mem_force_table[] __initconst = {
+	{ "always", PROC_MEM_FORCE_ALWAYS },
+	{ "ptrace", PROC_MEM_FORCE_PTRACE },
+	{ "never", PROC_MEM_FORCE_NEVER },
+	{ }
+};
+
+static int __init early_proc_mem_force_override(char *buf)
+{
+	if (!buf)
+		return -EINVAL;
+
+	/*
+	 * lookup_constant() defaults to proc_mem_force_override to preseve
+	 * the initial Kconfig choice in case an invalid param gets passed.
+	 */
+	proc_mem_force_override = lookup_constant(proc_mem_force_table,
+						  buf, proc_mem_force_override);
+
+	return 0;
+}
+early_param("proc_mem.force_override", early_proc_mem_force_override);
+
 struct pid_entry {
 	const char *name;
 	unsigned int len;
@@ -835,6 +870,28 @@ static int mem_open(struct inode *inode, struct file *file)
 	return ret;
 }
 
+static bool proc_mem_foll_force(struct file *file, struct mm_struct *mm)
+{
+	struct task_struct *task;
+	bool ptrace_active = false;
+
+	switch (proc_mem_force_override) {
+	case PROC_MEM_FORCE_NEVER:
+		return false;
+	case PROC_MEM_FORCE_PTRACE:
+		task = get_proc_task(file_inode(file));
+		if (task) {
+			ptrace_active =	READ_ONCE(task->ptrace) &&
+					READ_ONCE(task->mm) == mm &&
+					READ_ONCE(task->parent) == current;
+			put_task_struct(task);
+		}
+		return ptrace_active;
+	default:
+		return true;
+	}
+}
+
 static ssize_t mem_rw(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos, int write)
 {
@@ -855,7 +912,9 @@ static ssize_t mem_rw(struct file *file, char __user *buf,
 	if (!mmget_not_zero(mm))
 		goto free;
 
-	flags = FOLL_FORCE | (write ? FOLL_WRITE : 0);
+	flags = write ? FOLL_WRITE : 0;
+	if (proc_mem_foll_force(file, mm))
+		flags |= FOLL_FORCE;
 
 	while (count > 0) {
 		size_t this_len = min_t(size_t, count, PAGE_SIZE);
diff --git a/security/Kconfig b/security/Kconfig
index 412e76f1575d0..a93c1a9b7c283 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -19,6 +19,38 @@ config SECURITY_DMESG_RESTRICT
 
 	  If you are unsure how to answer this question, answer N.
 
+choice
+	prompt "Allow /proc/pid/mem access override"
+	default PROC_MEM_ALWAYS_FORCE
+	help
+	  Traditionally /proc/pid/mem allows users to override memory
+	  permissions for users like ptrace, assuming they have ptrace
+	  capability.
+
+	  This allows people to limit that - either never override, or
+	  require actual active ptrace attachment.
+
+	  Defaults to the traditional behavior (for now)
+
+config PROC_MEM_ALWAYS_FORCE
+	bool "Traditional /proc/pid/mem behavior"
+	help
+	  This allows /proc/pid/mem accesses to override memory mapping
+	  permissions if you have ptrace access rights.
+
+config PROC_MEM_FORCE_PTRACE
+	bool "Require active ptrace() use for access override"
+	help
+	  This allows /proc/pid/mem accesses to override memory mapping
+	  permissions for active ptracers like gdb.
+
+config PROC_MEM_NO_FORCE
+	bool "Never"
+	help
+	  Never override memory mapping permissions
+
+endchoice
+
 config SECURITY
 	bool "Enable different security models"
 	depends on SYSFS
-- 
2.43.0

[PATCH AUTOSEL 6.10 055/197] drivers/perf: arm_spe: Use perf_allow_kernel() for permissions

[Sasha Levin]

From: James Clark <james.clark@linaro.org>

[ Upstream commit 5e9629d0ae977d6f6916d7e519724804e95f0b07 ]

Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().

This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():

  $ perf record -e arm_spe/pa_enable/

  Error:
  Access to performance monitoring and observability operations is
  limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
  setting ...

Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/perf/arm_spe_pmu.c | 9 ++++-----
 include/linux/perf_event.h | 8 +-------
 kernel/events/core.c       | 9 +++++++++
 3 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
index 9100d82bfabc0..3569050f9cf37 100644
--- a/drivers/perf/arm_spe_pmu.c
+++ b/drivers/perf/arm_spe_pmu.c
@@ -41,7 +41,7 @@
 
 /*
  * Cache if the event is allowed to trace Context information.
- * This allows us to perform the check, i.e, perfmon_capable(),
+ * This allows us to perform the check, i.e, perf_allow_kernel(),
  * in the context of the event owner, once, during the event_init().
  */
 #define SPE_PMU_HW_FLAGS_CX			0x00001
@@ -50,7 +50,7 @@ static_assert((PERF_EVENT_FLAG_ARCH & SPE_PMU_HW_FLAGS_CX) == SPE_PMU_HW_FLAGS_C
 
 static void set_spe_event_has_cx(struct perf_event *event)
 {
-	if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && perfmon_capable())
+	if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && !perf_allow_kernel(&event->attr))
 		event->hw.flags |= SPE_PMU_HW_FLAGS_CX;
 }
 
@@ -745,9 +745,8 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
 
 	set_spe_event_has_cx(event);
 	reg = arm_spe_event_to_pmscr(event);
-	if (!perfmon_capable() &&
-	    (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT)))
-		return -EACCES;
+	if (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT))
+		return perf_allow_kernel(&event->attr);
 
 	return 0;
 }
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 393fb13733b02..a7f1a3a4d1dce 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -1608,13 +1608,7 @@ static inline int perf_is_paranoid(void)
 	return sysctl_perf_event_paranoid > -1;
 }
 
-static inline int perf_allow_kernel(struct perf_event_attr *attr)
-{
-	if (sysctl_perf_event_paranoid > 1 && !perfmon_capable())
-		return -EACCES;
-
-	return security_perf_event_open(attr, PERF_SECURITY_KERNEL);
-}
+int perf_allow_kernel(struct perf_event_attr *attr);
 
 static inline int perf_allow_cpu(struct perf_event_attr *attr)
 {
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 36191add55c37..081d9692ce747 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -13362,6 +13362,15 @@ const struct perf_event_attr *perf_event_attrs(struct perf_event *event)
 	return &event->attr;
 }
 
+int perf_allow_kernel(struct perf_event_attr *attr)
+{
+	if (sysctl_perf_event_paranoid > 1 && !perfmon_capable())
+		return -EACCES;
+
+	return security_perf_event_open(attr, PERF_SECURITY_KERNEL);
+}
+EXPORT_SYMBOL_GPL(perf_allow_kernel);
+
 /*
  * Inherit an event from parent task to child task.
  *
-- 
2.43.0

[PATCH AUTOSEL 6.10 056/197] can: netlink: avoid call to do_set_data_bittiming callback with stale can_priv::ctrlmode

[Sasha Levin]

From: Stefan Mätje <stefan.maetje@esd.eu>

[ Upstream commit 2423cc20087ae9a7b7af575aa62304ef67cad7b6 ]

This patch moves the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_changelink in front of the evaluation of data[IFLA_CAN_BITTIMING].

This avoids a call to do_set_data_bittiming providing a stale
can_priv::ctrlmode with a CAN_CTRLMODE_FD flag not matching the
requested state when switching between a CAN Classic and CAN-FD bitrate.

In the same manner the evaluation of data[IFLA_CAN_CTRLMODE] in function
can_validate is also moved in front of the evaluation of
data[IFLA_CAN_BITTIMING].

This is a preparation for patches where the nominal and data bittiming
may have interdependencies on the driver side depending on the
CAN_CTRLMODE_FD flag state.

Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20240808164224.213522-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/dev/netlink.c | 102 +++++++++++++++++-----------------
 1 file changed, 51 insertions(+), 51 deletions(-)

diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index dfdc039d92a6c..01aacdcda2606 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -65,15 +65,6 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[],
 	if (!data)
 		return 0;
 
-	if (data[IFLA_CAN_BITTIMING]) {
-		struct can_bittiming bt;
-
-		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
-		err = can_validate_bittiming(&bt, extack);
-		if (err)
-			return err;
-	}
-
 	if (data[IFLA_CAN_CTRLMODE]) {
 		struct can_ctrlmode *cm = nla_data(data[IFLA_CAN_CTRLMODE]);
 		u32 tdc_flags = cm->flags & CAN_CTRLMODE_TDC_MASK;
@@ -114,6 +105,15 @@ static int can_validate(struct nlattr *tb[], struct nlattr *data[],
 		}
 	}
 
+	if (data[IFLA_CAN_BITTIMING]) {
+		struct can_bittiming bt;
+
+		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
+		err = can_validate_bittiming(&bt, extack);
+		if (err)
+			return err;
+	}
+
 	if (is_can_fd) {
 		if (!data[IFLA_CAN_BITTIMING] || !data[IFLA_CAN_DATA_BITTIMING])
 			return -EOPNOTSUPP;
@@ -195,48 +195,6 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 	/* We need synchronization with dev->stop() */
 	ASSERT_RTNL();
 
-	if (data[IFLA_CAN_BITTIMING]) {
-		struct can_bittiming bt;
-
-		/* Do not allow changing bittiming while running */
-		if (dev->flags & IFF_UP)
-			return -EBUSY;
-
-		/* Calculate bittiming parameters based on
-		 * bittiming_const if set, otherwise pass bitrate
-		 * directly via do_set_bitrate(). Bail out if neither
-		 * is given.
-		 */
-		if (!priv->bittiming_const && !priv->do_set_bittiming &&
-		    !priv->bitrate_const)
-			return -EOPNOTSUPP;
-
-		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
-		err = can_get_bittiming(dev, &bt,
-					priv->bittiming_const,
-					priv->bitrate_const,
-					priv->bitrate_const_cnt,
-					extack);
-		if (err)
-			return err;
-
-		if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) {
-			NL_SET_ERR_MSG_FMT(extack,
-					   "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps",
-					   bt.bitrate, priv->bitrate_max);
-			return -EINVAL;
-		}
-
-		memcpy(&priv->bittiming, &bt, sizeof(bt));
-
-		if (priv->do_set_bittiming) {
-			/* Finally, set the bit-timing registers */
-			err = priv->do_set_bittiming(dev);
-			if (err)
-				return err;
-		}
-	}
-
 	if (data[IFLA_CAN_CTRLMODE]) {
 		struct can_ctrlmode *cm;
 		u32 ctrlstatic;
@@ -284,6 +242,48 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 			priv->ctrlmode &= cm->flags | ~CAN_CTRLMODE_TDC_MASK;
 	}
 
+	if (data[IFLA_CAN_BITTIMING]) {
+		struct can_bittiming bt;
+
+		/* Do not allow changing bittiming while running */
+		if (dev->flags & IFF_UP)
+			return -EBUSY;
+
+		/* Calculate bittiming parameters based on
+		 * bittiming_const if set, otherwise pass bitrate
+		 * directly via do_set_bitrate(). Bail out if neither
+		 * is given.
+		 */
+		if (!priv->bittiming_const && !priv->do_set_bittiming &&
+		    !priv->bitrate_const)
+			return -EOPNOTSUPP;
+
+		memcpy(&bt, nla_data(data[IFLA_CAN_BITTIMING]), sizeof(bt));
+		err = can_get_bittiming(dev, &bt,
+					priv->bittiming_const,
+					priv->bitrate_const,
+					priv->bitrate_const_cnt,
+					extack);
+		if (err)
+			return err;
+
+		if (priv->bitrate_max && bt.bitrate > priv->bitrate_max) {
+			NL_SET_ERR_MSG_FMT(extack,
+					   "arbitration bitrate %u bps surpasses transceiver capabilities of %u bps",
+					   bt.bitrate, priv->bitrate_max);
+			return -EINVAL;
+		}
+
+		memcpy(&priv->bittiming, &bt, sizeof(bt));
+
+		if (priv->do_set_bittiming) {
+			/* Finally, set the bit-timing registers */
+			err = priv->do_set_bittiming(dev);
+			if (err)
+				return err;
+		}
+	}
+
 	if (data[IFLA_CAN_RESTART_MS]) {
 		/* Do not allow changing restart delay while running */
 		if (dev->flags & IFF_UP)
-- 
2.43.0

[PATCH AUTOSEL 6.10 057/197] netdev-genl: Set extack and fix error on napi-get

[Sasha Levin]

From: Joe Damato <jdamato@fastly.com>

[ Upstream commit 4e3a024b437ec0aee82550cc66a0f4e1a7a88a67 ]

In commit 27f91aaf49b3 ("netdev-genl: Add netlink framework functions
for napi"), when an invalid NAPI ID is specified the return value
-EINVAL is used and no extack is set.

Change the return value to -ENOENT and set the extack.

Before this commit:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                          --do napi-get --json='{"id": 451}'
Netlink error: Invalid argument
nl_len = 36 (20) nl_flags = 0x100 nl_type = 2
	error: -22

After this commit:

$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
                         --do napi-get --json='{"id": 451}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
	error: -2
	extack: {'bad-attr': '.id'}

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240831121707.17562-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/netdev-genl.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/net/core/netdev-genl.c b/net/core/netdev-genl.c
index 05f9515d2c05c..a17d7eaeb0019 100644
--- a/net/core/netdev-genl.c
+++ b/net/core/netdev-genl.c
@@ -216,10 +216,12 @@ int netdev_nl_napi_get_doit(struct sk_buff *skb, struct genl_info *info)
 	rtnl_lock();
 
 	napi = napi_by_id(napi_id);
-	if (napi)
+	if (napi) {
 		err = netdev_nl_napi_fill_one(rsp, napi, info);
-	else
-		err = -EINVAL;
+	} else {
+		NL_SET_BAD_ATTR(info->extack, info->attrs[NETDEV_A_NAPI_ID]);
+		err = -ENOENT;
+	}
 
 	rtnl_unlock();
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 058/197] block: fix integer overflow in BLKSECDISCARD

[Sasha Levin]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit 697ba0b6ec4ae04afb67d3911799b5e2043b4455 ]

I independently rediscovered

	commit 22d24a544b0d49bbcbd61c8c0eaf77d3c9297155
	block: fix overflow in blk_ioctl_discard()

but for secure erase.

Same problem:

	uint64_t r[2] = {512, 18446744073709551104ULL};
	ioctl(fd, BLKSECDISCARD, r);

will enter near infinite loop inside blkdev_issue_secure_erase():

	a.out: attempt to access beyond end of device
	loop0: rw=5, sector=3399043073, nr_sectors = 1024 limit=2048
	bio_check_eod: 3286214 callbacks suppressed

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://lore.kernel.org/r/9e64057f-650a-46d1-b9f7-34af391536ef@p183
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/ioctl.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/block/ioctl.c b/block/ioctl.c
index d570e16958961..4515d4679eefd 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -126,7 +126,7 @@ static int blk_ioctl_discard(struct block_device *bdev, blk_mode_t mode,
 		return -EINVAL;
 
 	filemap_invalidate_lock(bdev->bd_mapping);
-	err = truncate_bdev_range(bdev, mode, start, start + len - 1);
+	err = truncate_bdev_range(bdev, mode, start, end - 1);
 	if (err)
 		goto fail;
 
@@ -163,7 +163,7 @@ static int blk_ioctl_discard(struct block_device *bdev, blk_mode_t mode,
 static int blk_ioctl_secure_erase(struct block_device *bdev, blk_mode_t mode,
 		void __user *argp)
 {
-	uint64_t start, len;
+	uint64_t start, len, end;
 	uint64_t range[2];
 	int err;
 
@@ -178,11 +178,12 @@ static int blk_ioctl_secure_erase(struct block_device *bdev, blk_mode_t mode,
 	len = range[1];
 	if ((start & 511) || (len & 511))
 		return -EINVAL;
-	if (start + len > bdev_nr_bytes(bdev))
+	if (check_add_overflow(start, len, &end) ||
+	    end > bdev_nr_bytes(bdev))
 		return -EINVAL;
 
 	filemap_invalidate_lock(bdev->bd_mapping);
-	err = truncate_bdev_range(bdev, mode, start, start + len - 1);
+	err = truncate_bdev_range(bdev, mode, start, end - 1);
 	if (!err)
 		err = blkdev_issue_secure_erase(bdev, start >> 9, len >> 9,
 						GFP_KERNEL);
-- 
2.43.0

[PATCH AUTOSEL 6.10 059/197] arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()

[Sasha Levin]

From: Fares Mehanna <faresx@amazon.de>

[ Upstream commit 7eced90b202d63cdc1b9b11b1353adb1389830f9 ]

The reasons for PTEs in the kernel direct map to be marked invalid are not
limited to kfence / debug pagealloc machinery. In particular,
memfd_secret() also steals pages with set_direct_map_invalid_noflush().

When building the transitional page tables for kexec from the current
kernel's page tables, those pages need to become regular writable pages,
otherwise, if the relocation places kexec segments over such pages, a fault
will occur during kexec, leading to host going dark during kexec.

This patch addresses the kexec issue by marking any PTE as valid if it is
not none. While this fixes the kexec crash, it does not address the
security concern that if processes owning secret memory are not terminated
before kexec, the secret content will be mapped in the new kernel without
being scrubbed.

Suggested-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Fares Mehanna <faresx@amazon.de>
Link: https://lore.kernel.org/r/20240902163309.97113-1-faresx@amazon.de
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/mm/trans_pgd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/mm/trans_pgd.c b/arch/arm64/mm/trans_pgd.c
index 5139a28130c08..0f7b484cb2ff2 100644
--- a/arch/arm64/mm/trans_pgd.c
+++ b/arch/arm64/mm/trans_pgd.c
@@ -42,14 +42,16 @@ static void _copy_pte(pte_t *dst_ptep, pte_t *src_ptep, unsigned long addr)
 		 * the temporary mappings we use during restore.
 		 */
 		__set_pte(dst_ptep, pte_mkwrite_novma(pte));
-	} else if ((debug_pagealloc_enabled() ||
-		   is_kfence_address((void *)addr)) && !pte_none(pte)) {
+	} else if (!pte_none(pte)) {
 		/*
 		 * debug_pagealloc will removed the PTE_VALID bit if
 		 * the page isn't in use by the resume kernel. It may have
 		 * been in use by the original kernel, in which case we need
 		 * to put it back in our copy to do the restore.
 		 *
+		 * Other cases include kfence / vmalloc / memfd_secret which
+		 * may call `set_direct_map_invalid_noflush()`.
+		 *
 		 * Before marking this entry valid, check the pfn should
 		 * be mapped.
 		 */
-- 
2.43.0

[PATCH AUTOSEL 6.10 060/197] net: phy: Check for read errors in SIOCGMIIREG

[Sasha Levin]

From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

[ Upstream commit 569bf6d481b0b823c3c9c3b8be77908fd7caf66b ]

When reading registers from the PHY using the SIOCGMIIREG IOCTL any
errors returned from either mdiobus_read() or mdiobus_c45_read() are
ignored, and parts of the returned error is passed as the register value
back to user-space.

For example, if mdiobus_c45_read() is used with a bus that do not
implement the read_c45() callback -EOPNOTSUPP is returned. This is
however directly stored in mii_data->val_out and returned as the
registers content. As val_out is a u16 the error code is truncated and
returned as a plausible register value.

Fix this by first checking the return value for errors before returning
it as the register content.

Before this patch,

    # phytool read eth0/0:1/0
    0xffa1

After this change,

    $ phytool read eth0/0:1/0
    error: phy_read (-95)

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20240903171536.628930-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/phy.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index c4236564c1cd0..8495b111a524a 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -342,14 +342,19 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
 		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
 			prtad = mdio_phy_id_prtad(mii_data->phy_id);
 			devad = mdio_phy_id_devad(mii_data->phy_id);
-			mii_data->val_out = mdiobus_c45_read(
-				phydev->mdio.bus, prtad, devad,
-				mii_data->reg_num);
+			ret = mdiobus_c45_read(phydev->mdio.bus, prtad, devad,
+					       mii_data->reg_num);
+
 		} else {
-			mii_data->val_out = mdiobus_read(
-				phydev->mdio.bus, mii_data->phy_id,
-				mii_data->reg_num);
+			ret = mdiobus_read(phydev->mdio.bus, mii_data->phy_id,
+					   mii_data->reg_num);
 		}
+
+		if (ret < 0)
+			return ret;
+
+		mii_data->val_out = ret;
+
 		return 0;
 
 	case SIOCSMIIREG:
-- 
2.43.0

[PATCH AUTOSEL 6.10 061/197] wifi: rtw89: avoid reading out of bounds when loading TX power FW elements

[Sasha Levin]

From: Zong-Zhe Yang <kevin_yang@realtek.com>

[ Upstream commit ed2e4bb17a4884cf29c3347353d8aabb7265b46c ]

Because the loop-expression will do one more time before getting false from
cond-expression, the original code copied one more entry size beyond valid
region.

Fix it by moving the entry copy to loop-body.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240902015803.20420-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw89/core.h | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 112bdd95fc6ea..504660ee3cba3 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -3888,16 +3888,22 @@ struct rtw89_txpwr_conf {
 	const void *data;
 };
 
+static inline bool rtw89_txpwr_entcpy(void *entry, const void *cursor, u8 size,
+				      const struct rtw89_txpwr_conf *conf)
+{
+	u8 valid_size = min(size, conf->ent_sz);
+
+	memcpy(entry, cursor, valid_size);
+	return true;
+}
+
 #define rtw89_txpwr_conf_valid(conf) (!!(conf)->data)
 
 #define rtw89_for_each_in_txpwr_conf(entry, cursor, conf) \
-	for (typecheck(const void *, cursor), (cursor) = (conf)->data, \
-	     memcpy(&(entry), cursor, \
-		    min_t(u8, sizeof(entry), (conf)->ent_sz)); \
+	for (typecheck(const void *, cursor), (cursor) = (conf)->data; \
 	     (cursor) < (conf)->data + (conf)->num_ents * (conf)->ent_sz; \
-	     (cursor) += (conf)->ent_sz, \
-	     memcpy(&(entry), cursor, \
-		    min_t(u8, sizeof(entry), (conf)->ent_sz)))
+	     (cursor) += (conf)->ent_sz) \
+		if (rtw89_txpwr_entcpy(&(entry), cursor, sizeof(entry), conf))
 
 struct rtw89_txpwr_byrate_data {
 	struct rtw89_txpwr_conf conf;
-- 
2.43.0

[PATCH AUTOSEL 6.10 062/197] x86/bugs: Add missing NO_SSB flag

[Sasha Levin]

From: Daniel Sneddon <daniel.sneddon@linux.intel.com>

[ Upstream commit 23e12b54acf621f4f03381dca91cc5f1334f21fd ]

The Moorefield and Lightning Mountain Atom processors are
missing the NO_SSB flag in the vulnerabilities whitelist.
This will cause unaffected parts to incorrectly be reported
as vulnerable. Add the missing flag.

These parts are currently out of service and were verified
internally with archived documentation that they need the
NO_SSB flag.

Closes: https://lore.kernel.org/lkml/CAEJ9NQdhh+4GxrtG1DuYgqYhvc0hi-sKZh-2niukJ-MyFLntAA@mail.gmail.com/
Reported-by: Shanavas.K.S <shanavasks@gmail.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240829192437.4074196-1-daniel.sneddon@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d4e539d4e158c..be307c9ef263d 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1165,8 +1165,8 @@ static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = {
 
 	VULNWL_INTEL(INTEL_CORE_YONAH,		NO_SSB),
 
-	VULNWL_INTEL(INTEL_ATOM_AIRMONT_MID,	NO_L1TF | MSBDS_ONLY | NO_SWAPGS | NO_ITLB_MULTIHIT),
-	VULNWL_INTEL(INTEL_ATOM_AIRMONT_NP,	NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT),
+	VULNWL_INTEL(INTEL_ATOM_AIRMONT_MID,	NO_SSB | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT | MSBDS_ONLY),
+	VULNWL_INTEL(INTEL_ATOM_AIRMONT_NP,	NO_SSB | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT),
 
 	VULNWL_INTEL(INTEL_ATOM_GOLDMONT,	NO_MDS | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT | NO_MMIO),
 	VULNWL_INTEL(INTEL_ATOM_GOLDMONT_D,	NO_MDS | NO_L1TF | NO_SWAPGS | NO_ITLB_MULTIHIT | NO_MMIO),
-- 
2.43.0

[PATCH AUTOSEL 6.10 063/197] x86/bugs: Fix handling when SRSO mitigation is disabled

[Sasha Levin]

From: David Kaplan <david.kaplan@amd.com>

[ Upstream commit 1dbb6b1495d472806fef1f4c94f5b3e4c89a3c1d ]

When the SRSO mitigation is disabled, either via mitigations=off or
spec_rstack_overflow=off, the warning about the lack of IBPB-enhancing
microcode is printed anyway.

This is unnecessary since the user has turned off the mitigation.

  [ bp: Massage, drop SBPB rationale as it doesn't matter because when
    mitigations are disabled x86_pred_cmd is not being used anyway. ]

Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240904150711.193022-1-david.kaplan@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/bugs.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index b6f927f6c567e..47c84503ad9be 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -2545,10 +2545,9 @@ static void __init srso_select_mitigation(void)
 {
 	bool has_microcode = boot_cpu_has(X86_FEATURE_IBPB_BRTYPE);
 
-	if (cpu_mitigations_off())
-		return;
-
-	if (!boot_cpu_has_bug(X86_BUG_SRSO)) {
+	if (!boot_cpu_has_bug(X86_BUG_SRSO) ||
+	    cpu_mitigations_off() ||
+	    srso_cmd == SRSO_CMD_OFF) {
 		if (boot_cpu_has(X86_FEATURE_SBPB))
 			x86_pred_cmd = PRED_CMD_SBPB;
 		return;
@@ -2579,11 +2578,6 @@ static void __init srso_select_mitigation(void)
 	}
 
 	switch (srso_cmd) {
-	case SRSO_CMD_OFF:
-		if (boot_cpu_has(X86_FEATURE_SBPB))
-			x86_pred_cmd = PRED_CMD_SBPB;
-		return;
-
 	case SRSO_CMD_MICROCODE:
 		if (has_microcode) {
 			srso_mitigation = SRSO_MITIGATION_MICROCODE;
@@ -2637,6 +2631,8 @@ static void __init srso_select_mitigation(void)
 			pr_err("WARNING: kernel not compiled with MITIGATION_SRSO.\n");
                 }
 		break;
+	default:
+		break;
 	}
 
 out:
-- 
2.43.0

[PATCH AUTOSEL 6.10 064/197] net: napi: Prevent overflow of napi_defer_hard_irqs

[Sasha Levin]

From: Joe Damato <jdamato@fastly.com>

[ Upstream commit 08062af0a52107a243f7608fd972edb54ca5b7f8 ]

In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.

This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.

The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.

Before this patch:

$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647

After this patch:

$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range

Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:

include/linux/netdevice.h:      unsigned int            tx_queue_len;

And has an overflow check:

dev_change_tx_queue_len(..., unsigned long new_len):

  if (new_len != (unsigned int)new_len)
          return -ERANGE;

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/networking/net_cachelines/net_device.rst | 2 +-
 include/linux/netdevice.h                              | 4 ++--
 net/core/net-sysfs.c                                   | 6 +++++-
 3 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/networking/net_cachelines/net_device.rst b/Documentation/networking/net_cachelines/net_device.rst
index 70c4fb9d4e5ce..d68f37f5b1f82 100644
--- a/Documentation/networking/net_cachelines/net_device.rst
+++ b/Documentation/networking/net_cachelines/net_device.rst
@@ -98,7 +98,7 @@ unsigned_int                        num_rx_queues
 unsigned_int                        real_num_rx_queues      -                   read_mostly         get_rps_cpu
 struct_bpf_prog*                    xdp_prog                -                   read_mostly         netif_elide_gro()
 unsigned_long                       gro_flush_timeout       -                   read_mostly         napi_complete_done
-int                                 napi_defer_hard_irqs    -                   read_mostly         napi_complete_done
+u32                                 napi_defer_hard_irqs    -                   read_mostly         napi_complete_done
 unsigned_int                        gro_max_size            -                   read_mostly         skb_gro_receive
 unsigned_int                        gro_ipv4_max_size       -                   read_mostly         skb_gro_receive
 rx_handler_func_t*                  rx_handler              read_mostly         -                   __netif_receive_skb_core
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index d20c6c99eb887..23b6b07419806 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -354,7 +354,7 @@ struct napi_struct {
 
 	unsigned long		state;
 	int			weight;
-	int			defer_hard_irqs_count;
+	u32			defer_hard_irqs_count;
 	unsigned long		gro_bitmask;
 	int			(*poll)(struct napi_struct *, int);
 #ifdef CONFIG_NETPOLL
@@ -2089,7 +2089,7 @@ struct net_device {
 	unsigned int		real_num_rx_queues;
 	struct netdev_rx_queue	*_rx;
 	unsigned long		gro_flush_timeout;
-	int			napi_defer_hard_irqs;
+	u32			napi_defer_hard_irqs;
 	unsigned int		gro_max_size;
 	unsigned int		gro_ipv4_max_size;
 	rx_handler_func_t __rcu	*rx_handler;
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 15ad775ddd3c1..dc0c622d453e1 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -32,6 +32,7 @@
 #ifdef CONFIG_SYSFS
 static const char fmt_hex[] = "%#x\n";
 static const char fmt_dec[] = "%d\n";
+static const char fmt_uint[] = "%u\n";
 static const char fmt_ulong[] = "%lu\n";
 static const char fmt_u64[] = "%llu\n";
 
@@ -425,6 +426,9 @@ NETDEVICE_SHOW_RW(gro_flush_timeout, fmt_ulong);
 
 static int change_napi_defer_hard_irqs(struct net_device *dev, unsigned long val)
 {
+	if (val > S32_MAX)
+		return -ERANGE;
+
 	WRITE_ONCE(dev->napi_defer_hard_irqs, val);
 	return 0;
 }
@@ -438,7 +442,7 @@ static ssize_t napi_defer_hard_irqs_store(struct device *dev,
 
 	return netdev_store(dev, attr, buf, len, change_napi_defer_hard_irqs);
 }
-NETDEVICE_SHOW_RW(napi_defer_hard_irqs, fmt_dec);
+NETDEVICE_SHOW_RW(napi_defer_hard_irqs, fmt_uint);
 
 static ssize_t ifalias_store(struct device *dev, struct device_attribute *attr,
 			     const char *buf, size_t len)
-- 
2.43.0

[PATCH AUTOSEL 6.10 065/197] crypto: hisilicon - fix missed error branch

[Sasha Levin]

From: Yang Shen <shenyang39@huawei.com>

[ Upstream commit f386dc64e1a5d3dcb84579119ec350ab026fea88 ]

If an error occurs in the process after the SGL is mapped
successfully, it need to unmap the SGL.

Otherwise, memory problems may occur.

Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/sgl.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/hisilicon/sgl.c b/drivers/crypto/hisilicon/sgl.c
index 568acd0aee3fa..c974f95cd126f 100644
--- a/drivers/crypto/hisilicon/sgl.c
+++ b/drivers/crypto/hisilicon/sgl.c
@@ -225,7 +225,7 @@ hisi_acc_sg_buf_map_to_hw_sgl(struct device *dev,
 	dma_addr_t curr_sgl_dma = 0;
 	struct acc_hw_sge *curr_hw_sge;
 	struct scatterlist *sg;
-	int sg_n;
+	int sg_n, ret;
 
 	if (!dev || !sgl || !pool || !hw_sgl_dma || index >= pool->count)
 		return ERR_PTR(-EINVAL);
@@ -240,14 +240,15 @@ hisi_acc_sg_buf_map_to_hw_sgl(struct device *dev,
 
 	if (sg_n_mapped > pool->sge_nr) {
 		dev_err(dev, "the number of entries in input scatterlist is bigger than SGL pool setting.\n");
-		return ERR_PTR(-EINVAL);
+		ret = -EINVAL;
+		goto err_unmap;
 	}
 
 	curr_hw_sgl = acc_get_sgl(pool, index, &curr_sgl_dma);
 	if (IS_ERR(curr_hw_sgl)) {
 		dev_err(dev, "Get SGL error!\n");
-		dma_unmap_sg(dev, sgl, sg_n, DMA_BIDIRECTIONAL);
-		return ERR_PTR(-ENOMEM);
+		ret = -ENOMEM;
+		goto err_unmap;
 	}
 	curr_hw_sgl->entry_length_in_sgl = cpu_to_le16(pool->sge_nr);
 	curr_hw_sge = curr_hw_sgl->sge_entries;
@@ -262,6 +263,11 @@ hisi_acc_sg_buf_map_to_hw_sgl(struct device *dev,
 	*hw_sgl_dma = curr_sgl_dma;
 
 	return curr_hw_sgl;
+
+err_unmap:
+	dma_unmap_sg(dev, sgl, sg_n, DMA_BIDIRECTIONAL);
+
+	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(hisi_acc_sg_buf_map_to_hw_sgl);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 066/197] crypto: hisilicon/qm - reset device before enabling it

[Sasha Levin]

From: Weili Qian <qianweili@huawei.com>

[ Upstream commit 5d2d1ee0874c26b8010ddf7f57e2f246e848af38 ]

Before the device is enabled again, the device may still
store the previously processed data. If an error occurs in
the previous task, the device may fail to be enabled again.
Therefore, before enabling device, reset the device to restore
the initial state.

Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/hisilicon/hpre/hpre_main.c |  32 +++---
 drivers/crypto/hisilicon/qm.c             | 114 +++++++++++++++-------
 drivers/crypto/hisilicon/sec2/sec_main.c  |  16 ++-
 drivers/crypto/hisilicon/zip/zip_main.c   |  23 +++--
 4 files changed, 121 insertions(+), 64 deletions(-)

diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index 10aa4da93323f..12d52713b95e3 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -358,6 +358,8 @@ static struct dfx_diff_registers hpre_diff_regs[] = {
 	},
 };
 
+static const struct hisi_qm_err_ini hpre_err_ini;
+
 bool hpre_check_alg_support(struct hisi_qm *qm, u32 alg)
 {
 	u32 cap_val;
@@ -1161,6 +1163,7 @@ static int hpre_qm_init(struct hisi_qm *qm, struct pci_dev *pdev)
 		qm->qp_num = pf_q_num;
 		qm->debug.curr_qm_qp_num = pf_q_num;
 		qm->qm_list = &hpre_devices;
+		qm->err_ini = &hpre_err_ini;
 		if (pf_q_num_flag)
 			set_bit(QM_MODULE_PARAM, &qm->misc_ctl);
 	}
@@ -1350,8 +1353,6 @@ static int hpre_pf_probe_init(struct hpre *hpre)
 
 	hpre_open_sva_prefetch(qm);
 
-	qm->err_ini = &hpre_err_ini;
-	qm->err_ini->err_info_init(qm);
 	hisi_qm_dev_err_init(qm);
 	ret = hpre_show_last_regs_init(qm);
 	if (ret)
@@ -1380,6 +1381,18 @@ static int hpre_probe_init(struct hpre *hpre)
 	return 0;
 }
 
+static void hpre_probe_uninit(struct hisi_qm *qm)
+{
+	if (qm->fun_type == QM_HW_VF)
+		return;
+
+	hpre_cnt_regs_clear(qm);
+	qm->debug.curr_qm_qp_num = 0;
+	hpre_show_last_regs_uninit(qm);
+	hpre_close_sva_prefetch(qm);
+	hisi_qm_dev_err_uninit(qm);
+}
+
 static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct hisi_qm *qm;
@@ -1405,7 +1418,7 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ret = hisi_qm_start(qm);
 	if (ret)
-		goto err_with_err_init;
+		goto err_with_probe_init;
 
 	ret = hpre_debugfs_init(qm);
 	if (ret)
@@ -1444,9 +1457,8 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	hpre_debugfs_exit(qm);
 	hisi_qm_stop(qm, QM_NORMAL);
 
-err_with_err_init:
-	hpre_show_last_regs_uninit(qm);
-	hisi_qm_dev_err_uninit(qm);
+err_with_probe_init:
+	hpre_probe_uninit(qm);
 
 err_with_qm_init:
 	hisi_qm_uninit(qm);
@@ -1468,13 +1480,7 @@ static void hpre_remove(struct pci_dev *pdev)
 	hpre_debugfs_exit(qm);
 	hisi_qm_stop(qm, QM_NORMAL);
 
-	if (qm->fun_type == QM_HW_PF) {
-		hpre_cnt_regs_clear(qm);
-		qm->debug.curr_qm_qp_num = 0;
-		hpre_show_last_regs_uninit(qm);
-		hisi_qm_dev_err_uninit(qm);
-	}
-
+	hpre_probe_uninit(qm);
 	hisi_qm_uninit(qm);
 }
 
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 3dac8d8e85686..d51f0dc64affc 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -450,6 +450,7 @@ static struct qm_typical_qos_table shaper_cbs_s[] = {
 };
 
 static void qm_irqs_unregister(struct hisi_qm *qm);
+static int qm_reset_device(struct hisi_qm *qm);
 
 static u32 qm_get_hw_error_status(struct hisi_qm *qm)
 {
@@ -4113,6 +4114,22 @@ static int qm_controller_reset_prepare(struct hisi_qm *qm)
 	return 0;
 }
 
+static int qm_master_ooo_check(struct hisi_qm *qm)
+{
+	u32 val;
+	int ret;
+
+	/* Check the ooo register of the device before resetting the device. */
+	writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN, qm->io_base + ACC_MASTER_GLOBAL_CTRL);
+	ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN,
+					 val, (val == ACC_MASTER_TRANS_RETURN_RW),
+					 POLL_PERIOD, POLL_TIMEOUT);
+	if (ret)
+		pci_warn(qm->pdev, "Bus lock! Please reset system.\n");
+
+	return ret;
+}
+
 static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm)
 {
 	u32 nfe_enb = 0;
@@ -4135,11 +4152,10 @@ static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm)
 	}
 }
 
-static int qm_soft_reset(struct hisi_qm *qm)
+static int qm_soft_reset_prepare(struct hisi_qm *qm)
 {
 	struct pci_dev *pdev = qm->pdev;
 	int ret;
-	u32 val;
 
 	/* Ensure all doorbells and mailboxes received by QM */
 	ret = qm_check_req_recv(qm);
@@ -4161,29 +4177,23 @@ static int qm_soft_reset(struct hisi_qm *qm)
 	}
 
 	qm_dev_ecc_mbit_handle(qm);
-
-	/* OOO register set and check */
-	writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN,
-	       qm->io_base + ACC_MASTER_GLOBAL_CTRL);
-
-	/* If bus lock, reset chip */
-	ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN,
-					 val,
-					 (val == ACC_MASTER_TRANS_RETURN_RW),
-					 POLL_PERIOD, POLL_TIMEOUT);
-	if (ret) {
-		pci_emerg(pdev, "Bus lock! Please reset system.\n");
+	ret = qm_master_ooo_check(qm);
+	if (ret)
 		return ret;
-	}
 
 	if (qm->err_ini->close_sva_prefetch)
 		qm->err_ini->close_sva_prefetch(qm);
 
 	ret = qm_set_pf_mse(qm, false);
-	if (ret) {
+	if (ret)
 		pci_err(pdev, "Fails to disable pf MSE bit.\n");
-		return ret;
-	}
+
+	return ret;
+}
+
+static int qm_reset_device(struct hisi_qm *qm)
+{
+	struct pci_dev *pdev = qm->pdev;
 
 	/* The reset related sub-control registers are not in PCI BAR */
 	if (ACPI_HANDLE(&pdev->dev)) {
@@ -4202,12 +4212,23 @@ static int qm_soft_reset(struct hisi_qm *qm)
 			pci_err(pdev, "Reset step %llu failed!\n", value);
 			return -EIO;
 		}
-	} else {
-		pci_err(pdev, "No reset method!\n");
-		return -EINVAL;
+
+		return 0;
 	}
 
-	return 0;
+	pci_err(pdev, "No reset method!\n");
+	return -EINVAL;
+}
+
+static int qm_soft_reset(struct hisi_qm *qm)
+{
+	int ret;
+
+	ret = qm_soft_reset_prepare(qm);
+	if (ret)
+		return ret;
+
+	return qm_reset_device(qm);
 }
 
 static int qm_vf_reset_done(struct hisi_qm *qm)
@@ -5160,6 +5181,35 @@ static int qm_get_pci_res(struct hisi_qm *qm)
 	return ret;
 }
 
+static int qm_clear_device(struct hisi_qm *qm)
+{
+	acpi_handle handle = ACPI_HANDLE(&qm->pdev->dev);
+	int ret;
+
+	if (qm->fun_type == QM_HW_VF)
+		return 0;
+
+	/* Device does not support reset, return */
+	if (!qm->err_ini->err_info_init)
+		return 0;
+	qm->err_ini->err_info_init(qm);
+
+	if (!handle)
+		return 0;
+
+	/* No reset method, return */
+	if (!acpi_has_method(handle, qm->err_info.acpi_rst))
+		return 0;
+
+	ret = qm_master_ooo_check(qm);
+	if (ret) {
+		writel(0x0, qm->io_base + ACC_MASTER_GLOBAL_CTRL);
+		return ret;
+	}
+
+	return qm_reset_device(qm);
+}
+
 static int hisi_qm_pci_init(struct hisi_qm *qm)
 {
 	struct pci_dev *pdev = qm->pdev;
@@ -5189,8 +5239,14 @@ static int hisi_qm_pci_init(struct hisi_qm *qm)
 		goto err_get_pci_res;
 	}
 
+	ret = qm_clear_device(qm);
+	if (ret)
+		goto err_free_vectors;
+
 	return 0;
 
+err_free_vectors:
+	pci_free_irq_vectors(pdev);
 err_get_pci_res:
 	qm_put_pci_res(qm);
 err_disable_pcidev:
@@ -5491,7 +5547,6 @@ static int qm_prepare_for_suspend(struct hisi_qm *qm)
 {
 	struct pci_dev *pdev = qm->pdev;
 	int ret;
-	u32 val;
 
 	ret = qm->ops->set_msi(qm, false);
 	if (ret) {
@@ -5499,18 +5554,9 @@ static int qm_prepare_for_suspend(struct hisi_qm *qm)
 		return ret;
 	}
 
-	/* shutdown OOO register */
-	writel(ACC_MASTER_GLOBAL_CTRL_SHUTDOWN,
-	       qm->io_base + ACC_MASTER_GLOBAL_CTRL);
-
-	ret = readl_relaxed_poll_timeout(qm->io_base + ACC_MASTER_TRANS_RETURN,
-					 val,
-					 (val == ACC_MASTER_TRANS_RETURN_RW),
-					 POLL_PERIOD, POLL_TIMEOUT);
-	if (ret) {
-		pci_emerg(pdev, "Bus lock! Please reset system.\n");
+	ret = qm_master_ooo_check(qm);
+	if (ret)
 		return ret;
-	}
 
 	ret = qm_set_pf_mse(qm, false);
 	if (ret)
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 75aad04ffe5eb..c35533d8930b2 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -1065,9 +1065,6 @@ static int sec_pf_probe_init(struct sec_dev *sec)
 	struct hisi_qm *qm = &sec->qm;
 	int ret;
 
-	qm->err_ini = &sec_err_ini;
-	qm->err_ini->err_info_init(qm);
-
 	ret = sec_set_user_domain_and_cache(qm);
 	if (ret)
 		return ret;
@@ -1122,6 +1119,7 @@ static int sec_qm_init(struct hisi_qm *qm, struct pci_dev *pdev)
 		qm->qp_num = pf_q_num;
 		qm->debug.curr_qm_qp_num = pf_q_num;
 		qm->qm_list = &sec_devices;
+		qm->err_ini = &sec_err_ini;
 		if (pf_q_num_flag)
 			set_bit(QM_MODULE_PARAM, &qm->misc_ctl);
 	} else if (qm->fun_type == QM_HW_VF && qm->ver == QM_HW_V1) {
@@ -1186,6 +1184,12 @@ static int sec_probe_init(struct sec_dev *sec)
 
 static void sec_probe_uninit(struct hisi_qm *qm)
 {
+	if (qm->fun_type == QM_HW_VF)
+		return;
+
+	sec_debug_regs_clear(qm);
+	sec_show_last_regs_uninit(qm);
+	sec_close_sva_prefetch(qm);
 	hisi_qm_dev_err_uninit(qm);
 }
 
@@ -1274,7 +1278,6 @@ static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	sec_debugfs_exit(qm);
 	hisi_qm_stop(qm, QM_NORMAL);
 err_probe_uninit:
-	sec_show_last_regs_uninit(qm);
 	sec_probe_uninit(qm);
 err_qm_uninit:
 	sec_qm_uninit(qm);
@@ -1296,11 +1299,6 @@ static void sec_remove(struct pci_dev *pdev)
 	sec_debugfs_exit(qm);
 
 	(void)hisi_qm_stop(qm, QM_NORMAL);
-
-	if (qm->fun_type == QM_HW_PF)
-		sec_debug_regs_clear(qm);
-	sec_show_last_regs_uninit(qm);
-
 	sec_probe_uninit(qm);
 
 	sec_qm_uninit(qm);
diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index c94a7b20d07e6..befef0b0e6bbe 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -1149,8 +1149,6 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip)
 
 	hisi_zip->ctrl = ctrl;
 	ctrl->hisi_zip = hisi_zip;
-	qm->err_ini = &hisi_zip_err_ini;
-	qm->err_ini->err_info_init(qm);
 
 	ret = hisi_zip_set_user_domain_and_cache(qm);
 	if (ret)
@@ -1211,6 +1209,7 @@ static int hisi_zip_qm_init(struct hisi_qm *qm, struct pci_dev *pdev)
 		qm->qp_num = pf_q_num;
 		qm->debug.curr_qm_qp_num = pf_q_num;
 		qm->qm_list = &zip_devices;
+		qm->err_ini = &hisi_zip_err_ini;
 		if (pf_q_num_flag)
 			set_bit(QM_MODULE_PARAM, &qm->misc_ctl);
 	} else if (qm->fun_type == QM_HW_VF && qm->ver == QM_HW_V1) {
@@ -1277,6 +1276,16 @@ static int hisi_zip_probe_init(struct hisi_zip *hisi_zip)
 	return 0;
 }
 
+static void hisi_zip_probe_uninit(struct hisi_qm *qm)
+{
+	if (qm->fun_type == QM_HW_VF)
+		return;
+
+	hisi_zip_show_last_regs_uninit(qm);
+	hisi_zip_close_sva_prefetch(qm);
+	hisi_qm_dev_err_uninit(qm);
+}
+
 static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct hisi_zip *hisi_zip;
@@ -1303,7 +1312,7 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ret = hisi_qm_start(qm);
 	if (ret)
-		goto err_dev_err_uninit;
+		goto err_probe_uninit;
 
 	ret = hisi_zip_debugfs_init(qm);
 	if (ret)
@@ -1342,9 +1351,8 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	hisi_zip_debugfs_exit(qm);
 	hisi_qm_stop(qm, QM_NORMAL);
 
-err_dev_err_uninit:
-	hisi_zip_show_last_regs_uninit(qm);
-	hisi_qm_dev_err_uninit(qm);
+err_probe_uninit:
+	hisi_zip_probe_uninit(qm);
 
 err_qm_uninit:
 	hisi_zip_qm_uninit(qm);
@@ -1366,8 +1374,7 @@ static void hisi_zip_remove(struct pci_dev *pdev)
 
 	hisi_zip_debugfs_exit(qm);
 	hisi_qm_stop(qm, QM_NORMAL);
-	hisi_zip_show_last_regs_uninit(qm);
-	hisi_qm_dev_err_uninit(qm);
+	hisi_zip_probe_uninit(qm);
 	hisi_zip_qm_uninit(qm);
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 067/197] wifi: mt76: mt7915: add dummy HW offload of IEEE 802.11 fragmentation

[Sasha Levin]

From: Benjamin Lin <benjamin-jw.lin@mediatek.com>

[ Upstream commit f2cc859149240d910fdc6405717673e0b84bfda8 ]

Currently, CONNAC2 series do not support encryption for fragmented Tx frames.
Therefore, add dummy function mt7915_set_frag_threshold() to prevent SW
IEEE 802.11 fragmentation.

Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-16-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/init.c | 1 +
 drivers/net/wireless/mediatek/mt76/mt7915/main.c | 7 +++++++
 2 files changed, 8 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index a978f434dc5e6..511e0d04eb955 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -398,6 +398,7 @@ mt7915_init_wiphy(struct mt7915_phy *phy)
 	ieee80211_hw_set(hw, SUPPORTS_RX_DECAP_OFFLOAD);
 	ieee80211_hw_set(hw, SUPPORTS_MULTI_BSSID);
 	ieee80211_hw_set(hw, WANT_MONITOR_VIF);
+	ieee80211_hw_set(hw, SUPPORTS_TX_FRAG);
 
 	hw->max_tx_fragments = 4;
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 2624edbb59a1a..75f8854078ae6 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -1578,6 +1578,12 @@ mt7915_twt_teardown_request(struct ieee80211_hw *hw,
 	mutex_unlock(&dev->mt76.mutex);
 }
 
+static int
+mt7915_set_frag_threshold(struct ieee80211_hw *hw, u32 val)
+{
+	return 0;
+}
+
 static int
 mt7915_set_radar_background(struct ieee80211_hw *hw,
 			    struct cfg80211_chan_def *chandef)
@@ -1708,6 +1714,7 @@ const struct ieee80211_ops mt7915_ops = {
 	.sta_set_decap_offload = mt7915_sta_set_decap_offload,
 	.add_twt_setup = mt7915_mac_add_twt_setup,
 	.twt_teardown_request = mt7915_twt_teardown_request,
+	.set_frag_threshold = mt7915_set_frag_threshold,
 	CFG80211_TESTMODE_CMD(mt76_testmode_cmd)
 	CFG80211_TESTMODE_DUMP(mt76_testmode_dump)
 #ifdef CONFIG_MAC80211_DEBUGFS
-- 
2.43.0

[PATCH AUTOSEL 6.10 068/197] wifi: mt76: mt7915: hold dev->mt76.mutex while disabling tx worker

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 8f7152f10cb434f954aeff85ca1be9cd4d01912b ]

Prevent racing against other functions disabling the same worker

Link: https://patch.msgid.link/20240827093011.18621-17-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index 8008ce3fa6c7e..387d47e9fcd38 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1537,12 +1537,14 @@ void mt7915_mac_reset_work(struct work_struct *work)
 		set_bit(MT76_RESET, &phy2->mt76->state);
 		cancel_delayed_work_sync(&phy2->mt76->mac_work);
 	}
+
+	mutex_lock(&dev->mt76.mutex);
+
 	mt76_worker_disable(&dev->mt76.tx_worker);
 	mt76_for_each_q_rx(&dev->mt76, i)
 		napi_disable(&dev->mt76.napi[i]);
 	napi_disable(&dev->mt76.tx_napi);
 
-	mutex_lock(&dev->mt76.mutex);
 
 	if (mtk_wed_device_active(&dev->mt76.mmio.wed))
 		mtk_wed_device_stop(&dev->mt76.mmio.wed);
-- 
2.43.0

[PATCH AUTOSEL 6.10 069/197] net: tls: wait for async completion on last message

[Sasha Levin]

From: Sascha Hauer <s.hauer@pengutronix.de>

[ Upstream commit 54001d0f2fdbc7852136a00f3e6fc395a9547ae5 ]

When asynchronous encryption is used KTLS sends out the final data at
proto->close time. This becomes problematic when the task calling
close() receives a signal. In this case it can happen that
tcp_sendmsg_locked() called at close time returns -ERESTARTSYS and the
final data is not sent.

The described situation happens when KTLS is used in conjunction with
io_uring, as io_uring uses task_work_add() to add work to the current
userspace task. A discussion of the problem along with a reproducer can
be found in [1] and [2]

Fix this by waiting for the asynchronous encryption to be completed on
the final message. With this there is no data left to be sent at close
time.

[1] https://lore.kernel.org/all/20231010141932.GD3114228@pengutronix.de/
[2] https://lore.kernel.org/all/20240315100159.3898944-1-s.hauer@pengutronix.de/

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20240904-ktls-wait-async-v1-1-a62892833110@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/tls/tls_sw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c
index 305a412785f50..bbf26cc4f6ee2 100644
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -1201,7 +1201,7 @@ static int tls_sw_sendmsg_locked(struct sock *sk, struct msghdr *msg,
 
 	if (!num_async) {
 		goto send_end;
-	} else if (num_zc) {
+	} else if (num_zc || eor) {
 		int err;
 
 		/* Wait for pending encryptions to get completed */
-- 
2.43.0

[PATCH AUTOSEL 6.10 070/197] wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 498365e52bebcbc36a93279fe7e9d6aec8479cee ]

Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.

With this, fix the following warning:

elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/fw.h   | 2 +-
 drivers/net/wireless/marvell/mwifiex/scan.c | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h
index 3adc447b715f6..5b072120e3f21 100644
--- a/drivers/net/wireless/marvell/mwifiex/fw.h
+++ b/drivers/net/wireless/marvell/mwifiex/fw.h
@@ -1587,7 +1587,7 @@ struct host_cmd_ds_802_11_scan_rsp {
 
 struct host_cmd_ds_802_11_scan_ext {
 	u32   reserved;
-	u8    tlv_buffer[1];
+	u8    tlv_buffer[];
 } __packed;
 
 struct mwifiex_ie_types_bss_mode {
diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c
index 0326b121747cb..17ce84f5207e3 100644
--- a/drivers/net/wireless/marvell/mwifiex/scan.c
+++ b/drivers/net/wireless/marvell/mwifiex/scan.c
@@ -2530,8 +2530,7 @@ int mwifiex_ret_802_11_scan_ext(struct mwifiex_private *priv,
 	ext_scan_resp = &resp->params.ext_scan;
 
 	tlv = (void *)ext_scan_resp->tlv_buffer;
-	buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN
-					      - 1);
+	buf_left = le16_to_cpu(resp->size) - (sizeof(*ext_scan_resp) + S_DS_GEN);
 
 	while (buf_left >= sizeof(struct mwifiex_ie_types_header)) {
 		type = le16_to_cpu(tlv->type);
-- 
2.43.0

[PATCH AUTOSEL 6.10 071/197] netfs: Cancel dirty folios that have no storage destination

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 8f246b7c0a1be0882374f2ff831a61f0dbe77678 ]

Kafs wants to be able to cache the contents of directories (and symlinks),
but whilst these are downloaded from the server with the FS.FetchData RPC
op and similar, the same as for regular files, they can't be updated by
FS.StoreData, but rather have special operations (FS.MakeDir, etc.).

Now, rather than redownloading a directory's content after each change made
to that directory, kafs modifies the local blob.  This blob can be saved
out to the cache, and since it's using netfslib, kafs just marks the folios
dirty and lets ->writepages() on the directory take care of it, as for an
regular file.

This is fine as long as there's a cache as although the upload stream is
disabled, there's a cache stream to drive the procedure.  But if the cache
goes away in the meantime, suddenly there's no way do any writes and the
code gets confused, complains "R=%x: No submit" to dmesg and leaves the
dirty folio hanging.

Fix this by just cancelling the store of the folio if neither stream is
active.  (If there's no cache at the time of dirtying, we should just not
mark the folio dirty).

Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-23-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/netfs/write_issue.c       | 6 +++++-
 include/trace/events/netfs.h | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/netfs/write_issue.c b/fs/netfs/write_issue.c
index 32bc88bee5d18..3c7eb43a2ec69 100644
--- a/fs/netfs/write_issue.c
+++ b/fs/netfs/write_issue.c
@@ -408,13 +408,17 @@ static int netfs_write_folio(struct netfs_io_request *wreq,
 	folio_unlock(folio);
 
 	if (fgroup == NETFS_FOLIO_COPY_TO_CACHE) {
-		if (!fscache_resources_valid(&wreq->cache_resources)) {
+		if (!cache->avail) {
 			trace_netfs_folio(folio, netfs_folio_trace_cancel_copy);
 			netfs_issue_write(wreq, upload);
 			netfs_folio_written_back(folio);
 			return 0;
 		}
 		trace_netfs_folio(folio, netfs_folio_trace_store_copy);
+	} else if (!upload->avail && !cache->avail) {
+		trace_netfs_folio(folio, netfs_folio_trace_cancel_store);
+		netfs_folio_written_back(folio);
+		return 0;
 	} else if (!upload->construct) {
 		trace_netfs_folio(folio, netfs_folio_trace_store);
 	} else {
diff --git a/include/trace/events/netfs.h b/include/trace/events/netfs.h
index 24ec3434d32ee..102696abe8c9e 100644
--- a/include/trace/events/netfs.h
+++ b/include/trace/events/netfs.h
@@ -140,6 +140,7 @@
 	EM(netfs_streaming_cont_filled_page,	"mod-streamw-f+") \
 	/* The rest are for writeback */			\
 	EM(netfs_folio_trace_cancel_copy,	"cancel-copy")	\
+	EM(netfs_folio_trace_cancel_store,	"cancel-store")	\
 	EM(netfs_folio_trace_clear,		"clear")	\
 	EM(netfs_folio_trace_clear_cc,		"clear-cc")	\
 	EM(netfs_folio_trace_clear_g,		"clear-g")	\
-- 
2.43.0

[PATCH AUTOSEL 6.10 072/197] nfp: Use IRQF_NO_AUTOEN flag in request_irq()

[Sasha Levin]

From: Jinjie Ruan <ruanjinjie@huawei.com>

[ Upstream commit daaba19d357f0900b303a530ced96c78086267ea ]

disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-4-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
index 182ba0a8b095b..6e0929af0f725 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
@@ -821,14 +821,13 @@ nfp_net_prepare_vector(struct nfp_net *nn, struct nfp_net_r_vector *r_vec,
 
 	snprintf(r_vec->name, sizeof(r_vec->name),
 		 "%s-rxtx-%d", nfp_net_name(nn), idx);
-	err = request_irq(r_vec->irq_vector, r_vec->handler, 0, r_vec->name,
-			  r_vec);
+	err = request_irq(r_vec->irq_vector, r_vec->handler, IRQF_NO_AUTOEN,
+			  r_vec->name, r_vec);
 	if (err) {
 		nfp_net_napi_del(&nn->dp, r_vec);
 		nn_err(nn, "Error requesting IRQ %d\n", r_vec->irq_vector);
 		return err;
 	}
-	disable_irq(r_vec->irq_vector);
 
 	irq_set_affinity_hint(r_vec->irq_vector, &r_vec->affinity_mask);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 073/197] ALSA: usb-audio: Add input value sanity checks for standard types

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 901e85677ec0bb9a69fb9eab1feafe0c4eb7d07e ]

For an invalid input value that is out of the given range, currently
USB-audio driver corrects the value silently and accepts without
errors.  This is no wrong behavior, per se, but the recent kselftest
rather wants to have an error in such a case, hence a different
behavior is expected now.

This patch adds a sanity check at each control put for the standard
mixer types and returns an error if an invalid value is given.

Note that this covers only the standard mixer types.  The mixer quirks
that have own control callbacks would need different coverage.

Link: https://patch.msgid.link/20240806124651.28203-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/mixer.c | 35 +++++++++++++++++++++++++++--------
 sound/usb/mixer.h |  1 +
 2 files changed, 28 insertions(+), 8 deletions(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 8cc2d4937f340..197fd07e69edd 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1377,6 +1377,19 @@ static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval,
 
 #define get_min_max(cval, def)	get_min_max_with_quirks(cval, def, NULL)
 
+/* get the max value advertised via control API */
+static int get_max_exposed(struct usb_mixer_elem_info *cval)
+{
+	if (!cval->max_exposed) {
+		if (cval->res)
+			cval->max_exposed =
+				DIV_ROUND_UP(cval->max - cval->min, cval->res);
+		else
+			cval->max_exposed = cval->max - cval->min;
+	}
+	return cval->max_exposed;
+}
+
 /* get a feature/mixer unit info */
 static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol,
 				  struct snd_ctl_elem_info *uinfo)
@@ -1389,11 +1402,8 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol,
 	else
 		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
 	uinfo->count = cval->channels;
-	if (cval->val_type == USB_MIXER_BOOLEAN ||
-	    cval->val_type == USB_MIXER_INV_BOOLEAN) {
-		uinfo->value.integer.min = 0;
-		uinfo->value.integer.max = 1;
-	} else {
+	if (cval->val_type != USB_MIXER_BOOLEAN &&
+	    cval->val_type != USB_MIXER_INV_BOOLEAN) {
 		if (!cval->initialized) {
 			get_min_max_with_quirks(cval, 0, kcontrol);
 			if (cval->initialized && cval->dBmin >= cval->dBmax) {
@@ -1405,10 +1415,10 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol,
 					       &kcontrol->id);
 			}
 		}
-		uinfo->value.integer.min = 0;
-		uinfo->value.integer.max =
-			DIV_ROUND_UP(cval->max - cval->min, cval->res);
 	}
+
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = get_max_exposed(cval);
 	return 0;
 }
 
@@ -1449,6 +1459,7 @@ static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol,
 				 struct snd_ctl_elem_value *ucontrol)
 {
 	struct usb_mixer_elem_info *cval = kcontrol->private_data;
+	int max_val = get_max_exposed(cval);
 	int c, cnt, val, oval, err;
 	int changed = 0;
 
@@ -1461,6 +1472,8 @@ static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol,
 			if (err < 0)
 				return filter_error(cval, err);
 			val = ucontrol->value.integer.value[cnt];
+			if (val < 0 || val > max_val)
+				return -EINVAL;
 			val = get_abs_value(cval, val);
 			if (oval != val) {
 				snd_usb_set_cur_mix_value(cval, c + 1, cnt, val);
@@ -1474,6 +1487,8 @@ static int mixer_ctl_feature_put(struct snd_kcontrol *kcontrol,
 		if (err < 0)
 			return filter_error(cval, err);
 		val = ucontrol->value.integer.value[0];
+		if (val < 0 || val > max_val)
+			return -EINVAL;
 		val = get_abs_value(cval, val);
 		if (val != oval) {
 			snd_usb_set_cur_mix_value(cval, 0, 0, val);
@@ -2337,6 +2352,8 @@ static int mixer_ctl_procunit_put(struct snd_kcontrol *kcontrol,
 	if (err < 0)
 		return filter_error(cval, err);
 	val = ucontrol->value.integer.value[0];
+	if (val < 0 || val > get_max_exposed(cval))
+		return -EINVAL;
 	val = get_abs_value(cval, val);
 	if (val != oval) {
 		set_cur_ctl_value(cval, cval->control << 8, val);
@@ -2699,6 +2716,8 @@ static int mixer_ctl_selector_put(struct snd_kcontrol *kcontrol,
 	if (err < 0)
 		return filter_error(cval, err);
 	val = ucontrol->value.enumerated.item[0];
+	if (val < 0 || val >= cval->max) /* here cval->max = # elements */
+		return -EINVAL;
 	val = get_abs_value(cval, val);
 	if (val != oval) {
 		set_cur_ctl_value(cval, cval->control << 8, val);
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index d43895c1ae5c6..167fbfcf01ace 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -88,6 +88,7 @@ struct usb_mixer_elem_info {
 	int channels;
 	int val_type;
 	int min, max, res;
+	int max_exposed; /* control API exposes the value in 0..max_exposed */
 	int dBmin, dBmax;
 	int cached;
 	int cache_val[MAX_CHANNELS];
-- 
2.43.0

[PATCH AUTOSEL 6.10 074/197] x86/ioapic: Handle allocation failures gracefully

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 830802a0fea8fb39d3dc9fb7d6b5581e1343eb1f ]

Breno observed panics when using failslab under certain conditions during
runtime:

   can not alloc irq_pin_list (-1,0,20)
   Kernel panic - not syncing: IO-APIC: failed to add irq-pin. Can not proceed

   panic+0x4e9/0x590
   mp_irqdomain_alloc+0x9ab/0xa80
   irq_domain_alloc_irqs_locked+0x25d/0x8d0
   __irq_domain_alloc_irqs+0x80/0x110
   mp_map_pin_to_irq+0x645/0x890
   acpi_register_gsi_ioapic+0xe6/0x150
   hpet_open+0x313/0x480

That's a pointless panic which is a leftover of the historic IO/APIC code
which panic'ed during early boot when the interrupt allocation failed.

The only place which might justify panic is the PIT/HPET timer_check() code
which tries to figure out whether the timer interrupt is delivered through
the IO/APIC. But that code does not require to handle interrupt allocation
failures. If the interrupt cannot be allocated then timer delivery fails
and it either panics due to that or falls back to legacy mode.

Cure this by removing the panic wrapper around __add_pin_to_irq_node() and
making mp_irqdomain_alloc() aware of the failure condition and handle it as
any other failure in this function gracefully.

Reported-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Breno Leitao <leitao@debian.org>
Tested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/all/ZqfJmUF8sXIyuSHN@gmail.com
Link: https://lore.kernel.org/all/20240802155440.275200843@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/io_apic.c | 46 ++++++++++++++++------------------
 1 file changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 477b740b2f267..d1ec1dcb637af 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -352,27 +352,26 @@ static void ioapic_mask_entry(int apic, int pin)
  * shared ISA-space IRQs, so we have to support them. We are super
  * fast in the common case, and fast for shared ISA-space IRQs.
  */
-static int __add_pin_to_irq_node(struct mp_chip_data *data,
-				 int node, int apic, int pin)
+static bool add_pin_to_irq_node(struct mp_chip_data *data, int node, int apic, int pin)
 {
 	struct irq_pin_list *entry;
 
-	/* don't allow duplicates */
-	for_each_irq_pin(entry, data->irq_2_pin)
+	/* Don't allow duplicates */
+	for_each_irq_pin(entry, data->irq_2_pin) {
 		if (entry->apic == apic && entry->pin == pin)
-			return 0;
+			return true;
+	}
 
 	entry = kzalloc_node(sizeof(struct irq_pin_list), GFP_ATOMIC, node);
 	if (!entry) {
-		pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
-		       node, apic, pin);
-		return -ENOMEM;
+		pr_err("Cannot allocate irq_pin_list (%d,%d,%d)\n", node, apic, pin);
+		return false;
 	}
+
 	entry->apic = apic;
 	entry->pin = pin;
 	list_add_tail(&entry->list, &data->irq_2_pin);
-
-	return 0;
+	return true;
 }
 
 static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin)
@@ -387,13 +386,6 @@ static void __remove_pin_from_irq(struct mp_chip_data *data, int apic, int pin)
 		}
 }
 
-static void add_pin_to_irq_node(struct mp_chip_data *data,
-				int node, int apic, int pin)
-{
-	if (__add_pin_to_irq_node(data, node, apic, pin))
-		panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
-}
-
 /*
  * Reroute an IRQ to a different pin.
  */
@@ -1002,8 +994,7 @@ static int alloc_isa_irq_from_domain(struct irq_domain *domain,
 	if (irq_data && irq_data->parent_data) {
 		if (!mp_check_pin_attr(irq, info))
 			return -EBUSY;
-		if (__add_pin_to_irq_node(irq_data->chip_data, node, ioapic,
-					  info->ioapic.pin))
+		if (!add_pin_to_irq_node(irq_data->chip_data, node, ioapic, info->ioapic.pin))
 			return -ENOMEM;
 	} else {
 		info->flags |= X86_IRQ_ALLOC_LEGACY;
@@ -3017,10 +3008,8 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
 		return -ENOMEM;
 
 	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info);
-	if (ret < 0) {
-		kfree(data);
-		return ret;
-	}
+	if (ret < 0)
+		goto free_data;
 
 	INIT_LIST_HEAD(&data->irq_2_pin);
 	irq_data->hwirq = info->ioapic.pin;
@@ -3029,7 +3018,10 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
 	irq_data->chip_data = data;
 	mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info);
 
-	add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin);
+	if (!add_pin_to_irq_node(data, ioapic_alloc_attr_node(info), ioapic, pin)) {
+		ret = -ENOMEM;
+		goto free_irqs;
+	}
 
 	mp_preconfigure_entry(data);
 	mp_register_handler(virq, data->is_level);
@@ -3044,6 +3036,12 @@ int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq,
 		    ioapic, mpc_ioapic_id(ioapic), pin, virq,
 		    data->is_level, data->active_low);
 	return 0;
+
+free_irqs:
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+free_data:
+	kfree(data);
+	return ret;
 }
 
 void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq,
-- 
2.43.0

[PATCH AUTOSEL 6.10 075/197] x86/apic: Remove logical destination mode for 64-bit

[Sasha Levin]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 838ba7733e4e3a94a928e8d0a058de1811a58621 ]

Logical destination mode of the local APIC is used for systems with up to
8 CPUs. It has an advantage over physical destination mode as it allows to
target multiple CPUs at once with IPIs.

That advantage was definitely worth it when systems with up to 8 CPUs
were state of the art for servers and workstations, but that's history.

Aside of that there are systems which fail to work with logical destination
mode as the ACPI/DMI quirks show and there are AMD Zen1 systems out there
which fail when interrupt remapping is enabled as reported by Rob and
Christian. The latter problem can be cured by firmware updates, but not all
OEMs distribute the required changes.

Physical destination mode is guaranteed to work because it is the only way
to get a CPU up and running via the INIT/INIT/STARTUP sequence.

As the number of CPUs keeps increasing, logical destination mode becomes a
less used code path so there is no real good reason to keep it around.

Therefore remove logical destination mode support for 64-bit and default to
physical destination mode.

Reported-by: Rob Newcater <rob@durendal.co.uk>
Reported-by: Christian Heusel <christian@heusel.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Rob Newcater <rob@durendal.co.uk>
Link: https://lore.kernel.org/all/877cd5u671.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/apic.h         |   8 --
 arch/x86/kernel/apic/apic_flat_64.c | 119 ++--------------------------
 2 files changed, 7 insertions(+), 120 deletions(-)

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 9327eb00e96d0..be2045a18e69b 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -345,20 +345,12 @@ extern struct apic *apic;
  * APIC drivers are probed based on how they are listed in the .apicdrivers
  * section. So the order is important and enforced by the ordering
  * of different apic driver files in the Makefile.
- *
- * For the files having two apic drivers, we use apic_drivers()
- * to enforce the order with in them.
  */
 #define apic_driver(sym)					\
 	static const struct apic *__apicdrivers_##sym __used		\
 	__aligned(sizeof(struct apic *))			\
 	__section(".apicdrivers") = { &sym }
 
-#define apic_drivers(sym1, sym2)					\
-	static struct apic *__apicdrivers_##sym1##sym2[2] __used	\
-	__aligned(sizeof(struct apic *))				\
-	__section(".apicdrivers") = { &sym1, &sym2 }
-
 extern struct apic *__apicdrivers[], *__apicdrivers_end[];
 
 /*
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index f37ad3392fec9..e0308d8c4e6c2 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -8,129 +8,25 @@
  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
  * James Cleverdon.
  */
-#include <linux/cpumask.h>
 #include <linux/export.h>
-#include <linux/acpi.h>
 
-#include <asm/jailhouse_para.h>
 #include <asm/apic.h>
 
 #include "local.h"
 
-static struct apic apic_physflat;
-static struct apic apic_flat;
-
-struct apic *apic __ro_after_init = &apic_flat;
-EXPORT_SYMBOL_GPL(apic);
-
-static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
-{
-	return 1;
-}
-
-static void _flat_send_IPI_mask(unsigned long mask, int vector)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__default_send_IPI_dest_field(mask, vector, APIC_DEST_LOGICAL);
-	local_irq_restore(flags);
-}
-
-static void flat_send_IPI_mask(const struct cpumask *cpumask, int vector)
-{
-	unsigned long mask = cpumask_bits(cpumask)[0];
-
-	_flat_send_IPI_mask(mask, vector);
-}
-
-static void
-flat_send_IPI_mask_allbutself(const struct cpumask *cpumask, int vector)
-{
-	unsigned long mask = cpumask_bits(cpumask)[0];
-	int cpu = smp_processor_id();
-
-	if (cpu < BITS_PER_LONG)
-		__clear_bit(cpu, &mask);
-
-	_flat_send_IPI_mask(mask, vector);
-}
-
-static u32 flat_get_apic_id(u32 x)
+static u32 physflat_get_apic_id(u32 x)
 {
 	return (x >> 24) & 0xFF;
 }
 
-static int flat_probe(void)
+static int physflat_probe(void)
 {
 	return 1;
 }
 
-static struct apic apic_flat __ro_after_init = {
-	.name				= "flat",
-	.probe				= flat_probe,
-	.acpi_madt_oem_check		= flat_acpi_madt_oem_check,
-
-	.dest_mode_logical		= true,
-
-	.disable_esr			= 0,
-
-	.init_apic_ldr			= default_init_apic_ldr,
-	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
-
-	.max_apic_id			= 0xFE,
-	.get_apic_id			= flat_get_apic_id,
-
-	.calc_dest_apicid		= apic_flat_calc_apicid,
-
-	.send_IPI			= default_send_IPI_single,
-	.send_IPI_mask			= flat_send_IPI_mask,
-	.send_IPI_mask_allbutself	= flat_send_IPI_mask_allbutself,
-	.send_IPI_allbutself		= default_send_IPI_allbutself,
-	.send_IPI_all			= default_send_IPI_all,
-	.send_IPI_self			= default_send_IPI_self,
-	.nmi_to_offline_cpu		= true,
-
-	.read				= native_apic_mem_read,
-	.write				= native_apic_mem_write,
-	.eoi				= native_apic_mem_eoi,
-	.icr_read			= native_apic_icr_read,
-	.icr_write			= native_apic_icr_write,
-	.wait_icr_idle			= apic_mem_wait_icr_idle,
-	.safe_wait_icr_idle		= apic_mem_wait_icr_idle_timeout,
-};
-
-/*
- * Physflat mode is used when there are more than 8 CPUs on a system.
- * We cannot use logical delivery in this case because the mask
- * overflows, so use physical mode.
- */
 static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-#ifdef CONFIG_ACPI
-	/*
-	 * Quirk: some x86_64 machines can only use physical APIC mode
-	 * regardless of how many processors are present (x86_64 ES7000
-	 * is an example).
-	 */
-	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
-		(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
-		printk(KERN_DEBUG "system APIC only can use physical flat");
-		return 1;
-	}
-
-	if (!strncmp(oem_id, "IBM", 3) && !strncmp(oem_table_id, "EXA", 3)) {
-		printk(KERN_DEBUG "IBM Summit detected, will use apic physical");
-		return 1;
-	}
-#endif
-
-	return 0;
-}
-
-static int physflat_probe(void)
-{
-	return apic == &apic_physflat || num_possible_cpus() > 8 || jailhouse_paravirt();
+	return 1;
 }
 
 static struct apic apic_physflat __ro_after_init = {
@@ -146,7 +42,7 @@ static struct apic apic_physflat __ro_after_init = {
 	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
 
 	.max_apic_id			= 0xFE,
-	.get_apic_id			= flat_get_apic_id,
+	.get_apic_id			= physflat_get_apic_id,
 
 	.calc_dest_apicid		= apic_default_calc_apicid,
 
@@ -166,8 +62,7 @@ static struct apic apic_physflat __ro_after_init = {
 	.wait_icr_idle			= apic_mem_wait_icr_idle,
 	.safe_wait_icr_idle		= apic_mem_wait_icr_idle_timeout,
 };
+apic_driver(apic_physflat);
 
-/*
- * We need to check for physflat first, so this order is important.
- */
-apic_drivers(apic_physflat, apic_flat);
+struct apic *apic __ro_after_init = &apic_physflat;
+EXPORT_SYMBOL_GPL(apic);
-- 
2.43.0

[PATCH AUTOSEL 6.10 076/197] ALSA: usb-audio: Support multiple control interfaces

[Sasha Levin]

From: Karol Kosik <k.kosik@outlook.com>

[ Upstream commit 6aa8700150f7dc62f60b4cf5b1624e2e3d9ed78e ]

Registering Numark Party Mix II fails with error 'bogus bTerminalLink 1'.
The problem stems from the driver not being able to find input/output
terminals required to configure audio streaming. The information about
those terminals is stored in AudioControl Interface. Numark device
contains 2 AudioControl Interfaces and the driver checks only one of them.

According to the USB standard, a device can have multiple audio functions,
each represented by Audio Interface Collection. Every audio function is
considered to be closed box and will contain unique AudioControl Interface
and zero or more AudioStreaming and MIDIStreaming Interfaces.

The Numark device adheres to the standard and defines two audio functions:
- MIDIStreaming function
- AudioStreaming function
It starts with MIDI function, followed by the audio function. The driver
saves the first AudioControl Interface in `snd_usb_audio` structure
associated with the entire device. It then attempts to use this interface
to query for terminals and clocks. However, this fails because the correct
information is stored in the second AudioControl Interface, defined in the
second Audio Interface Collection.

This patch introduces a structure holding association between each
MIDI/Audio Interface and its corresponding AudioControl Interface,
instead of relying on AudioControl Interface defined for the entire
device. This structure is populated during usb probing phase and leveraged
later when querying for terminals and when sending USB requests.

Alternative solutions considered include:
- defining a quirk for Numark where the order of interface is manually
changed, or terminals are hardcoded in the driver. This solution would
have fixed only this model, though it seems that device is USB compliant,
and it also seems that other devices from this company may be affected.
What's more, it looks like products from other manufacturers have similar
problems, i.e. Rane One DJ console
- keeping a list of all AudioControl Interfaces and querying all of them
to find required information. That would have solved my problem and have
low probability of breaking other devices, as we would always start with
the same logic of querying first AudioControl Interface. This solution
would not have followed the standard though.

This patch preserves the `snd_usb_audio.ctrl_intf` variable, which holds
the first AudioControl Interface, and uses it as a fallback when some
interfaces are not parsed correctly and lack an associated AudioControl
Interface, i.e., when configured via quirks.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=217865
Signed-off-by: Karol Kosik <k.kosik@outlook.com>
Link: https://patch.msgid.link/AS8P190MB1285893F4735C8B32AD3886BEC852@AS8P190MB1285.EURP190.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/card.c           |  2 ++
 sound/usb/clock.c          | 62 ++++++++++++++++++++++++--------------
 sound/usb/format.c         |  6 ++--
 sound/usb/helper.c         | 34 +++++++++++++++++++++
 sound/usb/helper.h         | 10 ++++--
 sound/usb/mixer.c          |  2 +-
 sound/usb/mixer_quirks.c   | 17 ++++++-----
 sound/usb/mixer_scarlett.c |  4 +--
 sound/usb/power.c          |  3 +-
 sound/usb/power.h          |  1 +
 sound/usb/stream.c         | 21 ++++++++-----
 sound/usb/usbaudio.h       | 12 ++++++++
 12 files changed, 127 insertions(+), 47 deletions(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index bdb04fa37a71d..778de9244f1e7 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -206,6 +206,8 @@ static int snd_usb_create_stream(struct snd_usb_audio *chip, int ctrlif, int int
 		return -EINVAL;
 	}
 
+	snd_usb_add_ctrl_interface_link(chip, interface, ctrlif);
+
 	if (! snd_usb_parse_audio_interface(chip, interface)) {
 		usb_set_interface(dev, interface, 0); /* reset the current interface */
 		return usb_driver_claim_interface(&usb_audio_driver, iface,
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 60fcb872a80b6..8f85200292f3f 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -76,11 +76,14 @@ static bool validate_clock_multiplier(void *p, int id, int proto)
 }
 
 #define DEFINE_FIND_HELPER(name, obj, validator, type2, type3)		\
-static obj *name(struct snd_usb_audio *chip, int id, int proto)	\
+static obj *name(struct snd_usb_audio *chip, int id,	\
+				const struct audioformat *fmt)	\
 {									\
-	return find_uac_clock_desc(chip->ctrl_intf, id, validator,	\
-				   proto == UAC_VERSION_3 ? (type3) : (type2), \
-				   proto);				\
+	struct usb_host_interface *ctrl_intf =	\
+		snd_usb_find_ctrl_interface(chip, fmt->iface); \
+	return find_uac_clock_desc(ctrl_intf, id, validator,	\
+				   fmt->protocol == UAC_VERSION_3 ? (type3) : (type2), \
+				   fmt->protocol);				\
 }
 
 DEFINE_FIND_HELPER(snd_usb_find_clock_source,
@@ -93,16 +96,19 @@ DEFINE_FIND_HELPER(snd_usb_find_clock_multiplier,
 		   union uac23_clock_multiplier_desc, validate_clock_multiplier,
 		   UAC2_CLOCK_MULTIPLIER, UAC3_CLOCK_MULTIPLIER);
 
-static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_id)
+static int uac_clock_selector_get_val(struct snd_usb_audio *chip,
+				int selector_id, int iface_no)
 {
+	struct usb_host_interface *ctrl_intf;
 	unsigned char buf;
 	int ret;
 
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no);
 	ret = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
 			      UAC2_CS_CUR,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      UAC2_CX_CLOCK_SELECTOR << 8,
-			      snd_usb_ctrl_intf(chip) | (selector_id << 8),
+			      snd_usb_ctrl_intf(ctrl_intf) | (selector_id << 8),
 			      &buf, sizeof(buf));
 
 	if (ret < 0)
@@ -111,16 +117,18 @@ static int uac_clock_selector_get_val(struct snd_usb_audio *chip, int selector_i
 	return buf;
 }
 
-static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_id,
-					unsigned char pin)
+static int uac_clock_selector_set_val(struct snd_usb_audio *chip,
+					int selector_id, unsigned char pin, int iface_no)
 {
+	struct usb_host_interface *ctrl_intf;
 	int ret;
 
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no);
 	ret = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0),
 			      UAC2_CS_CUR,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
 			      UAC2_CX_CLOCK_SELECTOR << 8,
-			      snd_usb_ctrl_intf(chip) | (selector_id << 8),
+			      snd_usb_ctrl_intf(ctrl_intf) | (selector_id << 8),
 			      &pin, sizeof(pin));
 	if (ret < 0)
 		return ret;
@@ -132,7 +140,7 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i
 		return -EINVAL;
 	}
 
-	ret = uac_clock_selector_get_val(chip, selector_id);
+	ret = uac_clock_selector_get_val(chip, selector_id, iface_no);
 	if (ret < 0)
 		return ret;
 
@@ -155,8 +163,10 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip,
 	unsigned char data;
 	struct usb_device *dev = chip->dev;
 	union uac23_clock_source_desc *cs_desc;
+	struct usb_host_interface *ctrl_intf;
 
-	cs_desc = snd_usb_find_clock_source(chip, source_id, fmt->protocol);
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface);
+	cs_desc = snd_usb_find_clock_source(chip, source_id, fmt);
 	if (!cs_desc)
 		return false;
 
@@ -191,7 +201,7 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip,
 			err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
 					      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 					      UAC2_CS_CONTROL_CLOCK_VALID << 8,
-					      snd_usb_ctrl_intf(chip) | (source_id << 8),
+					      snd_usb_ctrl_intf(ctrl_intf) | (source_id << 8),
 					      &data, sizeof(data));
 			if (err < 0) {
 				dev_warn(&dev->dev,
@@ -217,8 +227,10 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip,
 	struct usb_device *dev = chip->dev;
 	u32 bmControls;
 	union uac23_clock_source_desc *cs_desc;
+	struct usb_host_interface *ctrl_intf;
 
-	cs_desc = snd_usb_find_clock_source(chip, source_id, fmt->protocol);
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface);
+	cs_desc = snd_usb_find_clock_source(chip, source_id, fmt);
 	if (!cs_desc)
 		return false;
 
@@ -235,7 +247,7 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip,
 	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      UAC2_CS_CONTROL_CLOCK_VALID << 8,
-			      snd_usb_ctrl_intf(chip) | (source_id << 8),
+			      snd_usb_ctrl_intf(ctrl_intf) | (source_id << 8),
 			      &data, sizeof(data));
 
 	if (err < 0) {
@@ -274,7 +286,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 	}
 
 	/* first, see if the ID we're looking at is a clock source already */
-	source = snd_usb_find_clock_source(chip, entity_id, proto);
+	source = snd_usb_find_clock_source(chip, entity_id, fmt);
 	if (source) {
 		entity_id = GET_VAL(source, proto, bClockID);
 		if (validate && !uac_clock_source_is_valid(chip, fmt,
@@ -287,7 +299,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 		return entity_id;
 	}
 
-	selector = snd_usb_find_clock_selector(chip, entity_id, proto);
+	selector = snd_usb_find_clock_selector(chip, entity_id, fmt);
 	if (selector) {
 		pins = GET_VAL(selector, proto, bNrInPins);
 		clock_id = GET_VAL(selector, proto, bClockID);
@@ -317,7 +329,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 
 		/* the entity ID we are looking at is a selector.
 		 * find out what it currently selects */
-		ret = uac_clock_selector_get_val(chip, clock_id);
+		ret = uac_clock_selector_get_val(chip, clock_id, fmt->iface);
 		if (ret < 0) {
 			if (!chip->autoclock)
 				return ret;
@@ -346,7 +358,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 			if (chip->quirk_flags & QUIRK_FLAG_SKIP_CLOCK_SELECTOR ||
 			    !writeable)
 				return ret;
-			err = uac_clock_selector_set_val(chip, entity_id, cur);
+			err = uac_clock_selector_set_val(chip, entity_id, cur, fmt->iface);
 			if (err < 0) {
 				if (pins == 1) {
 					usb_audio_dbg(chip,
@@ -377,7 +389,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 			if (ret < 0)
 				continue;
 
-			err = uac_clock_selector_set_val(chip, entity_id, i);
+			err = uac_clock_selector_set_val(chip, entity_id, i, fmt->iface);
 			if (err < 0)
 				continue;
 
@@ -391,7 +403,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 	}
 
 	/* FIXME: multipliers only act as pass-thru element for now */
-	multiplier = snd_usb_find_clock_multiplier(chip, entity_id, proto);
+	multiplier = snd_usb_find_clock_multiplier(chip, entity_id, fmt);
 	if (multiplier)
 		return __uac_clock_find_source(chip, fmt,
 					       GET_VAL(multiplier, proto, bCSourceID),
@@ -491,11 +503,13 @@ static int get_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
 	struct usb_device *dev = chip->dev;
 	__le32 data;
 	int err;
+	struct usb_host_interface *ctrl_intf;
 
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, iface);
 	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      UAC2_CS_CONTROL_SAM_FREQ << 8,
-			      snd_usb_ctrl_intf(chip) | (clock << 8),
+			      snd_usb_ctrl_intf(ctrl_intf) | (clock << 8),
 			      &data, sizeof(data));
 	if (err < 0) {
 		dev_warn(&dev->dev, "%d:%d: cannot get freq (v2/v3): err %d\n",
@@ -524,8 +538,10 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip,
 	__le32 data;
 	int err;
 	union uac23_clock_source_desc *cs_desc;
+	struct usb_host_interface *ctrl_intf;
 
-	cs_desc = snd_usb_find_clock_source(chip, clock, fmt->protocol);
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, fmt->iface);
+	cs_desc = snd_usb_find_clock_source(chip, clock, fmt);
 
 	if (!cs_desc)
 		return 0;
@@ -544,7 +560,7 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip,
 	err = snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC2_CS_CUR,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_OUT,
 			      UAC2_CS_CONTROL_SAM_FREQ << 8,
-			      snd_usb_ctrl_intf(chip) | (clock << 8),
+			      snd_usb_ctrl_intf(ctrl_intf) | (clock << 8),
 			      &data, sizeof(data));
 	if (err < 0)
 		return err;
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 3b45d0ee76938..61c4aca8be09e 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -548,7 +548,9 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip,
 	unsigned char tmp[2], *data;
 	int nr_triplets, data_size, ret = 0, ret_l6;
 	int clock = snd_usb_clock_find_source(chip, fp, false);
+	struct usb_host_interface *ctrl_intf;
 
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, fp->iface);
 	if (clock < 0) {
 		dev_err(&dev->dev,
 			"%s(): unable to find clock source (clock %d)\n",
@@ -560,7 +562,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip,
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      UAC2_CS_CONTROL_SAM_FREQ << 8,
-			      snd_usb_ctrl_intf(chip) | (clock << 8),
+			      snd_usb_ctrl_intf(ctrl_intf) | (clock << 8),
 			      tmp, sizeof(tmp));
 
 	if (ret < 0) {
@@ -595,7 +597,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip,
 	ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_RANGE,
 			      USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
 			      UAC2_CS_CONTROL_SAM_FREQ << 8,
-			      snd_usb_ctrl_intf(chip) | (clock << 8),
+			      snd_usb_ctrl_intf(ctrl_intf) | (clock << 8),
 			      data, data_size);
 
 	if (ret < 0) {
diff --git a/sound/usb/helper.c b/sound/usb/helper.c
index bf80e55d013a8..72b671fb2c84c 100644
--- a/sound/usb/helper.c
+++ b/sound/usb/helper.c
@@ -130,3 +130,37 @@ snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting
 		return NULL;
 	return usb_altnum_to_altsetting(iface, altsetting);
 }
+
+int snd_usb_add_ctrl_interface_link(struct snd_usb_audio *chip, int ifnum,
+		int ctrlif)
+{
+	struct usb_device *dev = chip->dev;
+	struct usb_host_interface *host_iface;
+
+	if (chip->num_intf_to_ctrl >= MAX_CARD_INTERFACES) {
+		dev_info(&dev->dev, "Too many interfaces assigned to the single USB-audio card\n");
+		return -EINVAL;
+	}
+
+	/* find audiocontrol interface */
+	host_iface = &usb_ifnum_to_if(dev, ctrlif)->altsetting[0];
+
+	chip->intf_to_ctrl[chip->num_intf_to_ctrl].interface = ifnum;
+	chip->intf_to_ctrl[chip->num_intf_to_ctrl].ctrl_intf = host_iface;
+	chip->num_intf_to_ctrl++;
+
+	return 0;
+}
+
+struct usb_host_interface *snd_usb_find_ctrl_interface(struct snd_usb_audio *chip,
+							int ifnum)
+{
+	int i;
+
+	for (i = 0; i < chip->num_intf_to_ctrl; ++i)
+		if (chip->intf_to_ctrl[i].interface == ifnum)
+			return chip->intf_to_ctrl[i].ctrl_intf;
+
+	/* Fallback to first audiocontrol interface */
+	return chip->ctrl_intf;
+}
diff --git a/sound/usb/helper.h b/sound/usb/helper.h
index e2b51ec96ec62..0372e050b3dc4 100644
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -17,6 +17,12 @@ unsigned char snd_usb_parse_datainterval(struct snd_usb_audio *chip,
 struct usb_host_interface *
 snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting);
 
+int snd_usb_add_ctrl_interface_link(struct snd_usb_audio *chip, int ifnum,
+		int ctrlif);
+
+struct usb_host_interface *snd_usb_find_ctrl_interface(struct snd_usb_audio *chip,
+								int ifnum);
+
 /*
  * retrieve usb_interface descriptor from the host interface
  * (conditional for compatibility with the older API)
@@ -28,9 +34,9 @@ snd_usb_get_host_interface(struct snd_usb_audio *chip, int ifnum, int altsetting
 
 #define snd_usb_get_speed(dev) ((dev)->speed)
 
-static inline int snd_usb_ctrl_intf(struct snd_usb_audio *chip)
+static inline int snd_usb_ctrl_intf(struct usb_host_interface *ctrl_intf)
 {
-	return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
+	return get_iface_desc(ctrl_intf)->bInterfaceNumber;
 }
 
 /* in validate.c */
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 197fd07e69edd..017b50322d88f 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -728,7 +728,7 @@ static int get_cluster_channels_v3(struct mixer_build *state, unsigned int clust
 			UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR,
 			USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			cluster_id,
-			snd_usb_ctrl_intf(state->chip),
+			snd_usb_ctrl_intf(state->mixer->hostif),
 			&c_header, sizeof(c_header));
 	if (err < 0)
 		goto error;
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 212b5e6443d88..1d8bf1ecfed44 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -1043,7 +1043,7 @@ static int snd_ftu_eff_switch_init(struct usb_mixer_interface *mixer,
 	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC_GET_CUR,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			      pval & 0xff00,
-			      snd_usb_ctrl_intf(mixer->chip) | ((pval & 0xff) << 8),
+			      snd_usb_ctrl_intf(mixer->hostif) | ((pval & 0xff) << 8),
 			      value, 2);
 	if (err < 0)
 		return err;
@@ -1077,7 +1077,7 @@ static int snd_ftu_eff_switch_update(struct usb_mixer_elem_list *list)
 			      UAC_SET_CUR,
 			      USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
 			      pval & 0xff00,
-			      snd_usb_ctrl_intf(chip) | ((pval & 0xff) << 8),
+			      snd_usb_ctrl_intf(list->mixer->hostif) | ((pval & 0xff) << 8),
 			      value, 2);
 	snd_usb_unlock_shutdown(chip);
 	return err;
@@ -2115,24 +2115,25 @@ static int dell_dock_mixer_create(struct usb_mixer_interface *mixer)
 	return 0;
 }
 
-static void dell_dock_init_vol(struct snd_usb_audio *chip, int ch, int id)
+static void dell_dock_init_vol(struct usb_mixer_interface *mixer, int ch, int id)
 {
+	struct snd_usb_audio *chip = mixer->chip;
 	u16 buf = 0;
 
 	snd_usb_ctl_msg(chip->dev, usb_sndctrlpipe(chip->dev, 0), UAC_SET_CUR,
 			USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
 			(UAC_FU_VOLUME << 8) | ch,
-			snd_usb_ctrl_intf(chip) | (id << 8),
+			snd_usb_ctrl_intf(mixer->hostif) | (id << 8),
 			&buf, 2);
 }
 
 static int dell_dock_mixer_init(struct usb_mixer_interface *mixer)
 {
 	/* fix to 0dB playback volumes */
-	dell_dock_init_vol(mixer->chip, 1, 16);
-	dell_dock_init_vol(mixer->chip, 2, 16);
-	dell_dock_init_vol(mixer->chip, 1, 19);
-	dell_dock_init_vol(mixer->chip, 2, 19);
+	dell_dock_init_vol(mixer, 1, 16);
+	dell_dock_init_vol(mixer, 2, 16);
+	dell_dock_init_vol(mixer, 1, 19);
+	dell_dock_init_vol(mixer, 2, 19);
 	return 0;
 }
 
diff --git a/sound/usb/mixer_scarlett.c b/sound/usb/mixer_scarlett.c
index 0d6e4f15bf77c..ff548041679bb 100644
--- a/sound/usb/mixer_scarlett.c
+++ b/sound/usb/mixer_scarlett.c
@@ -460,7 +460,7 @@ static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl,
 	struct snd_usb_audio *chip = elem->head.mixer->chip;
 	unsigned char buf[2 * MAX_CHANNELS] = {0, };
 	int wValue = (elem->control << 8) | elem->idx_off;
-	int idx = snd_usb_ctrl_intf(chip) | (elem->head.id << 8);
+	int idx = snd_usb_ctrl_intf(elem->head.mixer->hostif) | (elem->head.id << 8);
 	int err;
 
 	err = snd_usb_ctl_msg(chip->dev,
@@ -1002,7 +1002,7 @@ int snd_scarlett_controls_create(struct usb_mixer_interface *mixer)
 	err = snd_usb_ctl_msg(mixer->chip->dev,
 		usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR,
 		USB_RECIP_INTERFACE | USB_TYPE_CLASS |
-		USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->chip) |
+		USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->hostif) |
 		(0x29 << 8), sample_rate_buffer, 4);
 	if (err < 0)
 		return err;
diff --git a/sound/usb/power.c b/sound/usb/power.c
index 606a2cb23eab6..66bd4daa68fd5 100644
--- a/sound/usb/power.c
+++ b/sound/usb/power.c
@@ -40,6 +40,7 @@ snd_usb_find_power_domain(struct usb_host_interface *ctrl_iface,
 					le16_to_cpu(pd_desc->waRecoveryTime1);
 				pd->pd_d2d0_rec =
 					le16_to_cpu(pd_desc->waRecoveryTime2);
+				pd->ctrl_iface = ctrl_iface;
 				return pd;
 			}
 		}
@@ -57,7 +58,7 @@ int snd_usb_power_domain_set(struct snd_usb_audio *chip,
 	unsigned char current_state;
 	int err, idx;
 
-	idx = snd_usb_ctrl_intf(chip) | (pd->pd_id << 8);
+	idx = snd_usb_ctrl_intf(pd->ctrl_iface) | (pd->pd_id << 8);
 
 	err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0),
 			      UAC2_CS_CUR,
diff --git a/sound/usb/power.h b/sound/usb/power.h
index 396e3e51440a7..1fa92ad0ca925 100644
--- a/sound/usb/power.h
+++ b/sound/usb/power.h
@@ -6,6 +6,7 @@ struct snd_usb_power_domain {
 	int pd_id;              /* UAC3 Power Domain ID */
 	int pd_d1d0_rec;        /* D1 to D0 recovery time */
 	int pd_d2d0_rec;        /* D2 to D0 recovery time */
+	struct usb_host_interface *ctrl_iface; /* Control interface */
 };
 
 enum {
diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index e14c725acebf2..d70c140813d68 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -713,10 +713,13 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip,
 	struct usb_device *dev = chip->dev;
 	struct uac_format_type_i_continuous_descriptor *fmt;
 	unsigned int num_channels = 0, chconfig = 0;
+	struct usb_host_interface *ctrl_intf;
 	struct audioformat *fp;
 	int clock = 0;
 	u64 format;
 
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no);
+
 	/* get audio formats */
 	if (protocol == UAC_VERSION_1) {
 		struct uac1_as_header_descriptor *as =
@@ -740,7 +743,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip,
 
 		format = le16_to_cpu(as->wFormatTag); /* remember the format value */
 
-		iterm = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+		iterm = snd_usb_find_input_terminal_descriptor(ctrl_intf,
 							       as->bTerminalLink,
 							       protocol);
 		if (iterm) {
@@ -776,7 +779,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip,
 		 * lookup the terminal associated to this interface
 		 * to extract the clock
 		 */
-		input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+		input_term = snd_usb_find_input_terminal_descriptor(ctrl_intf,
 								    as->bTerminalLink,
 								    protocol);
 		if (input_term) {
@@ -786,7 +789,7 @@ snd_usb_get_audioformat_uac12(struct snd_usb_audio *chip,
 			goto found_clock;
 		}
 
-		output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+		output_term = snd_usb_find_output_terminal_descriptor(ctrl_intf,
 								      as->bTerminalLink,
 								      protocol);
 		if (output_term) {
@@ -870,6 +873,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip,
 	struct uac3_cluster_header_descriptor *cluster;
 	struct uac3_as_header_descriptor *as = NULL;
 	struct uac3_hc_descriptor_header hc_header;
+	struct usb_host_interface *ctrl_intf;
 	struct snd_pcm_chmap_elem *chmap;
 	struct snd_usb_power_domain *pd;
 	unsigned char badd_profile;
@@ -881,6 +885,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip,
 	int err;
 
 	badd_profile = chip->badd_profile;
+	ctrl_intf = snd_usb_find_ctrl_interface(chip, iface_no);
 
 	if (badd_profile >= UAC3_FUNCTION_SUBCLASS_GENERIC_IO) {
 		unsigned int maxpacksize =
@@ -966,7 +971,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip,
 			UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR,
 			USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			cluster_id,
-			snd_usb_ctrl_intf(chip),
+			snd_usb_ctrl_intf(ctrl_intf),
 			&hc_header, sizeof(hc_header));
 	if (err < 0)
 		return ERR_PTR(err);
@@ -990,7 +995,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip,
 			UAC3_CS_REQ_HIGH_CAPABILITY_DESCRIPTOR,
 			USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
 			cluster_id,
-			snd_usb_ctrl_intf(chip),
+			snd_usb_ctrl_intf(ctrl_intf),
 			cluster, wLength);
 	if (err < 0) {
 		kfree(cluster);
@@ -1011,7 +1016,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip,
 	 * lookup the terminal associated to this interface
 	 * to extract the clock
 	 */
-	input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
+	input_term = snd_usb_find_input_terminal_descriptor(ctrl_intf,
 							    as->bTerminalLink,
 							    UAC_VERSION_3);
 	if (input_term) {
@@ -1019,7 +1024,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip,
 		goto found_clock;
 	}
 
-	output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
+	output_term = snd_usb_find_output_terminal_descriptor(ctrl_intf,
 							      as->bTerminalLink,
 							      UAC_VERSION_3);
 	if (output_term) {
@@ -1068,7 +1073,7 @@ snd_usb_get_audioformat_uac3(struct snd_usb_audio *chip,
 							       UAC_VERSION_3,
 							       iface_no);
 
-		pd = snd_usb_find_power_domain(chip->ctrl_intf,
+		pd = snd_usb_find_power_domain(ctrl_intf,
 					       as->bTerminalLink);
 
 		/* ok, let's parse further... */
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 43d4029edab46..b0f042c996087 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -21,6 +21,15 @@ struct media_intf_devnode;
 
 #define MAX_CARD_INTERFACES	16
 
+/*
+ * Structure holding assosiation between Audio Control Interface
+ * and given Streaming or Midi Interface.
+ */
+struct snd_intf_to_ctrl {
+	u8 interface;
+	struct usb_host_interface *ctrl_intf;
+};
+
 struct snd_usb_audio {
 	int index;
 	struct usb_device *dev;
@@ -63,6 +72,9 @@ struct snd_usb_audio {
 	struct usb_host_interface *ctrl_intf;	/* the audio control interface */
 	struct media_device *media_dev;
 	struct media_intf_devnode *ctl_intf_media_devnode;
+
+	unsigned int num_intf_to_ctrl;
+	struct snd_intf_to_ctrl intf_to_ctrl[MAX_CARD_INTERFACES];
 };
 
 #define USB_AUDIO_IFACE_UNUSED	((void *)-1L)
-- 
2.43.0

[PATCH AUTOSEL 6.10 077/197] ALSA: usb-audio: Define macros for quirk table entries

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 0c3ad39b791c2ecf718afcaca30e5ceafa939d5c ]

Many entries in the USB-audio quirk tables have relatively complex
expressions.  For improving the readability, introduce a few macros.
Those are applied in the following patch.

Link: https://patch.msgid.link/20240814134844.2726-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks-table.h | 77 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index aaa6a515d0f8a..e3a25f4f68792 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -35,6 +35,83 @@
 	.bInterfaceClass = USB_CLASS_AUDIO, \
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIOCONTROL
 
+/* Quirk .driver_info, followed by the definition of the quirk entry;
+ * put like QUIRK_DRIVER_INFO { ... } in each entry of the quirk table
+ */
+#define QUIRK_DRIVER_INFO \
+	.driver_info = (unsigned long)&(const struct snd_usb_audio_quirk)
+
+/*
+ * Macros for quirk data entries
+ */
+
+/* Quirk data entry for ignoring the interface */
+#define QUIRK_DATA_IGNORE(_ifno) \
+	.ifnum = (_ifno), .type = QUIRK_IGNORE_INTERFACE
+/* Quirk data entry for a standard audio interface */
+#define QUIRK_DATA_STANDARD_AUDIO(_ifno) \
+	.ifnum = (_ifno), .type = QUIRK_AUDIO_STANDARD_INTERFACE
+/* Quirk data entry for a standard MIDI interface */
+#define QUIRK_DATA_STANDARD_MIDI(_ifno) \
+	.ifnum = (_ifno), .type = QUIRK_MIDI_STANDARD_INTERFACE
+/* Quirk data entry for a standard mixer interface */
+#define QUIRK_DATA_STANDARD_MIXER(_ifno) \
+	.ifnum = (_ifno), .type = QUIRK_AUDIO_STANDARD_MIXER
+
+/* Quirk data entry for Yamaha MIDI */
+#define QUIRK_DATA_MIDI_YAMAHA(_ifno) \
+	.ifnum = (_ifno), .type = QUIRK_MIDI_YAMAHA
+/* Quirk data entry for Edirol UAxx */
+#define QUIRK_DATA_EDIROL_UAXX(_ifno) \
+	.ifnum = (_ifno), .type = QUIRK_AUDIO_EDIROL_UAXX
+/* Quirk data entry for raw bytes interface */
+#define QUIRK_DATA_RAW_BYTES(_ifno) \
+	.ifnum = (_ifno), .type = QUIRK_MIDI_RAW_BYTES
+
+/* Quirk composite array terminator */
+#define QUIRK_COMPOSITE_END	{ .ifnum = -1 }
+
+/* Quirk data entry for composite quirks;
+ * followed by the quirk array that is terminated with QUIRK_COMPOSITE_END
+ * e.g. QUIRK_DATA_COMPOSITE { { quirk1 }, { quirk2 },..., QUIRK_COMPOSITE_END }
+ */
+#define QUIRK_DATA_COMPOSITE \
+	.ifnum = QUIRK_ANY_INTERFACE, \
+	.type = QUIRK_COMPOSITE, \
+	.data = &(const struct snd_usb_audio_quirk[])
+
+/* Quirk data entry for a fixed audio endpoint;
+ * followed by audioformat definition
+ * e.g. QUIRK_DATA_AUDIOFORMAT(n) { .formats = xxx, ... }
+ */
+#define QUIRK_DATA_AUDIOFORMAT(_ifno)	    \
+	.ifnum = (_ifno),		    \
+	.type = QUIRK_AUDIO_FIXED_ENDPOINT, \
+	.data = &(const struct audioformat)
+
+/* Quirk data entry for a fixed MIDI endpoint;
+ * followed by snd_usb_midi_endpoint_info definition
+ * e.g. QUIRK_DATA_MIDI_FIXED_ENDPOINT(n) { .out_cables = x, .in_cables = y }
+ */
+#define QUIRK_DATA_MIDI_FIXED_ENDPOINT(_ifno) \
+	.ifnum = (_ifno),		      \
+	.type = QUIRK_MIDI_FIXED_ENDPOINT,    \
+	.data = &(const struct snd_usb_midi_endpoint_info)
+/* Quirk data entry for a MIDIMAN MIDI endpoint */
+#define QUIRK_DATA_MIDI_MIDIMAN(_ifno) \
+	.ifnum = (_ifno),	       \
+	.type = QUIRK_MIDI_MIDIMAN,    \
+	.data = &(const struct snd_usb_midi_endpoint_info)
+/* Quirk data entry for a EMAGIC MIDI endpoint */
+#define QUIRK_DATA_MIDI_EMAGIC(_ifno) \
+	.ifnum = (_ifno),	      \
+	.type = QUIRK_MIDI_EMAGIC,    \
+	.data = &(const struct snd_usb_midi_endpoint_info)
+
+/*
+ * Here we go... the quirk table definition begins:
+ */
+
 /* FTDI devices */
 {
 	USB_DEVICE(0x0403, 0xb8d8),
-- 
2.43.0

[PATCH AUTOSEL 6.10 078/197] ALSA: usb-audio: Replace complex quirk lines with macros

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit d79e13f8e8abb5cd3a2a0f9fc9bc3fc750c5b06f ]

Apply the newly introduced macros for reduce the complex expressions
and cast in the quirk table definitions.  It results in a significant
code reduction, too.

There should be no functional changes.

Link: https://patch.msgid.link/20240814134844.2726-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks-table.h | 2210 ++++++++++----------------------------
 1 file changed, 593 insertions(+), 1617 deletions(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index e3a25f4f68792..8d22de8bc2a96 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -115,7 +115,7 @@
 /* FTDI devices */
 {
 	USB_DEVICE(0x0403, 0xb8d8),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "STARR LABS", */
 		/* .product_name = "Starr Labs MIDI USB device", */
 		.ifnum = 0,
@@ -126,10 +126,8 @@
 {
 	/* Creative BT-D1 */
 	USB_DEVICE(0x041e, 0x0005),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = 1,
-		.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-		.data = &(const struct audioformat) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_AUDIOFORMAT(1) {
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
 			.channels = 2,
 			.iface = 1,
@@ -164,18 +162,11 @@
  */
 {
 	USB_AUDIO_DEVICE(0x041e, 0x4095),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(2) },
 			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(3) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 2,
 					.fmt_bits = 16,
@@ -191,9 +182,7 @@
 					.rate_table = (unsigned int[]) { 48000 },
 				},
 			},
-			{
-				.ifnum = -1
-			},
+			QUIRK_COMPOSITE_END
 		},
 	},
 },
@@ -205,31 +194,18 @@
  */
 {
 	USB_DEVICE(0x0424, 0xb832),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Standard Microsystems Corp.",
 		.product_name = "HP Wireless Audio",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			/* Mixer */
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE,
-			},
+			{ QUIRK_DATA_IGNORE(0) },
 			/* Playback */
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE,
-			},
+			{ QUIRK_DATA_IGNORE(1) },
 			/* Capture */
-			{
-				.ifnum = 2,
-				.type = QUIRK_IGNORE_INTERFACE,
-			},
+			{ QUIRK_DATA_IGNORE(2) },
 			/* HID Device, .ifnum = 3 */
-			{
-				.ifnum = -1,
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -252,20 +228,18 @@
 
 #define YAMAHA_DEVICE(id, name) { \
 	USB_DEVICE(0x0499, id), \
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \
+	QUIRK_DRIVER_INFO { \
 		.vendor_name = "Yamaha", \
 		.product_name = name, \
-		.ifnum = QUIRK_ANY_INTERFACE, \
-		.type = QUIRK_MIDI_YAMAHA \
+		QUIRK_DATA_MIDI_YAMAHA(QUIRK_ANY_INTERFACE) \
 	} \
 }
 #define YAMAHA_INTERFACE(id, intf, name) { \
 	USB_DEVICE_VENDOR_SPEC(0x0499, id), \
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { \
+	QUIRK_DRIVER_INFO { \
 		.vendor_name = "Yamaha", \
 		.product_name = name, \
-		.ifnum = intf, \
-		.type = QUIRK_MIDI_YAMAHA \
+		QUIRK_DATA_MIDI_YAMAHA(intf) \
 	} \
 }
 YAMAHA_DEVICE(0x1000, "UX256"),
@@ -353,135 +327,67 @@ YAMAHA_DEVICE(0x105d, NULL),
 YAMAHA_DEVICE(0x1718, "P-125"),
 {
 	USB_DEVICE(0x0499, 0x1503),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Yamaha", */
 		/* .product_name = "MOX6/MOX8", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_YAMAHA
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			{ QUIRK_DATA_MIDI_YAMAHA(3) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0499, 0x1507),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Yamaha", */
 		/* .product_name = "THR10", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_YAMAHA
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			{ QUIRK_DATA_MIDI_YAMAHA(3) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0499, 0x1509),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Yamaha", */
 		/* .product_name = "Steinberg UR22", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_YAMAHA
-			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			{ QUIRK_DATA_MIDI_YAMAHA(3) },
+			{ QUIRK_DATA_IGNORE(4) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0499, 0x150a),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Yamaha", */
 		/* .product_name = "THR5A", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_YAMAHA
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			{ QUIRK_DATA_MIDI_YAMAHA(3) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0499, 0x150c),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Yamaha", */
 		/* .product_name = "THR10C", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_YAMAHA
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			{ QUIRK_DATA_MIDI_YAMAHA(3) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -515,7 +421,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	               USB_DEVICE_ID_MATCH_INT_CLASS,
 	.idVendor = 0x0499,
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.ifnum = QUIRK_ANY_INTERFACE,
 		.type = QUIRK_AUTODETECT
 	}
@@ -526,16 +432,12 @@ YAMAHA_DEVICE(0x7010, "UB99"),
  */
 {
 	USB_DEVICE(0x0582, 0x0000),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "UA-100",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 4,
 					.iface = 0,
@@ -550,9 +452,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 2,
 					.iface = 1,
@@ -567,106 +467,66 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0007,
 					.in_cables  = 0x0007
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0002),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UM-4",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x000f,
 					.in_cables  = 0x000f
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0003),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "SC-8850",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x003f,
 					.in_cables  = 0x003f
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0004),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "U-8",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0005,
 					.in_cables  = 0x0005
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -674,152 +534,92 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	/* Has ID 0x0099 when not in "Advanced Driver" mode.
 	 * The UM-2EX has only one input, but we cannot detect this. */
 	USB_DEVICE(0x0582, 0x0005),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UM-2",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0003,
 					.in_cables  = 0x0003
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0007),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "SC-8820",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0013,
 					.in_cables  = 0x0013
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0008),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "PC-300",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x009d when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0009),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UM-1",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x000b),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "SK-500",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0013,
 					.in_cables  = 0x0013
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -827,31 +627,19 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	/* thanks to Emiliano Grilli <emillo@libero.it>
 	 * for helping researching this data */
 	USB_DEVICE(0x0582, 0x000c),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "SC-D70",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
 			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0007,
 					.in_cables  = 0x0007
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -865,35 +653,23 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * the 96kHz sample rate.
 	 */
 	USB_DEVICE(0x0582, 0x0010),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UA-5",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x0013 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0012),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "XV-5050",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -902,12 +678,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0015 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0014),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UM-880",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x01ff,
 			.in_cables  = 0x01ff
 		}
@@ -916,74 +690,48 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0017 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0016),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "SD-90",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x000f,
 					.in_cables  = 0x000f
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x001c when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x001b),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "MMP-2",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x001e when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x001d),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "V-SYNTH",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -992,12 +740,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0024 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0023),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UM-550",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x003f,
 			.in_cables  = 0x003f
 		}
@@ -1010,20 +756,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * and no MIDI.
 	 */
 	USB_DEVICE(0x0582, 0x0025),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UA-20",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 2,
 					.iface = 1,
@@ -1038,9 +777,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 2,
 					.iface = 2,
@@ -1055,28 +792,22 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x0028 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0027),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "SD-20",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0003,
 			.in_cables  = 0x0007
 		}
@@ -1085,12 +816,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x002a when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0029),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "SD-80",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x000f,
 			.in_cables  = 0x000f
 		}
@@ -1103,39 +832,24 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * but offers only 16-bit PCM and no MIDI.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x0582, 0x002b),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UA-700",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_EDIROL_UAXX(1) },
+			{ QUIRK_DATA_EDIROL_UAXX(2) },
+			{ QUIRK_DATA_EDIROL_UAXX(3) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x002e when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x002d),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "XV-2020",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1144,12 +858,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0030 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x002f),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "VariOS",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0007,
 			.in_cables  = 0x0007
 		}
@@ -1158,12 +870,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0034 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0033),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "PCR",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0003,
 			.in_cables  = 0x0007
 		}
@@ -1175,12 +885,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * later revisions use IDs 0x0054 and 0x00a2.
 	 */
 	USB_DEVICE(0x0582, 0x0037),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "Digital Piano",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1193,39 +901,24 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * and no MIDI.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x0582, 0x003b),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "BOSS",
 		.product_name = "GS-10",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			{ QUIRK_DATA_STANDARD_MIDI(3) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x0041 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0040),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "GI-20",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1234,12 +927,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0043 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0042),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "RS-70",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1248,36 +939,24 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0049 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0047),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "EDIROL", */
 		/* .product_name = "UR-80", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			/* in the 96 kHz modes, only interface 1 is there */
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x004a when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0048),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "EDIROL", */
 		/* .product_name = "UR-80", */
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0003,
 			.in_cables  = 0x0007
 		}
@@ -1286,35 +965,23 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x004e when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x004c),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "PCR-A",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x004f when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x004d),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "PCR-A",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0003,
 			.in_cables  = 0x0007
 		}
@@ -1326,76 +993,52 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * is standard compliant, but has only 16-bit PCM.
 	 */
 	USB_DEVICE(0x0582, 0x0050),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UA-3FX",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0052),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UM-1SX",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE
+		QUIRK_DATA_STANDARD_MIDI(0)
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0060),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "EXR Series",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE
+		QUIRK_DATA_STANDARD_MIDI(0)
 	}
 },
 {
 	/* has ID 0x0066 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0064),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "EDIROL", */
 		/* .product_name = "PCR-1", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x0067 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0065),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "EDIROL", */
 		/* .product_name = "PCR-1", */
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0003
 		}
@@ -1404,12 +1047,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x006e when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x006d),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "FANTOM-X",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1422,39 +1063,24 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * offers only 16-bit PCM at 44.1 kHz and no MIDI.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x0582, 0x0074),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UA-25",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_EDIROL_UAXX(0) },
+			{ QUIRK_DATA_EDIROL_UAXX(1) },
+			{ QUIRK_DATA_EDIROL_UAXX(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* has ID 0x0076 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0075),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "BOSS",
 		.product_name = "DR-880",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1463,12 +1089,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x007b when not in "Advanced Driver" mode */
 	USB_DEVICE_VENDOR_SPEC(0x0582, 0x007a),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		/* "RD" or "RD-700SX"? */
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0003,
 			.in_cables  = 0x0003
 		}
@@ -1477,12 +1101,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x0081 when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x0080),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Roland",
 		.product_name = "G-70",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1491,12 +1113,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* has ID 0x008c when not in "Advanced Driver" mode */
 	USB_DEVICE(0x0582, 0x008b),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "PC-50",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1508,56 +1128,31 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * is standard compliant, but has only 16-bit PCM and no MIDI.
 	 */
 	USB_DEVICE(0x0582, 0x00a3),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UA-4FX",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_EDIROL_UAXX(0) },
+			{ QUIRK_DATA_EDIROL_UAXX(1) },
+			{ QUIRK_DATA_EDIROL_UAXX(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* Edirol M-16DX */
 	USB_DEVICE(0x0582, 0x00c4),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -1567,37 +1162,22 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * offers only 16-bit PCM at 44.1 kHz and no MIDI.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x0582, 0x00e6),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "EDIROL",
 		.product_name = "UA-25EX",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_EDIROL_UAXX
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_EDIROL_UAXX(0) },
+			{ QUIRK_DATA_EDIROL_UAXX(1) },
+			{ QUIRK_DATA_EDIROL_UAXX(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* Edirol UM-3G */
 	USB_DEVICE_VENDOR_SPEC(0x0582, 0x0108),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = 0,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(0) {
 			.out_cables = 0x0007,
 			.in_cables  = 0x0007
 		}
@@ -1606,45 +1186,29 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* BOSS ME-25 */
 	USB_DEVICE(0x0582, 0x0113),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* only 44.1 kHz works at the moment */
 	USB_DEVICE(0x0582, 0x0120),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Roland", */
 		/* .product_name = "OCTO-CAPTURE", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 10,
 					.iface = 0,
@@ -1660,9 +1224,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 12,
 					.iface = 1,
@@ -1678,40 +1240,26 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_IGNORE(3) },
+			{ QUIRK_DATA_IGNORE(4) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* only 44.1 kHz works at the moment */
 	USB_DEVICE(0x0582, 0x012f),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Roland", */
 		/* .product_name = "QUAD-CAPTURE", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 4,
 					.iface = 0,
@@ -1727,9 +1275,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 6,
 					.iface = 1,
@@ -1745,54 +1291,32 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_IGNORE(3) },
+			{ QUIRK_DATA_IGNORE(4) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0582, 0x0159),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Roland", */
 		/* .product_name = "UA-22", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(2) {
 					.out_cables = 0x0001,
 					.in_cables = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -1800,19 +1324,19 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* UA101 and co are supported by another driver */
 {
 	USB_DEVICE(0x0582, 0x0044), /* UA-1000 high speed */
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.ifnum = QUIRK_NODEV_INTERFACE
 	},
 },
 {
 	USB_DEVICE(0x0582, 0x007d), /* UA-101 high speed */
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.ifnum = QUIRK_NODEV_INTERFACE
 	},
 },
 {
 	USB_DEVICE(0x0582, 0x008d), /* UA-101 full speed */
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.ifnum = QUIRK_NODEV_INTERFACE
 	},
 },
@@ -1823,7 +1347,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	               USB_DEVICE_ID_MATCH_INT_CLASS,
 	.idVendor = 0x0582,
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.ifnum = QUIRK_ANY_INTERFACE,
 		.type = QUIRK_AUTODETECT
 	}
@@ -1838,12 +1362,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * compliant USB MIDI ports for external MIDI and controls.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x06f8, 0xb000),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Hercules",
 		.product_name = "DJ Console (WE)",
-		.ifnum = 4,
-		.type = QUIRK_MIDI_FIXED_ENDPOINT,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_FIXED_ENDPOINT(4) {
 			.out_cables = 0x0001,
 			.in_cables = 0x0001
 		}
@@ -1853,12 +1375,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* Midiman/M-Audio devices */
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x1002),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "MidiSport 2x2",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) {
 			.out_cables = 0x0003,
 			.in_cables  = 0x0003
 		}
@@ -1866,12 +1386,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x1011),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "MidiSport 1x1",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1879,12 +1397,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x1015),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "Keystation",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -1892,12 +1408,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x1021),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "MidiSport 4x4",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) {
 			.out_cables = 0x000f,
 			.in_cables  = 0x000f
 		}
@@ -1910,12 +1424,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * Thanks to Olaf Giesbrecht <Olaf_Giesbrecht@yahoo.de>
 	 */
 	USB_DEVICE_VER(0x0763, 0x1031, 0x0100, 0x0109),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "MidiSport 8x8",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) {
 			.out_cables = 0x01ff,
 			.in_cables  = 0x01ff
 		}
@@ -1923,12 +1435,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x1033),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "MidiSport 8x8",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) {
 			.out_cables = 0x01ff,
 			.in_cables  = 0x01ff
 		}
@@ -1936,12 +1446,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x1041),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "MidiSport 2x4",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(QUIRK_ANY_INTERFACE) {
 			.out_cables = 0x000f,
 			.in_cables  = 0x0003
 		}
@@ -1949,76 +1457,41 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x2001),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "Quattro",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			/*
 			 * Interfaces 0-2 are "Windows-compatible", 16-bit only,
 			 * and share endpoints with the other interfaces.
 			 * Ignore them.  The other interfaces can do 24 bits,
 			 * but captured samples are big-endian (see usbaudio.c).
 			 */
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 5,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 6,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 7,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 8,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 9,
-				.type = QUIRK_MIDI_MIDIMAN,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
+			{ QUIRK_DATA_IGNORE(2) },
+			{ QUIRK_DATA_IGNORE(3) },
+			{ QUIRK_DATA_STANDARD_AUDIO(4) },
+			{ QUIRK_DATA_STANDARD_AUDIO(5) },
+			{ QUIRK_DATA_IGNORE(6) },
+			{ QUIRK_DATA_STANDARD_AUDIO(7) },
+			{ QUIRK_DATA_STANDARD_AUDIO(8) },
+			{
+				QUIRK_DATA_MIDI_MIDIMAN(9) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x2003),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "AudioPhile",
-		.ifnum = 6,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(6) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -2026,12 +1499,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x2008),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "Ozone",
-		.ifnum = 3,
-		.type = QUIRK_MIDI_MIDIMAN,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_MIDIMAN(3) {
 			.out_cables = 0x0001,
 			.in_cables  = 0x0001
 		}
@@ -2039,93 +1510,45 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x200d),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "M-Audio",
 		.product_name = "OmniStudio",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 5,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 6,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 7,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 8,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 9,
-				.type = QUIRK_MIDI_MIDIMAN,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
+			{ QUIRK_DATA_IGNORE(2) },
+			{ QUIRK_DATA_IGNORE(3) },
+			{ QUIRK_DATA_STANDARD_AUDIO(4) },
+			{ QUIRK_DATA_STANDARD_AUDIO(5) },
+			{ QUIRK_DATA_IGNORE(6) },
+			{ QUIRK_DATA_STANDARD_AUDIO(7) },
+			{ QUIRK_DATA_STANDARD_AUDIO(8) },
+			{
+				QUIRK_DATA_MIDI_MIDIMAN(9) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x0763, 0x2019),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "M-Audio", */
 		/* .product_name = "Ozone Academic", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_MIDIMAN,
-				.data = & (const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_MIDIMAN(3) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -2135,21 +1558,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x2030),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "M-Audio", */
 		/* .product_name = "Fast Track C400", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(1) },
 			/* Playback */
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 6,
 					.iface = 2,
@@ -2173,9 +1589,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 			},
 			/* Capture */
 			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(3) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 4,
 					.iface = 3,
@@ -2197,30 +1611,21 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.clock = 0x80,
 				}
 			},
-			/* MIDI */
-			{
-				.ifnum = -1 /* Interface = 4 */
-			}
+			/* MIDI: Interface = 4*/
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x2031),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "M-Audio", */
 		/* .product_name = "Fast Track C600", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(1) },
 			/* Playback */
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 2,
@@ -2244,9 +1649,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 			},
 			/* Capture */
 			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(3) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 6,
 					.iface = 3,
@@ -2268,29 +1671,20 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.clock = 0x80,
 				}
 			},
-			/* MIDI */
-			{
-				.ifnum = -1 /* Interface = 4 */
-			}
+			/* MIDI: Interface = 4 */
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x2080),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "M-Audio", */
 		/* .product_name = "Fast Track Ultra", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 1,
@@ -2312,9 +1706,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 2,
@@ -2336,28 +1728,19 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			/* interface 3 (MIDI) is standard compliant */
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0763, 0x2081),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "M-Audio", */
 		/* .product_name = "Fast Track Ultra 8R", */
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 1,
@@ -2379,9 +1762,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 2,
@@ -2403,9 +1784,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			/* interface 3 (MIDI) is standard compliant */
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -2413,21 +1792,19 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* Casio devices */
 {
 	USB_DEVICE(0x07cf, 0x6801),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Casio",
 		.product_name = "PL-40R",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_YAMAHA
+		QUIRK_DATA_MIDI_YAMAHA(0)
 	}
 },
 {
 	/* this ID is used by several devices without a product ID */
 	USB_DEVICE(0x07cf, 0x6802),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Casio",
 		.product_name = "Keyboard",
-		.ifnum = 0,
-		.type = QUIRK_MIDI_YAMAHA
+		QUIRK_DATA_MIDI_YAMAHA(0)
 	}
 },
 
@@ -2440,23 +1817,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	.idVendor = 0x07fd,
 	.idProduct = 0x0001,
 	.bDeviceSubClass = 2,
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "MOTU",
 		.product_name = "Fastlane",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_MIDI_RAW_BYTES
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_RAW_BYTES(0) },
+			{ QUIRK_DATA_IGNORE(1) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -2464,12 +1831,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* Emagic devices */
 {
 	USB_DEVICE(0x086a, 0x0001),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Emagic",
 		.product_name = "Unitor8",
-		.ifnum = 2,
-		.type = QUIRK_MIDI_EMAGIC,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_EMAGIC(2) {
 			.out_cables = 0x80ff,
 			.in_cables  = 0x80ff
 		}
@@ -2477,12 +1842,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE(0x086a, 0x0002),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Emagic",
 		/* .product_name = "AMT8", */
-		.ifnum = 2,
-		.type = QUIRK_MIDI_EMAGIC,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_EMAGIC(2) {
 			.out_cables = 0x80ff,
 			.in_cables  = 0x80ff
 		}
@@ -2490,12 +1853,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE(0x086a, 0x0003),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Emagic",
 		/* .product_name = "MT4", */
-		.ifnum = 2,
-		.type = QUIRK_MIDI_EMAGIC,
-		.data = & (const struct snd_usb_midi_endpoint_info) {
+		QUIRK_DATA_MIDI_EMAGIC(2) {
 			.out_cables = 0x800f,
 			.in_cables  = 0x8003
 		}
@@ -2505,38 +1866,35 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* KORG devices */
 {
 	USB_DEVICE_VENDOR_SPEC(0x0944, 0x0200),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "KORG, Inc.",
 		/* .product_name = "PANDORA PX5D", */
-		.ifnum = 3,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE,
+		QUIRK_DATA_STANDARD_MIDI(3)
 	}
 },
 
 {
 	USB_DEVICE_VENDOR_SPEC(0x0944, 0x0201),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "KORG, Inc.",
 		/* .product_name = "ToneLab ST", */
-		.ifnum = 3,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE,
+		QUIRK_DATA_STANDARD_MIDI(3)
 	}
 },
 
 {
 	USB_DEVICE_VENDOR_SPEC(0x0944, 0x0204),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "KORG, Inc.",
 		/* .product_name = "ToneLab EX", */
-		.ifnum = 3,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE,
+		QUIRK_DATA_STANDARD_MIDI(3)
 	}
 },
 
 /* AKAI devices */
 {
 	USB_DEVICE(0x09e8, 0x0062),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "AKAI",
 		.product_name = "MPD16",
 		.ifnum = 0,
@@ -2547,21 +1905,11 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* Akai MPC Element */
 	USB_DEVICE(0x09e8, 0x0021),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_MIDI_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_STANDARD_MIDI(1) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -2570,66 +1918,36 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* Steinberg MI2 */
 	USB_DEVICE_VENDOR_SPEC(0x0a4e, 0x2040),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
 			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = &(const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* Steinberg MI4 */
 	USB_DEVICE_VENDOR_SPEC(0x0a4e, 0x4040),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = & (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
 			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = &(const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -2637,34 +1955,31 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* TerraTec devices */
 {
 	USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0012),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "TerraTec",
 		.product_name = "PHASE 26",
-		.ifnum = 3,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE
+		QUIRK_DATA_STANDARD_MIDI(3)
 	}
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0013),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "TerraTec",
 		.product_name = "PHASE 26",
-		.ifnum = 3,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE
+		QUIRK_DATA_STANDARD_MIDI(3)
 	}
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0014),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "TerraTec",
 		.product_name = "PHASE 26",
-		.ifnum = 3,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE
+		QUIRK_DATA_STANDARD_MIDI(3)
 	}
 },
 {
 	USB_DEVICE(0x0ccd, 0x0035),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Miditech",
 		.product_name = "Play'n Roll",
 		.ifnum = 0,
@@ -2679,7 +1994,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* Novation EMS devices */
 {
 	USB_DEVICE_VENDOR_SPEC(0x1235, 0x0001),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Novation",
 		.product_name = "ReMOTE Audio/XStation",
 		.ifnum = 4,
@@ -2688,7 +2003,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x1235, 0x0002),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Novation",
 		.product_name = "Speedio",
 		.ifnum = 3,
@@ -2697,38 +2012,29 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 },
 {
 	USB_DEVICE(0x1235, 0x000a),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Novation", */
 		/* .product_name = "Nocturn", */
-		.ifnum = 0,
-		.type = QUIRK_MIDI_RAW_BYTES
+		QUIRK_DATA_RAW_BYTES(0)
 	}
 },
 {
 	USB_DEVICE(0x1235, 0x000e),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		/* .vendor_name = "Novation", */
 		/* .product_name = "Launchpad", */
-		.ifnum = 0,
-		.type = QUIRK_MIDI_RAW_BYTES
+		QUIRK_DATA_RAW_BYTES(0)
 	}
 },
 {
 	USB_DEVICE(0x1235, 0x0010),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Focusrite",
 		.product_name = "Saffire 6 USB",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 4,
 					.iface = 0,
@@ -2755,9 +2061,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 2,
 					.iface = 0,
@@ -2779,28 +2083,19 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_MIDI_RAW_BYTES
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_RAW_BYTES(1) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE(0x1235, 0x0018),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Novation",
 		.product_name = "Twitch",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = & (const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 4,
 					.iface = 0,
@@ -2819,19 +2114,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_MIDI_RAW_BYTES
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_RAW_BYTES(1) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	USB_DEVICE_VENDOR_SPEC(0x1235, 0x4661),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Novation",
 		.product_name = "ReMOTE25",
 		.ifnum = 0,
@@ -2843,25 +2133,16 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* VirusTI Desktop */
 	USB_DEVICE_VENDOR_SPEC(0x133e, 0x0815),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 3,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = &(const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(3) {
 					.out_cables = 0x0003,
 					.in_cables  = 0x0003
 				}
 			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_IGNORE(4) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -2889,7 +2170,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* QinHeng devices */
 {
 	USB_DEVICE(0x1a86, 0x752d),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "QinHeng",
 		.product_name = "CH345",
 		.ifnum = 1,
@@ -2903,7 +2184,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* Miditech devices */
 {
 	USB_DEVICE(0x4752, 0x0011),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Miditech",
 		.product_name = "Midistart-2",
 		.ifnum = 0,
@@ -2915,7 +2196,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* this ID used by both Miditech MidiStudio-2 and CME UF-x */
 	USB_DEVICE(0x7104, 0x2202),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.ifnum = 0,
 		.type = QUIRK_MIDI_CME
 	}
@@ -2925,20 +2206,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	/* Thanks to Clemens Ladisch <clemens@ladisch.de> */
 	USB_DEVICE(0x0dba, 0x1000),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Digidesign",
 		.product_name = "MBox",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]){
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+		QUIRK_DATA_COMPOSITE{
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3BE,
 					.channels = 2,
 					.iface = 1,
@@ -2959,9 +2233,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3BE,
 					.channels = 2,
 					.iface = 1,
@@ -2982,9 +2254,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -2992,24 +2262,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* DIGIDESIGN MBOX 2 */
 {
 	USB_DEVICE(0x0dba, 0x3000),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Digidesign",
 		.product_name = "Mbox 2",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3BE,
 					.channels = 2,
 					.iface = 2,
@@ -3027,15 +2287,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
+			{ QUIRK_DATA_IGNORE(3) },
 			{
-				.ifnum = 3,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
-				.formats = SNDRV_PCM_FMTBIT_S24_3BE,
+				QUIRK_DATA_AUDIOFORMAT(4) {
+					.formats = SNDRV_PCM_FMTBIT_S24_3BE,
 					.channels = 2,
 					.iface = 4,
 					.altsetting = 2,
@@ -3052,14 +2307,9 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
+			{ QUIRK_DATA_IGNORE(5) },
 			{
-				.ifnum = 5,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 6,
-				.type = QUIRK_MIDI_MIDIMAN,
-				.data = &(const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_MIDIMAN(6) {
 					.out_ep =  0x02,
 					.out_cables = 0x0001,
 					.in_ep = 0x81,
@@ -3067,33 +2317,21 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.in_cables = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 /* DIGIDESIGN MBOX 3 */
 {
 	USB_DEVICE(0x0dba, 0x5000),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Digidesign",
 		.product_name = "Mbox 3",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_IGNORE(1) },
 			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.fmt_bits = 24,
 					.channels = 4,
@@ -3120,9 +2358,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(3) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.fmt_bits = 24,
 					.channels = 4,
@@ -3146,36 +2382,25 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 4,
-				.type = QUIRK_MIDI_FIXED_ENDPOINT,
-				.data = &(const struct snd_usb_midi_endpoint_info) {
+				QUIRK_DATA_MIDI_FIXED_ENDPOINT(4) {
 					.out_cables = 0x0001,
 					.in_cables  = 0x0001
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 {
 	/* Tascam US122 MKII - playback-only support */
 	USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "TASCAM",
 		.product_name = "US122 MKII",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 2,
 					.iface = 1,
@@ -3196,9 +2421,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3206,20 +2429,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 /* Denon DN-X1600 */
 {
 	USB_AUDIO_DEVICE(0x154e, 0x500e),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Denon",
 		.product_name = "DN-X1600",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]){
+		QUIRK_DATA_COMPOSITE{
+			{ QUIRK_DATA_IGNORE(0) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE,
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 1,
@@ -3240,9 +2456,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 2,
@@ -3262,13 +2476,8 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = 4,
-				.type = QUIRK_MIDI_STANDARD_INTERFACE,
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_STANDARD_MIDI(4) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3277,17 +2486,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	USB_DEVICE(0x045e, 0x0283),
 	.bInterfaceClass = USB_CLASS_PER_INTERFACE,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Microsoft",
 		.product_name = "XboxLive Headset/Xbox Communicator",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
 			{
 				/* playback */
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 1,
 					.iface = 0,
@@ -3303,9 +2508,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 			},
 			{
 				/* capture */
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 1,
 					.iface = 1,
@@ -3319,9 +2522,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_max = 16000
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3330,18 +2531,11 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 {
 	USB_DEVICE(0x200c, 0x100b),
 	.bInterfaceClass = USB_CLASS_PER_INTERFACE,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 4,
 					.iface = 1,
@@ -3360,9 +2554,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3375,28 +2567,12 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * enabled in create_standard_audio_quirk().
 	 */
 	USB_DEVICE(0x1686, 0x00dd),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				/* Playback  */
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE,
-			},
-			{
-				/* Capture */
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE,
-			},
-			{
-				/* Midi */
-				.ifnum = 3,
-				.type = QUIRK_MIDI_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			},
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(1) }, /* Playback  */
+			{ QUIRK_DATA_STANDARD_AUDIO(2) }, /* Capture */
+			{ QUIRK_DATA_STANDARD_MIDI(3) }, /* Midi */
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3410,18 +2586,16 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS,
 	.bInterfaceClass = USB_CLASS_AUDIO,
 	.bInterfaceSubClass = USB_SUBCLASS_MIDISTREAMING,
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_MIDI_STANDARD_INTERFACE
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_STANDARD_MIDI(QUIRK_ANY_INTERFACE)
 	}
 },
 
 /* Rane SL-1 */
 {
 	USB_DEVICE(0x13e5, 0x0001),
-	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_AUDIO_STANDARD_INTERFACE
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_STANDARD_AUDIO(QUIRK_ANY_INTERFACE)
         }
 },
 
@@ -3437,24 +2611,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * and only the 48 kHz sample rate works for the playback interface.
 	 */
 	USB_DEVICE(0x0a12, 0x1243),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
-			/* Capture */
-			{
-				.ifnum = 1,
-				.type = QUIRK_IGNORE_INTERFACE,
-			},
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
+			{ QUIRK_DATA_IGNORE(1) }, /* Capture */
 			/* Playback */
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 2,
 					.iface = 2,
@@ -3473,9 +2636,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = -1
-			},
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3488,19 +2649,12 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * even on windows.
 	 */
 	USB_DEVICE(0x19b5, 0x0021),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			/* Playback */
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 2,
 					.iface = 1,
@@ -3519,29 +2673,20 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = -1
-			},
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
 /* MOTU Microbook II */
 {
 	USB_DEVICE_VENDOR_SPEC(0x07fd, 0x0004),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "MOTU",
 		.product_name = "MicroBookII",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3BE,
 					.channels = 6,
 					.iface = 0,
@@ -3562,9 +2707,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3BE,
 					.channels = 8,
 					.iface = 0,
@@ -3585,9 +2728,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3599,14 +2740,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * The feedback for the output is the input.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0023),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 12,
 					.iface = 0,
@@ -3623,9 +2760,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 10,
 					.iface = 0,
@@ -3643,9 +2778,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 44100 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3688,14 +2821,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * but not for DVS (Digital Vinyl Systems) like in Mixxx.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8, // outputs
 					.iface = 0,
@@ -3712,9 +2841,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8, // inputs
 					.iface = 0,
@@ -3732,9 +2859,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 48000 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3745,14 +2870,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * The feedback for the output is the dummy input.
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x000e),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 4,
 					.iface = 0,
@@ -3769,9 +2890,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 2,
 					.iface = 0,
@@ -3789,9 +2908,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 44100 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3802,14 +2919,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * PCM is 6 channels out & 4 channels in @ 44.1 fixed
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x000d),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 6, //Master, Headphones & Booth
 					.iface = 0,
@@ -3826,9 +2939,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 4, //2x RCA inputs (CH1 & CH2)
 					.iface = 0,
@@ -3846,9 +2957,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 44100 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3860,14 +2969,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * The Feedback for the output is the input
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x001e),
-		.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 4,
 					.iface = 0,
@@ -3884,9 +2989,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 6,
 					.iface = 0,
@@ -3904,9 +3007,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 44100 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3917,14 +3018,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * 10 channels playback & 12 channels capture @ 44.1/48/96kHz S24LE
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x000a),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 10,
 					.iface = 0,
@@ -3945,9 +3042,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 12,
 					.iface = 0,
@@ -3969,9 +3064,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -3983,14 +3076,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * The Feedback for the output is the input
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0029),
-		.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 6,
 					.iface = 0,
@@ -4007,9 +3096,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 6,
 					.iface = 0,
@@ -4027,9 +3114,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 44100 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4047,20 +3132,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
  */
 {
 	USB_AUDIO_DEVICE(0x534d, 0x0021),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "MacroSilicon",
 		.product_name = "MS210x",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(2) },
 			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(3) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 2,
 					.iface = 3,
@@ -4075,9 +3153,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_max = 48000,
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4095,20 +3171,13 @@ YAMAHA_DEVICE(0x7010, "UB99"),
  */
 {
 	USB_AUDIO_DEVICE(0x534d, 0x2109),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "MacroSilicon",
 		.product_name = "MS2109",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_MIXER(2) },
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_MIXER,
-			},
-			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(3) {
 					.formats = SNDRV_PCM_FMTBIT_S16_LE,
 					.channels = 2,
 					.iface = 3,
@@ -4123,9 +3192,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_max = 48000,
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4135,14 +3202,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * 8 channels playback & 8 channels capture @ 44.1/48/96kHz S24LE
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x08e4, 0x017f),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 0,
@@ -4161,9 +3224,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 0,
@@ -4183,9 +3244,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 44100, 48000, 96000 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4195,14 +3254,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * 10 channels playback & 12 channels capture @ 48kHz S24LE
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x001b),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 10,
 					.iface = 0,
@@ -4221,9 +3276,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 12,
 					.iface = 0,
@@ -4241,9 +3294,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 48000 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4255,14 +3306,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * Capture on EP 0x86
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x08e4, 0x0163),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 0,
@@ -4282,9 +3329,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 				}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8,
 					.iface = 0,
@@ -4304,9 +3349,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 44100, 48000, 96000 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4317,14 +3360,10 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * and 8 channels in @ 48 fixed (endpoint 0x82).
 	 */
 	USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0013),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8, // outputs
 					.iface = 0,
@@ -4341,9 +3380,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					}
 			},
 			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S24_3LE,
 					.channels = 8, // inputs
 					.iface = 0,
@@ -4361,9 +3398,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.rate_table = (unsigned int[]) { 48000 }
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4374,28 +3409,15 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 */
 	USB_DEVICE(0x1395, 0x0300),
 	.bInterfaceClass = USB_CLASS_PER_INTERFACE,
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
 			// Communication
-			{
-				.ifnum = 3,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+			{ QUIRK_DATA_STANDARD_AUDIO(3) },
 			// Recording
-			{
-				.ifnum = 4,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+			{ QUIRK_DATA_STANDARD_AUDIO(4) },
 			// Main
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
-			{
-				.ifnum = -1
-			}
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4404,21 +3426,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * Fiero SC-01 (firmware v1.0.0 @ 48 kHz)
 	 */
 	USB_DEVICE(0x2b53, 0x0023),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Fiero",
 		.product_name = "SC-01",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
 			/* Playback */
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 2,
 					.fmt_bits = 24,
@@ -4438,9 +3453,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 			},
 			/* Capture */
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 2,
 					.fmt_bits = 24,
@@ -4459,9 +3472,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.clock = 0x29
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4470,21 +3481,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * Fiero SC-01 (firmware v1.0.0 @ 96 kHz)
 	 */
 	USB_DEVICE(0x2b53, 0x0024),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Fiero",
 		.product_name = "SC-01",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
 			/* Playback */
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 2,
 					.fmt_bits = 24,
@@ -4504,9 +3508,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 			},
 			/* Capture */
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 2,
 					.fmt_bits = 24,
@@ -4525,9 +3527,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.clock = 0x29
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4536,21 +3536,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * Fiero SC-01 (firmware v1.1.0)
 	 */
 	USB_DEVICE(0x2b53, 0x0031),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Fiero",
 		.product_name = "SC-01",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = &(const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE
-			},
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_STANDARD_AUDIO(0) },
 			/* Playback */
 			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(1) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 2,
 					.fmt_bits = 24,
@@ -4571,9 +3564,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 			},
 			/* Capture */
 			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_FIXED_ENDPOINT,
-				.data = &(const struct audioformat) {
+				QUIRK_DATA_AUDIOFORMAT(2) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
 					.channels = 2,
 					.fmt_bits = 24,
@@ -4593,9 +3584,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 					.clock = 0x29
 				}
 			},
-			{
-				.ifnum = -1
-			}
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
@@ -4604,27 +3593,14 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	 * For the standard mode, Mythware XA001AU has ID ffad:a001
 	 */
 	USB_DEVICE_VENDOR_SPEC(0xffad, 0xa001),
-	.driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+	QUIRK_DRIVER_INFO {
 		.vendor_name = "Mythware",
 		.product_name = "XA001AU",
-		.ifnum = QUIRK_ANY_INTERFACE,
-		.type = QUIRK_COMPOSITE,
-		.data = (const struct snd_usb_audio_quirk[]) {
-			{
-				.ifnum = 0,
-				.type = QUIRK_IGNORE_INTERFACE,
-			},
-			{
-				.ifnum = 1,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE,
-			},
-			{
-				.ifnum = 2,
-				.type = QUIRK_AUDIO_STANDARD_INTERFACE,
-			},
-			{
-				.ifnum = -1
-			}
+		QUIRK_DATA_COMPOSITE {
+			{ QUIRK_DATA_IGNORE(0) },
+			{ QUIRK_DATA_STANDARD_AUDIO(1) },
+			{ QUIRK_DATA_STANDARD_AUDIO(2) },
+			QUIRK_COMPOSITE_END
 		}
 	}
 },
-- 
2.43.0

[PATCH AUTOSEL 6.10 079/197] ALSA: usb-audio: Add quirk for RME Digiface USB

[Sasha Levin]

From: Cyan Nyan <cyan.vtb@gmail.com>

[ Upstream commit c032044e9672408c534d64a6df2b1ba14449e948 ]

Add trivial support for audio streaming on the RME Digiface USB. Binds
only to the first interface to allow userspace to directly drive the
complex I/O and matrix mixer controls.

Signed-off-by: Cyan Nyan <cyan.vtb@gmail.com>
[Lina: Added 2x/4x sample rate support & boot/format quirks]
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-1-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/quirks-table.h | 171 ++++++++++++++++++++++++++++++++++++++-
 sound/usb/quirks.c       |  58 +++++++++++++
 2 files changed, 228 insertions(+), 1 deletion(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 8d22de8bc2a96..631b9ab80f6cd 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3604,6 +3604,175 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 		}
 	}
 },
-
+{
+	/* Only claim interface 0 */
+	.match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+		       USB_DEVICE_ID_MATCH_PRODUCT |
+		       USB_DEVICE_ID_MATCH_INT_CLASS |
+		       USB_DEVICE_ID_MATCH_INT_NUMBER,
+	.idVendor = 0x2a39,
+	.idProduct = 0x3f8c,
+	.bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+	.bInterfaceNumber = 0,
+	QUIRK_DRIVER_INFO {
+		QUIRK_DATA_COMPOSITE {
+			/*
+			 * Three modes depending on sample rate band,
+			 * with different channel counts for in/out
+			 */
+			{
+				QUIRK_DATA_AUDIOFORMAT(0) {
+					.formats = SNDRV_PCM_FMTBIT_S32_LE,
+					.channels = 34, // outputs
+					.fmt_bits = 24,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x02,
+					.ep_idx = 1,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_32000 |
+						SNDRV_PCM_RATE_44100 |
+						SNDRV_PCM_RATE_48000,
+					.rate_min = 32000,
+					.rate_max = 48000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) {
+						32000, 44100, 48000,
+					},
+					.sync_ep = 0x81,
+					.sync_iface = 0,
+					.sync_altsetting = 1,
+					.sync_ep_idx = 0,
+					.implicit_fb = 1,
+				},
+			},
+			{
+				QUIRK_DATA_AUDIOFORMAT(0) {
+					.formats = SNDRV_PCM_FMTBIT_S32_LE,
+					.channels = 18, // outputs
+					.fmt_bits = 24,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x02,
+					.ep_idx = 1,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_64000 |
+						SNDRV_PCM_RATE_88200 |
+						SNDRV_PCM_RATE_96000,
+					.rate_min = 64000,
+					.rate_max = 96000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) {
+						64000, 88200, 96000,
+					},
+					.sync_ep = 0x81,
+					.sync_iface = 0,
+					.sync_altsetting = 1,
+					.sync_ep_idx = 0,
+					.implicit_fb = 1,
+				},
+			},
+			{
+				QUIRK_DATA_AUDIOFORMAT(0) {
+					.formats = SNDRV_PCM_FMTBIT_S32_LE,
+					.channels = 10, // outputs
+					.fmt_bits = 24,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x02,
+					.ep_idx = 1,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_KNOT |
+						SNDRV_PCM_RATE_176400 |
+						SNDRV_PCM_RATE_192000,
+					.rate_min = 128000,
+					.rate_max = 192000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) {
+						128000, 176400, 192000,
+					},
+					.sync_ep = 0x81,
+					.sync_iface = 0,
+					.sync_altsetting = 1,
+					.sync_ep_idx = 0,
+					.implicit_fb = 1,
+				},
+			},
+			{
+				QUIRK_DATA_AUDIOFORMAT(0) {
+					.formats = SNDRV_PCM_FMTBIT_S32_LE,
+					.channels = 32, // inputs
+					.fmt_bits = 24,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x81,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_32000 |
+						SNDRV_PCM_RATE_44100 |
+						SNDRV_PCM_RATE_48000,
+					.rate_min = 32000,
+					.rate_max = 48000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) {
+						32000, 44100, 48000,
+					}
+				}
+			},
+			{
+				QUIRK_DATA_AUDIOFORMAT(0) {
+					.formats = SNDRV_PCM_FMTBIT_S32_LE,
+					.channels = 16, // inputs
+					.fmt_bits = 24,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x81,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_64000 |
+						SNDRV_PCM_RATE_88200 |
+						SNDRV_PCM_RATE_96000,
+					.rate_min = 64000,
+					.rate_max = 96000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) {
+						64000, 88200, 96000,
+					}
+				}
+			},
+			{
+				QUIRK_DATA_AUDIOFORMAT(0) {
+					.formats = SNDRV_PCM_FMTBIT_S32_LE,
+					.channels = 8, // inputs
+					.fmt_bits = 24,
+					.iface = 0,
+					.altsetting = 1,
+					.altset_idx = 1,
+					.endpoint = 0x81,
+					.ep_attr = USB_ENDPOINT_XFER_ISOC |
+						USB_ENDPOINT_SYNC_ASYNC,
+					.rates = SNDRV_PCM_RATE_KNOT |
+						SNDRV_PCM_RATE_176400 |
+						SNDRV_PCM_RATE_192000,
+					.rate_min = 128000,
+					.rate_max = 192000,
+					.nr_rates = 3,
+					.rate_table = (unsigned int[]) {
+						128000, 176400, 192000,
+					}
+				}
+			},
+			QUIRK_COMPOSITE_END
+		}
+	}
+},
 #undef USB_DEVICE_VENDOR_SPEC
 #undef USB_AUDIO_DEVICE
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index e7b68c67852e9..73da862a012c6 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1389,6 +1389,27 @@ static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
 	return 0;
 }
 
+static int snd_usb_rme_digiface_boot_quirk(struct usb_device *dev)
+{
+	/* Disable mixer, internal clock, all outputs ADAT, 48kHz, TMS off */
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			16, 0x40, 0x2410, 0x7fff, NULL, 0);
+	snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			18, 0x40, 0x0104, 0xffff, NULL, 0);
+
+	/* Disable loopback for all inputs */
+	for (int ch = 0; ch < 32; ch++)
+		snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+				22, 0x40, 0x400, ch, NULL, 0);
+
+	/* Unity gain for all outputs */
+	for (int ch = 0; ch < 34; ch++)
+		snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+				21, 0x40, 0x9000, 0x100 + ch, NULL, 0);
+
+	return 0;
+}
+
 /*
  * Setup quirks
  */
@@ -1616,6 +1637,8 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 		    get_iface_desc(intf->altsetting)->bInterfaceNumber < 3)
 			return snd_usb_motu_microbookii_boot_quirk(dev);
 		break;
+	case USB_ID(0x2a39, 0x3f8c): /* RME Digiface USB */
+		return snd_usb_rme_digiface_boot_quirk(dev);
 	}
 
 	return 0;
@@ -1771,6 +1794,38 @@ static void mbox3_set_format_quirk(struct snd_usb_substream *subs,
 		dev_warn(&subs->dev->dev, "MBOX3: Couldn't set the sample rate");
 }
 
+static const int rme_digiface_rate_table[] = {
+	32000, 44100, 48000, 0,
+	64000, 88200, 96000, 0,
+	128000, 176400, 192000, 0,
+};
+
+static int rme_digiface_set_format_quirk(struct snd_usb_substream *subs)
+{
+	unsigned int cur_rate = subs->data_endpoint->cur_rate;
+	u16 val;
+	int speed_mode;
+	int id;
+
+	for (id = 0; id < ARRAY_SIZE(rme_digiface_rate_table); id++) {
+		if (rme_digiface_rate_table[id] == cur_rate)
+			break;
+	}
+
+	if (id >= ARRAY_SIZE(rme_digiface_rate_table))
+		return -EINVAL;
+
+	/* 2, 3, 4 for 1x, 2x, 4x */
+	speed_mode = (id >> 2) + 2;
+	val = (id << 3) | (speed_mode << 12);
+
+	/* Set the sample rate */
+	snd_usb_ctl_msg(subs->stream->chip->dev,
+		usb_sndctrlpipe(subs->stream->chip->dev, 0),
+		16, 0x40, val, 0x7078, NULL, 0);
+	return 0;
+}
+
 void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 			      const struct audioformat *fmt)
 {
@@ -1795,6 +1850,9 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 	case USB_ID(0x0dba, 0x5000):
 		mbox3_set_format_quirk(subs, fmt); /* Digidesign Mbox 3 */
 		break;
+	case USB_ID(0x2a39, 0x3f8c): /* RME Digiface USB */
+		rme_digiface_set_format_quirk(subs);
+		break;
 	}
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 080/197] ALSA: usb-audio: Add mixer quirk for RME Digiface USB

[Sasha Levin]

From: Asahi Lina <lina@asahilina.net>

[ Upstream commit 611a96f6acf2e74fe28cb90908a9c183862348ce ]

Implement sync, output format, and input status mixer controls, to allow
the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O
interface.

This does not implement the matrix mixer, output gain controls, or input
level meter feedback. The full mixer interface is only really usable
using a dedicated userspace control app (there are too many mixer nodes
for alsamixer to be usable), so for now we leave it up to userspace to
directly control these features using raw USB control messages. This is
similar to how it's done with some FireWire interfaces (ffado-mixer).

Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/mixer_quirks.c | 413 +++++++++++++++++++++++++++++++++++++++
 sound/usb/quirks-table.h |   1 +
 2 files changed, 414 insertions(+)

diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 1d8bf1ecfed44..3727dbd123597 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -14,6 +14,7 @@
  *	    Przemek Rudy (prudy1@o2.pl)
  */
 
+#include <linux/bitfield.h>
 #include <linux/hid.h>
 #include <linux/init.h>
 #include <linux/math64.h>
@@ -2926,6 +2927,415 @@ static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer)
 	return 0;
 }
 
+/*
+ * RME Digiface USB
+ */
+
+#define RME_DIGIFACE_READ_STATUS 17
+#define RME_DIGIFACE_STATUS_REG0L 0
+#define RME_DIGIFACE_STATUS_REG0H 1
+#define RME_DIGIFACE_STATUS_REG1L 2
+#define RME_DIGIFACE_STATUS_REG1H 3
+#define RME_DIGIFACE_STATUS_REG2L 4
+#define RME_DIGIFACE_STATUS_REG2H 5
+#define RME_DIGIFACE_STATUS_REG3L 6
+#define RME_DIGIFACE_STATUS_REG3H 7
+
+#define RME_DIGIFACE_CTL_REG1 16
+#define RME_DIGIFACE_CTL_REG2 18
+
+/* Reg is overloaded, 0-7 for status halfwords or 16 or 18 for control registers */
+#define RME_DIGIFACE_REGISTER(reg, mask) (((reg) << 16) | (mask))
+#define RME_DIGIFACE_INVERT BIT(31)
+
+/* Nonconst helpers */
+#define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1))
+#define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask))
+
+static int snd_rme_digiface_write_reg(struct snd_kcontrol *kcontrol, int item, u16 mask, u16 val)
+{
+	struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+	struct snd_usb_audio *chip = list->mixer->chip;
+	struct usb_device *dev = chip->dev;
+	int err;
+
+	err = snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+			      item,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      val, mask, NULL, 0);
+	if (err < 0)
+		dev_err(&dev->dev,
+			"unable to issue control set request %d (ret = %d)",
+			item, err);
+	return err;
+}
+
+static int snd_rme_digiface_read_status(struct snd_kcontrol *kcontrol, u32 status[4])
+{
+	struct usb_mixer_elem_list *list = snd_kcontrol_chip(kcontrol);
+	struct snd_usb_audio *chip = list->mixer->chip;
+	struct usb_device *dev = chip->dev;
+	__le32 buf[4];
+	int err;
+
+	err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      RME_DIGIFACE_READ_STATUS,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, 0,
+			      buf, sizeof(buf));
+	if (err < 0) {
+		dev_err(&dev->dev,
+			"unable to issue status read request (ret = %d)",
+			err);
+	} else {
+		for (int i = 0; i < ARRAY_SIZE(buf); i++)
+			status[i] = le32_to_cpu(buf[i]);
+	}
+	return err;
+}
+
+static int snd_rme_digiface_get_status_val(struct snd_kcontrol *kcontrol)
+{
+	int err;
+	u32 status[4];
+	bool invert = kcontrol->private_value & RME_DIGIFACE_INVERT;
+	u8 reg = (kcontrol->private_value >> 16) & 0xff;
+	u16 mask = kcontrol->private_value & 0xffff;
+	u16 val;
+
+	err = snd_rme_digiface_read_status(kcontrol, status);
+	if (err < 0)
+		return err;
+
+	switch (reg) {
+	/* Status register halfwords */
+	case RME_DIGIFACE_STATUS_REG0L ... RME_DIGIFACE_STATUS_REG3H:
+		break;
+	case RME_DIGIFACE_CTL_REG1: /* Control register 1, present in halfword 3L */
+		reg = RME_DIGIFACE_STATUS_REG3L;
+		break;
+	case RME_DIGIFACE_CTL_REG2: /* Control register 2, present in halfword 3H */
+		reg = RME_DIGIFACE_STATUS_REG3H;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (reg & 1)
+		val = status[reg >> 1] >> 16;
+	else
+		val = status[reg >> 1] & 0xffff;
+
+	if (invert)
+		val ^= mask;
+
+	return field_get(mask, val);
+}
+
+static int snd_rme_digiface_rate_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	int freq = snd_rme_digiface_get_status_val(kcontrol);
+
+	if (freq < 0)
+		return freq;
+	if (freq >= ARRAY_SIZE(snd_rme_rate_table))
+		return -EIO;
+
+	ucontrol->value.integer.value[0] = snd_rme_rate_table[freq];
+	return 0;
+}
+
+static int snd_rme_digiface_enum_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	int val = snd_rme_digiface_get_status_val(kcontrol);
+
+	if (val < 0)
+		return val;
+
+	ucontrol->value.enumerated.item[0] = val;
+	return 0;
+}
+
+static int snd_rme_digiface_enum_put(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	bool invert = kcontrol->private_value & RME_DIGIFACE_INVERT;
+	u8 reg = (kcontrol->private_value >> 16) & 0xff;
+	u16 mask = kcontrol->private_value & 0xffff;
+	u16 val = field_prep(mask, ucontrol->value.enumerated.item[0]);
+
+	if (invert)
+		val ^= mask;
+
+	return snd_rme_digiface_write_reg(kcontrol, reg, mask, val);
+}
+
+static int snd_rme_digiface_current_sync_get(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	int ret = snd_rme_digiface_enum_get(kcontrol, ucontrol);
+
+	/* 7 means internal for current sync */
+	if (ucontrol->value.enumerated.item[0] == 7)
+		ucontrol->value.enumerated.item[0] = 0;
+
+	return ret;
+}
+
+static int snd_rme_digiface_sync_state_get(struct snd_kcontrol *kcontrol,
+					   struct snd_ctl_elem_value *ucontrol)
+{
+	u32 status[4];
+	int err;
+	bool valid, sync;
+
+	err = snd_rme_digiface_read_status(kcontrol, status);
+	if (err < 0)
+		return err;
+
+	valid = status[0] & BIT(kcontrol->private_value);
+	sync = status[0] & BIT(5 + kcontrol->private_value);
+
+	if (!valid)
+		ucontrol->value.enumerated.item[0] = SND_RME_CLOCK_NOLOCK;
+	else if (!sync)
+		ucontrol->value.enumerated.item[0] = SND_RME_CLOCK_LOCK;
+	else
+		ucontrol->value.enumerated.item[0] = SND_RME_CLOCK_SYNC;
+	return 0;
+}
+
+
+static int snd_rme_digiface_format_info(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_info *uinfo)
+{
+	static const char *const format[] = {
+		"ADAT", "S/PDIF"
+	};
+
+	return snd_ctl_enum_info(uinfo, 1,
+				 ARRAY_SIZE(format), format);
+}
+
+
+static int snd_rme_digiface_sync_source_info(struct snd_kcontrol *kcontrol,
+					     struct snd_ctl_elem_info *uinfo)
+{
+	static const char *const sync_sources[] = {
+		"Internal", "Input 1", "Input 2", "Input 3", "Input 4"
+	};
+
+	return snd_ctl_enum_info(uinfo, 1,
+				 ARRAY_SIZE(sync_sources), sync_sources);
+}
+
+static int snd_rme_digiface_rate_info(struct snd_kcontrol *kcontrol,
+				      struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 200000;
+	uinfo->value.integer.step = 0;
+	return 0;
+}
+
+static const struct snd_kcontrol_new snd_rme_digiface_controls[] = {
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 1 Sync",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_sync_state_info,
+		.get = snd_rme_digiface_sync_state_get,
+		.private_value = 0,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 1 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG0H, BIT(0)) |
+			RME_DIGIFACE_INVERT,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 1 Rate",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_rate_info,
+		.get = snd_rme_digiface_rate_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG1L, GENMASK(3, 0)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 2 Sync",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_sync_state_info,
+		.get = snd_rme_digiface_sync_state_get,
+		.private_value = 1,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 2 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG0L, BIT(13)) |
+			RME_DIGIFACE_INVERT,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 2 Rate",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_rate_info,
+		.get = snd_rme_digiface_rate_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG1L, GENMASK(7, 4)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 3 Sync",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_sync_state_info,
+		.get = snd_rme_digiface_sync_state_get,
+		.private_value = 2,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 3 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG0L, BIT(14)) |
+			RME_DIGIFACE_INVERT,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 3 Rate",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_rate_info,
+		.get = snd_rme_digiface_rate_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG1L, GENMASK(11, 8)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 4 Sync",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_sync_state_info,
+		.get = snd_rme_digiface_sync_state_get,
+		.private_value = 3,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 4 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG0L, GENMASK(15, 12)) |
+			RME_DIGIFACE_INVERT,
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Input 4 Rate",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_rate_info,
+		.get = snd_rme_digiface_rate_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG1L, GENMASK(3, 0)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Output 1 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.put = snd_rme_digiface_enum_put,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_CTL_REG2, BIT(0)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Output 2 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.put = snd_rme_digiface_enum_put,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_CTL_REG2, BIT(1)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Output 3 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.put = snd_rme_digiface_enum_put,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_CTL_REG2, BIT(3)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Output 4 Format",
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_rme_digiface_format_info,
+		.get = snd_rme_digiface_enum_get,
+		.put = snd_rme_digiface_enum_put,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_CTL_REG2, BIT(4)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Sync Source",
+		.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+		.info = snd_rme_digiface_sync_source_info,
+		.get = snd_rme_digiface_enum_get,
+		.put = snd_rme_digiface_enum_put,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_CTL_REG1, GENMASK(2, 0)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Current Sync Source",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_digiface_sync_source_info,
+		.get = snd_rme_digiface_current_sync_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG0L, GENMASK(12, 10)),
+	},
+	{
+		/*
+		 * This is writeable, but it is only set by the PCM rate.
+		 * Mixer apps currently need to drive the mixer using raw USB requests,
+		 * so they can also change this that way to configure the rate for
+		 * stand-alone operation when the PCM is closed.
+		 */
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "System Rate",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_rate_info,
+		.get = snd_rme_digiface_rate_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_CTL_REG1, GENMASK(6, 3)),
+	},
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Current Rate",
+		.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+		.info = snd_rme_rate_info,
+		.get = snd_rme_digiface_rate_get,
+		.private_value = RME_DIGIFACE_REGISTER(RME_DIGIFACE_STATUS_REG1H, GENMASK(7, 4)),
+	}
+};
+
+static int snd_rme_digiface_controls_create(struct usb_mixer_interface *mixer)
+{
+	int err, i;
+
+	for (i = 0; i < ARRAY_SIZE(snd_rme_digiface_controls); ++i) {
+		err = add_single_ctl_with_resume(mixer, 0,
+						 NULL,
+						 &snd_rme_digiface_controls[i],
+						 NULL);
+		if (err < 0)
+			return err;
+	}
+
+	return 0;
+}
+
 /*
  * Pioneer DJ DJM Mixers
  *
@@ -3484,6 +3894,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
 	case USB_ID(0x2a39, 0x3fb0): /* RME Babyface Pro FS */
 		err = snd_bbfpro_controls_create(mixer);
 		break;
+	case USB_ID(0x2a39, 0x3f8c): /* RME Digiface USB */
+		err = snd_rme_digiface_controls_create(mixer);
+		break;
 	case USB_ID(0x2b73, 0x0017): /* Pioneer DJ DJM-250MK2 */
 		err = snd_djm_controls_create(mixer, SND_DJM_250MK2_IDX);
 		break;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 631b9ab80f6cd..24c981c9b2405 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3620,6 +3620,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 			 * Three modes depending on sample rate band,
 			 * with different channel counts for in/out
 			 */
+			{ QUIRK_DATA_STANDARD_MIXER(0) },
 			{
 				QUIRK_DATA_AUDIOFORMAT(0) {
 					.formats = SNDRV_PCM_FMTBIT_S32_LE,
-- 
2.43.0

[PATCH AUTOSEL 6.10 081/197] ALSA: usb-audio: Add logitech Audio profile quirk

[Sasha Levin]

From: Joshua Pius <joshuapius@chromium.org>

[ Upstream commit a51c925c11d7b855167e64b63eb4378e5adfc11d ]

Specify shortnames for the following Logitech Devices: Rally bar, Rally
bar mini, Tap, MeetUp and Huddle.

Signed-off-by: Joshua Pius <joshuapius@chromium.org>
Link: https://patch.msgid.link/20240912152635.1859737-1-joshuapius@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/card.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 778de9244f1e7..9c411b82a218d 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -384,6 +384,12 @@ static const struct usb_audio_device_name usb_audio_names[] = {
 	/* Creative/Toshiba Multimedia Center SB-0500 */
 	DEVICE_NAME(0x041e, 0x3048, "Toshiba", "SB-0500"),
 
+	/* Logitech Audio Devices */
+	DEVICE_NAME(0x046d, 0x0867, "Logitech, Inc.", "Logi-MeetUp"),
+	DEVICE_NAME(0x046d, 0x0874, "Logitech, Inc.", "Logi-Tap-Audio"),
+	DEVICE_NAME(0x046d, 0x087c, "Logitech, Inc.", "Logi-Huddle"),
+	DEVICE_NAME(0x046d, 0x0898, "Logitech, Inc.", "Logi-RB-Audio"),
+	DEVICE_NAME(0x046d, 0x08d2, "Logitech, Inc.", "Logi-RBM-Audio"),
 	DEVICE_NAME(0x046d, 0x0990, "Logitech, Inc.", "QuickCam Pro 9000"),
 
 	DEVICE_NAME(0x05e1, 0x0408, "Syntek", "STK1160"),
-- 
2.43.0

[PATCH AUTOSEL 6.10 082/197] ASoC: codecs: wsa883x: Handle reading version failure

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 2fbf16992e5aa14acf0441320033a01a32309ded ]

If reading version and variant from registers fails (which is unlikely
but possible, because it is a read over bus), the driver will proceed
and perform device configuration based on uninitialized stack variables.
Handle it a bit better - bail out without doing any init and failing the
update status Soundwire callback.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240710-asoc-wsa88xx-version-v1-2-f1c54966ccde@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wsa883x.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/wsa883x.c b/sound/soc/codecs/wsa883x.c
index 2169d93989841..1831d4487ba9d 100644
--- a/sound/soc/codecs/wsa883x.c
+++ b/sound/soc/codecs/wsa883x.c
@@ -998,15 +998,19 @@ static const struct reg_sequence reg_init[] = {
 	{WSA883X_GMAMP_SUP1, 0xE2},
 };
 
-static void wsa883x_init(struct wsa883x_priv *wsa883x)
+static int wsa883x_init(struct wsa883x_priv *wsa883x)
 {
 	struct regmap *regmap = wsa883x->regmap;
-	int variant, version;
+	int variant, version, ret;
 
-	regmap_read(regmap, WSA883X_OTP_REG_0, &variant);
+	ret = regmap_read(regmap, WSA883X_OTP_REG_0, &variant);
+	if (ret)
+		return ret;
 	wsa883x->variant = variant & WSA883X_ID_MASK;
 
-	regmap_read(regmap, WSA883X_CHIP_ID0, &version);
+	ret = regmap_read(regmap, WSA883X_CHIP_ID0, &version);
+	if (ret)
+		return ret;
 	wsa883x->version = version;
 
 	switch (wsa883x->variant) {
@@ -1041,6 +1045,8 @@ static void wsa883x_init(struct wsa883x_priv *wsa883x)
 				   WSA883X_DRE_OFFSET_MASK,
 				   wsa883x->comp_offset);
 	}
+
+	return 0;
 }
 
 static int wsa883x_update_status(struct sdw_slave *slave,
@@ -1049,7 +1055,7 @@ static int wsa883x_update_status(struct sdw_slave *slave,
 	struct wsa883x_priv *wsa883x = dev_get_drvdata(&slave->dev);
 
 	if (status == SDW_SLAVE_ATTACHED && slave->dev_num > 0)
-		wsa883x_init(wsa883x);
+		return wsa883x_init(wsa883x);
 
 	return 0;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 083/197] ALSA: control: Take power_ref lock primarily

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit fcc62b19104a67b9a2941513771e09389b75bd95 ]

The code path for kcontrol accesses have often nested locks of both
card's controls_rwsem and power_ref, and applies in that order.
However, what could take much longer is the latter, power_ref; it
waits for the power state of the device, and it pretty much depends on
the user's action.

This patch swaps the locking order of those locks to a more natural
way, namely, power_ref -> controls_rwsem, in order to shorten the time
of possible nested locks.  For consistency, power_ref is taken always
in the top-level caller side (that is, *_user() functions and the
ioctl handler itself).

Link: https://patch.msgid.link/20240729160659.4516-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/control.c | 54 ++++++++++++++++++++++++++++----------------
 1 file changed, 34 insertions(+), 20 deletions(-)

diff --git a/sound/core/control.c b/sound/core/control.c
index 1dd2337e29300..2151f19b432fd 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -1164,9 +1164,7 @@ static int __snd_ctl_elem_info(struct snd_card *card,
 #ifdef CONFIG_SND_DEBUG
 	info->access = 0;
 #endif
-	result = snd_power_ref_and_wait(card);
-	if (!result)
-		result = kctl->info(kctl, info);
+	result = kctl->info(kctl, info);
 	snd_power_unref(card);
 	if (result >= 0) {
 		snd_BUG_ON(info->access);
@@ -1205,12 +1203,17 @@ static int snd_ctl_elem_info(struct snd_ctl_file *ctl,
 static int snd_ctl_elem_info_user(struct snd_ctl_file *ctl,
 				  struct snd_ctl_elem_info __user *_info)
 {
+	struct snd_card *card = ctl->card;
 	struct snd_ctl_elem_info info;
 	int result;
 
 	if (copy_from_user(&info, _info, sizeof(info)))
 		return -EFAULT;
+	result = snd_power_ref_and_wait(card);
+	if (result)
+		return result;
 	result = snd_ctl_elem_info(ctl, &info);
+	snd_power_unref(card);
 	if (result < 0)
 		return result;
 	/* drop internal access flags */
@@ -1254,10 +1257,7 @@ static int snd_ctl_elem_read(struct snd_card *card,
 
 	if (!snd_ctl_skip_validation(&info))
 		fill_remaining_elem_value(control, &info, pattern);
-	ret = snd_power_ref_and_wait(card);
-	if (!ret)
-		ret = kctl->get(kctl, control);
-	snd_power_unref(card);
+	ret = kctl->get(kctl, control);
 	if (ret < 0)
 		return ret;
 	if (!snd_ctl_skip_validation(&info) &&
@@ -1282,7 +1282,11 @@ static int snd_ctl_elem_read_user(struct snd_card *card,
 	if (IS_ERR(control))
 		return PTR_ERR(no_free_ptr(control));
 
+	result = snd_power_ref_and_wait(card);
+	if (result)
+		return result;
 	result = snd_ctl_elem_read(card, control);
+	snd_power_unref(card);
 	if (result < 0)
 		return result;
 
@@ -1297,7 +1301,7 @@ static int snd_ctl_elem_write(struct snd_card *card, struct snd_ctl_file *file,
 	struct snd_kcontrol *kctl;
 	struct snd_kcontrol_volatile *vd;
 	unsigned int index_offset;
-	int result;
+	int result = 0;
 
 	down_write(&card->controls_rwsem);
 	kctl = snd_ctl_find_id_locked(card, &control->id);
@@ -1315,9 +1319,8 @@ static int snd_ctl_elem_write(struct snd_card *card, struct snd_ctl_file *file,
 	}
 
 	snd_ctl_build_ioff(&control->id, kctl, index_offset);
-	result = snd_power_ref_and_wait(card);
 	/* validate input values */
-	if (IS_ENABLED(CONFIG_SND_CTL_INPUT_VALIDATION) && !result) {
+	if (IS_ENABLED(CONFIG_SND_CTL_INPUT_VALIDATION)) {
 		struct snd_ctl_elem_info info;
 
 		memset(&info, 0, sizeof(info));
@@ -1329,7 +1332,6 @@ static int snd_ctl_elem_write(struct snd_card *card, struct snd_ctl_file *file,
 	}
 	if (!result)
 		result = kctl->put(kctl, control);
-	snd_power_unref(card);
 	if (result < 0) {
 		up_write(&card->controls_rwsem);
 		return result;
@@ -1358,7 +1360,11 @@ static int snd_ctl_elem_write_user(struct snd_ctl_file *file,
 		return PTR_ERR(no_free_ptr(control));
 
 	card = file->card;
+	result = snd_power_ref_and_wait(card);
+	if (result < 0)
+		return result;
 	result = snd_ctl_elem_write(card, file, control);
+	snd_power_unref(card);
 	if (result < 0)
 		return result;
 
@@ -1827,7 +1833,7 @@ static int call_tlv_handler(struct snd_ctl_file *file, int op_flag,
 		{SNDRV_CTL_TLV_OP_CMD,   SNDRV_CTL_ELEM_ACCESS_TLV_COMMAND},
 	};
 	struct snd_kcontrol_volatile *vd = &kctl->vd[snd_ctl_get_ioff(kctl, id)];
-	int i, ret;
+	int i;
 
 	/* Check support of the request for this element. */
 	for (i = 0; i < ARRAY_SIZE(pairs); ++i) {
@@ -1845,11 +1851,7 @@ static int call_tlv_handler(struct snd_ctl_file *file, int op_flag,
 	    vd->owner != NULL && vd->owner != file)
 		return -EPERM;
 
-	ret = snd_power_ref_and_wait(file->card);
-	if (!ret)
-		ret = kctl->tlv.c(kctl, op_flag, size, buf);
-	snd_power_unref(file->card);
-	return ret;
+	return kctl->tlv.c(kctl, op_flag, size, buf);
 }
 
 static int read_tlv_buf(struct snd_kcontrol *kctl, struct snd_ctl_elem_id *id,
@@ -1962,16 +1964,28 @@ static long snd_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg
 	case SNDRV_CTL_IOCTL_SUBSCRIBE_EVENTS:
 		return snd_ctl_subscribe_events(ctl, ip);
 	case SNDRV_CTL_IOCTL_TLV_READ:
-		scoped_guard(rwsem_read, &ctl->card->controls_rwsem)
+		err = snd_power_ref_and_wait(card);
+		if (err < 0)
+			return err;
+		scoped_guard(rwsem_read, &card->controls_rwsem)
 			err = snd_ctl_tlv_ioctl(ctl, argp, SNDRV_CTL_TLV_OP_READ);
+		snd_power_unref(card);
 		return err;
 	case SNDRV_CTL_IOCTL_TLV_WRITE:
-		scoped_guard(rwsem_write, &ctl->card->controls_rwsem)
+		err = snd_power_ref_and_wait(card);
+		if (err < 0)
+			return err;
+		scoped_guard(rwsem_write, &card->controls_rwsem)
 			err = snd_ctl_tlv_ioctl(ctl, argp, SNDRV_CTL_TLV_OP_WRITE);
+		snd_power_unref(card);
 		return err;
 	case SNDRV_CTL_IOCTL_TLV_COMMAND:
-		scoped_guard(rwsem_write, &ctl->card->controls_rwsem)
+		err = snd_power_ref_and_wait(card);
+		if (err < 0)
+			return err;
+		scoped_guard(rwsem_write, &card->controls_rwsem)
 			err = snd_ctl_tlv_ioctl(ctl, argp, SNDRV_CTL_TLV_OP_CMD);
+		snd_power_unref(card);
 		return err;
 	case SNDRV_CTL_IOCTL_POWER:
 		return -ENOPROTOOPT;
-- 
2.43.0

[PATCH AUTOSEL 6.10 084/197] tools/x86/kcpuid: Protect against faulty "max subleaf" values

[Sasha Levin]

From: "Ahmed S. Darwish" <darwi@linutronix.de>

[ Upstream commit cf96ab1a966b87b09fdd9e8cc8357d2d00776a3a ]

Protect against the kcpuid code parsing faulty max subleaf numbers
through a min() expression.  Thus, ensuring that max_subleaf will always
be ≤ MAX_SUBLEAF_NUM.

Use "u32" for the subleaf numbers since kcpuid is compiled with -Wextra,
which includes signed/unsigned comparisons warnings.

Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-5-darwi@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/arch/x86/kcpuid/kcpuid.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/tools/arch/x86/kcpuid/kcpuid.c b/tools/arch/x86/kcpuid/kcpuid.c
index 24b7d017ec2c1..b7965dfff33a9 100644
--- a/tools/arch/x86/kcpuid/kcpuid.c
+++ b/tools/arch/x86/kcpuid/kcpuid.c
@@ -7,7 +7,8 @@
 #include <string.h>
 #include <getopt.h>
 
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#define ARRAY_SIZE(x)	(sizeof(x) / sizeof((x)[0]))
+#define min(a, b)	(((a) < (b)) ? (a) : (b))
 
 typedef unsigned int u32;
 typedef unsigned long long u64;
@@ -207,12 +208,9 @@ static void raw_dump_range(struct cpuid_range *range)
 #define MAX_SUBLEAF_NUM		32
 struct cpuid_range *setup_cpuid_range(u32 input_eax)
 {
-	u32 max_func, idx_func;
-	int subleaf;
+	u32 max_func, idx_func, subleaf, max_subleaf;
+	u32 eax, ebx, ecx, edx, f = input_eax;
 	struct cpuid_range *range;
-	u32 eax, ebx, ecx, edx;
-	u32 f = input_eax;
-	int max_subleaf;
 	bool allzero;
 
 	eax = input_eax;
@@ -258,7 +256,7 @@ struct cpuid_range *setup_cpuid_range(u32 input_eax)
 		 * others have to be tried (0xf)
 		 */
 		if (f == 0x7 || f == 0x14 || f == 0x17 || f == 0x18)
-			max_subleaf = (eax & 0xff) + 1;
+			max_subleaf = min((eax & 0xff) + 1, max_subleaf);
 
 		if (f == 0xb)
 			max_subleaf = 2;
-- 
2.43.0

[PATCH AUTOSEL 6.10 085/197] x86/pkeys: Add PKRU as a parameter in signal handling functions

[Sasha Levin]

From: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>

[ Upstream commit 24cf2bc982ffe02aeffb4a3885c71751a2c7023b ]

Assume there's a multithreaded application that runs untrusted user
code. Each thread has its stack/code protected by a non-zero PKEY, and the
PKRU register is set up such that only that particular non-zero PKEY is
enabled. Each thread also sets up an alternate signal stack to handle
signals, which is protected by PKEY zero. The PKEYs man page documents that
the PKRU will be reset to init_pkru when the signal handler is invoked,
which means that PKEY zero access will be enabled.  But this reset happens
after the kernel attempts to push fpu state to the alternate stack, which
is not (yet) accessible by the kernel, which leads to a new SIGSEGV being
sent to the application, terminating it.

Enabling both the non-zero PKEY (for the thread) and PKEY zero in
userspace will not work for this use case. It cannot have the alt stack
writeable by all - the rationale here is that the code running in that
thread (using a non-zero PKEY) is untrusted and should not have access
to the alternate signal stack (that uses PKEY zero), to prevent the
return address of a function from being changed. The expectation is that
kernel should be able to set up the alternate signal stack and deliver
the signal to the application even if PKEY zero is explicitly disabled
by the application. The signal handler accessibility should not be
dictated by whatever PKRU value the thread sets up.

The PKRU register is managed by XSAVE, which means the sigframe contents
must match the register contents - which is not the case here. It's
required that the signal frame contains the user-defined PKRU value (so
that it is restored correctly from sigcontext) but the actual register must
be reset to init_pkru so that the alt stack is accessible and the signal
can be delivered to the application. It seems that the proper fix here
would be to remove PKRU from the XSAVE framework and manage it separately,
which is quite complicated. As a workaround, do this:

        orig_pkru = rdpkru();
        wrpkru(orig_pkru & init_pkru_value);
        xsave_to_user_sigframe();
        put_user(pkru_sigframe_addr, orig_pkru)

In preparation for writing PKRU to sigframe, pass PKRU as an additional
parameter down the call chain from get_sigframe().

No functional change.

Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240802061318.2140081-2-aruna.ramakrishna@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/fpu/signal.h | 2 +-
 arch/x86/kernel/fpu/signal.c      | 6 +++---
 arch/x86/kernel/signal.c          | 3 ++-
 3 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/fpu/signal.h b/arch/x86/include/asm/fpu/signal.h
index 611fa41711aff..eccc75bc9c4f3 100644
--- a/arch/x86/include/asm/fpu/signal.h
+++ b/arch/x86/include/asm/fpu/signal.h
@@ -29,7 +29,7 @@ fpu__alloc_mathframe(unsigned long sp, int ia32_frame,
 
 unsigned long fpu__get_fpstate_size(void);
 
-extern bool copy_fpstate_to_sigframe(void __user *buf, void __user *fp, int size);
+extern bool copy_fpstate_to_sigframe(void __user *buf, void __user *fp, int size, u32 pkru);
 extern void fpu__clear_user_states(struct fpu *fpu);
 extern bool fpu__restore_sig(void __user *buf, int ia32_frame);
 
diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 247f2225aa9f3..2b3b9e140dd41 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -156,7 +156,7 @@ static inline bool save_xstate_epilog(void __user *buf, int ia32_frame,
 	return !err;
 }
 
-static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
+static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf, u32 pkru)
 {
 	if (use_xsave())
 		return xsave_to_user_sigframe(buf);
@@ -185,7 +185,7 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
  * For [f]xsave state, update the SW reserved fields in the [f]xsave frame
  * indicating the absence/presence of the extended state to the user.
  */
-bool copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
+bool copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size, u32 pkru)
 {
 	struct task_struct *tsk = current;
 	struct fpstate *fpstate = tsk->thread.fpu.fpstate;
@@ -228,7 +228,7 @@ bool copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 		fpregs_restore_userregs();
 
 	pagefault_disable();
-	ret = copy_fpregs_to_sigframe(buf_fx);
+	ret = copy_fpregs_to_sigframe(buf_fx, pkru);
 	pagefault_enable();
 	fpregs_unlock();
 
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 31b6f5dddfc27..1f1e8e0ac5a34 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -84,6 +84,7 @@ get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size,
 	unsigned long math_size = 0;
 	unsigned long sp = regs->sp;
 	unsigned long buf_fx = 0;
+	u32 pkru = read_pkru();
 
 	/* redzone */
 	if (!ia32_frame)
@@ -139,7 +140,7 @@ get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size,
 	}
 
 	/* save i387 and extended state */
-	if (!copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size))
+	if (!copy_fpstate_to_sigframe(*fpstate, (void __user *)buf_fx, math_size, pkru))
 		return (void __user *)-1L;
 
 	return (void __user *)sp;
-- 
2.43.0

[PATCH AUTOSEL 6.10 086/197] x86/pkeys: Restore altstack access in sigreturn()

[Sasha Levin]

From: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>

[ Upstream commit d10b554919d4cc8fa8fe2e95b57ad2624728c8e4 ]

A process can disable access to the alternate signal stack by not
enabling the altstack's PKEY in the PKRU register.

Nevertheless, the kernel updates the PKRU temporarily for signal
handling. However, in sigreturn(), restore_sigcontext() will restore the
PKRU to the user-defined PKRU value.

This will cause restore_altstack() to fail with a SIGSEGV as it needs read
access to the altstack which is prohibited by the user-defined PKRU value.

Fix this by restoring altstack before restoring PKRU.

Signed-off-by: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240802061318.2140081-5-aruna.ramakrishna@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/signal_64.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index 8a94053c54446..ee9453891901b 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -260,13 +260,13 @@ SYSCALL_DEFINE0(rt_sigreturn)
 
 	set_current_blocked(&set);
 
-	if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
+	if (restore_altstack(&frame->uc.uc_stack))
 		goto badframe;
 
-	if (restore_signal_shadow_stack())
+	if (!restore_sigcontext(regs, &frame->uc.uc_mcontext, uc_flags))
 		goto badframe;
 
-	if (restore_altstack(&frame->uc.uc_stack))
+	if (restore_signal_shadow_stack())
 		goto badframe;
 
 	return regs->ax;
-- 
2.43.0

[PATCH AUTOSEL 6.10 087/197] x86/kexec: Add EFI config table identity mapping for kexec kernel

[Sasha Levin]

From: Tao Liu <ltao@redhat.com>

[ Upstream commit 5760929f6545c651682de3c2c6c6786816b17bb1 ]

A kexec kernel boot failure is sometimes observed on AMD CPUs due to an
unmapped EFI config table array.  This can be seen when "nogbpages" is on
the kernel command line, and has been observed as a full BIOS reboot rather
than a successful kexec.

This was also the cause of reported regressions attributed to Commit
7143c5f4cf20 ("x86/mm/ident_map: Use gbpages only where full GB page should
be mapped.") which was subsequently reverted.

To avoid this page fault, explicitly include the EFI config table array in
the kexec identity map.

Further explanation:

The following 2 commits caused the EFI config table array to be
accessed when enabling sev at kernel startup.

    commit ec1c66af3a30 ("x86/compressed/64: Detect/setup SEV/SME features
                          earlier during boot")
    commit c01fce9cef84 ("x86/compressed: Add SEV-SNP feature
                          detection/setup")

This is in the code that examines whether SEV should be enabled or not, so
it can even affect systems that are not SEV capable.

This may result in a page fault if the EFI config table array's address is
unmapped. Since the page fault occurs before the new kernel establishes its
own identity map and page fault routines, it is unrecoverable and kexec
fails.

Most often, this problem is not seen because the EFI config table array
gets included in the map by the luck of being placed at a memory address
close enough to other memory areas that *are* included in the map created
by kexec.

Both the "nogbpages" command line option and the "use gpbages only where
full GB page should be mapped" change greatly reduce the chance of being
included in the map by luck, which is why the problem appears.

Signed-off-by: Tao Liu <ltao@redhat.com>
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Pavin Joseph <me@pavinjoseph.com>
Tested-by: Sarah Brofeldt <srhb@dbc.dk>
Tested-by: Eric Hagberg <ehagberg@gmail.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/all/20240717213121.3064030-2-steve.wahl@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/machine_kexec_64.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index cc0f7f70b17ba..9c9ac606893e9 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -28,6 +28,7 @@
 #include <asm/setup.h>
 #include <asm/set_memory.h>
 #include <asm/cpu.h>
+#include <asm/efi.h>
 
 #ifdef CONFIG_ACPI
 /*
@@ -87,6 +88,8 @@ map_efi_systab(struct x86_mapping_info *info, pgd_t *level4p)
 {
 #ifdef CONFIG_EFI
 	unsigned long mstart, mend;
+	void *kaddr;
+	int ret;
 
 	if (!efi_enabled(EFI_BOOT))
 		return 0;
@@ -102,6 +105,30 @@ map_efi_systab(struct x86_mapping_info *info, pgd_t *level4p)
 	if (!mstart)
 		return 0;
 
+	ret = kernel_ident_mapping_init(info, level4p, mstart, mend);
+	if (ret)
+		return ret;
+
+	kaddr = memremap(mstart, mend - mstart, MEMREMAP_WB);
+	if (!kaddr) {
+		pr_err("Could not map UEFI system table\n");
+		return -ENOMEM;
+	}
+
+	mstart = efi_config_table;
+
+	if (efi_enabled(EFI_64BIT)) {
+		efi_system_table_64_t *stbl = (efi_system_table_64_t *)kaddr;
+
+		mend = mstart + sizeof(efi_config_table_64_t) * stbl->nr_tables;
+	} else {
+		efi_system_table_32_t *stbl = (efi_system_table_32_t *)kaddr;
+
+		mend = mstart + sizeof(efi_config_table_32_t) * stbl->nr_tables;
+	}
+
+	memunmap(kaddr);
+
 	return kernel_ident_mapping_init(info, level4p, mstart, mend);
 #endif
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 6.10 088/197] x86/mm/ident_map: Use gbpages only where full GB page should be mapped.

[Sasha Levin]

From: Steve Wahl <steve.wahl@hpe.com>

[ Upstream commit cc31744a294584a36bf764a0ffa3255a8e69f036 ]

When ident_pud_init() uses only GB pages to create identity maps, large
ranges of addresses not actually requested can be included in the resulting
table; a 4K request will map a full GB.  This can include a lot of extra
address space past that requested, including areas marked reserved by the
BIOS.  That allows processor speculation into reserved regions, that on UV
systems can cause system halts.

Only use GB pages when map creation requests include the full GB page of
space.  Fall back to using smaller 2M pages when only portions of a GB page
are included in the request.

No attempt is made to coalesce mapping requests. If a request requires a
map entry at the 2M (pmd) level, subsequent mapping requests within the
same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full GB page.
Existing usage starts with larger regions and then adds smaller regions, so
this should not have any great consequence.

Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Pavin Joseph <me@pavinjoseph.com>
Tested-by: Sarah Brofeldt <srhb@dbc.dk>
Tested-by: Eric Hagberg <ehagberg@gmail.com>
Link: https://lore.kernel.org/all/20240717213121.3064030-3-steve.wahl@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/ident_map.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/arch/x86/mm/ident_map.c b/arch/x86/mm/ident_map.c
index 968d7005f4a72..a204a332c71fc 100644
--- a/arch/x86/mm/ident_map.c
+++ b/arch/x86/mm/ident_map.c
@@ -26,18 +26,31 @@ static int ident_pud_init(struct x86_mapping_info *info, pud_t *pud_page,
 	for (; addr < end; addr = next) {
 		pud_t *pud = pud_page + pud_index(addr);
 		pmd_t *pmd;
+		bool use_gbpage;
 
 		next = (addr & PUD_MASK) + PUD_SIZE;
 		if (next > end)
 			next = end;
 
-		if (info->direct_gbpages) {
-			pud_t pudval;
+		/* if this is already a gbpage, this portion is already mapped */
+		if (pud_leaf(*pud))
+			continue;
+
+		/* Is using a gbpage allowed? */
+		use_gbpage = info->direct_gbpages;
 
-			if (pud_present(*pud))
-				continue;
+		/* Don't use gbpage if it maps more than the requested region. */
+		/* at the begining: */
+		use_gbpage &= ((addr & ~PUD_MASK) == 0);
+		/* ... or at the end: */
+		use_gbpage &= ((next & ~PUD_MASK) == 0);
+
+		/* Never overwrite existing mappings */
+		use_gbpage &= !pud_present(*pud);
+
+		if (use_gbpage) {
+			pud_t pudval;
 
-			addr &= PUD_MASK;
 			pudval = __pud((addr - info->offset) | info->page_flag);
 			set_pud(pud, pudval);
 			continue;
-- 
2.43.0

[PATCH AUTOSEL 6.10 089/197] ALSA: asihpi: Fix potential OOB array access

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 7b986c7430a6bb68d523dac7bfc74cbd5b44ef96 ]

ASIHPI driver stores some values in the static array upon a response
from the driver, and its index depends on the firmware.  We shouldn't
trust it blindly.

This patch adds a sanity check of the array index to fit in the array
size.

Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/asihpi/hpimsgx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/asihpi/hpimsgx.c b/sound/pci/asihpi/hpimsgx.c
index d0caef2994818..b68e6bfbbfbab 100644
--- a/sound/pci/asihpi/hpimsgx.c
+++ b/sound/pci/asihpi/hpimsgx.c
@@ -708,7 +708,7 @@ static u16 HPIMSGX__init(struct hpi_message *phm,
 		phr->error = HPI_ERROR_PROCESSING_MESSAGE;
 		return phr->error;
 	}
-	if (hr.error == 0) {
+	if (hr.error == 0 && hr.u.s.adapter_index < HPI_MAX_ADAPTERS) {
 		/* the adapter was created successfully
 		   save the mapping for future use */
 		hpi_entry_points[hr.u.s.adapter_index] = entry_point_func;
-- 
2.43.0

[PATCH AUTOSEL 6.10 090/197] ALSA: hdsp: Break infinite MIDI input flush loop

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c01f3815453e2d5f699ccd8c8c1f93a5b8669e59 ]

The current MIDI input flush on HDSP and HDSPM drivers relies on the
hardware reporting the right value.  If the hardware doesn't give the
proper value but returns -1, it may be stuck at an infinite loop.

Add a counter and break if the loop is unexpectedly too long.

Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/rme9652/hdsp.c  | 6 ++++--
 sound/pci/rme9652/hdspm.c | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index e7d1b43471a29..713ca262a0e97 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -1298,8 +1298,10 @@ static int snd_hdsp_midi_output_possible (struct hdsp *hdsp, int id)
 
 static void snd_hdsp_flush_midi_input (struct hdsp *hdsp, int id)
 {
-	while (snd_hdsp_midi_input_available (hdsp, id))
-		snd_hdsp_midi_read_byte (hdsp, id);
+	int count = 256;
+
+	while (snd_hdsp_midi_input_available(hdsp, id) && --count)
+		snd_hdsp_midi_read_byte(hdsp, id);
 }
 
 static int snd_hdsp_midi_output_write (struct hdsp_midi *hmidi)
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 267c7848974ae..74215f57f4fc9 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -1838,8 +1838,10 @@ static inline int snd_hdspm_midi_output_possible (struct hdspm *hdspm, int id)
 
 static void snd_hdspm_flush_midi_input(struct hdspm *hdspm, int id)
 {
-	while (snd_hdspm_midi_input_available (hdspm, id))
-		snd_hdspm_midi_read_byte (hdspm, id);
+	int count = 256;
+
+	while (snd_hdspm_midi_input_available(hdspm, id) && --count)
+		snd_hdspm_midi_read_byte(hdspm, id);
 }
 
 static int snd_hdspm_midi_output_write (struct hdspm_midi *hmidi)
-- 
2.43.0

[PATCH AUTOSEL 6.10 091/197] tools/nolibc: powerpc: limit stack-protector workaround to GCC

[Sasha Levin]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit 1daea158d0aae0770371f3079305a29fdb66829e ]

As mentioned in the comment, the workaround for
__attribute__((no_stack_protector)) is only necessary on GCC.
Avoid applying the workaround on clang, as clang does not recognize
__attribute__((__optimize__)) and would fail.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-3-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/include/nolibc/arch-powerpc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/include/nolibc/arch-powerpc.h b/tools/include/nolibc/arch-powerpc.h
index ac212e6185b26..41ebd394b90c7 100644
--- a/tools/include/nolibc/arch-powerpc.h
+++ b/tools/include/nolibc/arch-powerpc.h
@@ -172,7 +172,7 @@
 	_ret;                                                                \
 })
 
-#ifndef __powerpc64__
+#if !defined(__powerpc64__) && !defined(__clang__)
 /* FIXME: For 32-bit PowerPC, with newer gcc compilers (e.g. gcc 13.1.0),
  * "omit-frame-pointer" fails with __attribute__((no_stack_protector)) but
  * works with __attribute__((__optimize__("-fno-stack-protector")))
-- 
2.43.0

[PATCH AUTOSEL 6.10 092/197] selftests/nolibc: avoid passing NULL to printf("%s")

[Sasha Levin]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit f1a58f61d88642ae1e6e97e9d72d73bc70a93cb8 ]

Clang on higher optimization levels detects that NULL is passed to
printf("%s") and warns about it.
While printf() from nolibc gracefully handles that NULL,
it is undefined behavior as per POSIX, so the warning is reasonable.
Avoid the warning by transforming NULL into a non-NULL placeholder.

Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-8-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/nolibc/nolibc-test.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c
index 994477ee87bef..4bd8360d54225 100644
--- a/tools/testing/selftests/nolibc/nolibc-test.c
+++ b/tools/testing/selftests/nolibc/nolibc-test.c
@@ -534,7 +534,7 @@ int expect_strzr(const char *expr, int llen)
 {
 	int ret = 0;
 
-	llen += printf(" = <%s> ", expr);
+	llen += printf(" = <%s> ", expr ? expr : "(null)");
 	if (expr) {
 		ret = 1;
 		result(llen, FAIL);
@@ -553,7 +553,7 @@ int expect_strnz(const char *expr, int llen)
 {
 	int ret = 0;
 
-	llen += printf(" = <%s> ", expr);
+	llen += printf(" = <%s> ", expr ? expr : "(null)");
 	if (!expr) {
 		ret = 1;
 		result(llen, FAIL);
-- 
2.43.0

[PATCH AUTOSEL 6.10 093/197] ASoC: soc-pcm: Indicate warning if dpcm_playback/capture were used for availability limition

[Sasha Levin]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

[ Upstream commit fd69dfe6789f4ed46d1fdb52e223cff83946d997 ]

I have been wondering why DPCM needs special flag (= dpcm_playback/capture)
to use it. Below is the history why it was added to ASoC.

(A) In beginning, there was no dpcm_xxx flag on ASoC.
    It checks channels_min for DPCM, same as current non-DPCM.
    Let's name it as "validation check" here.

	if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
		if (cpu_dai->driver->playback.channels_min)
			playback = 1;
		if (cpu_dai->driver->capture.channels_min)
			capture = 1;

(B) commit 1e9de42f4324 ("ASoC: dpcm: Explicitly set BE DAI link supported
    stream directions") force to use dpcm_xxx flag on DPCM. According to
    this commit log, this is because "Some BE dummy DAI doesn't set
    channels_min for playback/capture". But we don't know which DAI is it,
    and not know why it can't/don't have channels_min. Let's name it as
    "no_chan_DAI" here. According to the code and git-log, it is used as
    DCPM-BE and is CPU DAI. I think the correct solution was set
    channels_min on "no_chan_DAI" side, not update ASoC framework side. But
    everything is under smoke today.

	if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
		playback = rtd->dai_link->dpcm_playback;
		capture  = rtd->dai_link->dpcm_capture;

(C) commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow playback/capture
    if supported") checks channels_min (= validation check) again. Because
    DPCM availability was handled by dpcm_xxx flag at that time, but some
    Sound Card set it even though it wasn't available. Clearly there's
    a contradiction here. I think correct solution was update Sound Card
    side instead of ASoC framework. Sound Card side will be updated to
    handle this issue later (commit 25612477d20b ("ASoC: soc-dai: set
    dai_link dpcm_ flags with a helper"))

	if (rtd->dai_link->dynamic || rtd->dai_link->no_pcm) {
		...
		playback = rtd->dai_link->dpcm_playback &&
			   snd_soc_dai_stream_valid(cpu_dai, ...);
		capture = rtd->dai_link->dpcm_capture &&
			   snd_soc_dai_stream_valid(cpu_dai, ...);

This (C) patch should have broken "no_chan_DAI" which doesn't have
channels_min, but there was no such report during this 4 years.
Possibilities case are as follows
	- No one is using "no_chan_DAI"
	- "no_chan_DAI" is no longer exist : was removed ?
	- "no_chan_DAI" is no longer exist : has channels_min ?

Because of these history, this dpcm_xxx is unneeded flag today. But because
we have been used it for 10 years since (B), it may have been used
differently. For example some DAI available both playback/capture, but it
set dpcm_playback flag only, in this case dpcm_xxx flag is used as
availability limitation. We can use playback_only flag instead in this
case, but it is very difficult to find such DAI today.

Let's add grace time to remove dpcm_playback/capture flag.

This patch don't use dpcm_xxx flag anymore, and indicates warning to use
xxx_only flag if both playback/capture were available but using only
one of dpcm_xxx flag, and not using xxx_only flag.

Link: https://lore.kernel.org/r/87edaym2cg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/87seuyaahn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/soc.h |  1 +
 sound/soc/soc-pcm.c | 65 ++++++++++++++++++++++++++-------------------
 2 files changed, 38 insertions(+), 28 deletions(-)

diff --git a/include/sound/soc.h b/include/sound/soc.h
index 33671437ee896..2a3da1d913776 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -815,6 +815,7 @@ struct snd_soc_dai_link {
 	/* This DAI link can route to other DAI links at runtime (Frontend)*/
 	unsigned int dynamic:1;
 
+	/* REMOVE ME */
 	/* DPCM capture and Playback support */
 	unsigned int dpcm_capture:1;
 	unsigned int dpcm_playback:1;
diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 711b2f49ed88d..7fe5ee3bcfd4e 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -2795,6 +2795,7 @@ static int soc_get_playback_capture(struct snd_soc_pcm_runtime *rtd,
 {
 	struct snd_soc_dai_link *dai_link = rtd->dai_link;
 	struct snd_soc_dai *cpu_dai;
+	struct snd_soc_dai_link_ch_map *ch_maps;
 	int has_playback = 0;
 	int has_capture  = 0;
 	int i;
@@ -2805,43 +2806,51 @@ static int soc_get_playback_capture(struct snd_soc_pcm_runtime *rtd,
 	}
 
 	if (dai_link->dynamic || dai_link->no_pcm) {
-		int stream;
 
-		if (dai_link->dpcm_playback) {
-			stream = SNDRV_PCM_STREAM_PLAYBACK;
+		for_each_rtd_ch_maps(rtd, i, ch_maps) {
+			cpu_dai	  = snd_soc_rtd_to_cpu(rtd,   ch_maps->cpu);
 
-			for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
-				if (snd_soc_dai_stream_valid(cpu_dai, stream)) {
-					has_playback = 1;
-					break;
-				}
-			}
-			if (!has_playback) {
-				dev_err(rtd->card->dev,
-					"No CPU DAIs support playback for stream %s\n",
-					dai_link->stream_name);
-				return -EINVAL;
-			}
+			if (snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK))
+				has_playback = 1;
+
+			if (snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE))
+				has_capture = 1;
 		}
-		if (dai_link->dpcm_capture) {
-			stream = SNDRV_PCM_STREAM_CAPTURE;
 
-			for_each_rtd_cpu_dais(rtd, i, cpu_dai) {
-				if (snd_soc_dai_stream_valid(cpu_dai, stream)) {
-					has_capture = 1;
-					break;
-				}
+		/*
+		 * REMOVE ME
+		 *
+		 * dpcm_xxx flag will be removed soon, Indicates warning if dpcm_xxx flag was used
+		 * as availability limitation
+		 */
+		if (has_playback && has_capture) {
+			if ( dai_link->dpcm_playback &&
+			    !dai_link->dpcm_capture  &&
+			    !dai_link->playback_only) {
+				dev_warn(rtd->card->dev,
+					 "both playback/capture are available,"
+					 " but not using playback_only flag (%s)\n",
+					 dai_link->stream_name);
+				dev_warn(rtd->card->dev,
+					 "dpcm_playback/capture are no longer needed,"
+					 " please use playback/capture_only instead\n");
+				has_capture = 0;
 			}
 
-			if (!has_capture) {
-				dev_err(rtd->card->dev,
-					"No CPU DAIs support capture for stream %s\n",
-					dai_link->stream_name);
-				return -EINVAL;
+			if (!dai_link->dpcm_playback &&
+			     dai_link->dpcm_capture  &&
+			    !dai_link->capture_only) {
+				dev_warn(rtd->card->dev,
+					 "both playback/capture are available,"
+					 " but not using capture_only flag (%s)\n",
+					 dai_link->stream_name);
+				dev_warn(rtd->card->dev,
+					 "dpcm_playback/capture are no longer needed,"
+					 " please use playback/capture_only instead\n");
+				has_playback = 0;
 			}
 		}
 	} else {
-		struct snd_soc_dai_link_ch_map *ch_maps;
 		struct snd_soc_dai *codec_dai;
 
 		/* Adapt stream for codec2codec links */
-- 
2.43.0

[PATCH AUTOSEL 6.10 094/197] x86/syscall: Avoid memcpy() for ia32 syscall_get_arguments()

[Sasha Levin]

From: Kees Cook <kees@kernel.org>

[ Upstream commit d19d638b1e6cf746263ef60b7d0dee0204d8216a ]

Modern (fortified) memcpy() prefers to avoid writing (or reading) beyond
the end of the addressed destination (or source) struct member:

In function ‘fortify_memcpy_chk’,
    inlined from ‘syscall_get_arguments’ at ./arch/x86/include/asm/syscall.h:85:2,
    inlined from ‘populate_seccomp_data’ at kernel/seccomp.c:258:2,
    inlined from ‘__seccomp_filter’ at kernel/seccomp.c:1231:3:
./include/linux/fortify-string.h:580:25: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
  580 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

As already done for x86_64 and compat mode, do not use memcpy() to
extract syscall arguments from struct pt_regs but rather just perform
direct assignments. Binary output differences are negligible, and actually
ends up using less stack space:

-       sub    $0x84,%esp
+       sub    $0x6c,%esp

and less text size:

   text    data     bss     dec     hex filename
  10794     252       0   11046    2b26 gcc-32b/kernel/seccomp.o.stock
  10714     252       0   10966    2ad6 gcc-32b/kernel/seccomp.o.after

Closes: https://lore.kernel.org/lkml/9b69fb14-df89-4677-9c82-056ea9e706f5@gmail.com/
Reported-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Link: https://lore.kernel.org/all/20240708202202.work.477-kees%40kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/syscall.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h
index 2fc7bc3863ff6..7c488ff0c7641 100644
--- a/arch/x86/include/asm/syscall.h
+++ b/arch/x86/include/asm/syscall.h
@@ -82,7 +82,12 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 struct pt_regs *regs,
 					 unsigned long *args)
 {
-	memcpy(args, &regs->bx, 6 * sizeof(args[0]));
+	args[0] = regs->bx;
+	args[1] = regs->cx;
+	args[2] = regs->dx;
+	args[3] = regs->si;
+	args[4] = regs->di;
+	args[5] = regs->bp;
 }
 
 static inline int syscall_get_arch(struct task_struct *task)
-- 
2.43.0

[PATCH AUTOSEL 6.10 095/197] ASoC: Intel: boards: always check the result of acpi_dev_get_first_match_dev()

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 14e91ddd5c02d8c3e5a682ebfa0546352b459911 ]

The code seems mostly copy-pasted, with some machine drivers
forgetting to test if the 'adev' result is NULL.

Add this check when missing, and use -ENOENT consistently as an error
code.

Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/alsa-devel/918944d2-3d00-465e-a9d1-5d57fc966113@stanley.mountain/T/#u
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240827123215.258859-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/boards/bytcht_cx2072x.c | 4 ++++
 sound/soc/intel/boards/bytcht_da7213.c  | 4 ++++
 sound/soc/intel/boards/bytcht_es8316.c  | 2 +-
 sound/soc/intel/boards/bytcr_rt5640.c   | 2 +-
 sound/soc/intel/boards/bytcr_rt5651.c   | 2 +-
 sound/soc/intel/boards/cht_bsw_rt5645.c | 4 ++++
 sound/soc/intel/boards/cht_bsw_rt5672.c | 4 ++++
 sound/soc/intel/boards/sof_es8336.c     | 2 +-
 sound/soc/intel/boards/sof_wm8804.c     | 4 ++++
 9 files changed, 24 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/boards/bytcht_cx2072x.c b/sound/soc/intel/boards/bytcht_cx2072x.c
index df3c2a7b64d23..8c2b4ab764bba 100644
--- a/sound/soc/intel/boards/bytcht_cx2072x.c
+++ b/sound/soc/intel/boards/bytcht_cx2072x.c
@@ -255,7 +255,11 @@ static int snd_byt_cht_cx2072x_probe(struct platform_device *pdev)
 		snprintf(codec_name, sizeof(codec_name), "i2c-%s",
 			 acpi_dev_name(adev));
 		byt_cht_cx2072x_dais[dai_index].codecs->name = codec_name;
+	} else {
+		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
+		return -ENOENT;
 	}
+
 	acpi_dev_put(adev);
 
 	/* override platform name, if required */
diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c
index 08c598b7e1eee..9178bbe8d9950 100644
--- a/sound/soc/intel/boards/bytcht_da7213.c
+++ b/sound/soc/intel/boards/bytcht_da7213.c
@@ -258,7 +258,11 @@ static int bytcht_da7213_probe(struct platform_device *pdev)
 		snprintf(codec_name, sizeof(codec_name),
 			 "i2c-%s", acpi_dev_name(adev));
 		dailink[dai_index].codecs->name = codec_name;
+	} else {
+		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
+		return -ENOENT;
 	}
+
 	acpi_dev_put(adev);
 
 	/* override platform name, if required */
diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c
index 77b91ea4dc32c..3539c9ff0fd2c 100644
--- a/sound/soc/intel/boards/bytcht_es8316.c
+++ b/sound/soc/intel/boards/bytcht_es8316.c
@@ -562,7 +562,7 @@ static int snd_byt_cht_es8316_mc_probe(struct platform_device *pdev)
 		byt_cht_es8316_dais[dai_index].codecs->name = codec_name;
 	} else {
 		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
-		return -ENXIO;
+		return -ENOENT;
 	}
 
 	codec_dev = acpi_get_first_physical_node(adev);
diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index db4a33680d948..4479825c08b5e 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -1693,7 +1693,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 		byt_rt5640_dais[dai_index].codecs->name = byt_rt5640_codec_name;
 	} else {
 		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
-		return -ENXIO;
+		return -ENOENT;
 	}
 
 	codec_dev = acpi_get_first_physical_node(adev);
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 8514b79f389bb..1f54da98aacf4 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -926,7 +926,7 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		byt_rt5651_dais[dai_index].codecs->name = byt_rt5651_codec_name;
 	} else {
 		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
-		return -ENXIO;
+		return -ENOENT;
 	}
 
 	codec_dev = acpi_get_first_physical_node(adev);
diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c
index 1da9ceee4d593..ac23a8b7cafca 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -582,7 +582,11 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
 		snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name),
 			 "i2c-%s", acpi_dev_name(adev));
 		cht_dailink[dai_index].codecs->name = cht_rt5645_codec_name;
+	} else {
+		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
+		return -ENOENT;
 	}
+
 	/* acpi_get_first_physical_node() returns a borrowed ref, no need to deref */
 	codec_dev = acpi_get_first_physical_node(adev);
 	acpi_dev_put(adev);
diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c
index d68e5bc755dee..c6c469d51243e 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5672.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5672.c
@@ -479,7 +479,11 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
 		snprintf(drv->codec_name, sizeof(drv->codec_name),
 			 "i2c-%s", acpi_dev_name(adev));
 		cht_dailink[dai_index].codecs->name = drv->codec_name;
+	}  else {
+		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
+		return -ENOENT;
 	}
+
 	acpi_dev_put(adev);
 
 	/* Use SSP0 on Bay Trail CR devices */
diff --git a/sound/soc/intel/boards/sof_es8336.c b/sound/soc/intel/boards/sof_es8336.c
index c1fcc156a5752..809532238c44f 100644
--- a/sound/soc/intel/boards/sof_es8336.c
+++ b/sound/soc/intel/boards/sof_es8336.c
@@ -681,7 +681,7 @@ static int sof_es8336_probe(struct platform_device *pdev)
 			dai_links[0].codecs->dai_name = "ES8326 HiFi";
 	} else {
 		dev_err(dev, "Error cannot find '%s' dev\n", mach->id);
-		return -ENXIO;
+		return -ENOENT;
 	}
 
 	codec_dev = acpi_get_first_physical_node(adev);
diff --git a/sound/soc/intel/boards/sof_wm8804.c b/sound/soc/intel/boards/sof_wm8804.c
index 4cb0d463bf404..9c5b3f8f09f36 100644
--- a/sound/soc/intel/boards/sof_wm8804.c
+++ b/sound/soc/intel/boards/sof_wm8804.c
@@ -270,7 +270,11 @@ static int sof_wm8804_probe(struct platform_device *pdev)
 		snprintf(codec_name, sizeof(codec_name),
 			 "%s%s", "i2c-", acpi_dev_name(adev));
 		dailink[dai_index].codecs->name = codec_name;
+	} else {
+		dev_err(&pdev->dev, "Error cannot find '%s' dev\n", mach->id);
+		return -ENOENT;
 	}
+
 	acpi_dev_put(adev);
 
 	snd_soc_card_set_drvdata(card, ctx);
-- 
2.43.0

[PATCH AUTOSEL 6.10 096/197] rcu-tasks: Fix access non-existent percpu rtpcp variable in rcu_tasks_need_gpcb()

[Sasha Levin]

From: Zqiang <qiang.zhang1211@gmail.com>

[ Upstream commit fd70e9f1d85f5323096ad313ba73f5fe3d15ea41 ]

For kernels built with CONFIG_FORCE_NR_CPUS=y, the nr_cpu_ids is
defined as NR_CPUS instead of the number of possible cpus, this
will cause the following system panic:

smpboot: Allowing 4 CPUs, 0 hotplug CPUs
...
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:512 nr_node_ids:1
...
BUG: unable to handle page fault for address: ffffffff9911c8c8
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 15 Comm: rcu_tasks_trace Tainted: G W
6.6.21 #1 5dc7acf91a5e8e9ac9dcfc35bee0245691283ea6
RIP: 0010:rcu_tasks_need_gpcb+0x25d/0x2c0
RSP: 0018:ffffa371c00a3e60 EFLAGS: 00010082
CR2: ffffffff9911c8c8 CR3: 000000040fa20005 CR4: 00000000001706f0
Call Trace:
<TASK>
? __die+0x23/0x80
? page_fault_oops+0xa4/0x180
? exc_page_fault+0x152/0x180
? asm_exc_page_fault+0x26/0x40
? rcu_tasks_need_gpcb+0x25d/0x2c0
? __pfx_rcu_tasks_kthread+0x40/0x40
rcu_tasks_one_gp+0x69/0x180
rcu_tasks_kthread+0x94/0xc0
kthread+0xe8/0x140
? __pfx_kthread+0x40/0x40
ret_from_fork+0x34/0x80
? __pfx_kthread+0x40/0x40
ret_from_fork_asm+0x1b/0x80
</TASK>

Considering that there may be holes in the CPU numbers, use the
maximum possible cpu number, instead of nr_cpu_ids, for configuring
enqueue and dequeue limits.

[ neeraj.upadhyay: Fix htmldocs build error reported by Stephen Rothwell ]

Closes: https://lore.kernel.org/linux-input/CALMA0xaTSMN+p4xUXkzrtR5r6k7hgoswcaXx7baR_z9r5jjskw@mail.gmail.com/T/#u
Reported-by: Zhixu Liu <zhixu.liu@gmail.com>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/tasks.h | 82 ++++++++++++++++++++++++++++++----------------
 1 file changed, 53 insertions(+), 29 deletions(-)

diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index ba3440a45b6dd..bc8429ada7a51 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -34,6 +34,7 @@ typedef void (*postgp_func_t)(struct rcu_tasks *rtp);
  * @rtp_blkd_tasks: List of tasks blocked as readers.
  * @rtp_exit_list: List of tasks in the latter portion of do_exit().
  * @cpu: CPU number corresponding to this entry.
+ * @index: Index of this CPU in rtpcp_array of the rcu_tasks structure.
  * @rtpp: Pointer to the rcu_tasks structure.
  */
 struct rcu_tasks_percpu {
@@ -49,6 +50,7 @@ struct rcu_tasks_percpu {
 	struct list_head rtp_blkd_tasks;
 	struct list_head rtp_exit_list;
 	int cpu;
+	int index;
 	struct rcu_tasks *rtpp;
 };
 
@@ -76,6 +78,7 @@ struct rcu_tasks_percpu {
  * @call_func: This flavor's call_rcu()-equivalent function.
  * @wait_state: Task state for synchronous grace-period waits (default TASK_UNINTERRUPTIBLE).
  * @rtpcpu: This flavor's rcu_tasks_percpu structure.
+ * @rtpcp_array: Array of pointers to rcu_tasks_percpu structure of CPUs in cpu_possible_mask.
  * @percpu_enqueue_shift: Shift down CPU ID this much when enqueuing callbacks.
  * @percpu_enqueue_lim: Number of per-CPU callback queues in use for enqueuing.
  * @percpu_dequeue_lim: Number of per-CPU callback queues in use for dequeuing.
@@ -110,6 +113,7 @@ struct rcu_tasks {
 	call_rcu_func_t call_func;
 	unsigned int wait_state;
 	struct rcu_tasks_percpu __percpu *rtpcpu;
+	struct rcu_tasks_percpu **rtpcp_array;
 	int percpu_enqueue_shift;
 	int percpu_enqueue_lim;
 	int percpu_dequeue_lim;
@@ -182,6 +186,8 @@ module_param(rcu_task_collapse_lim, int, 0444);
 static int rcu_task_lazy_lim __read_mostly = 32;
 module_param(rcu_task_lazy_lim, int, 0444);
 
+static int rcu_task_cpu_ids;
+
 /* RCU tasks grace-period state for debugging. */
 #define RTGS_INIT		 0
 #define RTGS_WAIT_WAIT_CBS	 1
@@ -245,6 +251,8 @@ static void cblist_init_generic(struct rcu_tasks *rtp)
 	int cpu;
 	int lim;
 	int shift;
+	int maxcpu;
+	int index = 0;
 
 	if (rcu_task_enqueue_lim < 0) {
 		rcu_task_enqueue_lim = 1;
@@ -254,14 +262,9 @@ static void cblist_init_generic(struct rcu_tasks *rtp)
 	}
 	lim = rcu_task_enqueue_lim;
 
-	if (lim > nr_cpu_ids)
-		lim = nr_cpu_ids;
-	shift = ilog2(nr_cpu_ids / lim);
-	if (((nr_cpu_ids - 1) >> shift) >= lim)
-		shift++;
-	WRITE_ONCE(rtp->percpu_enqueue_shift, shift);
-	WRITE_ONCE(rtp->percpu_dequeue_lim, lim);
-	smp_store_release(&rtp->percpu_enqueue_lim, lim);
+	rtp->rtpcp_array = kcalloc(num_possible_cpus(), sizeof(struct rcu_tasks_percpu *), GFP_KERNEL);
+	BUG_ON(!rtp->rtpcp_array);
+
 	for_each_possible_cpu(cpu) {
 		struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu);
 
@@ -273,14 +276,29 @@ static void cblist_init_generic(struct rcu_tasks *rtp)
 		INIT_WORK(&rtpcp->rtp_work, rcu_tasks_invoke_cbs_wq);
 		rtpcp->cpu = cpu;
 		rtpcp->rtpp = rtp;
+		rtpcp->index = index;
+		rtp->rtpcp_array[index] = rtpcp;
+		index++;
 		if (!rtpcp->rtp_blkd_tasks.next)
 			INIT_LIST_HEAD(&rtpcp->rtp_blkd_tasks);
 		if (!rtpcp->rtp_exit_list.next)
 			INIT_LIST_HEAD(&rtpcp->rtp_exit_list);
+		maxcpu = cpu;
 	}
 
-	pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d.\n", rtp->name,
-			data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), rcu_task_cb_adjust);
+	rcu_task_cpu_ids = maxcpu + 1;
+	if (lim > rcu_task_cpu_ids)
+		lim = rcu_task_cpu_ids;
+	shift = ilog2(rcu_task_cpu_ids / lim);
+	if (((rcu_task_cpu_ids - 1) >> shift) >= lim)
+		shift++;
+	WRITE_ONCE(rtp->percpu_enqueue_shift, shift);
+	WRITE_ONCE(rtp->percpu_dequeue_lim, lim);
+	smp_store_release(&rtp->percpu_enqueue_lim, lim);
+
+	pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d rcu_task_cpu_ids=%d.\n",
+			rtp->name, data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim),
+			rcu_task_cb_adjust, rcu_task_cpu_ids);
 }
 
 // Compute wakeup time for lazy callback timer.
@@ -348,7 +366,7 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func,
 			rtpcp->rtp_n_lock_retries = 0;
 		}
 		if (rcu_task_cb_adjust && ++rtpcp->rtp_n_lock_retries > rcu_task_contend_lim &&
-		    READ_ONCE(rtp->percpu_enqueue_lim) != nr_cpu_ids)
+		    READ_ONCE(rtp->percpu_enqueue_lim) != rcu_task_cpu_ids)
 			needadjust = true;  // Defer adjustment to avoid deadlock.
 	}
 	// Queuing callbacks before initialization not yet supported.
@@ -368,10 +386,10 @@ static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func,
 	raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags);
 	if (unlikely(needadjust)) {
 		raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags);
-		if (rtp->percpu_enqueue_lim != nr_cpu_ids) {
+		if (rtp->percpu_enqueue_lim != rcu_task_cpu_ids) {
 			WRITE_ONCE(rtp->percpu_enqueue_shift, 0);
-			WRITE_ONCE(rtp->percpu_dequeue_lim, nr_cpu_ids);
-			smp_store_release(&rtp->percpu_enqueue_lim, nr_cpu_ids);
+			WRITE_ONCE(rtp->percpu_dequeue_lim, rcu_task_cpu_ids);
+			smp_store_release(&rtp->percpu_enqueue_lim, rcu_task_cpu_ids);
 			pr_info("Switching %s to per-CPU callback queuing.\n", rtp->name);
 		}
 		raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags);
@@ -444,6 +462,8 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp)
 
 	dequeue_limit = smp_load_acquire(&rtp->percpu_dequeue_lim);
 	for (cpu = 0; cpu < dequeue_limit; cpu++) {
+		if (!cpu_possible(cpu))
+			continue;
 		struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu);
 
 		/* Advance and accelerate any new callbacks. */
@@ -481,7 +501,7 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp)
 	if (rcu_task_cb_adjust && ncbs <= rcu_task_collapse_lim) {
 		raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags);
 		if (rtp->percpu_enqueue_lim > 1) {
-			WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(nr_cpu_ids));
+			WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(rcu_task_cpu_ids));
 			smp_store_release(&rtp->percpu_enqueue_lim, 1);
 			rtp->percpu_dequeue_gpseq = get_state_synchronize_rcu();
 			gpdone = false;
@@ -496,7 +516,9 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp)
 			pr_info("Completing switch %s to CPU-0 callback queuing.\n", rtp->name);
 		}
 		if (rtp->percpu_dequeue_lim == 1) {
-			for (cpu = rtp->percpu_dequeue_lim; cpu < nr_cpu_ids; cpu++) {
+			for (cpu = rtp->percpu_dequeue_lim; cpu < rcu_task_cpu_ids; cpu++) {
+				if (!cpu_possible(cpu))
+					continue;
 				struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu);
 
 				WARN_ON_ONCE(rcu_segcblist_n_cbs(&rtpcp->cblist));
@@ -511,30 +533,32 @@ static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp)
 // Advance callbacks and invoke any that are ready.
 static void rcu_tasks_invoke_cbs(struct rcu_tasks *rtp, struct rcu_tasks_percpu *rtpcp)
 {
-	int cpu;
-	int cpunext;
 	int cpuwq;
 	unsigned long flags;
 	int len;
+	int index;
 	struct rcu_head *rhp;
 	struct rcu_cblist rcl = RCU_CBLIST_INITIALIZER(rcl);
 	struct rcu_tasks_percpu *rtpcp_next;
 
-	cpu = rtpcp->cpu;
-	cpunext = cpu * 2 + 1;
-	if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) {
-		rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext);
-		cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND;
-		queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work);
-		cpunext++;
-		if (cpunext < smp_load_acquire(&rtp->percpu_dequeue_lim)) {
-			rtpcp_next = per_cpu_ptr(rtp->rtpcpu, cpunext);
-			cpuwq = rcu_cpu_beenfullyonline(cpunext) ? cpunext : WORK_CPU_UNBOUND;
+	index = rtpcp->index * 2 + 1;
+	if (index < num_possible_cpus()) {
+		rtpcp_next = rtp->rtpcp_array[index];
+		if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) {
+			cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND;
 			queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work);
+			index++;
+			if (index < num_possible_cpus()) {
+				rtpcp_next = rtp->rtpcp_array[index];
+				if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) {
+					cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND;
+					queue_work_on(cpuwq, system_wq, &rtpcp_next->rtp_work);
+				}
+			}
 		}
 	}
 
-	if (rcu_segcblist_empty(&rtpcp->cblist) || !cpu_possible(cpu))
+	if (rcu_segcblist_empty(&rtpcp->cblist))
 		return;
 	raw_spin_lock_irqsave_rcu_node(rtpcp, flags);
 	rcu_segcblist_advance(&rtpcp->cblist, rcu_seq_current(&rtp->tasks_gp_seq));
-- 
2.43.0

[PATCH AUTOSEL 6.10 097/197] hwmon: (nct6775) add G15CF to ASUS WMI monitoring list

[Sasha Levin]

From: Denis Pauk <pauk.denis@gmail.com>

[ Upstream commit 1f432e4cf1dd3ecfec5ed80051b4611632a0fd51 ]

Boards G15CF has got a nct6775 chip, but by default there's no use of it
because of resource conflict with WMI method.

Add the board to the WMI monitoring list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Attila <attila@fulop.one>
Message-ID: <20240812152652.1303-1-pauk.denis@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/nct6775-platform.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/nct6775-platform.c b/drivers/hwmon/nct6775-platform.c
index 9aa4dcf4a6f33..096f1daa8f2bc 100644
--- a/drivers/hwmon/nct6775-platform.c
+++ b/drivers/hwmon/nct6775-platform.c
@@ -1269,6 +1269,7 @@ static const char * const asus_msi_boards[] = {
 	"EX-B760M-V5 D4",
 	"EX-H510M-V3",
 	"EX-H610M-V3 D4",
+	"G15CF",
 	"PRIME A620M-A",
 	"PRIME B560-PLUS",
 	"PRIME B560-PLUS AC-HES",
-- 
2.43.0

[PATCH AUTOSEL 6.10 098/197] fbdev: efifb: Register sysfs groups through driver core

[Sasha Levin]

From: Thomas Weißschuh <linux@weissschuh.net>

[ Upstream commit 95cdd538e0e5677efbdf8aade04ec098ab98f457 ]

The driver core can register and cleanup sysfs groups already.
Make use of that functionality to simplify the error handling and
cleanup.

Also avoid a UAF race during unregistering where the sysctl attributes
were usable after the info struct was freed.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/efifb.c | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/video/fbdev/efifb.c b/drivers/video/fbdev/efifb.c
index 8dd82afb3452b..595b8e27bea66 100644
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -561,15 +561,10 @@ static int efifb_probe(struct platform_device *dev)
 		break;
 	}
 
-	err = sysfs_create_groups(&dev->dev.kobj, efifb_groups);
-	if (err) {
-		pr_err("efifb: cannot add sysfs attrs\n");
-		goto err_unmap;
-	}
 	err = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (err < 0) {
 		pr_err("efifb: cannot allocate colormap\n");
-		goto err_groups;
+		goto err_unmap;
 	}
 
 	err = devm_aperture_acquire_for_platform_device(dev, par->base, par->size);
@@ -587,8 +582,6 @@ static int efifb_probe(struct platform_device *dev)
 
 err_fb_dealloc_cmap:
 	fb_dealloc_cmap(&info->cmap);
-err_groups:
-	sysfs_remove_groups(&dev->dev.kobj, efifb_groups);
 err_unmap:
 	if (mem_flags & (EFI_MEMORY_UC | EFI_MEMORY_WC))
 		iounmap(info->screen_base);
@@ -608,12 +601,12 @@ static void efifb_remove(struct platform_device *pdev)
 
 	/* efifb_destroy takes care of info cleanup */
 	unregister_framebuffer(info);
-	sysfs_remove_groups(&pdev->dev.kobj, efifb_groups);
 }
 
 static struct platform_driver efifb_driver = {
 	.driver = {
 		.name = "efi-framebuffer",
+		.dev_groups = efifb_groups,
 	},
 	.probe = efifb_probe,
 	.remove_new = efifb_remove,
-- 
2.43.0

[PATCH AUTOSEL 6.10 099/197] fbdev: pxafb: Fix possible use after free in pxafb_task()

[Sasha Levin]

From: Kaixin Wang <kxwang23@m.fudan.edu.cn>

[ Upstream commit 4a6921095eb04a900e0000da83d9475eb958e61e ]

In the pxafb_probe function, it calls the pxafb_init_fbinfo function,
after which &fbi->task is associated with pxafb_task. Moreover,
within this pxafb_init_fbinfo function, the pxafb_blank function
within the &pxafb_ops struct is capable of scheduling work.

If we remove the module which will call pxafb_remove to make cleanup,
it will call unregister_framebuffer function which can call
do_unregister_framebuffer to free fbi->fb through
put_fb_info(fb_info), while the work mentioned above will be used.
The sequence of operations that may lead to a UAF bug is as follows:

CPU0                                                CPU1

                                   | pxafb_task
pxafb_remove                       |
unregister_framebuffer(info)       |
do_unregister_framebuffer(fb_info) |
put_fb_info(fb_info)               |
// free fbi->fb                    | set_ctrlr_state(fbi, state)
                                   | __pxafb_lcd_power(fbi, 0)
                                   | fbi->lcd_power(on, &fbi->fb.var)
                                   | //use fbi->fb

Fix it by ensuring that the work is canceled before proceeding
with the cleanup in pxafb_remove.

Note that only root user can remove the driver at runtime.

Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/pxafb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index 2ef56fa28aff3..5ce02495cda63 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -2403,6 +2403,7 @@ static void pxafb_remove(struct platform_device *dev)
 	info = &fbi->fb;
 
 	pxafb_overlay_exit(fbi);
+	cancel_work_sync(&fbi->task);
 	unregister_framebuffer(info);
 
 	pxafb_disable_controller(fbi);
-- 
2.43.0

[PATCH AUTOSEL 6.10 100/197] pmdomain: core: Don't hold the genpd-lock when calling dev_pm_domain_set()

[Sasha Levin]

From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit b87eee38605c396f0e1fa435939960e5c6cd41d6 ]

There is no need to hold the genpd-lock, while assigning the
dev->pm_domain. In fact, it becomes a problem on a PREEMPT_RT based
configuration as the genpd-lock may be a raw spinlock, while the lock
acquired through the call to dev_pm_domain_set() is a regular spinlock.

To fix the problem, let's simply move the calls to dev_pm_domain_set()
outside the genpd-lock.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Raghavendra Kakarla <quic_rkakarla@quicinc.com>  # qcm6490 with PREEMPT_RT set
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20240527142557.321610-3-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pmdomain/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pmdomain/core.c b/drivers/pmdomain/core.c
index 623d15b68707e..c45819debde96 100644
--- a/drivers/pmdomain/core.c
+++ b/drivers/pmdomain/core.c
@@ -1694,7 +1694,6 @@ static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
 	genpd_lock(genpd);
 
 	genpd_set_cpumask(genpd, gpd_data->cpu);
-	dev_pm_domain_set(dev, &genpd->domain);
 
 	genpd->device_count++;
 	if (gd)
@@ -1703,6 +1702,7 @@ static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
 	list_add_tail(&gpd_data->base.list_node, &genpd->dev_list);
 
 	genpd_unlock(genpd);
+	dev_pm_domain_set(dev, &genpd->domain);
  out:
 	if (ret)
 		genpd_free_dev_data(dev, gpd_data);
@@ -1759,12 +1759,13 @@ static int genpd_remove_device(struct generic_pm_domain *genpd,
 		genpd->gd->max_off_time_changed = true;
 
 	genpd_clear_cpumask(genpd, gpd_data->cpu);
-	dev_pm_domain_set(dev, NULL);
 
 	list_del_init(&pdd->list_node);
 
 	genpd_unlock(genpd);
 
+	dev_pm_domain_set(dev, NULL);
+
 	if (genpd->detach_dev)
 		genpd->detach_dev(genpd, dev);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 101/197] coredump: Standartize and fix logging

[Sasha Levin]

From: Roman Kisel <romank@linux.microsoft.com>

[ Upstream commit c114e9948c2b6a0b400266e59cc656b59e795bca ]

The coredump code does not log the process ID and the comm
consistently, logs unescaped comm when it does log it, and
does not always use the ratelimited logging. That makes it
harder to analyze logs and puts the system at the risk of
spamming the system log incase something crashes many times
over and over again.

Fix that by logging TGID and comm (escaped) consistently and
using the ratelimited logging always.

Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240718182743.1959160-2-romank@linux.microsoft.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/coredump.c            | 43 +++++++++++++++-------------------------
 include/linux/coredump.h | 22 ++++++++++++++++++++
 2 files changed, 38 insertions(+), 27 deletions(-)

diff --git a/fs/coredump.c b/fs/coredump.c
index a57a06b80f571..19d3343b93c6b 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -586,8 +586,7 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		struct subprocess_info *sub_info;
 
 		if (ispipe < 0) {
-			printk(KERN_WARNING "format_corename failed\n");
-			printk(KERN_WARNING "Aborting core\n");
+			coredump_report_failure("format_corename failed, aborting core");
 			goto fail_unlock;
 		}
 
@@ -607,27 +606,21 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 			 * right pid if a thread in a multi-threaded
 			 * core_pattern process dies.
 			 */
-			printk(KERN_WARNING
-				"Process %d(%s) has RLIMIT_CORE set to 1\n",
-				task_tgid_vnr(current), current->comm);
-			printk(KERN_WARNING "Aborting core\n");
+			coredump_report_failure("RLIMIT_CORE is set to 1, aborting core");
 			goto fail_unlock;
 		}
 		cprm.limit = RLIM_INFINITY;
 
 		dump_count = atomic_inc_return(&core_dump_count);
 		if (core_pipe_limit && (core_pipe_limit < dump_count)) {
-			printk(KERN_WARNING "Pid %d(%s) over core_pipe_limit\n",
-			       task_tgid_vnr(current), current->comm);
-			printk(KERN_WARNING "Skipping core dump\n");
+			coredump_report_failure("over core_pipe_limit, skipping core dump");
 			goto fail_dropcount;
 		}
 
 		helper_argv = kmalloc_array(argc + 1, sizeof(*helper_argv),
 					    GFP_KERNEL);
 		if (!helper_argv) {
-			printk(KERN_WARNING "%s failed to allocate memory\n",
-			       __func__);
+			coredump_report_failure("%s failed to allocate memory", __func__);
 			goto fail_dropcount;
 		}
 		for (argi = 0; argi < argc; argi++)
@@ -644,8 +637,7 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 
 		kfree(helper_argv);
 		if (retval) {
-			printk(KERN_INFO "Core dump to |%s pipe failed\n",
-			       cn.corename);
+			coredump_report_failure("|%s pipe failed", cn.corename);
 			goto close_fail;
 		}
 	} else {
@@ -658,10 +650,8 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 			goto fail_unlock;
 
 		if (need_suid_safe && cn.corename[0] != '/') {
-			printk(KERN_WARNING "Pid %d(%s) can only dump core "\
-				"to fully qualified path!\n",
-				task_tgid_vnr(current), current->comm);
-			printk(KERN_WARNING "Skipping core dump\n");
+			coredump_report_failure(
+				"this process can only dump core to a fully qualified path, skipping core dump");
 			goto fail_unlock;
 		}
 
@@ -730,13 +720,13 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		idmap = file_mnt_idmap(cprm.file);
 		if (!vfsuid_eq_kuid(i_uid_into_vfsuid(idmap, inode),
 				    current_fsuid())) {
-			pr_info_ratelimited("Core dump to %s aborted: cannot preserve file owner\n",
-					    cn.corename);
+			coredump_report_failure("Core dump to %s aborted: "
+				"cannot preserve file owner", cn.corename);
 			goto close_fail;
 		}
 		if ((inode->i_mode & 0677) != 0600) {
-			pr_info_ratelimited("Core dump to %s aborted: cannot preserve file permissions\n",
-					    cn.corename);
+			coredump_report_failure("Core dump to %s aborted: "
+				"cannot preserve file permissions", cn.corename);
 			goto close_fail;
 		}
 		if (!(cprm.file->f_mode & FMODE_CAN_WRITE))
@@ -757,7 +747,7 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		 * have this set to NULL.
 		 */
 		if (!cprm.file) {
-			pr_info("Core dump to |%s disabled\n", cn.corename);
+			coredump_report_failure("Core dump to |%s disabled", cn.corename);
 			goto close_fail;
 		}
 		if (!dump_vma_snapshot(&cprm))
@@ -983,11 +973,10 @@ void validate_coredump_safety(void)
 {
 	if (suid_dumpable == SUID_DUMP_ROOT &&
 	    core_pattern[0] != '/' && core_pattern[0] != '|') {
-		pr_warn(
-"Unsafe core_pattern used with fs.suid_dumpable=2.\n"
-"Pipe handler or fully qualified core dump path required.\n"
-"Set kernel.core_pattern before fs.suid_dumpable.\n"
-		);
+
+		coredump_report_failure("Unsafe core_pattern used with fs.suid_dumpable=2: "
+			"pipe handler or fully qualified core dump path required. "
+			"Set kernel.core_pattern before fs.suid_dumpable.");
 	}
 }
 
diff --git a/include/linux/coredump.h b/include/linux/coredump.h
index 0904ba010341a..45e598fe34766 100644
--- a/include/linux/coredump.h
+++ b/include/linux/coredump.h
@@ -43,8 +43,30 @@ extern int dump_align(struct coredump_params *cprm, int align);
 int dump_user_range(struct coredump_params *cprm, unsigned long start,
 		    unsigned long len);
 extern void do_coredump(const kernel_siginfo_t *siginfo);
+
+/*
+ * Logging for the coredump code, ratelimited.
+ * The TGID and comm fields are added to the message.
+ */
+
+#define __COREDUMP_PRINTK(Level, Format, ...) \
+	do {	\
+		char comm[TASK_COMM_LEN];	\
+	\
+		get_task_comm(comm, current);	\
+		printk_ratelimited(Level "coredump: %d(%*pE): " Format "\n",	\
+			task_tgid_vnr(current), (int)strlen(comm), comm, ##__VA_ARGS__);	\
+	} while (0)	\
+
+#define coredump_report(fmt, ...) __COREDUMP_PRINTK(KERN_INFO, fmt, ##__VA_ARGS__)
+#define coredump_report_failure(fmt, ...) __COREDUMP_PRINTK(KERN_WARNING, fmt, ##__VA_ARGS__)
+
 #else
 static inline void do_coredump(const kernel_siginfo_t *siginfo) {}
+
+#define coredump_report(...)
+#define coredump_report_failure(...)
+
 #endif
 
 #if defined(CONFIG_COREDUMP) && defined(CONFIG_SYSCTL)
-- 
2.43.0

[PATCH AUTOSEL 6.10 102/197] rcuscale: Provide clear error when async specified without primitives

[Sasha Levin]

From: "Paul E. McKenney" <paulmck@kernel.org>

[ Upstream commit 11377947b5861fa59bf77c827e1dd7c081842cc9 ]

Currently, if the rcuscale module's async module parameter is specified
for RCU implementations that do not have async primitives such as RCU
Tasks Rude (which now lacks a call_rcu_tasks_rude() function), there
will be a series of splats due to calls to a NULL pointer.  This commit
therefore warns of this situation, but switches to non-async testing.

Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/rcu/rcuscale.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/rcu/rcuscale.c b/kernel/rcu/rcuscale.c
index 8db4fedaaa1eb..a5806baa1a2a8 100644
--- a/kernel/rcu/rcuscale.c
+++ b/kernel/rcu/rcuscale.c
@@ -498,7 +498,7 @@ rcu_scale_writer(void *arg)
 			schedule_timeout_idle(torture_random(&tr) % writer_holdoff_jiffies + 1);
 		wdp = &wdpp[i];
 		*wdp = ktime_get_mono_fast_ns();
-		if (gp_async) {
+		if (gp_async && !WARN_ON_ONCE(!cur_ops->async)) {
 retry:
 			if (!rhp)
 				rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
@@ -554,7 +554,7 @@ rcu_scale_writer(void *arg)
 			i++;
 		rcu_scale_wait_shutdown();
 	} while (!torture_must_stop());
-	if (gp_async) {
+	if (gp_async && cur_ops->async) {
 		cur_ops->gp_barrier();
 	}
 	writer_n_durations[me] = i_max + 1;
-- 
2.43.0

[PATCH AUTOSEL 6.10 103/197] iommu/arm-smmu-qcom: hide last LPASS SMMU context bank from linux

[Sasha Levin]

From: Marc Gonzalez <mgonzalez@freebox.fr>

[ Upstream commit 3a8990b8a778219327c5f8ecf10b5d81377b925a ]

On qcom msm8998, writing to the last context bank of lpass_q6_smmu
(base address 0x05100000) produces a system freeze & reboot.

The hardware/hypervisor reports 13 context banks for the LPASS SMMU
on msm8998, but only the first 12 are accessible...
Override the number of context banks

[    2.546101] arm-smmu 5100000.iommu: probing hardware configuration...
[    2.552439] arm-smmu 5100000.iommu: SMMUv2 with:
[    2.558945] arm-smmu 5100000.iommu: 	stage 1 translation
[    2.563627] arm-smmu 5100000.iommu: 	address translation ops
[    2.568923] arm-smmu 5100000.iommu: 	non-coherent table walk
[    2.574566] arm-smmu 5100000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[    2.580220] arm-smmu 5100000.iommu: 	stream matching with 12 register groups
[    2.587263] arm-smmu 5100000.iommu: 	13 context banks (0 stage-2 only)
[    2.614447] arm-smmu 5100000.iommu: 	Supported page sizes: 0x63315000
[    2.621358] arm-smmu 5100000.iommu: 	Stage-1: 36-bit VA -> 36-bit IPA
[    2.627772] arm-smmu 5100000.iommu: 	preserved 0 boot mappings

Specifically, the crashes occur here:

	qsmmu->bypass_cbndx = smmu->num_context_banks - 1;
	arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0);

and here:

	arm_smmu_write_context_bank(smmu, i);
	arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_FSR, ARM_SMMU_CB_FSR_FAULT);

It is likely that FW reserves the last context bank for its own use,
thus a simple work-around is: DON'T USE IT in Linux.

If we decrease the number of context banks, last one will be "hidden".

Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240820-smmu-v3-1-2f71483b00ec@freebox.fr
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 13f3e2efb2ccb..8bc71449aabc3 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -282,6 +282,13 @@ static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu)
 	u32 smr;
 	int i;
 
+	/*
+	 * MSM8998 LPASS SMMU reports 13 context banks, but accessing
+	 * the last context bank crashes the system.
+	 */
+	if (of_device_is_compatible(smmu->dev->of_node, "qcom,msm8998-smmu-v2") && smmu->num_context_banks == 13)
+		smmu->num_context_banks = 12;
+
 	/*
 	 * Some platforms support more than the Arm SMMU architected maximum of
 	 * 128 stream matching groups. For unknown reasons, the additional
-- 
2.43.0

[PATCH AUTOSEL 6.10 104/197] iommu/arm-smmu-qcom: Work around SDM845 Adreno SMMU w/ 16K pages

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 2d42d3ba443706c9164fa0bef4e5fd1c36bc1bd9 ]

SDM845's Adreno SMMU is unique in that it actually advertizes support
for 16K (and 32M) pages, which doesn't hold for newer SoCs.

This however, seems either broken in the hardware implementation, the
hypervisor middleware that abstracts the SMMU, or there's a bug in the
Linux kernel somewhere down the line that nobody managed to track down.

Booting SDM845 with 16K page sizes and drm/msm results in:

*** gpu fault: ttbr0=0000000000000000 iova=000100000000c000 dir=READ
type=TRANSLATION source=CP (0,0,0,0)

right after loading the firmware. The GPU then starts spitting out
illegal intstruction errors, as it's quite obvious that it got a
bogus pointer.

Moreover, it seems like this issue also concerns other implementations
of SMMUv2 on Qualcomm SoCs, such as the one on SC7180.

Hide 16K support on such instances to work around this.

Reported-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240824-topic-845_gpu_smmu-v2-1-a302b8acc052@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index 8bc71449aabc3..eff090b1f4fc7 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -345,6 +345,14 @@ static int qcom_smmu_cfg_probe(struct arm_smmu_device *smmu)
 	return 0;
 }
 
+static int qcom_adreno_smmuv2_cfg_probe(struct arm_smmu_device *smmu)
+{
+	/* Support for 16K pages is advertised on some SoCs, but it doesn't seem to work */
+	smmu->features &= ~ARM_SMMU_FEAT_FMT_AARCH64_16K;
+
+	return 0;
+}
+
 static void qcom_smmu_write_s2cr(struct arm_smmu_device *smmu, int idx)
 {
 	struct arm_smmu_s2cr *s2cr = smmu->s2crs + idx;
@@ -443,6 +451,7 @@ static const struct arm_smmu_impl sdm845_smmu_500_impl = {
 
 static const struct arm_smmu_impl qcom_adreno_smmu_v2_impl = {
 	.init_context = qcom_adreno_smmu_init_context,
+	.cfg_probe = qcom_adreno_smmuv2_cfg_probe,
 	.def_domain_type = qcom_smmu_def_domain_type,
 	.alloc_context_bank = qcom_adreno_smmu_alloc_context_bank,
 	.write_sctlr = qcom_adreno_smmu_write_sctlr,
-- 
2.43.0

[PATCH AUTOSEL 6.10 105/197] power: reset: brcmstb: Do not go into infinite loop if reset fails

[Sasha Levin]

From: Andrew Davis <afd@ti.com>

[ Upstream commit cf8c39b00e982fa506b16f9d76657838c09150cb ]

There may be other backup reset methods available, do not halt
here so that other reset methods can be tried.

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/reset/brcmstb-reboot.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/power/reset/brcmstb-reboot.c b/drivers/power/reset/brcmstb-reboot.c
index 0f2944dc93551..a04713f191a11 100644
--- a/drivers/power/reset/brcmstb-reboot.c
+++ b/drivers/power/reset/brcmstb-reboot.c
@@ -62,9 +62,6 @@ static int brcmstb_restart_handler(struct notifier_block *this,
 		return NOTIFY_DONE;
 	}
 
-	while (1)
-		;
-
 	return NOTIFY_DONE;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 106/197] iommu/arm-smmu-v3: Match Stall behaviour for S2

[Sasha Levin]

From: Mostafa Saleh <smostafa@google.com>

[ Upstream commit ce7cb08e22e09f43649b025c849a3ae3b80833c4 ]

According to the spec (ARM IHI 0070 F.b), in
"5.5 Fault configuration (A, R, S bits)":
    A STE with stage 2 translation enabled and STE.S2S == 0 is
    considered ILLEGAL if SMMU_IDR0.STALL_MODEL == 0b10.

Also described in the pseudocode “SteIllegal()”
    if STE.Config == '11x' then
        [..]
        if eff_idr0_stall_model == '10' && STE.S2S == '0' then
            // stall_model forcing stall, but S2S == 0
            return TRUE;

Which means, S2S must be set when stall model is
"ARM_SMMU_FEAT_STALL_FORCE", but currently the driver ignores that.

Although, the driver can do the minimum and only set S2S for
“ARM_SMMU_FEAT_STALL_FORCE”, it is more consistent to match S1
behaviour, which also sets it for “ARM_SMMU_FEAT_STALL” if the
master has requested stalls.

Also, since S2 stalls are enabled now, report them to the IOMMU layer
and for VFIO devices it will fail anyway as VFIO doesn’t register an
iopf handler.

Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20240830110349.797399-2-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 8 +++-----
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 1 +
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index f456bcf1890ba..1f38669b711d3 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -1000,7 +1000,8 @@ void arm_smmu_get_ste_used(const __le64 *ent, __le64 *used_bits)
 		used_bits[2] |=
 			cpu_to_le64(STRTAB_STE_2_S2VMID | STRTAB_STE_2_VTCR |
 				    STRTAB_STE_2_S2AA64 | STRTAB_STE_2_S2ENDI |
-				    STRTAB_STE_2_S2PTW | STRTAB_STE_2_S2R);
+				    STRTAB_STE_2_S2PTW | STRTAB_STE_2_S2S |
+				    STRTAB_STE_2_S2R);
 		used_bits[3] |= cpu_to_le64(STRTAB_STE_3_S2TTB_MASK);
 	}
 
@@ -1629,6 +1630,7 @@ void arm_smmu_make_s2_domain_ste(struct arm_smmu_ste *target,
 		STRTAB_STE_2_S2ENDI |
 #endif
 		STRTAB_STE_2_S2PTW |
+		(master->stall_enabled ? STRTAB_STE_2_S2S : 0) |
 		STRTAB_STE_2_S2R);
 
 	target->data[3] = cpu_to_le64(pgtbl_cfg->arm_lpae_s2_cfg.vttbr &
@@ -1722,10 +1724,6 @@ static int arm_smmu_handle_evt(struct arm_smmu_device *smmu, u64 *evt)
 		return -EOPNOTSUPP;
 	}
 
-	/* Stage-2 is always pinned at the moment */
-	if (evt[1] & EVTQ_1_S2)
-		return -EFAULT;
-
 	if (!(evt[1] & EVTQ_1_STALL))
 		return -EOPNOTSUPP;
 
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index 1242a086c9f94..d9c2f763eaba4 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -264,6 +264,7 @@ struct arm_smmu_ste {
 #define STRTAB_STE_2_S2AA64		(1UL << 51)
 #define STRTAB_STE_2_S2ENDI		(1UL << 52)
 #define STRTAB_STE_2_S2PTW		(1UL << 54)
+#define STRTAB_STE_2_S2S		(1UL << 57)
 #define STRTAB_STE_2_S2R		(1UL << 58)
 
 #define STRTAB_STE_3_S2TTB_MASK		GENMASK_ULL(51, 4)
-- 
2.43.0

[PATCH AUTOSEL 6.10 107/197] iommu/vt-d: Always reserve a domain ID for identity setup

[Sasha Levin]

From: Lu Baolu <baolu.lu@linux.intel.com>

[ Upstream commit 2c13012e09190174614fd6901857a1b8c199e17d ]

We will use a global static identity domain. Reserve a static domain ID
for it.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240809055431.36513-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel/iommu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index e9bea0305c268..eed67326976d3 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -1462,10 +1462,10 @@ static int iommu_init_domains(struct intel_iommu *iommu)
 	 * entry for first-level or pass-through translation modes should
 	 * be programmed with a domain id different from those used for
 	 * second-level or nested translation. We reserve a domain id for
-	 * this purpose.
+	 * this purpose. This domain id is also used for identity domain
+	 * in legacy mode.
 	 */
-	if (sm_supported(iommu))
-		set_bit(FLPT_DEFAULT_DID, iommu->domain_ids);
+	set_bit(FLPT_DEFAULT_DID, iommu->domain_ids);
 
 	return 0;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 108/197] iommu/vt-d: Fix potential lockup if qi_submit_sync called with 0 count

[Sasha Levin]

From: Sanjay K Kumar <sanjay.k.kumar@intel.com>

[ Upstream commit 3cf74230c139f208b7fb313ae0054386eee31a81 ]

If qi_submit_sync() is invoked with 0 invalidation descriptors (for
instance, for DMA draining purposes), we can run into a bug where a
submitting thread fails to detect the completion of invalidation_wait.
Subsequently, this led to a soft lockup. Currently, there is no impact
by this bug on the existing users because no callers are submitting
invalidations with 0 descriptors. This fix will enable future users
(such as DMA drain) calling qi_submit_sync() with 0 count.

Suppose thread T1 invokes qi_submit_sync() with non-zero descriptors, while
concurrently, thread T2 calls qi_submit_sync() with zero descriptors. Both
threads then enter a while loop, waiting for their respective descriptors
to complete. T1 detects its completion (i.e., T1's invalidation_wait status
changes to QI_DONE by HW) and proceeds to call reclaim_free_desc() to
reclaim all descriptors, potentially including adjacent ones of other
threads that are also marked as QI_DONE.

During this time, while T2 is waiting to acquire the qi->q_lock, the IOMMU
hardware may complete the invalidation for T2, setting its status to
QI_DONE. However, if T1's execution of reclaim_free_desc() frees T2's
invalidation_wait descriptor and changes its status to QI_FREE, T2 will
not observe the QI_DONE status for its invalidation_wait and will
indefinitely remain stuck.

This soft lockup does not occur when only non-zero descriptors are
submitted.In such cases, invalidation descriptors are interspersed among
wait descriptors with the status QI_IN_USE, acting as barriers. These
barriers prevent the reclaim code from mistakenly freeing descriptors
belonging to other submitters.

Considered the following example timeline:
	T1			T2
========================================
	ID1
	WD1
	while(WD1!=QI_DONE)
	unlock
				lock
	WD1=QI_DONE*		WD2
				while(WD2!=QI_DONE)
				unlock
	lock
	WD1==QI_DONE?
	ID1=QI_DONE		WD2=DONE*
	reclaim()
	ID1=FREE
	WD1=FREE
	WD2=FREE
	unlock
				soft lockup! T2 never sees QI_DONE in WD2

Where:
ID = invalidation descriptor
WD = wait descriptor
* Written by hardware

The root of the problem is that the descriptor status QI_DONE flag is used
for two conflicting purposes:
1. signal a descriptor is ready for reclaim (to be freed)
2. signal by the hardware that a wait descriptor is complete

The solution (in this patch) is state separation by using QI_FREE flag
for #1.

Once a thread's invalidation descriptors are complete, their status would
be set to QI_FREE. The reclaim_free_desc() function would then only
free descriptors marked as QI_FREE instead of those marked as
QI_DONE. This change ensures that T2 (from the previous example) will
correctly observe the completion of its invalidation_wait (marked as
QI_DONE).

Signed-off-by: Sanjay K Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240728210059.1964602-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel/dmar.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/intel/dmar.c b/drivers/iommu/intel/dmar.c
index 1c8d3141cb55c..01e157d89a163 100644
--- a/drivers/iommu/intel/dmar.c
+++ b/drivers/iommu/intel/dmar.c
@@ -1204,9 +1204,7 @@ static void free_iommu(struct intel_iommu *iommu)
  */
 static inline void reclaim_free_desc(struct q_inval *qi)
 {
-	while (qi->desc_status[qi->free_tail] == QI_DONE ||
-	       qi->desc_status[qi->free_tail] == QI_ABORT) {
-		qi->desc_status[qi->free_tail] = QI_FREE;
+	while (qi->desc_status[qi->free_tail] == QI_FREE && qi->free_tail != qi->free_head) {
 		qi->free_tail = (qi->free_tail + 1) % QI_LENGTH;
 		qi->free_cnt++;
 	}
@@ -1463,8 +1461,16 @@ int qi_submit_sync(struct intel_iommu *iommu, struct qi_desc *desc,
 		raw_spin_lock(&qi->q_lock);
 	}
 
-	for (i = 0; i < count; i++)
-		qi->desc_status[(index + i) % QI_LENGTH] = QI_DONE;
+	/*
+	 * The reclaim code can free descriptors from multiple submissions
+	 * starting from the tail of the queue. When count == 0, the
+	 * status of the standalone wait descriptor at the tail of the queue
+	 * must be set to QI_FREE to allow the reclaim code to proceed.
+	 * It is also possible that descriptors from one of the previous
+	 * submissions has to be reclaimed by a subsequent submission.
+	 */
+	for (i = 0; i <= count; i++)
+		qi->desc_status[(index + i) % QI_LENGTH] = QI_FREE;
 
 	reclaim_free_desc(qi);
 	raw_spin_unlock_irqrestore(&qi->q_lock, flags);
-- 
2.43.0

[PATCH AUTOSEL 6.10 109/197] iommu/vt-d: Unconditionally flush device TLB for pasid table updates

[Sasha Levin]

From: Lu Baolu <baolu.lu@linux.intel.com>

[ Upstream commit 1f5e307ca16c0c19186cbd56ac460a687e6daba0 ]

The caching mode of an IOMMU is irrelevant to the behavior of the device
TLB. Previously, commit <304b3bde24b5> ("iommu/vt-d: Remove caching mode
check before device TLB flush") removed this redundant check in the
domain unmap path.

Checking the caching mode before flushing the device TLB after a pasid
table entry is updated is unnecessary and can lead to inconsistent
behavior.

Extends this consistency by removing the caching mode check in the pasid
table update path.

Suggested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240820030208.20020-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/intel/pasid.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c
index aabcdf7565817..57dd3530f68d4 100644
--- a/drivers/iommu/intel/pasid.c
+++ b/drivers/iommu/intel/pasid.c
@@ -261,9 +261,7 @@ void intel_pasid_tear_down_entry(struct intel_iommu *iommu, struct device *dev,
 	else
 		iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH);
 
-	/* Device IOTLB doesn't need to be flushed in caching mode. */
-	if (!cap_caching_mode(iommu->cap))
-		devtlb_invalidation_with_pasid(iommu, dev, pasid);
+	devtlb_invalidation_with_pasid(iommu, dev, pasid);
 }
 
 /*
@@ -490,9 +488,7 @@ int intel_pasid_setup_dirty_tracking(struct intel_iommu *iommu,
 
 	iommu->flush.flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH);
 
-	/* Device IOTLB doesn't need to be flushed in caching mode. */
-	if (!cap_caching_mode(iommu->cap))
-		devtlb_invalidation_with_pasid(iommu, dev, pasid);
+	devtlb_invalidation_with_pasid(iommu, dev, pasid);
 
 	return 0;
 }
@@ -569,9 +565,7 @@ void intel_pasid_setup_page_snoop_control(struct intel_iommu *iommu,
 	pasid_cache_invalidation_with_pasid(iommu, did, pasid);
 	qi_flush_piotlb(iommu, did, pasid, 0, -1, 0);
 
-	/* Device IOTLB doesn't need to be flushed in caching mode. */
-	if (!cap_caching_mode(iommu->cap))
-		devtlb_invalidation_with_pasid(iommu, dev, pasid);
+	devtlb_invalidation_with_pasid(iommu, dev, pasid);
 }
 
 /**
-- 
2.43.0

[PATCH AUTOSEL 6.10 110/197] iommu/arm-smmu-v3: Do not use devm for the cd table allocations

[Sasha Levin]

From: Jason Gunthorpe <jgg@nvidia.com>

[ Upstream commit 47b2de35cab2b683f69d03515c2658c2d8515323 ]

The master->cd_table is entirely contained within the struct
arm_smmu_master which is guaranteed to be freed by the core code under
arm_smmu_release_device().

There is no reason to use devm here, arm_smmu_free_cd_tables() is reliably
called to free the CD related memory. Remove it and save some memory.

Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/5-v4-6416877274e1+1af-smmuv3_tidy_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 29 +++++++++------------
 1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 1f38669b711d3..a5425519fecb8 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -1173,8 +1173,8 @@ static int arm_smmu_alloc_cd_leaf_table(struct arm_smmu_device *smmu,
 {
 	size_t size = CTXDESC_L2_ENTRIES * (CTXDESC_CD_DWORDS << 3);
 
-	l1_desc->l2ptr = dmam_alloc_coherent(smmu->dev, size,
-					     &l1_desc->l2ptr_dma, GFP_KERNEL);
+	l1_desc->l2ptr = dma_alloc_coherent(smmu->dev, size,
+					    &l1_desc->l2ptr_dma, GFP_KERNEL);
 	if (!l1_desc->l2ptr) {
 		dev_warn(smmu->dev,
 			 "failed to allocate context descriptor table\n");
@@ -1373,17 +1373,17 @@ static int arm_smmu_alloc_cd_tables(struct arm_smmu_master *master)
 		cd_table->num_l1_ents = DIV_ROUND_UP(max_contexts,
 						  CTXDESC_L2_ENTRIES);
 
-		cd_table->l1_desc = devm_kcalloc(smmu->dev, cd_table->num_l1_ents,
-					      sizeof(*cd_table->l1_desc),
-					      GFP_KERNEL);
+		cd_table->l1_desc = kcalloc(cd_table->num_l1_ents,
+					    sizeof(*cd_table->l1_desc),
+					    GFP_KERNEL);
 		if (!cd_table->l1_desc)
 			return -ENOMEM;
 
 		l1size = cd_table->num_l1_ents * (CTXDESC_L1_DESC_DWORDS << 3);
 	}
 
-	cd_table->cdtab = dmam_alloc_coherent(smmu->dev, l1size, &cd_table->cdtab_dma,
-					   GFP_KERNEL);
+	cd_table->cdtab = dma_alloc_coherent(smmu->dev, l1size,
+					     &cd_table->cdtab_dma, GFP_KERNEL);
 	if (!cd_table->cdtab) {
 		dev_warn(smmu->dev, "failed to allocate context descriptor\n");
 		ret = -ENOMEM;
@@ -1394,7 +1394,7 @@ static int arm_smmu_alloc_cd_tables(struct arm_smmu_master *master)
 
 err_free_l1:
 	if (cd_table->l1_desc) {
-		devm_kfree(smmu->dev, cd_table->l1_desc);
+		kfree(cd_table->l1_desc);
 		cd_table->l1_desc = NULL;
 	}
 	return ret;
@@ -1414,21 +1414,18 @@ static void arm_smmu_free_cd_tables(struct arm_smmu_master *master)
 			if (!cd_table->l1_desc[i].l2ptr)
 				continue;
 
-			dmam_free_coherent(smmu->dev, size,
-					   cd_table->l1_desc[i].l2ptr,
-					   cd_table->l1_desc[i].l2ptr_dma);
+			dma_free_coherent(smmu->dev, size,
+					  cd_table->l1_desc[i].l2ptr,
+					  cd_table->l1_desc[i].l2ptr_dma);
 		}
-		devm_kfree(smmu->dev, cd_table->l1_desc);
-		cd_table->l1_desc = NULL;
+		kfree(cd_table->l1_desc);
 
 		l1size = cd_table->num_l1_ents * (CTXDESC_L1_DESC_DWORDS << 3);
 	} else {
 		l1size = cd_table->num_l1_ents * (CTXDESC_CD_DWORDS << 3);
 	}
 
-	dmam_free_coherent(smmu->dev, l1size, cd_table->cdtab, cd_table->cdtab_dma);
-	cd_table->cdtab_dma = 0;
-	cd_table->cdtab = NULL;
+	dma_free_coherent(smmu->dev, l1size, cd_table->cdtab, cd_table->cdtab_dma);
 }
 
 bool arm_smmu_free_asid(struct arm_smmu_ctx_desc *cd)
-- 
2.43.0

[PATCH AUTOSEL 6.10 111/197] cgroup: Disallow mounting v1 hierarchies without controller implementation

[Sasha Levin]

From: Michal Koutný <mkoutny@suse.com>

[ Upstream commit 3c41382e920f1dd5c9f432948fe799c07af1cced ]

The configs that disable some v1 controllers would still allow mounting
them but with no controller-specific files. (Making such hierarchies
equivalent to named v1 hierarchies.) To achieve behavior consistent with
actual out-compilation of a whole controller, the mounts should treat
respective controllers as non-existent.

Wrap implementation into a helper function, leverage legacy_files to
detect compiled out controllers. The effect is that mounts on v1 would
fail and produce a message like:
  [ 1543.999081] cgroup: Unknown subsys name 'memory'

Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cgroup/cgroup-v1.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c
index b9dbf6bf2779d..784337694a4be 100644
--- a/kernel/cgroup/cgroup-v1.c
+++ b/kernel/cgroup/cgroup-v1.c
@@ -46,6 +46,12 @@ bool cgroup1_ssid_disabled(int ssid)
 	return cgroup_no_v1_mask & (1 << ssid);
 }
 
+static bool cgroup1_subsys_absent(struct cgroup_subsys *ss)
+{
+	/* Check also dfl_cftypes for file-less controllers, i.e. perf_event */
+	return ss->legacy_cftypes == NULL && ss->dfl_cftypes;
+}
+
 /**
  * cgroup_attach_task_all - attach task 'tsk' to all cgroups of task 'from'
  * @from: attach to all cgroups of a given task
@@ -932,7 +938,8 @@ int cgroup1_parse_param(struct fs_context *fc, struct fs_parameter *param)
 		if (ret != -ENOPARAM)
 			return ret;
 		for_each_subsys(ss, i) {
-			if (strcmp(param->key, ss->legacy_name))
+			if (strcmp(param->key, ss->legacy_name) ||
+			    cgroup1_subsys_absent(ss))
 				continue;
 			if (!cgroup_ssid_enabled(i) || cgroup1_ssid_disabled(i))
 				return invalfc(fc, "Disabled controller '%s'",
@@ -1024,7 +1031,8 @@ static int check_cgroupfs_options(struct fs_context *fc)
 	mask = ~((u16)1 << cpuset_cgrp_id);
 #endif
 	for_each_subsys(ss, i)
-		if (cgroup_ssid_enabled(i) && !cgroup1_ssid_disabled(i))
+		if (cgroup_ssid_enabled(i) && !cgroup1_ssid_disabled(i) &&
+		    !cgroup1_subsys_absent(ss))
 			enabled |= 1 << i;
 
 	ctx->subsys_mask &= enabled;
-- 
2.43.0

[PATCH AUTOSEL 6.10 112/197] drm/stm: Avoid use-after-free issues with crtc and plane

[Sasha Levin]

From: Katya Orlova <e.orlova@ispras.ru>

[ Upstream commit 19dd9780b7ac673be95bf6fd6892a184c9db611f ]

ltdc_load() calls functions drm_crtc_init_with_planes(),
drm_universal_plane_init() and drm_encoder_init(). These functions
should not be called with parameters allocated with devm_kzalloc()
to avoid use-after-free issues [1].

Use allocations managed by the DRM framework.

Found by Linux Verification Center (linuxtesting.org).

[1]
https://lore.kernel.org/lkml/u366i76e3qhh3ra5oxrtngjtm2u5lterkekcz6y2jkndhuxzli@diujon4h7qwb/

Signed-off-by: Katya Orlova <e.orlova@ispras.ru>
Acked-by: Raphaël Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240216125040.8968-1-e.orlova@ispras.ru
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/stm/drv.c  |  3 +-
 drivers/gpu/drm/stm/ltdc.c | 73 ++++++++++----------------------------
 2 files changed, 20 insertions(+), 56 deletions(-)

diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index e8523abef27a5..152bec2c02385 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -25,6 +25,7 @@
 #include <drm/drm_module.h>
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_vblank.h>
+#include <drm/drm_managed.h>
 
 #include "ltdc.h"
 
@@ -75,7 +76,7 @@ static int drv_load(struct drm_device *ddev)
 
 	DRM_DEBUG("%s\n", __func__);
 
-	ldev = devm_kzalloc(ddev->dev, sizeof(*ldev), GFP_KERNEL);
+	ldev = drmm_kzalloc(ddev, sizeof(*ldev), GFP_KERNEL);
 	if (!ldev)
 		return -ENOMEM;
 
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 5576fdae49623..eeaabb4e10d3e 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -36,6 +36,7 @@
 #include <drm/drm_probe_helper.h>
 #include <drm/drm_simple_kms_helper.h>
 #include <drm/drm_vblank.h>
+#include <drm/drm_managed.h>
 
 #include <video/videomode.h>
 
@@ -1199,7 +1200,6 @@ static void ltdc_crtc_atomic_print_state(struct drm_printer *p,
 }
 
 static const struct drm_crtc_funcs ltdc_crtc_funcs = {
-	.destroy = drm_crtc_cleanup,
 	.set_config = drm_atomic_helper_set_config,
 	.page_flip = drm_atomic_helper_page_flip,
 	.reset = drm_atomic_helper_crtc_reset,
@@ -1212,7 +1212,6 @@ static const struct drm_crtc_funcs ltdc_crtc_funcs = {
 };
 
 static const struct drm_crtc_funcs ltdc_crtc_with_crc_support_funcs = {
-	.destroy = drm_crtc_cleanup,
 	.set_config = drm_atomic_helper_set_config,
 	.page_flip = drm_atomic_helper_page_flip,
 	.reset = drm_atomic_helper_crtc_reset,
@@ -1545,7 +1544,6 @@ static void ltdc_plane_atomic_print_state(struct drm_printer *p,
 static const struct drm_plane_funcs ltdc_plane_funcs = {
 	.update_plane = drm_atomic_helper_update_plane,
 	.disable_plane = drm_atomic_helper_disable_plane,
-	.destroy = drm_plane_cleanup,
 	.reset = drm_atomic_helper_plane_reset,
 	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
 	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
@@ -1572,7 +1570,6 @@ static struct drm_plane *ltdc_plane_create(struct drm_device *ddev,
 	const u64 *modifiers = ltdc_format_modifiers;
 	u32 lofs = index * LAY_OFS;
 	u32 val;
-	int ret;
 
 	/* Allocate the biggest size according to supported color formats */
 	formats = devm_kzalloc(dev, (ldev->caps.pix_fmt_nb +
@@ -1613,14 +1610,10 @@ static struct drm_plane *ltdc_plane_create(struct drm_device *ddev,
 		}
 	}
 
-	plane = devm_kzalloc(dev, sizeof(*plane), GFP_KERNEL);
-	if (!plane)
-		return NULL;
-
-	ret = drm_universal_plane_init(ddev, plane, possible_crtcs,
-				       &ltdc_plane_funcs, formats, nb_fmt,
-				       modifiers, type, NULL);
-	if (ret < 0)
+	plane = drmm_universal_plane_alloc(ddev, struct drm_plane, dev,
+					   possible_crtcs, &ltdc_plane_funcs, formats,
+					   nb_fmt, modifiers, type, NULL);
+	if (IS_ERR(plane))
 		return NULL;
 
 	if (ldev->caps.ycbcr_input) {
@@ -1643,15 +1636,6 @@ static struct drm_plane *ltdc_plane_create(struct drm_device *ddev,
 	return plane;
 }
 
-static void ltdc_plane_destroy_all(struct drm_device *ddev)
-{
-	struct drm_plane *plane, *plane_temp;
-
-	list_for_each_entry_safe(plane, plane_temp,
-				 &ddev->mode_config.plane_list, head)
-		drm_plane_cleanup(plane);
-}
-
 static int ltdc_crtc_init(struct drm_device *ddev, struct drm_crtc *crtc)
 {
 	struct ltdc_device *ldev = ddev->dev_private;
@@ -1677,14 +1661,14 @@ static int ltdc_crtc_init(struct drm_device *ddev, struct drm_crtc *crtc)
 
 	/* Init CRTC according to its hardware features */
 	if (ldev->caps.crc)
-		ret = drm_crtc_init_with_planes(ddev, crtc, primary, NULL,
-						&ltdc_crtc_with_crc_support_funcs, NULL);
+		ret = drmm_crtc_init_with_planes(ddev, crtc, primary, NULL,
+						 &ltdc_crtc_with_crc_support_funcs, NULL);
 	else
-		ret = drm_crtc_init_with_planes(ddev, crtc, primary, NULL,
-						&ltdc_crtc_funcs, NULL);
+		ret = drmm_crtc_init_with_planes(ddev, crtc, primary, NULL,
+						 &ltdc_crtc_funcs, NULL);
 	if (ret) {
 		DRM_ERROR("Can not initialize CRTC\n");
-		goto cleanup;
+		return ret;
 	}
 
 	drm_crtc_helper_add(crtc, &ltdc_crtc_helper_funcs);
@@ -1698,9 +1682,8 @@ static int ltdc_crtc_init(struct drm_device *ddev, struct drm_crtc *crtc)
 	for (i = 1; i < ldev->caps.nb_layers; i++) {
 		overlay = ltdc_plane_create(ddev, DRM_PLANE_TYPE_OVERLAY, i);
 		if (!overlay) {
-			ret = -ENOMEM;
 			DRM_ERROR("Can not create overlay plane %d\n", i);
-			goto cleanup;
+			return -ENOMEM;
 		}
 		if (ldev->caps.dynamic_zorder)
 			drm_plane_create_zpos_property(overlay, i, 0, ldev->caps.nb_layers - 1);
@@ -1713,10 +1696,6 @@ static int ltdc_crtc_init(struct drm_device *ddev, struct drm_crtc *crtc)
 	}
 
 	return 0;
-
-cleanup:
-	ltdc_plane_destroy_all(ddev);
-	return ret;
 }
 
 static void ltdc_encoder_disable(struct drm_encoder *encoder)
@@ -1776,23 +1755,19 @@ static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
 	struct drm_encoder *encoder;
 	int ret;
 
-	encoder = devm_kzalloc(ddev->dev, sizeof(*encoder), GFP_KERNEL);
-	if (!encoder)
-		return -ENOMEM;
+	encoder = drmm_simple_encoder_alloc(ddev, struct drm_encoder, dev,
+					    DRM_MODE_ENCODER_DPI);
+	if (IS_ERR(encoder))
+		return PTR_ERR(encoder);
 
 	encoder->possible_crtcs = CRTC_MASK;
 	encoder->possible_clones = 0;	/* No cloning support */
 
-	drm_simple_encoder_init(ddev, encoder, DRM_MODE_ENCODER_DPI);
-
 	drm_encoder_helper_add(encoder, &ltdc_encoder_helper_funcs);
 
 	ret = drm_bridge_attach(encoder, bridge, NULL, 0);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			drm_encoder_cleanup(encoder);
+	if (ret)
 		return ret;
-	}
 
 	DRM_DEBUG_DRIVER("Bridge encoder:%d created\n", encoder->base.id);
 
@@ -1962,8 +1937,7 @@ int ltdc_load(struct drm_device *ddev)
 			goto err;
 
 		if (panel) {
-			bridge = drm_panel_bridge_add_typed(panel,
-							    DRM_MODE_CONNECTOR_DPI);
+			bridge = drmm_panel_bridge_add(ddev, panel);
 			if (IS_ERR(bridge)) {
 				DRM_ERROR("panel-bridge endpoint %d\n", i);
 				ret = PTR_ERR(bridge);
@@ -2045,7 +2019,7 @@ int ltdc_load(struct drm_device *ddev)
 		}
 	}
 
-	crtc = devm_kzalloc(dev, sizeof(*crtc), GFP_KERNEL);
+	crtc = drmm_kzalloc(ddev, sizeof(*crtc), GFP_KERNEL);
 	if (!crtc) {
 		DRM_ERROR("Failed to allocate crtc\n");
 		ret = -ENOMEM;
@@ -2072,9 +2046,6 @@ int ltdc_load(struct drm_device *ddev)
 
 	return 0;
 err:
-	for (i = 0; i < nb_endpoints; i++)
-		drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
-
 	clk_disable_unprepare(ldev->pixel_clk);
 
 	return ret;
@@ -2082,16 +2053,8 @@ int ltdc_load(struct drm_device *ddev)
 
 void ltdc_unload(struct drm_device *ddev)
 {
-	struct device *dev = ddev->dev;
-	int nb_endpoints, i;
-
 	DRM_DEBUG_DRIVER("\n");
 
-	nb_endpoints = of_graph_get_endpoint_count(dev->of_node);
-
-	for (i = 0; i < nb_endpoints; i++)
-		drm_of_panel_bridge_remove(ddev->dev->of_node, 0, i);
-
 	pm_runtime_disable(ddev->dev);
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 113/197] drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 5559598742fb4538e4c51c48ef70563c49c2af23 ]

[WHAT & HOW]
"dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it
cannot be a null pointer. Let's pass a valid pointer to avoid null
dereference.

This fixes 2 FORWARD_NULL issues reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c | 3 ++-
 drivers/gpu/drm/amd/display/dc/resource/dcn21/dcn21_resource.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c
index 6b380e037e3f8..c0d1b41eb9004 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn20/dcn20_resource.c
@@ -2033,6 +2033,7 @@ bool dcn20_fast_validate_bw(
 {
 	bool out = false;
 	int split[MAX_PIPES] = { 0 };
+	bool merge[MAX_PIPES] = { false };
 	int pipe_cnt, i, pipe_idx, vlevel;
 
 	ASSERT(pipes);
@@ -2057,7 +2058,7 @@ bool dcn20_fast_validate_bw(
 	if (vlevel > context->bw_ctx.dml.soc.num_states)
 		goto validate_fail;
 
-	vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, NULL);
+	vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, merge);
 
 	/*initialize pipe_just_split_from to invalid idx*/
 	for (i = 0; i < MAX_PIPES; i++)
diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn21/dcn21_resource.c
index 8663cbc3d1cf5..347e6aaea582f 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn21/dcn21_resource.c
@@ -774,6 +774,7 @@ bool dcn21_fast_validate_bw(struct dc *dc,
 {
 	bool out = false;
 	int split[MAX_PIPES] = { 0 };
+	bool merge[MAX_PIPES] = { false };
 	int pipe_cnt, i, pipe_idx, vlevel;
 
 	ASSERT(pipes);
@@ -816,7 +817,7 @@ bool dcn21_fast_validate_bw(struct dc *dc,
 			goto validate_fail;
 	}
 
-	vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, NULL);
+	vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, merge);
 
 	for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) {
 		struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i];
-- 
2.43.0

[PATCH AUTOSEL 6.10 114/197] drm/amd/display: Check null pointers before using them

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 1ff12bcd7deaeed25efb5120433c6a45dd5504a8 ]

[WHAT & HOW]
These pointers are null checked previously in the same function,
indicating they might be null as reported by Coverity. As a result,
they need to be checked when used again.

This fixes 3 FORWARD_NULL issue reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 27e641f176289..3c418428264ca 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -6935,6 +6935,9 @@ create_validate_stream_for_sink(struct amdgpu_dm_connector *aconnector,
 	int requested_bpc = drm_state ? drm_state->max_requested_bpc : 8;
 	enum dc_status dc_result = DC_OK;
 
+	if (!dm_state)
+		return NULL;
+
 	do {
 		stream = create_stream_for_sink(connector, drm_mode,
 						dm_state, old_stream,
@@ -8947,7 +8950,7 @@ static void amdgpu_dm_commit_streams(struct drm_atomic_state *state,
 		if (acrtc)
 			old_crtc_state = drm_atomic_get_old_crtc_state(state, &acrtc->base);
 
-		if (!acrtc->wb_enabled)
+		if (!acrtc || !acrtc->wb_enabled)
 			continue;
 
 		dm_old_crtc_state = to_dm_crtc_state(old_crtc_state);
@@ -9346,9 +9349,10 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state)
 
 			DRM_INFO("[HDCP_DM] hdcp_update_display enable_encryption = %x\n", enable_encryption);
 
-			hdcp_update_display(
-				adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector,
-				new_con_state->hdcp_content_type, enable_encryption);
+			if (aconnector->dc_link)
+				hdcp_update_display(
+					adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector,
+					new_con_state->hdcp_content_type, enable_encryption);
 		}
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 115/197] drm/amdgpu: disallow multiple BO_HANDLES chunks in one submit

[Sasha Levin]

From: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>

[ Upstream commit fec5f8e8c6bcf83ed7a392801d7b44c5ecfc1e82 ]

Before this commit, only submits with both a BO_HANDLES chunk and a
'bo_list_handle' would be rejected (by amdgpu_cs_parser_bos).

But if UMD sent multiple BO_HANDLES, what would happen is:
* only the last one would be really used
* all the others would leak memory as amdgpu_cs_p1_bo_handles would
  overwrite the previous p->bo_list value

This commit rejects submissions with multiple BO_HANDLES chunks to
match the implementation of the parser.

Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
index 6dfdff58bffd1..78b3c067fea7e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
@@ -263,6 +263,10 @@ static int amdgpu_cs_pass1(struct amdgpu_cs_parser *p,
 			if (size < sizeof(struct drm_amdgpu_bo_list_in))
 				goto free_partial_kdata;
 
+			/* Only a single BO list is allowed to simplify handling. */
+			if (p->bo_list)
+				ret = -EINVAL;
+
 			ret = amdgpu_cs_p1_bo_handles(p, p->chunks[i].kdata);
 			if (ret)
 				goto free_partial_kdata;
-- 
2.43.0

[PATCH AUTOSEL 6.10 116/197] drm/amdkfd: amdkfd_free_gtt_mem clear the correct pointer

[Sasha Levin]

From: Philip Yang <Philip.Yang@amd.com>

[ Upstream commit c86ad39140bbcb9dc75a10046c2221f657e8083b ]

Pass pointer reference to amdgpu_bo_unref to clear the correct pointer,
otherwise amdgpu_bo_unref clear the local variable, the original pointer
not set to NULL, this could cause use-after-free bug.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c         | 14 +++++++-------
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h         |  2 +-
 drivers/gpu/drm/amd/amdkfd/kfd_chardev.c           |  2 +-
 drivers/gpu/drm/amd/amdkfd/kfd_device.c            |  4 ++--
 .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c  |  2 +-
 drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c       |  2 +-
 drivers/gpu/drm/amd/amdkfd/kfd_process.c           |  2 +-
 .../gpu/drm/amd/amdkfd/kfd_process_queue_manager.c |  4 ++--
 8 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
index e3738d4172458..26ecca3e8e900 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
@@ -360,15 +360,15 @@ int amdgpu_amdkfd_alloc_gtt_mem(struct amdgpu_device *adev, size_t size,
 	return r;
 }
 
-void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void *mem_obj)
+void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj)
 {
-	struct amdgpu_bo *bo = (struct amdgpu_bo *) mem_obj;
+	struct amdgpu_bo **bo = (struct amdgpu_bo **) mem_obj;
 
-	amdgpu_bo_reserve(bo, true);
-	amdgpu_bo_kunmap(bo);
-	amdgpu_bo_unpin(bo);
-	amdgpu_bo_unreserve(bo);
-	amdgpu_bo_unref(&(bo));
+	amdgpu_bo_reserve(*bo, true);
+	amdgpu_bo_kunmap(*bo);
+	amdgpu_bo_unpin(*bo);
+	amdgpu_bo_unreserve(*bo);
+	amdgpu_bo_unref(bo);
 }
 
 int amdgpu_amdkfd_alloc_gws(struct amdgpu_device *adev, size_t size,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
index 1de021ebdd467..ee16d8a9ba559 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
@@ -233,7 +233,7 @@ int amdgpu_amdkfd_bo_validate_and_fence(struct amdgpu_bo *bo,
 int amdgpu_amdkfd_alloc_gtt_mem(struct amdgpu_device *adev, size_t size,
 				void **mem_obj, uint64_t *gpu_addr,
 				void **cpu_ptr, bool mqd_gfx9);
-void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void *mem_obj);
+void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
 int amdgpu_amdkfd_alloc_gws(struct amdgpu_device *adev, size_t size,
 				void **mem_obj);
 void amdgpu_amdkfd_free_gws(struct amdgpu_device *adev, void *mem_obj);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
index fdf171ad4a3c6..4f260adce8c46 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
@@ -423,7 +423,7 @@ static int kfd_ioctl_create_queue(struct file *filep, struct kfd_process *p,
 
 err_create_queue:
 	if (wptr_bo)
-		amdgpu_amdkfd_free_gtt_mem(dev->adev, wptr_bo);
+		amdgpu_amdkfd_free_gtt_mem(dev->adev, (void **)&wptr_bo);
 err_wptr_map_gart:
 err_bind_process:
 err_pdd:
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
index afc57df421cd9..3343079f28c90 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -863,7 +863,7 @@ bool kgd2kfd_device_init(struct kfd_dev *kfd,
 kfd_doorbell_error:
 	kfd_gtt_sa_fini(kfd);
 kfd_gtt_sa_init_error:
-	amdgpu_amdkfd_free_gtt_mem(kfd->adev, kfd->gtt_mem);
+	amdgpu_amdkfd_free_gtt_mem(kfd->adev, &kfd->gtt_mem);
 alloc_gtt_mem_failure:
 	dev_err(kfd_device,
 		"device %x:%x NOT added due to errors\n",
@@ -881,7 +881,7 @@ void kgd2kfd_device_exit(struct kfd_dev *kfd)
 		kfd_doorbell_fini(kfd);
 		ida_destroy(&kfd->doorbell_ida);
 		kfd_gtt_sa_fini(kfd);
-		amdgpu_amdkfd_free_gtt_mem(kfd->adev, kfd->gtt_mem);
+		amdgpu_amdkfd_free_gtt_mem(kfd->adev, &kfd->gtt_mem);
 	}
 
 	kfree(kfd);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index c08b6ee252898..dbef9eac2694f 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -2633,7 +2633,7 @@ static void deallocate_hiq_sdma_mqd(struct kfd_node *dev,
 {
 	WARN(!mqd, "No hiq sdma mqd trunk to free");
 
-	amdgpu_amdkfd_free_gtt_mem(dev->adev, mqd->gtt_mem);
+	amdgpu_amdkfd_free_gtt_mem(dev->adev, &mqd->gtt_mem);
 }
 
 void device_queue_manager_uninit(struct device_queue_manager *dqm)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
index 8746a61a852dc..d501fd2222dc3 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager.c
@@ -223,7 +223,7 @@ void kfd_free_mqd_cp(struct mqd_manager *mm, void *mqd,
 	      struct kfd_mem_obj *mqd_mem_obj)
 {
 	if (mqd_mem_obj->gtt_mem) {
-		amdgpu_amdkfd_free_gtt_mem(mm->dev->adev, mqd_mem_obj->gtt_mem);
+		amdgpu_amdkfd_free_gtt_mem(mm->dev->adev, &mqd_mem_obj->gtt_mem);
 		kfree(mqd_mem_obj);
 	} else {
 		kfd_gtt_sa_free(mm->dev, mqd_mem_obj);
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
index 451bb058cc620..66150ea8e64d8 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c
@@ -1048,7 +1048,7 @@ static void kfd_process_destroy_pdds(struct kfd_process *p)
 
 		if (pdd->dev->kfd->shared_resources.enable_mes)
 			amdgpu_amdkfd_free_gtt_mem(pdd->dev->adev,
-						   pdd->proc_ctx_bo);
+						   &pdd->proc_ctx_bo);
 		/*
 		 * before destroying pdd, make sure to report availability
 		 * for auto suspend
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
index a5bdc3258ae54..c97b4fc44859d 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
@@ -201,9 +201,9 @@ static void pqm_clean_queue_resource(struct process_queue_manager *pqm,
 	}
 
 	if (dev->kfd->shared_resources.enable_mes) {
-		amdgpu_amdkfd_free_gtt_mem(dev->adev, pqn->q->gang_ctx_bo);
+		amdgpu_amdkfd_free_gtt_mem(dev->adev, &pqn->q->gang_ctx_bo);
 		if (pqn->q->wptr_bo)
-			amdgpu_amdkfd_free_gtt_mem(dev->adev, pqn->q->wptr_bo);
+			amdgpu_amdkfd_free_gtt_mem(dev->adev, (void **)&pqn->q->wptr_bo);
 	}
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 117/197] drm/amd/display: Add null check for head_pipe in dcn201_acquire_free_pipe_for_layer

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit f22f4754aaa47d8c59f166ba3042182859e5dff7 ]

This commit addresses a potential null pointer dereference issue in the
`dcn201_acquire_free_pipe_for_layer` function. The issue could occur
when `head_pipe` is null.

The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c  | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c
index 070a4efb308bd..1aeede348bd39 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn201/dcn201_resource.c
@@ -1005,8 +1005,10 @@ static struct pipe_ctx *dcn201_acquire_free_pipe_for_layer(
 	struct pipe_ctx *head_pipe = resource_get_otg_master_for_stream(res_ctx, opp_head_pipe->stream);
 	struct pipe_ctx *idle_pipe = resource_find_free_secondary_pipe_legacy(res_ctx, pool, head_pipe);
 
-	if (!head_pipe)
+	if (!head_pipe) {
 		ASSERT(0);
+		return NULL;
+	}
 
 	if (!idle_pipe)
 		return NULL;
-- 
2.43.0

[PATCH AUTOSEL 6.10 118/197] drm/amd/display: Add null check for head_pipe in dcn32_acquire_idle_pipe_for_head_pipe_in_layer

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit ac2140449184a26eac99585b7f69814bd3ba8f2d ]

This commit addresses a potential null pointer dereference issue in the
`dcn32_acquire_idle_pipe_for_head_pipe_in_layer` function. The issue
could occur when `head_pipe` is null.

The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn32/dcn32_resource.c:2690 dcn32_acquire_idle_pipe_for_head_pipe_in_layer() error: we previously assumed 'head_pipe' could be null (see line 2681)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c
index d84c8e0e5c2f0..9209bcad699a8 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c
@@ -2664,8 +2664,10 @@ static struct pipe_ctx *dcn32_acquire_idle_pipe_for_head_pipe_in_layer(
 	struct resource_context *old_ctx = &stream->ctx->dc->current_state->res_ctx;
 	int head_index;
 
-	if (!head_pipe)
+	if (!head_pipe) {
 		ASSERT(0);
+		return NULL;
+	}
 
 	/*
 	 * Modified from dcn20_acquire_idle_pipe_for_layer
-- 
2.43.0

[PATCH AUTOSEL 6.10 119/197] drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in dcn30_init_hw

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit cba7fec864172dadd953daefdd26e01742b71a6a ]

This commit addresses a potential null pointer dereference issue in the
`dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.

The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c
index 4c47061533050..f3422a323b71a 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn30/dcn30_hwseq.c
@@ -622,7 +622,7 @@ void dcn30_init_hw(struct dc *dc)
 	uint32_t backlight = MAX_BACKLIGHT_LEVEL;
 	uint32_t user_level = MAX_BACKLIGHT_LEVEL;
 
-	if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks)
+	if (dc->clk_mgr && dc->clk_mgr->funcs && dc->clk_mgr->funcs->init_clocks)
 		dc->clk_mgr->funcs->init_clocks(dc->clk_mgr);
 
 	// Initialize the dccg
@@ -783,11 +783,12 @@ void dcn30_init_hw(struct dc *dc)
 	if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks)
 		dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub);
 
-	if (dc->clk_mgr->funcs->notify_wm_ranges)
+	if (dc->clk_mgr && dc->clk_mgr->funcs && dc->clk_mgr->funcs->notify_wm_ranges)
 		dc->clk_mgr->funcs->notify_wm_ranges(dc->clk_mgr);
 
 	//if softmax is enabled then hardmax will be set by a different call
-	if (dc->clk_mgr->funcs->set_hard_max_memclk && !dc->clk_mgr->dc_mode_softmax_enabled)
+	if (dc->clk_mgr && dc->clk_mgr->funcs && dc->clk_mgr->funcs->set_hard_max_memclk &&
+	    !dc->clk_mgr->dc_mode_softmax_enabled)
 		dc->clk_mgr->funcs->set_hard_max_memclk(dc->clk_mgr);
 
 	if (dc->res_pool->hubbub->funcs->force_pstate_change_control)
-- 
2.43.0

[PATCH AUTOSEL 6.10 120/197] drm/amd/display: Add NULL check for clk_mgr in dcn32_init_hw

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit c395fd47d1565bd67671f45cca281b3acc2c31ef ]

This commit addresses a potential null pointer dereference issue in the
`dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is
null.

The fix adds a check to ensure `dc->clk_mgr` is not null before
accessing its functions. This prevents a potential null pointer
dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
index b8e884368dc6e..8759c14a63226 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
@@ -752,7 +752,7 @@ void dcn32_init_hw(struct dc *dc)
 	uint32_t backlight = MAX_BACKLIGHT_LEVEL;
 	uint32_t user_level = MAX_BACKLIGHT_LEVEL;
 
-	if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks)
+	if (dc->clk_mgr && dc->clk_mgr->funcs && dc->clk_mgr->funcs->init_clocks)
 		dc->clk_mgr->funcs->init_clocks(dc->clk_mgr);
 
 	// Initialize the dccg
@@ -931,10 +931,11 @@ void dcn32_init_hw(struct dc *dc)
 	if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks)
 		dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub);
 
-	if (dc->clk_mgr->funcs->notify_wm_ranges)
+	if (dc->clk_mgr && dc->clk_mgr->funcs && dc->clk_mgr->funcs->notify_wm_ranges)
 		dc->clk_mgr->funcs->notify_wm_ranges(dc->clk_mgr);
 
-	if (dc->clk_mgr->funcs->set_hard_max_memclk && !dc->clk_mgr->dc_mode_softmax_enabled)
+	if (dc->clk_mgr && dc->clk_mgr->funcs && dc->clk_mgr->funcs->set_hard_max_memclk &&
+	    !dc->clk_mgr->dc_mode_softmax_enabled)
 		dc->clk_mgr->funcs->set_hard_max_memclk(dc->clk_mgr);
 
 	if (dc->res_pool->hubbub->funcs->force_pstate_change_control)
-- 
2.43.0

[PATCH AUTOSEL 6.10 121/197] drm/xe/hdcp: Check GSC structure validity

[Sasha Levin]

From: Suraj Kandpal <suraj.kandpal@intel.com>

[ Upstream commit b4224f6bae3801d589f815672ec62800a1501b0d ]

Sometimes xe_gsc is not initialized when checked at HDCP capability
check. Add gsc structure check to avoid null pointer error.

Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722064451.3610512-4-suraj.kandpal@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/xe/display/xe_hdcp_gsc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c b/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c
index b3d3c065dd9d8..2f935771658e6 100644
--- a/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c
+++ b/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c
@@ -39,10 +39,14 @@ bool intel_hdcp_gsc_check_status(struct xe_device *xe)
 {
 	struct xe_tile *tile = xe_device_get_root_tile(xe);
 	struct xe_gt *gt = tile->media_gt;
+	struct xe_gsc *gsc = &gt->uc.gsc;
 	bool ret = true;
 
-	if (!xe_uc_fw_is_enabled(&gt->uc.gsc.fw))
+	if (!gsc && !xe_uc_fw_is_enabled(&gsc->fw)) {
+		drm_dbg_kms(&xe->drm,
+			    "GSC Components not ready for HDCP2.x\n");
 		return false;
+	}
 
 	xe_pm_runtime_get(xe);
 	if (xe_force_wake_get(gt_to_fw(gt), XE_FW_GSC)) {
@@ -52,7 +56,7 @@ bool intel_hdcp_gsc_check_status(struct xe_device *xe)
 		goto out;
 	}
 
-	if (!xe_gsc_proxy_init_done(&gt->uc.gsc))
+	if (!xe_gsc_proxy_init_done(gsc))
 		ret = false;
 
 	xe_force_wake_put(gt_to_fw(gt), XE_FW_GSC);
-- 
2.43.0

[PATCH AUTOSEL 6.10 122/197] drm/amd/display: Add null check for top_pipe_to_program in commit_planes_for_stream

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 66d71a72539e173a9b00ca0b1852cbaa5f5bf1ad ]

This commit addresses a null pointer dereference issue in the
`commit_planes_for_stream` function at line 4140. The issue could occur
when `top_pipe_to_program` is null.

The fix adds a check to ensure `top_pipe_to_program` is not null before
accessing its stream_res. This prevents a null pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index da237f718dbdd..3bd18e862945f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -3970,7 +3970,8 @@ static void commit_planes_for_stream(struct dc *dc,
 	}
 
 	if ((update_type != UPDATE_TYPE_FAST) && stream->update_flags.bits.dsc_changed)
-		if (top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
+		if (top_pipe_to_program &&
+		    top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
 			top_pipe_to_program->stream_res.tg->funcs->wait_for_state(
 				top_pipe_to_program->stream_res.tg,
 				CRTC_STATE_VACTIVE);
-- 
2.43.0

[PATCH AUTOSEL 6.10 123/197] drm/amd/display: Use gpuvm_min_page_size_kbytes for DML2 surfaces

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit 31663521ede2edb622ee1b397ae3ac666d6351c5 ]

[Why]
It's currently hard coded to 256 when it should be using the SOC
provided values. This can result in corruption with linear surfaces
where we prefetch more PTE than the buffer can hold.

[How]
Update the min page size correctly for the plane.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../display/dc/dml2/dml2_translation_helper.c | 20 +++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
index edff6b447680c..d5dbfb33f93dc 100644
--- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
+++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c
@@ -828,7 +828,9 @@ static void get_scaler_data_for_plane(const struct dc_plane_state *in, struct dc
 	memcpy(out, &temp_pipe->plane_res.scl_data, sizeof(*out));
 }
 
-static void populate_dummy_dml_plane_cfg(struct dml_plane_cfg_st *out, unsigned int location, const struct dc_stream_state *in)
+static void populate_dummy_dml_plane_cfg(struct dml_plane_cfg_st *out, unsigned int location,
+					 const struct dc_stream_state *in,
+					 const struct soc_bounding_box_st *soc)
 {
 	dml_uint_t width, height;
 
@@ -845,7 +847,7 @@ static void populate_dummy_dml_plane_cfg(struct dml_plane_cfg_st *out, unsigned
 	out->CursorBPP[location] = dml_cur_32bit;
 	out->CursorWidth[location] = 256;
 
-	out->GPUVMMinPageSizeKBytes[location] = 256;
+	out->GPUVMMinPageSizeKBytes[location] = soc->gpuvm_min_page_size_kbytes;
 
 	out->ViewportWidth[location] = width;
 	out->ViewportHeight[location] = height;
@@ -882,7 +884,9 @@ static void populate_dummy_dml_plane_cfg(struct dml_plane_cfg_st *out, unsigned
 	out->ScalerEnabled[location] = false;
 }
 
-static void populate_dml_plane_cfg_from_plane_state(struct dml_plane_cfg_st *out, unsigned int location, const struct dc_plane_state *in, struct dc_state *context)
+static void populate_dml_plane_cfg_from_plane_state(struct dml_plane_cfg_st *out, unsigned int location,
+						    const struct dc_plane_state *in, struct dc_state *context,
+						    const struct soc_bounding_box_st *soc)
 {
 	struct scaler_data *scaler_data = kzalloc(sizeof(*scaler_data), GFP_KERNEL);
 	if (!scaler_data)
@@ -893,7 +897,7 @@ static void populate_dml_plane_cfg_from_plane_state(struct dml_plane_cfg_st *out
 	out->CursorBPP[location] = dml_cur_32bit;
 	out->CursorWidth[location] = 256;
 
-	out->GPUVMMinPageSizeKBytes[location] = 256;
+	out->GPUVMMinPageSizeKBytes[location] = soc->gpuvm_min_page_size_kbytes;
 
 	out->ViewportWidth[location] = scaler_data->viewport.width;
 	out->ViewportHeight[location] = scaler_data->viewport.height;
@@ -1174,7 +1178,8 @@ void map_dc_state_into_dml_display_cfg(struct dml2_context *dml2, struct dc_stat
 			disp_cfg_plane_location = dml_dispcfg->num_surfaces++;
 
 			populate_dummy_dml_surface_cfg(&dml_dispcfg->surface, disp_cfg_plane_location, context->streams[i]);
-			populate_dummy_dml_plane_cfg(&dml_dispcfg->plane, disp_cfg_plane_location, context->streams[i]);
+			populate_dummy_dml_plane_cfg(&dml_dispcfg->plane, disp_cfg_plane_location,
+						     context->streams[i], &dml2->v20.dml_core_ctx.soc);
 
 			dml_dispcfg->plane.BlendingAndTiming[disp_cfg_plane_location] = disp_cfg_stream_location;
 
@@ -1190,7 +1195,10 @@ void map_dc_state_into_dml_display_cfg(struct dml2_context *dml2, struct dc_stat
 				ASSERT(disp_cfg_plane_location >= 0 && disp_cfg_plane_location <= __DML2_WRAPPER_MAX_STREAMS_PLANES__);
 
 				populate_dml_surface_cfg_from_plane_state(dml2->v20.dml_core_ctx.project, &dml_dispcfg->surface, disp_cfg_plane_location, context->stream_status[i].plane_states[j]);
-				populate_dml_plane_cfg_from_plane_state(&dml_dispcfg->plane, disp_cfg_plane_location, context->stream_status[i].plane_states[j], context);
+				populate_dml_plane_cfg_from_plane_state(
+					&dml_dispcfg->plane, disp_cfg_plane_location,
+					context->stream_status[i].plane_states[j], context,
+					&dml2->v20.dml_core_ctx.soc);
 
 				if (stream_mall_type == SUBVP_MAIN) {
 					dml_dispcfg->plane.UseMALLForPStateChange[disp_cfg_plane_location] = dml_use_mall_pstate_change_sub_viewport;
-- 
2.43.0

[PATCH AUTOSEL 6.10 124/197] ata: pata_serverworks: Do not use the term blacklist

[Sasha Levin]

From: Damien Le Moal <dlemoal@kernel.org>

[ Upstream commit 858048568c9e3887d8b19e101ee72f129d65cb15 ]

Let's not use the term blacklist in the function
serverworks_osb4_filter() documentation comment and rather simply refer
to what that function looks at: the list of devices with groken UDMA5.

While at it, also constify the values of the csb_bad_ata100 array.

Of note is that all of this should probably be handled using libata
quirk mechanism but it is unclear if these UDMA5 quirks are specific
to this controller only.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/pata_serverworks.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 549ff24a98231..4edddf6bcc150 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -46,10 +46,11 @@
 #define SVWKS_CSB5_REVISION_NEW	0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION	0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
 
-/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
- * can overrun their FIFOs when used with the CSB5 */
-
-static const char *csb_bad_ata100[] = {
+/*
+ * Seagate Barracuda ATA IV Family drives in UDMA mode 5
+ * can overrun their FIFOs when used with the CSB5.
+ */
+static const char * const csb_bad_ata100[] = {
 	"ST320011A",
 	"ST340016A",
 	"ST360021A",
@@ -163,10 +164,11 @@ static unsigned int serverworks_osb4_filter(struct ata_device *adev, unsigned in
  *	@adev: ATA device
  *	@mask: Mask of proposed modes
  *
- *	Check the blacklist and disable UDMA5 if matched
+ *	Check the list of devices with broken UDMA5 and
+ *	disable UDMA5 if matched.
  */
-
-static unsigned int serverworks_csb_filter(struct ata_device *adev, unsigned int mask)
+static unsigned int serverworks_csb_filter(struct ata_device *adev,
+					   unsigned int mask)
 {
 	const char *p;
 	char model_num[ATA_ID_PROD_LEN + 1];
-- 
2.43.0

[PATCH AUTOSEL 6.10 125/197] ata: sata_sil: Rename sil_blacklist to sil_quirks

[Sasha Levin]

From: Damien Le Moal <dlemoal@kernel.org>

[ Upstream commit 93b0f9e11ce511353c65b7f924cf5f95bd9c3aba ]

Rename the array sil_blacklist to sil_quirks as this name is more
neutral and is also consistent with how this driver define quirks with
the SIL_QUIRK_XXX flags.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/sata_sil.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index cc77c02482843..df095659bae0f 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -128,7 +128,7 @@ static const struct pci_device_id sil_pci_tbl[] = {
 static const struct sil_drivelist {
 	const char *product;
 	unsigned int quirk;
-} sil_blacklist [] = {
+} sil_quirks[] = {
 	{ "ST320012AS",		SIL_QUIRK_MOD15WRITE },
 	{ "ST330013AS",		SIL_QUIRK_MOD15WRITE },
 	{ "ST340017AS",		SIL_QUIRK_MOD15WRITE },
@@ -600,8 +600,8 @@ static void sil_thaw(struct ata_port *ap)
  *	list, and apply the fixups to only the specific
  *	devices/hosts/firmwares that need it.
  *
- *	20040111 - Seagate drives affected by the Mod15Write bug are blacklisted
- *	The Maxtor quirk is in the blacklist, but I'm keeping the original
+ *	20040111 - Seagate drives affected by the Mod15Write bug are quirked
+ *	The Maxtor quirk is in sil_quirks, but I'm keeping the original
  *	pessimistic fix for the following reasons...
  *	- There seems to be less info on it, only one device gleaned off the
  *	Windows	driver, maybe only one is affected.  More info would be greatly
@@ -620,9 +620,9 @@ static void sil_dev_config(struct ata_device *dev)
 
 	ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
 
-	for (n = 0; sil_blacklist[n].product; n++)
-		if (!strcmp(sil_blacklist[n].product, model_num)) {
-			quirks = sil_blacklist[n].quirk;
+	for (n = 0; sil_quirks[n].product; n++)
+		if (!strcmp(sil_quirks[n].product, model_num)) {
+			quirks = sil_quirks[n].quirk;
 			break;
 		}
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 126/197] scsi: smartpqi: Add new controller PCI IDs

[Sasha Levin]

From: David Strahan <David.Strahan@microchip.com>

[ Upstream commit 0e21e73384d324f75ea16f3d622cfc433fa6209b ]

All PCI ID entries in hex.

Add new inagile PCI IDs:
                                             VID  / DID  / SVID / SDID
                                             ----   ----   ----   ----
            SMART-HBA 8242-24i               9005 / 028f / 1ff9 / 0045
            RAID 8236-16i                    9005 / 028f / 1ff9 / 0046
            RAID 8240-24i                    9005 / 028f / 1ff9 / 0047
            SMART-HBA 8238-16i               9005 / 028f / 1ff9 / 0048
            PM8222-SHBA                      9005 / 028f / 1ff9 / 004a
            RAID PM8204-2GB                  9005 / 028f / 1ff9 / 004b
            RAID PM8204-4GB                  9005 / 028f / 1ff9 / 004c
            PM8222-HBA                       9005 / 028f / 1ff9 / 004f
            MT0804M6R                        9005 / 028f / 1ff9 / 0051
            MT0801M6E                        9005 / 028f / 1ff9 / 0052
            MT0808M6R                        9005 / 028f / 1ff9 / 0053
            MT0800M6H                        9005 / 028f / 1ff9 / 0054
            RS0800M5H24i                     9005 / 028f / 1ff9 / 006b
            RS0800M5E8i                      9005 / 028f / 1ff9 / 006c
            RS0800M5H8i                      9005 / 028f / 1ff9 / 006d
            RS0804M5R16i                     9005 / 028f / 1ff9 / 006f
            RS0800M5E24i                     9005 / 028f / 1ff9 / 0070
            RS0800M5H16i                     9005 / 028f / 1ff9 / 0071
            RS0800M5E16i                     9005 / 028f / 1ff9 / 0072
            RT0800M7E                        9005 / 028f / 1ff9 / 0086
            RT0800M7H                        9005 / 028f / 1ff9 / 0087
            RT0804M7R                        9005 / 028f / 1ff9 / 0088
            RT0808M7R                        9005 / 028f / 1ff9 / 0089
            RT1608M6R16i                     9005 / 028f / 1ff9 / 00a1

Add new h3c pci_id:
                                             VID  / DID  / SVID / SDID
                                             ----   ----   ----   ----
            UN RAID P4408-Mr-2               9005 / 028f / 193d / 1110

Add new powerleader pci ids:
                                             VID  / DID  / SVID / SDID
                                             ----   ----   ----   ----
            PL SmartROC PM8204               9005 / 028f / 1f3a / 0104

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <David.Strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-2-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 104 ++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 24c7cb285dca0..9166dfa1fedc3 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -9472,6 +9472,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x193d, 0x110b)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x193d, 0x1110)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x193d, 0x8460)
@@ -9588,6 +9592,14 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1bd4, 0x0089)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x00a1)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1f3a, 0x0104)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x19e5, 0xd227)
@@ -10180,6 +10192,98 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1137, 0x02fa)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0045)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0046)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0047)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0048)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x004a)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x004b)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x004c)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x004f)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0051)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0052)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0053)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0054)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x006b)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x006c)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x006d)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x006f)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0070)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0071)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0072)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0086)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0087)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0088)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x0089)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 				0x1e93, 0x1000)
-- 
2.43.0

[PATCH AUTOSEL 6.10 127/197] HID: Ignore battery for all ELAN I2C-HID devices

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bcc31692a1d1e21f0d06c5f727c03ee299d2264e ]

Before this change there were 16 vid:pid based quirks to ignore the battery
reported by Elan I2C-HID touchscreens on various Asus and HP laptops.

And a report has been received that the 04F3:2A00 I2C touchscreen on
the HP ProBook x360 11 G5 EE/86CF also reports a non present battery.

Since I2C-HID devices are always builtin to laptops they are not battery
owered so it should be safe to just ignore the battery on all Elan I2C-HID
devices, rather then adding a 17th quirk for the 04F3:2A00 touchscreen.

As reported in the changelog of commit a3a5a37efba1 ("HID: Ignore battery
for ELAN touchscreens 2F2C and 4116"), which added 2 new Elan touchscreen
quirks about a month ago, the HID reported battery seems to be related
to a stylus being used. But even when a stylus is in use it does not
properly report the charge of the stylus battery, instead the reported
battery charge jumps from 0% to 1%. So it is best to just ignore the
HID battery.

Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2302776
Cc: Louis Dalibard <ontake@ontake.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h   | 16 ----------------
 drivers/hid/hid-input.c | 37 +++++--------------------------------
 2 files changed, 5 insertions(+), 48 deletions(-)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 72d56ee7ce1b9..72936a523c543 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -416,24 +416,8 @@
 #define USB_DEVICE_ID_TOSHIBA_CLICK_L9W	0x0401
 #define USB_DEVICE_ID_HP_X2		0x074d
 #define USB_DEVICE_ID_HP_X2_10_COVER	0x0755
-#define I2C_DEVICE_ID_HP_ENVY_X360_15	0x2d05
-#define I2C_DEVICE_ID_HP_ENVY_X360_15T_DR100	0x29CF
-#define I2C_DEVICE_ID_HP_ENVY_X360_EU0009NV	0x2CF9
-#define I2C_DEVICE_ID_HP_SPECTRE_X360_15	0x2817
-#define I2C_DEVICE_ID_HP_SPECTRE_X360_13_AW0020NG  0x29DF
-#define I2C_DEVICE_ID_ASUS_TP420IA_TOUCHSCREEN 0x2BC8
-#define I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN 0x2C82
-#define I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN 0x2F2C
-#define I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN 0x4116
 #define USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN	0x2544
 #define USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN	0x2706
-#define I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN	0x261A
-#define I2C_DEVICE_ID_SURFACE_GO2_TOUCHSCREEN	0x2A1C
-#define I2C_DEVICE_ID_LENOVO_YOGA_C630_TOUCHSCREEN	0x279F
-#define I2C_DEVICE_ID_HP_SPECTRE_X360_13T_AW100	0x29F5
-#define I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V1	0x2BED
-#define I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V2	0x2BEE
-#define I2C_DEVICE_ID_HP_ENVY_X360_15_EU0556NG		0x2D02
 #define I2C_DEVICE_ID_CHROMEBOOK_TROGDOR_POMPOM	0x2F81
 
 #define USB_VENDOR_ID_ELECOM		0x056e
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index c9094a4f281e9..fda9dce3da998 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -373,14 +373,6 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_DINOVO_EDGE_KBD),
 	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_TP420IA_TOUCHSCREEN),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN),
-	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN),
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN),
@@ -391,32 +383,13 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE, USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO_PRO_SW),
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15T_DR100),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_EU0009NV),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_15),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_13_AW0020NG),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_SURFACE_GO2_TOUCHSCREEN),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_LENOVO_YOGA_C630_TOUCHSCREEN),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_13T_AW100),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V1),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_SPECTRE_X360_14T_EA100_V2),
-	  HID_BATTERY_QUIRK_IGNORE },
-	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_HP_ENVY_X360_15_EU0556NG),
-	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_CHROMEBOOK_TROGDOR_POMPOM),
 	  HID_BATTERY_QUIRK_AVOID_QUERY },
+	/*
+	 * Elan I2C-HID touchscreens seem to all report a non present battery,
+	 * set HID_BATTERY_QUIRK_IGNORE for all Elan I2C-HID devices.
+	 */
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, HID_ANY_ID), HID_BATTERY_QUIRK_IGNORE },
 	{}
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 128/197] drm/amd/display: Handle null 'stream_status' in 'planes_changed_for_existing_stream'

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 8141f21b941710ecebe49220b69822cab3abd23d ]

This commit adds a null check for 'stream_status' in the function
'planes_changed_for_existing_stream'. Previously, the code assumed
'stream_status' could be null, but did not handle the case where it was
actually null. This could lead to a null pointer dereference.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index 786b56e96a816..7462c34793799 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -3662,8 +3662,10 @@ static bool planes_changed_for_existing_stream(struct dc_state *context,
 		}
 	}
 
-	if (!stream_status)
+	if (!stream_status) {
 		ASSERT(0);
+		return false;
+	}
 
 	for (i = 0; i < set_count; i++)
 		if (set[i].stream == stream)
-- 
2.43.0

[PATCH AUTOSEL 6.10 129/197] drm/amd/display: Add NULL check for function pointer in dcn20_set_output_transfer_func

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 62ed6f0f198da04e884062264df308277628004f ]

This commit adds a null check for the set_output_gamma function pointer
in the dcn20_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null at line 1030, but then it
was being dereferenced without any null check at line 1048. This could
potentially lead to a null pointer dereference error if set_output_gamma
is null.

To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma at line 1048.

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
index 7d833fa6dd77c..58e8b7482f4f5 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
@@ -1040,7 +1040,8 @@ bool dcn20_set_output_transfer_func(struct dc *dc, struct pipe_ctx *pipe_ctx,
 	/*
 	 * if above if is not executed then 'params' equal to 0 and set in bypass
 	 */
-	mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
+	if (mpc->funcs->set_output_gamma)
+		mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
 
 	return true;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 130/197] drm/amd/display: Add NULL check for function pointer in dcn32_set_output_transfer_func

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit 28574b08c70e56d34d6f6379326a860b96749051 ]

This commit adds a null check for the set_output_gamma function pointer
in the dcn32_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null, but then it was being
dereferenced without any null check. This could lead to a null pointer
dereference if set_output_gamma is null.

To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma.

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
index 8759c14a63226..de272a1ab2630 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c
@@ -581,7 +581,9 @@ bool dcn32_set_output_transfer_func(struct dc *dc,
 		}
 	}
 
-	mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
+	if (mpc->funcs->set_output_gamma)
+		mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
+
 	return ret;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 131/197] drm/amd/display: Check null pointers before using dc->clk_mgr

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 95d9e0803e51d5a24276b7643b244c7477daf463 ]

[WHY & HOW]
dc->clk_mgr is null checked previously in the same function, indicating
it might be null.

Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which
dereferences null "dc->clk_mgr". (The function pointer resolves to
"dcn35_apply_idle_power_optimizations".)

This fixes 1 FORWARD_NULL issue reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 3bd18e862945f..daeb80abf435f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -5211,7 +5211,8 @@ void dc_allow_idle_optimizations_internal(struct dc *dc, bool allow, char const
 	if (allow == dc->idle_optimizations_allowed)
 		return;
 
-	if (dc->hwss.apply_idle_power_optimizations && dc->hwss.apply_idle_power_optimizations(dc, allow))
+	if (dc->hwss.apply_idle_power_optimizations && dc->clk_mgr != NULL &&
+	    dc->hwss.apply_idle_power_optimizations(dc, allow))
 		dc->idle_optimizations_allowed = allow;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 132/197] drm/amd/display: Add null check for 'afb' in amdgpu_dm_plane_handle_cursor_update (v2)

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit cd9e9e0852d501f169aa3bb34e4b413d2eb48c37 ]

This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.

Changes since v1:
- Moved the null check for 'afb' to the line where 'afb' is used. (Alex)

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Co-developed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
index 7d47acdd11d55..fe7a99aee47dd 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_plane.c
@@ -1285,7 +1285,8 @@ void amdgpu_dm_plane_handle_cursor_update(struct drm_plane *plane,
 	    adev->dm.dc->caps.color.dpp.gamma_corr)
 		attributes.attribute_flags.bits.ENABLE_CURSOR_DEGAMMA = 1;
 
-	attributes.pitch = afb->base.pitches[0] / afb->base.format->cpp[0];
+	if (afb)
+		attributes.pitch = afb->base.pitches[0] / afb->base.format->cpp[0];
 
 	if (crtc_state->stream) {
 		mutex_lock(&adev->dm.dc_lock);
-- 
2.43.0

[PATCH AUTOSEL 6.10 133/197] drm/amd/display: fix double free issue during amdgpu module unload

[Sasha Levin]

From: Tim Huang <tim.huang@amd.com>

[ Upstream commit 20b5a8f9f4670a8503aa9fa95ca632e77c6bf55d ]

Flexible endpoints use DIGs from available inflexible endpoints,
so only the encoders of inflexible links need to be freed.
Otherwise, a double free issue may occur when unloading the
amdgpu module.

[  279.190523] RIP: 0010:__slab_free+0x152/0x2f0
[  279.190577] Call Trace:
[  279.190580]  <TASK>
[  279.190582]  ? show_regs+0x69/0x80
[  279.190590]  ? die+0x3b/0x90
[  279.190595]  ? do_trap+0xc8/0xe0
[  279.190601]  ? do_error_trap+0x73/0xa0
[  279.190605]  ? __slab_free+0x152/0x2f0
[  279.190609]  ? exc_invalid_op+0x56/0x70
[  279.190616]  ? __slab_free+0x152/0x2f0
[  279.190642]  ? asm_exc_invalid_op+0x1f/0x30
[  279.190648]  ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu]
[  279.191096]  ? __slab_free+0x152/0x2f0
[  279.191102]  ? dcn10_link_encoder_destroy+0x19/0x30 [amdgpu]
[  279.191469]  kfree+0x260/0x2b0
[  279.191474]  dcn10_link_encoder_destroy+0x19/0x30 [amdgpu]
[  279.191821]  link_destroy+0xd7/0x130 [amdgpu]
[  279.192248]  dc_destruct+0x90/0x270 [amdgpu]
[  279.192666]  dc_destroy+0x19/0x40 [amdgpu]
[  279.193020]  amdgpu_dm_fini+0x16e/0x200 [amdgpu]
[  279.193432]  dm_hw_fini+0x26/0x40 [amdgpu]
[  279.193795]  amdgpu_device_fini_hw+0x24c/0x400 [amdgpu]
[  279.194108]  amdgpu_driver_unload_kms+0x4f/0x70 [amdgpu]
[  279.194436]  amdgpu_pci_remove+0x40/0x80 [amdgpu]
[  279.194632]  pci_device_remove+0x3a/0xa0
[  279.194638]  device_remove+0x40/0x70
[  279.194642]  device_release_driver_internal+0x1ad/0x210
[  279.194647]  driver_detach+0x4e/0xa0
[  279.194650]  bus_remove_driver+0x6f/0xf0
[  279.194653]  driver_unregister+0x33/0x60
[  279.194657]  pci_unregister_driver+0x44/0x90
[  279.194662]  amdgpu_exit+0x19/0x1f0 [amdgpu]
[  279.194939]  __do_sys_delete_module.isra.0+0x198/0x2f0
[  279.194946]  __x64_sys_delete_module+0x16/0x20
[  279.194950]  do_syscall_64+0x58/0x120
[  279.194954]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  279.194980]  </TASK>

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/link/link_factory.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/link_factory.c b/drivers/gpu/drm/amd/display/dc/link/link_factory.c
index 72df9bdfb23ff..608491f860b29 100644
--- a/drivers/gpu/drm/amd/display/dc/link/link_factory.c
+++ b/drivers/gpu/drm/amd/display/dc/link/link_factory.c
@@ -385,7 +385,7 @@ static void link_destruct(struct dc_link *link)
 	if (link->panel_cntl)
 		link->panel_cntl->funcs->destroy(&link->panel_cntl);
 
-	if (link->link_enc) {
+	if (link->link_enc && !link->is_dig_mapping_flexible) {
 		/* Update link encoder resource tracking variables. These are used for
 		 * the dynamic assignment of link encoders to streams. Virtual links
 		 * are not assigned encoder resources on creation.
-- 
2.43.0

[PATCH AUTOSEL 6.10 134/197] drm/amdgpu: add list empty check to avoid null pointer issue

[Sasha Levin]

From: Yang Wang <kevinyang.wang@amd.com>

[ Upstream commit 4416377ae1fdc41a90b665943152ccd7ff61d3c5 ]

Add list empty check to avoid null pointer issues in some corner cases.
- list_for_each_entry_safe()

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c
index 9baee7c246b6d..a513819b72311 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c
@@ -80,6 +80,9 @@ static void aca_banks_release(struct aca_banks *banks)
 {
 	struct aca_bank_node *node, *tmp;
 
+	if (list_empty(&banks->list))
+		return;
+
 	list_for_each_entry_safe(node, tmp, &banks->list, node) {
 		list_del(&node->node);
 		kvfree(node);
@@ -562,9 +565,13 @@ static void aca_error_fini(struct aca_error *aerr)
 	struct aca_bank_error *bank_error, *tmp;
 
 	mutex_lock(&aerr->lock);
+	if (list_empty(&aerr->list))
+		goto out_unlock;
+
 	list_for_each_entry_safe(bank_error, tmp, &aerr->list, node)
 		aca_bank_error_remove(aerr, bank_error);
 
+out_unlock:
 	mutex_destroy(&aerr->lock);
 }
 
@@ -680,6 +687,9 @@ static void aca_manager_fini(struct aca_handle_manager *mgr)
 {
 	struct aca_handle *handle, *tmp;
 
+	if (list_empty(&mgr->list))
+		return;
+
 	list_for_each_entry_safe(handle, tmp, &mgr->list, node)
 		amdgpu_aca_remove_handle(handle);
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 135/197] jfs: UBSAN: shift-out-of-bounds in dbFindBits

[Sasha Levin]

From: Remington Brasga <rbrasga@uci.edu>

[ Upstream commit b0b2fc815e514221f01384f39fbfbff65d897e1c ]

Fix issue with UBSAN throwing shift-out-of-bounds warning.

Reported-by: syzbot+e38d703eeb410b17b473@syzkaller.appspotmail.com
Signed-off-by: Remington Brasga <rbrasga@uci.edu>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_dmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 5713994328cbc..ccdfa38d7a682 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -3022,7 +3022,7 @@ static int dbFindBits(u32 word, int l2nb)
 
 	/* scan the word for nb free bits at nb alignments.
 	 */
-	for (bitno = 0; mask != 0; bitno += nb, mask >>= nb) {
+	for (bitno = 0; mask != 0; bitno += nb, mask = (mask >> nb)) {
 		if ((mask & word) == mask)
 			break;
 	}
-- 
2.43.0

[PATCH AUTOSEL 6.10 136/197] jfs: Fix uaf in dbFreeBits

[Sasha Levin]

From: Edward Adam Davis <eadavis@qq.com>

[ Upstream commit d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234 ]

[syzbot reported]
==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752
Read of size 8 at addr ffff8880229254b0 by task syz-executor357/5216

CPU: 0 UID: 0 PID: 5216 Comm: syz-executor357 Not tainted 6.11.0-rc3-syzkaller-00156-gd7a5aa4b3c00 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:93 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0x169/0x550 mm/kasan/report.c:488
 kasan_report+0x143/0x180 mm/kasan/report.c:601
 __mutex_lock_common kernel/locking/mutex.c:587 [inline]
 __mutex_lock+0xfe/0xd70 kernel/locking/mutex.c:752
 dbFreeBits+0x7ea/0xd90 fs/jfs/jfs_dmap.c:2390
 dbFreeDmap fs/jfs/jfs_dmap.c:2089 [inline]
 dbFree+0x35b/0x680 fs/jfs/jfs_dmap.c:409
 dbDiscardAG+0x8a9/0xa20 fs/jfs/jfs_dmap.c:1650
 jfs_ioc_trim+0x433/0x670 fs/jfs/jfs_discard.c:100
 jfs_ioctl+0x2d0/0x3e0 fs/jfs/ioctl.c:131
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:907 [inline]
 __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83

Freed by task 5218:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579
 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240
 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256
 kasan_slab_free include/linux/kasan.h:184 [inline]
 slab_free_hook mm/slub.c:2252 [inline]
 slab_free mm/slub.c:4473 [inline]
 kfree+0x149/0x360 mm/slub.c:4594
 dbUnmount+0x11d/0x190 fs/jfs/jfs_dmap.c:278
 jfs_mount_rw+0x4ac/0x6a0 fs/jfs/jfs_mount.c:247
 jfs_remount+0x3d1/0x6b0 fs/jfs/super.c:454
 reconfigure_super+0x445/0x880 fs/super.c:1083
 vfs_cmd_reconfigure fs/fsopen.c:263 [inline]
 vfs_fsconfig_locked fs/fsopen.c:292 [inline]
 __do_sys_fsconfig fs/fsopen.c:473 [inline]
 __se_sys_fsconfig+0xb6e/0xf80 fs/fsopen.c:345
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

[Analysis]
There are two paths (dbUnmount and jfs_ioc_trim) that generate race
condition when accessing bmap, which leads to the occurrence of uaf.

Use the lock s_umount to synchronize them, in order to avoid uaf caused
by race condition.

Reported-and-tested-by: syzbot+3c010e21296f33a5dc16@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_discard.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/jfs/jfs_discard.c b/fs/jfs/jfs_discard.c
index 575cb2ba74fc8..5f4b305030ad5 100644
--- a/fs/jfs/jfs_discard.c
+++ b/fs/jfs/jfs_discard.c
@@ -65,7 +65,7 @@ void jfs_issue_discard(struct inode *ip, u64 blkno, u64 nblocks)
 int jfs_ioc_trim(struct inode *ip, struct fstrim_range *range)
 {
 	struct inode *ipbmap = JFS_SBI(ip->i_sb)->ipbmap;
-	struct bmap *bmp = JFS_SBI(ip->i_sb)->bmap;
+	struct bmap *bmp;
 	struct super_block *sb = ipbmap->i_sb;
 	int agno, agno_end;
 	u64 start, end, minlen;
@@ -83,10 +83,15 @@ int jfs_ioc_trim(struct inode *ip, struct fstrim_range *range)
 	if (minlen == 0)
 		minlen = 1;
 
+	down_read(&sb->s_umount);
+	bmp = JFS_SBI(ip->i_sb)->bmap;
+
 	if (minlen > bmp->db_agsize ||
 	    start >= bmp->db_mapsize ||
-	    range->len < sb->s_blocksize)
+	    range->len < sb->s_blocksize) {
+		up_read(&sb->s_umount);
 		return -EINVAL;
+	}
 
 	if (end >= bmp->db_mapsize)
 		end = bmp->db_mapsize - 1;
@@ -100,6 +105,8 @@ int jfs_ioc_trim(struct inode *ip, struct fstrim_range *range)
 		trimmed += dbDiscardAG(ip, agno, minlen);
 		agno++;
 	}
+
+	up_read(&sb->s_umount);
 	range->len = trimmed << sb->s_blocksize_bits;
 
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 6.10 137/197] jfs: check if leafidx greater than num leaves per dmap tree

[Sasha Levin]

From: Edward Adam Davis <eadavis@qq.com>

[ Upstream commit d64ff0d2306713ff084d4b09f84ed1a8c75ecc32 ]

syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater
than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf.

Shaggy:
Modified sanity check to apply to control pages as well as leaf pages.

Reported-and-tested-by: syzbot+dca05492eff41f604890@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dca05492eff41f604890
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_dmap.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index ccdfa38d7a682..53904e06d843b 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -2944,9 +2944,10 @@ static void dbAdjTree(dmtree_t *tp, int leafno, int newval, bool is_ctl)
 static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl)
 {
 	int ti, n = 0, k, x = 0;
-	int max_size;
+	int max_size, max_idx;
 
 	max_size = is_ctl ? CTLTREESIZE : TREESIZE;
+	max_idx = is_ctl ? LPERCTL : LPERDMAP;
 
 	/* first check the root of the tree to see if there is
 	 * sufficient free space.
@@ -2978,6 +2979,8 @@ static int dbFindLeaf(dmtree_t *tp, int l2nb, int *leafidx, bool is_ctl)
 		 */
 		assert(n < 4);
 	}
+	if (le32_to_cpu(tp->dmt_leafidx) >= max_idx)
+		return -ENOSPC;
 
 	/* set the return to the leftmost leaf describing sufficient
 	 * free space.
-- 
2.43.0

[PATCH AUTOSEL 6.10 138/197] scsi: smartpqi: correct stream detection

[Sasha Levin]

From: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>

[ Upstream commit 4c76114932d1d6fad2e72823e7898a3c960cf2a7 ]

Correct stream detection by initializing the structure
pqi_scsi_dev_raid_map_data to 0s.

When the OS issues SCSI READ commands, the driver erroneously considers
them as SCSI WRITES. If they are identified as sequential IOs, the driver
then submits those requests via the RAID path instead of the AIO path.

The 'is_write' flag might be set for SCSI READ commands also.  The driver
may interpret SCSI READ commands as SCSI WRITE commands, resulting in IOs
being submitted through the RAID path.

Note: This does not cause data corruption.

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 9166dfa1fedc3..f18799afe9de2 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -5933,7 +5933,7 @@ static bool pqi_is_parity_write_stream(struct pqi_ctrl_info *ctrl_info,
 	int rc;
 	struct pqi_scsi_dev *device;
 	struct pqi_stream_data *pqi_stream_data;
-	struct pqi_scsi_dev_raid_map_data rmd;
+	struct pqi_scsi_dev_raid_map_data rmd = { 0 };
 
 	if (!ctrl_info->enable_stream_detection)
 		return false;
-- 
2.43.0

[PATCH AUTOSEL 6.10 139/197] scsi: smartpqi: add new controller PCI IDs

[Sasha Levin]

From: David Strahan <David.Strahan@microchip.com>

[ Upstream commit dbc39b84540f746cc814e69b21e53e6d3e12329a ]

All PCI ID entries in Hex.

Add new cisco pci ids:
                                             VID  / DID  / SVID / SDID
                                             ----   ----   ----   ----
                                             9005   028f   1137   02fe
                                             9005   028f   1137   02ff
                                             9005   028f   1137   0300

Add new h3c pci ids:
                                             VID  / DID  / SVID / SDID
                                             ----   ----   ----   ----
                                             9005   028f   193d   0462
                                             9005   028f   193d   8462

Add new ieit pci ids:
                                             VID  / DID  / SVID / SDID
                                             ----   ----   ----   ----
                                             9005   028f   1ff9   00a3

Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: David Strahan <David.Strahan@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-5-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index f18799afe9de2..5e815e979297f 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -9444,6 +9444,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x152d, 0x8a37)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x193d, 0x0462)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x193d, 0x1104)
@@ -9484,6 +9488,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x193d, 0x8461)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x193d, 0x8462)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x193d, 0xc460)
@@ -10192,6 +10200,18 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1137, 0x02fa)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1137, 0x02fe)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1137, 0x02ff)
+	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1137, 0x0300)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1ff9, 0x0045)
@@ -10368,6 +10388,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       0x1f51, 0x1045)
 	},
+	{
+		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+			       0x1ff9, 0x00a3)
+	},
 	{
 		PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
 			       PCI_ANY_ID, PCI_ANY_ID)
-- 
2.43.0

[PATCH AUTOSEL 6.10 140/197] drm/msm/adreno: Assign msm_gpu->pdev earlier to avoid nullptrs

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@linaro.org>

[ Upstream commit 16007768551d5bfe53426645401435ca8d2ef54f ]

There are some cases, such as the one uncovered by Commit 46d4efcccc68
("drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails")
where

msm_gpu_cleanup() : platform_set_drvdata(gpu->pdev, NULL);

is called on gpu->pdev == NULL, as the GPU device has not been fully
initialized yet.

Turns out that there's more than just the aforementioned path that
causes this to happen (e.g. the case when there's speedbin data in the
catalog, but opp-supported-hw is missing in DT).

Assigning msm_gpu->pdev earlier seems like the least painful solution
to this, therefore do so.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602742/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/adreno_gpu.c | 1 +
 drivers/gpu/drm/msm/msm_gpu.c           | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
index 074fb498706f2..036f024ea2595 100644
--- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
@@ -1079,6 +1079,7 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev,
 	adreno_gpu->chip_id = config->chip_id;
 
 	gpu->allow_relocs = config->info->family < ADRENO_6XX_GEN1;
+	gpu->pdev = pdev;
 
 	/* Only handle the core clock when GMU is not in use (or is absent). */
 	if (adreno_has_gmu_wrapper(adreno_gpu) ||
diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c
index cd185b9636d26..56b6de049bd7b 100644
--- a/drivers/gpu/drm/msm/msm_gpu.c
+++ b/drivers/gpu/drm/msm/msm_gpu.c
@@ -929,7 +929,6 @@ int msm_gpu_init(struct drm_device *drm, struct platform_device *pdev,
 	if (IS_ERR(gpu->gpu_cx))
 		gpu->gpu_cx = NULL;
 
-	gpu->pdev = pdev;
 	platform_set_drvdata(pdev, &gpu->adreno_smmu);
 
 	msm_devfreq_init(gpu);
-- 
2.43.0

[PATCH AUTOSEL 6.10 141/197] jfs: Fix uninit-value access of new_ea in ea_buffer

[Sasha Levin]

From: Zhao Mengmeng <zhaomengmeng@kylinos.cn>

[ Upstream commit 2b59ffad47db1c46af25ccad157bb3b25147c35c ]

syzbot reports that lzo1x_1_do_compress is using uninit-value:

=====================================================
BUG: KMSAN: uninit-value in lzo1x_1_do_compress+0x19f9/0x2510 lib/lzo/lzo1x_compress.c:178

...

Uninit was stored to memory at:
 ea_put fs/jfs/xattr.c:639 [inline]

...

Local variable ea_buf created at:
 __jfs_setxattr+0x5d/0x1ae0 fs/jfs/xattr.c:662
 __jfs_xattr_set+0xe6/0x1f0 fs/jfs/xattr.c:934

=====================================================

The reason is ea_buf->new_ea is not initialized properly.

Fix this by using memset to empty its content at the beginning
in ea_get().

Reported-by: syzbot+02341e0daa42a15ce130@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=02341e0daa42a15ce130
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/xattr.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c
index 2999ed5d83f5e..0fb05e314edf6 100644
--- a/fs/jfs/xattr.c
+++ b/fs/jfs/xattr.c
@@ -434,6 +434,8 @@ static int ea_get(struct inode *inode, struct ea_buffer *ea_buf, int min_size)
 	int rc;
 	int quota_allocation = 0;
 
+	memset(&ea_buf->new_ea, 0, sizeof(ea_buf->new_ea));
+
 	/* When fsck.jfs clears a bad ea, it doesn't clear the size */
 	if (ji->ea.flag == 0)
 		ea_size = 0;
-- 
2.43.0

[PATCH AUTOSEL 6.10 142/197] drm/amdgpu: add raven1 gfxoff quirk

[Sasha Levin]

From: Peng Liu <liupeng01@kylinos.cn>

[ Upstream commit 0126c0ae11e8b52ecfde9d1b174ee2f32d6c3a5d ]

Fix screen corruption with openkylin.

Link: https://bbs.openkylin.top/t/topic/171497
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 3c8c5abf35abd..c86a6363b2c3d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1172,6 +1172,8 @@ static const struct amdgpu_gfxoff_quirk amdgpu_gfxoff_quirk_list[] = {
 	{ 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc6 },
 	/* Apple MacBook Pro (15-inch, 2019) Radeon Pro Vega 20 4 GB */
 	{ 0x1002, 0x69af, 0x106b, 0x019a, 0xc0 },
+	/* https://bbs.openkylin.top/t/topic/171497 */
+	{ 0x1002, 0x15d8, 0x19e5, 0x3e14, 0xc2 },
 	{ 0, 0, 0, 0, 0 },
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 143/197] drm/amdgpu: enable gfxoff quirk on HP 705G4

[Sasha Levin]

From: Peng Liu <liupeng01@kylinos.cn>

[ Upstream commit 2c7795e245d993bcba2f716a8c93a5891ef910c9 ]

Enabling gfxoff quirk results in perfectly usable
graphical user interface on HP 705G4 DM with R5 2400G.

Without the quirk, X server is completely unusable as
every few seconds there is gpu reset due to ring gfx timeout.

Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index c86a6363b2c3d..0594eab666a9b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1174,6 +1174,8 @@ static const struct amdgpu_gfxoff_quirk amdgpu_gfxoff_quirk_list[] = {
 	{ 0x1002, 0x69af, 0x106b, 0x019a, 0xc0 },
 	/* https://bbs.openkylin.top/t/topic/171497 */
 	{ 0x1002, 0x15d8, 0x19e5, 0x3e14, 0xc2 },
+	/* HP 705G4 DM with R5 2400G */
+	{ 0x1002, 0x15dd, 0x103c, 0x8464, 0xd6 },
 	{ 0, 0, 0, 0, 0 },
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 144/197] drm/amdkfd: Fix resource leak in criu restore queue

[Sasha Levin]

From: Jesse Zhang <jesse.zhang@amd.com>

[ Upstream commit aa47fe8d3595365a935921a90d00bc33ee374728 ]

To avoid memory leaks, release q_extra_data when exiting the restore queue.
v2: Correct the proto (Alex)

Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
index c97b4fc44859d..db2b71f7226f4 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c
@@ -984,6 +984,7 @@ int kfd_criu_restore_queue(struct kfd_process *p,
 		pr_debug("Queue id %d was restored successfully\n", queue_id);
 
 	kfree(q_data);
+	kfree(q_extra_data);
 
 	return ret;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 145/197] HID: multitouch: Add support for Thinkpad X12 Gen 2 Kbd Portfolio

[Sasha Levin]

From: Vishnu Sankar <vishnuocv@gmail.com>

[ Upstream commit 65b72ea91a257a5f0cb5a26b01194d3dd4b85298 ]

This applies similar quirks used by previous generation device, so that
Trackpoint and buttons on the touchpad works.  New USB KBD PID 0x61AE for
Thinkpad X12 Tab is added.

Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h        | 1 +
 drivers/hid/hid-multitouch.c | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 72936a523c543..937c1fe518769 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -791,6 +791,7 @@
 #define USB_DEVICE_ID_LENOVO_X1_TAB	0x60a3
 #define USB_DEVICE_ID_LENOVO_X1_TAB3	0x60b5
 #define USB_DEVICE_ID_LENOVO_X12_TAB	0x60fe
+#define USB_DEVICE_ID_LENOVO_X12_TAB2	0x61ae
 #define USB_DEVICE_ID_LENOVO_OPTICAL_USB_MOUSE_600E	0x600e
 #define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_608D	0x608d
 #define USB_DEVICE_ID_LENOVO_PIXART_USB_MOUSE_6019	0x6019
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 56fc78841f245..1b0844ffa6df7 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -2081,6 +2081,12 @@ static const struct hid_device_id mt_devices[] = {
 			   USB_VENDOR_ID_LENOVO,
 			   USB_DEVICE_ID_LENOVO_X12_TAB) },
 
+	/* Lenovo X12 TAB Gen 2 */
+	{ .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU,
+		HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8,
+			   USB_VENDOR_ID_LENOVO,
+			   USB_DEVICE_ID_LENOVO_X12_TAB2) },
+
 	/* Logitech devices */
 	{ .driver_data = MT_CLS_NSMU,
 		HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH_WIN_8,
-- 
2.43.0

[PATCH AUTOSEL 6.10 146/197] platform/x86: touchscreen_dmi: add nanote-next quirk

[Sasha Levin]

From: Ckath <ckath@yandex.ru>

[ Upstream commit c11619af35bae5884029bd14170c3e4b55ddf6f3 ]

Add touschscreen info for the nanote next (UMPC-03-SR).

After checking with multiple owners the DMI info really is this generic.

Signed-off-by: Ckath <ckath@yandex.ru>
Link: https://lore.kernel.org/r/e8dda83a-10ae-42cf-a061-5d29be0d193a@yandex.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index f74af0a689f20..0a39f68c641d1 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -840,6 +840,21 @@ static const struct ts_dmi_data rwc_nanote_p8_data = {
 	.properties = rwc_nanote_p8_props,
 };
 
+static const struct property_entry rwc_nanote_next_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 5),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 5),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1785),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1145),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-rwc-nanote-next.fw"),
+	{ }
+};
+
+static const struct ts_dmi_data rwc_nanote_next_data = {
+	.acpi_name = "MSSL1680:00",
+	.properties = rwc_nanote_next_props,
+};
+
 static const struct property_entry schneider_sct101ctm_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1715),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
@@ -1589,6 +1604,17 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_SKU, "0001")
 		},
 	},
+	{
+		/* RWC NANOTE NEXT */
+		.driver_data = (void *)&rwc_nanote_next_data,
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "To be filled by O.E.M."),
+			DMI_MATCH(DMI_BOARD_NAME, "To be filled by O.E.M."),
+			DMI_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+			/* Above matches are too generic, add bios-version match */
+			DMI_MATCH(DMI_BIOS_VERSION, "S8A70R100-V005"),
+		},
+	},
 	{
 		/* Schneider SCT101CTM */
 		.driver_data = (void *)&schneider_sct101ctm_data,
-- 
2.43.0

[PATCH AUTOSEL 6.10 147/197] platform/x86/amd: pmf: Add quirk for TUF Gaming A14

[Sasha Levin]

From: aln8 <aln8un@gmail.com>

[ Upstream commit 06369503d644068abd9e90918c6611274d94c126 ]

The ASUS TUF Gaming A14 has the same issue as the ROG Zephyrus G14
where it advertises SPS support but doesn't use it.

Signed-off-by: aln8 <aln8un@gmail.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240912073601.65656-1-aln8un@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/amd/pmf/pmf-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/platform/x86/amd/pmf/pmf-quirks.c b/drivers/platform/x86/amd/pmf/pmf-quirks.c
index 460444cda1b29..6ee219a81537d 100644
--- a/drivers/platform/x86/amd/pmf/pmf-quirks.c
+++ b/drivers/platform/x86/amd/pmf/pmf-quirks.c
@@ -37,6 +37,14 @@ static const struct dmi_system_id fwbug_list[] = {
 		},
 		.driver_data = &quirk_no_sps_bug,
 	},
+	{
+		.ident = "ASUS TUF Gaming A14",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "FA401W"),
+		},
+		.driver_data = &quirk_no_sps_bug,
+	},
 	{}
 };
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 148/197] drm/stm: ltdc: reset plane transparency after plane disable

[Sasha Levin]

From: Yannick Fertre <yannick.fertre@foss.st.com>

[ Upstream commit 02fa62d41c8abff945bae5bfc3ddcf4721496aca ]

The plane's opacity should be reseted while the plane
is disabled. It prevents from seeing a possible global
or layer background color set earlier.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240712131344.98113-1-yannick.fertre@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/stm/ltdc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index eeaabb4e10d3e..9e76785cb2691 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -1513,6 +1513,9 @@ static void ltdc_plane_atomic_disable(struct drm_plane *plane,
 	/* Disable layer */
 	regmap_write_bits(ldev->regmap, LTDC_L1CR + lofs, LXCR_LEN | LXCR_CLUTEN |  LXCR_HMEN, 0);
 
+	/* Reset the layer transparency to hide any related background color */
+	regmap_write_bits(ldev->regmap, LTDC_L1CACR + lofs, LXCACR_CONSTA, 0x00);
+
 	/* Commit shadow registers = update plane at next vblank */
 	if (ldev->caps.plane_reg_shadow)
 		regmap_write_bits(ldev->regmap, LTDC_L1RCR + lofs,
-- 
2.43.0

[PATCH AUTOSEL 6.10 149/197] drm/amd/display: Check null-initialized variables

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 367cd9ceba1933b63bc1d87d967baf6d9fd241d2 ]

[WHAT & HOW]
drr_timing and subvp_pipe are initialized to null and they are not
always assigned new values. It is necessary to check for null before
dereferencing.

This fixes 2 FORWARD_NULL issues reported by Coverity.

Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index ebcf5ece209a4..bf8c89fe95a7e 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -871,8 +871,9 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context)
 	 * for VBLANK: (VACTIVE region of the SubVP pipe can fit the MALL prefetch, VBLANK frame time,
 	 * and the max of (VBLANK blanking time, MALL region)).
 	 */
-	if (stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 &&
-			subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0)
+	if (drr_timing &&
+	    stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 &&
+	    subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0)
 		schedulable = true;
 
 	return schedulable;
@@ -937,7 +938,7 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context)
 		if (!subvp_pipe && pipe_mall_type == SUBVP_MAIN)
 			subvp_pipe = pipe;
 	}
-	if (found) {
+	if (found && subvp_pipe) {
 		phantom_stream = dc_state_get_paired_subvp_stream(context, subvp_pipe->stream);
 		main_timing = &subvp_pipe->stream->timing;
 		phantom_timing = &phantom_stream->timing;
-- 
2.43.0

[PATCH AUTOSEL 6.10 150/197] drm/amd/display: Check phantom_stream before it is used

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 3718a619a8c0a53152e76bb6769b6c414e1e83f4 ]

dcn32_enable_phantom_stream can return null, so returned value
must be checked before used.

This fixes 1 NULL_RETURNS issue reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c
index 9209bcad699a8..55fbe86383c04 100644
--- a/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c
@@ -1714,6 +1714,9 @@ void dcn32_add_phantom_pipes(struct dc *dc, struct dc_state *context,
 	// be a valid candidate for SubVP (i.e. has a plane, stream, doesn't
 	// already have phantom pipe assigned, etc.) by previous checks.
 	phantom_stream = dcn32_enable_phantom_stream(dc, context, pipes, pipe_cnt, index);
+	if (!phantom_stream)
+		return;
+
 	dcn32_enable_phantom_plane(dc, context, phantom_stream, index);
 
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 151/197] drm/amd/display: Check stream before comparing them

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 35ff747c86767937ee1e0ca987545b7eed7a0810 ]

[WHAT & HOW]
amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is
necessary to check for null before dereferencing them.

This fixes 1 FORWARD_NULL issue reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index 7462c34793799..58f6155fecc5a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -3134,6 +3134,8 @@ static bool are_stream_backends_same(
 bool dc_is_stream_unchanged(
 	struct dc_stream_state *old_stream, struct dc_stream_state *stream)
 {
+	if (!old_stream || !stream)
+		return false;
 
 	if (!are_stream_backends_same(old_stream, stream))
 		return false;
-- 
2.43.0

[PATCH AUTOSEL 6.10 152/197] drm/amd/display: Check link_res->hpo_dp_link_enc before using it

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 0beca868cde8742240cd0038141c30482d2b7eb8 ]

[WHAT & HOW]
Functions dp_enable_link_phy and dp_disable_link_phy can pass link_res
without initializing hpo_dp_link_enc and it is necessary to check for
null before dereferencing.

This fixes 2 FORWARD_NULL issues reported by Coverity.

Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_dp.c    | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_dp.c b/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_dp.c
index e1257404357b1..d0148f10dfc0a 100644
--- a/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/link/hwss/link_hwss_hpo_dp.c
@@ -28,6 +28,8 @@
 #include "dccg.h"
 #include "clk_mgr.h"
 
+#define DC_LOGGER link->ctx->logger
+
 void set_hpo_dp_throttled_vcp_size(struct pipe_ctx *pipe_ctx,
 		struct fixed31_32 throttled_vcp_size)
 {
@@ -124,6 +126,11 @@ void disable_hpo_dp_link_output(struct dc_link *link,
 		const struct link_resource *link_res,
 		enum signal_type signal)
 {
+	if (!link_res->hpo_dp_link_enc) {
+		DC_LOG_ERROR("%s: invalid hpo_dp_link_enc\n", __func__);
+		return;
+	}
+
 		link_res->hpo_dp_link_enc->funcs->link_disable(link_res->hpo_dp_link_enc);
 		link_res->hpo_dp_link_enc->funcs->disable_link_phy(
 				link_res->hpo_dp_link_enc, signal);
-- 
2.43.0

[PATCH AUTOSEL 6.10 153/197] drm/amd/display: Fix index out of bounds in DCN30 degamma hardware format translation

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit bc50b614d59990747dd5aeced9ec22f9258991ff ]

This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30
color  management module. The issue could occur when the index 'i'
exceeds the  number of transfer function points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
index b8327237ed441..edc77615d0973 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
@@ -335,6 +335,8 @@ bool cm3_helper_translate_curve_to_degamma_hw_format(
 				i += increment) {
 			if (j == hw_points - 1)
 				break;
+			if (i >= TRANSFER_FUNC_POINTS)
+				return false;
 			rgb_resulted[j].red = output_tf->tf_pts.red[i];
 			rgb_resulted[j].green = output_tf->tf_pts.green[i];
 			rgb_resulted[j].blue = output_tf->tf_pts.blue[i];
-- 
2.43.0

[PATCH AUTOSEL 6.10 154/197] drm/amd/display: Fix index out of bounds in degamma hardware format translation

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit b7e99058eb2e86aabd7a10761e76cae33d22b49f ]

Fixes index out of bounds issue in
`cm_helper_translate_curve_to_degamma_hw_format` function. The issue
could occur when the index 'i' exceeds the number of transfer function
points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds the function returns
false to indicate an error.

Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
index 0b49362f71b06..eaed5d1c398aa 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
@@ -591,6 +591,8 @@ bool cm_helper_translate_curve_to_degamma_hw_format(
 				i += increment) {
 			if (j == hw_points - 1)
 				break;
+			if (i >= TRANSFER_FUNC_POINTS)
+				return false;
 			rgb_resulted[j].red = output_tf->tf_pts.red[i];
 			rgb_resulted[j].green = output_tf->tf_pts.green[i];
 			rgb_resulted[j].blue = output_tf->tf_pts.blue[i];
-- 
2.43.0

[PATCH AUTOSEL 6.10 155/197] drm/amd/display: Fix index out of bounds in DCN30 color transformation

[Sasha Levin]

From: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>

[ Upstream commit d81873f9e715b72d4f8d391c8eb243946f784dfc ]

This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_hw_format` function in the DCN30 color
management module. The issue could occur when the index 'i' exceeds the
number of transfer function points (TRANSFER_FUNC_POINTS).

The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max

Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
index edc77615d0973..0433f6b5dac78 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_cm_common.c
@@ -177,6 +177,8 @@ bool cm3_helper_translate_curve_to_hw_format(
 				i += increment) {
 			if (j == hw_points)
 				break;
+			if (i >= TRANSFER_FUNC_POINTS)
+				return false;
 			rgb_resulted[j].red = output_tf->tf_pts.red[i];
 			rgb_resulted[j].green = output_tf->tf_pts.green[i];
 			rgb_resulted[j].blue = output_tf->tf_pts.blue[i];
-- 
2.43.0

[PATCH AUTOSEL 6.10 156/197] drm/amdgpu/gfx9: properly handle error ints on all pipes

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 48695573d2feaf42812c1ad54e01caff0d1c2d71 ]

Need to handle the interrupt enables for all pipes.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c   | 44 +++++++++++++++++++++-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c | 50 +++++++++++++++++++++++--
 2 files changed, 89 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 0594eab666a9b..b278453cad6d4 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2477,7 +2477,7 @@ static void gfx_v9_0_enable_gui_idle_interrupt(struct amdgpu_device *adev,
 	tmp = REG_SET_FIELD(tmp, CP_INT_CNTL_RING0, CNTX_BUSY_INT_ENABLE, enable ? 1 : 0);
 	tmp = REG_SET_FIELD(tmp, CP_INT_CNTL_RING0, CNTX_EMPTY_INT_ENABLE, enable ? 1 : 0);
 	tmp = REG_SET_FIELD(tmp, CP_INT_CNTL_RING0, CMP_BUSY_INT_ENABLE, enable ? 1 : 0);
-	if(adev->gfx.num_gfx_rings)
+	if (adev->gfx.num_gfx_rings)
 		tmp = REG_SET_FIELD(tmp, CP_INT_CNTL_RING0, GFX_IDLE_INT_ENABLE, enable ? 1 : 0);
 
 	WREG32_SOC15(GC, 0, mmCP_INT_CNTL_RING0, tmp);
@@ -5772,17 +5772,59 @@ static void gfx_v9_0_set_compute_eop_interrupt_state(struct amdgpu_device *adev,
 	}
 }
 
+static u32 gfx_v9_0_get_cpc_int_cntl(struct amdgpu_device *adev,
+				     int me, int pipe)
+{
+	/*
+	 * amdgpu controls only the first MEC. That's why this function only
+	 * handles the setting of interrupts for this specific MEC. All other
+	 * pipes' interrupts are set by amdkfd.
+	 */
+	if (me != 1)
+		return 0;
+
+	switch (pipe) {
+	case 0:
+		return SOC15_REG_OFFSET(GC, 0, mmCP_ME1_PIPE0_INT_CNTL);
+	case 1:
+		return SOC15_REG_OFFSET(GC, 0, mmCP_ME1_PIPE1_INT_CNTL);
+	case 2:
+		return SOC15_REG_OFFSET(GC, 0, mmCP_ME1_PIPE2_INT_CNTL);
+	case 3:
+		return SOC15_REG_OFFSET(GC, 0, mmCP_ME1_PIPE3_INT_CNTL);
+	default:
+		return 0;
+	}
+}
+
 static int gfx_v9_0_set_priv_reg_fault_state(struct amdgpu_device *adev,
 					     struct amdgpu_irq_src *source,
 					     unsigned type,
 					     enum amdgpu_interrupt_state state)
 {
+	u32 cp_int_cntl_reg, cp_int_cntl;
+	int i, j;
+
 	switch (state) {
 	case AMDGPU_IRQ_STATE_DISABLE:
 	case AMDGPU_IRQ_STATE_ENABLE:
 		WREG32_FIELD15(GC, 0, CP_INT_CNTL_RING0,
 			       PRIV_REG_INT_ENABLE,
 			       state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0);
+		for (i = 0; i < adev->gfx.mec.num_mec; i++) {
+			for (j = 0; j < adev->gfx.mec.num_pipe_per_mec; j++) {
+				/* MECs start at 1 */
+				cp_int_cntl_reg = gfx_v9_0_get_cpc_int_cntl(adev, i + 1, j);
+
+				if (cp_int_cntl_reg) {
+					cp_int_cntl = RREG32_SOC15_IP(GC, cp_int_cntl_reg);
+					cp_int_cntl = REG_SET_FIELD(cp_int_cntl, CP_ME1_PIPE0_INT_CNTL,
+								    PRIV_REG_INT_ENABLE,
+								    state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0);
+					WREG32_SOC15_IP(GC, cp_int_cntl_reg, cp_int_cntl);
+				}
+			}
+		}
 		break;
 	default:
 		break;
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
index f5b9f443cfdd7..2564a003526ae 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_4_3.c
@@ -2824,21 +2824,63 @@ static void gfx_v9_4_3_xcc_set_compute_eop_interrupt_state(
 	}
 }
 
+static u32 gfx_v9_4_3_get_cpc_int_cntl(struct amdgpu_device *adev,
+				     int xcc_id, int me, int pipe)
+{
+	/*
+	 * amdgpu controls only the first MEC. That's why this function only
+	 * handles the setting of interrupts for this specific MEC. All other
+	 * pipes' interrupts are set by amdkfd.
+	 */
+	if (me != 1)
+		return 0;
+
+	switch (pipe) {
+	case 0:
+		return SOC15_REG_OFFSET(GC, GET_INST(GC, xcc_id), regCP_ME1_PIPE0_INT_CNTL);
+	case 1:
+		return SOC15_REG_OFFSET(GC, GET_INST(GC, xcc_id), regCP_ME1_PIPE1_INT_CNTL);
+	case 2:
+		return SOC15_REG_OFFSET(GC, GET_INST(GC, xcc_id), regCP_ME1_PIPE2_INT_CNTL);
+	case 3:
+		return SOC15_REG_OFFSET(GC, GET_INST(GC, xcc_id), regCP_ME1_PIPE3_INT_CNTL);
+	default:
+		return 0;
+	}
+}
+
 static int gfx_v9_4_3_set_priv_reg_fault_state(struct amdgpu_device *adev,
 					     struct amdgpu_irq_src *source,
 					     unsigned type,
 					     enum amdgpu_interrupt_state state)
 {
-	int i, num_xcc;
+	u32 mec_int_cntl_reg, mec_int_cntl;
+	int i, j, k, num_xcc;
 
 	num_xcc = NUM_XCC(adev->gfx.xcc_mask);
 	switch (state) {
 	case AMDGPU_IRQ_STATE_DISABLE:
 	case AMDGPU_IRQ_STATE_ENABLE:
-		for (i = 0; i < num_xcc; i++)
+		for (i = 0; i < num_xcc; i++) {
 			WREG32_FIELD15_PREREG(GC, GET_INST(GC, i), CP_INT_CNTL_RING0,
-				PRIV_REG_INT_ENABLE,
-				state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0);
+					      PRIV_REG_INT_ENABLE,
+					      state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0);
+			for (j = 0; j < adev->gfx.mec.num_mec; j++) {
+				for (k = 0; k < adev->gfx.mec.num_pipe_per_mec; k++) {
+					/* MECs start at 1 */
+					mec_int_cntl_reg = gfx_v9_4_3_get_cpc_int_cntl(adev, i, j + 1, k);
+
+					if (mec_int_cntl_reg) {
+						mec_int_cntl = RREG32_XCC(mec_int_cntl_reg, i);
+						mec_int_cntl = REG_SET_FIELD(mec_int_cntl, CP_ME1_PIPE0_INT_CNTL,
+									     PRIV_REG_INT_ENABLE,
+									     state == AMDGPU_IRQ_STATE_ENABLE ?
+									     1 : 0);
+						WREG32_XCC(mec_int_cntl_reg, mec_int_cntl, i);
+					}
+				}
+			}
+		}
 		break;
 	default:
 		break;
-- 
2.43.0

[PATCH AUTOSEL 6.10 157/197] drm/amd/display: Avoid overflow assignment in link_dp_cts

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit a15268787b79fd183dd526cc16bec9af4f4e49a1 ]

sampling_rate is an uint8_t but is assigned an unsigned int, and thus it
can overflow. As a result, sampling_rate is changed to uint32_t.

Similarly, LINK_QUAL_PATTERN_SET has a size of 2 bits, and it should
only be assigned to a value less or equal than 4.

This fixes 2 INTEGER_OVERFLOW issues reported by Coverity.

Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dc_dp_types.h                  | 2 +-
 drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c | 3 ++-
 drivers/gpu/drm/amd/display/include/dpcd_defs.h               | 1 +
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
index 519c3df78ee5b..95c275bf649bd 100644
--- a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
+++ b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h
@@ -727,7 +727,7 @@ struct dp_audio_test_data_flags {
 struct dp_audio_test_data {
 
 	struct dp_audio_test_data_flags flags;
-	uint8_t sampling_rate;
+	uint32_t sampling_rate;
 	uint8_t channel_count;
 	uint8_t pattern_type;
 	uint8_t pattern_period[8];
diff --git a/drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c b/drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c
index 8d1a1cc94a8b3..6b27ac56f60d8 100644
--- a/drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c
+++ b/drivers/gpu/drm/amd/display/dc/link/accessories/link_dp_cts.c
@@ -775,7 +775,8 @@ bool dp_set_test_pattern(
 			core_link_read_dpcd(link, DP_TRAINING_PATTERN_SET,
 					    &training_pattern.raw,
 					    sizeof(training_pattern));
-			training_pattern.v1_3.LINK_QUAL_PATTERN_SET = pattern;
+			if (pattern <= PHY_TEST_PATTERN_END_DP11)
+				training_pattern.v1_3.LINK_QUAL_PATTERN_SET = pattern;
 			core_link_write_dpcd(link, DP_TRAINING_PATTERN_SET,
 					     &training_pattern.raw,
 					     sizeof(training_pattern));
diff --git a/drivers/gpu/drm/amd/display/include/dpcd_defs.h b/drivers/gpu/drm/amd/display/include/dpcd_defs.h
index aee5170f5fb23..c246235e4afec 100644
--- a/drivers/gpu/drm/amd/display/include/dpcd_defs.h
+++ b/drivers/gpu/drm/amd/display/include/dpcd_defs.h
@@ -76,6 +76,7 @@ enum dpcd_phy_test_patterns {
 	PHY_TEST_PATTERN_D10_2,
 	PHY_TEST_PATTERN_SYMBOL_ERROR,
 	PHY_TEST_PATTERN_PRBS7,
+	PHY_TEST_PATTERN_END_DP11 = PHY_TEST_PATTERN_PRBS7,
 	PHY_TEST_PATTERN_80BIT_CUSTOM,/* For DP1.2 only */
 	PHY_TEST_PATTERN_CP2520_1,
 	PHY_TEST_PATTERN_CP2520_2,
-- 
2.43.0

[PATCH AUTOSEL 6.10 158/197] drm/amd/display: Initialize get_bytes_per_element's default to 1

[Sasha Levin]

From: Alex Hung <alex.hung@amd.com>

[ Upstream commit 4067f4fa0423a89fb19a30b57231b384d77d2610 ]

Variables, used as denominators and maybe not assigned to other values,
should not be 0. bytes_per_element_y & bytes_per_element_c are
initialized by get_bytes_per_element() which should never return 0.

This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.

Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c | 2 +-
 .../gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c
index 0fc9f3e3ffaef..f603486af6e30 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_rq_dlg_calc_20v2.c
@@ -78,7 +78,7 @@ static void calculate_ttu_cursor(struct display_mode_lib *mode_lib,
 
 static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma)
 {
-	unsigned int ret_val = 0;
+	unsigned int ret_val = 1;
 
 	if (source_format == dm_444_16) {
 		if (!is_chroma)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c
index 618f4b682ab1b..9f28e4d3c664c 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_rq_dlg_calc_21.c
@@ -53,7 +53,7 @@ static void calculate_ttu_cursor(
 
 static unsigned int get_bytes_per_element(enum source_format_class source_format, bool is_chroma)
 {
-	unsigned int ret_val = 0;
+	unsigned int ret_val = 1;
 
 	if (source_format == dm_444_16) {
 		if (!is_chroma)
-- 
2.43.0

[PATCH AUTOSEL 6.10 159/197] drm/printer: Allow NULL data in devcoredump printer

[Sasha Levin]

From: Matthew Brost <matthew.brost@intel.com>

[ Upstream commit 53369581dc0c68a5700ed51e1660f44c4b2bb524 ]

We want to determine the size of the devcoredump before writing it out.
To that end, we will run the devcoredump printer with NULL data to get
the size, alloc data based on the generated offset, then run the
devcorecump again with a valid data pointer to print.  This necessitates
not writing data to the data pointer on the initial pass, when it is
NULL.

v5:
 - Better commit message (Jonathan)
 - Add kerenl doc with examples (Jani)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_print.c | 13 +++++----
 include/drm/drm_print.h     | 54 ++++++++++++++++++++++++++++++++++++-
 2 files changed, 61 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_print.c b/drivers/gpu/drm/drm_print.c
index cf2efb44722c9..1d122d4de70ec 100644
--- a/drivers/gpu/drm/drm_print.c
+++ b/drivers/gpu/drm/drm_print.c
@@ -100,8 +100,9 @@ void __drm_puts_coredump(struct drm_printer *p, const char *str)
 			copy = iterator->remain;
 
 		/* Copy out the bit of the string that we need */
-		memcpy(iterator->data,
-			str + (iterator->start - iterator->offset), copy);
+		if (iterator->data)
+			memcpy(iterator->data,
+			       str + (iterator->start - iterator->offset), copy);
 
 		iterator->offset = iterator->start + copy;
 		iterator->remain -= copy;
@@ -110,7 +111,8 @@ void __drm_puts_coredump(struct drm_printer *p, const char *str)
 
 		len = min_t(ssize_t, strlen(str), iterator->remain);
 
-		memcpy(iterator->data + pos, str, len);
+		if (iterator->data)
+			memcpy(iterator->data + pos, str, len);
 
 		iterator->offset += len;
 		iterator->remain -= len;
@@ -140,8 +142,9 @@ void __drm_printfn_coredump(struct drm_printer *p, struct va_format *vaf)
 	if ((iterator->offset >= iterator->start) && (len < iterator->remain)) {
 		ssize_t pos = iterator->offset - iterator->start;
 
-		snprintf(((char *) iterator->data) + pos,
-			iterator->remain, "%pV", vaf);
+		if (iterator->data)
+			snprintf(((char *) iterator->data) + pos,
+				 iterator->remain, "%pV", vaf);
 
 		iterator->offset += len;
 		iterator->remain -= len;
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index 089950ad8681a..8fad7d09bedae 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -220,7 +220,8 @@ drm_vprintf(struct drm_printer *p, const char *fmt, va_list *va)
 
 /**
  * struct drm_print_iterator - local struct used with drm_printer_coredump
- * @data: Pointer to the devcoredump output buffer
+ * @data: Pointer to the devcoredump output buffer, can be NULL if using
+ * drm_printer_coredump to determine size of devcoredump
  * @start: The offset within the buffer to start writing
  * @remain: The number of bytes to write for this iteration
  */
@@ -265,6 +266,57 @@ struct drm_print_iterator {
  *			coredump_read, ...)
  *	}
  *
+ * The above example has a time complexity of O(N^2), where N is the size of the
+ * devcoredump. This is acceptable for small devcoredumps but scales poorly for
+ * larger ones.
+ *
+ * Another use case for drm_coredump_printer is to capture the devcoredump into
+ * a saved buffer before the dev_coredump() callback. This involves two passes:
+ * one to determine the size of the devcoredump and another to print it to a
+ * buffer. Then, in dev_coredump(), copy from the saved buffer into the
+ * devcoredump read buffer.
+ *
+ * For example::
+ *
+ *	char *devcoredump_saved_buffer;
+ *
+ *	ssize_t __coredump_print(char *buffer, ssize_t count, ...)
+ *	{
+ *		struct drm_print_iterator iter;
+ *		struct drm_printer p;
+ *
+ *		iter.data = buffer;
+ *		iter.start = 0;
+ *		iter.remain = count;
+ *
+ *		p = drm_coredump_printer(&iter);
+ *
+ *		drm_printf(p, "foo=%d\n", foo);
+ *		...
+ *		return count - iter.remain;
+ *	}
+ *
+ *	void coredump_print(...)
+ *	{
+ *		ssize_t count;
+ *
+ *		count = __coredump_print(NULL, INT_MAX, ...);
+ *		devcoredump_saved_buffer = kvmalloc(count, GFP_KERNEL);
+ *		__coredump_print(devcoredump_saved_buffer, count, ...);
+ *	}
+ *
+ *	void coredump_read(char *buffer, loff_t offset, size_t count,
+ *			   void *data, size_t datalen)
+ *	{
+ *		...
+ *		memcpy(buffer, devcoredump_saved_buffer + offset, count);
+ *		...
+ *	}
+ *
+ * The above example has a time complexity of O(N*2), where N is the size of the
+ * devcoredump. This scales better than the previous example for larger
+ * devcoredumps.
+ *
  * RETURNS:
  * The &drm_printer object
  */
-- 
2.43.0

[PATCH AUTOSEL 6.10 160/197] perf,x86: avoid missing caller address in stack traces captured in uprobe

[Sasha Levin]

From: Andrii Nakryiko <andrii@kernel.org>

[ Upstream commit cfa7f3d2c526c224a6271cc78a4a27a0de06f4f0 ]

When tracing user functions with uprobe functionality, it's common to
install the probe (e.g., a BPF program) at the first instruction of the
function. This is often going to be `push %rbp` instruction in function
preamble, which means that within that function frame pointer hasn't
been established yet. This leads to consistently missing an actual
caller of the traced function, because perf_callchain_user() only
records current IP (capturing traced function) and then following frame
pointer chain (which would be caller's frame, containing the address of
caller's caller).

So when we have target_1 -> target_2 -> target_3 call chain and we are
tracing an entry to target_3, captured stack trace will report
target_1 -> target_3 call chain, which is wrong and confusing.

This patch proposes a x86-64-specific heuristic to detect `push %rbp`
(`push %ebp` on 32-bit architecture) instruction being traced. Given
entire kernel implementation of user space stack trace capturing works
under assumption that user space code was compiled with frame pointer
register (%rbp/%ebp) preservation, it seems pretty reasonable to use
this instruction as a strong indicator that this is the entry to the
function. In that case, return address is still pointed to by %rsp/%esp,
so we fetch it and add to stack trace before proceeding to unwind the
rest using frame pointer-based logic.

We also check for `endbr64` (for 64-bit modes) as another common pattern
for function entry, as suggested by Josh Poimboeuf. Even if we get this
wrong sometimes for uprobes attached not at the function entry, it's OK
because stack trace will still be overall meaningful, just with one
extra bogus entry. If we don't detect this, we end up with guaranteed to
be missing caller function entry in the stack trace, which is worse
overall.

Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240729175223.23914-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/core.c  | 63 +++++++++++++++++++++++++++++++++++++++++
 include/linux/uprobes.h |  2 ++
 kernel/events/uprobes.c |  2 ++
 3 files changed, 67 insertions(+)

diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index 83d12dd3f831a..d77a97056844b 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -41,6 +41,8 @@
 #include <asm/desc.h>
 #include <asm/ldt.h>
 #include <asm/unwind.h>
+#include <asm/uprobes.h>
+#include <asm/ibt.h>
 
 #include "perf_event.h"
 
@@ -2814,6 +2816,46 @@ static unsigned long get_segment_base(unsigned int segment)
 	return get_desc_base(desc);
 }
 
+#ifdef CONFIG_UPROBES
+/*
+ * Heuristic-based check if uprobe is installed at the function entry.
+ *
+ * Under assumption of user code being compiled with frame pointers,
+ * `push %rbp/%ebp` is a good indicator that we indeed are.
+ *
+ * Similarly, `endbr64` (assuming 64-bit mode) is also a common pattern.
+ * If we get this wrong, captured stack trace might have one extra bogus
+ * entry, but the rest of stack trace will still be meaningful.
+ */
+static bool is_uprobe_at_func_entry(struct pt_regs *regs)
+{
+	struct arch_uprobe *auprobe;
+
+	if (!current->utask)
+		return false;
+
+	auprobe = current->utask->auprobe;
+	if (!auprobe)
+		return false;
+
+	/* push %rbp/%ebp */
+	if (auprobe->insn[0] == 0x55)
+		return true;
+
+	/* endbr64 (64-bit only) */
+	if (user_64bit_mode(regs) && is_endbr(*(u32 *)auprobe->insn))
+		return true;
+
+	return false;
+}
+
+#else
+static bool is_uprobe_at_func_entry(struct pt_regs *regs)
+{
+	return false;
+}
+#endif /* CONFIG_UPROBES */
+
 #ifdef CONFIG_IA32_EMULATION
 
 #include <linux/compat.h>
@@ -2825,6 +2867,7 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry_ctx *ent
 	unsigned long ss_base, cs_base;
 	struct stack_frame_ia32 frame;
 	const struct stack_frame_ia32 __user *fp;
+	u32 ret_addr;
 
 	if (user_64bit_mode(regs))
 		return 0;
@@ -2834,6 +2877,12 @@ perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry_ctx *ent
 
 	fp = compat_ptr(ss_base + regs->bp);
 	pagefault_disable();
+
+	/* see perf_callchain_user() below for why we do this */
+	if (is_uprobe_at_func_entry(regs) &&
+	    !get_user(ret_addr, (const u32 __user *)regs->sp))
+		perf_callchain_store(entry, ret_addr);
+
 	while (entry->nr < entry->max_stack) {
 		if (!valid_user_frame(fp, sizeof(frame)))
 			break;
@@ -2862,6 +2911,7 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs
 {
 	struct stack_frame frame;
 	const struct stack_frame __user *fp;
+	unsigned long ret_addr;
 
 	if (perf_guest_state()) {
 		/* TODO: We don't support guest os callchain now */
@@ -2885,6 +2935,19 @@ perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs
 		return;
 
 	pagefault_disable();
+
+	/*
+	 * If we are called from uprobe handler, and we are indeed at the very
+	 * entry to user function (which is normally a `push %rbp` instruction,
+	 * under assumption of application being compiled with frame pointers),
+	 * we should read return address from *regs->sp before proceeding
+	 * to follow frame pointers, otherwise we'll skip immediate caller
+	 * as %rbp is not yet setup.
+	 */
+	if (is_uprobe_at_func_entry(regs) &&
+	    !get_user(ret_addr, (const unsigned long __user *)regs->sp))
+		perf_callchain_store(entry, ret_addr);
+
 	while (entry->nr < entry->max_stack) {
 		if (!valid_user_frame(fp, sizeof(frame)))
 			break;
diff --git a/include/linux/uprobes.h b/include/linux/uprobes.h
index f46e0ca0169c7..d91e32aff5a13 100644
--- a/include/linux/uprobes.h
+++ b/include/linux/uprobes.h
@@ -76,6 +76,8 @@ struct uprobe_task {
 	struct uprobe			*active_uprobe;
 	unsigned long			xol_vaddr;
 
+	struct arch_uprobe              *auprobe;
+
 	struct return_instance		*return_instances;
 	unsigned int			depth;
 };
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 47cdec3e1df11..28c678c8daef3 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -2071,6 +2071,7 @@ static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs)
 	bool need_prep = false; /* prepare return uprobe, when needed */
 
 	down_read(&uprobe->register_rwsem);
+	current->utask->auprobe = &uprobe->arch;
 	for (uc = uprobe->consumers; uc; uc = uc->next) {
 		int rc = 0;
 
@@ -2085,6 +2086,7 @@ static void handler_chain(struct uprobe *uprobe, struct pt_regs *regs)
 
 		remove &= rc;
 	}
+	current->utask->auprobe = NULL;
 
 	if (need_prep && !remove)
 		prepare_uretprobe(uprobe, regs); /* put bp at return */
-- 
2.43.0

[PATCH AUTOSEL 6.10 161/197] scsi: aacraid: Rearrange order of struct aac_srb_unit

[Sasha Levin]

From: Kees Cook <kees@kernel.org>

[ Upstream commit 6e5860b0ad4934baee8c7a202c02033b2631bb44 ]

struct aac_srb_unit contains struct aac_srb, which contains struct sgmap,
which ends in a (currently) "fake" (1-element) flexible array.  Converting
this to a flexible array is needed so that runtime bounds checking won't
think the array is fixed size (i.e. under CONFIG_FORTIFY_SOURCE=y and/or
CONFIG_UBSAN_BOUNDS=y), as other parts of aacraid use struct sgmap as a
flexible array.

It is not legal to have a flexible array in the middle of a structure, so
it either needs to be split up or rearranged so that it is at the end of
the structure. Luckily, struct aac_srb_unit, which is exclusively
consumed/updated by aac_send_safw_bmic_cmd(), does not depend on member
ordering.

The values set in the on-stack struct aac_srb_unit instance "srbu" by the
only two callers, aac_issue_safw_bmic_identify() and
aac_get_safw_ciss_luns(), do not contain anything in srbu.srb.sgmap.sg, and
they both implicitly initialize srbu.srb.sgmap.count to 0 during
memset(). For example:

        memset(&srbu, 0, sizeof(struct aac_srb_unit));

        srbcmd = &srbu.srb;
        srbcmd->flags   = cpu_to_le32(SRB_DataIn);
        srbcmd->cdb[0]  = CISS_REPORT_PHYSICAL_LUNS;
        srbcmd->cdb[1]  = 2; /* extended reporting */
        srbcmd->cdb[8]  = (u8)(datasize >> 8);
        srbcmd->cdb[9]  = (u8)(datasize);

        rcode = aac_send_safw_bmic_cmd(dev, &srbu, phys_luns, datasize);

During aac_send_safw_bmic_cmd(), a separate srb is mapped into DMA, and has
srbu.srb copied into it:

        srb = fib_data(fibptr);
        memcpy(srb, &srbu->srb, sizeof(struct aac_srb));

Only then is srb.sgmap.count written and srb->sg populated:

        srb->count              = cpu_to_le32(xfer_len);

        sg64 = (struct sgmap64 *)&srb->sg;
        sg64->count             = cpu_to_le32(1);
        sg64->sg[0].addr[1]     = cpu_to_le32(upper_32_bits(addr));
        sg64->sg[0].addr[0]     = cpu_to_le32(lower_32_bits(addr));
        sg64->sg[0].count       = cpu_to_le32(xfer_len);

But this is happening in the DMA memory, not in srbu.srb. An attempt to
copy the changes back to srbu does happen:

        /*
         * Copy the updated data for other dumping or other usage if
         * needed
         */
        memcpy(&srbu->srb, srb, sizeof(struct aac_srb));

But this was never correct: the sg64 (3 u32s) overlap of srb.sg (2 u32s)
always meant that srbu.srb would have held truncated information and any
attempt to walk srbu.srb.sg.sg based on the value of srbu.srb.sg.count
would result in attempting to parse past the end of srbu.srb.sg.sg[0] into
srbu.srb_reply.

After getting a reply from hardware, the reply is copied into
srbu.srb_reply:

        srb_reply = (struct aac_srb_reply *)fib_data(fibptr);
        memcpy(&srbu->srb_reply, srb_reply, sizeof(struct aac_srb_reply));

This has always been fixed-size, so there's no issue here. It is worth
noting that the two callers _never check_ srbu contents -- neither
srbu.srb nor srbu.srb_reply is examined. (They depend on the mapped
xfer_buf instead.)

Therefore, the ordering of members in struct aac_srb_unit does not matter,
and the flexible array member can moved to the end.

(Additionally, the two memcpy()s that update srbu could be entirely
removed as they are never consumed, but I left that as-is.)

Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240711215739.208776-1-kees@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/aacraid/aacraid.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 7d5a155073c62..9b66fa29fb05c 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2029,8 +2029,8 @@ struct aac_srb_reply
 };
 
 struct aac_srb_unit {
-	struct aac_srb		srb;
 	struct aac_srb_reply	srb_reply;
+	struct aac_srb		srb;
 };
 
 /*
-- 
2.43.0

[PATCH AUTOSEL 6.10 162/197] scsi: lpfc: Validate hdwq pointers before dereferencing in reset/errata paths

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 2be1d4f11944cd6283cb97268b3e17c4424945ca ]

When the HBA is undergoing a reset or is handling an errata event, NULL ptr
dereference crashes may occur in routines such as
lpfc_sli_flush_io_rings(), lpfc_dev_loss_tmo_callbk(), or
lpfc_abort_handler().

Add NULL ptr checks before dereferencing hdwq pointers that may have been
freed due to operations colliding with a reset or errata event handler.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_hbadisc.c |  3 ++-
 drivers/scsi/lpfc/lpfc_scsi.c    | 13 +++++++++++--
 drivers/scsi/lpfc/lpfc_sli.c     | 11 +++++++++++
 3 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 13b08c85440fe..e74a676b6e153 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -175,7 +175,8 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
 			 ndlp->nlp_state, ndlp->fc4_xpt_flags);
 
 	/* Don't schedule a worker thread event if the vport is going down. */
-	if (test_bit(FC_UNLOADING, &vport->load_flag)) {
+	if (test_bit(FC_UNLOADING, &vport->load_flag) ||
+	    !test_bit(HBA_SETUP, &phba->hba_flag)) {
 		spin_lock_irqsave(&ndlp->lock, iflags);
 		ndlp->rport = NULL;
 
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 98ce9d97a2257..60cd60ebff38e 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5555,11 +5555,20 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
 
 	iocb = &lpfc_cmd->cur_iocbq;
 	if (phba->sli_rev == LPFC_SLI_REV4) {
-		pring_s4 = phba->sli4_hba.hdwq[iocb->hba_wqidx].io_wq->pring;
-		if (!pring_s4) {
+		/* if the io_wq & pring are gone, the port was reset. */
+		if (!phba->sli4_hba.hdwq[iocb->hba_wqidx].io_wq ||
+		    !phba->sli4_hba.hdwq[iocb->hba_wqidx].io_wq->pring) {
+			lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+					 "2877 SCSI Layer I/O Abort Request "
+					 "IO CMPL Status x%x ID %d LUN %llu "
+					 "HBA_SETUP %d\n", FAILED,
+					 cmnd->device->id,
+					 (u64)cmnd->device->lun,
+					 test_bit(HBA_SETUP, &phba->hba_flag));
 			ret = FAILED;
 			goto out_unlock_hba;
 		}
+		pring_s4 = phba->sli4_hba.hdwq[iocb->hba_wqidx].io_wq->pring;
 		spin_lock(&pring_s4->ring_lock);
 	}
 	/* the command is in process of being cancelled */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 3e55d5edd60ab..c6fcaeeb52945 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -4687,6 +4687,17 @@ lpfc_sli_flush_io_rings(struct lpfc_hba *phba)
 	/* Look on all the FCP Rings for the iotag */
 	if (phba->sli_rev >= LPFC_SLI_REV4) {
 		for (i = 0; i < phba->cfg_hdw_queue; i++) {
+			if (!phba->sli4_hba.hdwq ||
+			    !phba->sli4_hba.hdwq[i].io_wq) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+						"7777 hdwq's deleted %lx "
+						"%lx %x %x\n",
+						phba->pport->load_flag,
+						phba->hba_flag,
+						phba->link_state,
+						phba->sli.sli_flag);
+				return;
+			}
 			pring = phba->sli4_hba.hdwq[i].io_wq->pring;
 
 			spin_lock_irq(&pring->ring_lock);
-- 
2.43.0

[PATCH AUTOSEL 6.10 163/197] scsi: lpfc: Fix unsolicited FLOGI kref imbalance when in direct attached topology

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit b5c18c9dd138733c16893613345af44deadcf05e ]

In direct attached topology, certain target vendors that are quick to issue
FLOGI followed by a cable pull for more than dev_loss_tmo may result in a
kref imbalance for the remote port ndlp object.

Add an nlp_get when the defer_flogi_acc flag is set.  This is expected to
balance the nlp_put in the defer_flogi_acc clause in the
lpfc_issue_els_flogi() routine.  Because we need to retain the ndlp ptr,
reorganize all of the defer_flogi_acc information into one
lpfc_defer_flogi_acc struct.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc.h         | 12 ++++++---
 drivers/scsi/lpfc/lpfc_els.c     | 46 +++++++++++++++++++-------------
 drivers/scsi/lpfc/lpfc_hbadisc.c | 11 ++++++--
 3 files changed, 46 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 7c147d6ea8a8f..e5a9c5a323f8b 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -306,6 +306,14 @@ struct lpfc_stats {
 
 struct lpfc_hba;
 
+/* Data structure to keep withheld FLOGI_ACC information */
+struct lpfc_defer_flogi_acc {
+	bool flag;
+	u16 rx_id;
+	u16 ox_id;
+	struct lpfc_nodelist *ndlp;
+
+};
 
 #define LPFC_VMID_TIMER   300	/* timer interval in seconds */
 
@@ -1430,9 +1438,7 @@ struct lpfc_hba {
 	uint16_t vlan_id;
 	struct list_head fcf_conn_rec_list;
 
-	bool defer_flogi_acc_flag;
-	uint16_t defer_flogi_acc_rx_id;
-	uint16_t defer_flogi_acc_ox_id;
+	struct lpfc_defer_flogi_acc defer_flogi_acc;
 
 	spinlock_t ct_ev_lock; /* synchronize access to ct_ev_waiters */
 	struct list_head ct_ev_waiters;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 445cb6c2e80f5..9084976aa77e1 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1390,7 +1390,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	phba->link_flag &= ~LS_EXTERNAL_LOOPBACK;
 
 	/* Check for a deferred FLOGI ACC condition */
-	if (phba->defer_flogi_acc_flag) {
+	if (phba->defer_flogi_acc.flag) {
 		/* lookup ndlp for received FLOGI */
 		ndlp = lpfc_findnode_did(vport, 0);
 		if (!ndlp)
@@ -1404,34 +1404,38 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		if (phba->sli_rev == LPFC_SLI_REV4) {
 			bf_set(wqe_ctxt_tag,
 			       &defer_flogi_acc.wqe.xmit_els_rsp.wqe_com,
-			       phba->defer_flogi_acc_rx_id);
+			       phba->defer_flogi_acc.rx_id);
 			bf_set(wqe_rcvoxid,
 			       &defer_flogi_acc.wqe.xmit_els_rsp.wqe_com,
-			       phba->defer_flogi_acc_ox_id);
+			       phba->defer_flogi_acc.ox_id);
 		} else {
 			icmd = &defer_flogi_acc.iocb;
-			icmd->ulpContext = phba->defer_flogi_acc_rx_id;
+			icmd->ulpContext = phba->defer_flogi_acc.rx_id;
 			icmd->unsli3.rcvsli3.ox_id =
-				phba->defer_flogi_acc_ox_id;
+				phba->defer_flogi_acc.ox_id;
 		}
 
 		lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 				 "3354 Xmit deferred FLOGI ACC: rx_id: x%x,"
 				 " ox_id: x%x, hba_flag x%lx\n",
-				 phba->defer_flogi_acc_rx_id,
-				 phba->defer_flogi_acc_ox_id, phba->hba_flag);
+				 phba->defer_flogi_acc.rx_id,
+				 phba->defer_flogi_acc.ox_id, phba->hba_flag);
 
 		/* Send deferred FLOGI ACC */
 		lpfc_els_rsp_acc(vport, ELS_CMD_FLOGI, &defer_flogi_acc,
 				 ndlp, NULL);
 
-		phba->defer_flogi_acc_flag = false;
-		vport->fc_myDID = did;
+		phba->defer_flogi_acc.flag = false;
 
-		/* Decrement ndlp reference count to indicate the node can be
-		 * released when other references are removed.
+		/* Decrement the held ndlp that was incremented when the
+		 * deferred flogi acc flag was set.
 		 */
-		lpfc_nlp_put(ndlp);
+		if (phba->defer_flogi_acc.ndlp) {
+			lpfc_nlp_put(phba->defer_flogi_acc.ndlp);
+			phba->defer_flogi_acc.ndlp = NULL;
+		}
+
+		vport->fc_myDID = did;
 	}
 
 	return 0;
@@ -8454,9 +8458,9 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 
 	/* Defer ACC response until AFTER we issue a FLOGI */
 	if (!test_bit(HBA_FLOGI_ISSUED, &phba->hba_flag)) {
-		phba->defer_flogi_acc_rx_id = bf_get(wqe_ctxt_tag,
+		phba->defer_flogi_acc.rx_id = bf_get(wqe_ctxt_tag,
 						     &wqe->xmit_els_rsp.wqe_com);
-		phba->defer_flogi_acc_ox_id = bf_get(wqe_rcvoxid,
+		phba->defer_flogi_acc.ox_id = bf_get(wqe_rcvoxid,
 						     &wqe->xmit_els_rsp.wqe_com);
 
 		vport->fc_myDID = did;
@@ -8464,11 +8468,17 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 				 "3344 Deferring FLOGI ACC: rx_id: x%x,"
 				 " ox_id: x%x, hba_flag x%lx\n",
-				 phba->defer_flogi_acc_rx_id,
-				 phba->defer_flogi_acc_ox_id, phba->hba_flag);
+				 phba->defer_flogi_acc.rx_id,
+				 phba->defer_flogi_acc.ox_id, phba->hba_flag);
 
-		phba->defer_flogi_acc_flag = true;
+		phba->defer_flogi_acc.flag = true;
 
+		/* This nlp_get is paired with nlp_puts that reset the
+		 * defer_flogi_acc.flag back to false.  We need to retain
+		 * a kref on the ndlp until the deferred FLOGI ACC is
+		 * processed or cancelled.
+		 */
+		phba->defer_flogi_acc.ndlp = lpfc_nlp_get(ndlp);
 		return 0;
 	}
 
@@ -10504,7 +10514,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 
 		lpfc_els_rcv_flogi(vport, elsiocb, ndlp);
 		/* retain node if our response is deferred */
-		if (phba->defer_flogi_acc_flag)
+		if (phba->defer_flogi_acc.flag)
 			break;
 		if (newnode)
 			lpfc_disc_state_machine(vport, ndlp, NULL,
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e74a676b6e153..e553fab869de9 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1247,7 +1247,14 @@ lpfc_linkdown(struct lpfc_hba *phba)
 	lpfc_scsi_dev_block(phba);
 	offline = pci_channel_offline(phba->pcidev);
 
-	phba->defer_flogi_acc_flag = false;
+	/* Decrement the held ndlp if there is a deferred flogi acc */
+	if (phba->defer_flogi_acc.flag) {
+		if (phba->defer_flogi_acc.ndlp) {
+			lpfc_nlp_put(phba->defer_flogi_acc.ndlp);
+			phba->defer_flogi_acc.ndlp = NULL;
+		}
+	}
+	phba->defer_flogi_acc.flag = false;
 
 	/* Clear external loopback plug detected flag */
 	phba->link_flag &= ~LS_EXTERNAL_LOOPBACK;
@@ -1369,7 +1376,7 @@ lpfc_linkup_port(struct lpfc_vport *vport)
 		(vport != phba->pport))
 		return;
 
-	if (phba->defer_flogi_acc_flag) {
+	if (phba->defer_flogi_acc.flag) {
 		clear_bit(FC_ABORT_DISCOVERY, &vport->fc_flag);
 		clear_bit(FC_RSCN_MODE, &vport->fc_flag);
 		clear_bit(FC_NLP_MORE, &vport->fc_flag);
-- 
2.43.0

[PATCH AUTOSEL 6.10 164/197] scsi: lpfc: Update PRLO handling in direct attached topology

[Sasha Levin]

From: Justin Tee <justin.tee@broadcom.com>

[ Upstream commit 1f0f7679ad8942f810b0f19ee9cf098c3502d66a ]

A kref imbalance occurs when handling an unsolicited PRLO in direct
attached topology.

Rework PRLO rcv handling when in MAPPED state.  Save the state that we were
handling a PRLO by setting nlp_last_elscmd to ELS_CMD_PRLO.  Then in the
lpfc_cmpl_els_logo_acc() completion routine, manually restart discovery.
By issuing the PLOGI, which nlp_gets, before nlp_put at the end of the
lpfc_cmpl_els_logo_acc() routine, we are saving us from a final nlp_put.
And, we are still allowing the unreg_rpi to happen.

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240726231512.92867-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c       | 27 ++++++++++++++++-----------
 drivers/scsi/lpfc/lpfc_nportdisc.c | 22 ++++++++++++++++++++--
 2 files changed, 36 insertions(+), 13 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 9084976aa77e1..9c8a6d2a29049 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5244,9 +5244,10 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	/* ACC to LOGO completes to NPort <nlp_DID> */
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			 "0109 ACC to LOGO completes to NPort x%x refcnt %d "
-			 "Data: x%x x%x x%x\n",
-			 ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp->nlp_flag,
-			 ndlp->nlp_state, ndlp->nlp_rpi);
+			 "last els x%x Data: x%x x%x x%x\n",
+			 ndlp->nlp_DID, kref_read(&ndlp->kref),
+			 ndlp->nlp_last_elscmd, ndlp->nlp_flag, ndlp->nlp_state,
+			 ndlp->nlp_rpi);
 
 	/* This clause allows the LOGO ACC to complete and free resources
 	 * for the Fabric Domain Controller.  It does deliberately skip
@@ -5258,18 +5259,22 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		goto out;
 
 	if (ndlp->nlp_state == NLP_STE_NPR_NODE) {
-		/* If PLOGI is being retried, PLOGI completion will cleanup the
-		 * node. The NLP_NPR_2B_DISC flag needs to be retained to make
-		 * progress on nodes discovered from last RSCN.
-		 */
-		if ((ndlp->nlp_flag & NLP_DELAY_TMO) &&
-		    (ndlp->nlp_last_elscmd == ELS_CMD_PLOGI))
-			goto out;
-
 		if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
 			lpfc_unreg_rpi(vport, ndlp);
 
+		/* If came from PRLO, then PRLO_ACC is done.
+		 * Start rediscovery now.
+		 */
+		if (ndlp->nlp_last_elscmd == ELS_CMD_PRLO) {
+			spin_lock_irq(&ndlp->lock);
+			ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+			spin_unlock_irq(&ndlp->lock);
+			ndlp->nlp_prev_state = ndlp->nlp_state;
+			lpfc_nlp_set_state(vport, ndlp, NLP_STE_PLOGI_ISSUE);
+			lpfc_issue_els_plogi(vport, ndlp->nlp_DID, 0);
+		}
 	}
+
  out:
 	/*
 	 * The driver received a LOGO from the rport and has ACK'd it.
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index f6a53446e57f9..4574716c8764f 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -2652,8 +2652,26 @@ lpfc_rcv_prlo_mapped_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	/* flush the target */
 	lpfc_sli_abort_iocb(vport, ndlp->nlp_sid, 0, LPFC_CTX_TGT);
 
-	/* Treat like rcv logo */
-	lpfc_rcv_logo(vport, ndlp, cmdiocb, ELS_CMD_PRLO);
+	/* Send PRLO_ACC */
+	spin_lock_irq(&ndlp->lock);
+	ndlp->nlp_flag |= NLP_LOGO_ACC;
+	spin_unlock_irq(&ndlp->lock);
+	lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
+
+	/* Save ELS_CMD_PRLO as the last elscmd and then set to NPR.
+	 * lpfc_cmpl_els_logo_acc is expected to restart discovery.
+	 */
+	ndlp->nlp_last_elscmd = ELS_CMD_PRLO;
+	ndlp->nlp_prev_state = ndlp->nlp_state;
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_NODE | LOG_ELS | LOG_DISCOVERY,
+			 "3422 DID x%06x nflag x%x lastels x%x ref cnt %u\n",
+			 ndlp->nlp_DID, ndlp->nlp_flag,
+			 ndlp->nlp_last_elscmd,
+			 kref_read(&ndlp->kref));
+
+	lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+
 	return ndlp->nlp_state;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 165/197] drm/amdgpu: fix unchecked return value warning for amdgpu_gfx

[Sasha Levin]

From: Tim Huang <tim.huang@amd.com>

[ Upstream commit c0277b9d7c2ee9ee5dbc948548984f0fbb861301 ]

This resolves the unchecded return value warning reported by Coverity.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
index e92bdc9a39d35..1935b211b527d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gfx.c
@@ -816,8 +816,11 @@ int amdgpu_gfx_ras_late_init(struct amdgpu_device *adev, struct ras_common_if *r
 	int r;
 
 	if (amdgpu_ras_is_supported(adev, ras_block->block)) {
-		if (!amdgpu_persistent_edc_harvesting_supported(adev))
-			amdgpu_ras_reset_error_status(adev, AMDGPU_RAS_BLOCK__GFX);
+		if (!amdgpu_persistent_edc_harvesting_supported(adev)) {
+			r = amdgpu_ras_reset_error_status(adev, AMDGPU_RAS_BLOCK__GFX);
+			if (r)
+				return r;
+		}
 
 		r = amdgpu_ras_block_late_init(adev, ras_block);
 		if (r)
@@ -961,7 +964,10 @@ uint32_t amdgpu_kiq_rreg(struct amdgpu_device *adev, uint32_t reg, uint32_t xcc_
 		pr_err("critical bug! too many kiq readers\n");
 		goto failed_unlock;
 	}
-	amdgpu_ring_alloc(ring, 32);
+	r = amdgpu_ring_alloc(ring, 32);
+	if (r)
+		goto failed_unlock;
+
 	amdgpu_ring_emit_rreg(ring, reg, reg_val_offs);
 	r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
 	if (r)
@@ -1027,7 +1033,10 @@ void amdgpu_kiq_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v, uint3
 	}
 
 	spin_lock_irqsave(&kiq->ring_lock, flags);
-	amdgpu_ring_alloc(ring, 32);
+	r = amdgpu_ring_alloc(ring, 32);
+	if (r)
+		goto failed_unlock;
+
 	amdgpu_ring_emit_wreg(ring, reg, v);
 	r = amdgpu_fence_emit_polling(ring, &seq, MAX_KIQ_REG_WAIT);
 	if (r)
@@ -1063,6 +1072,7 @@ void amdgpu_kiq_wreg(struct amdgpu_device *adev, uint32_t reg, uint32_t v, uint3
 
 failed_undo:
 	amdgpu_ring_undo(ring);
+failed_unlock:
 	spin_unlock_irqrestore(&kiq->ring_lock, flags);
 failed_kiq_write:
 	dev_err(adev->dev, "failed to write reg:%x\n", reg);
-- 
2.43.0

[PATCH AUTOSEL 6.10 166/197] drm/amdgpu: fix unchecked return value warning for amdgpu_atombios

[Sasha Levin]

From: Tim Huang <tim.huang@amd.com>

[ Upstream commit 92549780e32718d64a6d08bbbb3c6fffecb541c7 ]

This resolves the unchecded return value warning reported by Coverity.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c | 35 ++++++++++++--------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c
index 7dc102f0bc1d3..0c8975ac5af9e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atombios.c
@@ -1018,8 +1018,9 @@ int amdgpu_atombios_get_clock_dividers(struct amdgpu_device *adev,
 		if (clock_type == COMPUTE_ENGINE_PLL_PARAM) {
 			args.v3.ulClockParams = cpu_to_le32((clock_type << 24) | clock);
 
-			amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args,
-				sizeof(args));
+			if (amdgpu_atom_execute_table(adev->mode_info.atom_context,
+			    index, (uint32_t *)&args, sizeof(args)))
+				return -EINVAL;
 
 			dividers->post_div = args.v3.ucPostDiv;
 			dividers->enable_post_div = (args.v3.ucCntlFlag &
@@ -1039,8 +1040,9 @@ int amdgpu_atombios_get_clock_dividers(struct amdgpu_device *adev,
 			if (strobe_mode)
 				args.v5.ucInputFlag = ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN;
 
-			amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args,
-				sizeof(args));
+			if (amdgpu_atom_execute_table(adev->mode_info.atom_context,
+			    index, (uint32_t *)&args, sizeof(args)))
+				return -EINVAL;
 
 			dividers->post_div = args.v5.ucPostDiv;
 			dividers->enable_post_div = (args.v5.ucCntlFlag &
@@ -1058,8 +1060,9 @@ int amdgpu_atombios_get_clock_dividers(struct amdgpu_device *adev,
 		/* fusion */
 		args.v4.ulClock = cpu_to_le32(clock);	/* 10 khz */
 
-		amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args,
-			sizeof(args));
+		if (amdgpu_atom_execute_table(adev->mode_info.atom_context,
+		    index, (uint32_t *)&args, sizeof(args)))
+			return -EINVAL;
 
 		dividers->post_divider = dividers->post_div = args.v4.ucPostDiv;
 		dividers->real_clock = le32_to_cpu(args.v4.ulClock);
@@ -1070,8 +1073,9 @@ int amdgpu_atombios_get_clock_dividers(struct amdgpu_device *adev,
 		args.v6_in.ulClock.ulComputeClockFlag = clock_type;
 		args.v6_in.ulClock.ulClockFreq = cpu_to_le32(clock);	/* 10 khz */
 
-		amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args,
-			sizeof(args));
+		if (amdgpu_atom_execute_table(adev->mode_info.atom_context,
+		    index, (uint32_t *)&args, sizeof(args)))
+			return -EINVAL;
 
 		dividers->whole_fb_div = le16_to_cpu(args.v6_out.ulFbDiv.usFbDiv);
 		dividers->frac_fb_div = le16_to_cpu(args.v6_out.ulFbDiv.usFbDivFrac);
@@ -1113,8 +1117,9 @@ int amdgpu_atombios_get_memory_pll_dividers(struct amdgpu_device *adev,
 			if (strobe_mode)
 				args.ucInputFlag |= MPLL_INPUT_FLAG_STROBE_MODE_EN;
 
-			amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args,
-				sizeof(args));
+			if (amdgpu_atom_execute_table(adev->mode_info.atom_context,
+			    index, (uint32_t *)&args, sizeof(args)))
+				return -EINVAL;
 
 			mpll_param->clkfrac = le16_to_cpu(args.ulFbDiv.usFbDivFrac);
 			mpll_param->clkf = le16_to_cpu(args.ulFbDiv.usFbDiv);
@@ -1211,8 +1216,9 @@ int amdgpu_atombios_get_max_vddc(struct amdgpu_device *adev, u8 voltage_type,
 		args.v2.ucVoltageMode = 0;
 		args.v2.usVoltageLevel = 0;
 
-		amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args,
-			sizeof(args));
+		if (amdgpu_atom_execute_table(adev->mode_info.atom_context,
+		    index, (uint32_t *)&args, sizeof(args)))
+			return -EINVAL;
 
 		*voltage = le16_to_cpu(args.v2.usVoltageLevel);
 		break;
@@ -1221,8 +1227,9 @@ int amdgpu_atombios_get_max_vddc(struct amdgpu_device *adev, u8 voltage_type,
 		args.v3.ucVoltageMode = ATOM_GET_VOLTAGE_LEVEL;
 		args.v3.usVoltageLevel = cpu_to_le16(voltage_id);
 
-		amdgpu_atom_execute_table(adev->mode_info.atom_context, index, (uint32_t *)&args,
-			sizeof(args));
+		if (amdgpu_atom_execute_table(adev->mode_info.atom_context,
+		    index, (uint32_t *)&args, sizeof(args)))
+			return -EINVAL;
 
 		*voltage = le16_to_cpu(args.v3.usVoltageLevel);
 		break;
-- 
2.43.0

[PATCH AUTOSEL 6.10 167/197] perf: Fix event_function_call() locking

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 558abc7e3f895049faa46b08656be4c60dc6e9fd ]

All the event_function/@func call context already uses perf_ctx_lock()
except for the !ctx->is_active case. Make it all consistent.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240807115550.138301094@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 081d9692ce747..e18a07de9920a 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -263,6 +263,7 @@ static int event_function(void *info)
 static void event_function_call(struct perf_event *event, event_f func, void *data)
 {
 	struct perf_event_context *ctx = event->ctx;
+	struct perf_cpu_context *cpuctx = this_cpu_ptr(&perf_cpu_context);
 	struct task_struct *task = READ_ONCE(ctx->task); /* verified in event_function */
 	struct event_function_struct efs = {
 		.event = event,
@@ -291,22 +292,22 @@ static void event_function_call(struct perf_event *event, event_f func, void *da
 	if (!task_function_call(task, event_function, &efs))
 		return;
 
-	raw_spin_lock_irq(&ctx->lock);
+	perf_ctx_lock(cpuctx, ctx);
 	/*
 	 * Reload the task pointer, it might have been changed by
 	 * a concurrent perf_event_context_sched_out().
 	 */
 	task = ctx->task;
 	if (task == TASK_TOMBSTONE) {
-		raw_spin_unlock_irq(&ctx->lock);
+		perf_ctx_unlock(cpuctx, ctx);
 		return;
 	}
 	if (ctx->is_active) {
-		raw_spin_unlock_irq(&ctx->lock);
+		perf_ctx_unlock(cpuctx, ctx);
 		goto again;
 	}
 	func(event, NULL, ctx, data);
-	raw_spin_unlock_irq(&ctx->lock);
+	perf_ctx_unlock(cpuctx, ctx);
 }
 
 /*
-- 
2.43.0

[PATCH AUTOSEL 6.10 168/197] scsi: NCR5380: Initialize buffer for MSG IN and STATUS transfers

[Sasha Levin]

From: Finn Thain <fthain@linux-m68k.org>

[ Upstream commit 1c71065df2df693d208dd32758171c1dece66341 ]

Following an incomplete transfer in MSG IN phase, the driver would not
notice the problem and would make use of invalid data. Initialize 'tmp'
appropriately and bail out if no message was received. For STATUS phase,
preserve the existing status code unless a new value was transferred.

Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/52e02a8812ae1a2d810d7f9f7fd800c3ccc320c4.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/NCR5380.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index cea3a79d538e4..a99221ead3e00 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1807,8 +1807,11 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				return;
 			case PHASE_MSGIN:
 				len = 1;
+				tmp = 0xff;
 				data = &tmp;
 				NCR5380_transfer_pio(instance, &phase, &len, &data, 0);
+				if (tmp == 0xff)
+					break;
 				ncmd->message = tmp;
 
 				switch (tmp) {
@@ -1996,6 +1999,7 @@ static void NCR5380_information_transfer(struct Scsi_Host *instance)
 				break;
 			case PHASE_STATIN:
 				len = 1;
+				tmp = ncmd->status;
 				data = &tmp;
 				NCR5380_transfer_pio(instance, &phase, &len, &data, 0);
 				ncmd->status = tmp;
-- 
2.43.0

[PATCH AUTOSEL 6.10 169/197] drm/radeon/r100: Handle unknown family in r100_cp_init_microcode()

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit c6dbab46324b1742b50dc2fb5c1fee2c28129439 ]

With -Werror:

    In function ‘r100_cp_init_microcode’,
	inlined from ‘r100_cp_init’ at drivers/gpu/drm/radeon/r100.c:1136:7:
    include/linux/printk.h:465:44: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
      465 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__)
	  |                                            ^
    include/linux/printk.h:437:17: note: in definition of macro ‘printk_index_wrap’
      437 |                 _p_func(_fmt, ##__VA_ARGS__);                           \
	  |                 ^~~~~~~
    include/linux/printk.h:508:9: note: in expansion of macro ‘printk’
      508 |         printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
	  |         ^~~~~~
    drivers/gpu/drm/radeon/r100.c:1062:17: note: in expansion of macro ‘pr_err’
     1062 |                 pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name);
	  |                 ^~~~~~

Fix this by converting the if/else if/... construct into a proper
switch() statement with a default to handle the error case.

As a bonus, the generated code is ca. 100 bytes smaller (with gcc 11.4.0
targeting arm32).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/r100.c | 70 ++++++++++++++++++++++-------------
 1 file changed, 45 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 0b1e19345f43a..bfd42e3e161e9 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -1016,45 +1016,65 @@ static int r100_cp_init_microcode(struct radeon_device *rdev)
 
 	DRM_DEBUG_KMS("\n");
 
-	if ((rdev->family == CHIP_R100) || (rdev->family == CHIP_RV100) ||
-	    (rdev->family == CHIP_RV200) || (rdev->family == CHIP_RS100) ||
-	    (rdev->family == CHIP_RS200)) {
+	switch (rdev->family) {
+	case CHIP_R100:
+	case CHIP_RV100:
+	case CHIP_RV200:
+	case CHIP_RS100:
+	case CHIP_RS200:
 		DRM_INFO("Loading R100 Microcode\n");
 		fw_name = FIRMWARE_R100;
-	} else if ((rdev->family == CHIP_R200) ||
-		   (rdev->family == CHIP_RV250) ||
-		   (rdev->family == CHIP_RV280) ||
-		   (rdev->family == CHIP_RS300)) {
+		break;
+
+	case CHIP_R200:
+	case CHIP_RV250:
+	case CHIP_RV280:
+	case CHIP_RS300:
 		DRM_INFO("Loading R200 Microcode\n");
 		fw_name = FIRMWARE_R200;
-	} else if ((rdev->family == CHIP_R300) ||
-		   (rdev->family == CHIP_R350) ||
-		   (rdev->family == CHIP_RV350) ||
-		   (rdev->family == CHIP_RV380) ||
-		   (rdev->family == CHIP_RS400) ||
-		   (rdev->family == CHIP_RS480)) {
+		break;
+
+	case CHIP_R300:
+	case CHIP_R350:
+	case CHIP_RV350:
+	case CHIP_RV380:
+	case CHIP_RS400:
+	case CHIP_RS480:
 		DRM_INFO("Loading R300 Microcode\n");
 		fw_name = FIRMWARE_R300;
-	} else if ((rdev->family == CHIP_R420) ||
-		   (rdev->family == CHIP_R423) ||
-		   (rdev->family == CHIP_RV410)) {
+		break;
+
+	case CHIP_R420:
+	case CHIP_R423:
+	case CHIP_RV410:
 		DRM_INFO("Loading R400 Microcode\n");
 		fw_name = FIRMWARE_R420;
-	} else if ((rdev->family == CHIP_RS690) ||
-		   (rdev->family == CHIP_RS740)) {
+		break;
+
+	case CHIP_RS690:
+	case CHIP_RS740:
 		DRM_INFO("Loading RS690/RS740 Microcode\n");
 		fw_name = FIRMWARE_RS690;
-	} else if (rdev->family == CHIP_RS600) {
+		break;
+
+	case CHIP_RS600:
 		DRM_INFO("Loading RS600 Microcode\n");
 		fw_name = FIRMWARE_RS600;
-	} else if ((rdev->family == CHIP_RV515) ||
-		   (rdev->family == CHIP_R520) ||
-		   (rdev->family == CHIP_RV530) ||
-		   (rdev->family == CHIP_R580) ||
-		   (rdev->family == CHIP_RV560) ||
-		   (rdev->family == CHIP_RV570)) {
+		break;
+
+	case CHIP_RV515:
+	case CHIP_R520:
+	case CHIP_RV530:
+	case CHIP_R580:
+	case CHIP_RV560:
+	case CHIP_RV570:
 		DRM_INFO("Loading R500 Microcode\n");
 		fw_name = FIRMWARE_R520;
+		break;
+
+	default:
+		DRM_ERROR("Unsupported Radeon family %u\n", rdev->family);
+		return -EINVAL;
 	}
 
 	err = request_firmware(&rdev->me_fw, fw_name, rdev->dev);
-- 
2.43.0

[PATCH AUTOSEL 6.10 170/197] drm/amdgpu: Block MMR_READ IOCTL in reset

[Sasha Levin]

From: Victor Skvortsov <victor.skvortsov@amd.com>

[ Upstream commit 9e823f307074c0f82b5f6044943b0086e3079bed ]

Register access from userspace should be blocked until
reset is complete.

Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 43 ++++++++++++++++++-------
 1 file changed, 31 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index 977cde6d13626..6d4e774b6cedc 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -43,6 +43,7 @@
 #include "amdgpu_gem.h"
 #include "amdgpu_display.h"
 #include "amdgpu_ras.h"
+#include "amdgpu_reset.h"
 #include "amd_pcie.h"
 
 void amdgpu_unregister_gpu_instance(struct amdgpu_device *adev)
@@ -778,6 +779,7 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 				    ? -EFAULT : 0;
 	}
 	case AMDGPU_INFO_READ_MMR_REG: {
+		int ret = 0;
 		unsigned int n, alloc_size;
 		uint32_t *regs;
 		unsigned int se_num = (info->read_mmr_reg.instance >>
@@ -787,24 +789,37 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 				   AMDGPU_INFO_MMR_SH_INDEX_SHIFT) &
 				  AMDGPU_INFO_MMR_SH_INDEX_MASK;
 
+		if (!down_read_trylock(&adev->reset_domain->sem))
+			return -ENOENT;
+
 		/* set full masks if the userspace set all bits
 		 * in the bitfields
 		 */
-		if (se_num == AMDGPU_INFO_MMR_SE_INDEX_MASK)
+		if (se_num == AMDGPU_INFO_MMR_SE_INDEX_MASK) {
 			se_num = 0xffffffff;
-		else if (se_num >= AMDGPU_GFX_MAX_SE)
-			return -EINVAL;
-		if (sh_num == AMDGPU_INFO_MMR_SH_INDEX_MASK)
+		} else if (se_num >= AMDGPU_GFX_MAX_SE) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (sh_num == AMDGPU_INFO_MMR_SH_INDEX_MASK) {
 			sh_num = 0xffffffff;
-		else if (sh_num >= AMDGPU_GFX_MAX_SH_PER_SE)
-			return -EINVAL;
+		} else if (sh_num >= AMDGPU_GFX_MAX_SH_PER_SE) {
+			ret = -EINVAL;
+			goto out;
+		}
 
-		if (info->read_mmr_reg.count > 128)
-			return -EINVAL;
+		if (info->read_mmr_reg.count > 128) {
+			ret = -EINVAL;
+			goto out;
+		}
 
 		regs = kmalloc_array(info->read_mmr_reg.count, sizeof(*regs), GFP_KERNEL);
-		if (!regs)
-			return -ENOMEM;
+		if (!regs) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
 		alloc_size = info->read_mmr_reg.count * sizeof(*regs);
 
 		amdgpu_gfx_off_ctrl(adev, false);
@@ -816,13 +831,17 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 					      info->read_mmr_reg.dword_offset + i);
 				kfree(regs);
 				amdgpu_gfx_off_ctrl(adev, true);
-				return -EFAULT;
+				ret = -EFAULT;
+				goto out;
 			}
 		}
 		amdgpu_gfx_off_ctrl(adev, true);
 		n = copy_to_user(out, regs, min(size, alloc_size));
 		kfree(regs);
-		return n ? -EFAULT : 0;
+		ret = (n ? -EFAULT : 0);
+out:
+		up_read(&adev->reset_domain->sem);
+		return ret;
 	}
 	case AMDGPU_INFO_DEV_INFO: {
 		struct drm_amdgpu_info_device *dev_info;
-- 
2.43.0

[PATCH AUTOSEL 6.10 171/197] drm/amdgpu/gfx9: use rlc safe mode for soft recovery

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 3ec2ad7c34c412bd9264cd1ff235d0812be90e82 ]

Protect the MMIO access with safe mode.

Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index b278453cad6d4..d8d3d2c93d8ee 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -5701,7 +5701,9 @@ static void gfx_v9_0_ring_soft_recovery(struct amdgpu_ring *ring, unsigned vmid)
 	value = REG_SET_FIELD(value, SQ_CMD, MODE, 0x01);
 	value = REG_SET_FIELD(value, SQ_CMD, CHECK_VMID, 1);
 	value = REG_SET_FIELD(value, SQ_CMD, VM_ID, vmid);
+	amdgpu_gfx_rlc_enter_safe_mode(adev, 0);
 	WREG32_SOC15(GC, 0, mmSQ_CMD, value);
+	amdgpu_gfx_rlc_exit_safe_mode(adev, 0);
 }
 
 static void gfx_v9_0_set_gfx_eop_interrupt_state(struct amdgpu_device *adev,
-- 
2.43.0

[PATCH AUTOSEL 6.10 172/197] drm/amdgpu/gfx11: enter safe mode before touching CP_INT_CNTL

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit b5be054c585110b2c5c1b180136800e8c41c7bb4 ]

Need to enter safe mode before touching GC MMIO.

Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index 4ba8eb45ac174..0bcdcb2101577 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -4497,6 +4497,8 @@ static int gfx_v11_0_soft_reset(void *handle)
 	int r, i, j, k;
 	struct amdgpu_device *adev = (struct amdgpu_device *)handle;
 
+	gfx_v11_0_set_safe_mode(adev, 0);
+
 	tmp = RREG32_SOC15(GC, 0, regCP_INT_CNTL);
 	tmp = REG_SET_FIELD(tmp, CP_INT_CNTL, CMP_BUSY_INT_ENABLE, 0);
 	tmp = REG_SET_FIELD(tmp, CP_INT_CNTL, CNTX_BUSY_INT_ENABLE, 0);
@@ -4504,8 +4506,6 @@ static int gfx_v11_0_soft_reset(void *handle)
 	tmp = REG_SET_FIELD(tmp, CP_INT_CNTL, GFX_IDLE_INT_ENABLE, 0);
 	WREG32_SOC15(GC, 0, regCP_INT_CNTL, tmp);
 
-	gfx_v11_0_set_safe_mode(adev, 0);
-
 	mutex_lock(&adev->srbm_mutex);
 	for (i = 0; i < adev->gfx.mec.num_mec; ++i) {
 		for (j = 0; j < adev->gfx.mec.num_queue_per_pipe; j++) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 173/197] drm/xe: Use topology to determine page fault queue size

[Sasha Levin]

From: Stuart Summers <stuart.summers@intel.com>

[ Upstream commit 3338e4f90c143cf32f77d64f464cb7f2c2d24700 ]

Currently the page fault queue size is hard coded. However
the hardware supports faulting for each EU and each CS.
For some applications running on hardware with a large
number of EUs and CSs, this can result in an overflow of
the page fault queue.

Add a small calculation to determine the page fault queue
size based on the number of EUs and CSs in the platform as
detmined by fuses.

Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24d582a3b48c97793b8b6a402f34b4b469471636.1723862633.git.stuart.summers@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/xe/xe_gt_pagefault.c | 54 +++++++++++++++++++++-------
 drivers/gpu/drm/xe/xe_gt_types.h     |  9 +++--
 2 files changed, 49 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/xe/xe_gt_pagefault.c b/drivers/gpu/drm/xe/xe_gt_pagefault.c
index 67e8efcaa93f1..ee78b4e47dfcb 100644
--- a/drivers/gpu/drm/xe/xe_gt_pagefault.c
+++ b/drivers/gpu/drm/xe/xe_gt_pagefault.c
@@ -307,7 +307,7 @@ static bool get_pagefault(struct pf_queue *pf_queue, struct pagefault *pf)
 			PFD_VIRTUAL_ADDR_LO_SHIFT;
 
 		pf_queue->tail = (pf_queue->tail + PF_MSG_LEN_DW) %
-			PF_QUEUE_NUM_DW;
+			pf_queue->num_dw;
 		ret = true;
 	}
 	spin_unlock_irq(&pf_queue->lock);
@@ -319,7 +319,8 @@ static bool pf_queue_full(struct pf_queue *pf_queue)
 {
 	lockdep_assert_held(&pf_queue->lock);
 
-	return CIRC_SPACE(pf_queue->head, pf_queue->tail, PF_QUEUE_NUM_DW) <=
+	return CIRC_SPACE(pf_queue->head, pf_queue->tail,
+			  pf_queue->num_dw) <=
 		PF_MSG_LEN_DW;
 }
 
@@ -332,22 +333,23 @@ int xe_guc_pagefault_handler(struct xe_guc *guc, u32 *msg, u32 len)
 	u32 asid;
 	bool full;
 
-	/*
-	 * The below logic doesn't work unless PF_QUEUE_NUM_DW % PF_MSG_LEN_DW == 0
-	 */
-	BUILD_BUG_ON(PF_QUEUE_NUM_DW % PF_MSG_LEN_DW);
-
 	if (unlikely(len != PF_MSG_LEN_DW))
 		return -EPROTO;
 
 	asid = FIELD_GET(PFD_ASID, msg[1]);
 	pf_queue = gt->usm.pf_queue + (asid % NUM_PF_QUEUE);
 
+	/*
+	 * The below logic doesn't work unless PF_QUEUE_NUM_DW % PF_MSG_LEN_DW == 0
+	 */
+	xe_gt_assert(gt, !(pf_queue->num_dw % PF_MSG_LEN_DW));
+
 	spin_lock_irqsave(&pf_queue->lock, flags);
 	full = pf_queue_full(pf_queue);
 	if (!full) {
 		memcpy(pf_queue->data + pf_queue->head, msg, len * sizeof(u32));
-		pf_queue->head = (pf_queue->head + len) % PF_QUEUE_NUM_DW;
+		pf_queue->head = (pf_queue->head + len) %
+			pf_queue->num_dw;
 		queue_work(gt->usm.pf_wq, &pf_queue->worker);
 	} else {
 		drm_warn(&xe->drm, "PF Queue full, shouldn't be possible");
@@ -406,26 +408,54 @@ static void pagefault_fini(void *arg)
 {
 	struct xe_gt *gt = arg;
 	struct xe_device *xe = gt_to_xe(gt);
+	int i;
 
 	if (!xe->info.has_usm)
 		return;
 
 	destroy_workqueue(gt->usm.acc_wq);
 	destroy_workqueue(gt->usm.pf_wq);
+
+	for (i = 0; i < NUM_PF_QUEUE; ++i)
+		kfree(gt->usm.pf_queue[i].data);
+}
+
+static int xe_alloc_pf_queue(struct xe_gt *gt, struct pf_queue *pf_queue)
+{
+	xe_dss_mask_t all_dss;
+	int num_dss, num_eus;
+
+	bitmap_or(all_dss, gt->fuse_topo.g_dss_mask, gt->fuse_topo.c_dss_mask,
+		  XE_MAX_DSS_FUSE_BITS);
+
+	num_dss = bitmap_weight(all_dss, XE_MAX_DSS_FUSE_BITS);
+	num_eus = bitmap_weight(gt->fuse_topo.eu_mask_per_dss,
+				XE_MAX_EU_FUSE_BITS) * num_dss;
+
+	/* user can issue separate page faults per EU and per CS */
+	pf_queue->num_dw =
+		(num_eus + XE_NUM_HW_ENGINES) * PF_MSG_LEN_DW;
+
+	pf_queue->gt = gt;
+	pf_queue->data = kzalloc(pf_queue->num_dw, GFP_KERNEL);
+	spin_lock_init(&pf_queue->lock);
+	INIT_WORK(&pf_queue->worker, pf_queue_work_func);
+
+	return 0;
 }
 
 int xe_gt_pagefault_init(struct xe_gt *gt)
 {
 	struct xe_device *xe = gt_to_xe(gt);
-	int i;
+	int i, ret = 0;
 
 	if (!xe->info.has_usm)
 		return 0;
 
 	for (i = 0; i < NUM_PF_QUEUE; ++i) {
-		gt->usm.pf_queue[i].gt = gt;
-		spin_lock_init(&gt->usm.pf_queue[i].lock);
-		INIT_WORK(&gt->usm.pf_queue[i].worker, pf_queue_work_func);
+		ret = xe_alloc_pf_queue(gt, &gt->usm.pf_queue[i]);
+		if (ret)
+			return ret;
 	}
 	for (i = 0; i < NUM_ACC_QUEUE; ++i) {
 		gt->usm.acc_queue[i].gt = gt;
diff --git a/drivers/gpu/drm/xe/xe_gt_types.h b/drivers/gpu/drm/xe/xe_gt_types.h
index cfdc761ff7f46..2dbea50cd8f98 100644
--- a/drivers/gpu/drm/xe/xe_gt_types.h
+++ b/drivers/gpu/drm/xe/xe_gt_types.h
@@ -229,9 +229,14 @@ struct xe_gt {
 		struct pf_queue {
 			/** @usm.pf_queue.gt: back pointer to GT */
 			struct xe_gt *gt;
-#define PF_QUEUE_NUM_DW	128
 			/** @usm.pf_queue.data: data in the page fault queue */
-			u32 data[PF_QUEUE_NUM_DW];
+			u32 *data;
+			/**
+			 * @usm.pf_queue.num_dw: number of DWORDS in the page
+			 * fault queue. Dynamically calculated based on the number
+			 * of compute resources available.
+			 */
+			u32 num_dw;
 			/**
 			 * @usm.pf_queue.tail: tail pointer in DWs for page fault queue,
 			 * moved by worker which processes faults (consumer).
-- 
2.43.0

[PATCH AUTOSEL 6.10 174/197] drm/amd/pm: ensure the fw_info is not null before using it

[Sasha Levin]

From: Tim Huang <tim.huang@amd.com>

[ Upstream commit 186fb12e7a7b038c2710ceb2fb74068f1b5d55a4 ]

This resolves the dereference null return value warning
reported by Coverity.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/powerplay/hwmgr/processpptables.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/processpptables.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/processpptables.c
index 5794b64507bf9..56a2257525806 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/processpptables.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/processpptables.c
@@ -1185,6 +1185,8 @@ static int init_overdrive_limits(struct pp_hwmgr *hwmgr,
 	fw_info = smu_atom_get_data_table(hwmgr->adev,
 			 GetIndexIntoMasterTable(DATA, FirmwareInfo),
 			 &size, &frev, &crev);
+	PP_ASSERT_WITH_CODE(fw_info != NULL,
+			    "Missing firmware info!", return -EINVAL);
 
 	if ((fw_info->ucTableFormatRevision == 1)
 	    && (le16_to_cpu(fw_info->usStructureSize) >= sizeof(ATOM_FIRMWARE_INFO_V1_4)))
-- 
2.43.0

[PATCH AUTOSEL 6.10 175/197] drm/amdkfd: Check int source id for utcl2 poison event

[Sasha Levin]

From: Hawking Zhang <Hawking.Zhang@amd.com>

[ Upstream commit db6341a9168d2a24ded526277eeab29724d76e9d ]

Traditional utcl2 fault_status polling does not
work in SRIOV environment. The polling of fault
status register from guest side will be dropped
by hardware.

Driver should switch to check utcl2 interrupt
source id to identify utcl2 poison event. It is
set to 1 when poisoned data interrupts are
signaled.

v2: drop the unused local variable (Tao)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/amdkfd/kfd_int_process_v9.c    | 18 +-----------------
 drivers/gpu/drm/amd/amdkfd/soc15_int.h         |  1 +
 2 files changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_int_process_v9.c b/drivers/gpu/drm/amd/amdkfd/kfd_int_process_v9.c
index 78dde62fb04ad..c282f5253c445 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_int_process_v9.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_int_process_v9.c
@@ -414,25 +414,9 @@ static void event_interrupt_wq_v9(struct kfd_node *dev,
 		   client_id == SOC15_IH_CLIENTID_UTCL2) {
 		struct kfd_vm_fault_info info = {0};
 		uint16_t ring_id = SOC15_RING_ID_FROM_IH_ENTRY(ih_ring_entry);
-		uint32_t node_id = SOC15_NODEID_FROM_IH_ENTRY(ih_ring_entry);
-		uint32_t vmid_type = SOC15_VMID_TYPE_FROM_IH_ENTRY(ih_ring_entry);
-		int hub_inst = 0;
 		struct kfd_hsa_memory_exception_data exception_data;
 
-		/* gfxhub */
-		if (!vmid_type && dev->adev->gfx.funcs->ih_node_to_logical_xcc) {
-			hub_inst = dev->adev->gfx.funcs->ih_node_to_logical_xcc(dev->adev,
-				node_id);
-			if (hub_inst < 0)
-				hub_inst = 0;
-		}
-
-		/* mmhub */
-		if (vmid_type && client_id == SOC15_IH_CLIENTID_VMC)
-			hub_inst = node_id / 4;
-
-		if (amdgpu_amdkfd_ras_query_utcl2_poison_status(dev->adev,
-					hub_inst, vmid_type)) {
+		if (source_id == SOC15_INTSRC_VMC_UTCL2_POISON) {
 			event_interrupt_poison_consumption_v9(dev, pasid, client_id);
 			return;
 		}
diff --git a/drivers/gpu/drm/amd/amdkfd/soc15_int.h b/drivers/gpu/drm/amd/amdkfd/soc15_int.h
index 10138676f27fd..e5c0205f26181 100644
--- a/drivers/gpu/drm/amd/amdkfd/soc15_int.h
+++ b/drivers/gpu/drm/amd/amdkfd/soc15_int.h
@@ -29,6 +29,7 @@
 #define SOC15_INTSRC_CP_BAD_OPCODE	183
 #define SOC15_INTSRC_SQ_INTERRUPT_MSG	239
 #define SOC15_INTSRC_VMC_FAULT		0
+#define SOC15_INTSRC_VMC_UTCL2_POISON	1
 #define SOC15_INTSRC_SDMA_TRAP		224
 #define SOC15_INTSRC_SDMA_ECC		220
 #define SOC21_INTSRC_SDMA_TRAP		49
-- 
2.43.0

[PATCH AUTOSEL 6.10 176/197] drm/xe: Drop warn on xe_guc_pc_gucrc_disable in guc pc fini

[Sasha Levin]

From: Matthew Brost <matthew.brost@intel.com>

[ Upstream commit a323782567812ee925e9b7926445532c7afe331b ]

Not a big deal if CT is down as driver is unloading, no need to warn.

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jagmeet Randhawa <jagmeet.randhawa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820172958.1095143-4-matthew.brost@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/xe/xe_guc_pc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/xe/xe_guc_pc.c b/drivers/gpu/drm/xe/xe_guc_pc.c
index 23382ced4ea74..69f8b6fdaeaea 100644
--- a/drivers/gpu/drm/xe/xe_guc_pc.c
+++ b/drivers/gpu/drm/xe/xe_guc_pc.c
@@ -897,7 +897,7 @@ static void xe_guc_pc_fini(struct drm_device *drm, void *arg)
 	struct xe_guc_pc *pc = arg;
 
 	XE_WARN_ON(xe_force_wake_get(gt_to_fw(pc_to_gt(pc)), XE_FORCEWAKE_ALL));
-	XE_WARN_ON(xe_guc_pc_gucrc_disable(pc));
+	xe_guc_pc_gucrc_disable(pc);
 	XE_WARN_ON(xe_guc_pc_stop(pc));
 	xe_force_wake_put(gt_to_fw(pc_to_gt(pc)), XE_FORCEWAKE_ALL);
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 177/197] of/irq: Refer to actual buffer size in of_irq_parse_one()

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 39ab331ab5d377a18fbf5a0e0b228205edfcc7f4 ]

Replace two open-coded calculations of the buffer size by invocations of
sizeof() on the buffer itself, to make sure the code will always use the
actual buffer size.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/817c0b9626fd30790fc488c472a3398324cfcc0c.1724156125.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/irq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/of/irq.c b/drivers/of/irq.c
index 8fd63100ba8f0..d67b69cb84bfe 100644
--- a/drivers/of/irq.c
+++ b/drivers/of/irq.c
@@ -357,8 +357,8 @@ int of_irq_parse_one(struct device_node *device, int index, struct of_phandle_ar
 	addr = of_get_property(device, "reg", &addr_len);
 
 	/* Prevent out-of-bounds read in case of longer interrupt parent address size */
-	if (addr_len > (3 * sizeof(__be32)))
-		addr_len = 3 * sizeof(__be32);
+	if (addr_len > sizeof(addr_buf))
+		addr_len = sizeof(addr_buf);
 	if (addr)
 		memcpy(addr_buf, addr, addr_len);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 178/197] powerpc/pseries: Use correct data types from pseries_hp_errorlog struct

[Sasha Levin]

From: Haren Myneni <haren@linux.ibm.com>

[ Upstream commit b76e0d4215b6b622127ebcceaa7f603313ceaec4 ]

_be32 type is defined for some elements in pseries_hp_errorlog
struct but also used them u32 after be32_to_cpu() conversion.

Example: In handle_dlpar_errorlog()
hp_elog->_drc_u.drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);

And later assigned to u32 type
dlpar_cpu() - u32 drc_index = hp_elog->_drc_u.drc_index;

This incorrect usage is giving the following warnings and the
patch resolve these warnings with the correct assignment.

arch/powerpc/platforms/pseries/dlpar.c:398:53: sparse: sparse:
incorrect type in argument 1 (different base types) @@
expected unsigned int [usertype] drc_index @@
got restricted __be32 [usertype] drc_index @@
...
arch/powerpc/platforms/pseries/dlpar.c:418:43: sparse: sparse:
incorrect type in assignment (different base types) @@
expected restricted __be32 [usertype] drc_count @@
got unsigned int [usertype] @@

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408182142.wuIKqYae-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202408182302.o7QRO45S-lkp@intel.com/
Signed-off-by: Haren Myneni <haren@linux.ibm.com>

v3:
- Fix warnings from using incorrect data types in pseries_hp_errorlog
  struct
v2:
- Remove pr_info() and TODO comments
- Update more information in the commit logs

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240822025028.938332-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/dlpar.c          | 17 -----------------
 arch/powerpc/platforms/pseries/hotplug-cpu.c    |  2 +-
 arch/powerpc/platforms/pseries/hotplug-memory.c | 16 ++++++++--------
 arch/powerpc/platforms/pseries/pmem.c           |  2 +-
 4 files changed, 10 insertions(+), 27 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 47f8eabd1bee3..9873b916b2370 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -334,23 +334,6 @@ int handle_dlpar_errorlog(struct pseries_hp_errorlog *hp_elog)
 {
 	int rc;
 
-	/* pseries error logs are in BE format, convert to cpu type */
-	switch (hp_elog->id_type) {
-	case PSERIES_HP_ELOG_ID_DRC_COUNT:
-		hp_elog->_drc_u.drc_count =
-				be32_to_cpu(hp_elog->_drc_u.drc_count);
-		break;
-	case PSERIES_HP_ELOG_ID_DRC_INDEX:
-		hp_elog->_drc_u.drc_index =
-				be32_to_cpu(hp_elog->_drc_u.drc_index);
-		break;
-	case PSERIES_HP_ELOG_ID_DRC_IC:
-		hp_elog->_drc_u.ic.count =
-				be32_to_cpu(hp_elog->_drc_u.ic.count);
-		hp_elog->_drc_u.ic.index =
-				be32_to_cpu(hp_elog->_drc_u.ic.index);
-	}
-
 	switch (hp_elog->resource) {
 	case PSERIES_HP_ELOG_RESOURCE_MEM:
 		rc = dlpar_memory(hp_elog);
diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c
index e62835a12d73f..6838a0fcda296 100644
--- a/arch/powerpc/platforms/pseries/hotplug-cpu.c
+++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c
@@ -757,7 +757,7 @@ int dlpar_cpu(struct pseries_hp_errorlog *hp_elog)
 	u32 drc_index;
 	int rc;
 
-	drc_index = hp_elog->_drc_u.drc_index;
+	drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);
 
 	lock_device_hotplug();
 
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 3fe3ddb30c04b..38dc4f7c9296b 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -817,16 +817,16 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
 	case PSERIES_HP_ELOG_ACTION_ADD:
 		switch (hp_elog->id_type) {
 		case PSERIES_HP_ELOG_ID_DRC_COUNT:
-			count = hp_elog->_drc_u.drc_count;
+			count = be32_to_cpu(hp_elog->_drc_u.drc_count);
 			rc = dlpar_memory_add_by_count(count);
 			break;
 		case PSERIES_HP_ELOG_ID_DRC_INDEX:
-			drc_index = hp_elog->_drc_u.drc_index;
+			drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);
 			rc = dlpar_memory_add_by_index(drc_index);
 			break;
 		case PSERIES_HP_ELOG_ID_DRC_IC:
-			count = hp_elog->_drc_u.ic.count;
-			drc_index = hp_elog->_drc_u.ic.index;
+			count = be32_to_cpu(hp_elog->_drc_u.ic.count);
+			drc_index = be32_to_cpu(hp_elog->_drc_u.ic.index);
 			rc = dlpar_memory_add_by_ic(count, drc_index);
 			break;
 		default:
@@ -838,16 +838,16 @@ int dlpar_memory(struct pseries_hp_errorlog *hp_elog)
 	case PSERIES_HP_ELOG_ACTION_REMOVE:
 		switch (hp_elog->id_type) {
 		case PSERIES_HP_ELOG_ID_DRC_COUNT:
-			count = hp_elog->_drc_u.drc_count;
+			count = be32_to_cpu(hp_elog->_drc_u.drc_count);
 			rc = dlpar_memory_remove_by_count(count);
 			break;
 		case PSERIES_HP_ELOG_ID_DRC_INDEX:
-			drc_index = hp_elog->_drc_u.drc_index;
+			drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);
 			rc = dlpar_memory_remove_by_index(drc_index);
 			break;
 		case PSERIES_HP_ELOG_ID_DRC_IC:
-			count = hp_elog->_drc_u.ic.count;
-			drc_index = hp_elog->_drc_u.ic.index;
+			count = be32_to_cpu(hp_elog->_drc_u.ic.count);
+			drc_index = be32_to_cpu(hp_elog->_drc_u.ic.index);
 			rc = dlpar_memory_remove_by_ic(count, drc_index);
 			break;
 		default:
diff --git a/arch/powerpc/platforms/pseries/pmem.c b/arch/powerpc/platforms/pseries/pmem.c
index 3c290b9ed01b3..0f1d45f32e4a4 100644
--- a/arch/powerpc/platforms/pseries/pmem.c
+++ b/arch/powerpc/platforms/pseries/pmem.c
@@ -121,7 +121,7 @@ int dlpar_hp_pmem(struct pseries_hp_errorlog *hp_elog)
 		return -EINVAL;
 	}
 
-	drc_index = hp_elog->_drc_u.drc_index;
+	drc_index = be32_to_cpu(hp_elog->_drc_u.drc_index);
 
 	lock_device_hotplug();
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 179/197] ovl: fsync after metadata copy-up

[Sasha Levin]

From: Amir Goldstein <amir73il@gmail.com>

[ Upstream commit 7d6899fb69d25e1bc6f4700b7c1d92e6b608593d ]

For upper filesystems which do not use strict ordering of persisting
metadata changes (e.g. ubifs), when overlayfs file is modified for
the first time, copy up will create a copy of the lower file and
its parent directories in the upper layer. Permission lost of the
new upper parent directory was observed during power-cut stress test.

Fix by moving the fsync call to after metadata copy to make sure that the
metadata copied up directory and files persists to disk before renaming
from tmp to final destination.

With metacopy enabled, this change will hurt performance of workloads
such as chown -R, so we keep the legacy behavior of fsync only on copyup
of data.

Link: https://lore.kernel.org/linux-unionfs/CAOQ4uxj-pOvmw1-uXR3qVdqtLjSkwcR9nVKcNU_vC10Zyf2miQ@mail.gmail.com/
Reported-and-tested-by: Fei Lv <feilv@asrmicro.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/overlayfs/copy_up.c | 43 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 39 insertions(+), 4 deletions(-)

diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c
index a5ef2005a2cc5..051a802893a18 100644
--- a/fs/overlayfs/copy_up.c
+++ b/fs/overlayfs/copy_up.c
@@ -243,8 +243,24 @@ static int ovl_verify_area(loff_t pos, loff_t pos2, loff_t len, loff_t totlen)
 	return 0;
 }
 
+static int ovl_sync_file(struct path *path)
+{
+	struct file *new_file;
+	int err;
+
+	new_file = ovl_path_open(path, O_LARGEFILE | O_RDONLY);
+	if (IS_ERR(new_file))
+		return PTR_ERR(new_file);
+
+	err = vfs_fsync(new_file, 0);
+	fput(new_file);
+
+	return err;
+}
+
 static int ovl_copy_up_file(struct ovl_fs *ofs, struct dentry *dentry,
-			    struct file *new_file, loff_t len)
+			    struct file *new_file, loff_t len,
+			    bool datasync)
 {
 	struct path datapath;
 	struct file *old_file;
@@ -342,7 +358,8 @@ static int ovl_copy_up_file(struct ovl_fs *ofs, struct dentry *dentry,
 
 		len -= bytes;
 	}
-	if (!error && ovl_should_sync(ofs))
+	/* call fsync once, either now or later along with metadata */
+	if (!error && ovl_should_sync(ofs) && datasync)
 		error = vfs_fsync(new_file, 0);
 out_fput:
 	fput(old_file);
@@ -574,6 +591,7 @@ struct ovl_copy_up_ctx {
 	bool indexed;
 	bool metacopy;
 	bool metacopy_digest;
+	bool metadata_fsync;
 };
 
 static int ovl_link_up(struct ovl_copy_up_ctx *c)
@@ -634,7 +652,8 @@ static int ovl_copy_up_data(struct ovl_copy_up_ctx *c, const struct path *temp)
 	if (IS_ERR(new_file))
 		return PTR_ERR(new_file);
 
-	err = ovl_copy_up_file(ofs, c->dentry, new_file, c->stat.size);
+	err = ovl_copy_up_file(ofs, c->dentry, new_file, c->stat.size,
+			       !c->metadata_fsync);
 	fput(new_file);
 
 	return err;
@@ -701,6 +720,10 @@ static int ovl_copy_up_metadata(struct ovl_copy_up_ctx *c, struct dentry *temp)
 		err = ovl_set_attr(ofs, temp, &c->stat);
 	inode_unlock(temp->d_inode);
 
+	/* fsync metadata before moving it into upper dir */
+	if (!err && ovl_should_sync(ofs) && c->metadata_fsync)
+		err = ovl_sync_file(&upperpath);
+
 	return err;
 }
 
@@ -860,7 +883,8 @@ static int ovl_copy_up_tmpfile(struct ovl_copy_up_ctx *c)
 
 	temp = tmpfile->f_path.dentry;
 	if (!c->metacopy && c->stat.size) {
-		err = ovl_copy_up_file(ofs, c->dentry, tmpfile, c->stat.size);
+		err = ovl_copy_up_file(ofs, c->dentry, tmpfile, c->stat.size,
+				       !c->metadata_fsync);
 		if (err)
 			goto out_fput;
 	}
@@ -1135,6 +1159,17 @@ static int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry,
 	    !kgid_has_mapping(current_user_ns(), ctx.stat.gid))
 		return -EOVERFLOW;
 
+	/*
+	 * With metacopy disabled, we fsync after final metadata copyup, for
+	 * both regular files and directories to get atomic copyup semantics
+	 * on filesystems that do not use strict metadata ordering (e.g. ubifs).
+	 *
+	 * With metacopy enabled we want to avoid fsync on all meta copyup
+	 * that will hurt performance of workloads such as chown -R, so we
+	 * only fsync on data copyup as legacy behavior.
+	 */
+	ctx.metadata_fsync = !OVL_FS(dentry->d_sb)->config.metacopy &&
+			     (S_ISREG(ctx.stat.mode) || S_ISDIR(ctx.stat.mode));
 	ctx.metacopy = ovl_need_meta_copy_up(dentry, ctx.stat.mode, flags);
 
 	if (parent) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 180/197] drm/amdgpu/gfx11: use rlc safe mode for soft recovery

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit 3f2d35c325534c1b7ac5072173f0dc7ca969dec2 ]

Protect the MMIO access with safe mode.

Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
index 0bcdcb2101577..6b5cd0dcd25f4 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
@@ -5792,7 +5792,9 @@ static void gfx_v11_0_ring_soft_recovery(struct amdgpu_ring *ring,
 	value = REG_SET_FIELD(value, SQ_CMD, MODE, 0x01);
 	value = REG_SET_FIELD(value, SQ_CMD, CHECK_VMID, 1);
 	value = REG_SET_FIELD(value, SQ_CMD, VM_ID, vmid);
+	amdgpu_gfx_rlc_enter_safe_mode(adev, 0);
 	WREG32_SOC15(GC, 0, regSQ_CMD, value);
+	amdgpu_gfx_rlc_exit_safe_mode(adev, 0);
 }
 
 static void
-- 
2.43.0

[PATCH AUTOSEL 6.10 181/197] drm/amdgpu/gfx10: use rlc safe mode for soft recovery

[Sasha Levin]

From: Alex Deucher <alexander.deucher@amd.com>

[ Upstream commit ead60e9c4e29c8574cae1be4fe3af1d9a978fb0f ]

Protect the MMIO access with safe mode.

Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
index 536287ddd2ec1..6204336750c6a 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -8897,7 +8897,9 @@ static void gfx_v10_0_ring_soft_recovery(struct amdgpu_ring *ring,
 	value = REG_SET_FIELD(value, SQ_CMD, MODE, 0x01);
 	value = REG_SET_FIELD(value, SQ_CMD, CHECK_VMID, 1);
 	value = REG_SET_FIELD(value, SQ_CMD, VM_ID, vmid);
+	amdgpu_gfx_rlc_enter_safe_mode(adev, 0);
 	WREG32_SOC15(GC, 0, mmSQ_CMD, value);
+	amdgpu_gfx_rlc_exit_safe_mode(adev, 0);
 }
 
 static void
-- 
2.43.0

[PATCH AUTOSEL 6.10 182/197] platform/x86: lenovo-ymc: Ignore the 0x0 state

[Sasha Levin]

From: Gergo Koteles <soyer@irl.hu>

[ Upstream commit d9dca215708d32e7f88ac0591fbb187cbf368adb ]

While booting, Lenovo 14ARB7 reports 'lenovo-ymc: Unknown key 0 pressed'
warning. This is caused by lenovo_ymc_probe() calling lenovo_ymc_notify()
at probe time to get the initial tablet-mode-switch state and the key-code
lenovo_ymc_notify() reads from the firmware is not initialized at probe
time yet on the Lenovo 14ARB7.

The hardware/firmware does an ACPI notify on the WMI device itself when
it initializes the tablet-mode-switch state later on.

Add 0x0 YMC state to the sparse keymap to silence the warning.

Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/08ab73bb74c4ad448409f2ce707b1148874a05ce.1724340562.git.soyer@irl.hu
[hdegoede@redhat.com: Reword commit message]
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/lenovo-ymc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/lenovo-ymc.c b/drivers/platform/x86/lenovo-ymc.c
index e0bbd6a14a89c..bd9f95404c7cb 100644
--- a/drivers/platform/x86/lenovo-ymc.c
+++ b/drivers/platform/x86/lenovo-ymc.c
@@ -43,6 +43,8 @@ struct lenovo_ymc_private {
 };
 
 static const struct key_entry lenovo_ymc_keymap[] = {
+	/* Ignore the uninitialized state */
+	{ KE_IGNORE, 0x00 },
 	/* Laptop */
 	{ KE_SW, 0x01, { .sw = { SW_TABLET_MODE, 0 } } },
 	/* Tablet */
-- 
2.43.0

[PATCH AUTOSEL 6.10 183/197] tools/hv: Add memory allocation check in hv_fcopy_start

[Sasha Levin]

From: Zhu Jun <zhujun2@cmss.chinamobile.com>

[ Upstream commit 94e86b174d103d941b4afc4f016af8af9e5352fa ]

Added error handling for memory allocation failures
of file_name and path_name.

Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240906091333.11419-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240906091333.11419-1-zhujun2@cmss.chinamobile.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/hv/hv_fcopy_uio_daemon.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/tools/hv/hv_fcopy_uio_daemon.c b/tools/hv/hv_fcopy_uio_daemon.c
index 3ce316cc9f970..7a00f3066a980 100644
--- a/tools/hv/hv_fcopy_uio_daemon.c
+++ b/tools/hv/hv_fcopy_uio_daemon.c
@@ -296,6 +296,13 @@ static int hv_fcopy_start(struct hv_start_fcopy *smsg_in)
 	file_name = (char *)malloc(file_size * sizeof(char));
 	path_name = (char *)malloc(path_size * sizeof(char));
 
+	if (!file_name || !path_name) {
+		free(file_name);
+		free(path_name);
+		syslog(LOG_ERR, "Can't allocate memory for file name and/or path name");
+		return HV_E_FAIL;
+	}
+
 	wcstoutf8(file_name, (__u16 *)in_file_name, file_size);
 	wcstoutf8(path_name, (__u16 *)in_path_name, path_size);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 184/197] HID: i2c-hid: ensure various commands do not interfere with each other

[Sasha Levin]

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>

[ Upstream commit b4ed18a3d56eabd18cfd9841ff05111e3cfbe8f9 ]

i2c-hid uses 2 shared buffers: command and "raw" input buffer for
sending requests to peripherals and read data from peripherals when
executing variety of commands. Such commands include reading of HID
registers, requesting particular power mode, getting and setting
reports and so on. Because all such requests use the same 2 buffers
they should not execute simultaneously.

Fix this by introducing "cmd_lock" mutex and acquire it whenever
we needs to access ihid->cmdbuf or idid->rawbuf.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/i2c-hid/i2c-hid-core.c | 42 +++++++++++++++++++-----------
 1 file changed, 27 insertions(+), 15 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 632eaf9e11a6b..2f8a9d3f1e861 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -105,6 +105,7 @@ struct i2c_hid {
 
 	wait_queue_head_t	wait;		/* For waiting the interrupt */
 
+	struct mutex		cmd_lock;	/* protects cmdbuf and rawbuf */
 	struct mutex		reset_lock;
 
 	struct i2chid_ops	*ops;
@@ -220,6 +221,8 @@ static int i2c_hid_xfer(struct i2c_hid *ihid,
 static int i2c_hid_read_register(struct i2c_hid *ihid, __le16 reg,
 				 void *buf, size_t len)
 {
+	guard(mutex)(&ihid->cmd_lock);
+
 	*(__le16 *)ihid->cmdbuf = reg;
 
 	return i2c_hid_xfer(ihid, ihid->cmdbuf, sizeof(__le16), buf, len);
@@ -252,6 +255,8 @@ static int i2c_hid_get_report(struct i2c_hid *ihid,
 
 	i2c_hid_dbg(ihid, "%s\n", __func__);
 
+	guard(mutex)(&ihid->cmd_lock);
+
 	/* Command register goes first */
 	*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
 	length += sizeof(__le16);
@@ -342,6 +347,8 @@ static int i2c_hid_set_or_send_report(struct i2c_hid *ihid,
 	if (!do_set && le16_to_cpu(ihid->hdesc.wMaxOutputLength) == 0)
 		return -ENOSYS;
 
+	guard(mutex)(&ihid->cmd_lock);
+
 	if (do_set) {
 		/* Command register goes first */
 		*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
@@ -384,6 +391,8 @@ static int i2c_hid_set_power_command(struct i2c_hid *ihid, int power_state)
 {
 	size_t length;
 
+	guard(mutex)(&ihid->cmd_lock);
+
 	/* SET_POWER uses command register */
 	*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
 	length = sizeof(__le16);
@@ -440,25 +449,27 @@ static int i2c_hid_start_hwreset(struct i2c_hid *ihid)
 	if (ret)
 		return ret;
 
-	/* Prepare reset command. Command register goes first. */
-	*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
-	length += sizeof(__le16);
-	/* Next is RESET command itself */
-	length += i2c_hid_encode_command(ihid->cmdbuf + length,
-					 I2C_HID_OPCODE_RESET, 0, 0);
+	scoped_guard(mutex, &ihid->cmd_lock) {
+		/* Prepare reset command. Command register goes first. */
+		*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
+		length += sizeof(__le16);
+		/* Next is RESET command itself */
+		length += i2c_hid_encode_command(ihid->cmdbuf + length,
+						 I2C_HID_OPCODE_RESET, 0, 0);
 
-	set_bit(I2C_HID_RESET_PENDING, &ihid->flags);
+		set_bit(I2C_HID_RESET_PENDING, &ihid->flags);
 
-	ret = i2c_hid_xfer(ihid, ihid->cmdbuf, length, NULL, 0);
-	if (ret) {
-		dev_err(&ihid->client->dev,
-			"failed to reset device: %d\n", ret);
-		goto err_clear_reset;
-	}
+		ret = i2c_hid_xfer(ihid, ihid->cmdbuf, length, NULL, 0);
+		if (ret) {
+			dev_err(&ihid->client->dev,
+				"failed to reset device: %d\n", ret);
+			break;
+		}
 
-	return 0;
+		return 0;
+	}
 
-err_clear_reset:
+	/* Clean up if sending reset command failed */
 	clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
 	i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
 	return ret;
@@ -1200,6 +1211,7 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
 	ihid->is_panel_follower = drm_is_panel_follower(&client->dev);
 
 	init_waitqueue_head(&ihid->wait);
+	mutex_init(&ihid->cmd_lock);
 	mutex_init(&ihid->reset_lock);
 	INIT_WORK(&ihid->panel_follower_prepare_work, ihid_core_panel_prepare_work);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 185/197] ksmbd: add refcnt to ksmbd_conn struct

[Sasha Levin]

From: Namjae Jeon <linkinjeon@kernel.org>

[ Upstream commit ee426bfb9d09b29987369b897fe9b6485ac2be27 ]

When sending an oplock break request, opinfo->conn is used,
But freed ->conn can be used on multichannel.
This patch add a reference count to the ksmbd_conn struct
so that it can be freed when it is no longer used.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/server/connection.c |  4 ++-
 fs/smb/server/connection.h |  1 +
 fs/smb/server/oplock.c     | 55 +++++++++++---------------------------
 fs/smb/server/vfs_cache.c  |  3 +++
 4 files changed, 23 insertions(+), 40 deletions(-)

diff --git a/fs/smb/server/connection.c b/fs/smb/server/connection.c
index 7889df8112b4e..cac80e7bfefc7 100644
--- a/fs/smb/server/connection.c
+++ b/fs/smb/server/connection.c
@@ -39,7 +39,8 @@ void ksmbd_conn_free(struct ksmbd_conn *conn)
 	xa_destroy(&conn->sessions);
 	kvfree(conn->request_buf);
 	kfree(conn->preauth_info);
-	kfree(conn);
+	if (atomic_dec_and_test(&conn->refcnt))
+		kfree(conn);
 }
 
 /**
@@ -68,6 +69,7 @@ struct ksmbd_conn *ksmbd_conn_alloc(void)
 		conn->um = NULL;
 	atomic_set(&conn->req_running, 0);
 	atomic_set(&conn->r_count, 0);
+	atomic_set(&conn->refcnt, 1);
 	conn->total_credits = 1;
 	conn->outstanding_credits = 0;
 
diff --git a/fs/smb/server/connection.h b/fs/smb/server/connection.h
index b93e5437793e0..82343afc8d049 100644
--- a/fs/smb/server/connection.h
+++ b/fs/smb/server/connection.h
@@ -106,6 +106,7 @@ struct ksmbd_conn {
 	bool				signing_negotiated;
 	__le16				signing_algorithm;
 	bool				binding;
+	atomic_t			refcnt;
 };
 
 struct ksmbd_conn_ops {
diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c
index e546ffa57b55a..8ee86478287f9 100644
--- a/fs/smb/server/oplock.c
+++ b/fs/smb/server/oplock.c
@@ -51,6 +51,7 @@ static struct oplock_info *alloc_opinfo(struct ksmbd_work *work,
 	init_waitqueue_head(&opinfo->oplock_brk);
 	atomic_set(&opinfo->refcount, 1);
 	atomic_set(&opinfo->breaking_cnt, 0);
+	atomic_inc(&opinfo->conn->refcnt);
 
 	return opinfo;
 }
@@ -124,6 +125,8 @@ static void free_opinfo(struct oplock_info *opinfo)
 {
 	if (opinfo->is_lease)
 		free_lease(opinfo);
+	if (opinfo->conn && atomic_dec_and_test(&opinfo->conn->refcnt))
+		kfree(opinfo->conn);
 	kfree(opinfo);
 }
 
@@ -163,9 +166,7 @@ static struct oplock_info *opinfo_get_list(struct ksmbd_inode *ci)
 		    !atomic_inc_not_zero(&opinfo->refcount))
 			opinfo = NULL;
 		else {
-			atomic_inc(&opinfo->conn->r_count);
 			if (ksmbd_conn_releasing(opinfo->conn)) {
-				atomic_dec(&opinfo->conn->r_count);
 				atomic_dec(&opinfo->refcount);
 				opinfo = NULL;
 			}
@@ -177,26 +178,11 @@ static struct oplock_info *opinfo_get_list(struct ksmbd_inode *ci)
 	return opinfo;
 }
 
-static void opinfo_conn_put(struct oplock_info *opinfo)
+void opinfo_put(struct oplock_info *opinfo)
 {
-	struct ksmbd_conn *conn;
-
 	if (!opinfo)
 		return;
 
-	conn = opinfo->conn;
-	/*
-	 * Checking waitqueue to dropping pending requests on
-	 * disconnection. waitqueue_active is safe because it
-	 * uses atomic operation for condition.
-	 */
-	if (!atomic_dec_return(&conn->r_count) && waitqueue_active(&conn->r_count_q))
-		wake_up(&conn->r_count_q);
-	opinfo_put(opinfo);
-}
-
-void opinfo_put(struct oplock_info *opinfo)
-{
 	if (!atomic_dec_and_test(&opinfo->refcount))
 		return;
 
@@ -1127,14 +1113,11 @@ void smb_send_parent_lease_break_noti(struct ksmbd_file *fp,
 			if (!atomic_inc_not_zero(&opinfo->refcount))
 				continue;
 
-			atomic_inc(&opinfo->conn->r_count);
-			if (ksmbd_conn_releasing(opinfo->conn)) {
-				atomic_dec(&opinfo->conn->r_count);
+			if (ksmbd_conn_releasing(opinfo->conn))
 				continue;
-			}
 
 			oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE);
-			opinfo_conn_put(opinfo);
+			opinfo_put(opinfo);
 		}
 	}
 	up_read(&p_ci->m_lock);
@@ -1167,13 +1150,10 @@ void smb_lazy_parent_lease_break_close(struct ksmbd_file *fp)
 			if (!atomic_inc_not_zero(&opinfo->refcount))
 				continue;
 
-			atomic_inc(&opinfo->conn->r_count);
-			if (ksmbd_conn_releasing(opinfo->conn)) {
-				atomic_dec(&opinfo->conn->r_count);
+			if (ksmbd_conn_releasing(opinfo->conn))
 				continue;
-			}
 			oplock_break(opinfo, SMB2_OPLOCK_LEVEL_NONE);
-			opinfo_conn_put(opinfo);
+			opinfo_put(opinfo);
 		}
 	}
 	up_read(&p_ci->m_lock);
@@ -1252,7 +1232,7 @@ int smb_grant_oplock(struct ksmbd_work *work, int req_op_level, u64 pid,
 	prev_opinfo = opinfo_get_list(ci);
 	if (!prev_opinfo ||
 	    (prev_opinfo->level == SMB2_OPLOCK_LEVEL_NONE && lctx)) {
-		opinfo_conn_put(prev_opinfo);
+		opinfo_put(prev_opinfo);
 		goto set_lev;
 	}
 	prev_op_has_lease = prev_opinfo->is_lease;
@@ -1262,19 +1242,19 @@ int smb_grant_oplock(struct ksmbd_work *work, int req_op_level, u64 pid,
 	if (share_ret < 0 &&
 	    prev_opinfo->level == SMB2_OPLOCK_LEVEL_EXCLUSIVE) {
 		err = share_ret;
-		opinfo_conn_put(prev_opinfo);
+		opinfo_put(prev_opinfo);
 		goto err_out;
 	}
 
 	if (prev_opinfo->level != SMB2_OPLOCK_LEVEL_BATCH &&
 	    prev_opinfo->level != SMB2_OPLOCK_LEVEL_EXCLUSIVE) {
-		opinfo_conn_put(prev_opinfo);
+		opinfo_put(prev_opinfo);
 		goto op_break_not_needed;
 	}
 
 	list_add(&work->interim_entry, &prev_opinfo->interim_list);
 	err = oplock_break(prev_opinfo, SMB2_OPLOCK_LEVEL_II);
-	opinfo_conn_put(prev_opinfo);
+	opinfo_put(prev_opinfo);
 	if (err == -ENOENT)
 		goto set_lev;
 	/* Check all oplock was freed by close */
@@ -1337,14 +1317,14 @@ static void smb_break_all_write_oplock(struct ksmbd_work *work,
 		return;
 	if (brk_opinfo->level != SMB2_OPLOCK_LEVEL_BATCH &&
 	    brk_opinfo->level != SMB2_OPLOCK_LEVEL_EXCLUSIVE) {
-		opinfo_conn_put(brk_opinfo);
+		opinfo_put(brk_opinfo);
 		return;
 	}
 
 	brk_opinfo->open_trunc = is_trunc;
 	list_add(&work->interim_entry, &brk_opinfo->interim_list);
 	oplock_break(brk_opinfo, SMB2_OPLOCK_LEVEL_II);
-	opinfo_conn_put(brk_opinfo);
+	opinfo_put(brk_opinfo);
 }
 
 /**
@@ -1376,11 +1356,8 @@ void smb_break_all_levII_oplock(struct ksmbd_work *work, struct ksmbd_file *fp,
 		if (!atomic_inc_not_zero(&brk_op->refcount))
 			continue;
 
-		atomic_inc(&brk_op->conn->r_count);
-		if (ksmbd_conn_releasing(brk_op->conn)) {
-			atomic_dec(&brk_op->conn->r_count);
+		if (ksmbd_conn_releasing(brk_op->conn))
 			continue;
-		}
 
 		rcu_read_unlock();
 		if (brk_op->is_lease && (brk_op->o_lease->state &
@@ -1411,7 +1388,7 @@ void smb_break_all_levII_oplock(struct ksmbd_work *work, struct ksmbd_file *fp,
 		brk_op->open_trunc = is_trunc;
 		oplock_break(brk_op, SMB2_OPLOCK_LEVEL_NONE);
 next:
-		opinfo_conn_put(brk_op);
+		opinfo_put(brk_op);
 		rcu_read_lock();
 	}
 	rcu_read_unlock();
diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c
index 8b2e37c8716ed..271a23abc82fd 100644
--- a/fs/smb/server/vfs_cache.c
+++ b/fs/smb/server/vfs_cache.c
@@ -710,6 +710,8 @@ static bool session_fd_check(struct ksmbd_tree_connect *tcon,
 	list_for_each_entry_rcu(op, &ci->m_op_list, op_entry) {
 		if (op->conn != conn)
 			continue;
+		if (op->conn && atomic_dec_and_test(&op->conn->refcnt))
+			kfree(op->conn);
 		op->conn = NULL;
 	}
 	up_write(&ci->m_lock);
@@ -807,6 +809,7 @@ int ksmbd_reopen_durable_fd(struct ksmbd_work *work, struct ksmbd_file *fp)
 		if (op->conn)
 			continue;
 		op->conn = fp->conn;
+		atomic_inc(&op->conn->refcnt);
 	}
 	up_write(&ci->m_lock);
 
-- 
2.43.0

[PATCH AUTOSEL 6.10 186/197] platform/mellanox: mlxbf-pmc: fix lockdep warning

[Sasha Levin]

From: Luiz Capitulino <luizcap@redhat.com>

[ Upstream commit 305790dd91057a3f7497c9d128614a4f8486b62b ]

It seems the mlxbf-pmc driver is missing initializing sysfs attributes
which causes the warning below when CONFIG_LOCKDEP and
CONFIG_DEBUG_LOCK_ALLOC are enabled. This commit fixes it.

[  155.380843] BUG: key ffff470f45dfa6d8 has not been registered!
[  155.386749] ------------[ cut here ]------------
[  155.391361] DEBUG_LOCKS_WARN_ON(1)
[  155.391381] WARNING: CPU: 4 PID: 1828 at kernel/locking/lockdep.c:4894 lockdep_init_map_type+0x1d0/0x288
[  155.404254] Modules linked in: mlxbf_pmc(+) xfs libcrc32c mmc_block mlx5_core crct10dif_ce mlxfw ghash_ce virtio_net tls net_failover sha2
_ce failover psample sha256_arm64 dw_mmc_bluefield pci_hyperv_intf sha1_ce dw_mmc_pltfm sbsa_gwdt dw_mmc micrel mmc_core nfit i2c_mlxbf pwr_m
lxbf gpio_generic libnvdimm mlxbf_tmfifo mlxbf_gige dm_mirror dm_region_hash dm_log dm_mod
[  155.436786] CPU: 4 UID: 0 PID: 1828 Comm: modprobe Kdump: loaded Not tainted 6.11.0-rc7-rep1+ #1
[  155.445562] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.8.0.13249 Aug  7 2024
[  155.455463] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  155.462413] pc : lockdep_init_map_type+0x1d0/0x288
[  155.467196] lr : lockdep_init_map_type+0x1d0/0x288
[  155.471976] sp : ffff80008a1734e0
[  155.475279] x29: ffff80008a1734e0 x28: ffff470f45df0240 x27: 00000000ffffee4b
[  155.482406] x26: 00000000000011b4 x25: 0000000000000000 x24: 0000000000000000
[  155.489532] x23: ffff470f45dfa6d8 x22: 0000000000000000 x21: ffffd54ef6bea000
[  155.496659] x20: ffff470f45dfa6d8 x19: ffff470f49cdc638 x18: ffffffffffffffff
[  155.503784] x17: 2f30303a31444642 x16: ffffd54ef48a65e8 x15: ffff80010a172fe7
[  155.510911] x14: 0000000000000000 x13: 284e4f5f4e524157 x12: 5f534b434f4c5f47
[  155.518037] x11: 0000000000000001 x10: 0000000000000001 x9 : ffffd54ef3f48a14
[  155.525163] x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 00000000002bffa8
[  155.532289] x5 : ffff4712bdcb6088 x4 : 0000000000000000 x3 : 0000000000000027
[  155.539416] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff470f43e5be00
[  155.546542] Call trace:
[  155.548976]  lockdep_init_map_type+0x1d0/0x288
[  155.553410]  __kernfs_create_file+0x80/0x138
[  155.557673]  sysfs_add_file_mode_ns+0x94/0x150
[  155.562106]  create_files+0xb0/0x248
[  155.565672]  internal_create_group+0x10c/0x328
[  155.570105]  internal_create_groups.part.0+0x50/0xc8
[  155.575060]  sysfs_create_groups+0x20/0x38
[  155.579146]  device_add_attrs+0x1b8/0x228
[  155.583146]  device_add+0x2a4/0x690
[  155.586625]  device_register+0x24/0x38
[  155.590362]  __hwmon_device_register+0x1e0/0x3c8
[  155.594969]  devm_hwmon_device_register_with_groups+0x78/0xe0
[  155.600703]  mlxbf_pmc_probe+0x224/0x3a0 [mlxbf_pmc]
[  155.605669]  platform_probe+0x6c/0xe0
[  155.609320]  really_probe+0xc4/0x398
[  155.612887]  __driver_probe_device+0x80/0x168
[  155.617233]  driver_probe_device+0x44/0x120
[  155.621405]  __driver_attach+0xf4/0x200
[  155.625230]  bus_for_each_dev+0x7c/0xe8
[  155.629055]  driver_attach+0x28/0x38
[  155.632619]  bus_add_driver+0x110/0x238
[  155.636445]  driver_register+0x64/0x128
[  155.640270]  __platform_driver_register+0x2c/0x40
[  155.644965]  pmc_driver_init+0x24/0xff8 [mlxbf_pmc]
[  155.649833]  do_one_initcall+0x70/0x3d0
[  155.653660]  do_init_module+0x64/0x220
[  155.657400]  load_module+0x628/0x6a8
[  155.660964]  init_module_from_file+0x8c/0xd8
[  155.665222]  idempotent_init_module+0x194/0x290
[  155.669742]  __arm64_sys_finit_module+0x6c/0xd8
[  155.674261]  invoke_syscall.constprop.0+0x74/0xd0
[  155.678957]  do_el0_svc+0xb4/0xd0
[  155.682262]  el0_svc+0x5c/0x248
[  155.685394]  el0t_64_sync_handler+0x134/0x150
[  155.689739]  el0t_64_sync+0x17c/0x180
[  155.693390] irq event stamp: 6407
[  155.696693] hardirqs last  enabled at (6407): [<ffffd54ef3f48564>] console_unlock+0x154/0x1b8
[  155.705207] hardirqs last disabled at (6406): [<ffffd54ef3f485ac>] console_unlock+0x19c/0x1b8
[  155.713719] softirqs last  enabled at (6404): [<ffffd54ef3e9740c>] handle_softirqs+0x4f4/0x518
[  155.722320] softirqs last disabled at (6395): [<ffffd54ef3df0160>] __do_softirq+0x18/0x20
[  155.730484] ---[ end trace 0000000000000000 ]---

Signed-off-by: Luiz Capitulino <luizcap@redhat.com>
Link: https://lore.kernel.org/r/20240912190532.377097-1-luizcap@redhat.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mellanox/mlxbf-pmc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c
index 4ed9c7fd2b62a..9d18dfca6a673 100644
--- a/drivers/platform/mellanox/mlxbf-pmc.c
+++ b/drivers/platform/mellanox/mlxbf-pmc.c
@@ -1774,6 +1774,7 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
 
 	/* "event_list" sysfs to list events supported by the block */
 	attr = &pmc->block[blk_num].attr_event_list;
+	sysfs_attr_init(&attr->dev_attr.attr);
 	attr->dev_attr.attr.mode = 0444;
 	attr->dev_attr.show = mlxbf_pmc_event_list_show;
 	attr->nr = blk_num;
@@ -1787,6 +1788,7 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
 	if (strstr(pmc->block_name[blk_num], "l3cache") ||
 	    ((pmc->block[blk_num].type == MLXBF_PMC_TYPE_CRSPACE))) {
 		attr = &pmc->block[blk_num].attr_enable;
+		sysfs_attr_init(&attr->dev_attr.attr);
 		attr->dev_attr.attr.mode = 0644;
 		attr->dev_attr.show = mlxbf_pmc_enable_show;
 		attr->dev_attr.store = mlxbf_pmc_enable_store;
@@ -1814,6 +1816,7 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
 	/* "eventX" and "counterX" sysfs to program and read counter values */
 	for (j = 0; j < pmc->block[blk_num].counters; ++j) {
 		attr = &pmc->block[blk_num].attr_counter[j];
+		sysfs_attr_init(&attr->dev_attr.attr);
 		attr->dev_attr.attr.mode = 0644;
 		attr->dev_attr.show = mlxbf_pmc_counter_show;
 		attr->dev_attr.store = mlxbf_pmc_counter_store;
@@ -1826,6 +1829,7 @@ static int mlxbf_pmc_init_perftype_counter(struct device *dev, unsigned int blk_
 		attr = NULL;
 
 		attr = &pmc->block[blk_num].attr_event[j];
+		sysfs_attr_init(&attr->dev_attr.attr);
 		attr->dev_attr.attr.mode = 0644;
 		attr->dev_attr.show = mlxbf_pmc_event_show;
 		attr->dev_attr.store = mlxbf_pmc_event_store;
@@ -1861,6 +1865,7 @@ static int mlxbf_pmc_init_perftype_reg(struct device *dev, unsigned int blk_num)
 	while (count > 0) {
 		--count;
 		attr = &pmc->block[blk_num].attr_event[count];
+		sysfs_attr_init(&attr->dev_attr.attr);
 		attr->dev_attr.attr.mode = 0644;
 		attr->dev_attr.show = mlxbf_pmc_counter_show;
 		attr->dev_attr.store = mlxbf_pmc_counter_store;
-- 
2.43.0

[PATCH AUTOSEL 6.10 187/197] platform/x86: x86-android-tablets: Adjust Xiaomi Pad 2 bottom bezel touch buttons LED

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit df40a23cc34c200cfde559eda7ca540f3ae7bd9e ]

The "input-events" LED trigger used to turn on the backlight LEDs had to
be rewritten to use led_trigger_register_simple() + led_trigger_event()
to fix a serious locking issue.

This means it no longer supports using blink_brightness to set a per LED
brightness for the trigger and it no longer sets LED_CORE_SUSPENDRESUME.

Adjust the MiPad 2 bottom bezel touch buttons LED class device to match:

1. Make LED_FULL the maximum brightness to fix the LED brightness
   being very low when on.
2. Set flags = LED_CORE_SUSPENDRESUME.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240916090255.35548-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/x86-android-tablets/other.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/platform/x86/x86-android-tablets/other.c b/drivers/platform/x86/x86-android-tablets/other.c
index eb0e55c69dfed..2549c348c8825 100644
--- a/drivers/platform/x86/x86-android-tablets/other.c
+++ b/drivers/platform/x86/x86-android-tablets/other.c
@@ -670,7 +670,7 @@ static const struct software_node *ktd2026_node_group[] = {
  * is controlled by the "pwm_soc_lpss_2" PWM output.
  */
 #define XIAOMI_MIPAD2_LED_PERIOD_NS		19200
-#define XIAOMI_MIPAD2_LED_DEFAULT_DUTY		 6000 /* From Android kernel */
+#define XIAOMI_MIPAD2_LED_MAX_DUTY_NS		 6000 /* From Android kernel */
 
 static struct pwm_device *xiaomi_mipad2_led_pwm;
 
@@ -679,7 +679,7 @@ static int xiaomi_mipad2_brightness_set(struct led_classdev *led_cdev,
 {
 	struct pwm_state state = {
 		.period = XIAOMI_MIPAD2_LED_PERIOD_NS,
-		.duty_cycle = val,
+		.duty_cycle = XIAOMI_MIPAD2_LED_MAX_DUTY_NS * val / LED_FULL,
 		/* Always set PWM enabled to avoid the pin floating */
 		.enabled = true,
 	};
@@ -701,11 +701,11 @@ static int __init xiaomi_mipad2_init(struct device *dev)
 		return -ENOMEM;
 
 	led_cdev->name = "mipad2:white:touch-buttons-backlight";
-	led_cdev->max_brightness = XIAOMI_MIPAD2_LED_PERIOD_NS;
-	/* "input-events" trigger uses blink_brightness */
-	led_cdev->blink_brightness = XIAOMI_MIPAD2_LED_DEFAULT_DUTY;
+	led_cdev->max_brightness = LED_FULL;
 	led_cdev->default_trigger = "input-events";
 	led_cdev->brightness_set_blocking = xiaomi_mipad2_brightness_set;
+	/* Turn LED off during suspend */
+	led_cdev->flags = LED_CORE_SUSPENDRESUME;
 
 	ret = devm_led_classdev_register(dev, led_cdev);
 	if (ret)
-- 
2.43.0

[PATCH AUTOSEL 6.10 188/197] ext4: don't set SB_RDONLY after filesystem errors

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit d3476f3dad4ad68ae5f6b008ea6591d1520da5d8 ]

When the filesystem is mounted with errors=remount-ro, we were setting
SB_RDONLY flag to stop all filesystem modifications. We knew this misses
proper locking (sb->s_umount) and does not go through proper filesystem
remount procedure but it has been the way this worked since early ext2
days and it was good enough for catastrophic situation damage
mitigation. Recently, syzbot has found a way (see link) to trigger
warnings in filesystem freezing because the code got confused by
SB_RDONLY changing under its hands. Since these days we set
EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all
filesystem modifications, modifying SB_RDONLY shouldn't be needed. So
stop doing that.

Link: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com
Reported-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20240805201241.27286-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index c682fb927b64b..307083e519034 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -735,11 +735,12 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error,
 
 	ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
 	/*
-	 * Make sure updated value of ->s_mount_flags will be visible before
-	 * ->s_flags update
+	 * EXT4_FLAGS_SHUTDOWN was set which stops all filesystem
+	 * modifications. We don't set SB_RDONLY because that requires
+	 * sb->s_umount semaphore and setting it without proper remount
+	 * procedure is confusing code such as freeze_super() leading to
+	 * deadlocks and other problems.
 	 */
-	smp_wmb();
-	sb->s_flags |= SB_RDONLY;
 }
 
 static void update_super_work(struct work_struct *work)
-- 
2.43.0

[PATCH AUTOSEL 6.10 189/197] bpf: Make the pointer returned by iter next method valid

[Sasha Levin]

From: Juntong Deng <juntong.deng@outlook.com>

[ Upstream commit 4cc8c50c9abcb2646a7a4fcef3cea5dcb30c06cf ]

Currently we cannot pass the pointer returned by iter next method as
argument to KF_TRUSTED_ARGS or KF_RCU kfuncs, because the pointer
returned by iter next method is not "valid".

This patch sets the pointer returned by iter next method to be valid.

This is based on the fact that if the iterator is implemented correctly,
then the pointer returned from the iter next method should be valid.

This does not make NULL pointer valid. If the iter next method has
KF_RET_NULL flag, then the verifier will ask the ebpf program to
check NULL pointer.

KF_RCU_PROTECTED iterator is a special case, the pointer returned by
iter next method should only be valid within RCU critical section,
so it should be with MEM_RCU, not PTR_TRUSTED.

Another special case is bpf_iter_num_next, which returns a pointer with
base type PTR_TO_MEM. PTR_TO_MEM should not be combined with type flag
PTR_TRUSTED (PTR_TO_MEM already means the pointer is valid).

The pointer returned by iter next method of other types of iterators
is with PTR_TRUSTED.

In addition, this patch adds get_iter_from_state to help us get the
current iterator from the current state.

Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB584869F8B448EA1C87B7CDA399962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 73f55f4b945ee..2eff14da6bf16 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -7975,6 +7975,15 @@ static int widen_imprecise_scalars(struct bpf_verifier_env *env,
 	return 0;
 }
 
+static struct bpf_reg_state *get_iter_from_state(struct bpf_verifier_state *cur_st,
+						 struct bpf_kfunc_call_arg_meta *meta)
+{
+	int iter_frameno = meta->iter.frameno;
+	int iter_spi = meta->iter.spi;
+
+	return &cur_st->frame[iter_frameno]->stack[iter_spi].spilled_ptr;
+}
+
 /* process_iter_next_call() is called when verifier gets to iterator's next
  * "method" (e.g., bpf_iter_num_next() for numbers iterator) call. We'll refer
  * to it as just "iter_next()" in comments below.
@@ -8059,12 +8068,10 @@ static int process_iter_next_call(struct bpf_verifier_env *env, int insn_idx,
 	struct bpf_verifier_state *cur_st = env->cur_state, *queued_st, *prev_st;
 	struct bpf_func_state *cur_fr = cur_st->frame[cur_st->curframe], *queued_fr;
 	struct bpf_reg_state *cur_iter, *queued_iter;
-	int iter_frameno = meta->iter.frameno;
-	int iter_spi = meta->iter.spi;
 
 	BTF_TYPE_EMIT(struct bpf_iter);
 
-	cur_iter = &env->cur_state->frame[iter_frameno]->stack[iter_spi].spilled_ptr;
+	cur_iter = get_iter_from_state(cur_st, meta);
 
 	if (cur_iter->iter.state != BPF_ITER_STATE_ACTIVE &&
 	    cur_iter->iter.state != BPF_ITER_STATE_DRAINED) {
@@ -8092,7 +8099,7 @@ static int process_iter_next_call(struct bpf_verifier_env *env, int insn_idx,
 		if (!queued_st)
 			return -ENOMEM;
 
-		queued_iter = &queued_st->frame[iter_frameno]->stack[iter_spi].spilled_ptr;
+		queued_iter = get_iter_from_state(queued_st, meta);
 		queued_iter->iter.state = BPF_ITER_STATE_ACTIVE;
 		queued_iter->iter.depth++;
 		if (prev_st)
@@ -12654,6 +12661,17 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn,
 			regs[BPF_REG_0].btf = desc_btf;
 			regs[BPF_REG_0].type = PTR_TO_BTF_ID;
 			regs[BPF_REG_0].btf_id = ptr_type_id;
+
+			if (is_iter_next_kfunc(&meta)) {
+				struct bpf_reg_state *cur_iter;
+
+				cur_iter = get_iter_from_state(env->cur_state, &meta);
+
+				if (cur_iter->type & MEM_RCU) /* KF_RCU_PROTECTED */
+					regs[BPF_REG_0].type |= MEM_RCU;
+				else
+					regs[BPF_REG_0].type |= PTR_TRUSTED;
+			}
 		}
 
 		if (is_kfunc_ret_null(&meta)) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 190/197] iomap: fix iomap_dio_zero() for fs bs > system page size

[Sasha Levin]

From: Pankaj Raghav <p.raghav@samsung.com>

[ Upstream commit 10553a91652d995274da63fc317470f703765081 ]

iomap_dio_zero() will pad a fs block with zeroes if the direct IO size
< fs block size. iomap_dio_zero() has an implicit assumption that fs block
size < page_size. This is true for most filesystems at the moment.

If the block size > page size, this will send the contents of the page
next to zero page(as len > PAGE_SIZE) to the underlying block device,
causing FS corruption.

iomap is a generic infrastructure and it should not make any assumptions
about the fs block size and the page size of the system.

Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240822135018.1931258-7-kernel@pankajraghav.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/iomap/buffered-io.c |  4 ++--
 fs/iomap/direct-io.c   | 45 ++++++++++++++++++++++++++++++++++++------
 2 files changed, 41 insertions(+), 8 deletions(-)

diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index d465589902790..d505636035af3 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -1992,10 +1992,10 @@ iomap_writepages(struct address_space *mapping, struct writeback_control *wbc,
 }
 EXPORT_SYMBOL_GPL(iomap_writepages);
 
-static int __init iomap_init(void)
+static int __init iomap_buffered_init(void)
 {
 	return bioset_init(&iomap_ioend_bioset, 4 * (PAGE_SIZE / SECTOR_SIZE),
 			   offsetof(struct iomap_ioend, io_bio),
 			   BIOSET_NEED_BVECS);
 }
-fs_initcall(iomap_init);
+fs_initcall(iomap_buffered_init);
diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
index f3b43d223a46e..c02b266bba525 100644
--- a/fs/iomap/direct-io.c
+++ b/fs/iomap/direct-io.c
@@ -11,6 +11,7 @@
 #include <linux/iomap.h>
 #include <linux/backing-dev.h>
 #include <linux/uio.h>
+#include <linux/set_memory.h>
 #include <linux/task_io_accounting_ops.h>
 #include "trace.h"
 
@@ -27,6 +28,13 @@
 #define IOMAP_DIO_WRITE		(1U << 30)
 #define IOMAP_DIO_DIRTY		(1U << 31)
 
+/*
+ * Used for sub block zeroing in iomap_dio_zero()
+ */
+#define IOMAP_ZERO_PAGE_SIZE (SZ_64K)
+#define IOMAP_ZERO_PAGE_ORDER (get_order(IOMAP_ZERO_PAGE_SIZE))
+static struct page *zero_page;
+
 struct iomap_dio {
 	struct kiocb		*iocb;
 	const struct iomap_dio_ops *dops;
@@ -232,13 +240,20 @@ void iomap_dio_bio_end_io(struct bio *bio)
 }
 EXPORT_SYMBOL_GPL(iomap_dio_bio_end_io);
 
-static void iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio,
+static int iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio,
 		loff_t pos, unsigned len)
 {
 	struct inode *inode = file_inode(dio->iocb->ki_filp);
-	struct page *page = ZERO_PAGE(0);
 	struct bio *bio;
 
+	if (!len)
+		return 0;
+	/*
+	 * Max block size supported is 64k
+	 */
+	if (WARN_ON_ONCE(len > IOMAP_ZERO_PAGE_SIZE))
+		return -EINVAL;
+
 	bio = iomap_dio_alloc_bio(iter, dio, 1, REQ_OP_WRITE | REQ_SYNC | REQ_IDLE);
 	fscrypt_set_bio_crypt_ctx(bio, inode, pos >> inode->i_blkbits,
 				  GFP_KERNEL);
@@ -246,8 +261,9 @@ static void iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio,
 	bio->bi_private = dio;
 	bio->bi_end_io = iomap_dio_bio_end_io;
 
-	__bio_add_page(bio, page, len, 0);
+	__bio_add_page(bio, zero_page, len, 0);
 	iomap_dio_submit_bio(iter, dio, bio, pos);
+	return 0;
 }
 
 /*
@@ -356,8 +372,10 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter,
 	if (need_zeroout) {
 		/* zero out from the start of the block to the write offset */
 		pad = pos & (fs_block_size - 1);
-		if (pad)
-			iomap_dio_zero(iter, dio, pos - pad, pad);
+
+		ret = iomap_dio_zero(iter, dio, pos - pad, pad);
+		if (ret)
+			goto out;
 	}
 
 	/*
@@ -431,7 +449,8 @@ static loff_t iomap_dio_bio_iter(const struct iomap_iter *iter,
 		/* zero out from the end of the write to the end of the block */
 		pad = pos & (fs_block_size - 1);
 		if (pad)
-			iomap_dio_zero(iter, dio, pos, fs_block_size - pad);
+			ret = iomap_dio_zero(iter, dio, pos,
+					     fs_block_size - pad);
 	}
 out:
 	/* Undo iter limitation to current extent */
@@ -753,3 +772,17 @@ iomap_dio_rw(struct kiocb *iocb, struct iov_iter *iter,
 	return iomap_dio_complete(dio);
 }
 EXPORT_SYMBOL_GPL(iomap_dio_rw);
+
+static int __init iomap_dio_init(void)
+{
+	zero_page = alloc_pages(GFP_KERNEL | __GFP_ZERO,
+				IOMAP_ZERO_PAGE_ORDER);
+
+	if (!zero_page)
+		return -ENOMEM;
+
+	set_memory_ro((unsigned long)page_address(zero_page),
+		      1U << IOMAP_ZERO_PAGE_ORDER);
+	return 0;
+}
+fs_initcall(iomap_dio_init);
-- 
2.43.0

[PATCH AUTOSEL 6.10 191/197] ext4: ext4_search_dir should return a proper error

[Sasha Levin]

From: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>

[ Upstream commit cd69f8f9de280e331c9e6ff689ced0a688a9ce8f ]

ext4_search_dir currently returns -1 in case of a failure, while it returns
0 when the name is not found. In such failure cases, it should return an
error code instead.

This becomes even more important when ext4_find_inline_entry returns an
error code as well in the next commit.

-EFSCORRUPTED seems appropriate as such error code as these failures would
be caused by unexpected record lengths and is in line with other instances
of ext4_check_dir_entry failures.

In the case of ext4_dx_find_entry, the current use of ERR_BAD_DX_DIR was
left as is to reduce the risk of regressions.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-2-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 1311ad0464b2a..12af7c7e09c1a 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1526,7 +1526,7 @@ static bool ext4_match(struct inode *parent,
 }
 
 /*
- * Returns 0 if not found, -1 on failure, and 1 on success
+ * Returns 0 if not found, -EFSCORRUPTED on failure, and 1 on success
  */
 int ext4_search_dir(struct buffer_head *bh, char *search_buf, int buf_size,
 		    struct inode *dir, struct ext4_filename *fname,
@@ -1547,7 +1547,7 @@ int ext4_search_dir(struct buffer_head *bh, char *search_buf, int buf_size,
 			 * a full check */
 			if (ext4_check_dir_entry(dir, NULL, de, bh, search_buf,
 						 buf_size, offset))
-				return -1;
+				return -EFSCORRUPTED;
 			*res_dir = de;
 			return 1;
 		}
@@ -1555,7 +1555,7 @@ int ext4_search_dir(struct buffer_head *bh, char *search_buf, int buf_size,
 		de_len = ext4_rec_len_from_disk(de->rec_len,
 						dir->i_sb->s_blocksize);
 		if (de_len <= 0)
-			return -1;
+			return -EFSCORRUPTED;
 		offset += de_len;
 		de = (struct ext4_dir_entry_2 *) ((char *) de + de_len);
 	}
@@ -1707,8 +1707,10 @@ static struct buffer_head *__ext4_find_entry(struct inode *dir,
 			goto cleanup_and_exit;
 		} else {
 			brelse(bh);
-			if (i < 0)
+			if (i < 0) {
+				ret = ERR_PTR(i);
 				goto cleanup_and_exit;
+			}
 		}
 	next:
 		if (++block >= nblocks)
@@ -1802,7 +1804,7 @@ static struct buffer_head * ext4_dx_find_entry(struct inode *dir,
 		if (retval == 1)
 			goto success;
 		brelse(bh);
-		if (retval == -1) {
+		if (retval < 0) {
 			bh = ERR_PTR(ERR_BAD_DX_DIR);
 			goto errout;
 		}
-- 
2.43.0

[PATCH AUTOSEL 6.10 192/197] ext4: avoid use-after-free in ext4_ext_show_leaf()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4e2524ba2ca5f54bdbb9e5153bea00421ef653f5 ]

In ext4_find_extent(), path may be freed by error or be reallocated, so
using a previously saved *ppath may have been freed and thus may trigger
use-after-free, as follows:

ext4_split_extent
  path = *ppath;
  ext4_split_extent_at(ppath)
  path = ext4_find_extent(ppath)
  ext4_split_extent_at(ppath)
    // ext4_find_extent fails to free path
    // but zeroout succeeds
  ext4_ext_show_leaf(inode, path)
    eh = path[depth].p_hdr
    // path use-after-free !!!

Similar to ext4_split_extent_at(), we use *ppath directly as an input to
ext4_ext_show_leaf(). Fix a spelling error by the way.

Same problem in ext4_ext_handle_unwritten_extents(). Since 'path' is only
used in ext4_ext_show_leaf(), remove 'path' and use *ppath directly.

This issue is triggered only when EXT_DEBUG is defined and therefore does
not affect functionality.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20240822023545.1994557-5-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/extents.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e067f2dd0335c..7954430f886d8 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -3287,7 +3287,7 @@ static int ext4_split_extent_at(handle_t *handle,
 }
 
 /*
- * ext4_split_extents() splits an extent and mark extent which is covered
+ * ext4_split_extent() splits an extent and mark extent which is covered
  * by @map as split_flags indicates
  *
  * It may result in splitting the extent into multiple extents (up to three)
@@ -3363,7 +3363,7 @@ static int ext4_split_extent(handle_t *handle,
 			goto out;
 	}
 
-	ext4_ext_show_leaf(inode, path);
+	ext4_ext_show_leaf(inode, *ppath);
 out:
 	return err ? err : allocated;
 }
@@ -3828,14 +3828,13 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
 			struct ext4_ext_path **ppath, int flags,
 			unsigned int allocated, ext4_fsblk_t newblock)
 {
-	struct ext4_ext_path __maybe_unused *path = *ppath;
 	int ret = 0;
 	int err = 0;
 
 	ext_debug(inode, "logical block %llu, max_blocks %u, flags 0x%x, allocated %u\n",
 		  (unsigned long long)map->m_lblk, map->m_len, flags,
 		  allocated);
-	ext4_ext_show_leaf(inode, path);
+	ext4_ext_show_leaf(inode, *ppath);
 
 	/*
 	 * When writing into unwritten space, we should not fail to
@@ -3932,7 +3931,7 @@ ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
 	if (allocated > map->m_len)
 		allocated = map->m_len;
 	map->m_len = allocated;
-	ext4_ext_show_leaf(inode, path);
+	ext4_ext_show_leaf(inode, *ppath);
 out2:
 	return err ? err : allocated;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.10 193/197] ext4: fix i_data_sem unlock order in ext4_ind_migrate()

[Sasha Levin]

From: Artem Sadovnikov <ancowi69@gmail.com>

[ Upstream commit cc749e61c011c255d81b192a822db650c68b313f ]

Fuzzing reports a possible deadlock in jbd2_log_wait_commit.

This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require
synchronous updates because the file descriptor is opened with O_SYNC.
This can lead to the jbd2_journal_stop() function calling
jbd2_might_wait_for_commit(), potentially causing a deadlock if the
EXT4_IOC_MIGRATE call races with a write(2) system call.

This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this
case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the
jbd2_journal_stop function while i_data_sem is locked. This triggers
lockdep because the jbd2_journal_start function might also lock the same
jbd2_handle simultaneously.

Found by Linux Verification Center (linuxtesting.org) with syzkaller.

Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Co-developed-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Mikhail Ukhin <mish.uxin2012@yandex.ru>
Signed-off-by: Artem Sadovnikov <ancowi69@gmail.com>
Rule: add
Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex.ru
Link: https://patch.msgid.link/20240829152210.2754-1-ancowi69@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/migrate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index d98ac2af8199f..a5e1492bbaaa5 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -663,8 +663,8 @@ int ext4_ind_migrate(struct inode *inode)
 	if (unlikely(ret2 && !ret))
 		ret = ret2;
 errout:
-	ext4_journal_stop(handle);
 	up_write(&EXT4_I(inode)->i_data_sem);
+	ext4_journal_stop(handle);
 out_unlock:
 	ext4_writepages_up_write(inode->i_sb, alloc_ctx);
 	return ret;
-- 
2.43.0

[PATCH AUTOSEL 6.10 194/197] bpftool: Fix undefined behavior caused by shifting into the sign bit

[Sasha Levin]

From: Kuan-Wei Chiu <visitorckw@gmail.com>

[ Upstream commit 4cdc0e4ce5e893bc92255f5f734d983012f2bc2e ]

Replace shifts of '1' with '1U' in bitwise operations within
__show_dev_tc_bpf() to prevent undefined behavior caused by shifting
into the sign bit of a signed integer. By using '1U', the operations
are explicitly performed on unsigned integers, avoiding potential
integer overflow or sign-related issues.

Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240908140009.3149781-1-visitorckw@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/net.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/tools/bpf/bpftool/net.c b/tools/bpf/bpftool/net.c
index 968714b4c3d45..ad2ea6cf2db11 100644
--- a/tools/bpf/bpftool/net.c
+++ b/tools/bpf/bpftool/net.c
@@ -482,9 +482,9 @@ static void __show_dev_tc_bpf(const struct ip_devname_ifindex *dev,
 		if (prog_flags[i] || json_output) {
 			NET_START_ARRAY("prog_flags", "%s ");
 			for (j = 0; prog_flags[i] && j < 32; j++) {
-				if (!(prog_flags[i] & (1 << j)))
+				if (!(prog_flags[i] & (1U << j)))
 					continue;
-				NET_DUMP_UINT_ONLY(1 << j);
+				NET_DUMP_UINT_ONLY(1U << j);
 			}
 			NET_END_ARRAY("");
 		}
@@ -493,9 +493,9 @@ static void __show_dev_tc_bpf(const struct ip_devname_ifindex *dev,
 			if (link_flags[i] || json_output) {
 				NET_START_ARRAY("link_flags", "%s ");
 				for (j = 0; link_flags[i] && j < 32; j++) {
-					if (!(link_flags[i] & (1 << j)))
+					if (!(link_flags[i] & (1U << j)))
 						continue;
-					NET_DUMP_UINT_ONLY(1 << j);
+					NET_DUMP_UINT_ONLY(1U << j);
 				}
 				NET_END_ARRAY("");
 			}
-- 
2.43.0

[PATCH AUTOSEL 6.10 195/197] iomap: handle a post-direct I/O invalidate race in iomap_write_delalloc_release

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 7a9d43eace888a0ee6095035997bb138425844d3 ]

When direct I/O completions invalidates the page cache it holds neither the
i_rwsem nor the invalidate_lock so it can be racing with
iomap_write_delalloc_release.  If the search for the end of the region that
contains data returns the start offset we hit such a race and just need to
look for the end of the newly created hole instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-2-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/iomap/buffered-io.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
index d505636035af3..74ee76f772d86 100644
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -1226,7 +1226,15 @@ static int iomap_write_delalloc_release(struct inode *inode,
 			error = data_end;
 			goto out_unlock;
 		}
-		WARN_ON_ONCE(data_end <= start_byte);
+
+		/*
+		 * If we race with post-direct I/O invalidation of the page cache,
+		 * there might be no data left at start_byte.
+		 */
+		if (data_end == start_byte)
+			continue;
+
+		WARN_ON_ONCE(data_end < start_byte);
 		WARN_ON_ONCE(data_end > scan_end_byte);
 
 		error = iomap_write_delalloc_scan(inode, &punch_start_byte,
-- 
2.43.0

[PATCH AUTOSEL 6.10 196/197] bpftool: Fix undefined behavior in qsort(NULL, 0, ...)

[Sasha Levin]

From: Kuan-Wei Chiu <visitorckw@gmail.com>

[ Upstream commit f04e2ad394e2755d0bb2d858ecb5598718bf00d5 ]

When netfilter has no entry to display, qsort is called with
qsort(NULL, 0, ...). This results in undefined behavior, as UBSan
reports:

net.c:827:2: runtime error: null pointer passed as argument 1, which is declared to never be null

Although the C standard does not explicitly state whether calling qsort
with a NULL pointer when the size is 0 constitutes undefined behavior,
Section 7.1.4 of the C standard (Use of library functions) mentions:

"Each of the following statements applies unless explicitly stated
otherwise in the detailed descriptions that follow: If an argument to a
function has an invalid value (such as a value outside the domain of
the function, or a pointer outside the address space of the program, or
a null pointer, or a pointer to non-modifiable storage when the
corresponding parameter is not const-qualified) or a type (after
promotion) not expected by a function with variable number of
arguments, the behavior is undefined."

To avoid this, add an early return when nf_link_info is NULL to prevent
calling qsort with a NULL pointer.

Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240910150207.3179306-1-visitorckw@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/net.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/bpf/bpftool/net.c b/tools/bpf/bpftool/net.c
index ad2ea6cf2db11..0f2106218e1f0 100644
--- a/tools/bpf/bpftool/net.c
+++ b/tools/bpf/bpftool/net.c
@@ -824,6 +824,9 @@ static void show_link_netfilter(void)
 		nf_link_count++;
 	}
 
+	if (!nf_link_info)
+		return;
+
 	qsort(nf_link_info, nf_link_count, sizeof(*nf_link_info), netfilter_link_compar);
 
 	for (id = 0; id < nf_link_count; id++) {
-- 
2.43.0

[PATCH AUTOSEL 6.10 197/197] bpf: Fix a sdiv overflow issue

[Sasha Levin]

From: Yonghong Song <yonghong.song@linux.dev>

[ Upstream commit 7dd34d7b7dcf9309fc6224caf4dd5b35bedddcb7 ]

Zac Ecob reported a problem where a bpf program may cause kernel crash due
to the following error:
  Oops: divide error: 0000 [#1] PREEMPT SMP KASAN PTI

The failure is due to the below signed divide:
  LLONG_MIN/-1 where LLONG_MIN equals to -9,223,372,036,854,775,808.
LLONG_MIN/-1 is supposed to give a positive number 9,223,372,036,854,775,808,
but it is impossible since for 64-bit system, the maximum positive
number is 9,223,372,036,854,775,807. On x86_64, LLONG_MIN/-1 will
cause a kernel exception. On arm64, the result for LLONG_MIN/-1 is
LLONG_MIN.

Further investigation found all the following sdiv/smod cases may trigger
an exception when bpf program is running on x86_64 platform:
  - LLONG_MIN/-1 for 64bit operation
  - INT_MIN/-1 for 32bit operation
  - LLONG_MIN%-1 for 64bit operation
  - INT_MIN%-1 for 32bit operation
where -1 can be an immediate or in a register.

On arm64, there are no exceptions:
  - LLONG_MIN/-1 = LLONG_MIN
  - INT_MIN/-1 = INT_MIN
  - LLONG_MIN%-1 = 0
  - INT_MIN%-1 = 0
where -1 can be an immediate or in a register.

Insn patching is needed to handle the above cases and the patched codes
produced results aligned with above arm64 result. The below are pseudo
codes to handle sdiv/smod exceptions including both divisor -1 and divisor 0
and the divisor is stored in a register.

sdiv:
      tmp = rX
      tmp += 1 /* [-1, 0] -> [0, 1]
      if tmp >(unsigned) 1 goto L2
      if tmp == 0 goto L1
      rY = 0
  L1:
      rY = -rY;
      goto L3
  L2:
      rY /= rX
  L3:

smod:
      tmp = rX
      tmp += 1 /* [-1, 0] -> [0, 1]
      if tmp >(unsigned) 1 goto L1
      if tmp == 1 (is64 ? goto L2 : goto L3)
      rY = 0;
      goto L2
  L1:
      rY %= rX
  L2:
      goto L4  // only when !is64
  L3:
      wY = wY  // only when !is64
  L4:

  [1] https://lore.kernel.org/bpf/tPJLTEh7S_DxFEqAI2Ji5MBSoZVg7_G-Py2iaZpAaWtM961fFTWtsnlzwvTbzBzaUzwQAoNATXKUlt0LZOFgnDcIyKCswAnAGdUF3LBrhGQ=@protonmail.com/

Reported-by: Zac Ecob <zacecob@protonmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240913150326.1187788-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 93 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 89 insertions(+), 4 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 2eff14da6bf16..c713ca32ab046 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -19927,13 +19927,46 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
 			/* Convert BPF_CLASS(insn->code) == BPF_ALU64 to 32-bit ALU */
 			insn->code = BPF_ALU | BPF_OP(insn->code) | BPF_SRC(insn->code);
 
-		/* Make divide-by-zero exceptions impossible. */
+		/* Make sdiv/smod divide-by-minus-one exceptions impossible. */
+		if ((insn->code == (BPF_ALU64 | BPF_MOD | BPF_K) ||
+		     insn->code == (BPF_ALU64 | BPF_DIV | BPF_K) ||
+		     insn->code == (BPF_ALU | BPF_MOD | BPF_K) ||
+		     insn->code == (BPF_ALU | BPF_DIV | BPF_K)) &&
+		    insn->off == 1 && insn->imm == -1) {
+			bool is64 = BPF_CLASS(insn->code) == BPF_ALU64;
+			bool isdiv = BPF_OP(insn->code) == BPF_DIV;
+			struct bpf_insn *patchlet;
+			struct bpf_insn chk_and_sdiv[] = {
+				BPF_RAW_INSN((is64 ? BPF_ALU64 : BPF_ALU) |
+					     BPF_NEG | BPF_K, insn->dst_reg,
+					     0, 0, 0),
+			};
+			struct bpf_insn chk_and_smod[] = {
+				BPF_MOV32_IMM(insn->dst_reg, 0),
+			};
+
+			patchlet = isdiv ? chk_and_sdiv : chk_and_smod;
+			cnt = isdiv ? ARRAY_SIZE(chk_and_sdiv) : ARRAY_SIZE(chk_and_smod);
+
+			new_prog = bpf_patch_insn_data(env, i + delta, patchlet, cnt);
+			if (!new_prog)
+				return -ENOMEM;
+
+			delta    += cnt - 1;
+			env->prog = prog = new_prog;
+			insn      = new_prog->insnsi + i + delta;
+			goto next_insn;
+		}
+
+		/* Make divide-by-zero and divide-by-minus-one exceptions impossible. */
 		if (insn->code == (BPF_ALU64 | BPF_MOD | BPF_X) ||
 		    insn->code == (BPF_ALU64 | BPF_DIV | BPF_X) ||
 		    insn->code == (BPF_ALU | BPF_MOD | BPF_X) ||
 		    insn->code == (BPF_ALU | BPF_DIV | BPF_X)) {
 			bool is64 = BPF_CLASS(insn->code) == BPF_ALU64;
 			bool isdiv = BPF_OP(insn->code) == BPF_DIV;
+			bool is_sdiv = isdiv && insn->off == 1;
+			bool is_smod = !isdiv && insn->off == 1;
 			struct bpf_insn *patchlet;
 			struct bpf_insn chk_and_div[] = {
 				/* [R,W]x div 0 -> 0 */
@@ -19953,10 +19986,62 @@ static int do_misc_fixups(struct bpf_verifier_env *env)
 				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
 				BPF_MOV32_REG(insn->dst_reg, insn->dst_reg),
 			};
+			struct bpf_insn chk_and_sdiv[] = {
+				/* [R,W]x sdiv 0 -> 0
+				 * LLONG_MIN sdiv -1 -> LLONG_MIN
+				 * INT_MIN sdiv -1 -> INT_MIN
+				 */
+				BPF_MOV64_REG(BPF_REG_AX, insn->src_reg),
+				BPF_RAW_INSN((is64 ? BPF_ALU64 : BPF_ALU) |
+					     BPF_ADD | BPF_K, BPF_REG_AX,
+					     0, 0, 1),
+				BPF_RAW_INSN((is64 ? BPF_JMP : BPF_JMP32) |
+					     BPF_JGT | BPF_K, BPF_REG_AX,
+					     0, 4, 1),
+				BPF_RAW_INSN((is64 ? BPF_JMP : BPF_JMP32) |
+					     BPF_JEQ | BPF_K, BPF_REG_AX,
+					     0, 1, 0),
+				BPF_RAW_INSN((is64 ? BPF_ALU64 : BPF_ALU) |
+					     BPF_MOV | BPF_K, insn->dst_reg,
+					     0, 0, 0),
+				/* BPF_NEG(LLONG_MIN) == -LLONG_MIN == LLONG_MIN */
+				BPF_RAW_INSN((is64 ? BPF_ALU64 : BPF_ALU) |
+					     BPF_NEG | BPF_K, insn->dst_reg,
+					     0, 0, 0),
+				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+				*insn,
+			};
+			struct bpf_insn chk_and_smod[] = {
+				/* [R,W]x mod 0 -> [R,W]x */
+				/* [R,W]x mod -1 -> 0 */
+				BPF_MOV64_REG(BPF_REG_AX, insn->src_reg),
+				BPF_RAW_INSN((is64 ? BPF_ALU64 : BPF_ALU) |
+					     BPF_ADD | BPF_K, BPF_REG_AX,
+					     0, 0, 1),
+				BPF_RAW_INSN((is64 ? BPF_JMP : BPF_JMP32) |
+					     BPF_JGT | BPF_K, BPF_REG_AX,
+					     0, 3, 1),
+				BPF_RAW_INSN((is64 ? BPF_JMP : BPF_JMP32) |
+					     BPF_JEQ | BPF_K, BPF_REG_AX,
+					     0, 3 + (is64 ? 0 : 1), 1),
+				BPF_MOV32_IMM(insn->dst_reg, 0),
+				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+				*insn,
+				BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+				BPF_MOV32_REG(insn->dst_reg, insn->dst_reg),
+			};
 
-			patchlet = isdiv ? chk_and_div : chk_and_mod;
-			cnt = isdiv ? ARRAY_SIZE(chk_and_div) :
-				      ARRAY_SIZE(chk_and_mod) - (is64 ? 2 : 0);
+			if (is_sdiv) {
+				patchlet = chk_and_sdiv;
+				cnt = ARRAY_SIZE(chk_and_sdiv);
+			} else if (is_smod) {
+				patchlet = chk_and_smod;
+				cnt = ARRAY_SIZE(chk_and_smod) - (is64 ? 2 : 0);
+			} else {
+				patchlet = isdiv ? chk_and_div : chk_and_mod;
+				cnt = isdiv ? ARRAY_SIZE(chk_and_div) :
+					      ARRAY_SIZE(chk_and_mod) - (is64 ? 2 : 0);
+			}
 
 			new_prog = bpf_patch_insn_data(env, i + delta, patchlet, cnt);
 			if (!new_prog)
-- 
2.43.0