* [PATCH v6 1/2] dt-bindings: timer: mips,p8700-gcru
2025-08-06 12:26 [PATCH v6 0/2] riscv: Use GCR.U timer device as clocksource Aleksa Paunovic via B4 Relay
@ 2025-08-06 12:26 ` Aleksa Paunovic via B4 Relay
2025-08-06 12:26 ` [PATCH v6 2/2] riscv: Allow for riscv-clock to pick up mmio address Aleksa Paunovic via B4 Relay
2025-08-28 10:24 ` [PATCH v6 0/2] riscv: Use GCR.U timer device as clocksource Aleksa Paunovic
2 siblings, 0 replies; 4+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2025-08-06 12:26 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Paul Walmsley, Palmer Dabbelt,
Albert Ou, Alexandre Ghiti
Cc: linux-kernel, devicetree, linux-riscv, Djordje Todorovic,
Aleksa Paunovic, Conor Dooley
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Add dt-bindings for the GCR.U memory mapped timer device for RISC-V
platforms. The GCR.U memory region contains shadow copies of the RISC-V
mtime register and the hrtime Global Configuration Register.
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
.../devicetree/bindings/timer/mips,p8700-gcru.yaml | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/Documentation/devicetree/bindings/timer/mips,p8700-gcru.yaml b/Documentation/devicetree/bindings/timer/mips,p8700-gcru.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..3498255762cce6b3f491292d340d9639bb573e6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/mips,p8700-gcru.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/mips,p8700-gcru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GCR.U timer device for the MIPS P8700 platform
+
+maintainers:
+ - Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
+
+description:
+ The GCR.U memory region contains memory mapped shadow copies of
+ mtime and hrtime Global Configuration Registers,
+ which software can choose to make accessible from user mode.
+
+properties:
+ compatible:
+ const: mips,p8700-gcru
+
+ reg:
+ items:
+ - description: Read-only shadow copy of the RISC-V mtime register.
+ - description: Read-only shadow copy of the P8700 high resolution timer register.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ timer@1617f000 {
+ compatible = "mips,p8700-gcru";
+ reg = <0x1617f050 0x8>,
+ <0x1617f090 0x8>;
+ };
--
2.43.0
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v6 2/2] riscv: Allow for riscv-clock to pick up mmio address.
2025-08-06 12:26 [PATCH v6 0/2] riscv: Use GCR.U timer device as clocksource Aleksa Paunovic via B4 Relay
2025-08-06 12:26 ` [PATCH v6 1/2] dt-bindings: timer: mips,p8700-gcru Aleksa Paunovic via B4 Relay
@ 2025-08-06 12:26 ` Aleksa Paunovic via B4 Relay
2025-08-28 10:24 ` [PATCH v6 0/2] riscv: Use GCR.U timer device as clocksource Aleksa Paunovic
2 siblings, 0 replies; 4+ messages in thread
From: Aleksa Paunovic via B4 Relay @ 2025-08-06 12:26 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Paul Walmsley, Palmer Dabbelt,
Albert Ou, Alexandre Ghiti
Cc: linux-kernel, devicetree, linux-riscv, Djordje Todorovic,
Aleksa Paunovic
From: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Allow faster rdtime access via GCR.U mtime shadow register on RISC-V
devices. This feature can be enabled by setting GCRU_TIME_MMIO
during configuration.
Reformat the clint timer to use the same mechanism if RISCV_M_MODE is set.
Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
---
arch/riscv/include/asm/clint.h | 26 ----------------
arch/riscv/include/asm/timex.h | 63 ++++++++++++++++++++++-----------------
drivers/clocksource/Kconfig | 12 ++++++++
drivers/clocksource/timer-clint.c | 20 ++++++-------
drivers/clocksource/timer-riscv.c | 34 +++++++++++++++++++++
5 files changed, 90 insertions(+), 65 deletions(-)
diff --git a/arch/riscv/include/asm/clint.h b/arch/riscv/include/asm/clint.h
deleted file mode 100644
index 0789fd37b40ae06a11f0b5cc0f01dba591b4cf16..0000000000000000000000000000000000000000
--- a/arch/riscv/include/asm/clint.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2020 Google, Inc
- */
-
-#ifndef _ASM_RISCV_CLINT_H
-#define _ASM_RISCV_CLINT_H
-
-#include <linux/types.h>
-#include <asm/mmio.h>
-
-#ifdef CONFIG_RISCV_M_MODE
-/*
- * This lives in the CLINT driver, but is accessed directly by timex.h to avoid
- * any overhead when accessing the MMIO timer.
- *
- * The ISA defines mtime as a 64-bit memory-mapped register that increments at
- * a constant frequency, but it doesn't define some other constraints we depend
- * on (most notably ordering constraints, but also some simpler stuff like the
- * memory layout). Thus, this is called "clint_time_val" instead of something
- * like "riscv_mtime", to signify that these non-ISA assumptions must hold.
- */
-extern u64 __iomem *clint_time_val;
-#endif
-
-#endif
diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
index a06697846e69521caceac2ae4d4e040d227d2ae7..fc8e18ad628e6d68bf9703688f42e76e1cd45559 100644
--- a/arch/riscv/include/asm/timex.h
+++ b/arch/riscv/include/asm/timex.h
@@ -7,31 +7,25 @@
#define _ASM_RISCV_TIMEX_H
#include <asm/csr.h>
+#include <asm/mmio.h>
+
+#include <linux/jump_label.h>
typedef unsigned long cycles_t;
-#ifdef CONFIG_RISCV_M_MODE
+/*
+ * Used for directly accessing MMIO timers. For now
+ * this includes the M-mode clint timer and the GCR.U mtime shadow copy.
+ */
+extern u64 __iomem *riscv_time_val;
-#include <asm/clint.h>
+extern cycles_t (*get_cycles_ptr)(void);
+extern u32 (*get_cycles_hi_ptr)(void);
-#ifdef CONFIG_64BIT
-static inline cycles_t get_cycles(void)
-{
- return readq_relaxed(clint_time_val);
-}
-#else /* !CONFIG_64BIT */
-static inline u32 get_cycles(void)
-{
- return readl_relaxed(((u32 *)clint_time_val));
-}
-#define get_cycles get_cycles
+#define get_cycles get_cycles_ptr
+#define get_cycles_hi get_cycles_hi_ptr
-static inline u32 get_cycles_hi(void)
-{
- return readl_relaxed(((u32 *)clint_time_val) + 1);
-}
-#define get_cycles_hi get_cycles_hi
-#endif /* CONFIG_64BIT */
+#ifdef CONFIG_RISCV_M_MODE
/*
* Much like MIPS, we may not have a viable counter to use at an early point
@@ -40,34 +34,47 @@ static inline u32 get_cycles_hi(void)
*/
static inline unsigned long random_get_entropy(void)
{
- if (unlikely(clint_time_val == NULL))
+ if (unlikely(riscv_time_val == NULL))
return random_get_entropy_fallback();
return get_cycles();
}
+
#define random_get_entropy() random_get_entropy()
+#endif
-#else /* CONFIG_RISCV_M_MODE */
+#ifdef CONFIG_64BIT
+static inline cycles_t __maybe_unused mmio_get_cycles(void)
+{
+ return readq_relaxed(riscv_time_val);
+}
+#else /* !CONFIG_64BIT */
+static inline cycles_t __maybe_unused mmio_get_cycles(void)
+{
+ return readl_relaxed(((u32 __iomem *)riscv_time_val));
+}
+#endif /* CONFIG_64BIT */
-static inline cycles_t get_cycles(void)
+static inline cycles_t __maybe_unused get_cycles_csr(void)
{
return csr_read(CSR_TIME);
}
-#define get_cycles get_cycles
-static inline u32 get_cycles_hi(void)
+static inline u32 __maybe_unused mmio_get_cycles_hi(void)
{
- return csr_read(CSR_TIMEH);
+ return readl_relaxed(((u32 __iomem *)riscv_time_val) + 1);
}
-#define get_cycles_hi get_cycles_hi
-#endif /* !CONFIG_RISCV_M_MODE */
+static inline u32 __maybe_unused get_cycles_hi_csr(void)
+{
+ return csr_read(CSR_TIMEH);
+}
#ifdef CONFIG_64BIT
static inline u64 get_cycles64(void)
{
return get_cycles();
}
-#else /* CONFIG_64BIT */
+#else /* !CONFIG_64BIT */
static inline u64 get_cycles64(void)
{
u32 hi, lo;
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 645f517a1ac26d0c12d4b2b46591321ddf6e20b3..fbe4d0d6183ea24f557ce692b8c18e88dcf58155 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -669,6 +669,18 @@ config CLINT_TIMER
This option enables the CLINT timer for RISC-V systems. The CLINT
driver is usually used for NoMMU RISC-V systems.
+config GCRU_TIME_MMIO
+ bool "GCR.U timer support for RISC-V platforms"
+ depends on !RISCV_M_MODE && RISCV && RISCV_TIMER
+ default n
+ help
+ Access GCR.U shadow copy of the RISC-V mtime register
+ on platforms that provide a compatible device, instead of
+ reading the time CSR. Since reading the time CSR
+ traps to M mode on certain platforms, this may be more efficient.
+
+ If you don't know what to do here, say n.
+
config CSKY_MP_TIMER
bool "SMP Timer for the C-SKY platform" if COMPILE_TEST
depends on CSKY
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 0bdd9d7ec545839109cf82ad36632889f5b2d2ef..d6ab794741a6b59227827323017a7e6ff830963c 100644
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -24,10 +24,6 @@
#include <linux/smp.h>
#include <linux/timex.h>
-#ifndef CONFIG_RISCV_M_MODE
-#include <asm/clint.h>
-#endif
-
#define CLINT_IPI_OFF 0
#define CLINT_TIMER_CMP_OFF 0x4000
#define CLINT_TIMER_VAL_OFF 0xbff8
@@ -41,8 +37,14 @@ static unsigned long clint_timer_freq;
static unsigned int clint_timer_irq;
#ifdef CONFIG_RISCV_M_MODE
-u64 __iomem *clint_time_val;
-EXPORT_SYMBOL(clint_time_val);
+u64 __iomem *riscv_time_val __ro_after_init;
+EXPORT_SYMBOL(riscv_time_val);
+
+cycles_t (*get_cycles_ptr)(void) = mmio_get_cycles;
+EXPORT_SYMBOL(get_cycles_ptr);
+
+u32 (*get_cycles_hi_ptr)(void) = mmio_get_cycles_hi;
+EXPORT_SYMBOL(get_cycles_hi_ptr);
#endif
#ifdef CONFIG_SMP
@@ -218,11 +220,7 @@ static int __init clint_timer_init_dt(struct device_node *np)
clint_timer_freq = riscv_timebase;
#ifdef CONFIG_RISCV_M_MODE
- /*
- * Yes, that's an odd naming scheme. time_val is public, but hopefully
- * will die in favor of something cleaner.
- */
- clint_time_val = clint_timer_val;
+ riscv_time_val = clint_timer_val;
#endif
pr_info("%pOFP: timer running at %ld Hz\n", np, clint_timer_freq);
diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
index 4d7cf338824a3b21461c2756a002236dedc48f5f..dcef6f2afd382711559326c419e09630386df7e2 100644
--- a/drivers/clocksource/timer-riscv.c
+++ b/drivers/clocksource/timer-riscv.c
@@ -22,6 +22,7 @@
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/interrupt.h>
#include <linux/of_irq.h>
+#include <linux/of_address.h>
#include <linux/limits.h>
#include <clocksource/timer-riscv.h>
#include <asm/smp.h>
@@ -32,6 +33,15 @@
static DEFINE_STATIC_KEY_FALSE(riscv_sstc_available);
static bool riscv_timer_cannot_wake_cpu;
+u64 __iomem *riscv_time_val __ro_after_init;
+EXPORT_SYMBOL(riscv_time_val);
+
+cycles_t (*get_cycles_ptr)(void) = get_cycles_csr;
+EXPORT_SYMBOL(get_cycles_ptr);
+
+u32 (*get_cycles_hi_ptr)(void) = get_cycles_hi_csr;
+EXPORT_SYMBOL(get_cycles_hi_ptr);
+
static void riscv_clock_event_stop(void)
{
if (static_branch_likely(&riscv_sstc_available)) {
@@ -209,6 +219,11 @@ static int __init riscv_timer_init_dt(struct device_node *n)
int cpuid, error;
unsigned long hartid;
struct device_node *child;
+#if defined(CONFIG_GCRU_TIME_MMIO)
+ u64 mmio_addr;
+ u64 mmio_size;
+ struct device_node *gcru;
+#endif
error = riscv_of_processor_hartid(n, &hartid);
if (error < 0) {
@@ -226,6 +241,25 @@ static int __init riscv_timer_init_dt(struct device_node *n)
if (cpuid != smp_processor_id())
return 0;
+#if defined(CONFIG_GCRU_TIME_MMIO)
+ gcru = of_find_compatible_node(NULL, NULL, "mips,p8700-gcru");
+ if (gcru) {
+ if (!of_property_read_reg(gcru, 0, &mmio_addr, &mmio_size)) {
+ riscv_time_val = ioremap((long)mmio_addr, mmio_size);
+ if (riscv_time_val) {
+ pr_info("Using mmio time register at 0x%llx\n",
+ mmio_addr);
+ get_cycles_ptr = &mmio_get_cycles;
+ get_cycles_hi_ptr = &mmio_get_cycles_hi;
+ } else {
+ pr_warn("Unable to use mmio time at 0x%llx\n",
+ mmio_addr);
+ }
+ of_node_put(gcru);
+ }
+ }
+#endif
+
child = of_find_compatible_node(NULL, NULL, "riscv,timer");
if (child) {
riscv_timer_cannot_wake_cpu = of_property_read_bool(child,
--
2.43.0
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v6 0/2] riscv: Use GCR.U timer device as clocksource
2025-08-06 12:26 [PATCH v6 0/2] riscv: Use GCR.U timer device as clocksource Aleksa Paunovic via B4 Relay
2025-08-06 12:26 ` [PATCH v6 1/2] dt-bindings: timer: mips,p8700-gcru Aleksa Paunovic via B4 Relay
2025-08-06 12:26 ` [PATCH v6 2/2] riscv: Allow for riscv-clock to pick up mmio address Aleksa Paunovic via B4 Relay
@ 2025-08-28 10:24 ` Aleksa Paunovic
2 siblings, 0 replies; 4+ messages in thread
From: Aleksa Paunovic @ 2025-08-28 10:24 UTC (permalink / raw)
To: devnull+aleksa.paunovic.htecgroup.com
Cc: Aleksa Paunovic, alex, aou, conor+dt, conor.dooley,
daniel.lezcano, devicetree, Djordje Todorovic, krzk+dt,
linux-kernel, linux-riscv, palmer, paul.walmsley, robh, tglx
On 8/6/25 14:26, Aleksa Paunovic via B4 Relay wrote:
> This series adds bindings for the GCR.U timer device and corresponding
> driver support. Accessing the memory mapped mtime register in the GCR.U
> region should be faster than trapping to M mode each time the timer
> needs to be read.
>
> Signed-off-by: Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
Gentle ping.
If there are any further comments, we'd be happy to address them.
Best regards,
Aleksa
> ---
> Changes in v6:
> - Rename mti,gcru to mips,p8700-gcru
> - Link to v5: https://lore.kernel.org/r/20250711-riscv-time-mmio-v5-0-9ed1f825ad5e@htecgroup.com
>
> Changes in v5:
> - Fixed build issues on 32-bit RISC-V and sparse warnings
> - Remove clint_time_val and clint.h, replace with riscv_time_val
> - Depend on RISCV_TIMER in Kconfig
> Changes in v4:
> - Remove "select" from mti,gcru.yaml.
> - Refactor the driver to use function pointers instead of static keys.
>
> Previous versions:
> v1: https://lore.kernel.org/lkml/20241227150056.191794-1-arikalo@gmail.com/#t
> v2: https://lore.kernel.org/linux-riscv/20250409143816.15802-1-aleksa.paunovic@htecgroup.com/
> v3: https://lore.kernel.org/linux-riscv/DU0PR09MB61968695A2A3146EE83B7708F6BA2@DU0PR09MB6196.eurprd09.prod.outlook.com/
> v4: https://lore.kernel.org/r/20250514-riscv-time-mmio-v4-0-cb0cf2922d66@htecgroup.com
> v5: https://lore.kernel.org/r/20250711-riscv-time-mmio-v5-0-9ed1f825ad5e@htecgroup.com
>
> ---
> Aleksa Paunovic (2):
> dt-bindings: timer: mips,p8700-gcru
> riscv: Allow for riscv-clock to pick up mmio address.
>
> .../devicetree/bindings/timer/mips,p8700-gcru.yaml | 38 +++++++++++++
> arch/riscv/include/asm/clint.h | 26 ---------
> arch/riscv/include/asm/timex.h | 63 ++++++++++++----------
> drivers/clocksource/Kconfig | 12 +++++
> drivers/clocksource/timer-clint.c | 20 ++++---
> drivers/clocksource/timer-riscv.c | 34 ++++++++++++
> 6 files changed, 128 insertions(+), 65 deletions(-)
> ---
> base-commit: 038d61fd642278bab63ee8ef722c50d10ab01e8f
> change-id: 20250424-riscv-time-mmio-5628e0fca8af
>
> Best regards,
> --
> Aleksa Paunovic <aleksa.paunovic@htecgroup.com>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread