[PATCH 0/5] Enable HDMI0 on several RK3588 based boards

[PATCH 0/5] Enable HDMI0 on several RK3588 based boards

[Cristian Ciocaltea]

Since the initial support for the RK3588 HDMI TX Controller [1] has been
merged as of next-20241018, let's enable the HDMI0 output port for the
following boards: Radxa ROCK 5A & 5B, Rockchip RK3588 EVB1 V10, Xunlong
Orange Pi 5+.

@Luis: Could you please verify this series still works as expected on
your Orange Pi device?

The ROCK 5A related patch is currently untested, but we might be able to
validate it beginning of next week.

Thanks,
Cristian

[1]: https://lore.kernel.org/all/20241016-b4-rk3588-bridge-upstream-v10-0-87ef92a6d14e@collabora.com/

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
Cristian Ciocaltea (5):
      arm64: dts: rockchip: Add HDMI0 node to rk3588
      arm64: dts: rockchip: Enable HDMI0 on rock-5b
      arm64: dts: rockchip: Enable HDMI0 on rk3588-evb1
      arm64: dts: rockchip: Enable HDMI0 on orangepi-5-plus
      [UNTESTED] arm64: dts: rockchip: Enable HDMI0 on rock-5a

 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi      | 41 +++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts   | 47 ++++++++++++++++++++++
 .../boot/dts/rockchip/rk3588-orangepi-5-plus.dts   | 47 ++++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts    | 47 ++++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts   | 47 ++++++++++++++++++++++
 5 files changed, 229 insertions(+)
---
base-commit: f2493655d2d3d5c6958ed996b043c821c23ae8d3
change-id: 20241018-rk3588-hdmi0-dt-1a135d0076af

[PATCH 1/5] arm64: dts: rockchip: Add HDMI0 node to rk3588

[Cristian Ciocaltea]

Add support for the HDMI0 output port found on RK3588 SoC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 41 +++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index fc67585b64b7baa33d5a816517f20c4cb940b52d..a337f3fb8377e4a3a200d4d3a3773a237de2bd6e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -1370,6 +1370,47 @@ i2s9_8ch: i2s@fddfc000 {
 		status = "disabled";
 	};
 
+	hdmi0: hdmi@fde80000 {
+		compatible = "rockchip,rk3588-dw-hdmi-qp";
+		reg = <0x0 0xfde80000 0x0 0x20000>;
+		clocks = <&cru PCLK_HDMITX0>,
+			 <&cru CLK_HDMITX0_EARC>,
+			 <&cru CLK_HDMITX0_REF>,
+			 <&cru MCLK_I2S5_8CH_TX>,
+			 <&cru CLK_HDMIHDP0>,
+			 <&cru HCLK_VO1>;
+		clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "avp", "cec", "earc", "main", "hpd";
+		phys = <&hdptxphy_hdmi0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmim0_tx0_cec &hdmim0_tx0_hpd
+			     &hdmim0_tx0_scl &hdmim0_tx0_sda>;
+		power-domains = <&power RK3588_PD_VO1>;
+		resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMIHDP0>;
+		reset-names = "ref", "hdp";
+		rockchip,grf = <&sys_grf>;
+		rockchip,vo-grf = <&vo1_grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hdmi0_in: port@0 {
+				reg = <0>;
+			};
+
+			hdmi0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	qos_gpu_m0: qos@fdf35000 {
 		compatible = "rockchip,rk3588-qos", "syscon";
 		reg = <0x0 0xfdf35000 0x0 0x20>;

-- 
2.47.0

[PATCH 2/5] arm64: dts: rockchip: Enable HDMI0 on rock-5b

[Cristian Ciocaltea]

Add the necessary DT changes to enable HDMI0 on Rock 5B.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 47 +++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index d6fff5b86b87020f115ce64795aee90c002a2255..0c3baf74981b714eb2a1edbc3fbbb69cd688cfc2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588.dtsi"
 
 / {
@@ -37,6 +38,17 @@ analog-sound {
 		pinctrl-0 = <&hp_detect>;
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -192,6 +204,26 @@ &gpu {
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -858,3 +890,18 @@ &usb_host1_xhci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};

-- 
2.47.0

Re: [PATCH 2/5] arm64: dts: rockchip: Enable HDMI0 on rock-5b

[FUKAUMI Naoki]

Hi,

thank you very much for your work!

On 10/19/24 06:39, Cristian Ciocaltea wrote:
> Add the necessary DT changes to enable HDMI0 on Rock 5B.

Rock 5B -> (Radxa) ROCK 5B

> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

Tested-by: FUKAUMI Naoki <naoki@radxa.com>

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

> ---
>   arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 47 +++++++++++++++++++++++++
>   1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> index d6fff5b86b87020f115ce64795aee90c002a2255..0c3baf74981b714eb2a1edbc3fbbb69cd688cfc2 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
> @@ -4,6 +4,7 @@
>   
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/leds/common.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
>   #include "rk3588.dtsi"
>   
>   / {
> @@ -37,6 +38,17 @@ analog-sound {
>   		pinctrl-0 = <&hp_detect>;
>   	};
>   
> +	hdmi0-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi0_con_in: endpoint {
> +				remote-endpoint = <&hdmi0_out_con>;
> +			};
> +		};
> +	};
> +
>   	leds {
>   		compatible = "gpio-leds";
>   		pinctrl-names = "default";
> @@ -192,6 +204,26 @@ &gpu {
>   	status = "okay";
>   };
>   
> +&hdmi0 {
> +	status = "okay";
> +};
> +
> +&hdmi0_in {
> +	hdmi0_in_vp0: endpoint {
> +		remote-endpoint = <&vp0_out_hdmi0>;
> +	};
> +};
> +
> +&hdmi0_out {
> +	hdmi0_out_con: endpoint {
> +		remote-endpoint = <&hdmi0_con_in>;
> +	};
> +};
> +
> +&hdptxphy_hdmi0 {
> +	status = "okay";
> +};
> +
>   &i2c0 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&i2c0m2_xfer>;
> @@ -858,3 +890,18 @@ &usb_host1_xhci {
>   &usb_host2_xhci {
>   	status = "okay";
>   };
> +
> +&vop_mmu {
> +	status = "okay";
> +};
> +
> +&vop {
> +	status = "okay";
> +};
> +
> +&vp0 {
> +	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> +		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> +		remote-endpoint = <&hdmi0_in_vp0>;
> +	};
> +};

Re: [PATCH 2/5] arm64: dts: rockchip: Enable HDMI0 on rock-5b

[Cristian Ciocaltea]

On 10/19/24 4:41 AM, FUKAUMI Naoki wrote:
> Hi,
> 
> thank you very much for your work!
> 
> On 10/19/24 06:39, Cristian Ciocaltea wrote:
>> Add the necessary DT changes to enable HDMI0 on Rock 5B.
> 
> Rock 5B -> (Radxa) ROCK 5B
> 
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> 
> Tested-by: FUKAUMI Naoki <naoki@radxa.com>

Thanks for testing! Will send v2 with updated description.

[PATCH 3/5] arm64: dts: rockchip: Enable HDMI0 on rk3588-evb1

[Cristian Ciocaltea]

Add the necessary DT changes to enable HDMI0 on Rockchip RK3588 EVB1.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 47 ++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index df44dbc394ca54fac61664fc3c647cf8e1189dff..863a73b0e3da73150d2874abc5762ab0c4c0ce63 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588.dtsi"
 
@@ -120,6 +121,17 @@ backlight: backlight {
 		pwms = <&pwm2 0 25000 0>;
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	pcie20_avdd0v85: pcie20-avdd0v85-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pcie20_avdd0v85";
@@ -300,6 +312,26 @@ &gpu {
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &i2c2 {
 	status = "okay";
 
@@ -1256,3 +1288,18 @@ &usb_host1_xhci {
 	dr_mode = "host";
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};

-- 
2.47.0

[PATCH 4/5] arm64: dts: rockchip: Enable HDMI0 on orangepi-5-plus

[Cristian Ciocaltea]

Add the necessary DT changes to enable HDMI0 on Orange Pi 5 Plus.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 .../boot/dts/rockchip/rk3588-orangepi-5-plus.dts   | 47 ++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index c73fecf1c73c94944bb25e1243d5390b84241338..9b1f985a32ebe73478d4318d5246aada78c08ffa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include <dt-bindings/usb/pd.h>
 #include "rk3588.dtsi"
 
@@ -85,6 +86,17 @@ led {
 		};
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	fan: pwm-fan {
 		compatible = "pwm-fan";
 		cooling-levels = <0 70 75 80 100>;
@@ -263,6 +275,26 @@ &cpu_l3 {
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0m2_xfer>;
@@ -883,3 +915,18 @@ &usb_host1_ehci {
 &usb_host1_ohci {
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};

-- 
2.47.0

[PATCH UNTESTED 5/5] arm64: dts: rockchip: Enable HDMI0 on rock-5a

[Cristian Ciocaltea]

Add the necessary DT changes to enable HDMI0 on Rock 5A.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 47 ++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index 87fce8d9a964cd53d179ce214ae1c0ff505a2dce..1fd122250b0c70e729b7a2239ab5f288a6387a70 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3588s.dtsi"
 
 / {
@@ -35,6 +36,17 @@ chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -296,6 +308,26 @@ &gmac1_rgmii_clk
 	status = "okay";
 };
 
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdptxphy_hdmi0 {
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		/* RTL8211F */
@@ -788,3 +820,18 @@ &usb_host1_ohci {
 &usb_host2_xhci {
 	status = "okay";
 };
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};

-- 
2.47.0

Re: [PATCH UNTESTED 5/5] arm64: dts: rockchip: Enable HDMI0 on rock-5a

[FUKAUMI Naoki]

Hi,

On 10/19/24 06:39, Cristian Ciocaltea wrote:
> Add the necessary DT changes to enable HDMI0 on Rock 5A.

Rock 5A -> (Radxa) ROCK 5A

> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>

something wrong... dmesg is below

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.000000] Linux version 
6.12.0-rc3-next-20241018-05708-gfa23bedaae21 (radxa@radxa) (gcc (Ubuntu 
13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP 
PREEMPT Sat Oct 19 00:36:14 UTC 2024
[    0.000000] KASLR enabled
[    0.000000] Machine model: Radxa ROCK 5A
[    0.000000] efi: UEFI not found.
[    0.000000] earlycon: uart0 at MMIO32 0x00000000feb50000 (options 
'1500000n8')
[    0.000000] printk: legacy bootconsole [uart0] enabled
[    0.000000] OF: reserved mem: Reserved memory: No reserved-memory 
node in the DT
[    0.000000] NUMA: Faking a node at [mem 
0x0000000000200000-0x00000002ffffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x2fef84bc0-0x2fef871ff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000002ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000]   node   0: [mem 0x00000002f0000000-0x00000002ffffffff]
[    0.000000] Initmem setup node 0 [mem 
0x0000000000200000-0x00000002ffffffff]
[    0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
[    0.000000] cma: Reserved 32 MiB at 0x00000000ee000000 on node -1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 25 pages/cpu s61720 r8192 d32488 u102400
[    0.000000] pcpu-alloc: s61720 r8192 d32488 u102400 alloc=25*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 
1530923
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: 
root=/dev/disk/by-uuid/4310f77a-a5c1-43d3-83ee-3b3d9a2821be ro earlycon 
console=tty1 console=ttyS2,1500000
[    0.000000] printk: log buffer data + meta data: 131072 + 458752 = 
589824 bytes
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 
8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 
4194304 bytes, linear)
[    0.000000] Fallback order for Node 0: 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 
2096640
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 8.
[    0.000000] software IO TLB: mapped [mem 
0x00000000e775a000-0x00000000eb75a000] (64MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay 
is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] RCU Tasks: Setting shift to 3 and lim to 1 
rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 
rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 480 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: MBI range [424:479]
[    0.000000] GICv3: Using MBI frame 0x00000000fe610000
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1
[    0.000000] GICv3: CPU0: found redistributor 0 region 
0:0x00000000fe680000
[    0.000000] ITS [mem 0xfe640000-0xfe65ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @100070000 
(indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt 
Collections @100080000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] ITS [mem 0xfe660000-0xfe67ffff]
[    0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
[    0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @1000a0000 
(indirect, esz 8, psz 64K, shr 0)
[    0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt 
Collections @1000b0000 (flat, esz 2, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x00000001000c0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table 
@0x00000001000d0000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { 
/cpus/cpu@0[0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { 
/cpus/cpu@400[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on 
contention.
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff 
max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps 
every 4398046511097ns
[    0.004692] Console: colour dummy device 80x25
[    0.005121] printk: legacy console [tty1] enabled
[    0.006537] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.007519] pid_max: default: 32768 minimum: 301
[    0.008054] LSM: initializing lsm=capability
[    0.008651] Mount-cache hash table entries: 16384 (order: 5, 131072 
bytes, linear)
[    0.009401] Mountpoint-cache hash table entries: 16384 (order: 5, 
131072 bytes, linear)
[    0.020750] rcu: Hierarchical SRCU implementation.
[    0.021218] rcu: 	Max phase no-delay instances is 1000.
[    0.022012] Timer migration: 1 hierarchy levels; 8 children per 
group; 1 crossnode level
[    0.023069] fsl-mc MSI: msi-controller@fe640000 domain created
[    0.023650] fsl-mc MSI: msi-controller@fe660000 domain created
[    0.030498] EFI services will not be available.
[    0.031400] smp: Bringing up secondary CPUs ...
[    0.034334] Detected VIPT I-cache on CPU1
[    0.034412] GICv3: CPU1: found redistributor 100 region 
0:0x00000000fe6a0000
[    0.034429] GICv3: CPU1: using allocated LPI pending table 
@0x00000001000e0000
[    0.034476] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    0.038215] Detected VIPT I-cache on CPU2
[    0.038289] GICv3: CPU2: found redistributor 200 region 
0:0x00000000fe6c0000
[    0.038305] GICv3: CPU2: using allocated LPI pending table 
@0x00000001000f0000
[    0.038352] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    0.046240] Detected VIPT I-cache on CPU3
[    0.046314] GICv3: CPU3: found redistributor 300 region 
0:0x00000000fe6e0000
[    0.046329] GICv3: CPU3: using allocated LPI pending table 
@0x0000000100100000
[    0.046373] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    0.050232] CPU features: detected: Spectre-v4
[    0.050238] CPU features: detected: Spectre-BHB
[    0.050243] CPU features: detected: SSBS not fully self-synchronizing
[    0.050246] Detected PIPT I-cache on CPU4
[    0.050288] GICv3: CPU4: found redistributor 400 region 
0:0x00000000fe700000
[    0.050297] GICv3: CPU4: using allocated LPI pending table 
@0x0000000100110000
[    0.050326] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    0.054275] Detected PIPT I-cache on CPU5
[    0.054326] GICv3: CPU5: found redistributor 500 region 
0:0x00000000fe720000
[    0.054336] GICv3: CPU5: using allocated LPI pending table 
@0x0000000100120000
[    0.054366] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    0.058282] Detected PIPT I-cache on CPU6
[    0.058332] GICv3: CPU6: found redistributor 600 region 
0:0x00000000fe740000
[    0.058342] GICv3: CPU6: using allocated LPI pending table 
@0x0000000100130000
[    0.058370] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    0.066197] Detected PIPT I-cache on CPU7
[    0.066247] GICv3: CPU7: found redistributor 700 region 
0:0x00000000fe760000
[    0.066257] GICv3: CPU7: using allocated LPI pending table 
@0x0000000100140000
[    0.066286] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    0.066395] smp: Brought up 1 node, 8 CPUs
[    0.084617] SMP: Total of 8 processors activated.
[    0.085070] CPU: All CPU(s) started at EL2
[    0.085464] CPU features: detected: 32-bit EL0 Support
[    0.085953] CPU features: detected: Data cache clean to the PoU not 
required for I/D coherence
[    0.086769] CPU features: detected: Common not Private translations
[    0.087363] CPU features: detected: CRC32 instructions
[    0.087876] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.088423] CPU features: detected: LSE atomic instructions
[    0.088954] CPU features: detected: Privileged Access Never
[    0.089484] CPU features: detected: RAS Extension Support
[    0.090000] CPU features: detected: Speculative Store Bypassing Safe 
(SSBS)
[    0.090729] alternatives: applying system-wide alternatives
[    0.094850] CPU features: detected: Hardware dirty bit management on 
CPU4-7
[    0.096002] Memory: 8051128K/8386560K available (17344K kernel code, 
4898K rwdata, 11908K rodata, 10496K init, 734K bss, 294792K reserved, 
32768K cma-reserved)
[    0.099639] devtmpfs: initialized
[    0.107249] clocksource: jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.108172] futex hash table entries: 2048 (order: 5, 131072 bytes, 
linear)
[    0.109116] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.109710] 0 pages in range for non-PLT usage
[    0.109713] 512880 pages in range for PLT usage
[    0.110267] pinctrl core: initialized pinctrl subsystem
[    0.112824] DMI not present or invalid.
[    0.115108] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.116237] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic 
allocations
[    0.117026] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for 
atomic allocations
[    0.117948] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for 
atomic allocations
[    0.118725] audit: initializing netlink subsys (disabled)
[    0.119361] audit: type=2000 audit(0.112:1): state=initialized 
audit_enabled=0 res=1
[    0.119949] thermal_sys: Registered thermal governor 'step_wise'
[    0.120097] thermal_sys: Registered thermal governor 'power_allocator'
[    0.120704] cpuidle: using governor menu
[    0.121782] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.122551] ASID allocator initialised with 32768 entries
[    0.124420] Serial: AMBA PL011 UART driver
[    0.136557] platform fdd90000.vop: Fixed dependency cycle(s) with 
/hdmi@fde80000
[    0.137283] platform fde80000.hdmi: Fixed dependency cycle(s) with 
/vop@fdd90000
[    0.145489] platform a41000000.pcie: Fixed dependency cycle(s) with 
/pcie@fe190000/legacy-interrupt-controller
[    0.154046] gpio gpiochip0: Static allocation of GPIO base is 
deprecated, use dynamic allocation.
[    0.155110] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    0.155912] gpio gpiochip1: Static allocation of GPIO base is 
deprecated, use dynamic allocation.
[    0.156863] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    0.157637] gpio gpiochip2: Static allocation of GPIO base is 
deprecated, use dynamic allocation.
[    0.158574] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    0.159393] gpio gpiochip3: Static allocation of GPIO base is 
deprecated, use dynamic allocation.
[    0.160346] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    0.161126] gpio gpiochip4: Static allocation of GPIO base is 
deprecated, use dynamic allocation.
[    0.162064] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    0.163300] platform fde80000.hdmi: Fixed dependency cycle(s) with 
/hdmi0-con
[    0.163998] platform hdmi0-con: Fixed dependency cycle(s) with 
/hdmi@fde80000
[    0.167172] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    0.167813] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[    0.168403] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.169040] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[    0.169629] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.170265] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[    0.170862] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[    0.171498] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[    0.173628] ACPI: Interpreter disabled.
[    0.176660] iommu: Default domain type: Translated
[    0.177115] iommu: DMA domain TLB invalidation policy: strict mode
[    0.178048] SCSI subsystem initialized
[    0.178515] libata version 3.00 loaded.
[    0.178606] usbcore: registered new interface driver usbfs
[    0.179144] usbcore: registered new interface driver hub
[    0.179654] usbcore: registered new device driver usb
[    0.181126] pps_core: LinuxPPS API ver. 1 registered
[    0.181594] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 
Rodolfo Giometti <giometti@linux.it>
[    0.182454] PTP clock support registered
[    0.182910] EDAC MC: Ver: 3.0.0
[    0.183569] scmi_core: SCMI protocol bus registered
[    0.184929] FPGA manager framework
[    0.185288] Advanced Linux Sound Architecture Driver Initialized.
[    0.186419] vgaarb: loaded
[    0.186976] clocksource: Switched to clocksource arch_sys_counter
[    0.187682] VFS: Disk quotas dquot_6.6.0
[    0.188061] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 
bytes)
[    0.188815] pnp: PnP ACPI: disabled
[    0.195172] NET: Registered PF_INET protocol family
[    0.195813] IP idents hash table entries: 131072 (order: 8, 1048576 
bytes, linear)
[    0.200704] tcp_listen_portaddr_hash hash table entries: 4096 (order: 
4, 65536 bytes, linear)
[    0.201586] Table-perturb hash table entries: 65536 (order: 6, 262144 
bytes, linear)
[    0.202320] TCP established hash table entries: 65536 (order: 7, 
524288 bytes, linear)
[    0.203569] TCP bind hash table entries: 65536 (order: 9, 2097152 
bytes, linear)
[    0.206145] TCP: Hash tables configured (established 65536 bind 65536)
[    0.206804] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.207631] UDP-Lite hash table entries: 4096 (order: 5, 131072 
bytes, linear)
[    0.208540] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.209405] RPC: Registered named UNIX socket transport module.
[    0.209963] RPC: Registered udp transport module.
[    0.210405] RPC: Registered tcp transport module.
[    0.210846] RPC: Registered tcp-with-tls transport module.
[    0.211371] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.211978] PCI: CLS 0 bytes, default 64
[    0.212525] Unpacking initramfs...
[    0.220910] kvm [1]: nv: 554 coarse grained trap handlers
[    0.221636] kvm [1]: IPA Size Limit: 40 bits
[    0.222052] kvm [1]: GICv3: no GICV resource entry
[    0.222504] kvm [1]: disabling GICv2 emulation
[    0.222953] kvm [1]: GIC system register CPU interface enabled
[    0.223511] kvm [1]: vgic interrupt IRQ18
[    0.223915] kvm [1]: VHE mode initialized successfully
[    0.225334] Initialise system trusted keyrings
[    0.225920] workingset: timestamp_bits=42 max_order=21 bucket_order=0
[    0.226674] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.227426] NFS: Registering the id_resolver key type
[    0.227912] Key type id_resolver registered
[    0.228306] Key type id_legacy registered
[    0.228691] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.229320] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver 
Registering...
[    0.230127] 9p: Installing v9fs 9p2000 file system support
[    0.269744] Key type asymmetric registered
[    0.270134] Asymmetric key parser 'x509' registered
[    0.270622] Block layer SCSI generic (bsg) driver version 0.4 loaded 
(major 245)
[    0.271323] io scheduler mq-deadline registered
[    0.271750] io scheduler kyber registered
[    0.272147] io scheduler bfq registered
[    0.580049] Freeing initrd memory: 20748K
[    0.587097] ledtrig-cpu: registered to indicate activity on CPUs
[    0.607079] dma-pl330 fea10000.dma-controller: Loaded driver for 
PL330 DMAC-241330
[    0.607797] dma-pl330 fea10000.dma-controller: 	DBUFF-128x8bytes 
Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.609389] dma-pl330 fea30000.dma-controller: Loaded driver for 
PL330 DMAC-241330
[    0.610103] dma-pl330 fea30000.dma-controller: 	DBUFF-128x8bytes 
Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.611719] dma-pl330 fed10000.dma-controller: Loaded driver for 
PL330 DMAC-241330
[    0.612432] dma-pl330 fed10000.dma-controller: 	DBUFF-128x8bytes 
Num_Chans-8 Num_Peri-32 Num_Events-16
[    0.625037] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.627086] printk: legacy console [ttyS2] disabled
[    0.627682] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 40, 
base_baud = 1500000) is a 16550A
[    0.628636] printk: legacy console [ttyS2] enabled
[    0.629506] printk: legacy bootconsole [uart0] disabled
[    0.632717] msm_serial: driver initialized
[    0.633450] SuperH (H)SCI(F) driver initialized
[    0.634105] STM32 USART driver initialized
[    0.642810] loop: module loaded
[    0.643863] megasas: 07.727.03.00-rc1
[    0.648109] rockchip-spi feb20000.spi: Runtime PM usage count underflow!
[    0.648834] spi spi2.0: Fixed dependency cycle(s) with 
/spi@feb20000/pmic@0/regulators/dcdc-reg7
[    0.649637] spi spi2.0: Fixed dependency cycle(s) with 
/spi@feb20000/pmic@0/dvs3-null-pins
[    0.650365] spi spi2.0: Fixed dependency cycle(s) with 
/spi@feb20000/pmic@0/dvs2-null-pins
[    0.651107] spi spi2.0: Fixed dependency cycle(s) with 
/spi@feb20000/pmic@0/dvs1-null-pins
[    0.654266] tun: Universal TUN/TAP device driver, 1.6
[    0.655932] thunder_xcv, ver 1.0
[    0.656238] thunder_bgx, ver 1.0
[    0.656533] nicpf, ver 1.0
[    0.657925] hns3: Hisilicon Ethernet Network Driver for Hip08 Family 
- version
[    0.658561] hns3: Copyright (c) 2017 Huawei Corporation.
[    0.659054] hclge is initializing
[    0.659364] e1000: Intel(R) PRO/1000 Network Driver
[    0.659793] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.660308] e1000e: Intel(R) PRO/1000 Network Driver
[    0.660744] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.661272] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.661746] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.662247] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[    0.662796] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.663629] sky2: driver version 1.30
[    0.665452] VFIO - User Level meta-driver version: 0.3
[    0.669067] usbcore: registered new interface driver usb-storage
[    0.672531] i2c_dev: i2c /dev entries driver
[    0.676160] platform fe470000.i2s: Fixed dependency cycle(s) with 
/i2c@fec90000/audio-codec@11
[    0.676953] i2c 7-0011: Fixed dependency cycle(s) with /i2s@fe470000
[    0.684569] sdhci: Secure Digital Host Controller Interface driver
[    0.685116] sdhci: Copyright(c) Pierre Ossman
[    0.686391] Synopsys Designware Multimedia Card Interface Driver
[    0.688020] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.691528] arm-scmi arm-scmi.0.auto: Using scmi_smc_transport
[    0.692054] arm-scmi arm-scmi.0.auto: SCMI max-rx-timeout: 30ms
[    0.692640] scmi_protocol scmi_dev.1: Enabled polling mode TX channel 
- prot_id:16
[    0.693420] arm-scmi arm-scmi.0.auto: SCMI Notifications - Core Enabled.
[    0.694041] arm-scmi arm-scmi.0.auto: SCMI Protocol v2.0 'rockchip:' 
Firmware version 0x0
[    0.701721] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.703204] usbcore: registered new interface driver usbhid
[    0.703698] usbhid: USB HID core driver
[    0.708183] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 
7 (0,8000003f) counters available
[    0.709920] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 
7 (0,8000003f) counters available
[    0.713333] optee: probing for conduit method.
[    0.713731] optee: api uid mismatch
[    0.714040] optee firmware:optee: probe with driver optee failed with 
error -22
[    0.717921] NET: Registered PF_PACKET protocol family
[    0.718421] 9pnet: Installing 9P2000 support
[    0.718824] Key type dns_resolver registered
[    0.722907] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] 
using ADMA
[    0.724236] registered taskstats version 1
[    0.724707] Loading compiled-in X.509 certificates
[    0.729117] Demotion targets for Node 0: null
[    0.729302] mmc0: Failed to initialize a non-removable card
[    0.759524] rk808-regulator rk808-regulator.2.auto: there is no dvs0 gpio
[    0.760629] rk808-regulator rk808-regulator.2.auto: there is no dvs1 gpio
[    0.780002] fan53555-regulator 2-0042: FAN53555 Option[10] Rev[1] 
Detected!
[    0.780147] fan53555-regulator 0-0042: FAN53555 Option[10] Rev[1] 
Detected!
[    0.780742] fan53555-regulator 0-0043: FAN53555 Option[10] Rev[1] 
Detected!
[    0.783655] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit 
address mode.
[    0.784334] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    0.784934] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    0.785477] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 
74,32 bit host data width,256 deep fifo
[    0.793708] ehci-platform fc800000.usb: EHCI Host Controller
[    0.794229] ehci-platform fc800000.usb: new USB bus registered, 
assigned bus number 1
[    0.794358] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    0.794975] ehci-platform fc880000.usb: EHCI Host Controller
[    0.795441] ehci-platform fc800000.usb: irq 75, io mem 0xfc800000
[    0.795550] ohci-platform fc840000.usb: new USB bus registered, 
assigned bus number 2
[    0.795764] cpufreq: cpufreq_online: CPU0: Running at unlisted 
initial frequency: 816000 KHz, changing to: 1008000 KHz
[    0.795855] cpu cpu0: EM: created perf domain
[    0.796017] ehci-platform fc880000.usb: new USB bus registered, 
assigned bus number 3
[    0.796624] ohci-platform fc840000.usb: irq 77, io mem 0xfc840000
[    0.798108] ehci-platform fc880000.usb: irq 76, io mem 0xfc880000
[    0.799059] cpufreq: cpufreq_online: CPU4: Running at unlisted 
initial frequency: 816000 KHz, changing to: 1200000 KHz
[    0.799335] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 
400000Hz, actual 400000HZ div = 0)
[    0.799849] cpu cpu4: EM: created perf domain
[    0.805762] cpufreq: cpufreq_online: CPU6: Running at unlisted 
initial frequency: 816000 KHz, changing to: 1200000 KHz
[    0.806769] cpu cpu6: EM: created perf domain
[    0.807058] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    0.808110] hub 1-0:1.0: USB hub found
[    0.808452] hub 1-0:1.0: 1 port detected
[    0.810495] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    0.810681] clk: Disabling unused clocks
[    0.811107] ohci-platform fc8c0000.usb: new USB bus registered, 
assigned bus number 4
[    0.811897] PM: genpd: Disabling unused power domains
[    0.812165] ohci-platform fc8c0000.usb: irq 78, io mem 0xfc8c0000
[    0.812631] ALSA device list:
[    0.813355]   No soundcards found.
[    0.813723] dw-apb-uart feb50000.serial: forbid DMA for kernel console
[    0.819039] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    0.820240] hub 3-0:1.0: USB hub found
[    0.820607] hub 3-0:1.0: 1 port detected
[    0.855579] hub 2-0:1.0: USB hub found
[    0.855943] hub 2-0:1.0: 1 port detected
[    0.871510] hub 4-0:1.0: USB hub found
[    0.871853] hub 4-0:1.0: 1 port detected
[    0.874666] Freeing unused kernel memory: 10496K
[    0.875125] Run /init as init process
[    0.875448]   with arguments:
[    0.875450]     /init
[    0.875452]   with environment:
[    0.875454]     HOME=/
[    0.875456]     TERM=linux
[    0.989081] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 
150000000Hz, actual 148500000HZ div = 0)
[    1.058964] usb 1-1: new high-speed USB device number 2 using 
ehci-platform
[    1.114297] rockchip-vop2 fdd90000.vop: Adding to iommu group 0
[    1.136088] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
[    1.136634] rk_gmac-dwmac fe1c0000.ethernet: IRQ sfty not found
[    1.137218] rk_gmac-dwmac fe1c0000.ethernet: supply phy not found, 
using dummy regulator
[    1.137978] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? 
(output).
[    1.138600] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x3a).
[    1.139100] rk_gmac-dwmac fe1c0000.ethernet: RX delay(0x3e).
[    1.139597] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
[    1.142089] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    1.142574] xhci-hcd xhci-hcd.4.auto: new USB bus registered, 
assigned bus number 5
[    1.143608] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci 
version 0x110 quirks 0x0000808002000010
[    1.144441] xhci-hcd xhci-hcd.4.auto: irq 81, io mem 0xfcd00000
[    1.145009] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    1.145147] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII
[    1.145487] xhci-hcd xhci-hcd.4.auto: new USB bus registered, 
assigned bus number 6
[    1.146646] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed
[    1.149921] hub 5-0:1.0: USB hub found
[    1.150274] hub 5-0:1.0: 1 port detected
[    1.150682] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys 
ID: 0x51
[    1.151314] rk_gmac-dwmac fe1c0000.ethernet: 	DWMAC4/5
[    1.151762] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability 
register supported
[    1.152412] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload 
Engine supported
[    1.153063] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion 
supported
[    1.153674] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
[    1.154959] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
[    1.155442] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via 
HW Watchdog Timer
[    1.156143] usb usb6: We don't know the algorithms for LPM for this 
host, disabling LPM.
[    1.156744] rk_gmac-dwmac fe1c0000.ethernet: Enabled L3L4 Flow TC 
(entries=2)
[    1.156973] hub 6-0:1.0: USB hub found
[    1.157465] rk_gmac-dwmac fe1c0000.ethernet: Enabled RFS Flow TC 
(entries=10)
[    1.157794] hub 6-0:1.0: 1 port detected
[    1.158650] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
[    1.159295] rk_gmac-dwmac fe1c0000.ethernet: SPH feature enabled
[    1.159652] rockchip-drm display-subsystem: bound fdd90000.vop (ops 
vop2_component_ops [rockchipdrm])
[    1.159816] rk_gmac-dwmac fe1c0000.ethernet: Using 32/32 bits DMA 
host/device width
[    1.161059] dwhdmiqp-rockchip fde80000.hdmi: registered DesignWare 
HDMI QP I2C bus driver
[    1.162037] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 
dw_hdmi_qp_rockchip_ops [rockchipdrm])
[    1.163380] [drm] Initialized rockchip 1.0.0 for display-subsystem on 
minor 0
[    1.164153] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.164855] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.165654] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.166344] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.167038] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.167745] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.170607] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    1.188384] Console: switching to colour frame buffer device 128x48
[    1.188454] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    1.210936] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb 
frame buffer device
[    1.212661] hub 1-1:1.0: USB hub found
[    1.213123] hub 1-1:1.0: 4 ports detected
[    1.257486] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.259355] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.261198] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.261556] rockchip-dw-pcie a41000000.pcie: host bridge 
/pcie@fe190000 ranges:
[    1.261710] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 205
[    1.262340] rockchip-dw-pcie a41000000.pcie:       IO 
0x00f4100000..0x00f41fffff -> 0x00f4100000
[    1.262930] mmc1: new UHS-I speed SDR104 SDHC card at address aaaa
[    1.263701] rockchip-dw-pcie a41000000.pcie:      MEM 
0x00f4200000..0x00f4ffffff -> 0x00f4200000
[    1.264816] mmcblk1: mmc1:aaaa SE32G 29.7 GiB
[    1.264994] rockchip-dw-pcie a41000000.pcie:      MEM 
0x0a00000000..0x0a3fffffff -> 0x0040000000
[    1.266384] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.266562] rockchip-dw-pcie a41000000.pcie: iATU: unroll T, 8 ob, 8 
ib, align 64K, limit 8G
[    1.268187] dwhdmiqp-rockchip fde80000.hdmi: i2c read error
[    1.292497] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    1.296896] rk_gmac-dwmac fe1c0000.ethernet end0: renamed from eth0
[    1.344548] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    1.471034] rockchip-dw-pcie a41000000.pcie: PCIe Gen.1 x1 link up
[    1.472026] rockchip-dw-pcie a41000000.pcie: PCI host bridge to bus 
0004:40
[    1.475577] pci_bus 0004:40: root bus resource [bus 40-4f]
[    1.478856] pci_bus 0004:40: root bus resource [io  0x0000-0xfffff] 
(bus address [0xf4100000-0xf41fffff])
[    1.482491] pci_bus 0004:40: root bus resource [mem 
0xf4200000-0xf4ffffff]
[    1.485972] pci_bus 0004:40: root bus resource [mem 
0xa00000000-0xa3fffffff] (bus address [0x40000000-0x7fffffff])
[    1.489720] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400 PCIe 
Root Port
[    1.493158] pci 0004:40:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[    1.496452] pci 0004:40:00.0: PCI bridge to [bus 01-ff]
[    1.499303] pci 0004:40:00.0:   bridge window [io  0x0000-0x0fff]
[    1.502570] pci 0004:40:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    1.505580] pci 0004:40:00.0:   bridge window [mem 
0x00000000-0x000fffff 64bit pref]
[    1.508146] pci 0004:40:00.0: supports D1 D2
[    1.510312] pci 0004:40:00.0: PME# supported from D0 D1 D3hot
[    1.517094] pci 0004:40:00.0: Primary bus is hard wired to 0
[    1.519772] pci 0004:40:00.0: bridge configuration invalid ([bus 
01-ff]), reconfiguring
[    1.522743] pci 0004:41:00.0: [10ec:b852] type 00 class 0x028000 PCIe 
Endpoint
[    1.525494] pci 0004:41:00.0: BAR 0: initial BAR value 0x00000000 invalid
[    1.528124] pci 0004:41:00.0: BAR 0 [io  size 0x0100]
[    1.530328] pci 0004:41:00.0: BAR 2 [mem 0x00000000-0x000fffff 64bit]
[    1.533026] pci 0004:41:00.0: PME# supported from D0 D3hot D3cold
[    1.543123] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
[    1.545512] pci 0004:40:00.0: bridge window [mem 
0xf4200000-0xf42fffff]: assigned
[    1.548254] pci 0004:40:00.0: ROM [mem 0xf4300000-0xf430ffff pref]: 
assigned
[    1.550988] pci 0004:40:00.0: bridge window [io  0x1000-0x1fff]: assigned
[    1.553827] pci 0004:41:00.0: BAR 2 [mem 0xf4200000-0xf42fffff 
64bit]: assigned
[    1.556341] pci 0004:41:00.0: BAR 0 [io  0x1000-0x10ff]: assigned
[    1.558657] pci 0004:40:00.0: PCI bridge to [bus 41]
[    1.560647] pci 0004:40:00.0:   bridge window [io  0x1000-0x1fff]
[    1.562706] pci 0004:40:00.0:   bridge window [mem 0xf4200000-0xf42fffff]
[    1.564677] pci_bus 0004:40: resource 4 [io  0x0000-0xfffff]
[    1.566535] pci_bus 0004:40: resource 5 [mem 0xf4200000-0xf4ffffff]
[    1.568447] pci_bus 0004:40: resource 6 [mem 0xa00000000-0xa3fffffff]
[    1.570441] pci_bus 0004:41: resource 0 [io  0x1000-0x1fff]
[    1.572328] pci_bus 0004:41: resource 1 [mem 0xf4200000-0xf42fffff]
[    1.575991] pcieport 0004:40:00.0: PME: Signaling with IRQ 94
[    1.578141] pcieport 0004:40:00.0: AER: enabled with IRQ 95
[    1.598755] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    1.600944] xhci-hcd xhci-hcd.5.auto: new USB bus registered, 
assigned bus number 7
[    1.603376] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci 
version 0x110 quirks 0x0000808002000010
[    1.605875] xhci-hcd xhci-hcd.5.auto: irq 96, io mem 0xfc000000
[    1.608221] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    1.610127] xhci-hcd xhci-hcd.5.auto: new USB bus registered, 
assigned bus number 8
[    1.611019] raid6: neonx8   gen() 11881 MB/s
[    1.612074] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[    1.615882] hub 7-0:1.0: USB hub found
[    1.617595] hub 7-0:1.0: 1 port detected
[    1.619496] usb usb8: We don't know the algorithms for LPM for this 
host, disabling LPM.
[    1.621939] hub 8-0:1.0: USB hub found
[    1.623652] hub 8-0:1.0: 1 port detected
[    1.678946] raid6: neonx4   gen() 11924 MB/s
[    1.747021] raid6: neonx2   gen() 10068 MB/s
[    1.787060] usb 1-1.3: new full-speed USB device number 3 using 
ehci-platform
[    1.815069] raid6: neonx1   gen()  7974 MB/s
[    1.883039] raid6: int64x8  gen()  2218 MB/s
[    1.951066] raid6: int64x4  gen()  4272 MB/s
[    2.018988] raid6: int64x2  gen()  4665 MB/s
[    2.087022] raid6: int64x1  gen()  3841 MB/s
[    2.088590] raid6: using algorithm neonx4 gen() 11924 MB/s
[    2.155017] raid6: .... xor() 4926 MB/s, rmw enabled
[    2.157520] raid6: using neon recovery algorithm
[    2.161104] xor: measuring software checksum speed
[    2.162111]    8regs           : 13921 MB/sec
[    2.163056]    32regs          : 13569 MB/sec
[    2.163918]    arm64_neon      : 19529 MB/sec
[    2.164606] xor: using function: arm64_neon (19529 MB/sec)
[    2.172097] Btrfs loaded, zoned=no, fsverity=no
[    2.607148] usb 8-1: new SuperSpeed USB device number 2 using xhci-hcd
[    2.626246] usb-storage 8-1:1.0: USB Mass Storage device detected
[    2.629834] scsi host0: usb-storage 8-1:1.0
[    3.663235] scsi 0:0:0:0: Direct-Access     Logitec  LMD USB Device 
PMAP PQ: 0 ANSI: 6
[    3.674594] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 
GB/233 GiB)
[    3.679739] sd 0:0:0:0: [sda] Write Protect is off
[    3.682200] sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08
[    3.684495] sd 0:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
[    3.733716]  sda: sda1
[    3.736298] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.886295] EXT4-fs (sda1): mounted filesystem 
4310f77a-a5c1-43d3-83ee-3b3d9a2821be ro with ordered data mode. Quota 
mode: none.
[    4.070202] systemd[1]: System time before build time, advancing clock.
[    4.097302] NET: Registered PF_INET6 protocol family
[    4.098709] Segment Routing with IPv6
[    4.099476] In-situ OAM (IOAM) with IPv6
[    4.117652] systemd[1]: systemd 255.4-1ubuntu8.4 running in system 
mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT 
-GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC 
+KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 
+BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT 
default-hierarchy=unified)
[    4.122571] systemd[1]: Detected architecture arm64.
[    4.132140] systemd[1]: Hostname set to <radxa-test>.
[    4.312653] systemd[1]: Configuration file 
/run/systemd/system/netplan-ovs-cleanup.service is marked 
world-inaccessible. This has no effect as configuration data is 
accessible via APIs without restrictions. Proceeding anyway.
[    4.332846] systemd[1]: Configuration file 
/run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf 
is marked world-inaccessible. This has no effect as configuration data 
is accessible via APIs without restrictions. Proceeding anyway.
[    4.426530] systemd[1]: Queued start job for default target 
graphical.target.
[    4.472374] systemd[1]: Created slice system-modprobe.slice - Slice 
/system/modprobe.
[    4.479597] systemd[1]: Created slice system-serial\x2dgetty.slice - 
Slice /system/serial-getty.
[    4.487440] systemd[1]: Created slice user.slice - User and Session 
Slice.
[    4.495182] systemd[1]: Started systemd-ask-password-wall.path - 
Forward Password Requests to Wall Directory Watch.
[    4.503218] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary 
Executable File Formats File System Automount Point was skipped because 
of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc).
[    4.506541] systemd[1]: Expecting device dev-ttyS2.device - /dev/ttyS2...
[    4.515086] systemd[1]: Reached target integritysetup.target - Local 
Integrity Protected Volumes.
[    4.523126] systemd[1]: Reached target slices.target - Slice Units.
[    4.531079] systemd[1]: Reached target snapd.mounts-pre.target - 
Mounting snaps.
[    4.539075] systemd[1]: Reached target snapd.mounts.target - Mounted 
snaps.
[    4.547082] systemd[1]: Reached target swap.target - Swaps.
[    4.549178] systemd[1]: Reached target veritysetup.target - Local 
Verity Protected Volumes.
[    4.559230] systemd[1]: Listening on dm-event.socket - Device-mapper 
event daemon FIFOs.
[    4.567258] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll 
daemon socket.
[    4.575236] systemd[1]: Listening on multipathd.socket - multipathd 
control socket.
[    4.583231] systemd[1]: Listening on systemd-fsckd.socket - fsck to 
fsckd communication Socket.
[    4.591160] systemd[1]: Listening on systemd-initctl.socket - initctl 
Compatibility Named Pipe.
[    4.599251] systemd[1]: Listening on systemd-journald-dev-log.socket 
- Journal Socket (/dev/log).
[    4.607273] systemd[1]: Listening on systemd-journald.socket - 
Journal Socket.
[    4.615308] systemd[1]: Listening on systemd-networkd.socket - 
Network Service Netlink Socket.
[    4.623091] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension 
(Varlink) was skipped because of an unmet condition check 
(ConditionSecurity=measured-uki).
[    4.626393] systemd[1]: Listening on systemd-udevd-control.socket - 
udev Control Socket.
[    4.635216] systemd[1]: Listening on systemd-udevd-kernel.socket - 
udev Kernel Socket.
[    4.683249] systemd[1]: Mounting dev-hugepages.mount - Huge Pages 
File System...
[    4.692601] systemd[1]: Mounting dev-mqueue.mount - POSIX Message 
Queue File System...
[    4.700265] systemd[1]: Mounting sys-kernel-debug.mount - Kernel 
Debug File System...
[    4.707158] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File 
System was skipped because of an unmet condition check 
(ConditionPathExists=/sys/kernel/tracing).
[    4.713657] systemd[1]: Starting systemd-journald.service - Journal 
Service...
[    4.724529] systemd[1]: Starting keyboard-setup.service - Set the 
console keyboard layout...
[    4.732504] systemd[1]: Starting kmod-static-nodes.service - Create 
List of Static Device Nodes...
[    4.735684] systemd[1]: Starting lvm2-monitor.service - Monitoring of 
LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    4.748205] systemd[1]: Starting modprobe@configfs.service - Load 
Kernel Module configfs...
[    4.755958] systemd-journald[333]: Collecting audit messages is disabled.
[    4.756390] systemd[1]: Starting modprobe@dm_mod.service - Load 
Kernel Module dm_mod...
[    4.768391] systemd[1]: Starting modprobe@drm.service - Load Kernel 
Module drm...
[    4.776321] systemd[1]: Starting modprobe@efi_pstore.service - Load 
Kernel Module efi_pstore...
[    4.778189] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) 
initialised: dm-devel@lists.linux.dev
[    4.788285] systemd[1]: Starting modprobe@fuse.service - Load Kernel 
Module fuse...
[    4.796175] systemd[1]: Starting modprobe@loop.service - Load Kernel 
Module loop...
[    4.803138] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch 
configuration for cleanup was skipped because of an unmet condition 
check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
[    4.806262] systemd[1]: systemd-fsck-root.service - File System Check 
on Root Device was skipped because of an unmet condition check 
(ConditionPathExists=!/run/initramfs/fsck-root).
[    4.811929] systemd[1]: Starting systemd-modules-load.service - Load 
Kernel Modules...
[    4.817610] fuse: init (API version 7.41)
[    4.819071] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine 
ID Measurement was skipped because of an unmet condition check 
(ConditionSecurity=measured-uki).
[    4.824273] systemd[1]: Starting systemd-remount-fs.service - Remount 
Root and Kernel File Systems...
[    4.831083] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK 
Setup (Early) was skipped because of an unmet condition check 
(ConditionSecurity=measured-uki).
[    4.835720] systemd[1]: Starting systemd-udev-trigger.service - 
Coldplug All udev Devices...
[    4.845235] systemd[1]: Started systemd-journald.service - Journal 
Service.
[    4.877876] EXT4-fs (sda1): re-mounted 
4310f77a-a5c1-43d3-83ee-3b3d9a2821be r/w. Quota mode: none.
[    4.958994] random: crng init done
[    5.036442] systemd-journald[333]: Received client request to flush 
runtime journal.
[    5.076796] systemd-journald[333]: 
/var/log/journal/1d8fb168781745f7ad290e40a68bb043/system.journal: 
Realtime clock jumped backwards relative to last journal entry, rotating.
[    5.076806] systemd-journald[333]: Rotating system journal.
[    5.387408] mc: Linux media interface: v0.10
[    5.396844] videodev: Linux video capture interface: v2.00
[    5.418446] rockchip-thermal fec00000.tsadc: Missing rockchip,grf 
property
[    5.418762] cfg80211: Loading compiled-in X.509 certificates for 
regulatory database
[    5.423238] at24 2-0050: supply vcc not found, using dummy regulator
[    5.423989] hantro-vpu fdb50000.video-codec: Adding to iommu group 1
[    5.425492] hantro-vpu fdb50000.video-codec: registered 
rockchip,rk3568-vpu-dec as /dev/video0
[    5.426827] hantro-vpu fdba0000.video-codec: Adding to iommu group 2
[    5.426860] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.427186] hantro-vpu fdba0000.video-codec: registered 
rockchip,rk3588-vepu121-enc as /dev/video1
[    5.427366] Loaded X.509 cert 'wens: 
61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    5.431989] Bluetooth: Core ver 2.22
[    5.432563] NET: Registered PF_BLUETOOTH protocol family
[    5.432567] Bluetooth: HCI device and connection manager initialized
[    5.432573] Bluetooth: HCI socket layer initialized
[    5.432576] Bluetooth: L2CAP socket layer initialized
[    5.432583] Bluetooth: SCO socket layer initialized
[    5.440878] hantro-vpu fdba4000.video-codec: Adding to iommu group 3
[    5.441068] hantro-vpu fdba4000.video-codec: missing multi-core 
support, ignoring this instance
[    5.443673] hantro-vpu fdba8000.video-codec: Adding to iommu group 4
[    5.443751] hantro-vpu fdba8000.video-codec: missing multi-core 
support, ignoring this instance
[    5.443795] input: rk805 pwrkey as 
/devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
[    5.445075] hantro-vpu fdbac000.video-codec: Adding to iommu group 5
[    5.445133] hantro-vpu fdbac000.video-codec: missing multi-core 
support, ignoring this instance
[    5.453252] hantro-vpu fdc70000.video-codec: registered 
rockchip,rk3588-av1-vpu-dec as /dev/video2
[    5.482335] usbcore: registered new interface driver btusb
[    5.488889] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b 
lmp_ver=0b lmp_subver=8852
[    5.489892] Bluetooth: hci0: RTL: rom_version status=0 version=1
[    5.489899] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
[    5.493953] rtw89_8852be 0004:41:00.0: loaded firmware 
rtw89/rtw8852b_fw-1.bin
[    5.494079] ACPI: <n/a>: failed to evaluate _DSM 
e8c3a8d2-694b-004f-82bd-fe8607803aa7 rev:0 func:5 (0x1001)
[    5.494109] rtw89_8852be 0004:41:00.0: enabling device (0000 -> 0003)
[    5.498916] rtw89_8852be 0004:41:00.0: Firmware version 0.29.29.5 
(da87cccd), cmd version 0, type 5
[    5.498925] rtw89_8852be 0004:41:00.0: Firmware version 0.29.29.5 
(da87cccd), cmd version 0, type 3
[    5.499194] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
[    5.502299] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    5.503899] Bluetooth: hci0: RTL: cfg_sz 6, total sz 65603
[    5.544794] rk_gmac-dwmac fe1c0000.ethernet end0: Register 
MEM_TYPE_PAGE_POOL RxQ-0
[    5.545032] rk_gmac-dwmac fe1c0000.ethernet end0: Register 
MEM_TYPE_PAGE_POOL RxQ-1
[    5.554359] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    5.588977] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    5.614976] rk_gmac-dwmac fe1c0000.ethernet end0: PHY [stmmac-0:01] 
driver [RTL8211F Gigabit Ethernet] (irq=POLL)
[    5.621667] dwmac4: Master AXI performs any burst length
[    5.621683] rk_gmac-dwmac fe1c0000.ethernet end0: No Safety Features 
support found
[    5.621696] rk_gmac-dwmac fe1c0000.ethernet end0: IEEE 1588-2008 
Advanced Timestamp supported
[    5.621893] rk_gmac-dwmac fe1c0000.ethernet end0: registered PTP clock
[    5.622196] rk_gmac-dwmac fe1c0000.ethernet end0: configuring for 
phy/rgmii link mode
[    5.623647] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    5.781862] rtw89_8852be 0004:41:00.0: chip rfe_type is 1
[    5.809977] ACPI: <n/a>: failed to evaluate _DSM 
e8c3a8d2-694b-004f-82bd-fe8607803aa7 rev:0 func:6 (0x1001)
[    5.810363] rtw89_8852be 0004:41:00.0: rfkill hardware state changed 
to enable
[    5.813210] rtw89_8852be 0004:41:00.0 wlP4p65s0: renamed from wlan0
[    6.023955] Bluetooth: hci0: RTL: fw version 0x04479301
[    6.559624] Bluetooth: MGMT ver 1.23
[    6.565153] NET: Registered PF_ALG protocol family
[    6.813274] loop0: detected capacity change from 0 to 8
[    6.813690] Filesystem uses "xz" compression. This is not supported
[    7.338894] rockchip-drm display-subsystem: [drm] HDMI Sink doesn't 
support RGB, something's wrong.
[    9.742796] rk_gmac-dwmac fe1c0000.ethernet end0: Link is Up - 
1Gbps/Full - flow control rx/tx

> ---
>   arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 47 ++++++++++++++++++++++++
>   1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> index 87fce8d9a964cd53d179ce214ae1c0ff505a2dce..1fd122250b0c70e729b7a2239ab5f288a6387a70 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> @@ -5,6 +5,7 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/leds/common.h>
>   #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
>   #include "rk3588s.dtsi"
>   
>   / {
> @@ -35,6 +36,17 @@ chosen {
>   		stdout-path = "serial2:1500000n8";
>   	};
>   
> +	hdmi0-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi0_con_in: endpoint {
> +				remote-endpoint = <&hdmi0_out_con>;
> +			};
> +		};
> +	};
> +
>   	leds {
>   		compatible = "gpio-leds";
>   		pinctrl-names = "default";
> @@ -296,6 +308,26 @@ &gmac1_rgmii_clk
>   	status = "okay";
>   };
>   
> +&hdmi0 {
> +	status = "okay";
> +};
> +
> +&hdmi0_in {
> +	hdmi0_in_vp0: endpoint {
> +		remote-endpoint = <&vp0_out_hdmi0>;
> +	};
> +};
> +
> +&hdmi0_out {
> +	hdmi0_out_con: endpoint {
> +		remote-endpoint = <&hdmi0_con_in>;
> +	};
> +};
> +
> +&hdptxphy_hdmi0 {
> +	status = "okay";
> +};
> +
>   &mdio1 {
>   	rgmii_phy1: ethernet-phy@1 {
>   		/* RTL8211F */
> @@ -788,3 +820,18 @@ &usb_host1_ohci {
>   &usb_host2_xhci {
>   	status = "okay";
>   };
> +
> +&vop_mmu {
> +	status = "okay";
> +};
> +
> +&vop {
> +	status = "okay";
> +};
> +
> +&vp0 {
> +	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> +		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> +		remote-endpoint = <&hdmi0_in_vp0>;
> +	};
> +};

Re: [PATCH UNTESTED 5/5] arm64: dts: rockchip: Enable HDMI0 on rock-5a

[FUKAUMI Naoki]

Hi,

On 10/19/24 06:39, Cristian Ciocaltea wrote:
> Add the necessary DT changes to enable HDMI0 on Rock 5A.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> ---
>   arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 47 ++++++++++++++++++++++++
>   1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> index 87fce8d9a964cd53d179ce214ae1c0ff505a2dce..1fd122250b0c70e729b7a2239ab5f288a6387a70 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> @@ -5,6 +5,7 @@
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/leds/common.h>
>   #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
>   #include "rk3588s.dtsi"
>   
>   / {
> @@ -35,6 +36,17 @@ chosen {
>   		stdout-path = "serial2:1500000n8";
>   	};
>   
> +	hdmi0-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi0_con_in: endpoint {
> +				remote-endpoint = <&hdmi0_out_con>;
> +			};
> +		};
> +	};
> +
>   	leds {
>   		compatible = "gpio-leds";
>   		pinctrl-names = "default";
> @@ -296,6 +308,26 @@ &gmac1_rgmii_clk
>   	status = "okay";
>   };
>   
> +&hdmi0 {
> +	status = "okay";
> +};

on ROCK 5A, HPD pin is different.

how about this?

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts 
b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index f4293d666368..600028fcad88 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -314,6 +314,9 @@ &gmac1_rgmii_clk
  };

  &hdmi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmim0_tx0_cec &hdmim1_tx0_hpd
+		     &hdmim0_tx0_scl &hdmim0_tx0_sda>;
  	status = "okay";
  };


(I don't know why HDMI worked on ROCK 5C... it should be same as 5A)

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

> +&hdmi0_in {
> +	hdmi0_in_vp0: endpoint {
> +		remote-endpoint = <&vp0_out_hdmi0>;
> +	};
> +};
> +
> +&hdmi0_out {
> +	hdmi0_out_con: endpoint {
> +		remote-endpoint = <&hdmi0_con_in>;
> +	};
> +};
> +
> +&hdptxphy_hdmi0 {
> +	status = "okay";
> +};
> +
>   &mdio1 {
>   	rgmii_phy1: ethernet-phy@1 {
>   		/* RTL8211F */
> @@ -788,3 +820,18 @@ &usb_host1_ohci {
>   &usb_host2_xhci {
>   	status = "okay";
>   };
> +
> +&vop_mmu {
> +	status = "okay";
> +};
> +
> +&vop {
> +	status = "okay";
> +};
> +
> +&vp0 {
> +	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
> +		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> +		remote-endpoint = <&hdmi0_in_vp0>;
> +	};
> +};

Re: [PATCH UNTESTED 5/5] arm64: dts: rockchip: Enable HDMI0 on rock-5a

[Cristian Ciocaltea]

On 10/19/24 7:42 AM, FUKAUMI Naoki wrote:
> Hi,
> 
> On 10/19/24 06:39, Cristian Ciocaltea wrote:
>> Add the necessary DT changes to enable HDMI0 on Rock 5A.
>>
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
>> ---
>>   arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 47 ++++++++++++++
>> ++++++++++
>>   1 file changed, 47 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/
>> arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
>> index
>> 87fce8d9a964cd53d179ce214ae1c0ff505a2dce..1fd122250b0c70e729b7a2239ab5f288a6387a70 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
>> @@ -5,6 +5,7 @@
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/leds/common.h>
>>   #include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/soc/rockchip,vop2.h>
>>   #include "rk3588s.dtsi"
>>     / {
>> @@ -35,6 +36,17 @@ chosen {
>>           stdout-path = "serial2:1500000n8";
>>       };
>>   +    hdmi0-con {
>> +        compatible = "hdmi-connector";
>> +        type = "a";
>> +
>> +        port {
>> +            hdmi0_con_in: endpoint {
>> +                remote-endpoint = <&hdmi0_out_con>;
>> +            };
>> +        };
>> +    };
>> +
>>       leds {
>>           compatible = "gpio-leds";
>>           pinctrl-names = "default";
>> @@ -296,6 +308,26 @@ &gmac1_rgmii_clk
>>       status = "okay";
>>   };
>>   +&hdmi0 {
>> +    status = "okay";
>> +};
> 
> on ROCK 5A, HPD pin is different.
> 
> how about this?
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/
> arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> index f4293d666368..600028fcad88 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> @@ -314,6 +314,9 @@ &gmac1_rgmii_clk
>  };
> 
>  &hdmi0 {
> +    pinctrl-names = "default";
> +    pinctrl-0 = <&hdmim0_tx0_cec &hdmim1_tx0_hpd
> +             &hdmim0_tx0_scl &hdmim0_tx0_sda>;
>      status = "okay";
>  };
> 

Thanks for figuring this out!

Regards,
Cristian