* hci reset on init
@ 2008-03-03 1:41 Dave Young
2008-03-03 10:56 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: Dave Young @ 2008-03-03 1:41 UTC (permalink / raw)
To: Marcel Holtmann; +Cc: linux-bluetooth, Linux Kernel, David Miller
Hi, marcel
Recently, I find my usb bluetooth dongle doesn't work after reboot or resume.
Kernel report (with bluetooth mouse active):
Feb 15 16:54:32 darkstar kernel: hci_acldata_packet: hci0 ACL packet for unknown
connection handle 43
Feb 15 16:54:34 darkstar last message repeated 124 times
I fixed it by adding HCI_RESET to CSR usb id:
{ USB_DEVICE(0x0a12, 0x0001), .driver_info = HCI_CSR |HCI_RESET},
Maybe you have known that there's other reports about this on
bluetooth list as well.
Most of the ids in hci_usb.c have the HCI_RESET option set. Does we
need to do this automaticly? I want to know whether sending reset
request on init in hci_core.c is better, or at least the btusb driver
need these porting.
What's your opinion?
Regards
dave
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: hci reset on init
2008-03-03 1:41 hci reset on init Dave Young
@ 2008-03-03 10:56 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2008-03-03 10:56 UTC (permalink / raw)
To: Dave Young; +Cc: linux-bluetooth, Linux Kernel, David Miller
Hi Dave,
> Recently, I find my usb bluetooth dongle doesn't work after reboot
> or resume.
>
> Kernel report (with bluetooth mouse active):
>
> Feb 15 16:54:32 darkstar kernel: hci_acldata_packet: hci0 ACL packet
> for unknown
> connection handle 43
> Feb 15 16:54:34 darkstar last message repeated 124 times
>
> I fixed it by adding HCI_RESET to CSR usb id:
> { USB_DEVICE(0x0a12, 0x0001), .driver_info = HCI_CSR |
> HCI_RESET},
>
> Maybe you have known that there's other reports about this on
> bluetooth list as well.
>
> Most of the ids in hci_usb.c have the HCI_RESET option set. Does we
> need to do this automaticly? I want to know whether sending reset
> request on init in hci_core.c is better, or at least the btusb driver
> need these porting.
>
> What's your opinion?
this is a clear NAK since you gonna break all old CSR based dongles.
Within the Bluetooth 1.0b and 1.1 specification there was an issues
with if HCI_Reset should only reset the Bluetooth internals or also
the transport. So issuing HCI_Reset on an old dongle will cause an USB
reset.
The solution is to find the build id when CSR produced correct
firmware and set the HCI_RESET quirk based on that. I meant to do this
for a long time, but so far never got around to inquiry the correct
build id where this got fixed.
Regards
Marcel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-03-03 10:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-03 1:41 hci reset on init Dave Young
2008-03-03 10:56 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®