Re: [PATCH] ipmi: ipmb: initialise event handler read bytes

[Corey Minyard <corey@minyard.net>]

On Wed, Jan 14, 2026 at 10:10:34AM +0800, Matt Johnston wrote:
> Hi Corey,
> 
> On Tue, 2026-01-13 at 10:00 -0600, Corey Minyard wrote:
> > On Tue, Jan 13, 2026 at 05:41:34PM +0800, Matt Johnston wrote:
> > > IPMB doesn't use i2c reads, but the handler needs to set a value.
> > > Otherwise an i2c read will return an uninitialised value from the bus
> > > driver.
> > 
> > This is fine, I suppose.  It's probably better to do this.
> > 
> > Are you actually using this code?  How was it found?
> 
> I'm not using IPMB, so haven't tested the patch on hardware.
> We received a patch for mctp-i2c read handling, that made me notice 
> the uninitialised value problem there. I had a look over other 
> i2c_slave_register() kernel users to see if the problem was common
> (mctp-i2c used ipmi-ipmb as a bit of a reference during development too).

Ok, thanks for the history on this.  It's in my tree.

-corey

> 
> https://lore.kernel.org/netdev/20260108101829.1140448-1-
> zhangjian.3032@bytedance.com/
> https://lore.kernel.org/netdev/20260113-mctp-read-fix-v1-1-
> 70c4b59c741c@codeconstruct.com.au/
> 
> Cheers,
> Matt
>