Re: [PATCH 4/4] arm64: dts: imx8mp-kontron: Use GPIO/IRQ defines in DL devicetree

[Frank Li <Frank.li@nxp.com>]

On Wed, Feb 18, 2026 at 02:25:08PM +0100, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
>
> To make the code more readable, use the macros for the GPIO and IRQ
> settings.
>
> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
> index 7131e9a499ae1..41a2bb74f1565 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
> @@ -7,6 +7,7 @@
>  /plugin/;
>
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>  #include "imx8mp-pinfunc.h"
>
>  &{/} {
> @@ -80,11 +81,11 @@ touchscreen@5d {
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&pinctrl_touch>;
>  		interrupt-parent = <&gpio1>;
> -		interrupts = <6 8>;
> -		irq-gpios = <&gpio1 6 0>;
> +		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
> +		irq-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
>  		AVDD28-supply = <&reg_vcc_panel>;
>  		VDDIO-supply = <&reg_vcc_panel>;
> -		reset-gpios = <&gpio1 7 0>;
> +		reset-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
>  	};
>  };
>
> --
> 2.52.0
>