[PATCH V2 0/3] arm64: dts: qcom: Monaco: Enable SDHCI storage support

[PATCH V2 0/3] arm64: dts: qcom: Monaco: Enable SDHCI storage support

[Monish Chunara]

Hello respected Maintainers,

This is v2 of the Monaco SDHCI storage support series.

V1 was sent here:
https://lore.kernel.org/all/20260227105055.2364348-1-monish.chunara@oss.qualcomm.com/

Compared to v1, this revision makes the storage split more explicit and keeps
the SoC description generic:
- Avoids using the reference to direct supplies as dummy
- Updates the eMMC overlay to remove the static UFS host disablement and
  vreg_l8a voltage override, allowing DT-fixup to manage the UFS-eMMC mutual
  exclusion dynamically for flexible UFS/eMMC configurations.

Validated on Qualcomm Monaco EVK with both SD card and eMMC modules.

Monish Chunara (3):
  arm64: dts: qcom: monaco: Move eMMC CQE support from SoC to board DT
  arm64: dts: qcom: monaco-evk: Enable SDHCI for SD Card via overlay
  arm64: dts: qcom: monaco-evk: Add SDHCI support for eMMC via overlay

 arch/arm64/boot/dts/qcom/Makefile             |  7 ++
 arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso | 37 ++++++++++
 .../boot/dts/qcom/monaco-evk-sd-card.dtso     | 72 +++++++++++++++++++
 arch/arm64/boot/dts/qcom/monaco.dtsi          |  1 -
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts     |  1 +
 5 files changed, 117 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso
 create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-sd-card.dtso

-- 
2.34.1

[PATCH V2 1/3] arm64: dts: qcom: monaco: Move eMMC CQE support from SoC to board DT

[Monish Chunara]

The Monaco SoC SDHC controller supports both eMMC and SD cards. However,
the 'supports-cqe' property (Command Queue Engine) is specific to eMMC
and conflicts with SD card operation.

Remove 'supports-cqe' from the SoC device tree to ensure compatibility
with SD cards. Simultaneously, add the property explicitly to the
qcs8300-ride board device tree, as this board uses the controller in
eMMC mode.

This ensures the SoC definition remains generic while enabling features
correctly at the board level.

Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/monaco.dtsi      | 1 -
 arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi
index e4c8466f941b..e82cba350842 100644
--- a/arch/arm64/boot/dts/qcom/monaco.dtsi
+++ b/arch/arm64/boot/dts/qcom/monaco.dtsi
@@ -4832,7 +4832,6 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 			qcom,dll-config = <0x000f64ee>;
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
-			supports-cqe;
 			dma-coherent;
 
 			mmc-ddr-1_8v;
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index e9a8553a8d82..3090eba0317a 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -719,6 +719,7 @@ &sdhc_1 {
 	vmmc-supply = <&vreg_l8a>;
 	vqmmc-supply = <&vreg_s4a>;
 
+	supports-cqe;
 	non-removable;
 	no-sd;
 	no-sdio;
-- 
2.34.1

[PATCH V2 2/3] arm64: dts: qcom: monaco-evk: Enable SDHCI for SD Card via overlay

[Monish Chunara]

The monaco EVK board supports either eMMC or SD-card, but only one
can be active at a time.

Enable the SD Host Controller Interface (SDHCI) on the monaco EVK board
to support SD Card for storage via a device tree overlay. This allows
eMMC support to be enabled through a separate overlay when required.

Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |  4 ++
 .../boot/dts/qcom/monaco-evk-sd-card.dtso     | 72 +++++++++++++++++++
 2 files changed, 76 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-sd-card.dtso

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6f33c4e2f09c..3c5983bff00c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -69,6 +69,10 @@ monaco-evk-el2-dtbs := monaco-evk.dtb monaco-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk-el2.dtb
 monaco-evk-ifp-mezzanine-dtbs	:= monaco-evk.dtb monaco-evk-ifp-mezzanine.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk-ifp-mezzanine.dtb
+
+monaco-evk-sd-card-dtbs := monaco-evk.dtb monaco-evk-sd-card.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-sd-card.dtb
+
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-sd-card.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-sd-card.dtso
new file mode 100644
index 000000000000..bc4ea12587a2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-evk-sd-card.dtso
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+        vmmc_sdc: regulator-mmc-sdc {
+                compatible = "regulator-fixed";
+
+                regulator-name = "vmmc_sdc";
+                regulator-min-microvolt = <2950000>;
+                regulator-max-microvolt = <2950000>;
+        };
+
+        vreg_sdc: regulator-sdc {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vreg_sdc";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpios = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>, <2950000 0>;
+
+		startup-delay-us = <100>;
+        };
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vmmc_sdc>;
+	vqmmc-supply = <&vreg_sdc>;
+
+	pinctrl-0 = <&sdc1_state_on>, <&sd_cd>;
+	pinctrl-1 = <&sdc1_state_off>, <&sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	cap-sd-highspeed;
+	no-1-8-v;
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+
+	status = "okay";
+};
+
+&sdhc1_opp_table {
+	opp-100000000 {
+		opp-hz = /bits/ 64 <100000000>;
+		required-opps = <&rpmhpd_opp_low_svs>;
+	};
+
+	opp-202000000 {
+		opp-hz = /bits/ 64 <202000000>;
+		required-opps = <&rpmhpd_opp_svs_l1>;
+	};
+};
+
+&tlmm {
+        sd_cd: sd-cd-state {
+                pins = "gpio11";
+                function = "gpio";
+                bias-pull-up;
+        };
+};
-- 
2.34.1

[PATCH V2 3/3] arm64: dts: qcom: monaco-evk: Add SDHCI support for eMMC via overlay

[Monish Chunara]

Enable the SDHCI controller for eMMC functionality on the Monaco EVK
using a device tree overlay.

Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |  3 ++
 arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso | 37 +++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 3c5983bff00c..e9a21c83001c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -73,6 +73,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk-ifp-mezzanine.dtb
 monaco-evk-sd-card-dtbs := monaco-evk.dtb monaco-evk-sd-card.dtbo
 dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-sd-card.dtb
 
+monaco-evk-emmc-dtbs := monaco-evk.dtb monaco-evk-emmc.dtbo
+dtb-$(CONFIG_ARCH_QCOM) += monaco-evk-emmc.dtb
+
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso
new file mode 100644
index 000000000000..cb2566ac6923
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-evk-emmc.dtso
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+        vreg_s2s: regulator-vreg-s2s {
+                compatible = "regulator-fixed";
+                regulator-name = "regulator-s2s";
+
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+        };
+};
+
+&sdhc_1 {
+	vmmc-supply = <&vreg_l8a>;
+	vqmmc-supply = <&vreg_s2s>;
+
+	supports-cqe;
+
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+
+	pinctrl-names = "default", "sleep";
+
+	non-removable;
+
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
-- 
2.34.1

Re: [PATCH V2 1/3] arm64: dts: qcom: monaco: Move eMMC CQE support from SoC to board DT

[Konrad Dybcio]

On 6/16/26 3:03 PM, Monish Chunara wrote:
> The Monaco SoC SDHC controller supports both eMMC and SD cards. However,
> the 'supports-cqe' property (Command Queue Engine) is specific to eMMC
> and conflicts with SD card operation.
> 
> Remove 'supports-cqe' from the SoC device tree to ensure compatibility
> with SD cards. Simultaneously, add the property explicitly to the
> qcs8300-ride board device tree, as this board uses the controller in
> eMMC mode.
> 
> This ensures the SoC definition remains generic while enabling features
> correctly at the board level.
> 
> Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/monaco.dtsi      | 1 -
>  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 1 +

Please also fix up monaco-monza-som.dtsi

Konrad

Re: [PATCH V2 1/3] arm64: dts: qcom: monaco: Move eMMC CQE support from SoC to board DT

[Monish Chunara]

On Wed, Jun 17, 2026 at 12:17:28PM +0200, Konrad Dybcio wrote:
> On 6/16/26 3:03 PM, Monish Chunara wrote:
> > The Monaco SoC SDHC controller supports both eMMC and SD cards. However,
> > the 'supports-cqe' property (Command Queue Engine) is specific to eMMC
> > and conflicts with SD card operation.
> > 
> > Remove 'supports-cqe' from the SoC device tree to ensure compatibility
> > with SD cards. Simultaneously, add the property explicitly to the
> > qcs8300-ride board device tree, as this board uses the controller in
> > eMMC mode.
> > 
> > This ensures the SoC definition remains generic while enabling features
> > correctly at the board level.
> > 
> > Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
> > ---
> >  arch/arm64/boot/dts/qcom/monaco.dtsi      | 1 -
> >  arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 1 +
> 
> Please also fix up monaco-monza-som.dtsi
>

Sure, updated in v3: https://lore.kernel.org/all/20260701081715.2580329-1-monish.chunara@oss.qualcomm.com/

Regards,
Monish