mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Samiullah Khawaja <skhawaja@google.com>
To: Baolu Lu <baolu.lu@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Joerg Roedel <joro@8bytes.org>,  Will Deacon <will@kernel.org>,
	Jason Gunthorpe <jgg@ziepe.ca>,
	 Robin Murphy <robin.murphy@arm.com>,
	Kevin Tian <kevin.tian@intel.com>,
	 Alex Williamson <alex@shazbot.org>,
	Shuah Khan <shuah@kernel.org>,
	iommu@lists.linux.dev,  linux-kernel@vger.kernel.org,
	kvm@vger.kernel.org, Pratyush Yadav <pratyush@kernel.org>,
	 Pasha Tatashin <pasha.tatashin@soleen.com>,
	David Matlack <dmatlack@google.com>,
	 Andrew Morton <akpm@linux-foundation.org>,
	Pranjal Shrivastava <praan@google.com>,
	 Vipin Sharma <vipinsh@google.com>
Subject: Re: [PATCH v4 08/18] iommu/vt-d: Clear unpreserved context entries during shutdown
Date: Thu, 27 Aug 2026 18:57:28 +0000	[thread overview]
Message-ID: <apCGj7ePWtmpnOzk@google.com> (raw)
In-Reply-To: <5862e3cc-e7e4-43be-a829-8569d12d6bb4@linux.intel.com>

On Thu, Aug 27, 2026 at 02:09:26PM +0800, Baolu Lu wrote:
>On 8/27/26 04:30, Samiullah Khawaja wrote:
>>
>>>>+static void clear_unpreserved_context(struct device_domain_info 
>>>>*info, u8 bus, u8 devfn)
>>>>+{
>>>>+    struct context_entry *context;
>>>>+
>>>>+    /*
>>>>+     * This cleanup is done during shutdown, so it should be 
>>>>fine to only
>>>>+     * clear the entries here and issue one global invalidation 
>>>>later to
>>>>+     * invalidate all cleared entries.
>>>>+     *
>>>>+     * Note that the device IOTLB invalidation for unpreserved 
>>>>devices is
>>>>+     * skipped this way, but that should not be needed as the 
>>>>devices are
>>>>+     * quiesced at this point. This should improve the 
>>>>performance of the
>>>>+     * cleanup process and avoids any invalidation timeouts 
>>>>because drivers
>>>>+     * might have moved devices to D3 state.
>>>>+     */
>>>>+    context = iommu_context_addr(info->iommu, bus, devfn, 0);
>>>>+    if (context) {
>>>>+        context_clear_entry(context);
>>>>+        __iommu_flush_cache(info->iommu, context, sizeof(*context));
>>>
>>>For tearing down a present context entry, please follow the VT-d
>>>recommended sequence:
>>>
>>>- clear only the Present bit,
>>>- flush the updated entry to memory if necessary,
>>>- issue the required cache invalidations,
>>
>>Do we still need the individual cache invalidations if we issue global
>>invalidations (context, pasid-cache and iotlb), after clearing all
>>entries, as they would be done if a new root table was being setup?
>>
>>Looking at the VT-d specs (Invalidation of Translation Caches), each
>>invalidation type (cache, pasid and iotlb) defines granularity in both
>>register and queue based interface. And the granularity indicates that
>>Global invalidations clear the cached entries for that specific type.
>>For example following text is used for each cache type (in queue
>>interface):
>>
>>   Context-cache:
>>   Global Invalidation (01b): All context-cache entries cached at the
>>   remapping hardware are invalidated.
>>
>>   Pasid-cache:
>>   Global Invalidation (11b): All PASID-cache entries are invalidated.
>>
>>   Iotlb:
>>   Global Invalidation (01b):
>>   - All IOTLB entries are invalidated.
>>   - All paging-structure-cache entries are invalidated.
>>
>>A similar note about using Global invalidation is suggested in the specs
>>when setting up root table (Set Root Table Pointer Operation).
>>
>>   ... software must perform a global invalidate of the contextcache,
>>   PASID-cache (if applicable), and IOTLB, in that order. This is
>>   required to ensure hardware references only the remapping structures
>>   referenced by the new root table pointer and not stale cached entries.
>>
>>Also please note that this is happening during dmar unit teardown and
>>system shutdown, and while the context table entries in root table are
>>being cleared, the memory is not freed until the global invalidation is
>>issued.
>>
>>Since this is during shutdown, issuing global invalidations instead of
>>multiple individual invalidations for devices and aliases is simpler and
>>would likely also have shutdown time improvements and reduce the
>>blackout time during liveupdate.
>>
>>Please let me know if my global invalidations and granularity
>>understanding is not correct.
>
>The global-invalidation approach (similar to the “set new root table”
>flow) looks correct to me.
>
>On the device side: if ATS is enabled, some translations may still be
>cached in the device. My understanding is that unpreserved devices are
>already DMA-quiesced and then go through reset + reprobe (as in a normal
>reboot), which should flush those device-side caches. Are we aligned on
>that assumption?

Yes, we are aligned on it. I already added a note about unpreserved
devices being quiesced at this point, in a comment above in this
function.
>
>>
>>I added a comment at the top of this function to explain this, let me
>>know if you want me to expand it with more details.
>>
>>>- then clear the remaining fields of the entry.
>
>One important point remains: even if cache invalidation is deferred and
>done globally, we should still clear the Present bit before clearing the
>rest of a context entry. While Present is set, hardware may fetch the
>256-bit entry in multiple chunks. Rewriting the full entry is not atomic
>(it becomes multiple CPU writes), so hardware could observe a torn value
>(a mix of old and new fields), which may lead to undefined behavior or
>spurious faults.

Ah yes, I wanted to write that in my previous reply but it seems I
missed that.
>
>So the recommended sequence is:
>- clear only the Present bit,
>- flush the updated entry to memory if necessary,
>- [add a comment about the delayed global invalidation approach,]
>- then clear the remaining fields of the entry.

This is exactly my plan for the next revision. We are aligned on it.
>
>Thanks,
>baolu
>

Thanks,
Sami

  reply	other threads:[~2026-08-27 18:57 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-08  2:27 [PATCH v4 00/18] iommu: Add live update state preservation Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 01/18] memfd: export memfd_get_seals() Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 02/18] iommu: Implement IOMMU Live update FLB callbacks Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 03/18] iommu/pages: Add APIs to preserve/unpreserve/restore iommu pages Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 04/18] iommupt: Implement preserve/unpreserve/restore callbacks Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 05/18] iommu: Implement IOMMU domain preservation Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 06/18] iommu: Implement device and IOMMU HW preservation Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 07/18] iommu/vt-d: Implement device and iommu preserve/unpreserve ops Samiullah Khawaja
2026-08-26  7:10   ` Baolu Lu
2026-08-26 20:46     ` Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 08/18] iommu/vt-d: Clear unpreserved context entries during shutdown Samiullah Khawaja
2026-08-26  8:05   ` Baolu Lu
2026-08-26 12:30     ` Pranjal Shrivastava
2026-08-26 20:37       ` Samiullah Khawaja
2026-08-26 20:30     ` Samiullah Khawaja
2026-08-27  6:09       ` Baolu Lu
2026-08-27 18:57         ` Samiullah Khawaja [this message]
2026-08-08  2:27 ` [PATCH v4 09/18] iommu: Add APIs to get iommu and device preserved state Samiullah Khawaja
2026-08-12  6:29   ` Ankit Soni
2026-08-12 23:23     ` Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 10/18] iommu/vt-d: Restore IOMMU state and reclaimed domain ids Samiullah Khawaja
2026-08-27  7:22   ` Baolu Lu
2026-08-27 18:47     ` Samiullah Khawaja
2026-08-28  1:36       ` Baolu Lu
2026-08-08  2:27 ` [PATCH v4 11/18] iommu: Restore and reattach preserved domains to devices Samiullah Khawaja
2026-08-14 16:59   ` Ankit Soni
2026-08-14 19:46     ` Samiullah Khawaja
2026-08-17 15:32       ` Ankit Soni
2026-08-08  2:27 ` [PATCH v4 12/18] iommu/vt-d: Handle reattach of the restored domain Samiullah Khawaja
2026-08-27  8:12   ` Baolu Lu
2026-08-27 17:52     ` Samiullah Khawaja
2026-08-28  1:42       ` Baolu Lu
2026-08-28  1:55       ` Baolu Lu
2026-08-28 14:35         ` Jason Gunthorpe
2026-08-28 16:15           ` Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 13/18] iommu/vt-d: Preserve PASID table of preserved device Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 14/18] iommufd: Implement ioctl to mark HWPT for preservation Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 15/18] iommufd: Persist iommu hardware pagetables for live update Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 16/18] iommufd: Add APIs to preserve/unpreserve a vfio cdev Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 17/18] vfio/pci: Preserve the iommufd state of the " Samiullah Khawaja
2026-08-08  2:27 ` [PATCH v4 18/18] iommufd/selftest: Add test to verify iommufd preservation Samiullah Khawaja
2026-08-26  8:12 ` [PATCH v4 00/18] iommu: Add live update state preservation David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=apCGj7ePWtmpnOzk@google.com \
    --to=skhawaja@google.com \
    --cc=akpm@linux-foundation.org \
    --cc=alex@shazbot.org \
    --cc=baolu.lu@linux.intel.com \
    --cc=dmatlack@google.com \
    --cc=dwmw2@infradead.org \
    --cc=iommu@lists.linux.dev \
    --cc=jgg@ziepe.ca \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pasha.tatashin@soleen.com \
    --cc=praan@google.com \
    --cc=pratyush@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=shuah@kernel.org \
    --cc=vipinsh@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®